| Age | Commit message (Collapse) | Author |
|---|
|
This commit fixes a format truncation issue arosed by the snprintf
function potentially writing more characters into the ring->name buffer
than it can hold, in the amdgpu_gfx_kiq_init_ring function
The issue occurred because the '%d' format specifier could write between
1 and 10 bytes into a region of size between 0 and 8, depending on the
values of xcc_id, ring->me, ring->pipe, and ring->queue. The snprintf
function could output between 12 and 41 bytes into a destination of size
16, leading to potential truncation.
To resolve this, the snprintf line was modified to use the '%hhu' format
specifier for xcc_id, ring->me, ring->pipe, and ring->queue. The '%hhu'
specifier is used for unsigned char variables and ensures that these
values are printed as unsigned decimal integers.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c: In function ‘amdgpu_gfx_kiq_init_ring’:
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:332:61: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size between 0 and 8 [-Wformat-truncation=]
332 | snprintf(ring->name, sizeof(ring->name), "kiq_%d.%d.%d.%d",
| ^~
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:332:50: note: directive argument in the range [0, 2147483647]
332 | snprintf(ring->name, sizeof(ring->name), "kiq_%d.%d.%d.%d",
| ^~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:332:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 16
332 | snprintf(ring->name, sizeof(ring->name), "kiq_%d.%d.%d.%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
333 | xcc_id, ring->me, ring->pipe, ring->queue);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 345a36c4f1ba ("drm/amdgpu: prefer snprintf over sprintf")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since the type of pg_flags is u32, adev->pg_flags >> 16 >> 16 is 0
regardless of the values of its operands.
So removing the operations upper_32_bits and lower_32_bits.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Port mes11 hw_fini to mes12, fix for mode1 reset.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since the type of data_size is uint32_t, adev->umsch_mm.data_size - 1 >> 16 >> 16 is 0
regardless of the values of its operands
So removing the operations upper_32_bits and lower_32_bits.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When user space sets an invalid ta type, the pointer context will be empty.
So it need to check the pointer context before using it
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
skip to create 'xxx_err_count' node when ACA is enabled.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_connector_edid() copies the EDID from edid_blob_ptr as a side
effect if amdgpu_connector->edid isn't initialized. However, everywhere
that the returned EDID is used, the EDID should have been set
beforehands.
Only the drm EDID code should look at the EDID property, anyway, so stop
using it.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Pan
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Robert Foss <rfoss@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1463862965d76e9458551598fd4d287a08d3d264.1715353572.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
|
|
[Why]
The vram width value is 0.
Because the integratedsysteminfo table in VBIOS has updated to 2.3.
[How]
Driver needs a new intergrated info v2.3 table too.
Then the vram width value will be correct.
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
|
|
Small APUs(i.e., consumer, embedded products) usually have a small
carveout device memory which can't satisfy most compute workloads
memory allocation requirements.
We can't even run a Basic MNIST Example with a default 512MB carveout.
https://github.com/pytorch/examples/tree/main/mnist. Error Log:
"torch.cuda.OutOfMemoryError: HIP out of memory. Tried to allocate
84.00 MiB. GPU 0 has a total capacity of 512.00 MiB of which 0 bytes
is free. Of the allocated memory 103.83 MiB is allocated by PyTorch,
and 22.17 MiB is reserved by PyTorch but unallocated"
Though we can change BIOS settings to enlarge carveout size,
which is inflexible and may bring complaint. On the other hand,
the memory resource can't be effectively used between host and device.
The solution is MI300A approach, i.e., let VRAM allocations go to GTT.
Then device and host can flexibly and effectively share memory resource.
v2: Report local_mem_size_private as 0. (Felix)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Observed on gfx8 ASIC where KFD_IOC_ALLOC_MEM_FLAGS_AQL_QUEUE_MEM is used.
Two attachments use the same VM, root PD would be locked twice.
