summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2025-12-08drm/amd/display: refactor HPD to increase flexibilityDmytro Laktyushkin
Currently all dcn revisions have to follow the same codepath for hotplug detection. This change allows per dcn hpd handling consolidating hpd code in link_encoder. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Use local variable for analog_engine initializationIvan Lipski
[Why&How] Use local variable for analog_engine retrieval and check if it is supported instead of the struct parameter. Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Remove unused encoder typesIvan Lipski
[Why&How] We only support ENCODER_ID_INTERNAL_UNIPHY encoders now, so NUTMEG & TRAVIS can be removed from translate_encoder_to_transmitter. Also refactor to use local variables of transmitter to exit early. V2: Fix construct_phy check for TRANSMITTER_UKNOWN Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Promote DC to 3.2.360Taimur Hassan
This version brings along the following updates: - Add additional checks for PSP footer size - Correct DSC padding accounting - Check ATOM_DEVICE_CRT2_SUPPORT in dc_load_detection - Drop FPU flags from dml21_wrapper.c - Permit DC_FP_START/END only in non-FP compilation units - Add cursor offload abort to the new HWSS path - Move dml2_create and init to the non-FPU dml2_wrapper - Move dml2_validate to the non-FPU dml2_wrapper - Rename dml2_wrapper.c to dml2_wrapper_fpu.c - Increase EDID read retries - Correct comment style - Move CONNECTOR_ID_PCIE into switch/case - Drop needless check for link->link_id.id - Improve readability of link_detect_sink_signal_type - Don't change brightness for disabled connectors - Write default Vesa Aux backlight control in dmub - Refactor panel replay dc libs - Revise VSC SDP header for Panel Replay - Fix sending redundant enable command to dmub - Parse debug flag to PR FW - Add AS-SDP v2 support for eDP feature - Refactor panel replay set dmub cmd flow - Improve HDMI info retrieval - Check NULL before accessing Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: [FW Promotion] Release 0.1.37.0Taimur Hassan
Add a new disallow_time_us state and a new legacy_method_no_fams2 flag to fam2. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Add additional checks for PSP footer sizeOvidiu Bunea
[WHY & HOW] Newer ASICs have different PSP footer sizes which lead to driver failing to locate the DMCUB FW meta info, which in turn causes improper DMCUB FW loading and causes DMCUB to crash. Add support for custom PSP footer sizes and check 512B by default as well. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Correct DSC padding accountingRelja Vojvodic
[WHY] - After the addition of all OVT patches, DSC padding was being accounted for multiple times, effectively doubling the padding - This caused compliance failures or corruption [HOW] - Add padding to DSC pic width when required by HW, and do not re-add when calculating reg values - Do not add padding when computing PPS values, and instead track padding separately to add when calculating slice width values Reviewed-by: Chris Park <chris.park@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Relja Vojvodic <rvojvodi@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Permit DC_FP_START/END only in non-FP compilation unitsArd Biesheuvel
[WHAT] Test the existing CPP macro _LINUX_FPU_COMPILATION_UNIT, which is set when building source files that are permitted to use floating point, in the implementation of DC_FP_START/END so that those are only usable in non-FP code. This is a requirement of the generic kernel mode FPU API, as some architectures (i.e., arm64) cannot safely enable FP codegen in arbitrary code. Cc: Austin Zheng <austin.zheng@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <siqueira@igalia.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Suggested-by: Christian König <christian.koenig@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Drop FPU flags from dml21_wrapper.cHarry Wentland
[WHAT] The existing CFLAGS_ lines were pointing to a wrong location for dml21_wrapper.c and were thereby ineffective. This means dml21_wrapper.c is not an FPU compilation unit. Remove the (erroneous) CFLAGS_ entries. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Move dml2_create and init to the non-FPU dml2_wrapperHarry Wentland
[WHAT] dml2_init calls DC_FP_START/END and needs to be moved out of the FPU compilation unit. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Move dml2_validate to the non-FPU dml2_wrapperHarry Wentland
[WHAT] It calls DC_FP_START/END and shouldn't be living inside an FPU compilation unit. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Rename dml2_wrapper.c to dml2_wrapper_fpu.cHarry Wentland
