| Age | Commit message (Collapse) | Author |
|---|
|
Add a function ublk_copy_user_integrity() to copy integrity information
between a request and a user iov_iter. This mirrors the existing
ublk_copy_user_pages() but operates on request integrity data instead of
regular data. Check UBLKSRV_IO_INTEGRITY_FLAG in iocb->ki_pos in
ublk_user_copy() to choose between copying data or integrity data.
[csander: change offset units from data bytes to integrity data bytes,
fix CONFIG_BLK_DEV_INTEGRITY=n build, rebase on user copy refactor]
Signed-off-by: Stanley Zhang <stazhang@purestorage.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__ublk_check_and_get_req() checks that the passed in offset is within
the data length of the specified ublk request. However, only user copy
(ublk_check_and_get_req()) supports accessing ublk request data at a
nonzero offset. Zero-copy buffer registration (ublk_register_io_buf())
always passes 0 for the offset, so the check is unnecessary. Move the
check from __ublk_check_and_get_req() to ublk_check_and_get_req().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_check_and_get_req() has a single callsite in ublk_user_copy(). It
takes a ton of arguments in order to pass local variables from
ublk_user_copy() to ublk_check_and_get_req() and vice versa. And more
are about to be added. Combine the functions to reduce the argument
passing noise.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_ch_read_iter() and ublk_ch_write_iter() are nearly identical except
for the iter direction. Split out a helper function ublk_user_copy() to
reduce the code duplication as these functions are about to get larger.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor a helper function ublk_copy_user_bvec() out of
ublk_copy_user_pages(). It will be used for copying integrity data too.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Indicate to the ublk server when an incoming request has integrity data
by setting UBLK_IO_F_INTEGRITY in the ublksrv_io_desc's op_flags field.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a feature flag UBLK_F_INTEGRITY for a ublk server to request
integrity/metadata support when creating a ublk device. The ublk server
can also check for the feature flag on the created device or the result
of UBLK_U_CMD_GET_FEATURES to tell if the ublk driver supports it.
UBLK_F_INTEGRITY requires UBLK_F_USER_COPY, as user copy is the only
data copy mode initially supported for integrity data.
Add UBLK_PARAM_TYPE_INTEGRITY and struct ublk_param_integrity to struct
ublk_params to specify the integrity params of a ublk device.
UBLK_PARAM_TYPE_INTEGRITY requires UBLK_F_INTEGRITY and a nonzero
metadata_size. The LBMD_PI_CAP_* and LBMD_PI_CSUM_* values from the
linux/fs.h UAPI header are used for the flags and csum_type fields.
If the UBLK_PARAM_TYPE_INTEGRITY flag is set, validate the integrity
parameters and apply them to the blk_integrity limits.
The struct ublk_param_integrity validations are based on the checks in
blk_validate_integrity_limits(). Any invalid parameters should be
rejected before being applied to struct blk_integrity.
[csander: drop redundant pi_tuple_size field, use block metadata UAPI
constants, add param validation]
Signed-off-by: Stanley Zhang <stazhang@purestorage.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_dev_support_user_copy() will be used in ublk_validate_params().
Move these functions next to ublk_{dev,queue}_is_zoned() to avoid
needing to forward-declare them.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_integrity_rq() doesn't modify the struct request passed in, so allow
a const pointer to be passed. Use a matching signature for the
!CONFIG_BLK_DEV_INTEGRITY version.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the description of the LANDLOCK_ACCESS_FS_IOCTL_DEV access right
together with the file access rights.
This group of access rights applies to files (in this case device
files), and they can be added to file or directory inodes using
landlock_add_rule(2). The check for that works the same for all file
access rights, including LANDLOCK_ACCESS_FS_IOCTL_DEV.
Invoking ioctl(2) on directory FDs can not currently be restricted
with Landlock. Having it grouped separately in the documentation is a
remnant from earlier revisions of the LANDLOCK_ACCESS_FS_IOCTL_DEV
patch set.
