summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu
AgeCommit message (Collapse)Author
2023-01-17drm/amdgpu: Adjust ras support check condition for special asicYiPeng Chai
[Why]: Amdgpu ras uses amdgpu_ras_is_supported to check whether the ras block supports the ras function. amdgpu_ras_is_supported uses .ras_enabled to determine whether the ras function of the block is enabled. But for special asic with mem ecc enabled but sram ecc not enabled, some ras blocks support poison mode but their ras function is not enabled on .ras_enabled, these ras blocks will run abnormally. [How]: If the ras block is not supported on .ras_enabled but the asic supports poison mode and the ras block has ras configuration, it can be considered that the ras block supports ras function. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amdgpu: Remove unnecessary ras block support checkYiPeng Chai
[Why]: For special asic with mem ecc enabled but sram ecc not enabled, some ras blocks can register their ras configuration to ras list, but these ras blocks are not enabled on .ras_enabled, so it can not get ras block object using amdgpu_ras_get_ras_block. [How]: Remove ras block support check. Even if the ras block checked is not in the ras list, it will return a null pointer and will have no effect. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amdgpu: Perform gpu reset after gfx finishes processing ras poison ↵YiPeng Chai
consumption on gfx_v11_0_3 Perform gpu reset after gfx finishes processing ras poison consumption on gfx_v11_0_3. V2: Move gfx poison consumption handler from hw_ops to ip function level. V3: Adjust the calling position of amdgpu_gfx_poison_consumation_handler. V4: Since gfx v11_0_3 does not have .hw_ops instance, the .hw_ops null pointer check in amdgpu_ras_interrupt_poison_consumption_handler needs to be adjusted. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amdgpu: Add gfx cp ecc error irq handling on gfx v11_0_3YiPeng Chai
V2: Optimize gfx_v11_0_set_cp_ecc_error_state function. V3: Define macro constant for me pipe instance address interval. V5: Register and handle gfx cp ecc error irq on gfx v11_0_3. V6: Remove invalid intermediate function call. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amdgpu: Add gfx ras poison consumption irq handling on gfx v11_0_3YiPeng Chai
Add gfx ras poison consumption irq handling on gfx v11_0_3. V2: Move ras poison consumption irq handling code of gfx v11_0_3 to gfx_v11_0_3.c. V5: Create dedicated irq handler for RLC_GC_FED_INTERRUPT. V6: Remove invalid function call. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amdgpu: Add gfx ras function on gfx v11_0_3YiPeng Chai
Add gfx ras function on gfx v11_0_3. V2: 1. Add separate source files for gfx v11_0_3. 2. Create a common function to initialize gfx ras block. V3: 1. Rename amdgpu_gfx_ras_block_init to amdgpu_gfx_ras_sw_init. 2. Adjust the calling position of amdgpu_gfx_ras_sw_init. 3. Remove gfx_v11_0_3_ras_ops. V4: Revert changes in amdgpu_ras_interrupt_poison_consumption_handler. V5: 1. Remove invalid include file in gfx_v11_0_3.c. 2. Reduce the number of parameters of amdgpu_gfx_ras_sw_init. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd: Fix renoir/green sardine MP0 IP version detectionMario Limonciello
The existing codebase never had a case for detecting MP0 version on Renoir and instead relied upon hardcoded chip name. This was missed as part of the changes to migrate all IP blocks to build filenames from `amdgpu_ucode.c`. Consequently, Renoir tries to fetch a binary with 11_0_3 in the filename and since it's supposed to have "renoir" in the filename fails to probe. The fbdev still works though so the series worked. Add a case for Renoir into the legacy table to ensure the right ASD and TA firmware load again. Reported-by: Ekene Akuneme <Ekene.Akuneme@amd.com> Reported-by: Nicholas Choi <Nicholas.Choi@amd.com> Cc: Alex Hung <Alex.Hung@amd.com> Fixes: 994a97447e38 ("drm/amd: Parse both v1 and v2 TA microcode headers using same function") Fixes: 54a3e032340e ("drm/amd: Add a legacy mapping to "amdgpu_ucode_ip_version_decode"") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amdgpu: Add a missing tabDan Carpenter
