| Age | Commit message (Collapse) | Author |
|---|
|
As done for kmalloc_obj*(), introduce a type-aware allocator for flexible
arrays, which may also have "counted_by" annotations:
ptr = kmalloc(struct_size(ptr, flex_member, count), gfp);
becomes:
ptr = kmalloc_flex(*ptr, flex_member, count, gfp);
The internal use of __flex_counter() allows for automatically setting
the counter member of a struct's flexible array member when it has
been annotated with __counted_by(), avoiding any missed early size
initializations while __counted_by() annotations are added to the
kernel. Additionally, this also checks for "too large" allocations based
on the type size of the counter variable. For example:
if (count > type_max(ptr->flex_counter))
fail...;
size = struct_size(ptr, flex_member, count);
ptr = kmalloc(size, gfp);
if (!ptr)
fail...;
ptr->flex_counter = count;
becomes (n.b. unchanged from earlier example):
ptr = kmalloc_flex(*ptr, flex_member, count, gfp);
if (!ptr)
fail...;
ptr->flex_counter = count;
Note that manual initialization of the flexible array counter is still
required (at some point) after allocation as not all compiler versions
support the __counted_by annotation yet. But doing it internally makes
sure they cannot be missed when __counted_by _is_ available, meaning
that the bounds checker will not trip due to the lack of "early enough"
initializations that used to work before enabling the stricter bounds
checking. For example:
ptr = kmalloc_flex(*ptr, flex_member, count, gfp);
fill(ptr->flex, count);
ptr->flex_count = count;
This works correctly before adding a __counted_by annotation (since
nothing is checking ptr->flex accesses against ptr->flex_count). After
adding the annotation, the bounds sanitizer would trip during fill()
because ptr->flex_count wasn't set yet. But with kmalloc_flex() setting
ptr->flex_count internally at allocation time, the existing code works
without needing to move the ptr->flex_count assignment before the call
to fill(). (This has been a stumbling block for __counted_by adoption.)
Link: https://patch.msgid.link/20251203233036.3212363-4-kees@kernel.org
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Introduce __flex_counter() which wraps __builtin_counted_by_ref(),
as newly introduced by GCC[1] and Clang[2]. Use of __flex_counter()
allows access to the counter member of a struct's flexible array member
when it has been annotated with __counted_by().
Introduce typeof_flex_counter(), overflows_flex_counter_type(), and
__set_flex_counter() to provide the needed _Generic() wrappers to get
sane results out of __flex_counter().
For example, with:
struct foo {
int counter;
short array[] __counted_by(counter);
} *p;
__flex_counter(p->array) will resolve to: &p->counter
typeof_flex_counter(p->array) will resolve to "int". (If p->array was not
annotated, it would resolve to "size_t".)
overflows_flex_counter_type(typeof(*p), array, COUNT) is the same as:
COUNT <= type_max(p->counter) && COUNT >= type_min(p->counter)
(If p->array was not annotated it would return true since everything
fits in size_t.)
__set_flex_counter(p->array, COUNT) is the same as:
p->counter = COUNT;
(It is a no-op if p->array is not annotated with __counted_by().)
Link: https://patch.msgid.link/20251203233036.3212363-3-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
To support shifting away from sized allocation towards typed
allocations, suggest the kmalloc_obj family of macros when a sizeof() is
present in the argument lists.
