| Age | Commit message (Collapse) | Author |
|---|
|
In case of long name don't reread what we'd already copied.
memmove() it instead. That avoids the possibility of ending
up with empty name there and the need to look at the flags
on the slow path.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... so don't use __getname() there. Switch it (and ntfs_d_hash(), while
we are at it) to kmalloc(PATH_MAX, GFP_NOWAIT). Yes, ntfs_d_hash()
almost certainly can do with smaller allocations, but let ntfs folks
deal with that - keep the allocation size as-is for now.
Stop abusing names_cachep in ntfs, period - various uses of that thing
in there have nothing to do with pathnames; just use k[mz]alloc() and
be done with that. For now let's keep sizes as-in, but AFAICS none of
the users actually want PATH_MAX.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Originally we tried to avoid multiple insertions into audit names array
during retry loop by a cute hack - memorize the userland pointer and
if there already is a match, just grab an extra reference to it.
Cute as it had been, it had problems - two identical pointers had
audit aux entries merged, two identical strings did not. Having
different behaviour for syscalls that differ only by addresses of
otherwise identical string arguments is obviously wrong - if nothing
else, compiler can decide to merge identical string literals.
Besides, this hack does nothing for non-audited processes - they get
a fresh copy for retry. It's not time-critical, but having behaviour
subtly differ that way is bogus.
These days we have very few places that import filename more than once
(9 functions total) and it's easy to massage them so we get rid of all
re-imports. With that done, we don't need audit_reusename() anymore.
There's no need to memorize userland pointer either.
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Take getname_flags() and putname() outside of retry loop.
Since getname_flags() is the only thing that cares about LOOKUP_EMPTY,
don't bother with setting LOOKUP_EMPTY in lookup_flags - just pass it
to getname_flags() and be done with that.
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Convert the user_path_at() call inside a retry loop into getname_flags() +
filename_lookup() + putname() and leave only filename_lookup() inside
the loop.
In this case we never pass LOOKUP_EMPTY, so getname_flags() is equivalent
to plain getname().
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Convert the user_path_at() call inside a retry loop into getname_flags() +
filename_lookup() + putname() and leave only filename_lookup() inside
the loop.
In this case we never pass LOOKUP_EMPTY, so getname_flags() is equivalent
to plain getname().
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Convert the user_path_at() call inside a retry loop into getname_flags() +
filename_lookup() + putname() and leave only filename_lookup() inside
the loop.
In this case we never pass LOOKUP_EMPTY, so getname_flags() is equivalent
to plain getname().
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Convert the user_path_at() call inside a retry loop into getname_flags() +
filename_lookup() + putname() and leave only filename_lookup() inside
the loop.
In this case we never pass LOOKUP_EMPTY, so getname_flags() is equivalent
to plain getname().
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Convert the user_path_at() call inside a retry loop into getname_flags() +
filename_lookup() + putname() and leave only filename_lookup() inside
the loop.
Since we have the default logics for use of LOOKUP_EMPTY (passed iff
AT_EMPTY_PATH is present in flags), just use getname_uflags() and
don't bother with setting LOOKUP_EMPTY in lookup_flags - getname_uflags()
will pass the right thing to getname_flags() and filename_lookup()
doesn't care about LOOKUP_EMPTY at all.
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Convert the user_path_at() call inside a retry loop into getname_flags() +
filename_lookup() + putname() and leave only filename_lookup() inside
the loop.
Since we have the default logics for use of LOOKUP_EMPTY (passed iff
AT_EMPTY_PATH is present in flags), just use getname_uflags() and
don't bother with setting LOOKUP_EMPTY in lookup_flags - getname_uflags()
will pass the right thing to getname_flags() and filename_lookup()
doesn't care about LOOKUP_EMPTY at all.
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Convert the user_path_at() call inside a retry loop into getname_flags() +
filename_lookup() + putname() and leave only filename_lookup() inside
the loop.
Since we have the default logics for use of LOOKUP_EMPTY (passed iff
AT_EMPTY_PATH is present in flags), just use getname_uflags() and
don't bother with setting LOOKUP_EMPTY in lookup_flags - getname_uflags()
will pass the right thing to getname_flags() and filename_lookup()
doesn't care about LOOKUP_EMPTY at all.
