summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)Author
2022-07-14pktcdvd: stop using bdevname in pkt_new_devChristoph Hellwig
Just use the %pg format specifier instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220713055317.1888500-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14pktcdvd: stop using bdevname in pkt_seq_showChristoph Hellwig
Just use the %pg format specifier instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220713055317.1888500-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14drbd: stop using bdevname in drbd_report_io_errorChristoph Hellwig
Just use the %pg format specifier instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220713055317.1888500-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14ublk_drv: fix request queue leakMing Lei
Call blk_cleanup_queue() in release code path for fixing request queue leak. Also for-5.20/block has cleaned up blk_cleanup_queue(), which is basically merged to del_gendisk() if blk_mq_alloc_disk() is used for allocating disk and queue. However, ublk may not add disk in case of starting device failure, then del_gendisk() won't be called when removing ublk device, so blk_mq_exit_queue will not be callsed, and it can be bit hard to deal with this kind of merge conflict. Turns out ublk's queue/disk use model is very similar with scsi, so switch to scsi's model by allocating disk and queue independently, then it can be quite easy to handle v5.20 merge conflict by replacing blk_cleanup_queue with blk_mq_destroy_queue. Reported-by: Jens Axboe <axboe@kernel.dk> Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220714103201.131648-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14ublk_drv: support to complete io command via task_work_addMing Lei
Use task_work_add if it is available, since task_work_add can bring up better performance, especially batching signaling ->ubq_daemon can be done. It is observed that task_work_add() can boost iops by +4% on random 4k io test. Also except for completing io command, all other code paths are same with completing io command via io_uring_cmd_complete_in_task. Meantime add one flag of UBLK_F_URING_CMD_COMP_IN_TASK for comparing the mode easily. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14ublk_drv: add io_uring based userspace block driverMing Lei
This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-06block: move zone related fields to struct gendiskChristoph Hellwig
Move the zone related fields that are currently stored in struct request_queue to struct gendisk as these are part of the highlevel block layer API and are only used for non-passthrough I/O that requires the gendisk. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220706070350.1703384-17-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-06block: replace blkdev_nr_zones with bdev_nr_zonesChristoph Hellwig
Pass a block_device instead of a request_queue as that is what most callers have at hand. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20220706070350.1703384-12-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-06block: pass a gendisk to blk_queue_max_open_zones and blk_queue_max_active_zonesChristoph Hellwig
Switch to a gendisk based API in preparation for moving all zone related fields from the request_queue to the gendisk. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220706070350.1703384-11-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-06block: pass a gendisk to blk_queue_set_zonedChristoph Hellwig
Prepare for storing the zone related field in struct gendisk instead of struct request_queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220706070350.1703384-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-06blk-mq: Drop 'reserved' arg of busy_tag_iter_fnJohn Garry
We no longer use the 'reserved' arg in busy_tag_iter_fn for any iter function so it may be dropped. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> #nvme Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/1657109034-206040-6-git-send-email-john.garry@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-06blk-mq: Drop blk_mq_ops.timeout 'reserved' argJohn Garry
With new API blk_mq_is_reserved_rq() we can tell if a request is from the reserved pool, so stop passing 'reserved' arg. There is actually only a single user of that arg for all the callback implementations, which can use blk_mq_is_reserved_rq() instead. This will also allow us to stop passing the same 'reserved' around the blk-mq iter functions next. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/1657109034-206040-4-git-send-email-john.garry@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-03zram: do not lookup algorithm in backends tableSergey Senozhatsky
Always use crypto_has_comp() so that crypto can lookup module, call usermodhelper to load the modules, wait for usermodhelper to finish and so on. Otherwise crypto will do all of these steps under CPU hot-plug lock and this looks like too much stuff to handle under the CPU hot-plug lock. Besides this can end up in a deadlock when usermodhelper triggers a code path that attempts to lock the CPU hot-plug lock, that zram already holds. An example of such deadlock: - path A. zram grabs CPU hot-plug lock, execs /sbin/modprobe from crypto and waits for modprobe to finish disksize_store zcomp_create __cpuhp_state_add_instance __cpuhp_state_add_instance_cpuslocked zcomp_cpu_up_prepare crypto_alloc_base crypto_alg_mod_lookup call_usermodehelper_exec wait_for_completion_killable do_wait_for_common schedule - path B. async work kthread that brings in scsi device. It wants to register CPUHP states at some point, and it needs the CPU hot-plug lock for that, which is owned by zram. async_run_entry_fn scsi_probe_and_add_lun scsi_mq_alloc_queue blk_mq_init_queue blk_mq_init_allocated_queue blk_mq_realloc_hw_ctxs __cpuhp_state_add_instance __cpuhp_state_add_instance_cpuslocked mutex_lock schedule - path C. modprobe sleeps, waiting for all aync works to finish. load_module do_init_module async_synchronize_full async_synchronize_cookie_domain schedule [senozhatsky@chromium.org: add comment] Link: https://lkml.kernel.org/r/20220624060606.1014474-1-senozhatsky@chromium.org Link: https://lkml.kernel.org/r/20220622023501.517125-1-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-01xen/blkfront: force data bouncing when backend is untrustedRoger Pau Monne