This tab was deleted accidentally and triggers a Smatch warning: drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:1006 gfx_v8_0_init_microcode() warn: inconsistent indenting Add it back. Fixes: 0aaafb7359d2 ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX8") Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-16Merge tag 'drm-misc-next-2023-01-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.3: UAPI Changes: * fourcc: Document Open Source user waiver Cross-subsystem Changes: * firmware: fix color-format selection for system framebuffers Core Changes: * format-helper: Add conversion from XRGB8888 to various sysfb formats; Make XRGB8888 the only driver-emulated legacy format * fb-helper: Avoid blank consoles from selecting an incorrect color format * probe-helper: Enable/disable HPD on connectors plus driver updates * Use drm_dbg_ helpers in several places * docs: Document defaults for CRTC backgrounds; Document use of drm_minor Driver Changes: * arm/hdlcd: Use new debugfs helpers * gud: Use new debugfs helpers * panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert many drivers to common generic DSI write-sequence helper * v3d: Do not opencode drm_gem_object_lookup() * vc4: Various HVS an CRTC fixes * vkms: Fix SEGFAULT from incorrect GEM-buffer mapping * Convert various drivers to i2c probe_new() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
2023-01-16Merge tag 'amd-drm-next-6.3-2023-01-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.3-2023-01-13: amdgpu: - Fix possible segfault in failure case - Rework FW requests to happen in early_init for all IPs so that we don't lose the sbios console if FW is missing - PSR fixes - Misc cleanups - Unload fix - SMU13 fixes amdkfd: - Fix for cleared VRAM BOs - Fix cleanup if GPUVM creation fails - Memory accounting fix - Use resource_size rather than open codeing it - GC11 mGPU fix radeon: - Fix memory leak on shutdown Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230113225911.7776-1-alexander.deucher@amd.com
2023-01-16Merge tag 'amd-drm-next-6.3-2023-01-06' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.3-2023-01-06: amdgpu: - secure display support for multiple displays - DML optimizations - DCN 3.2 updates - PSR updates - DP 2.1 updates - SR-IOV RAS updates - VCN RAS support - SMU 13.x updates - Switch 1 element arrays to flexible arrays - Add RAS support for DF 4.3 - Stack size improvements - S0ix rework - Soft reset fix - Allow 0 as a vram limit on APUs - Display fixes - Misc code cleanups - Documentation fixes - Handle profiling modes for SMU13.x amdkfd: - Error handling fixes - PASID fixes radeon: - Switch 1 element arrays to flexible arrays drm: - Add DP adaptive sync DPCD definitions UAPI: - Add new INFO queries for peak and min sclk/mclk for profile modes on newer chips Proposed mesa patch: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/278 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230106222037.7870-1-alexander.deucher@amd.com
2023-01-13drm/amdgpu: Skip specific mmhub and sdma registers accessing under sriovYifan Zha
[Why] SDMA0_CNTL and MMHUB system aperture related registers are blocked by L1 Policy. Therefore, they cannot be accessed by VF and loged in violation. [How] For MMHUB registers, they will be programmed by PF. So VF will skip to program them in mmhubv3_0. For SDMA0_CNTL which is a PF_only register, VF don't need to program it in sdma_v6_0. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd: fix some dead code in `gfx_v9_0_init_cp_compute_microcode`Mario Limonciello
Some dead code was introduced as part of utilizing the `amdgpu_ucode_*` helpers. Adjust the control flow to make sure that firmware is released in the appropriate error flows. Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1530548 ("Control flow issues") Fixes: ec787deb2ddf ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX9") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amdgpu: Do not include <drm/drm_fb_helper.h>Thomas Zimmermann
Including <drm/drm_fb_helper.h> is not required, so remove the include statements. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-8-tzimmermann@suse.de
2023-01-13drm/amdgpu: Do not include <linux/fb.h>Thomas Zimmermann
Remove unnecessary include statements for <linux/fb.h>. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-5-tzimmermann@suse.de
2023-01-13drm: Include <linux/backlight.h> where neededThomas Zimmermann
Include <linux/backlight.h> in source files that need it. Some of DRM's source code gets the backlight header via drm_crtc_helper.h and <linux/fb.h>, which can leed to unnecessary recompilation. If possible, do not include drm_crtc_helper.h any longer. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Christian König <christian.koenig@amd.com> # amd Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-2-tzimmermann@suse.de
2023-01-13Merge tag 'amd-drm-fixes-6.2-2023-01-11' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.2-2023-01-11: amdgpu: - SMU13 fan speed fix - SMU13 fix power cap handling - SMU13 BACO fix - Fix a possible segfault in bo validation error case - Delay removal of firmware framebuffer - Fix error when unloading amdkfd: - SVM fix when clearing vram - GC11 fix for multi-GPU Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230112033004.8184-1-alexander.deucher@amd.com
