| Age | Commit message (Collapse) | Author |
|---|
|
- introduce the notion of a data offset for ceph_x_encrypt_offset()
to allow for e.g. confounder to be prepended before the encryption
header in the future. For CEPH_CRYPTO_AES, the data offset is 0
(i.e. nothing is prepended).
- adjust ceph_x_encrypt_buflen() accordingly and make it account for
PKCS#7 padding that is used by CEPH_CRYPTO_AES precisely instead of
just always adding 16.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When decoding the key, verify that the key material would fit into
a fixed-size buffer in process_auth_done() and generally has a sane
length.
The new CEPH_MAX_KEY_LEN check replaces the existing check for a key
with no key material which is a) not universal since CEPH_CRYPTO_NONE
has to be excluded and b) doesn't provide much value since a smaller
than needed key is just as invalid as no key -- this has to be handled
elsewhere anyway.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Add fall-through to fix the warning in ntfs_fs_parse_param().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602041402.uojBz5QY-lkp@intel.com/
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
In case getting VDDIO regulator returned an error, WCN power sequencing
driver passes ret to dev_err_probe() as the error code, however it is
known that ret is 0 at this point. Pass PTR_ERR(ctx->vddio) instead.
Fixes: 0eb85f468ef5 ("power: sequencing: qcom-wcn: add support for WCN39xx")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/aYXvQxKqmjP_sdCd@stanley.mountain/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260207-fix-wcn39xx-v1-1-df0606108ce2@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=001f, idProduct=0b21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB13X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210926172016
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Link: https://patch.msgid.link/TYUPR06MB6217522D0DB6E2C9DF46B56ED265A@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Enable p2pdma on the mlx5 PCI device to allow DMABUF-based peer-to-peer
DMA mappings.
Add implementation of the mmap_get_pfns and pgoff_to_mmap_entry device
operations required for DMABUF support in the mlx5 RDMA driver.
The pgoff_to_mmap_entry operation converts a page offset to the
corresponding rdma_user_mmap_entry by extracting the command and index
from the offset and looking it up in the ucontext's mmap_xa.
The mmap_get_pfns operation retrieves the physical address and length
from the mmap entry and obtains the p2pdma provider for the underlying
PCI device, which is needed for peer-to-peer DMA operations with
DMABUFs.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260201-dmabuf-export-v3-3-da238b614fe3@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Expose DMABUF functionality to userspace through the uverbs interface,
enabling InfiniBand/RDMA devices to export PCI based memory regions
(e.g. device memory) as DMABUF file descriptors. This allows
zero-copy sharing of RDMA memory with other subsystems that support the
dma-buf framework.
A new UVERBS_OBJECT_DMABUF object type and allocation method were
introduced.
During allocation, uverbs invokes the driver to supply the
rdma_user_mmap_entry associated with the given page offset (pgoff).
Based on the returned rdma_user_mmap_entry, uverbs requests the driver
to provide the corresponding physical-memory details as well as the
driver’s PCI provider information.
Using this information, dma_buf_export() is called; if it succeeds,
uobj->object is set to the underlying file pointer returned by the
dma-buf framework.
The file descriptor number follows the standard uverbs allocation flow,
but the file pointer comes from the dma-buf subsystem, including its own
fops and private data.
When an mmap entry is removed, uverbs iterates over its associated
DMABUFs, marks them as revoked, and calls dma_buf_move_notify() so that
their importers are notified.
The same procedure applies during the disassociate flow; final cleanup
occurs when the application closes the file.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260201-dmabuf-export-v3-2-da238b614fe3@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add support for uobjects that wrap externally allocated file
descriptors (FDs).
In this mode, the FD number still follows the standard uverbs allocation
flow, but the file pointer is allocated externally and has its own fops
and private data.