Split the current bounce buffering logic used with persistent grants into it's own option, and allow enabling it independently of persistent grants. This allows to reuse the same code paths to perform the bounce buffering required to avoid leaking contiguous data in shared pages not part of the request fragments. Reporting whether the backend is to be trusted can be done using a module parameter, or from the xenstore frontend path as set by the toolstack when adding the device. This is CVE-2022-33742, part of XSA-403. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-07-01xen/blkfront: fix leaking data in shared pagesRoger Pau Monne
When allocating pages to be used for shared communication with the backend always zero them, this avoids leaking unintended data present on the pages. This is CVE-2022-26365, part of XSA-403. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-28block: remove blk_cleanup_diskChristoph Hellwig
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-28block: simplify disk shutdownChristoph Hellwig
Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for all disks that do not have separately allocated queues, and thus remove the need to call blk_cleanup_queue for them. Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that this function is intended only for separately allocated blk-mq queues. This saves an extra queue freeze for devices without a separately allocated queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20220619060552.1850436-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-28mtip32xx: fix device removalChristoph Hellwig
Use the proper helper to mark a surpise removal, remove the gendisk as soon as possible when removing the device and implement the ->free_disk callback to ensure the private data is alive as long as the gendisk has references. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20220619060552.1850436-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-28mtip32xx: remove the device_status debugfs fileChristoph Hellwig
This file is a huge mess that iterates over all devices and is in the way of fixing the device removal in this driver, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20220619060552.1850436-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-21xen-blkfront: Handle NULL gendiskJason Andryuk
When a VBD is not fully created and then closed, the kernel can have a NULL pointer dereference: The reproducer is trivial: [user@dom0 ~]$ sudo xl block-attach work backend=sys-usb vdev=xvdi target=/dev/sdz [user@dom0 ~]$ xl block-list work Vdev BE handle state evt-ch ring-ref BE-path 51712 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51712 51728 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51728 51744 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51744 51760 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51760 51840 3 241 3 -1 -1 /local/domain/3/backend/vbd/241/51840 ^ note state, the /dev/sdz doesn't exist in the backend [user@dom0 ~]$ sudo xl block-detach work xvdi [user@dom0 ~]$ xl block-list work Vdev BE handle state evt-ch ring-ref BE-path work is an invalid domain identifier And its console has: BUG: kernel NULL pointer dereference, address: 0000000000000050 PGD 80000000edebb067 P4D 80000000edebb067 PUD edec2067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 52 Comm: xenwatch Not tainted 5.16.18-2.43.fc32.qubes.x86_64 #1 RIP: 0010:blk_mq_stop_hw_queues+0x5/0x40 Code: 00 48 83 e0 fd 83 c3 01 48 89 85 a8 00 00 00 41 39 5c 24 50 77 c0 5b 5d 41 5c 41 5d c3 c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <8b> 47 50 85 c0 74 32 41 54 49 89 fc 55 53 31 db 49 8b 44 24 48 48 RSP: 0018:ffffc90000bcfe98 EFLAGS: 00010293 RAX: ffffffffc0008370 RBX: 0000000000000005 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 RBP: ffff88800775f000 R08: 0000000000000001 R09: ffff888006e620b8 R10: ffff888006e620b0 R11: f000000000000000 R12: ffff8880bff39000 R13: ffff8880bff39000 R14: 0000000000000000 R15: ffff88800604be00 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 00000000e932e002 CR4: 00000000003706e0 Call Trace: <TASK> blkback_changed+0x95/0x137 [xen_blkfront] ? read_reply+0x160/0x160 xenwatch_thread+0xc0/0x1a0 ? do_wait_intr_irq+0xa0/0xa0 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device snd_timer snd soundcore ipt_REJECT nf_reject_ipv4 xt_state xt_conntrack nft_counter nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_compat nf_tables nfnetlink intel_rapl_msr intel_rapl_common crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel xen_netfront pcspkr xen_scsiback target_core_mod xen_netback xen_privcmd xen_gntdev xen_gntalloc xen_blkback xen_evtchn ipmi_devintf ipmi_msghandler fuse bpf_preload ip_tables overlay xen_blkfront CR2: 0000000000000050 ---[ end trace 7bc9597fd06ae89d ]--- RIP: 0010:blk_mq_stop_hw_queues+0x5/0x40 Code: 00 48 83 e0 fd 83 c3 01 48 89 85 a8 00 00 00 41 39 5c 24 50 77 c0 5b 5d 41 5c 41 5d c3 c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <8b> 47 50 85 c0 74 32 41 54 49 89 fc 55 53 31 db 49 8b 44 24 48 48 RSP: 0018:ffffc90000bcfe98 EFLAGS: 00010293 RAX: ffffffffc0008370 RBX: 0000000000000005 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 RBP: ffff88800775f000 R08: 0000000000000001 R09: ffff888006e620b8 R10: ffff888006e620b0 R11: f000000000000000 R12: ffff8880bff39000 R13: ffff8880bff39000 R14: 0000000000000000 R15: ffff88800604be00 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 00000000e932e002 CR4: 00000000003706e0 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled info->rq and info->gd are only set in blkfront_connect(), which is called for state 4 (XenbusStateConnected). Guard against using NULL variables in blkfront_closing() to avoid the issue. The rest of blkfront_closing looks okay. If info->nr_rings is 0, then for_each_rinfo won't do anything. blkfront_remove also needs to check for non-NULL pointers before cleaning up the gendisk and request queue. Fixes: 05d69d950d9d "xen-blkfront: sanitize the removal state machine" Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220601195341.28581-1-jandryuk@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-04Merge tag 'for-linus-5.19-rc1b-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: "Two cleanup patches for Xen related code and (more important) an update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step down" * tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: replace xen_remap() with memremap() MAINTAINERS: Update Xen maintainership xen: switch gnttab_end_foreign_access() to take a struct page pointer
2022-06-03Merge tag 'for-5.19/drivers-2022-06-02' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull more block driver updates from Jens Axboe: "A collection of stragglers that were late on sending in their changes and just followup fixes. - NVMe fixes pull request via Christoph: - set controller enable bit in a separate write (Niklas Cassel) - disable namespace identifiers for the MAXIO MAP1001 (Christoph) - fix a comment typo (Julia Lawall)" - MD fixes pull request via Song: - Remove uses of bdevname (Christoph Hellwig) - Bug fixes (Guoqing Jiang, and Xiao Ni) - bcache fixes series (Coly) - null_blk zoned write fix (Damien) - nbd fixes (Yu, Zhang) - Fix for loop partition scanning (Christoph)" * tag 'for-5.19/drivers-2022-06-02' of git://git.kernel.dk/linux-block: (23 commits) block: null_blk: Fix null_zone_write() nvmet: fix typo in comment nvme: set controller enable bit in a separate write nvme-pci: disable namespace identifiers for the MAXIO MAP1001 bcache: avoid unnecessary soft lockup in kworker update_writeback_rate() nbd: use pr_err to output error message nbd: fix possible overflow on 'first_minor' in nbd_dev_add() nbd: fix io hung while disconnecting device nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completed nbd: fix race between nbd_alloc_config() and module removal nbd: call genl_unregister_family() first in nbd_cleanup() md: bcache: check the return value of kzalloc() in detached_dev_do_request() bcache: memset on stack variables in bch_btree_check() and bch_sectors_dirty_init() block, loop: support partitions without scanning bcache: avoid journal no-space deadlock by reserving 1 journal bucket bcache: remove incremental dirty sector counting for bch_sectors_dirty_init() bcache: improve multithreaded bch_sectors_dirty_init() bcache: improve multithreaded bch_btree_check() md: fix double free of io_acct_set bioset md: Don't set mddev private to NULL in raid0 pers->free ...
2022-06-03Merge tag 'for-5.19/block-exec-2022-06-02' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block request execute cleanups from Jens Axboe: "This change was advertised in the initial core block pull request, but didn't actually make that branch as we deferred it to a post-merge pull request to avoid a bunch of cross branch issues. This series cleans up the block execute path quite nicely" * tag 'for-5.19/block-exec-2022-06-02' of git://git.kernel.dk/linux-block: blk-mq: remove the done argument to blk_execute_rq_nowait blk-mq: avoid a mess of casts for blk_end_sync_rq blk-mq: remove __blk_execute_rq_nowait
2022-06-03Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "vhost,virtio and vdpa features, fixes, and cleanups: - mac vlan filter and stats support in mlx5 vdpa - irq hardening in virtio - performance improvements in virtio crypto - polling i/o support in virtio blk - ASID support in vhost - fixes, cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits) vdpa: ifcvf: set pci driver data in probe vdpa/mlx5: Add RX MAC VLAN filter support vdpa/mlx5: Remove flow counter from steering vhost: rename vhost_work_dev_flush vhost-test: drop flush after vhost_dev_cleanup vhost-scsi: drop flush after vhost_dev_cleanup vhost_vsock: simplify vhost_vsock_flush() vhost_test: remove vhost_test_flush_vq() vhost_net: get rid of vhost_net_flush_vq() and extra flush calls vhost: flush dev once during vhost_dev_stop vhost: get rid of vhost_poll_flush() wrapper vhost-vdpa: return -EFAULT on copy_to_user() failure vdpasim: Off by one in vdpasim_set_group_asid() virtio: Directly use ida_alloc()/free() virtio: use WARN_ON() to warning illegal status value virtio: harden vring IRQ virtio: allow to unbreak virtqueue virtio-ccw: implement synchronize_cbs() virtio-mmio: implement synchronize_cbs() virtio-pci: implement synchronize_cbs() ...