Link: https://patch.msgid.link/20251203233036.3212363-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Introduce type-aware kmalloc-family helpers to replace the common
idioms for single object and arrays of objects allocation:
ptr = kmalloc(sizeof(*ptr), gfp);
ptr = kmalloc(sizeof(struct some_obj_name), gfp);
ptr = kzalloc(sizeof(*ptr), gfp);
ptr = kmalloc_array(count, sizeof(*ptr), gfp);
ptr = kcalloc(count, sizeof(*ptr), gfp);
These become, respectively:
ptr = kmalloc_obj(*ptr, gfp);
ptr = kmalloc_obj(*ptr, gfp);
ptr = kzalloc_obj(*ptr, gfp);
ptr = kmalloc_objs(*ptr, count, gfp);
ptr = kzalloc_objs(*ptr, count, gfp);
Beyond the other benefits outlined below, the primary ergonomic benefit
is the elimination of needing "sizeof" nor the type name, and the
enforcement of assignment types (they do not return "void *", but rather
a pointer to the type of the first argument). The type name _can_ be
used, though, in the case where an assignment is indirect (e.g. via
"return"). This additionally allows[1] variables to be declared via
__auto_type:
__auto_type ptr = kmalloc_obj(struct foo, gfp);
Internal introspection of the allocated type now becomes possible,
allowing for future alignment-aware choices to be made by the allocator
and future hardening work that can be type sensitive. For example,
adding __alignof(*ptr) as an argument to the internal allocators so that
appropriate/efficient alignment choices can be made, or being able to
correctly choose per-allocation offset randomization within a bucket
that does not break alignment requirements.
Link: https://lore.kernel.org/all/CAHk-=wiCOTW5UftUrAnvJkr6769D29tF7Of79gUjdQHS_TkF5A@mail.gmail.com/ [1]
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://patch.msgid.link/20251203233036.3212363-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Although unlikely, devm_pm_runtime_enable() can fail due to memory
allocations. Without proper error handling, the subsequent
pm_runtime_resume_and_get() call may operate on incorrectly
initialized runtime PM state.
Add error handling to check the return value of
devm_pm_runtime_enable() and return on failure.
Fixes: 25f7d74d4514 ("hwspinlock: omap: Use devm_pm_runtime_enable() helper")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251124104805.135-1-vulab@iscas.ac.cn
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
There seems to be nothing preventing the driver from being compile
tested so enable that for wider build coverage.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251219110259.23630-1-johan@kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Since commit c6e126de43e7 ("of: Keep track of populated platform
devices") child devices will not be created by of_platform_populate()
if the devices had previously been deregistered individually so that the
OF_POPULATED flag is still set in the corresponding OF nodes.
Switch to using of_platform_depopulate() instead of open coding so that
the child devices are created if the driver is rebound.
Fixes: c6e126de43e7 ("of: Keep track of populated platform devices")
Cc: stable@vger.kernel.org # 3.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251219110119.23507-1-johan@kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
qcom,msm-id property must consist of two numbers, where the second
number is the subtype, as reported by dtbs_check:
sm6125-xiaomi-ginkgo.dtb: / (xiaomi,ginkgo): qcom,msm-id:0: [394] is too short
Xiaomi vendor DTS for Trinket IDP and QRD boards uses value of 0x10000,
so put it here as well.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251229142806.241088-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The header has a function which calls pr_err(). Don't require users of
the header to include <linux/printk.h> and include it here.
Fixes: 87cfc79dcd60 ("drm/msm/a6xx: Resolve the meaning of UBWC_MODE")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20260110-iris-ubwc-v1-1-dd70494dcd7b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Merge patches that Pengutronix have been carrying in their tree for a
while and were upstreamed by Sascha Hauer together with some new
features that are going into the next release.
|
|
Add a test for VMLOAD/VMSAVE in an L2 guest. The test verifies that L1
intercepts for VMSAVE/VMLOAD always work regardless of
VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK.
Then, more interestingly, it makes sure that when L1 does not intercept
VMLOAD/VMSAVE, they work as intended in L2. When
VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK is enabled by L1, VMSAVE/VMLOAD from
L2 should interpret the GPA as an L2 GPA and translate it through the
NPT. When VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK is disabled by L1,
VMSAVE/VMLOAD from L2 should interpret the GPA as an L1 GPA.
To test this, put two VMCBs (0 and 1) in L1's physical address space,
and have a single L2 GPA where:
- L2 VMCB GPA == L1 VMCB(0) GPA
- L2 VMCB GPA maps to L1 VMCB(1) via the NPT in L1.
This setup allows detecting how the GPA is interpreted based on which L1
VMCB is actually accessed.