[ 57.910418] Call Trace:
[ 57.793726] ? reserve_bo_and_cond_vms+0x111/0x1c0 [amdgpu]
[ 57.793820] amdgpu_amdkfd_gpuvm_unmap_memory_from_gpu+0x6c/0x1c0 [amdgpu]
[ 57.793923] ? idr_get_next_ul+0xbe/0x100
[ 57.793933] kfd_process_device_free_bos+0x7e/0xf0 [amdgpu]
[ 57.794041] kfd_process_wq_release+0x2ae/0x3c0 [amdgpu]
[ 57.794141] ? process_scheduled_works+0x29c/0x580
[ 57.794147] process_scheduled_works+0x303/0x580
[ 57.794157] ? __pfx_worker_thread+0x10/0x10
[ 57.794160] worker_thread+0x1a2/0x370
[ 57.794165] ? __pfx_worker_thread+0x10/0x10
[ 57.794167] kthread+0x11b/0x150
[ 57.794172] ? __pfx_kthread+0x10/0x10
[ 57.794177] ret_from_fork+0x3d/0x60
[ 57.794181] ? __pfx_kthread+0x10/0x10
[ 57.794184] ret_from_fork_asm+0x1b/0x30
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Align kerneldoc with the function argument name.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 26e20235ce00 ("drm/amdgpu: Add amdgpu_bo_is_vm_bo helper")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'hqd_registers' used to be used in a member of the 'bonaire_mqd'
struct. 'bonaire_mqd' was removed by
commit 486d807cd9a9 ("drm/amdgpu: remove duplicate definition of cik_mqd")
It's now unused.
Remove 'hqd_registers' as well.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Avoid overflow issue.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The guest recovery sequence is buggy in Fatal Error when both
FLR & KFD reset workitems are queued at the same time. In addition,
FLR guest recovery sequence is out of order when PF/VF communication
breaks due to a GPU fatal error
As a temporary work around, perform a KFD style reset (Initiate reset
request from the guest) inside the pf2vf thread on FED.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Runtime KIQ interface to read/write registers in VF may take longer
than expected for BM environment. Extend the timeout.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
|
|
fix ACA no query result after gpu reset.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace the legacy interface with amdgpu_dpm_set_pm_policy to set XGMI
PLPD mode. Also, xgmi_plpd_policy sysfs node is not used by any client.
Remove that as well.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
modify the lock type to 'spinlock' to avoid schedule issue
in interrupt context.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
modify the lock type to 'spinlock' to avoid schedule issue
in interrupt context.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Accurately show all placements when describing objects in debugfs, instead
of bunching them up under the 'CPU' placement.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
All apart from AMDGPU_GEM_DOMAIN_GTT memory domains map 1:1 to TTM
placements. And the former be either AMDGPU_PL_PREEMPT or TTM_PL_TT,
depending on AMDGPU_GEM_CREATE_PREEMPTIBLE.
Simplify a few places in the code which convert the TTM placement into
a domain by checking against the current placement directly.
In the conversion AMDGPU_PL_PREEMPT either does not have to be handled
because amdgpu_mem_type_to_domain() cannot return that value anyway.
v2:
* Remove AMDGPU_PL_PREEMPT handling.
v3:
* Rebase.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com> # v1
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> # v2
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Help code readability by replacing a bunch of:
bo->tbo.base.resv == vm->root.bo->tbo.base.resv
With:
amdgpu_vm_is_bo_always_valid(vm, bo)
No functional changes.
v2:
* Rename helper and move to amdgpu_vm. (Christian)
v3:
* Use Christian's kerneldoc.
v4:
* Fixed logic inversion in amdgpu_vm_bo_get_memory.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
sdma_v7_0_ring_set_wptr
This commit removes a duplicate check for *is_queue_unmap in the
sdma_v7_0_ring_set_wptr function. The check at line 171 was considered
dead code because at this point in the code, we already know that
*is_queue_unmap is false due to the check at line 161.
By removing this unnecessary check, improves the readability of the
code
Fixes the below:
drivers/gpu/drm/amd/amdgpu/sdma_v7_0.c:171 sdma_v7_0_ring_set_wptr()
warn: duplicate check '*is_queue_unmap' (previous on line 161)
drivers/gpu/drm/amd/amdgpu/sdma_v7_0.c
140 static void sdma_v7_0_ring_set_wptr(struct amdgpu_ring *ring)
141 {
142 struct amdgpu_device *adev = ring->adev;
143 uint32_t *wptr_saved;
144 uint32_t *is_queue_unmap;
145 uint64_t aggregated_db_index;
146 uint32_t mqd_size = adev->mqds[AMDGPU_HW_IP_DMA].mqd_size;
147
148 DRM_DEBUG("Setting write pointer\n");
149
150 if (ring->is_mes_queue) {
151 wptr_saved = (uint32_t *)(ring->mqd_ptr + mqd_size);
152 is_queue_unmap = (uint32_t *)(ring->mqd_ptr + mqd_size +
^^^^^^^^^^^^^^^^ Set here
153 sizeof(uint32_t));
154 aggregated_db_index =
155 amdgpu_mes_get_aggregated_doorbell_index(adev,
156 ring->hw_prio);
157
158 atomic64_set((atomic64_t *)ring->wptr_cpu_addr,
159 ring->wptr << 2);
160 *wptr_saved = ring->wptr << 2;
161 if (*is_queue_unmap) {
^^^^^^^^^^^^^^^ Checked here
162 WDOORBELL64(aggregated_db_index, ring->wptr << 2);
163 DRM_DEBUG("calling WDOORBELL64(0x%08x, 0x%016llx)\n",
164 ring->doorbell_index, ring->wptr << 2);
165 WDOORBELL64(ring->doorbell_index, ring->wptr << 2);
166 } else {
167 DRM_DEBUG("calling WDOORBELL64(0x%08x, 0x%016llx)\n",
168 ring->doorbell_index, ring->wptr << 2);
169 WDOORBELL64(ring->doorbell_index, ring->wptr << 2);
170
--> 171 if (*is_queue_unmap)
^^^^^^^^^^^^^^^ This is dead code. We know it's false.