Link: https://lore.kernel.org/all/20260108.Thaex5ruach2@digikod.net/
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20260111175203.6545-2-gnoack3000@gmail.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
In __cxl_dpa_reserve(), it will check if the new resource range is
included in one of paritions of the cxl memory device.
cxlds->nr_paritions is used to represent how many partitions information
the cxl memory device has. In the loop, if driver cannot find a
partition including the new resource range, it will be an infinite loop.
[ dj: Removed incorrect fixes tag ]
Fixes: 991d98f17d31 ("cxl: Make cxl_dpa_alloc() DPA partition number agnostic")
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260112120526.530232-1-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Christian Brauner <brauner@kernel.org> says:
Currently pivot_root() doesn't work on the real rootfs because it
cannot be unmounted. Userspace has to do a recursive removal of the
initramfs contents manually before continuing the boot.
Really all we want from the real rootfs is to serve as the parent mount
for anything that is actually useful such as the tmpfs or ramfs for
initramfs unpacking or the rootfs itself. There's no need for the real
rootfs to actually be anything meaningful or useful. Add a immutable
rootfs called "nullfs" that can be selected via the "nullfs_rootfs"
kernel command line option.
The kernel will mount a tmpfs/ramfs on top of it, unpack the initramfs
and fire up userspace which mounts the rootfs and can then just do:
chdir(rootfs);
pivot_root(".", ".");
umount2(".", MNT_DETACH);
and be done with it. (Ofc, userspace can also choose to retain the
initramfs contents by using something like pivot_root(".", "/initramfs")
without unmounting it.)
Technically this also means that the rootfs mount in unprivileged
namespaces doesn't need to become MNT_LOCKED anymore as it's guaranteed
that the immutable rootfs remains permanently empty so there cannot be
anything revealed by unmounting the covering mount.
In the future this will also allow us to create completely empty mount
namespaces without risking to leak anything.
systemd already handles this all correctly as it tries to pivot_root()
first and falls back to MS_MOVE only when that fails.
This goes back to various discussion in previous years and a LPC 2024
presentation about this very topic.
* patches from https://patch.msgid.link/20260112-work-immutable-rootfs-v2-0-88dd1c34a204@kernel.org:
docs: mention nullfs
fs: add immutable rootfs
fs: add init_pivot_root()
fs: ensure that internal tmpfs mount gets mount id zero
Link: https://patch.msgid.link/20260112-work-immutable-rootfs-v2-0-88dd1c34a204@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a section about nullfs and how it enables pivot_root() to work.
Link: https://patch.msgid.link/20260112-work-immutable-rootfs-v2-4-88dd1c34a204@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently pivot_root() doesn't work on the real rootfs because it
cannot be unmounted. Userspace has to do a recursive removal of the
initramfs contents manually before continuing the boot.
Really all we want from the real rootfs is to serve as the parent mount
for anything that is actually useful such as the tmpfs or ramfs for
initramfs unpacking or the rootfs itself. There's no need for the real
rootfs to actually be anything meaningful or useful. Add a immutable
rootfs called "nullfs" that can be selected via the "nullfs_rootfs"
kernel command line option.
The kernel will mount a tmpfs/ramfs on top of it, unpack the initramfs
and fire up userspace which mounts the rootfs and can then just do:
chdir(rootfs);
pivot_root(".", ".");
umount2(".", MNT_DETACH);
and be done with it. (Ofc, userspace can also choose to retain the
initramfs contents by using something like pivot_root(".", "/initramfs")
without unmounting it.)
Technically this also means that the rootfs mount in unprivileged
namespaces doesn't need to become MNT_LOCKED anymore as it's guaranteed
that the immutable rootfs remains permanently empty so there cannot be
anything revealed by unmounting the covering mount.
In the future this will also allow us to create completely empty mount
namespaces without risking to leak anything.
systemd already handles this all correctly as it tries to pivot_root()
first and falls back to MS_MOVE only when that fails.
This goes back to various discussion in previous years and a LPC 2024
presentation about this very topic.
Link: https://patch.msgid.link/20260112-work-immutable-rootfs-v2-3-88dd1c34a204@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We will soon be able to pivot_root() with the introduction of the
immutable rootfs. Add a wrapper for kernel internal usage.