2023-01-13Merge tag 'drm-misc-fixes-2023-01-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Several fixes for amdgpu (all addressing issues with fences), yet another orientation quirk for a Lenovo device, a use-after-free fix for virtio, a regression fix in TTM and a performance regression in drm buddy. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230112130954.pxt77g3a7rokha42@houat
2023-01-11drm/amdkfd: Page aligned memory reserve sizePhilip Yang
Use page aligned size to reserve memory usage because page aligned TTM BO size is used to unreserve memory usage, otherwise no page aligned size causes memory usage accounting unbalanced. Change vram_used definition type to int64_t to be able to trigger WARN_ONCE(adev && adev->kfd.vram_used < 0, "..."), to help debug the accounting issue with warning and backtrace. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-11drm/amdkfd: Cleanup vm process info if init vm failedPhilip Yang
If acquire_vm failed when initializing KFD vm, set vm->process_info to NULL and free process info, otherwise, the future acquire_vm will always fail as vm->process_info is not NULL. Pass avm as parameter to remove the duplicate code. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amdkfd: Fix NULL pointer error for GC 11.0.1 on mGPUEric Huang
The point bo->kfd_bo is NULL for queue's write pointer BO when creating queue on mGPU. To avoid using the pointer fixes the error. Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amdkfd: Fix NULL pointer error for GC 11.0.1 on mGPUEric Huang
The point bo->kfd_bo is NULL for queue's write pointer BO when creating queue on mGPU. To avoid using the pointer fixes the error. Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amdgpu: Fixed bug on error when unloading amdgpuYiPeng Chai
Fixed bug on error when unloading amdgpu. The error message is as follows: [ 377.706202] kernel BUG at drivers/gpu/drm/drm_buddy.c:278! [ 377.706215] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 377.706222] CPU: 4 PID: 8610 Comm: modprobe Tainted: G IOE 6.0.0-thomas #1 [ 377.706231] Hardware name: ASUS System Product Name/PRIME Z390-A, BIOS 2004 11/02/2021 [ 377.706238] RIP: 0010:drm_buddy_free_block+0x26/0x30 [drm_buddy] [ 377.706264] Code: 00 00 00 90 0f 1f 44 00 00 48 8b 0e 89 c8 25 00 0c 00 00 3d 00 04 00 00 75 10 48 8b 47 18 48 d3 e0 48 01 47 28 e9 fa fe ff ff <0f> 0b 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 55 48 89 f5 53 [ 377.706282] RSP: 0018:ffffad2dc4683cb8 EFLAGS: 00010287 [ 377.706289] RAX: 0000000000000000 RBX: ffff8b1743bd5138 RCX: 0000000000000000 [ 377.706297] RDX: ffff8b1743bd5160 RSI: ffff8b1743bd5c78 RDI: ffff8b16d1b25f70 [ 377.706304] RBP: ffff8b1743bd59e0 R08: 0000000000000001 R09: 0000000000000001 [ 377.706311] R10: ffff8b16c8572400 R11: ffffad2dc4683cf0 R12: ffff8b16d1b25f70 [ 377.706318] R13: ffff8b16d1b25fd0 R14: ffff8b1743bd59c0 R15: ffff8b16d1b25f70 [ 377.706325] FS: 00007fec56c72c40(0000) GS:ffff8b1836500000(0000) knlGS:0000000000000000 [ 377.706334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 377.706340] CR2: 00007f9b88c1ba50 CR3: 0000000110450004 CR4: 00000000003706e0 [ 377.706347] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 377.706354] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 377.706361] Call Trace: [ 377.706365] <TASK> [ 377.706369] drm_buddy_free_list+0x2a/0x60 [drm_buddy] [ 377.706376] amdgpu_vram_mgr_fini+0xea/0x180 [amdgpu] [ 377.706572] amdgpu_ttm_fini+0x12e/0x1a0 [amdgpu] [ 377.706650] amdgpu_bo_fini+0x22/0x90 [amdgpu] [ 377.706727] gmc_v11_0_sw_fini+0x26/0x30 [amdgpu] [ 377.706821] amdgpu_device_fini_sw+0xa1/0x3c0 [amdgpu] [ 377.706897] amdgpu_driver_release_kms+0x12/0x30 [amdgpu] [ 377.706975] drm_dev_release+0x20/0x40 [drm] [ 377.707006] release_nodes+0x35/0xb0 [ 377.707014] devres_release_all+0x8b/0xc0 [ 377.707020] device_unbind_cleanup+0xe/0x70 [ 377.707027] device_release_driver_internal+0xee/0x160 [ 377.707033] driver_detach+0x44/0x90 [ 377.707039] bus_remove_driver+0x55/0xe0 [ 377.707045] pci_unregister_driver+0x3b/0x90 [ 377.707052] amdgpu_exit+0x11/0x6c [amdgpu] [ 377.707194] __x64_sys_delete_module+0x142/0x2b0 [ 377.707201] ? fpregs_assert_state_consistent+0x22/0x50 [ 377.707208] ? exit_to_user_mode_prepare+0x3e/0x190 [ 377.707215] do_syscall_64+0x38/0x90 [ 377.707221] entry_SYSCALL_64_after_hwframe+0x63/0xcd Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: make amdgpu_ucode_validate staticMario Limonciello