172 WDOORBELL64(aggregated_db_index,
173 ring->wptr << 2);
174 }
175 } else {
176 if (ring->use_doorbell) {
177 DRM_DEBUG("Using doorbell -- "
178 "wptr_offs == 0x%08x "
Fixes: b412351e91bd ("drm/amdgpu: Add sdma v7_0 ip block support (v7)")
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The following commit updated gmc->noretry from 0 to 1 for GC HW IP
9.3.0:
commit 5f3854f1f4e2 ("drm/amdgpu: add more cases to noretry=1")
This causes the device to hang when a page fault occurs, until the
device is rebooted. Instead, revert back to gmc->noretry=0 so the device
is still responsive.
Fixes: 5f3854f1f4e2 ("drm/amdgpu: add more cases to noretry=1")
Signed-off-by: Tim Van Patten <timvp@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the capabilities for supporting 8k encoding.
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
./drivers/gpu/drm/amd/amdgpu/amdgpu.h: amdgpu_umsch_mm.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9063
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add module parameter for jpeg. this is a temporary workaround for jpeg unit test fail
on vcn 5.0 now. will be removed later.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix up parameter descriptions.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To catch GPU mapping of system memory, TTM_PL_TT and AMDGPU_PL_PREEMPT
must be checked.
Fixes: 628e1ace2379 ("drm/amdkfd: mark GFX12 system and peer GPU memory mappings as MTYPE_NC")
Signed-off-by: Sreekant Somasekharan <sreekant.somasekharan@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix up parameter descriptions.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
create a new helper function to avoid compiler 'side-effect'
check about RAS_EVENT_LOG() macro.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
gfx12 query video mem channel/type/width from umc_info of atom list, so
fix it accordingly.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
use mc address for wptr in add queue packet
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable GFXOFF for GC v12.0.0.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable mmhub and athub cg on gc 12.0.0
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Switch the default mes to uni mes for gfx v12.
V2: remove uni_mes set for gfx v11.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use debug_mask=0x10 (BIT.4) param to help enable RAS ACA.
(RAS ACA is disabled by default.)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable 3D cgcg, 3D cgls, sram fgcg, perfcounter mgcg,
repeater fgcg for gc v12.0.0.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check ras_manager before using it
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 8a774fe912ff ("drm/amdgpu: avoid restore process run into dead loop")
since buffer got pinned is not related whether it needs mapping
And skip buffer validation at kfd driver if the buffer has been pinned.
Signed-off-by: Xiaogang Chen <Xiaogang.Chen@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add GMC API to fetch NPS range information from discovery table. Use NPS
range information in GMC 9.4.3 SOCs when available, otherwise fallback
to software method.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The special case for VM passthrough doesn't check adev->nbio.funcs
before dereferencing it. If GPUs that don't have an NBIO block are
passed through, this leads to a NULL pointer dereference on startup.
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Fixes: 1bece222eabe ("drm/amdgpu: Clear doorbell interrupt status for Sienna Cichlid")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Consider the 16M reserved region also before range calculation for GMC
9.4.3 SOCs.
Fixes: a433f1f59484 ("drm/amdgpu: Initialize memory ranges for GC 9.4.3")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable GFX CGCG and CGLS for gfx version 12.0.0.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable PG on JPEG5
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Support IMU for ASIC with GC 12.0.0
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove dead code in amdgpu_ras_add_mca_err_addr
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