As a result, alloc_begin_fd_uobject() must handle cases where
fd_type->fops is NULL, and both alloc_commit_fd_uobject() and
alloc_abort_fd_uobject() must account for whether filp->private_data
exists, since it is populated outside the standard uverbs flow.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260201-dmabuf-export-v3-1-da238b614fe3@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
* Reuse common phys_vec, phase out dma_buf_phys_vec
Signed-off-by: Alex Williamson <alex@shazbot.org>
* tag 'common_phys_vec_via_vfio':
types: reuse common phys_vec type instead of DMABUF open‑coded variant
types: move phys_vec definition to common header
nvme-pci: Use size_t for length fields to handle larger sizes
|
|
This will allow it to be included multiple times without problems,
that's needed for the smbdirect move to common code.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the corresponding
structure. Notice that struct smb2_file_all_info is a flexible
structure, this is a structure that contains a flexible-array
member.
Fix the following warnings:
12 fs/smb/client/cached_dir.h:51:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
These array elements have already been defined.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When an NT error code is not in ntstatus_to_dos_map, ntstatus_to_dos()
will return the default ERRHRD and ERRGENERAL.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See MS-ERREf 2.3.1 STATUS_VOLUME_NOT_UPGRADED.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See MS-ERREf 2.3.1 STATUS_NO_USER_KEYS.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See MS-ERREf 2.3.1 STATUS_WRONG_EFS.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See MS-ERREf 2.3.1 STATUS_NO_EFS.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See MS-ERREf 2.3.1 STATUS_NO_RECOVERY_POLICY.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See MS-ERREf 2.3.1 STATUS_RANGE_NOT_FOUND.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See MS-ERREf 2.3.1 STATUS_DECRYPTION_FAILED.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See MS-ERREf 2.3.1 STATUS_ENCRYPTION_FAILED.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See MS-ERREf 2.3.1 STATUS_DIRECTORY_IS_A_REPARSE_POINT.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See MS-ERREf 2.3.1 STATUS_VOLUME_DISMOUNTED.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See MS-ERREf 2.3.1 STATUS_BIOS_FAILED_TO_CONNECT_INTERRUPT.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See MS-ERREf 2.3.1 STATUS_VARIABLE_NOT_FOUND.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See MS-CIFS 2.2.2.4 ERRunknownlevel. Keep the name consistent with the
documentation.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See MS-CIFS 2.2.2.4 STATUS_OS2_INVALID_LEVEL.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See MS-CIFS 2.2.2.4 STATUS_INVALID_INFO_CLASS.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The KUnit test are executed when cifs.ko is loaded.
Just like `fs/ext4/mballoc.c` includes `fs/ext4/mballoc-test.c`.
`smb2maperror.c` also includes `smb2maperror_test.c`, allowing KUnit
tests to access any functions and variables in `smb2maperror.c`.
The maperror_test_check_search() checks whether all elements can be
correctly found in the array.
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The smb2_error_map_table array currently has 1740 elements. When searching
for the last element, the original loop-based search method requires 1740
comparisons, while binary search algorithm requires only 10 comparisons.
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/linux-cifs/20260106071507.1420900-5-chenxiaosong.chenxiaosong@linux.dev/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Although the array is sorted at build time, verify the ordering again
when cifs.ko is loaded to avoid potential regressions introduced by
future script changes.
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/linux-cifs/20260106071507.1420900-4-chenxiaosong.chenxiaosong@linux.dev/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Autogenerate the SMB2 status to error code mapping table, from the
smb2status.h common header, sorting it by NT status code so that it can be
searched by binary chopping. This also reduces the number of places this
list is duplicated in the source.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <stfrench@microsoft.com>
cc: ChenXiaoSong <chenxiaosong@kylinos.cn>
cc: linux-cifs@vger.kernel.org
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/linux-cifs/20260106071507.1420900-3-chenxiaosong.chenxiaosong@linux.dev/
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We should make it clear that we use this strange value
instead of hiding it in same code flow.
Note this value is mainly ignored currently,
as we do the calculation again with
the negotiated max_recv_size in smb_direct_prepare().
So this is only a cosmetic change in order to
avoid confusion.
In future we may change the logic and
adjust the number of recv buffers instead
of the max_fragmented_recv_size.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When we download a file without rdma offload or get
a large directly enumeration from the server,
the server might want to send up to smbd_max_fragmented_recv_size
bytes, but if it is too large all our recv buffers
might already be moved to the recv_io.reassembly.list
and we're no longer able to grant recv credits.
