| Age | Commit message (Collapse) | Author |
|
Adding lockdep checking to the coredump code showed that there was an
existing violation. The dev_coredumpm_timeout() call is used to
register the dump with the base coredump subsystem. However, that
makes multiple memory allocations, only some of which use the GFP_
flags passed in. So that also needs to be deferred to the worker
function where it is safe to allocate with arbitrary flags.
In order to not add protoypes for the callback functions, moving the
_timeout call also means moving the worker thread function to later in
the file.
v2: Rebased after other changes to the worker function.
Fixes: e799485044cb ("drm/xe: Introduce the dev_coredump infrastructure.")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: intel-xe@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-3-John.C.Harrison@Intel.com
(cherry picked from commit 90f51a7f4ec1004fc4ddfbc6d1f1068d85ef4771)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Fix missing initial value for last_value.
For GuC capture register definition, it is required to define 64bit
register in a pair of 2 consecutive 32bit register entries, low first,
then hi. Add code to check this order.
Changes from prior revs:
v5:- Correct cross-line comment format
v4:- Fix warn on condition and remove skipping
v3:- Move break inside brace
v2:- Correct the fix tag pointed commit
Add examples in comments for warning
Add 1 missing hi condition check
Fixes: ecb633646391 ("drm/xe/guc: Plumb GuC-capture into dev coredump")
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241126201052.1937079-1-zhanjun.dong@intel.com
(cherry picked from commit 6f59fbcfa041e7d69e5e5f39d4c8cffa06fdc50b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
In pll_get_integloop_gain(), digclk_divsel=1 or 2, base=63 or 196ULL,
so the base may be 63, 126, 196, 392. The condition base <= 2046
always true.
Fixes: caedbf17c48d ("drm/msm: add msm8998 hdmi phy/pll support")
Signed-off-by: Rex Nie <rex.nie@jaguarmicro.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/624153/
Link: https://lore.kernel.org/r/20241112074101.2206-1-rex.nie@jaguarmicro.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
The msm_dp_utils_pack_sdp_header() accepts an unlimited-size u32 pointer
for the header output, while it expects a two-element array. It performs
a sizeof check which is always true on 64-bit platforms (since
sizeof(u32*) is 8) and is always false on 32-bit platforms. It returns
an error code which nobody actually checks.
Fix the function interface to accept u32[2] and return void, skipping
all the checks.
Fixes: 55fb8ffc1802 ("drm/msm/dp: add VSC SDP support for YUV420 over DP")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/626806/
Link: https://lore.kernel.org/r/20241202-fd-dp-audio-fixup-v2-2-d9187ea96dad@linaro.org
[quic_abhinavk@quicinc.com: minor fix in the commit message]
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Rather than printing random garbage from stack and pretending that it is
the default safe_to_exit_level, set the variable beforehand.
Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411081748.0PPL9MIj-lkp@intel.com/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/626804/
Link: https://lore.kernel.org/r/20241202-fd-dp-audio-fixup-v2-1-d9187ea96dad@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
There are now multiple places that can trigger a coredump. Some of
which can happen in parallel. There is already a check against
capturing multiple dumps sequentially, but without locking it doesn't
guarantee to work against concurrent dumps. And if two dumps do happen
in parallel, they can end up doing Bad Things such as one call stack
freeing the data the other call stack is still processing. Which leads
to a crashed kernel.
Further, it is possible for the DRM timeout to expire and trigger a
free of the capture while a user is still reading that capture out
through sysfs. Again leading to dodgy pointer problems.
So, add a mutext lock around the capture, read and free functions to
prevent inteference.
v2: Swap tiny scope spin_lock for larger scope mutex and fix
kernel-doc comment (review feedback from Matthew Brost)
v3: Move mutex locks to exclude worker thread and add reclaim
annotation (review feedback from Matthew Brost)
v4: Fix typo.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-4-John.C.Harrison@Intel.com
|
|
Adding lockdep checking to the coredump code showed that there was an
existing violation. The dev_coredumpm_timeout() call is used to
register the dump with the base coredump subsystem. However, that
makes multiple memory allocations, only some of which use the GFP_
flags passed in. So that also needs to be deferred to the worker
function where it is safe to allocate with arbitrary flags.
In order to not add protoypes for the callback functions, moving the
_timeout call also means moving the worker thread function to later in
the file.
v2: Rebased after other changes to the worker function.
Fixes: e799485044cb ("drm/xe: Introduce the dev_coredump infrastructure.")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: intel-xe@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-3-John.C.Harrison@Intel.com
|
|
There are debug level prints giving more information about the cause
of the hang immediately before core dumps are created. However, not
everyone has debug level prints enabled or saves the dmesg log at all.