In both cases, L2 sets KERNEL_GS_BASE (one of the fields handled by
VMSAVE/VMLOAD), and executes VMSAVE to write its value to the VMCB. The
test userspace code then checks that the write was made to the correct
VMCB (based on whether VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK is set by L1),
and writes a new value to that VMCB. L2 then executes VMLOAD to load the
new value and makes sure it's reflected correctly in KERNERL_GS_BASE.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20260110004821.3411245-4-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Virtual VMSAVE/VMLOAD enablement (i.e.
VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK) is set/cleared by
svm_recalc_instruction_intercepts() when the intercepts are cleared/set.
This is unnecessary because the bit is meaningless when intercepts are
set and KVM emulates the instructions. Initialize the bit in vmcb01 base
on vls, and keep it unchanged.
This is similar-ish to how vGIF is handled. It is enabled in init_vmcb()
if vgif=1 and remains unchanged when the STGI intercept is enabled (e.g.
for NMI windows).
This fixes a bug in svm_recalc_instruction_intercepts(). The intercepts
for VMSAVE/VMLOAD are always toggled in vmcb01, but
VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK is toggled in the current VMCB, which
could be vmcb02 instead of vmcb01 if L2 is active.
Virtual VMSAVE/VMLOAD enablement in vmcb02 is separately controlled by
nested_vmcb02_prepare_control() based on the vCPU features and VMCB12,
and if intercepts are needed they are set by recalc_intercepts().
The bug is benign though. Not toggling the bit for vmcb01 is harmless
because it's useless anyway. For vmcb02:
- The bit could be incorrectly cleared when intercepts are set in
vmcb01. This is harmless because VMSAVE/VMLOAD will be emulated by KVM
anyway.
- The bit could be incorrectly set when the intercepts are cleared in
vmcb01. However, if the bit was originally clear in vmcb02, then
recalc_intercepts() will enable in the intercepts in vmcb02 anyway and
VMSAVE/VMLOAD will be emulated by KVM.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20260110004821.3411245-3-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload
of guest state") made KVM always use vmcb01 for the fields controlled by
VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code
to always use vmcb01.
As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not
intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01
instead of the current VMCB.
Fixes: cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20260110004821.3411245-2-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
With the compile time check located immediately above the
cred_has_capability() function ensuring that we will notice if the
capability set grows beyond 63 capabilities, we can safely remove
the BUG() call from the cred_has_capability().
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Many of the compiler option checks are not necessary anymore with the
current supported versions of compilers (clang 15+, GCC 8.1+).
Remove them.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260113-kbuild-cc-option-v1-1-011314a0f7f1@weissschuh.net
[nathan: Add minor note about currently supported compilers]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
fails
Unregistering the posted interrupt wakeup handler only happens during
hardware unsetup. Therefore, if alloc_kvm_area() fails and continue to
register the posted interrupt wakeup handler, this will leave the global
posted interrupt wakeup handler pointer in an incorrect state. Although
it should not be an issue, it's still better to change it.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Fixes: ec5a4919fa7b ("KVM: VMX: Unregister posted interrupt wakeup handler on hardware unsetup")
Link: https://patch.msgid.link/0ac6908b608cf80eab7437004334fedd0f5f5317.1768304590.git.houwenlong.hwl@antgroup.com
[sean: use a goto]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When disconnecting a non-MSI irqfd from an IRQ bypass producer, WARN if
the irqfd is configured for IRQ bypass and set its IRTE back to remapped
mode to harden against kernel/KVM bugs (keeping the irqfd in bypass mode
is often fatal to the host).
Deactivating an irqfd (removing it from the list of irqfds), updating
irqfd routes, and the code in question are all mutually exclusive (all
run under irqfds.lock). If an irqfd is configured for bypass, and the
irqfd is deassigned at the same time IRQ routing is updated (to change the
routing to non-MSI), then either kvm_arch_update_irqfd_routing() should
process the irqfd routing change and put the IRTE into remapped mode
(routing update "wins"), or kvm_arch_irq_bypass_del_producer() should see
the MSI routing info (deactivation "wins").