2022-06-02Merge tag 'ceph-for-5.19-rc1' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "A big pile of assorted fixes and improvements for the filesystem with nothing in particular standing out, except perhaps that the fact that the MDS never really maintained atime was made official and thus it's no longer updated on the client either. We also have a MAINTAINERS update: Jeff is transitioning his filesystem maintainership duties to Xiubo" * tag 'ceph-for-5.19-rc1' of https://github.com/ceph/ceph-client: (23 commits) MAINTAINERS: move myself from ceph "Maintainer" to "Reviewer" ceph: fix decoding of client session messages flags ceph: switch TASK_INTERRUPTIBLE to TASK_KILLABLE ceph: remove redundant variable ino ceph: try to queue a writeback if revoking fails ceph: fix statfs for subdir mounts ceph: fix possible deadlock when holding Fwb to get inline_data ceph: redirty the page for writepage on failure ceph: try to choose the auth MDS if possible for getattr ceph: disable updating the atime since cephfs won't maintain it ceph: flush the mdlog for filesystem sync ceph: rename unsafe_request_wait() libceph: use swap() macro instead of taking tmp variable ceph: fix statx AT_STATX_DONT_SYNC vs AT_STATX_FORCE_SYNC check ceph: no need to invalidate the fscache twice ceph: replace usage of found with dedicated list iterator variable ceph: use dedicated list iterator variable ceph: update the dlease for the hashed dentry when removing ceph: stop retrying the request when exceeding 256 times ceph: stop forwarding the request when exceeding 256 times ...
2022-06-02block: null_blk: Fix null_zone_write()Damien Le Moal
The bio and rq fields of struct nullb_cmd are now overlapping in a union. So we cannot use a test on ->bio being non-NULL to detect the NULL_Q_BIO queue mode. null_zone_write() use such broken test to set the sector position of a zone append write in the command bio or request. When the null_blk device uses the NULL_Q_MQ queue mode, null_zone_write() wrongly end up setting the bio sector position, resulting in the command request to be broken and random crashes following. Fix this by testing the device queue mode directly. Fixes: 8ba816b23abd ("null-blk: save memory footprint for struct nullb_cmd") Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220602120344.1365329-1-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-31virtio-blk: support mq_ops->queue_rqs()Suwan Kim
This patch supports mq_ops->queue_rqs() hook. It has an advantage of batch submission to virtio-blk driver. It also helps polling I/O because polling uses batched completion of block layer. Batch submission in queue_rqs() can boost polling performance. In queue_rqs(), it iterates plug->mq_list, collects requests that belong to same HW queue until it encounters a request from other HW queue or sees the end of the list. Then, virtio-blk adds requests into virtqueue and kicks virtqueue to submit requests. If there is an error, it inserts error request to requeue_list and passes it to ordinary block layer path. For verification, I did fio test. (io_uring, randread, direct=1, bs=4K, iodepth=64 numjobs=N) I set 4 vcpu and 2 virtio-blk queues for VM and run fio test 5 times. It shows about 2% improvement. | numjobs=2 | numjobs=4 ----------------------------------------------------------- fio without queue_rqs() | 291K IOPS | 238K IOPS ----------------------------------------------------------- fio with queue_rqs() | 295K IOPS | 243K IOPS For polling I/O performance, I also did fio test as below. (io_uring, hipri, randread, direct=1, bs=512, iodepth=64 numjobs=4) I set 4 vcpu and 2 poll queues for VM. It shows about 2% improvement in polling I/O. | IOPS | avg latency ----------------------------------------------------------- fio poll without queue_rqs() | 424K | 613.05 usec ----------------------------------------------------------- fio poll with queue_rqs() | 435K | 601.01 usec Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Message-Id: <20220406153207.163134-3-suwan.kim027@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
2022-05-31virtio-blk: support polling I/OSuwan Kim
This patch supports polling I/O via virtio-blk driver. Polling feature is enabled by module parameter "poll_queues" and it sets dedicated polling queues for virtio-blk. This patch improves the polling I/O throughput and latency. The virtio-blk driver doesn't not have a poll function and a poll queue and it has been operating in interrupt driven method even if the polling function is called in the upper layer. virtio-blk polling is implemented upon 'batched completion' of block layer. virtblk_poll() queues completed request to io_comp_batch->req_list and later, virtblk_complete_batch() calls unmap function and ends the requests in batch. virtio-blk reads the number of poll queues from module parameter "poll_queues". If VM sets queue parameter as below, ("num-queues=N" [QEMU property], "poll_queues=M" [module parameter]) It allocates N virtqueues to virtio_blk->vqs[N] and it uses [0..(N-M-1)] as default queues and [(N-M)..(N-1)] as poll queues. Unlike the default queues, the poll queues have no callback function. Regarding HW-SW queue mapping, the default queue mapping uses the existing method that condsiders MSI irq vector. But the poll queue doesn't have an irq, so it uses the regular blk-mq cpu mapping. For verifying the improvement, I did Fio polling I/O performance test with io_uring engine with the options below. (io_uring, hipri, randread, direct=1, bs=512, iodepth=64 numjobs=N) I set 4 vcpu and 4 virtio-blk queues - 2 default queues and 2 poll queues for VM. As a result, IOPS and average latency improved about 10%. Test result: - Fio io_uring poll without virtio-blk poll support -- numjobs=1 : IOPS = 339K, avg latency = 188.33us -- numjobs=2 : IOPS = 367K, avg latency = 347.33us -- numjobs=4 : IOPS = 383K, avg latency = 682.06us - Fio io_uring poll with virtio-blk poll support -- numjobs=1 : IOPS = 385K, avg latency = 165.94us -- numjobs=2 : IOPS = 408K, avg latency = 313.28us -- numjobs=4 : IOPS = 424K, avg latency = 613.05us Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Message-Id: <20220406153207.163134-2-suwan.kim027@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