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Convert the user_path_at() call inside a retry loop into getname_flags() +
filename_lookup() + putname() and leave only filename_lookup() inside
the loop.
Since we have the default logics for use of LOOKUP_EMPTY (passed iff
AT_EMPTY_PATH is present in flags), just use getname_uflags() and
don't bother with setting LOOKUP_EMPTY in lookup_flags - getname_uflags()
will pass the right thing to getname_flags() and filename_lookup()
doesn't care about LOOKUP_EMPTY at all.
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Not all users match that model, but most of them do. By the end of
the series we'll be left with very few irregular ones...
Added:
CLASS(filename, name)(user_path) =>
getname(user_path)
CLASS(filename_kernel, name)(string) =>
getname_kernel(string)
CLASS(filename_flags, name)(user_path, flags) =>
getname_flags(user_path, flags)
CLASS(filename_uflags, name)(user_path, flags) =>
getname_uflags(user_path, flags)
CLASS(filename_maybe_null, name)(user_path, flags) =>
getname_maybe_null(user_path, flags)
all with putname() as destructor.
"flags" in filename_flags is in LOOKUP_... space, only LOOKUP_EMPTY matters.
"flags" in filename_uflags and filename_maybe_null is in AT_...... space,
and only AT_EMPTY_PATH matters.
filename_flags conventions might be worth reconsidering later (it might or
might not be better off with boolean instead)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Same as init_unlink() and init_rmdir() already are; the only obstacle
is do_mknodat() being static.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The docs for YNL event ops currently render raw python structs. For
example in:
https://docs.kernel.org/netlink/specs/ethtool.html#cable-test-ntf
event: {‘attributes’: [‘header’, ‘status’, ‘nest’], ‘__lineno__’: 2385}
Handle event ops correctly and render their op attributes:
event: attributes: [header, status]
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260112153436.75495-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test occasionally fails due to exceeding timing bounds, as
run in continuous testing on netdev.bots:
https://netdev.bots.linux.dev/contest.html?test=txtimestamp-sh
A common pattern is a single elevated delay between USR and SND.
# 8.36 [+0.00] test SND
# 8.36 [+0.00] USR: 1767864384 s 240994 us (seq=0, len=0)
# 8.44 [+0.08] ERROR: 18461 us expected between 10000 and 18000
# 8.44 [+0.00] SND: 1767864384 s 259455 us (seq=42, len=10) (USR +18460 us)
# 8.52 [+0.07] SND: 1767864384 s 339523 us (seq=42, len=10) (USR +10005 us)
# 8.52 [+0.00] USR: 1767864384 s 409580 us (seq=0, len=0)
# 8.60 [+0.08] SND: 1767864384 s 419586 us (seq=42, len=10) (USR +10005 us)
# 8.60 [+0.00] USR: 1767864384 s 489645 us (seq=0, len=0)
# 8.68 [+0.08] SND: 1767864384 s 499651 us (seq=42, len=10) (USR +10005 us)
# 8.68 [+0.00] USR-SND: count=4, avg=12119 us, min=10005 us, max=18460 us
(Note that other delays are nowhere near the large 8ms tolerance.)
One hypothesis is that the task is descheduled between taking the USR
timestamp and sending the packet. Possibly in printing.
Delay taking the timestamp closer to sendmsg, and delay printing until
after sendmsg.
With this change, failure rate is significantly lower in current runs.
Link: https://lore.kernel.org/netdev/20260107110521.1aab55e9@kernel.org/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260112163355.3510150-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sev_gmem_post_populate() needs to unmap the target vaddr after
copy_from_user() to the vaddr fails.
Fixes: dee5a47cc7a4 ("KVM: SEV: Add KVM_SEV_SNP_LAUNCH_UPDATE command")
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Link: https://patch.msgid.link/20260108214622.1084057-2-michael.roth@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The previous 7 KB per queue caused TX unit hangs under heavy
timestamping load. Reducing to 5 KB avoids these hangs and matches
the TSN recommendation in I225/I226 SW User Manual Section 7.5.4.
The 8 KB "freed" by this change is currently unused. This reduction
is not expected to impact throughput, as the i226 is PCIe-limited
for small TSN packets rather than TX-buffer-limited.
