| Age | Commit message (Collapse) | Author |
|---|
|
[Why & How]
Have to support multiple CRC windows setting to dmub. Add new dmub forward
functions for supporting/forwarding multiple crc windows setting to dmub.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For DP HBlank expansion/reduction, the HBlank parameters of the original
EDID timing needs to be notified to the sink in order for the timing to
be reduced back to the original HBlank size.
[How]
Add parameter in dc_crtc_timing to track the increased HBlank.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Some features, such as HBlank expansion/reduction, needs to know how
much HBlank is required to support basic audio.
[How]
Add interface to link to calculate required HBlank size for a given
link + timing combination to support basic audio (i.e. 2-channel 48KHz).
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DPCD register RECEIVE_PORT0_CAP contains HBlank expansion/reduction
capabilities of a DP device. These capabilities are required to enable
HBlank expansion/reduction logic.
[How]
Read raw RECEIVE_PORT0_CAP register values and store parsed fields.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
- Remove legacy update clocks sequence
- FCLK P-State allow message is not required
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
Driver disable will deallocate framebuffer to reset IPS state, this will cause IPS start with
INIT state to blindly power gate ONO region to break power sequence. All the gating blocks
should be powered up when releasing hw to ensure all the power optimizations are identical to pre-OS.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
No check for HUBP/DPP power gating when DSC instance is still running. Avoid HUBP/DPP to
power gate when corresponding DSC block is still running in the power gating calculation.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Initialize the process context address before setting the shader debugger.
[ 260.781212] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0)
[ 260.781236] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10
[ 260.781255] amdgpu 0000:03:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00040A40
[ 260.781270] amdgpu 0000:03:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5)
[ 260.781284] amdgpu 0000:03:00.0: amdgpu: MORE_FAULTS: 0x0
[ 260.781296] amdgpu 0000:03:00.0: amdgpu: WALKER_ERROR: 0x0
[ 260.781308] amdgpu 0000:03:00.0: amdgpu: PERMISSION_FAULTS: 0x4
[ 260.781320] amdgpu 0000:03:00.0: amdgpu: MAPPING_ERROR: 0x0
[ 260.781332] amdgpu 0000:03:00.0: amdgpu: RW: 0x1
[ 260.782017] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0)
[ 260.782039] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10
[ 260.782058] amdgpu 0000:03:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00040A41
[ 260.782073] amdgpu 0000:03:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5)
[ 260.782087] amdgpu 0000:03:00.0: amdgpu: MORE_FAULTS: 0x1
[ 260.782098] amdgpu 0000:03:00.0: amdgpu: WALKER_ERROR: 0x0
[ 260.782110] amdgpu 0000:03:00.0: amdgpu: PERMISSION_FAULTS: 0x4
[ 260.782122] amdgpu 0000:03:00.0: amdgpu: MAPPING_ERROR: 0x0
[ 260.782137] amdgpu 0000:03:00.0: amdgpu: RW: 0x1
[ 260.782155] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0)
[ 260.782166] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10
Fixes: 438b39ac74e2 ("drm/amdkfd: pause autosuspend when creating pdd")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3849
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Uprev IGT to the latest version and update expectation files.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217160655.2371138-1-vignesh.raman@collabora.com
|
|
Drivers will need to register dmem regions at probe time, so let's
give them a drm-managed helper.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20241204134410.1161769-3-dev@lankhorst.se
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The HDMI on RK3576 shares the same IP block (PHY and Controller)
with rk3588.
However, there are some control bits scattered in different GRF.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241231094425.253398-4-andyshrk@163.com
|
|
There are some control bits for IO and interrupts status scattered
across different GRF on differt SOC.