[WHAT] This function is an FPU compilation unit. Therefore it's not allowed to call DC_FP_START/END functions. It currently does so and we'll need to move those functions out. Therefore rename the existing compilation unit so we can introduce a non-FPU dml2_wrapper.c. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Correct comment styleMario Limonciello (AMD)
[WHAT] Comments should have /* and */ on their own lines. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Drop needless check for link->link_id.idMario Limonciello (AMD)
[WHY] The switch/case in `link_detect_sink_signal_type` already detects the link ID of `CONNECTOR_ID_HDMI_TYPE_A`. [How] Drop the extra match. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Move CONNECTOR_ID_PCIE into switch/caseMario Limonciello (AMD)
[WHY] There is already a switch/case looking at link->link_id.id. [How] Move the case of `CONNECTOR_ID_PCIE` into switch case. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Improve readability of link_detect_sink_signal_typeMario Limonciello (AMD)
[WHAT] Move the break statements indentation in for the switch/case block. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Write default Vesa Aux backlight control in dmubDerek Lai
[WHY] Some OLED panels require driver to write Aux BL before link training or turning on backlight; otherwise monitor brightness will change. [HOW] Write the default Vesa Aux backlight control in dmub. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Derek Lai <Derek.Lai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Refactor panel replay dc libsJack Chang
[WHY] Add dc interface to export link service libs for setting PR dmub command. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Revise VSC SDP header for Panel ReplayJack Chang
[WAHT] Add vsc sdp header setting for Panel Replay. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Fix sending redundant enable command to dmubJack Chang
[WHY & HOW] Fix sending repeating PR enable/disable command to dmub which causing performance problem Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Parse debug flag to PR FWJack Chang
[HOW & WHY] Parse debug flag to PR FW. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Add AS-SDP v2 support for eDP featureJack Chang
[WHY & HOW] VESA Panel Replay requires AS-SDP v2 support. Need to add checking flow to enable AS-SDP v2 in this case. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Refactor panel replay set dmub cmd flowJack Chang
[WHY] Add link service interface for setting PR dmub command Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: Improve HDMI info retrievalIvan Lipski
[WHY & HOW] Make a dedicated function to read HDMI-related monitor info, including monitor's SCDC support. Suggested-by: Fangzhi Zuo <jerry.zuo@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-03Merge tag 'amd-drm-next-6.19-2025-12-02' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.19-2025-12-02: amdgpu: - Unified MES fix - SMU 11 unbalanced irq fix - Fix for driver reloading on APUs - pp_table sysfs fix - Fix memory leak in fence handling - HDMI fix - DC cursor fixes - eDP panel parsing fix - Brightness fix - DC analog fixes - EDID retry fixes - UserQ fixes - RAS fixes - IP discovery fix - Add missing locking in amdgpu_ttm_access_memory_sdma() - Smart Power OLED fix - PRT and page fault fixes for GC 6-8 - VMID reservation fix - ACP platform device fix - Add missing vm fault handling for GC 11-12 - VPE fix amdkfd: - Partitioning fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patch.msgid.link/20251202220101.2039347-1-alexander.deucher@amd.com
2025-12-02drm/amd/display: fix typo in display_mode_core_structs.hAditya Gollamudi
Fix a typo in a comment, change "enviroment" to "environment" in drivers/gpu/drm/amd/display/dc/dml2/display_mode_core_structs.h Fixes: e6a8a000cfe6 ("drm/amd/display: Rename dml2 to dml2_0 folder") Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aditya Gollamudi <adigollamudi@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-02drm/amd/display: fix Smart Power OLED not working after S4Ian Chen
[HOW] Before enable smart power OLED, we need to call set pipe to let DMUB get correct ABM config. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-02drm/amd/display: Move RGB-type check for audio sync to DCE HW sequenceIvan Lipski