Link: https://patch.msgid.link/20260112-work-immutable-rootfs-v2-2-88dd1c34a204@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
and the rootfs get mount id one as it always has. Before we actually
mount the rootfs we create an internal tmpfs mount which has mount id
zero but is never exposed anywhere. Continue that "tradition".
Link: https://patch.msgid.link/20260112-work-immutable-rootfs-v2-1-88dd1c34a204@kernel.org
Fixes: 7f9bfafc5f49 ("fs: use xarray for old mount id")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Remove the arch-specific variant of paravirt_steal_clock() and use
the common one instead.
With all archs supporting Xen now having been switched to the common
variant, including paravirt.h can be dropped from drivers/xen/time.c.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260105110520.21356-12-jgross@suse.com
|
|
Remove the arch specific variant of paravirt_steal_clock() and use
the common one instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260105110520.21356-11-jgross@suse.com
|
|
Remove the arch specific variant of paravirt_steal_clock() and use
the common one instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260105110520.21356-10-jgross@suse.com
|
|
configuration and enhance error reporting
When using GNU Make's jobserver feature in kernel builds, a bug in MAKEFLAGS
propagation caused "--jobserver-auth=r,w" to reference an unintended file
descriptor. This led to infinite loops in jobserver-exec's os.read() calls
due to empty token.
My shell opened /etc/passwd for some reason without closing it, and as a
result, all child processes inherited this fd 3.
$ ls -l /proc/self/fd
total 0
lrwx------ 1 changbin changbin 64 Dec 25 13:03 0 -> /dev/pts/1
lrwx------ 1 changbin changbin 64 Dec 25 13:03 1 -> /dev/pts/1
lrwx------ 1 changbin changbin 64 Dec 25 13:03 2 -> /dev/pts/1
lr-x------ 1 changbin changbin 64 Dec 25 13:03 3 -> /etc/passwd
lr-x------ 1 changbin changbin 64 Dec 25 13:03 4 -> /proc/1421383/fd
In this case, the `make` should open a new file descriptor for jobserver
control, but clearly, it did not do so and instead still passed fd 3 as
"--jobserver-auth=3,4" in MAKEFLAGS. (The version of my gnu make is 4.3)
This update ensures robustness against invalid jobserver configurations,
even when `make` incorrectly pass non-pipe file descriptors.
* Rejecting empty reads to prevent infinite loops on EOF.
* Clearing `self.jobs` to avoid writing to incorrect files if invalid tokens
are detected.
* Printing detailed error messages to stderr to inform the user.
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260108113836.2976527-1-changbin.du@huawei.com>
|
|
Remove the arch-specific variant of paravirt_steal_clock() and use
the common one instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260105110520.21356-9-jgross@suse.com
|
|
Nothing requires it any more, make the member private.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20260108101014.579906-16-dev@lankhorst.se
|
|
Do not directly dereference xe_ggtt_node, and add
a function to retrieve the allocated GGTT size.
Reviewed-by: Matthew.brost@intel.com
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20260108101014.579906-15-dev@lankhorst.se
|
|
A careful inspection of __xe_ggtt_insert_bo_at() shows that
the ggtt_node can always be seen as inserted from xe_bo.c
due to the way error handling is performed.
The checks are also a little bit too paranoid, since we
never create a bo with ggtt_node[id] initialised but not
inserted into the GGTT, which can be seen by looking at
__xe_ggtt_insert_bo_at()
Additionally, the size of the GGTT is never bigger than 4 GB,
so adding a check at that level is incorrect.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260108101014.579906-14-dev@lankhorst.se
|
|
Start using xe_ggtt_node_addr, and avoid comparing the base offset
as vma->node is dynamically allocated.
Also sneak in a xe_bo_size() for stolen, too small to put as separate
commit.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260108101014.579906-13-dev@lankhorst.se
|
|
This function makes it possible to add an offset that is applied to
all xe_ggtt_node's, and hides the internals from all its users.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260108101014.579906-12-dev@lankhorst.se
|
|
The rotation details belong in xe_fb_pin.c, while the operations involving
GGTT belong to xe_ggtt.c. As directly locking xe_ggtt etc results in
exposing all of xe_ggtt details anyway, create a special function that
allocates a ggtt_node, and allow display to populate it using a callback
as a compromise.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20260108101014.579906-11-dev@lankhorst.se
|
|
Instead of having ggtt->size point to the end of ggtt, have ggtt->size
be the actual size of the GGTT, and introduce ggtt->start to point to
the beginning of GGTT.