Add platform callback for this IO setting and interrupts status
handling.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241231094425.253398-2-andyshrk@163.com
|
|
Fix two kernel doc warnings introduced by the recent DP audio patch:
- Add a doc line for the new "audio" field
- Remove a reference to zynqmp_dpsub.c from zynqmp.rst, as the .c file
no longer has structured comments
Fixes: 3ec5c1579305 ("drm: xlnx: zynqmp_dpsub: Add DP audio support")
Closes: https://lore.kernel.org/all/20241220154208.720d990b@canb.auug.org.au/
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220-xilinx-dp-audio-doc-fix-v1-1-cc488996e463@ideasonboard.com
|
|
Delete one line break to make the format correct, resolving the
following warning during a W=1 build:
>> drivers/gpu/drm/tests/drm_kunit_helpers.c:324: warning: bad line: for a KUnit test
Fixes: caa714f86699 ("drm/tests: helpers: Add helper for drm_display_mode_from_cea_vic()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501032001.O6WY1VCW-lkp@intel.com/
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Tested-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250104165134.1695864-1-eleanor15x@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
A small optimization and cleanup for mtl_port_buf_ctl_program function
which lets use intel_de_rmw instead of a intel_de_read and
intel_de_write.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103051705.145161-3-suraj.kandpal@intel.com
|
|
Use intel display instead of drm_i915_private in
mtl_ddi_prepare_link_retrain & mtl_port_buf_ctl_program
functions.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103051705.145161-2-suraj.kandpal@intel.com
|
|
This reverts commit 483f7d94a0453564ad9295288c0242136c5f36a0.
This needs to be reverted since HDCP even after updating the connector
state HDCP property we don't reenable HDCP until the next commit
in which the CP Property is set causing compliance to fail.
--v2
-Fix build issue [Dnyaneshwar]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103084517.239998-1-suraj.kandpal@intel.com
|
|
This is the only afbc format supported by the upcoming
VOP for rk3576.
Add support for it.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net> # on RK3568
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241231090802.251787-2-andyshrk@163.com
|
|
The struct device_node *next pointer is not initialized, and it is
used in an error path in which it may have never been modified by
function mtk_drm_of_get_ddp_ep_cid().
Since the error path is relying on that pointer being NULL for the
OVL Adaptor and/or invalid component check and since said pointer
is being used in prints for %pOF, in the case that it points to a
bogus address, the print may cause a KP.
To resolve that, initialize the *next pointer to NULL before usage.
Fixes: 4c932840db1d ("drm/mediatek: Implement OF graphs support for display paths")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/633f3c6d-d09f-447c-95f1-dfb4114c50e6@stanley.mountain/
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241112105030.93337-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Check the return value of drm_dp_dpcd_readb() to confirm that
AUX communication is successful. To simplify the code, replace
drm_dp_dpcd_readb() and DP_GET_SINK_COUNT() with drm_dp_read_sink_count().
Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Liankun Yang <liankun.yang@mediatek.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241218113448.2992-1-liankun.yang@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Use the helper function to update the connector's information. This
makes sure that HDMI-related events are handled in a generic way.
Currently it is limited to the HDMI state reporting to the sound system.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-10-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The vc4_hdmi_connector_detect_ctx() via vc4_hdmi_handle_hotplug()
already reads EDID and propagates it to the drm_connector. Stop
rereading EDID as a part of the .get_modes() callback and just update
the list of modes. This matches the behaviour of the i915 driver.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-9-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Drop driver-specific implementation and use the generic HDMI Codec
framework in order to implement the HDMI audio support.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-8-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Extend drm_bridge_connector code to read the EDID and use it to update
connector status if the bridge chain implements HDMI bridge. Performing
it from the generic location minimizes individual bridge's code and
enforces standard behaviour from all corresponding drivers.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-7-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The HDMI Connectors need to perform a variety of tasks when the HDMI
connector state changes. Such tasks include setting or invalidating CEC
address, notifying HDMI codec driver, updating scrambler data, etc.
Implementing such tasks in a driver-specific callbacks is error prone.
Start implementing the generic helper function (currently handling only
the HDMI Codec framework) to be used by drivers utilizing HDMI Connector
framework.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-6-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Make the Lontium LT9611 DSI-to-HDMI bridge driver use the DRM HDMI Codec
framework. This enables programming of Audio InfoFrames using the HDMI
Connector interface and also enables support for the missing features,
including the ELD retrieval and better hotplug support.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-5-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add necessary glue code to be able to use new HDMI codec framework from
the DRM bridge drivers. The drm_bridge implements a limited set of the
hdmi_codec_ops interface, with the functions accepting both
drm_connector and drm_bridge instead of just a generic void pointer.