[Why&How] DVI-A & VGA connectors are applicable to DCE ASICs, so move them to dce110_hwseq.c to block audio sync on SIGNAL_TYPE_RGB for DCE ASICs. Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-02Merge tag 'drm-misc-next-2025-12-01-1' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next Extra drm-misc-next for v6.19-rc1: UAPI Changes: - Add support for drm colorop pipeline. - Add COLOR PIPELINE plane property. - Add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE. Cross-subsystem Changes: - Attempt to use higher order mappings in system heap allocator. - Always taint kernel with sw-sync. Core Changes: - Small fixes to drm/gem. - Support emergency restore to drm-client. - Allocate and release fb_info in single place. - Rework ttm pipelined eviction fence handling. Driver Changes: - Support the drm color pipeline in vkms, amdgfx. - Add NVJPG driver for tegra. - Assorted small fixes and updates to rockchip, bridge/dw-hdmi-qp, panthor. - Add ASL CS5263 DP-to-HDMI simple bridge. - Add and improve support for G LD070WX3-SL01 MIPI DSI, Samsung LTL106AL0, Samsung LTL106AL01, Raystar RFF500F-AWH-DNN, Winstar WF70A8SYJHLNGA, Wanchanglong w552946aaa, Samsung SOFEF00, Lenovo X13s panel. - Add support for it66122 to it66121. - Support mali-G1 gpu in panthor. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patch.msgid.link/aa5cbd50-7676-4a59-bbed-e8428af86804@linux.intel.com
2025-11-26drm/amd/display: Enable support for Gamma 2.2Alex Hung
This patchset enables support for the Gamma 2.2. With this patch the following IGT subtests pass: kms_colorop --run plane-XR30-XR30-gamma_2_2 kms_colorop --run plane-XR30-XR30-gamma_2_2_inv-gamma_2_2 kms_colorop --run plane-XR30-XR30-gamma_2_2_inv-gamma_2_2-gamma_2_2_inv Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-52-alex.hung@amd.com
2025-11-26drm/amd/display: Disable CRTC degamma when color pipeline is enabledAlex Hung
The degamma is to be handled by Color pipeline API. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-50-alex.hung@amd.com
2025-11-26drm/amd/display: Ensure 3D LUT for color pipelineAlex Hung
Check dpp.hw_3d_lut before creating shaper tf/lut and 3dlut colorops in colorpipeline and handling these colorops. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-49-alex.hung@amd.com
2025-11-26drm/amd/display: Add AMD color pipeline docHarry Wentland
Add kernel doc for AMD color pipeline. Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-48-alex.hung@amd.com
2025-11-26drm/amd/display: add 3D LUT coloropAlex Hung
This adds support for a 3D LUT. The color pipeline now consists of the following colorops: 1. 1D curve colorop 2. Multiplier 3. 3x4 CTM 4. 1D curve colorop 5. 1D LUT 6. 3D LUT 7. 1D curve colorop 8. 1D LUT Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-47-alex.hung@amd.com
2025-11-26drm/colorop: allow non-bypass coloropsHarry Wentland
Not all HW will be able to do bypass on all color operations. Introduce an 32 bits 'flags' for all colorop init functions and DRM_COLOROP_FLAG_ALLOW_BYPASS for creating the BYPASS property when it's true. Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Simon Ser <contact@emersion.fr> Reviewed-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-45-alex.hung@amd.com
2025-11-26drm/colorop: Define LUT_1D interpolationHarry Wentland
We want to make sure userspace is aware of the 1D LUT interpolation. While linear interpolation is common it might not be supported on all HW. Give driver implementers a way to specify their interpolation. Reviewed-by: Simon Ser <contact@emersion.fr> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-44-alex.hung@amd.com
2025-11-26drm/amd/display: Swap matrix and multiplierAlex Hung
Swap the order of matrix and multiplier as designed in hardware. Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-43-alex.hung@amd.com
2025-11-26drm/amd/display: add multiplier coloropAlex Hung
This adds support for a multiplier. This multiplier is programmed via the HDR Multiplier in DCN. With this change the following IGT tests pass: kms_colorop --run plane-XR30-XR30-multiply_125 kms_colorop --run plane-XR30-XR30-multiply_inv_125 The color pipeline now consists of the following colorops: 1. 1D curve colorop 2. 3x4 CTM 3. Multiplier 4. 1D curve colorop 5. 1D LUT 6. 1D curve colorop 7. 1D LUT Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-42-alex.hung@amd.com
2025-11-26drm/amd/display: add 3x4 matrix coloropAlex Hung
This adds support for a 3x4 color transformation matrix. With this change the following IGT tests pass: kms_colorop --run plane-XR30-XR30-ctm_3x4_50_desat kms_colorop --run plane-XR30-XR30-ctm_3x4_overdrive kms_colorop --run plane-XR30-XR30-ctm_3x4_oversaturate kms_colorop --run plane-XR30-XR30-ctm_3x4_bt709_enc kms_colorop --run plane-XR30-XR30-ctm_3x4_bt709_dec The color pipeline now consists of the following colorops: 1. 1D curve colorop 2. 3x4 CTM 3. 1D curve colorop 4. 1D LUT 5. 1D curve colorop 6. 1D LUT Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-40-alex.hung@amd.com
2025-11-26drm/amd/display: add shaper and blend colorops for 1D Curve Custom LUTAlex Hung
This patch adds colorops for custom 1D LUTs in the SHAPER and BLND HW blocks. With this change the following IGT tests pass: kms_colorop --run plane-XR30-XR30-srgb_inv_eotf_lut kms_colorop --run plane-XR30-XR30-srgb_inv_eotf_lut-srgb_eotf_lut The color pipeline now consists of the following colorops: 1. 1D curve colorop 2. 1D curve colorop 3. 1D LUT 4. 1D curve colorop 5. 1D LUT The 1D curve colorops support sRGB, BT2020, and PQ scaled to 125.0. Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-39-alex.hung@amd.com