This will allow a massive cleanup of GGTT in case of SRIOV-VF.
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20260108101014.579906-10-dev@lankhorst.se
|
|
In create_space_info(), the 'space_info' object is allocated at the
beginning of the function. However, there are two error paths where the
function returns an error code without freeing the allocated memory:
1. When create_space_info_sub_group() fails in zoned mode.
2. When btrfs_sysfs_add_space_info_type() fails.
In both cases, 'space_info' has not yet been added to the
fs_info->space_info list, resulting in a memory leak. Fix this by
adding an error handling label to kfree(space_info) before returning.
Fixes: 2be12ef79fe9 ("btrfs: Separate space_info create/update")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Qu reported that generic/164 often fails because the read operations get
zeroes when it expects to either get all bytes with a value of 0x61 or
0x62. The issue stems from truncating the pages from the page cache
instead of invalidating, as truncating can zero page contents. This
zeroing is not just in case the range is not page sized (as it's commented
in truncate_inode_pages_range()) but also in case we are using large
folios, they need to be split and the splitting fails. Stealing Qu's
comment in the thread linked below:
"We can have the following case:
0 4K 8K 12K 16K
| | | | |
|<---- Extent A ----->|<----- Extent B ------>|
The page size is still 4K, but the folio we got is 16K.
Then if we remap the range for [8K, 16K), then
truncate_inode_pages_range() will get the large folio 0 sized 16K,
then call truncate_inode_partial_folio().
Which later calls folio_zero_range() for the [8K, 16K) range first,
then tries to split the folio into smaller ones to properly drop them
from the cache.
But if splitting failed (e.g. racing with other operations holding the
filemap lock), the partially zeroed large folio will be kept, resulting
the range [8K, 16K) being zeroed meanwhile the folio is still a 16K
sized large one."
So instead of truncating, invalidate the page cache range with a call to
filemap_invalidate_inode(), which besides not doing any zeroing also
ensures that while it's invalidating folios, no new folios are added.
This helps ensure that buffered reads that happen while a reflink
operation is in progress always get either the whole old data (the one
before the reflink) or the whole new data, which is what generic/164
expects.
Link: https://lore.kernel.org/linux-btrfs/7fb9b44f-9680-4c22-a47f-6648cb109ddf@suse.com/
Reported-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The following new features are missing:
- Async checksum
- Shutdown ioctl and auto-degradation
- Larger block size support
Which is dependent on larger folios.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove the arch-specific variant of paravirt_steal_clock() and use
the common one instead.
This allows to remove paravirt.c and paravirt.h from arch/arm.
Until all archs supporting Xen have been switched to the common code
of paravirt_steal_clock(), drivers/xen/time.c needs to include
asm/paravirt.h for those archs, while this is not necessary for arm
any longer.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260105110520.21356-8-jgross@suse.com
|
|
Paravirt clock related functions are available in multiple archs.
In order to share the common parts, move the common static keys
to kernel/sched/ and remove them from the arch specific files.
Make a common paravirt_steal_clock() implementation available in
kernel/sched/cputime.c, guarding it with a new config option
CONFIG_HAVE_PV_STEAL_CLOCK_GEN, which can be selected by an arch
in case it wants to use that common variant.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260105110520.21356-7-jgross@suse.com
|
|
All architectures supporting CONFIG_PARAVIRT share the same contents
of asm/paravirt_api_clock.h:
#include <asm/paravirt.h>
So remove all incarnations of asm/paravirt_api_clock.h and remove the
only place where it is included, as there asm/paravirt.h is included
anyway.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com> # powerpc, scheduler bits
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260105110520.21356-6-jgross@suse.com
|
|
The macros for generating PV-thunks are part of the generic paravirt
infrastructure, so they should be in paravirt_types.h.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260105110520.21356-5-jgross@suse.com
|
|
The only effect of CONFIG_PARAVIRT_DEBUG set is that instead of doing a call
using a NULL pointer a BUG() is being raised.