2022-05-28blk-mq: remove the done argument to blk_execute_rq_nowaitChristoph Hellwig
Let the caller set it together with the end_io_data instead of passing a pointless argument. Note the the target code did in fact already set it and then just overrode it again by calling blk_execute_rq_nowait. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220524121530.943123-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-27nbd: use pr_err to output error messageYu Kuai
Instead of using the long printk(KERN_ERR "nbd: ...") to output error message, defining pr_fmt and using the short pr_err("") to do that. The replacemen is done by using the following command: sed -i 's/printk(KERN_ERR "nbd: /pr_err("/g' \ drivers/block/nbd.c This patch also rewrap to 80 columns where possible. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220521073749.3146892-7-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-27nbd: fix possible overflow on 'first_minor' in nbd_dev_add()Zhang Wensheng
When 'index' is a big numbers, it may become negative which forced to 'int'. then 'index << part_shift' might overflow to a positive value that is not greater than '0xfffff', then sysfs might complains about duplicate creation. Because of this, move the 'index' judgment to the front will fix it and be better. Fixes: b0d9111a2d53 ("nbd: use an idr to keep track of nbd devices") Fixes: 940c264984fd ("nbd: fix possible overflow for 'first_minor' in nbd_dev_add()") Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220521073749.3146892-6-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-27nbd: fix io hung while disconnecting deviceYu Kuai
In our tests, "qemu-nbd" triggers a io hung: INFO: task qemu-nbd:11445 blocked for more than 368 seconds. Not tainted 5.18.0-rc3-next-20220422-00003-g2176915513ca #884 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:qemu-nbd state:D stack: 0 pid:11445 ppid: 1 flags:0x00000000 Call Trace: <TASK> __schedule+0x480/0x1050 ? _raw_spin_lock_irqsave+0x3e/0xb0 schedule+0x9c/0x1b0 blk_mq_freeze_queue_wait+0x9d/0xf0 ? ipi_rseq+0x70/0x70 blk_mq_freeze_queue+0x2b/0x40 nbd_add_socket+0x6b/0x270 [nbd] nbd_ioctl+0x383/0x510 [nbd] blkdev_ioctl+0x18e/0x3e0 __x64_sys_ioctl+0xac/0x120 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fd8ff706577 RSP: 002b:00007fd8fcdfebf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000040000000 RCX: 00007fd8ff706577 RDX: 000000000000000d RSI: 000000000000ab00 RDI: 000000000000000f RBP: 000000000000000f R08: 000000000000fbe8 R09: 000055fe497c62b0 R10: 00000002aff20000 R11: 0000000000000246 R12: 000000000000006d R13: 0000000000000000 R14: 00007ffe82dc5e70 R15: 00007fd8fcdff9c0 "qemu-ndb -d" will call ioctl 'NBD_DISCONNECT' first, however, following message was found: block nbd0: Send disconnect failed -32 Which indicate that something is wrong with the server. Then, "qemu-nbd -d" will call ioctl 'NBD_CLEAR_SOCK', however ioctl can't clear requests after commit 2516ab1543fd("nbd: only clear the queue on device teardown"). And in the meantime, request can't complete through timeout because nbd_xmit_timeout() will always return 'BLK_EH_RESET_TIMER', which means such request will never be completed in this situation. Now that the flag 'NBD_CMD_INFLIGHT' can make sure requests won't complete multiple times, switch back to call nbd_clear_sock() in nbd_clear_sock_ioctl(), so that inflight requests can be cleared. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220521073749.3146892-5-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-27nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completedYu Kuai
Otherwise io will hung because request will only be completed if the cmd has the flag 'NBD_CMD_INFLIGHT'. Fixes: 07175cb1baf4 ("nbd: make sure request completion won't concurrent") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20220521073749.3146892-4-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-27nbd: fix race between nbd_alloc_config() and module removalYu Kuai
When nbd module is being removing, nbd_alloc_config() may be called concurrently by nbd_genl_connect(), although try_module_get() will return false, but nbd_alloc_config() doesn't handle it. The race may lead to the leak of nbd_config and its related resources (e.g, recv_workq) and oops in nbd_read_stat() due to the unload of nbd module as shown below: BUG: kernel NULL pointer dereference, address: 0000000000000040 Oops: 0000 [#1] SMP PTI CPU: 5 PID: 13840 Comm: kworker/u17:33 Not tainted 5.14.0+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Workqueue: knbd16-recv recv_work [nbd] RIP: 0010:nbd_read_stat.cold+0x130/0x1a4 [nbd] Call Trace: recv_work+0x3b/0xb0 [nbd] process_one_work+0x1ed/0x390 worker_thread+0x4a/0x3d0 kthread+0x12a/0x150 ret_from_fork+0x22/0x30 Fixing it by checking the return value of try_module_get() in nbd_alloc_config(). As nbd_alloc_config() may return ERR_PTR(-ENODEV), assign nbd->config only when nbd_alloc_config() succeeds to ensure the value of nbd->config is binary (valid or NULL). Also adding a debug message to check the reference counter of nbd_config during module removal. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220521073749.3146892-3-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-27nbd: call genl_unregister_family() first in nbd_cleanup()Yu Kuai