Fixes: 0d58cdc902da ("igc: optimize TX packet buffer utilization for TSN mode")
Reported-by: Zdenek Bouska <zdenek.bouska@siemens.com>
Closes: https://lore.kernel.org/netdev/AS1PR10MB5675DBFE7CE5F2A9336ABFA4EBEAA@AS1PR10MB5675.EURPRD10.PROD.OUTLOOK.COM/
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The current HW bug workaround checks the TXTT_0 ready bit first,
then reads TXSTMPL_0 twice (before and after reading TXSTMPH_0)
to detect whether a new timestamp was captured by timestamp
register 0 during the workaround.
This sequence has a race: if a new timestamp is captured after
checking the TXTT_0 bit but before the first TXSTMPL_0 read, the
detection fails because both the "old" and "new" values come from
the same timestamp.
Fix by reading TXSTMPL_0 first to establish a baseline, then
checking the TXTT_0 bit. This ensures any timestamp captured
during the race window will be detected.
Old sequence:
1. Check TXTT_0 ready bit
2. Read TXSTMPL_0 (baseline)
3. Read TXSTMPH_0 (interrupt workaround)
4. Read TXSTMPL_0 (detect changes vs baseline)
New sequence:
1. Read TXSTMPL_0 (baseline)
2. Check TXTT_0 ready bit
3. Read TXSTMPH_0 (interrupt workaround)
4. Read TXSTMPL_0 (detect changes vs baseline)
Fixes: c789ad7cbebc ("igc: Work around HW bug causing missing timestamps")
Suggested-by: Avi Shalev <avi.shalev@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The Multi-queue Priority (MQPRIO) and Earliest TxTime First (ETF) offloads
utilize the Time Sensitive Networking (TSN) Tx mode. This mode is always
coupled to IEEE 802.1Qbv time aware shaper (Qbv). Therefore, the driver
sets a default Qbv schedule of all gates opened and a cycle time of
1s. This schedule is set during probe.
However, the following sequence of events lead to Tx issues:
- Boot a dual core system
igc_probe():
igc_tsn_clear_schedule():
-> Default Schedule is set
Note: At this point the driver has allocated two Tx/Rx queues, because
there are only two CPUs.
- ethtool -L enp3s0 combined 4
igc_ethtool_set_channels():
igc_reinit_queues()
-> Default schedule is gone, per Tx ring start and end time are zero
- tc qdisc replace dev enp3s0 handle 100 parent root mqprio \
num_tc 4 map 3 3 2 2 0 1 1 1 3 3 3 3 3 3 3 3 \
queues 1@0 1@1 1@2 1@3 hw 1
igc_tsn_offload_apply():
igc_tsn_enable_offload():
-> Writes zeros to IGC_STQT(i) and IGC_ENDQT(i), causing Tx to stall/fail
Therefore, restore the default Qbv schedule after changing the number of
channels.
Furthermore, add a restriction to not allow queue reconfiguration when
TSN/Qbv is enabled, because it may lead to inconsistent states.
Fixes: c814a2d2d48f ("igc: Use default cycle 'start' and 'end' values for queues")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The commit 5f6df173f92e ("ice: implement and use rd32_poll_timeout for
ice_sq_done timeout") converted ICE_CTL_Q_SQ_CMD_TIMEOUT from jiffies
to microseconds.
But the ice_release_res() function was missed, and its logic still
treats ICE_CTL_Q_SQ_CMD_TIMEOUT as a jiffies value.
So correct the issue by usecs_to_jiffies().
Found by inspection of the DDP downloading process.
Compile and modprobe tested only.
Fixes: 5f6df173f92e ("ice: implement and use rd32_poll_timeout for ice_sq_done timeout")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When the user issues an administrative down to an interface that is the
primary for an aggregate bond, the prune lists are being purged. This
breaks communication to the secondary interface, which shares a prune
list on the main switch block while bonded together.
For the primary interface of an aggregate, avoid deleting these prune
lists during stop, and since they are hardcoded to specific values for
the default vlan and QinQ vlans, the attempt to re-add them during the
up phase will quietly fail without any additional problem.
Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The u64_stats_sync structure is empty on 64-bit systems. However, on 32-bit
systems it contains a seqcount_t which needs to be initialized. While the
memory is zero-initialized, a lack of u64_stats_init means that lockdep
won't get initialized properly. Fix this by adding u64_stats_init() calls
to the rings just after allocation.