No consumers outside of amdgpu_ucode.c use amdgpu_ucode_validate anymore, so make the function static. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Use `amdgpu_ucode_*` helpers for GPU info binMario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Use `amdgpu_ucode_*` helpers for CGSMario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Use `amdgpu_ucode_*` helpers for VCEMario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Use `amdgpu_ucode_*` helpers for UVDMario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Use `amdgpu_ucode_*` helpers for SDMA on CIKMario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Use `amdgpu_ucode_*` helpers for SDMA3.0Mario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Use `amdgpu_ucode_*` helpers for SDMA2.4Mario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Use `amdgpu_ucode_*` helpers for GMC8Mario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Use `amdgpu_ucode_*` helpers for GMC7Mario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Use `amdgpu_ucode_*` helpers for GMC6Mario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Use `amdgpu_ucode_*` helpers for GFX8Mario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Use `amdgpu_ucode_*` helpers for GFX7Mario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Use `amdgpu_ucode_*` helpers for GFX6Mario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Optimize SRIOV switch/case for PSP microcode loadMario Limonciello
Now that IP version decoding is used, a number of case statements can be combined. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Use `amdgpu_ucode_*` helpers for PSPMario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Load PSP microcode during early_initMario Limonciello
Simplifies the code so that all PSP versions will get the firmware name from `amdgpu_ucode_ip_version_decode` and then use this filename to load microcode as part of the early_init process. Any failures will cause the driver to fail to probe before the firmware framebuffer has been removed. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Avoid BUG() for case of SRIOV missing IP versionMario Limonciello
No need to crash the kernel. AMDGPU will now fail to probe. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amd: Parse both v1 and v2 TA microcode headers using same functionMario Limonciello
Several IP versions duplicate code and can't use the common helpers. Move this code into a single function so that the helpers can be used. v2: squash in fix from Mario to remove duplicate ta parsing Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-10drm/amdgpu: fix pipeline sync v2Christian König
This fixes a potential memory leak of dma_fence objects in the CS code as well as glitches in firefox because of missing pipeline sync. v2: use the scheduler instead of the fence context Signed-off-by: Christian König <christian.koenig@amd.com> Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2323 Tested-by: Michal Kubecek mkubecek@suse.cz Tested-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230109130120.73389-1-christian.koenig@amd.com
2023-01-10drm: Only select I2C_ALGOBIT for drivers that actually need itUwe Kleine-König
While working on a drm driver that doesn't need the i2c algobit stuff I noticed that DRM selects this code even though only 8 drivers actually use it. While also only some drivers use i2c, keep the select for I2C for the next cleanup patch. Still prepare this already by also selecting I2C for the individual drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221219083627.1401627-1-u.kleine-koenig@pengutronix.de
2023-01-09drm/amdgpu: clean up some inconsistent indentingsYang Li
drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c:65 amdgpu_gem_fault() warn: inconsistent indenting Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3639 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-09drm/amd: Load GFX11 microcode during early_initMario Limonciello
If GFX11 microcode is required but not available during early init, the firmware framebuffer will have already been released and the screen will freeze. Move the request for GFX11 microcode into the early_init phase so that if it's not available, driver init will fail. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-09drm/amd: Use `amdgpu_ucode_*` helpers for GFX11Mario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper will provide symmetery on unload. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-09drm/amd: Load GFX10 microcode during early_initMario Limonciello
Simplifies the code so that GFX10 will get the firmware name from `amdgpu_ucode_ip_version_decode` and then use this filename to load microcode as part of the early_init process. Any failures will cause the driver to fail to probe before the firmware framebuffer has been removed. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-09drm/amd: Use `amdgpu_ucode_*` helpers for GFX10Mario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unload. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-09drm/amd: Load GFX9 microcode during early_initMario Limonciello
If GFX9 microcode is required but not available during early init, the firmware framebuffer will have already been released and the screen will freeze. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.3 (git 2.53.0) at 2026-11-12 02:11:07 +0000