Otherwise there may be race between module removal and the handling of netlink command, which can lead to the oops as shown below: BUG: kernel NULL pointer dereference, address: 0000000000000098 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 31299 Comm: nbd-client Tainted: G E 5.14.0-rc4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:down_write+0x1a/0x50 Call Trace: start_creating+0x89/0x130 debugfs_create_dir+0x1b/0x130 nbd_start_device+0x13d/0x390 [nbd] nbd_genl_connect+0x42f/0x748 [nbd] genl_family_rcv_msg_doit.isra.0+0xec/0x150 genl_rcv_msg+0xe5/0x1e0 netlink_rcv_skb+0x55/0x100 genl_rcv+0x29/0x40 netlink_unicast+0x1a8/0x250 netlink_sendmsg+0x21b/0x430 ____sys_sendmsg+0x2a4/0x2d0 ___sys_sendmsg+0x81/0xc0 __sys_sendmsg+0x62/0xb0 __x64_sys_sendmsg+0x1f/0x30 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: nbd(E-) Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220521073749.3146892-2-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-27block, loop: support partitions without scanningChristoph Hellwig
Historically we did distinguish between a flag that surpressed partition scanning, and a combinations of the minors variable and another flag if any partitions were supported. This was generally confusing and doesn't make much sense, but some corner case uses of the loop driver actually do want to support manually added partitions on a device that does not actively scan for partitions. To make things worsee the loop driver also wants to dynamically toggle the scanning for partitions on a live gendisk, which makes the disk->flags updates non-atomic. Introduce a new GD_SUPPRESS_PART_SCAN bit in disk->state that disables just scanning for partitions, and toggle that instead of GENHD_FL_NO_PART in the loop driver. Fixes: 1ebe2e5f9d68 ("block: remove GENHD_FL_EXT_DEVT") Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220527055806.1972352-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-27xen: switch gnttab_end_foreign_access() to take a struct page pointerJuergen Gross
Instead of a virtual kernel address use a pointer of the associated struct page as second parameter of gnttab_end_foreign_access(). Most users have that pointer available already and are creating the virtual address from it, risking problems in case the memory is located in highmem. gnttab_end_foreign_access() itself won't need to get the struct page from the address again. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-26Merge tag 'mm-stable-2022-05-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Almost all of MM here. A few things are still getting finished off, reviewed, etc. - Yang Shi has improved the behaviour of khugepaged collapsing of readonly file-backed transparent hugepages. - Johannes Weiner has arranged for zswap memory use to be tracked and managed on a per-cgroup basis. - Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime enablement of the recent huge page vmemmap optimization feature. - Baolin Wang contributes a series to fix some issues around hugetlb pagetable invalidation. - Zhenwei Pi has fixed some interactions between hwpoisoned pages and virtualization. - Tong Tiangen has enabled the use of the presently x86-only page_table_check debugging feature on arm64 and riscv. - David Vernet has done some fixup work on the memcg selftests. - Peter Xu has taught userfaultfd to handle write protection faults against shmem- and hugetlbfs-backed files. - More DAMON development from SeongJae Park - adding online tuning of the feature and support for monitoring of fixed virtual address ranges. Also easier discovery of which monitoring operations are available. - Nadav Amit has done some optimization of TLB flushing during mprotect(). - Neil Brown continues to labor away at improving our swap-over-NFS support. - David Hildenbrand has some fixes to anon page COWing versus get_user_pages(). - Peng Liu fixed some errors in the core hugetlb code. - Joao Martins has reduced the amount of memory consumed by device-dax's compound devmaps. - Some cleanups of the arch-specific pagemap code from Anshuman Khandual. - Muchun Song has found and fixed some errors in the TLB flushing of transparent hugepages. - Roman Gushchin has done more work on the memcg selftests. ... and, of course, many smaller fixes and cleanups. Notably, the customary million cleanup serieses from Miaohe Lin" * tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits) mm: kfence: use PAGE_ALIGNED helper selftests: vm: add the "settings" file with timeout variable selftests: vm: add "test_hmm.sh" to TEST_FILES selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests selftests: vm: add migration to the .gitignore selftests/vm/pkeys: fix typo in comment ksm: fix typo in comment selftests: vm: add process_mrelease tests Revert "mm/vmscan: never demote for memcg reclaim" mm/kfence: print disabling or re-enabling message include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace" include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion" mm: fix a potential infinite loop in start_isolate_page_range() MAINTAINERS: add Muchun as co-maintainer for HugeTLB zram: fix Kconfig dependency warning mm/shmem: fix shmem folio swapoff hang cgroup: fix an error handling path in alloc_pagecache_max_30M() mm: damon: use HPAGE_PMD_SIZE tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate nodemask.h: fix compilation error with GCC12 ...