Link: https://patch.msgid.link/20260113174606.104978-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When deassigning a KVM_IRQFD, don't clobber the irqfd's copy of the IRQ's
routing entry as doing so breaks kvm_arch_irq_bypass_del_producer() on x86
and arm64, which explicitly look for KVM_IRQ_ROUTING_MSI. Instead, to
handle a concurrent routing update, verify that the irqfd is still active
before consuming the routing information. As evidenced by the x86 and
arm64 bugs, and another bug in kvm_arch_update_irqfd_routing() (see below),
clobbering the entry type without notifying arch code is surprising and
error prone.
As a bonus, checking that the irqfd is active provides a convenient
location for documenting _why_ KVM must not consume the routing entry for
an irqfd that is in the process of being deassigned: once the irqfd is
deleted from the list (which happens *before* the eventfd is detached), it
will no longer receive updates via kvm_irq_routing_update(), and so KVM
could deliver an event using stale routing information (relative to
KVM_SET_GSI_ROUTING returning to userspace).
As an even better bonus, explicitly checking for the irqfd being active
fixes a similar bug to the one the clobbering is trying to prevent: if an
irqfd is deactivated, and then its routing is changed,
kvm_irq_routing_update() won't invoke kvm_arch_update_irqfd_routing()
(because the irqfd isn't in the list). And so if the irqfd is in bypass
mode, IRQs will continue to be posted using the old routing information.
As for kvm_arch_irq_bypass_del_producer(), clobbering the routing type
results in KVM incorrectly keeping the IRQ in bypass mode, which is
especially problematic on AMD as KVM tracks IRQs that are being posted to
a vCPU in a list whose lifetime is tied to the irqfd.
Without the help of KASAN to detect use-after-free, the most common
sympton on AMD is a NULL pointer deref in amd_iommu_update_ga() due to
the memory for irqfd structure being re-allocated and zeroed, resulting
in irqfd->irq_bypass_data being NULL when read by
avic_update_iommu_vcpu_affinity():
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 40cf2b9067 P4D 40cf2b9067 PUD 408362a067 PMD 0
Oops: Oops: 0000 [#1] SMP
CPU: 6 UID: 0 PID: 40383 Comm: vfio_irq_test
Tainted: G U W O 6.19.0-smp--5dddc257e6b2-irqfd #31 NONE
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025
RIP: 0010:amd_iommu_update_ga+0x19/0xe0
Call Trace:
<TASK>
avic_update_iommu_vcpu_affinity+0x3d/0x90 [kvm_amd]
__avic_vcpu_load+0xf4/0x130 [kvm_amd]
kvm_arch_vcpu_load+0x89/0x210 [kvm]
vcpu_load+0x30/0x40 [kvm]
kvm_arch_vcpu_ioctl_run+0x45/0x620 [kvm]
kvm_vcpu_ioctl+0x571/0x6a0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x6f/0x9d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x46893b
</TASK>
---[ end trace 0000000000000000 ]---
If AVIC is inhibited when the irfd is deassigned, the bug will manifest as
list corruption, e.g. on the next irqfd assignment.
list_add corruption. next->prev should be prev (ffff8d474d5cd588),
but was 0000000000000000. (next=ffff8d8658f86530).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:31!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 128 UID: 0 PID: 80818 Comm: vfio_irq_test
Tainted: G U W O 6.19.0-smp--f19dc4d680ba-irqfd #28 NONE
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025
RIP: 0010:__list_add_valid_or_report+0x97/0xc0
Call Trace:
<TASK>
avic_pi_update_irte+0x28e/0x2b0 [kvm_amd]
kvm_pi_update_irte+0xbf/0x190 [kvm]
kvm_arch_irq_bypass_add_producer+0x72/0x90 [kvm]
irq_bypass_register_consumer+0xcd/0x170 [irqbypass]
kvm_irqfd+0x4c6/0x540 [kvm]
kvm_vm_ioctl+0x118/0x5d0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x6f/0x9d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
On Intel and arm64, the bug is less noisy, as the end result is that the
device keeps posting IRQs to the vCPU even after it's been deassigned.