Fixes: 2b245cb29421 ("ice: Implement transmit and NAPI support")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
err is duplicated with errno, and never used; remove it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Shi <alexs@kernel.org>
Link: https://patch.msgid.link/20260107064009.15380-1-alexs@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
It can be used when we want to add virtio devices to UML while
it's up and running. Virtio devices can be added to UML using
the same syntax as the command line option:
(mconsole) config virtio_uml.device=<socket>:<virtio_id>[:<platform_id>]
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20260106004259.1604736-1-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In seccomp mode, SIGCHLD serves as the child reaper IRQ. So, let's
handle it in the same way as other IRQ signals, including preventing
them from nesting with each other and allowing interrupted syscalls
to be automatically restarted.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20260106001228.1531146-3-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We rely on errno to determine whether a syscall has failed, so we
need to ensure that accessing errno is async-signal-safe. Currently,
we preserve the errno in sig_handler_common(), but it doesn't cover
every possible case. Let's do it in hard_handler() instead, which
is the signal handler we actually register.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20260106001228.1531146-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Most Qualcomm platforms feature Gunyah hypervisor, which typically
handles IOMMU configuration. This includes mapping memory regions and
device memory resources for remote processors by intercepting
qcom_scm_pas_auth_and_reset() calls. These mappings are later removed
during teardown. Additionally, SHM bridge setup is required to enable
memory protection for both remoteproc metadata and its memory regions.
When the aforementioned hypervisor is absent, the operating system must
perform these configurations instead.
When Linux runs as the hypervisor (@ EL2) on a SoC, it will have its
own device tree overlay file that specifies the firmware stream ID now
managed by Linux for a particular remote processor. If the iommus
property is specified in the remoteproc device tree node, it indicates
that IOMMU configuration must be handled by Linux. In this case, the
has_iommu flag is set for the remote processor, which ensures that the
resource table, carveouts, and SHM bridge are properly configured before
memory is passed to TrustZone for authentication. Otherwise, the
has_iommu flag remains unset, which indicates default behavior.
Enables Secure PAS support for remote processors when IOMMU configuration
is managed by Linux.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-13-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Qualcomm remote processor may rely on static and dynamic resources for
it to be functional. For most of the Qualcomm SoCs, when run with Gunyah
or older QHEE hypervisor, all the resources whether it is static or
dynamic, is managed by the hypervisor. Dynamic resources if it is
present for a remote processor will always be coming from secure world
via SMC call while static resources may be present in remote processor
firmware binary or it may be coming from SMC call along with dynamic
resources.
Remoteproc already has method like rproc_elf_load_rsc_table() to check
firmware binary has resources or not and if it is not having then we
pass NULL and zero as input resource table and its size argument
respectively to qcom_scm_pas_get_rsc_table() and while it has resource
present then it should pass the present resources to Trustzone(TZ) so that
it could authenticate the present resources and append dynamic resource
to return in output_rt argument along with authenticated resources.
Extend parse_fw callback to include SMC call to get resources from
Trustzone and to leverage resource table parsing and mapping and
unmapping code from the remoteproc framework.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-12-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Qualcomm remote processor may rely on Static and Dynamic resources for
it to be functional. Static resources are fixed like for example,
memory-mapped addresses required by the subsystem and dynamic
resources, such as shared memory in DDR etc., are determined at
runtime during the boot process.
For most of the Qualcomm SoCs, when run with Gunyah or older QHEE
hypervisor, all the resources whether it is static or dynamic, is
managed by the hypervisor. Dynamic resources if it is present for a
remote processor will always be coming from secure world via SMC call
while static resources may be present in remote processor firmware
binary or it may be coming qcom_scm_pas_get_rsc_table() SMC call along
with dynamic resources.
Some of the remote processor drivers, such as video, GPU, IPA, etc., do
not check whether resources are present in their remote processor
firmware binary. In such cases, the caller of this function should set
input_rt and input_rt_size as NULL and zero respectively. Remoteproc
framework has method to check whether firmware binary contain resources
or not and they should be pass resource table pointer to input_rt and
resource table size to input_rt_size and this will be forwarded to
TrustZone for authentication. TrustZone will then append the dynamic
resources and return the complete resource table in the passed output
buffer.