2022-05-25rbd: replace usage of found with dedicated list iterator variableJakob Koschel
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-05-25zram: fix Kconfig dependency warningRandy Dunlap
ZSMALLOC depends on MMU so ZRAM should also depend on MMU since 'select' does not follow any dependency chains. Fixes this Kconfig warning: WARNING: unmet direct dependencies detected for ZSMALLOC Depends on [n]: MMU [=n] Selected by [y]: - ZRAM [=y] && BLK_DEV [=y] && BLOCK [=y] && SYSFS [=y] && (CRYPTO_LZO [=y] || CRYPTO_ZSTD [=m] || CRYPTO_LZ4 [=m] || CRYPTO_LZ4HC [=n] || CRYPTO_842 [=n]) Link: https://lkml.kernel.org/r/20220522204027.22964-1-rdunlap@infradead.org Fixes: b3fbd58fcbb10 ("mm: Kconfig: simplify zswap configuration") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-23Merge tag 'for-linus-5.19-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - decouple the PV interface from kernel internals in the Xen scsifront/scsiback pv drivers - harden the Xen scsifront PV driver against a malicious backend driver - simplify Xen PV frontend driver ring page setup - support Xen setups with multiple domains created at boot time to tolerate Xenstore coming up late - two small cleanup patches * tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits) xen: add support for initializing xenstore later as HVM domain xen: sync xs_wire.h header with upstream xen x86: xen: remove STACK_FRAME_NON_STANDARD from xen_cpuid xen-blk{back,front}: Update contact points for buffer_squeeze_duration_ms and feature_persistent xen/xenbus: eliminate xenbus_grant_ring() xen/sndfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/usbfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/scsifront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/pcifront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/drmfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/tpmfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/netfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/blkfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/xenbus: add xenbus_setup_ring() service function xen: update ring.h xen/shbuf: switch xen-front-pgdir-shbuf to use INVALID_GRANT_REF xen/dmabuf: switch gntdev-dmabuf to use INVALID_GRANT_REF xen/sound: switch xen_snd_front to use INVALID_GRANT_REF xen/drm: switch xen_drm_front to use INVALID_GRANT_REF xen/usb: switch xen-hcd to use INVALID_GRANT_REF ...
2022-05-23Merge tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "Here are the driver updates queued up for 5.19. This contains: - NVMe pull requests via Christoph: - tighten the PCI presence check (Stefan Roese) - fix a potential NULL pointer dereference in an error path (Kyle Miller Smith) - fix interpretation of the DMRSL field (Tom Yan) - relax the data transfer alignment (Keith Busch) - verbose error logging improvements (Max Gurtovoy, Chaitanya Kulkarni) - misc cleanups (Chaitanya Kulkarni, Christoph) - set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni) - add support for TP4084 - Time-to-Ready Enhancements (Christoph) - MD pull request via Song: - Improve annotation in raid5 code, by Logan Gunthorpe - Support MD_BROKEN flag in raid-1/5/10, by Mariusz Tkaczyk - Other small fixes/cleanups - null_blk series making the configfs side much saner (Damien) - Various minor drbd cleanups and fixes (Haowen, Uladzislau, Jiapeng, Arnd, Cai) - Avoid using the system workqueue (and hence flushing it) in rnbd (Jack) - Avoid using the system workqueue (and hence flushing it) in aoe (Tetsuo) - Series fixing discard_alignment issues in drivers (Christoph) - Small series fixing drivers poking at disk->part0 for openers information (Christoph) - Series fixing deadlocks in loop (Christoph, Tetsuo) - Remove loop.h and add SPDX headers (Christoph) - Various fixes and cleanups (Julia, Xie, Yu)" * tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block: (72 commits) mtip32xx: fix typo in comment nvme: set non-mdts limits in nvme_scan_work nvme: add support for TP4084 - Time-to-Ready Enhancements nvme: split the enum used for various register constants nbd: Fix hung on disconnect request if socket is closed before nvme-fabrics: add a request timeout helper nvme-pci: harden drive presence detect in nvme_dev_disable() nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags nvme: mark internal passthru request RQF_QUIET nvme: remove unneeded include from constants file nvme: add missing status values to verbose logging nvme: set dma alignment to dword nvme: fix interpretation of DMRSL loop: remove most the top-of-file boilerplate comment from the UAPI header loop: remove most the top-of-file boilerplate comment loop: add a SPDX header loop: remove loop.h block: null_blk: Improve device creation with configfs block: null_blk: Cleanup messages block: null_blk: Cleanup device creation and deletion ...