So include that information in the dump file itself. Also, at least
one of those prints included the pid as well as the process name. So
include that in the capture too.
v2: Fix kvfree vs kfree and missing kernel-doc (review feedback from
Matthew Brost)
v3: Use GFP_ATOMIC instead of GFP_KERNEL.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-2-John.C.Harrison@Intel.com
|
|
smu->workload_mask is IP specific and should not be messed with in
the common code. The mask bits vary across SMU versions.
Move all handling of smu->workload_mask in to the backends and
simplify the code. Store the user's preference in smu->power_profile_mode
which will be reflected in sysfs. For internal driver profile
switches for KFD or VCN, just update the workload mask so that the
user's preference is retained. Remove all of the extra now unused
workload related elements in the smu structure.
v2: use refcounts for workload profiles
v3: rework based on feedback from Lijo
v4: fix the refcount on failure, drop backend mask
v5: rework custom handling
v6: handle failure cleanup with custom profile
v7: Update documentation
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
This reverts commit 74e1006430a5377228e49310f6d915628609929e.
This causes a regression in the workload selection.
A more extensive fix is being worked on.
For now, revert.
This came back after a merge in 6.13-rc1, so revert again.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3618
Fixes: 74e1006430a5 ("drm/amd/pm: correct the workload setting")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 44f392fbf628a7ff2d8bb8e83ca1851261f81a6f)
|
|
Use found block to call correct init/resume function on the block.
Set status.hw for resume and init.
Print re-init result again. Change to use dev_info.
Use amdgpu_device_ip_get_ip_block to get target block instead of
loop.
Fixes: 502d76308d45 ("drm/amdgpu: validate resume before function call")
Signed-off-by: Yiqing Yao <YiQing.Yao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ISP hw_init is not called with the recent changes related
to hw init levels. AMDGPU_INIT_LEVEL_DEFAULT is ignoring
the ISP IP block as AMDGPU_IP_BLK_MASK_ALL is derived using
incorrect max number of IP blocks.
Update AMDGPU_IP_BLK_MASK_ALL to use AMDGPU_MAX_IP_NUM
instead of (AMDGPU_MAX_IP_NUM - 1) to fix the issue.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Fixes: 14f2fe34f5c6 ("drm/amdgpu: Add init levels")
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Some DSC timing failed at bandwidth validation due to hactive
can't be evenly divided on each ODM segment.
[HOW]
Borrow from hblank to increase hactive to support these timing.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
Hardware does not support the VTotal to be between fp2 lines of the
maximum possible VTotal, so add a capability flag to track it and apply
where necessary.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
The minimum value of the dst_y_prefetch_equ was not correct
in prefetch calculation whice causes OPTC underflow.
[HOW]
Add the min operation of dst_y_prefetch_equ in prefetch calculation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
For better power profiling knowing the detile
buffer size at a given point in time
would be useful.
[HOW]
Add interface to retrieve detile buffer from
dc state.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Sung Lee <Sung.Lee@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
On some cards when odm is used, the monitor will have 2 separate pipes
split vertically. When compression is used on the YCbCr colour space on
the second pipe to have correct colours, we need to read a pixel from the
end of first pipe to accurately display colours. Hardware was programmed
properly to account for this extra pixel but it was not calculated
properly in software causing a split screen on some monitors.
[HOW]
The fix adjusts the second pipe's viewport and timings if the pixel
encoding is YCbCr422 or YCbCr420.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Peterson Guo <peterson.guo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Cacheline size is not available in IP discovery for gc943,gc944.
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Add MEC version from which alternate support for no PCIe atomics
is provided so that device is not skipped during KFD device init in
GFX1200/GFX1201.
Signed-off-by: Sreekant Somasekharan <sreekant.somasekharan@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
commit 38077562e059 ("drm/amd/display: Implement new
backlight_level_params structure") adjusted DC core to require
the backlight type to be programmed in the dc link when changing
brightness. This isn't initialized in amdgpu_dm for OLED panels
though which broke brightness.
Explicitly initialize when aux support is enabled.
Reported-and-tested-by: Luke Jones <luke@ljones.dev>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3792
Fixes: 38077562e059 ("drm/amd/display: Implement new backlight_level_params structure")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20241128032200.2085398-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
An HP Pavilion Aero Laptop 13-be0xxx/8916 has an ACPI EDID, but using
it is causing corruption. It's got illogical values of not specifying
a digital interface. Sanity check the ACPI EDID to avoid tripping such
problems.
Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3782
Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20241128032500.2088288-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
On VCN 1.0, VCN and JPEG use the same worker thread so cancel
the vcn worker rather than jpeg. On VCN 2.0 and newer
there are separate workers for each.