More about documentation on resource table format can be found in
include/linux/remoteproc.h
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-11-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On SoCs running with a non-Gunyah-based hypervisor, Linux must take
responsibility for creating the SHM bridge both for metadata (before
calling qcom_scm_pas_init_image()) and for remoteproc memory (before
calling qcom_scm_pas_auth_and_reset()). We have taken care the things
required for qcom_scm_pas_auth_and_reset(). Lets put these awareness
of above conditions into qcom_scm_pas_init_image() and
qcom_scm_pas_metadata_release().
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-10-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Refactor qcom_scm_pas_init_image() by moving the memory allocation,
copy, and free operations to a higher-level function, and isolate the
actual SMC call in a separate function. The main intention is to allow
flexibility for different allocators and to respect any constraints that
the allocator API may impose before invoking the actual SCM function.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-9-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For memory passed to TrustZone (TZ), it must either be part of a pool
registered with TZ or explicitly registered via SHMbridge SMC calls.
When Gunyah hypervisor is present, PAS SMC calls from Linux running at
EL1 are trapped by Gunyah running @ EL2, which handles SHMbridge
creation for both metadata and remoteproc carveout memory before
invoking the calls to TZ.
On SoCs running with a non-Gunyah-based hypervisor, Linux must take
responsibility for creating the SHM bridge before invoking PAS SMC
calls. For the auth_and_reset() call, the remoteproc carveout memory
must first be registered with TZ via a SHMbridge SMC call and once
authentication and reset are complete, the SHMbridge memory can be
deregistered.
Introduce qcom_scm_pas_prepare_and_auth_reset(), which sets up the SHM
bridge over the remoteproc carveout memory when Linux operates at EL2.
This behavior is indicated by a new field added to the PAS context data
structure. The function then invokes the auth_and_reset SMC call.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-8-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
qcom_mdt_pas_init() was previously used only by the remoteproc driver
(drivers/remoteproc/qcom_q6v5_pas.c). Since that driver has now
transitioned to using PAS context-based qcom_mdt_pas_load() function,
making qcom_mdt_pas_init() obsolete for external use.
Removes qcom_mdt_pas_init() from the list of exported symbols and make
it static to limit its scope to internal use within mdtloader.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-7-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Introduce a new PAS context-aware function, qcom_mdt_pas_load(), for
remote processor drivers. This function utilizes the PAS context
pointer returned from qcom_scm_pas_ctx_init() to perform firmware
metadata verification and memory setup via SMC calls.
The qcom_mdt_pas_load() and qcom_mdt_load() functions are largely
similar, but the former is designed for clients using the PAS
context-based data structure. Over time, all users of qcom_mdt_load()
can be migrated to use qcom_mdt_pas_load() for consistency and
improved abstraction.
As the remoteproc PAS driver (qcom_q6v5_pas) has already adopted the
PAS context-based approach, update it to use qcom_mdt_pas_load().
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-6-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
As a superset of the existing metadata context, the PAS context
structure enables both remoteproc and non-remoteproc subsystems to
better support scenarios where the SoC runs with or without the Gunyah
hypervisor. To reflect this, relevant SCM and metadata functions are
updated to incorporate PAS context awareness and remove metadata context
data structure completely.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-5-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When the Peripheral Authentication Service (PAS) method runs on a SoC
where Linux operates at EL2 (i.e., without the Gunyah hypervisor), the
reset sequences are handled by TrustZone. In such cases, Linux must
perform additional steps before invoking PAS SMC calls, such as creating
a SHM bridge. Therefore, PAS SMC calls require awareness and handling of
these additional steps when Linux runs at EL2.
To support this, there is a need for a data structure that can be
initialized prior to invoking any SMC or MDT functions. This structure
allows those functions to determine whether they are operating in the
presence or absence of the Gunyah hypervisor and behave accordingly.
Currently, remoteproc and non-remoteproc subsystems use different
variants of the MDT loader helper API, primarily due to differences in
metadata context handling. Remoteproc subsystems retain the metadata
context until authentication and reset are completed, while
non-remoteproc subsystems (e.g., video, graphics, IPA, etc.) do not
retain the metadata context and can free it within the
qcom_scm_pas_init() call by passing a NULL context parameter and due to
these differences, it is not possible to extend metadata context
handling to support remoteproc and non remoteproc subsystem use PAS
operations, when Linux operates at EL2.