Note, the worst of the breakage can be traced back to commit cb210737675e
("KVM: Pass new routing entries and irqfd when updating IRTEs"), as before
that commit KVM would pull the routing information from the per-VM routing
table. But as above, similar bugs have existed since support for IRQ
bypass was added. E.g. if a routing change finished before irq_shutdown()
invoked kvm_arch_irq_bypass_del_producer(), VMX and SVM would see stale
routing information and potentially leave the irqfd in bypass mode.
Alternatively, x86 could be fixed by explicitly checking irq_bypass_vcpu
instead of irq_entry.type in kvm_arch_irq_bypass_del_producer(), and arm64
could be modified to utilize irq_bypass_vcpu in a similar manner. But (a)
that wouldn't fix the routing updates bug, and (b) fixing core code doesn't
preclude x86 (or arm64) from adding such code as a sanity check (spoiler
alert).
Fixes: f70c20aaf141 ("KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd'")
Fixes: cb210737675e ("KVM: Pass new routing entries and irqfd when updating IRTEs")
Fixes: a0d7e2fc61ab ("KVM: arm64: vgic-v4: Only attempt vLPI mapping for actual MSIs")
Cc: stable@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260113174606.104978-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
There was a typo, likely a cut-n-paste bug, where we were checking for
SECCLASS_CAPABILITY instead of SECCLASS_CAPABILITY2.
Fixes: 5473a722f782 ("selinux: add support for BPF token access control")
Reported-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
When allocating the AVIC backing page, only check one of the max AVIC vs.
x2AVIC ID based on whether or not x2AVIC is enabled. Doing so fixes a bug
where KVM incorrectly inhibits AVIC if x2AVIC is _disabled_ and any vCPU
with a non-zero APIC ID is created, as x2avic_max_physical_id is left '0'
when x2AVIC is disabled.
Fixes: 940fc47cfb0d ("KVM: SVM: Add AVIC support for 4k vCPUs in x2AVIC mode")
Cc: stable@vger.kernel.org
Cc: Naveen N Rao (AMD) <naveen@kernel.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://patch.msgid.link/20260112232805.1512361-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Remove the newly introduced zoned statistics from sysfs, as sysfs can
only show a single page this will truncate the output on a busy
filesystem.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Merge series from Sascha Hauer <s.hauer@pengutronix.de>:
These are some patches for the tlv320adcx140 codec we are carrying
around for a while, time to upstream them.
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Add support for system suspend into the class driver, now split
out into a separate patch series.
Where we got to on the previous discussion, was we don't currently
have any parts requiring download on runtime resume, doing so
will add noticeable delay to the runtime resume, and we are not
blocking someone from adding support for firmware download on
runtime resume in the future. Also as runtime resume is really
a kernel concept and power rails are primarily controlled by
ACPI it is quite unlikely anyone will actually power down the
part on a runtime suspend anyway. So this version of the chain
still only downloads firmware on probe and system resume.
|
|
Merge series from Bharadwaj Raju <bharadwaj.raju@machinesoul.in>:
The AW88261 has a DVDD chip which needs to be powered on for it to
function correctly. The property for this was missing, so this patchset
adds the dvdd-supply property which enables a regulator to be bound
to it in a device tree.
|
|
[Why&How]
Right now, the HDMI HPD filter is enabled by default at 1500ms.
We want to disable it by default, as most modern displays with HDMI do
not require it for DPMS mode.
The HPD can instead be enabled as a driver parameter with a custom delay
value in ms (up to 5000ms).
Fixes: c918e75e1ed9 ("drm/amd/display: Add an HPD filter for HDMI")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4859
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6a681cd9034587fe3550868bacfbd639d1c6891f)
|
|
The user mode queue keeps a pointer to the most recent fence in
userq->last_fence. This pointer holds an extra dma_fence reference.
When the queue is destroyed, we free the fence driver and its xarray,
but we forgot to drop the last_fence reference.