The maximum fragmented upper-layer payload receive size supported
Assume max_payload_per_credit is
smbd_max_receive_size - 24 = 1340
The maximum number would be
smbd_receive_credit_max * max_payload_per_credit
1340 * 255 = 341700 (0x536C4)
The minimum value from the spec is 131072 (0x20000)
For now we use the logic we used in ksmbd before:
(1364 * 255) / 2 = 173910 (0x2A756)
Fixes: 03bee01d6215 ("CIFS: SMBD: Add SMB Direct protocol initial values and constants")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
On kthread_run() failure in ksmbd_tcp_new_connection(), the transport is
freed via free_transport(), which does not decrement active_num_conn,
leaking this counter.
Replace free_transport() with ksmbd_tcp_disconnect().
Fixes: 0d0d4680db22e ("ksmbd: add max connections parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This patch introduces a /proc filesystem interface to ksmbd, providing
visibility into the internal state of the SMB server. This allows
administrators and developers to monitor active connections, user
sessions, and opened files in real-time without relying on external
tools or heavy debugging.
Key changes include:
- Connection Monitoring (/proc/fs/ksmbd/clients): Displays a list of
active network connections, including client IP addresses, SMB dialects,
credits, and last active timestamps.
- Session Management (/proc/fs/ksmbd/sessions/): Adds a global sessions
file to list all authenticated users and their session IDs.
- Creates individual session entries (e.g., /proc/fs/ksmbd/sessions/<id>)
detailing capabilities (DFS, Multi-channel, etc.), signing/encryption
algorithms, and connected tree shares.
- File Tracking (/proc/fs/ksmbd/files): Shows all currently opened files
across the server, including tree IDs, process IDs (PID), access modes
(daccess/saccess), and oplock/lease states.
- Statistics & Counters: Implements internal counters for global server
metrics, such as the number of tree connections, total sessions, and
processed read/write bytes.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Bahubali B Gumaji <bahubali.bg@samsung.com>
Signed-off-by: Sang-Soo Lee <constant.lee@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The problem occurs when a signed request fails smb2 signature verification
check. In __process_request(), if check_sign_req() returns an error,
set_smb2_rsp_status(work, STATUS_ACCESS_DENIED) is called.
set_smb2_rsp_status() set work->next_smb2_rcv_hdr_off as zero. By resetting
next_smb2_rcv_hdr_off to zero, the pointer to the next command in the chain
is lost. Consequently, is_chained_smb2_message() continues to point to
the same request header instead of advancing. If the header's NextCommand
field is non-zero, the function returns true, causing __handle_ksmbd_work()
to repeatedly process the same failed request in an infinite loop.
This results in the kernel log being flooded with "bad smb2 signature"
messages and high CPU usage.
This patch fixes the issue by changing the return value from
SERVER_HANDLER_CONTINUE to SERVER_HANDLER_ABORT. This ensures that
the processing loop terminates immediately rather than attempting to
continue from an invalidated offset.
Reported-by: tianshuo han <hantianshuo233@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The latency tracers (scheduler, irqsoff, etc) were created when tracing
was first added. These tracers required a "snapshot" buffer that was the
same size as the ring buffer being written to. When a new max latency was
hit, the main ring buffer would swap with the snapshot buffer so that the
trace leading up to the latency would be saved in the snapshot buffer (The
snapshot buffer is never written to directly and the data within it can be
viewed without fear of being overwritten).
Later, a new feature was added to allow snapshots to be taken by user
space or even event triggers. This created a "snapshot" file that allowed
users to trigger a snapshot from user space to save the current trace.
The config for this new feature (CONFIG_TRACER_SNAPSHOT) would select the
latency tracer config (CONFIG_TRACER_MAX_LATENCY) as it would need all the
functionality from it as it already existed. But this was incorrect. As
the snapshot feature is really what the latency tracers need and not the
other way around.
Have CONFIG_TRACER_MAX_TRACE select CONFIG_TRACER_SNAPSHOT where the
tracers that needs the max latency buffer selects the TRACE_MAX_TRACE
which will then select TRACER_SNAPSHOT.