This framework is integrated with the DRM HDMI Connector framework, but
can also be used for DisplayPort connectors.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-4-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Several DRM drivers implement HDMI codec support (despite its name it
applies to both HDMI and DisplayPort drivers). Implement generic
framework to be used by these drivers. This removes a requirement to
implement get_eld() callback and provides default implementation for
codec's plug handling.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-3-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The no_capture_mute flag might differ from platform to platform,
especially in the case of the wrapping implementations, like the
upcoming DRM HDMI Codec framework. Move the flag next to all other flags
in struct hdmi_codec_pdata.
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-2-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The upcoming DRM connector HDMI codec implementation is going to use
codec-specific data in the .get_dai_id to get drm_connector. Pass data
to the callback, as it is done with other hdmi_codec_ops callbacks.
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-1-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Avoid using "graphics tile" to refer to GT since it's ambiguous: it's
**part** of a tile and there's also "media gt". In several places it's
documented as "GT structure", so just follow it.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103001111.331684-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
If GuC fails to load, the driver wedges, but in the process it tries to
do stuff that may not be initialized yet. This moves the
xe_gt_tlb_invalidation_init() to be done earlier: as its own doc says,
it's a software-only initialization and should had been named with the
_early() suffix.
Move it to be called by xe_gt_init_early(), so the locks and seqno are
initialized, avoiding a NULL ptr deref when wedging:
xe 0000:03:00.0: [drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01
xe 0000:03:00.0: [drm] *ERROR* GT0: firmware signature verification failed
xe 0000:03:00.0: [drm] *ERROR* CRITICAL: Xe has declared device 0000:03:00.0 as wedged.
...
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 UID: 0 PID: 3908 Comm: modprobe Tainted: G U W 6.13.0-rc4-xe+ #3
Tainted: [U]=USER, [W]=WARN
Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DDR5 UDIMM CRB, BIOS ADLSFWI1.R00.3275.A00.2207010640 07/01/2022
RIP: 0010:xe_gt_tlb_invalidation_reset+0x75/0x110 [xe]
This can be easily triggered by poking the GuC binary to force a
signature failure. There will still be an extra message,
xe 0000:03:00.0: [drm] *ERROR* GT0: GuC mmio request 0x4100: no reply 0x4100
but that's better than a NULL ptr deref.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3956
Fixes: 7dbe8af13c18 ("drm/xe: Wedge the entire device")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103001111.331684-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
DisplayPort AUX protocol supports I2C transport which is capable of
reading EDID or supports MCCS.
In drm_dp_helper, drm_dp_i2c_xfer() packs I2C requests into a
sequence of AUX requests.
it6505_aux_i2c_operation() is implemented to match drm_dp_i2c_xfer()
operactions.
it6505_aux_i2c_transfer() adds I2C functionality
for it6505_aux_transfer().
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-10-e0fdd4844703@ite.corp-partner.google.com
|
|
HDCP must disabled encryption and restart authentication after
waiting KSV for 5s.
The original method uses a counter in a waitting loop that may
wait much longer than it is supposed to.
Use time_after() for KSV wait timeout.
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-9-e0fdd4844703@ite.corp-partner.google.com
|
|
When HDCP negotiation with a repeater device.
Checking SHA V' matching must retry 3 times before restarting HDCP.
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-8-e0fdd4844703@ite.corp-partner.google.com
|
|
When running the HDCP CTS test with UNIGRAF DPR-100.
KSV list must be read from DP_AUX_HDCP_KSV_FIFO in an AUX request,
and can not separate with multiple read requests.
The AUX operation command "CMD_AUX_GET_KSV_LIST" reads the KSV list
with AUX FIFO and is able to read DP_AUX_HDCP_KSV_FIFO in an AUX request.
Add it6505_get_ksvlist() which uses CMD_AUX_GET_KSV_LIST operation
to read the KSV list.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-7-e0fdd4844703@ite.corp-partner.google.com
|
|
When starting HDCP authentication, HDCP encryption should be enabled
when R0'is checked.
Change encryption enables time at R0' ready.
The hardware HDCP engine trigger is changed and the repeater KSV fails
will restart HDCP.