Fixes: 93df74873703 ("drm/amdgpu/jpeg: cancel the jpeg worker")
Tested-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix all typos in xe_vm_doc.h as reported by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-xe@lists.freedesktop.org
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128035901.375399-1-rdunlap@infradead.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix missing initial value for last_value.
For GuC capture register definition, it is required to define 64bit
register in a pair of 2 consecutive 32bit register entries, low first,
then hi. Add code to check this order.
Changes from prior revs:
v5:- Correct cross-line comment format
v4:- Fix warn on condition and remove skipping
v3:- Move break inside brace
v2:- Correct the fix tag pointed commit
Add examples in comments for warning
Add 1 missing hi condition check
Fixes: ecb633646391 ("drm/xe/guc: Plumb GuC-capture into dev coredump")
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241126201052.1937079-1-zhanjun.dong@intel.com
|
|
Log throttle register MMIO reads which will be useful for debugging.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129074300.1304068-1-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
A backmerge to get the PMT preparation work for
merging the BMG PMT support.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
dig_port->saved_port_bits is used to permanently store two DDI_BUF_CTL
bits, DDI_BUF_PORT_REVERSAL and DDI_A_4_LANES. Store them separately as
bools to make their use more logical and less about storing state as
register bits.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129102503.452272-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The supported resolutions were misrepresented in earlier versions of
hardware manuals.
Fixes: 768e9e61b3b9 ("drm: renesas: Add RZ/G2L DU Support")
Cc: stable@vger.kernel.org
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Tested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241120150328.4131525-1-chris.brandt@renesas.com
|
|
Kickstart 6.14 cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Going forward, struct intel_display is the main device data structure
for display. Convert the power map code to it.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9df6b67914cd5afe7107c8431e8c475794b62298.1732808222.git.jani.nikula@intel.com
|
|
Going forward, struct intel_display is the main device data structure
for display. Convert the high level interfaces (init, cleanup, suspend,
resume, etc.) of intel_display_power.c over to it. The actual power
get/put etc. are left for follow-up.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e1761b0fe5081bf6ca21cca3430befe254f61b32.1732808222.git.jani.nikula@intel.com
|
|
Going forward, struct intel_display is the main device data structure
for display. Convert intel_display_power.c internally first, leaving
external interfaces for follow-up.
v2: Rebase, checkpatch fixes
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d3284b30b53dd2fec786775ccb8992939360d774.1732808222.git.jani.nikula@intel.com
|
|
Going forward, struct intel_display is the main device data structure
for display. Switch the power well code over to it.
v2: Fix parenthesis alignment
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b8c0ff5502a5df55ec7a160d90257c6f2befc0b6.1732808222.git.jani.nikula@intel.com
|
|
Start converting display power domain code to struct
intel_display. Start off with for_each_power_domain_well() and the
reverse variant.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d21752baef1cab52ac3bec4f4e1f09f9acd6c1bf.1732808222.git.jani.nikula@intel.com
|
|
Start converting power well code to struct intel_display. Start off with
for_each_power_well() and the reverse variant.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/30c3e44cdb9557a195b2e086bf169da8d8497c6b.1732808222.git.jani.nikula@intel.com
|
|
We don't need to shout out loud if there is a Link Integrity
Failure. This does not mean HDCP has failed, it is expected and
taken into account in the HDCP Spec. The real failure happens when
we are not able to reauthenticate and get HDCP running again for
which we already have the right logging.
--v2
-Remove the log altogether [Ankit]
--v3
-Remove useless display variable
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241202060410.1872121-1-suraj.kandpal@intel.com
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We currently are not calling display runtime suspend functions when
D3cold is not allowed. Because of that, we end up not disabling dynamic
DC states (and do not go to DC9). With dynamic DC states enabled, we
will also have DMC wakelock enabled. Since we use a delayed work to
release the DMC wakelock, the work might get executed a little too late
(after the PCI device has been put to D3hot) and we get a timeout
warning ("DMC wakelock release timed out") because the MMIO for
releasing the wakelock will be invalid after that point.
To fix that, make sure we flush the release work at the end of
xe_display_pm_runtime_suspend_late(). We can do that unconditionally
because, if there is no pending work, that turns into a no-op.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129164010.29887-4-gustavo.sousa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The current behavior for the runtime suspend case is that
xe_display_pm_suspend_late() is only called when D3cold is allowed.
Let's incorporate that behavior into a function specific to runtime PM
and call it xe_display_pm_runtime_suspend_late().
With that, we keep stuff a bit more self-contained and allow having a
place for adding more "late display runtime suspend"-related logic that
isn't dependent on the "D3cold allowed" state.
v2:
- Fix typo in that caused xe_display_pm_runtime_suspend_late() to call
itself instead of xe_display_pm_suspend_late().