Also, go through trace.c and trace.h and make the code that only needs the
TRACER_MAX_TRACE protected by that and the code that always requires the
snapshot to be protected by TRACER_SNAPSHOT.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208183856.767870992@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Instead of having #ifdef CONFIG_TRACER_MAX_TRACE around every access to
the struct tracer's use_max_tr field, add a helper function for that
access and if CONFIG_TRACER_MAX_TRACE is not configured it just returns
false.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208183856.599390238@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When tracing was first added, there were latency tracers that would take a
snapshot of the current trace when a new max latency was hit. This
snapshot buffer was called "max_buffer". Since then, a snapshot feature
was added that allowed user space or event triggers to trigger a snapshot
of the current buffer using the same max_buffer of the trace_array.
As this snapshot buffer now has a more generic use case, calling it
"max_buffer" is confusing. Rename it to snapshot_buffer.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208183856.428446729@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The trace.c file was a dumping ground for most tracing code. Start
organizing it better by moving various functions out into their own files.
Move the PID filtering functions from trace.c into its own trace_pid.c
file.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.998330662@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The file trace.c has become a catchall for most things tracing. Start
making it smaller by breaking out various aspects into their own files.
Move the functions associated to the trace_printk operations out of trace.c and
into trace_printk.c.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.828744197@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The function trace_printk_init_buffers() is used to expand tha
trace_printk buffers when trace_printk() is used within the kernel or in
modules. On kernel boot up, it holds off from starting the sched switch
cmdline recorder, but will start it immediately when it is added by a
module.
Currently it uses a trick to see if the global_trace buffer has been
allocated or not to know if it was called by module load or not. But this
is more of a hack, and can not be used when this code is moved out of
trace.c. Instead simply look at the system_state and if it is running then
it is know that it could only be called by module load.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.660237094@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The trace.c file has become a dumping ground for all tracing code and has
become quite large. In order to move the trace_printk functions out of it
these functions can not access global_trace directly, as that is something
that needs to stay static in trace.c.
Instead of testing the trace_array tr pointer to &global_trace, test the
tr->flags to see if TRACE_ARRAY_FL_GLOBAL set.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.491116245@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The trace.c file has become a dumping ground for all tracing code and has
become quite large. In order to move the trace_printk functions out of it
these functions can not access global_trace directly, as that is something
that needs to stay static in trace.c.
Have tracing_update_buffers() take NULL for its trace_array to denote it
should work on the global_trace top level trace_array allows that function
to be used outside of trace.c and still update the global_trace
trace_array.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.318864210@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The printk_trace is used to determine which trace_array trace_printk()
writes to. By making it a global variable among the tracing subsystem it
will allow the trace_printk functions to be moved out of trace.c and still
have direct access to that variable.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.144525891@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The file trace.c has become a catchall for most things tracing. Start
making it smaller by breaking out various aspects into their own files.
Make ftrace_trace_stack() into a static inline that tests if stack tracing
is enabled and if so to call __ftrace_trace_stack() to do the stack trace.
This keeps the test inlined in the fast paths and only does the function
call if stack tracing is enabled.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032449.974218132@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The file trace.c has become a catchall for most things tracing. Start
making it smaller by breaking out various aspects into their own files.
Move the __always_inline functions __trace_buffer_lock_reserve(),
__trace_buffer_unlock_commit() and trace_event_setup() into trace.h.
The trace.c file will be split up and these functions will be used in more
than one of these files. As they are already __always_inline they can
easily be moved into the trace.h header file.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032449.813550600@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The file trace.c has become a catchall for most things tracing. Start
making it smaller by breaking out various aspects into their own files.
Make the variable tracing_selftest_running global so that it can be used
by other files in the tracing subsystem and trace.c can be split up.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032449.648932796@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The tracing_disabled variable is set to one on boot up to prevent some
parts of tracing to access the tracing infrastructure before it is set up.
It also can be set after boot if an anomaly is discovered.
It is currently a static variable in trace.c and can be accessed via a
function call trace_is_disabled(). There's really no reason to use a
function call as the tracing subsystem should be able to access it
directly.
By making the variable accessed directly, code can be moved out of trace.c
without adding overhead of a function call to see if tracing is disabled
or not.
Make tracing_disabled global and remove the tracing_is_disabled() helper
function. Also add some "unlikely()"s around tracing_disabled where it's
checked in hot paths.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032449.483690153@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