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-6-e0fdd4844703@ite.corp-partner.google.com
|
|
When HDCP is activated,
a DisplayPort source receiving CP_IRQ from the sink
shall check Bstatus from DPCD and process the corresponding value
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-5-e0fdd4844703@ite.corp-partner.google.com
|
|
A HDCP source device shall support max downstream to 127 devices.
Change definition MAX_HDCP_DOWN_STREAM_COUNT to 127
KSVs shall save for DRM blocked devices check.
This results in struct it6505 growth by ~0.5 KiB.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-4-e0fdd4844703@ite.corp-partner.google.com
|
|
HDCP KSV list readback can choose to use AUX FIFO or
general data register.
For some DisplayPort devices, the KSV list must be read
in 5 byte boundaries.
The original AUX read command does not support these devices.
The AUX command operation control register "REG_AUX_CMD_REQ" uses b[3:0]
as AUX operacion control, and b[7:4] are status bits and read only.
To change KSV read operation uses "CMD_AUX_NATIVE_READ" from using
the data registers to using AUX FIFO.
The extended command "CMD_AUX_GET_KSV_LIST" is added as
"CMD_AUX_NATIVE_READ" with the 0x10 flag which selects AUX FIFO mode.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-3-e0fdd4844703@ite.corp-partner.google.com
|
|
The original AUX operation using data registers is limited to 4 bytes.
The AUX operation command CMD_AUX_I2C_EDID_READ uses AUX FIFO and
is capable of reading 16 bytes.
This improves the speed of EDID read.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-2-e0fdd4844703@ite.corp-partner.google.com
|
|
The hardware AUX FIFO is 16 bytes
Change definition of AUX_FIFO_MAX_SIZE to 16
Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-1-e0fdd4844703@ite.corp-partner.google.com
|
|
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104190636.274926-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Debugging incorrect UAPI usage tends to be a bit painful, so add a
helper macro to make it easier to add debug logging which can be enabled
at runtime via drm.debug.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/630578/
|
|
The call chain on a5xx_gpu_init is such that pdev is not going to be
null, so the null check on pdev can be removed. This also cleans up
a static analysis warning where pdev is dereferenced before the null
check which cannot actually occur.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/624180/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The "submit->cmd[i].size" and "submit->cmd[i].offset" variables are u32
values that come from the user via the submit_lookup_cmds() function.
This addition could lead to an integer wrapping bug so use size_add()
to prevent that.
Fixes: 198725337ef1 ("drm/msm: fix cmdstream size check")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/624696/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
This adds MSM_PARAM_UCHE_TRAP_BASE that will be used by Mesa
implementation for VK_KHR_shader_clock and GL_ARB_shader_clock.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Patchwork: https://patchwork.freedesktop.org/patch/627036/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Now all the DDR bandwidth voting via the GPU Management Unit (GMU)
is in place, declare the Bus Control Modules (BCMs) and the
corresponding parameters in the GPU info struct.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629401/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The Adreno GPU Management Unit (GMU) can also scale the DDR Bandwidth
along the Frequency and Power Domain level, until now we left the OPP
core scale the OPP bandwidth via the interconnect path.
In order to enable bandwidth voting via the GPU Management
Unit (GMU), when an opp is set by devfreq we also look for
the corresponding bandwidth index in the previously generated
bw_table and pass this value along the frequency index to the GMU.
The GMU also takes another vote called AB which is a 16bit quantized
value of the floor bandwidth against the maximum supported bandwidth.
The AB is calculated with a default 25% of the bandwidth like the
downstream implementation too inform the GMU firmware the minimal
quantity of bandwidth we require for this OPP. Only pass the AB
vote starting from A750 GPUs.
Since we now vote for all resources via the GMU, setting the OPP
is no more needed, so we can completely skip calling
dev_pm_opp_set_opp() in this situation.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/629397/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The Adreno GPU Management Unit (GMU) can also scale the ddr
bandwidth along the frequency and power domain level, but for
now we statically fill the bw_table with values from the
downstream driver.
Only the first entry is used, which is a disable vote, so we
currently rely on scaling via the linux interconnect paths.
Let's dynamically generate the bw_table with the vote values
previously calculated from the OPPs.
Those entries will then be used by the GMU when passing the
appropriate bandwidth level while voting for a gpu frequency.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/629396/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