While the BUG() will be a little bit easier to analyse, the call of NULL isn't
really that difficult to find the reason for.
Remove the config option to make paravirt coding a little bit less annoying.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260105110520.21356-4-jgross@suse.com
|
|
In paravirt_types.h and paravirt.h there are some struct declarations which
are not needed. Remove them.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260105110520.21356-3-jgross@suse.com
|
|
This reverts commit 8a157e0a0aa5143b5d94201508c0ca1bb8cfb941.
That commit incorrectly assumed that the bio_chain() arguments were
swapped in gfs2. However, gfs2 intentionally constructs bio chains so
that the first bio's bi_end_io callback is invoked when all bios in the
chain have completed, unlike bio chains where the last bio's callback is
invoked.
Fixes: 8a157e0a0aa5 ("gfs2: Fix use of bio_chain")
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Although the dev_xx!() macro calls do not technically require terminating
newlines for the format strings, they should be added anyway to maintain
consistency, both within Rust code and with the C versions.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Link: https://patch.msgid.link/20260107201647.2490140-2-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The NV_PFALCON_FALCON_DMATRFBASE/1 register pair supports DMA addresses
up to 49 bits only, but the write to DMATRFBASE1 could exceed that.
To mitigate, check first that the DMA address will fit.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Fixes: 69f5cd67ce41 ("gpu: nova-core: add falcon register definitions and base code")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260107201647.2490140-1-ttabi@nvidia.com
[ Import ::kernel::dma::DmaMask. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Most of the MERT code is already in dedicated file, no reason to
keep internal MERT data structure initialization elsewhere.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Lukasz Laguna <lukasz.laguna@intel.com>
Link: https://patch.msgid.link/20260109151219.26206-6-michal.wajdeczko@intel.com
|
|
There is no need to always refer to MERT data using tile pointer.
Use of local mert pointer will simplify the code and make it look
like other existing MERT function.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Lukasz Laguna <lukasz.laguna@intel.com>
Link: https://patch.msgid.link/20260109151219.26206-5-michal.wajdeczko@intel.com
|
|
There is only one MERT instance and while it is located on the root
tile, it is safer to refer to it using xe_device rather than xe_tile.
This will also allow to align signature with other MERT function.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Lukasz Laguna <lukasz.laguna@intel.com>
Link: https://patch.msgid.link/20260111213847.27869-1-michal.wajdeczko@intel.com
|
|
Add simple top level kernel-doc for the struct itself to allow the
script recognize that and fix tag of the one member.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Lukasz Laguna <lukasz.laguna@intel.com>
Link: https://patch.msgid.link/20260109151219.26206-3-michal.wajdeczko@intel.com
|
|
Most of our header files are using include guard names with single
underscore and we don't use trailing comments on final #endif.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Lukasz Laguna <lukasz.laguna@intel.com>
Link: https://patch.msgid.link/20260109151219.26206-2-michal.wajdeczko@intel.com
|
|
Add the UHS state pins for the MMC1 and MMC2 controllers and,
while at it, also add the correct drive strength parameters
for the default pin states for those two.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Remove the clock-stretch-ns property from i2c2, as it has always
been (and still is) unused.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The only reason to have a regulator in the thermal node is to keep
the CPU cores up while reading temperatures, but this is incorrect
because the AUXADC Thermal IP doesn't need any regulators to work,
at all.
Since the thermal node was inherited only for adding vregs, remove
it entirely.
This change is safe also because, among other things, the actual
driver never used those regulators anyway.
This also fixes a dtbs_check warning.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Since only a single port is present, remove the inner `ports`
parent node and just declare the single port as `port`.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Change the node name for Marvell SD8897 SDIO Bluetooth from
`btmrvl@2` to `bluetooth@2` to fix a dtbs_check warning.
While at it, also change the WiFi one from `mwifiex@1" to a
generic "wifi@1" and reorder the nodes so that wifi@1 comes
before bluetooth@2.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