Add PAS context data structure allocator helper function.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-4-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Peripheral and pas_id refers to unique id for a subsystem and used only
when peripheral authentication service from secure world is utilized.
Lets rename peripheral to pas_id to reflect closer to its meaning.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-3-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The qcom_scm_pas_metadata_release() function already frees the allocated
memory and sets ctx->ptr to NULL. Resetting ctx->phys and ctx->size to
zero is unnecessary because the context is expected to be discarded
after release.
Lets removes redundant assignments.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-2-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On most Qualcomm platforms, the Qualcomm Hypervisor Execution
Environment (QHEE) is either used as a standalone hypervisor or
co-exists as a module with the Gunyah hypervisor. When QHEE is
present, it configures firmware streams for remote processors.
If QHEE is not available, the operating system must perform
these configurations instead and for that remote processor
firmware stream should be presented to the operating system.
To support this, add the iommus property as an optional property
for PAS-supported devices.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-1-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Unlike the CPU, the GPU does not throttle its speed automatically when it
reaches high temperatures.
Set up GPU cooling by throttling the GPU speed
when reaching 115°C.
Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250903-a623-gpu-support-v5-4-5398585e2981@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 revert from Andreas Gruenbacher:
"Revert bad commit "gfs2: Fix use of bio_chain"
I was originally assuming that there must be a bug in gfs2
because gfs2 chains bios in the opposite direction of what
bio_chain_and_submit() expects.
It turns out that the bio chains are set up in "reverse direction"
intentionally so that the first bio's bi_end_io callback is invoked
rather than the last bio's callback.
We want the first bio's callback invoked for the following reason: The
initial bio starts page aligned and covers one or more pages. When it
terminates at a non-page-aligned offset, subsequent bios are added to
handle the remaining portion of the final page.
Upon completion of the bio chain, all affected pages need to be be
marked as read, and only the first bio references all of these pages"
* tag 'gfs2-for-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
Revert "gfs2: Fix use of bio_chain"
|
|
The func_id parameter is not needed in check_func_proto.
This patch removes it.
Signed-off-by: Song Chen <chensong_2000@189.cn>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260105155009.4581-1-chensong_2000@189.cn
|
|
Pull x86 kvm fixes from Paolo Bonzini:
- Avoid freeing stack-allocated node in kvm_async_pf_queue_task
- Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: kvm: Verify TILELOADD actually #NM faults when XFD[18]=1
selftests: kvm: try getting XFD and XSAVE state out of sync
selftests: kvm: replace numbered sync points with actions
x86/fpu: Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1
x86/kvm: Avoid freeing stack-allocated node in kvm_async_pf_queue_task
|
|
ASPEED BMC controllers have VGA and USB functions behind a PCIe-to-PCI
bridge that causes them to share the same StreamID:
[e0]---00.0-[e1-e2]----00.0-[e2]--+-00.0 ASPEED Graphics Family
\-02.0 ASPEED USB Controller
Both devices get StreamID 0x5e200 due to bridge aliasing, causing the USB
controller to be rejected with 'Aliasing StreamID unsupported'.
Per ASPEED, the AST1150 doesn't use a real PCI bus and always forwards
the original Requester ID from downstream devices rather than replacing
it with any alias.
Add a new PCI_DEV_FLAGS_PCI_BRIDGE_NO_ALIAS flag and apply it to the
AST1150.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nirmoy Das <nirmoyd@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://patch.msgid.link/20251217154529.377586-2-nirmoyd@nvidia.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Minor fixes and cleanups for the MSHV driver
* tag 'hyperv-fixes-signed-20260112' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: release mutex on region invalidation failure
hyperv: Avoid -Wflex-array-member-not-at-end warning
mshv: hide x86-specific functions on arm64
mshv: Initialize local variables early upon region invalidation
mshv: Use PMD_ORDER instead of HPAGE_PMD_ORDER when processing regions
|
|
Use defined constant to avoid the possible mistakes and to provide
an additional information on the units.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260112134900.4142954-8-andriy.shevchenko@linux.intel.com
|