2025-11-26drm/amd/display: Add support for BT.709 and BT.2020 TFsHarry Wentland
This adds support for the BT.709/BT.2020 transfer functions on all current 1D curve plane colorops, i.e., on DEGAM, SHAPER, and BLND blocks. With this change the following IGT subtests pass: kms_colorop --run plane-XR30-XR30-bt2020_inv_oetf kms_colorop --run plane-XR30-XR30-bt2020_oetf Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-35-alex.hung@amd.com
2025-11-26drm/amd/display: Enable support for PQ 125 EOTF and InverseHarry Wentland
This patchset enables support for the PQ_125 EOTF and its inverse on all existing plane 1D curve colorops, i.e., on DEGAM, SHAPER, and BLND blocks. With this patchset the following IGT subtests are passing: kms_colorop --run plane-XR30-XR30-pq_125_eotf kms_colorop --run plane-XR30-XR30-pq_125_inv_eotf kms_colorop --run plane-XR30-XR30-pq_125_eotf-pq_125_inv_eotf kms_colorop --run plane-XR30-XR30-pq_125_eotf-pq_125_inv_eotf-pq_125_eotf Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-33-alex.hung@amd.com
2025-11-26drm/amd/display: Add support for sRGB EOTF in BLND blockAlex Hung
Expose a 3rd 1D curve colorop, with support for DRM_COLOROP_1D_CURVE_SRGB_EOTF and program the BLND block to perform the sRGB transform when the colorop is not in bypass With this change the following IGT test passes: kms_colorop --run plane-XR30-XR30-srgb_eotf-srgb_inv_eotf-srgb_eotf The color pipeline now consists of the following colorops: 1. 1D curve colorop w/ sRGB EOTF support 2. 1D curve colorop w/ sRGB Inverse EOTF support 3. 1D curve colorop w/ sRGB EOTF support Signed-off-by: Alex Hung <alex.hung@amd.com> Co-developed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-31-alex.hung@amd.com
2025-11-26drm/amd/display: Add support for sRGB Inverse EOTF in SHAPER blockAlex Hung
Expose a 2nd curve colorop with support for DRM_COLOROP_1D_CURVE_SRGB_INV_EOTF and program HW to perform the sRGB Inverse EOTF on the shaper block when the colorop is not in bypass. With this change the follow IGT tests pass: kms_colorop --run plane-XR30-XR30-srgb_inv_eotf kms_colorop --run plane-XR30-XR30-srgb_eotf-srgb_inv_eotf The color pipeline now consists of the following colorops: 1. 1D curve colorop w/ sRGB EOTF support 2. 1D curve colorop w/ sRGB Inverse EOTF support Signed-off-by: Alex Hung <alex.hung@amd.com> Co-developed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-30-alex.hung@amd.com
2025-11-26drm/amd/display: Add support for sRGB EOTF in DEGAM blockAlex Hung
Expose one 1D curve colorop with support for DRM_COLOROP_1D_CURVE_SRGB_EOTF and program HW to perform the sRGB transform when the colorop is not in bypass. With this change the following IGT test passes: kms_colorop --run plane-XR30-XR30-srgb_eotf The color pipeline now consists of a single colorop: 1. 1D curve colorop w/ sRGB EOTF Signed-off-by: Alex Hung <alex.hung@amd.com> Co-developed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-29-alex.hung@amd.com
2025-11-26drm/amd/display: Skip color pipeline initialization for cursor planeAlex Hung
cursor plane does not need to have color pipeline. Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-28-alex.hung@amd.com
2025-11-26drm/amd/display: Add bypass COLOR PIPELINEHarry Wentland
Add the default Bypass pipeline and ensure it passes the kms_colorop test plane-XR30-XR30-bypass. Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-27-alex.hung@amd.com
2025-11-26drm/amd/display: Ignore deprecated props when plane_color_pipeline setHarry Wentland
When the plane_color_pipeline bit is set we should ignore deprecated properties, such as COLOR_RANGE and COLOR_ENCODING. Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20251115000237.3561250-26-alex.hung@amd.com
2025-11-26drm/amd/display: Check ATOM_DEVICE_CRT2_SUPPORT in dc_load_detectionIvan Lipski
[WHY & HOW] Fix the typo of the else-if condition from ATOM_DEVICE_CRT1_SUPPORT to ATOM_DEVICE_CRT2_SUPPORT. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-11-26drm/amd/display: Add cursor offload abort to the new HWSS pathNicholas Kazlauskas
[HOW] If cursor attributes or position are passed into DC via a stream update and we take the newer HWSS paths then it's possible that the update races with cursor offloading if it's enabled. This can cause the cursor to remain on the screen if no further updates come in if it results in HW cursor support being disabled. [HOW] Add the abort into the HWSS path so that cursor offloading doesn't attempt to reprogram the cursor with outdated params. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2026-08-28 13:00:13 +0000