2022-05-23Merge tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: "Here are the core block changes for 5.19. This contains: - blk-throttle accounting fix (Laibin) - Series removing redundant assignments (Michal) - Expose bio cache via the bio_set, so that DM can use it (Mike) - Finish off the bio allocation interface cleanups by dealing with the weirdest member of the family. bio_kmalloc combines a kmalloc for the bio and bio_vecs with a hidden bio_init call and magic cleanup semantics (Christoph) - Clean up the block layer API so that APIs consumed by file systems are (almost) only struct block_device based, so that file systems don't have to poke into block layer internals like the request_queue (Christoph) - Clean up the blk_execute_rq* API (Christoph) - Clean up various lose end in the blk-cgroup code to make it easier to follow in preparation of reworking the blkcg assignment for bios (Christoph) - Fix use-after-free issues in BFQ when processes with merged queues get moved to different cgroups (Jan) - BFQ fixes (Jan) - Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming, Wolfgang, me)" * tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits) blk-mq: fix typo in comment bfq: Remove bfq_requeue_request_body() bfq: Remove superfluous conversion from RQ_BIC() bfq: Allow current waker to defend against a tentative one bfq: Relax waker detection for shared queues blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE() blk-throttle: Set BIO_THROTTLED when bio has been throttled blk-cgroup: Remove unnecessary rcu_read_lock/unlock() blk-cgroup: always terminate io.stat lines block, bfq: make bfq_has_work() more accurate block, bfq: protect 'bfqd->queued' by 'bfqd->lock' block: cleanup the VM accounting in submit_bio block: Fix the bio.bi_opf comment block: reorder the REQ_ flags blk-iocost: combine local_stat and desc_stat to stat block: improve the error message from bio_check_eod block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone block: remove superfluous calls to blkcg_bio_issue_init kthread: unexport kthread_blkcg blk-cgroup: cleanup blkcg_maybe_throttle_current ...
2022-05-21mtip32xx: fix typo in commentJulia Lawall
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220521111145.81697-28-Julia.Lawall@inria.fr Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-19mm: Kconfig: simplify zswap configurationJohannes Weiner
- CONFIG_ZRAM: Zram is a user-facing feature, whereas zsmalloc is not. Don't make the user chase down a technical dependency like that, just select it in automatically when zram is requested. The CONFIG_CRYPTO dependency is redundant due to more specific deps. - CONFIG_ZPOOL: This is not a user-facing feature. Hide the symbol and have it selected in as needed. - CONFIG_ZSWAP: Select CRYPTO instead of depend. Common pattern. - Make the ZSWAP suboptions and their descriptions (compression, allocation backend) a bit more straight-forward for the user. Link: https://lkml.kernel.org/r/20220510152847.230957-5-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19xen/blkfront: use xenbus_setup_ring() and xenbus_teardown_ring()Juergen Gross
Simplify blkfront's ring creation and removal via xenbus_setup_ring() and xenbus_teardown_ring(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-19xen/blkfront: switch blkfront to use INVALID_GRANT_REFJuergen Gross
Instead of using a private macro for an invalid grant reference use the common one. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-16nbd: Fix hung on disconnect request if socket is closed beforeXie Yongji
When userspace closes the socket before sending a disconnect request, the following I/O requests will be blocked in wait_for_reconnect() until dead timeout. This will cause the following disconnect request also hung on blk_mq_quiesce_queue(). That means we have no way to disconnect a nbd device if there are some I/O requests waiting for reconnecting until dead timeout. It's not expected. So let's wake up the thread waiting for reconnecting directly when a disconnect request is sent. Reported-by: Xu Jianhai <zero.xu@bytedance.com> Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220322080639.142-1-xieyongji@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-15block: remove last remaining traces of IDE documentationPaul Gortmaker
The last traces of the IDE driver went away in commit b7fb14d3ac63 ("ide: remove the legacy ide driver") but it left behind some traces of old documentation. As luck would have it Randy and I would submit similar changes within a week of each other to address this. As Randy's commit is in the doc tree already - this delta is just the stuff my removal contained that was not in Randy's IDE doc removal. Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Link: https://lore.kernel.org/all/20220427165917.GE12977@windriver.com [phil@philpotter.co.uk: removed diffs already added by others] Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20220515205833.944139-5-phil@philpotter.co.uk Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-13zram: remove double compression logicAlexey Romanov
The 2nd trial allocation under per-cpu presumption has been used to prevent regression of allocation failure. However, it makes trouble for maintenance without significant benefit. The slowpath branch is executed extremely rarely: getting there is problematic. Therefore, we delete this branch. Since b09ab054b69b ("zram: support BDI_CAP_STABLE_WRITES"), zram has used QUEUE_FLAG_STABLE_WRITES to prevent buffer change between 1st and 2nd memory allocations. Since we remove second trial memory allocation logic, we could remove the STABLE_WRITES flag because there is no change buffer to be modified under us. Link: https://lkml.kernel.org/r/20220505094443.11728-1-avromanov@sberdevices.ru Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru> Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Acked-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-08-23 12:58:35 +0000