- Add the empty version of xe_display_pm_runtime_suspend_late() for
the !CONFIG_DRM_XE_DISPLAY case.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129164010.29887-3-gustavo.sousa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We will need to flush the release work from outside in an upcoming
change. Let's put that into a public interface and call it
intel_dmc_wl_flush_release_work().
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129164010.29887-2-gustavo.sousa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Pull drm fixes from Dave Airlie:
"Merge window fixes, mostly amdgpu and xe, with a few other minor ones,
all looks fairly normal,
i915:
- hdcp: Fix when the first read and write are retried
xe:
- Wake up waiters after wait condition set to true
- Mark the preempt fence workqueue as reclaim
- Update xe2 graphics name string
- Fix a couple of guc submit races
- Fix pat index usage in migrate
- Ensure non-cached migrate pagetable bo mappings
- Take a PM ref in the delayed snapshot capture worker
amdgpu:
- SMU 13.0.6 fixes
- XGMI fixes
- SMU 13.0.7 fixes
- Misc code cleanups
- Plane refcount fixes
- DCN 4.0.1 fixes
- DC power fixes
- DTO fixes
- NBIO 7.11 fixes
- SMU 14.0.x fixes
- Reset fixes
- Enable DC on LoongArch
- Sysfs hotplug warning fix
- Misc small fixes
- VCN 4.0.3 fix
- Slab usage fix
- Jpeg delayed work fix
amdkfd:
- wptr handling fixes
radeon:
- Use ttm_bo_move_null()
- Constify struct pci_device_id
- Fix spurious hotplug
- HPD fix
rockchip
- fix 32-bit build"
* tag 'drm-next-2024-11-29' of https://gitlab.freedesktop.org/drm/kernel: (48 commits)
drm/xe: Take PM ref in delayed snapshot capture worker
drm/xe/migrate: use XE_BO_FLAG_PAGETABLE
drm/xe/migrate: fix pat index usage
drm/xe/guc_submit: fix race around suspend_pending
drm/xe/guc_submit: fix race around pending_disable
drm/xe: Update xe2_graphics name string
drm/rockchip: avoid 64-bit division
Revert "drm/radeon: Delay Connector detecting when HPD singals is unstable"
drm/amdgpu/jpeg: cancel the jpeg worker
drm/amdgpu: fix usage slab after free
drm/amdgpu/vcn: reset fw_shared when VCPU buffers corrupted on vcn v4.0.3
drm/amdgpu: Fix sysfs warning when hotplugging
drm/amdgpu: Add sysfs interface for vcn reset mask
drm/amdgpu/gmc7: fix wait_for_idle callers
drm/amd/pm: Remove arcturus min power limit
drm/amd/pm: skip setting the power source on smu v14.0.2/3
drm/amd/pm: disable pcie speed switching on Intel platform for smu v14.0.2/3
drm/amdkfd: Use the correct wptr size
drm/xe: Mark preempt fence workqueue as reclaim
drm/xe/ufence: Wake up waiters after setting ufence->signalled
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the two simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups
that can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog"
* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Fix a potential abuse of seq_printf() format string in drivers
cpu: Remove spurious NULL in attribute_group definition
s390/con3215: Remove spurious NULL in attribute_group definition
perf: arm-ni: Remove spurious NULL in attribute_group definition
driver core: Constify bin_attribute definitions
sysfs: attribute_group: allow registration of const bin_attribute
firmware_loader: Fix possible resource leak in fw_log_firmware_info()
drivers: core: fw_devlink: Fix excess parameter description in docstring
driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
cacheinfo: Use of_property_present() for non-boolean properties
cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
drivers: core: fw_devlink: Make the error message a bit more useful
phy: tegra: xusb: Set fwnode for xusb port devices
drm: display: Set fwnode for aux bus devices
driver core: fw_devlink: Stop trying to optimize cycle detection logic
driver core: Constify attribute arguments of binary attributes
sysfs: bin_attribute: add const read/write callback variants
sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
sysfs: treewide: constify attribute callback of bin_attribute::llseek()
sysfs: treewide: constify attribute callback of bin_attribute::mmap()
...
|
|
Hand rolling the buffer overflow handling with snprintf() is a bit
tedious. The seq_buf interface is made for this. Switch to it.
Use struct intel_display while at it.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127131838.3268735-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
There exists x86-based hardware with HiSilicon BMC chipsets. This
driver works well on these systems. Drop the dependency on ARM64.
Tested on RH1288 V3.
v2:
- s/Aarch86/ARM64 (Sui)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127133732.470414-1-tzimmermann@suse.de
|