Because of the missing dma_fence_put(), the last fence object can stay
alive when the driver unloads. This leaves an allocated object in the
amdgpu_userq_fence slab cache and triggers
This is visible during driver unload as:
BUG amdgpu_userq_fence: Objects remaining on __kmem_cache_shutdown()
kmem_cache_destroy amdgpu_userq_fence: Slab cache still has objects
Call Trace:
kmem_cache_destroy
amdgpu_userq_fence_slab_fini
amdgpu_exit
__do_sys_delete_module
Fix this by putting userq->last_fence and clearing the pointer during
amdgpu_userq_fence_driver_free().
This makes sure the fence reference is released and the slab cache is
empty when the module exits.
v2: Update to only release userq->last_fence with dma_fence_put()
(Christian)
Fixes: edc762a51c71 ("drm/amdgpu/userq: move some code around")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8e051e38a8d45caf6a866d4ff842105b577953bb)
|
|
Each queue of the process is individually removed and there is not need
to suspend whole mes. Suspending mes stops kernel mode queues also
causing unnecessary timeouts when running mixed work loads
Fixes: 079ae5118e1f ("drm/amdkfd: fix suspend/resume all calls in mes based eviction path")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4765
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3fd20580b96a6e9da65b94ac3b58ee288239b731)
|
|
This reverts commit 820b3d376e8a102c6aeab737ec6edebbbb710e04.
It’s better to validate VM TLB flushes in the flush‑TLB backend
rather than in the generic VM layer.
Reverting this patch depends on
commit fa7c231fc2b0 ("drm/amdgpu: validate the flush_gpu_tlb_pasid()")
being present in the tree.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9163fe4d790fb4e16d6b0e23f55b43cddd3d4a65)
|
|
Validate flush_gpu_tlb_pasid() availability before flushing tlb.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f4db9913e4d3dabe9ff3ea6178f2c1bc286012b8)
|
|
resolving the issue of incorrect type definitions potentially causing calculation errors.
Fixes: 54f7f3ca982a ("drm/amdgpu/swm14: Update power limit logic")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e3a03d0ae16d6b56e893cce8e52b44140e1ed985)
|
|
Internal backlight levels are initialised from ACPI but the values
are sometimes out of sync with the levels in effect until there has
been a read from hardware (eg triggered by reading from sysfs).
This means that the first drm_commit can cause the levels to be set
to a different value than the actual starting one, which results in
a sudden change in brightness.
This path shows the problem (when the values are out of sync):
amdgpu_dm_atomic_commit_tail()
-> amdgpu_dm_commit_streams()
-> amdgpu_dm_backlight_set_level(..., dm->brightness[n])
This patch calls the backlight ops get_brightness explicitly
at the end of backlight registration to make sure dm->brightness[n]
is in sync with the actual hardware levels.
Fixes: 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI")
Signed-off-by: Vivek Das Mohapatra <vivek@collabora.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 318b1c36d82a0cd2b06a4bb43272fa6f1bc8adc1)
Cc: stable@vger.kernel.org
|
|
[Why]
DP-HDMI dongles can execeed bandwidth requirements on high resolution
monitors. This can lead to pruning the high resolution modes.
HDMI 1.3 bumped the clock to 340MHz, but display code never matched it.
[How]
Set default to (DVI) 165MHz. Once HDMI display is identified update
to 340MHz.
Reported-by: Dianne Skoll <dianne@skoll.ca>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4780
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ac1e65d8ade46c09fb184579b81acadf36dcb91e)
Cc: stable@vger.kernel.org
|
|
[Why]
The PSR message was moved in commit 4321742c394e ("drm/amd/display:
Move PSR support message into amdgpu_dm"). This message however shows
for every single link without showing which link is which. This can
send a confusing message to the user.
[How]
Add link name into the message.
Fixes: 4321742c394e ("drm/amd/display: Move PSR support message into amdgpu_dm")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99f77f6229c0766b980ae05affcf9f742d97de6a)
|
|
If dqm->ops.initialize() fails, add deallocate_hiq_sdma_mqd()
to release the memory allocated by allocate_hiq_sdma_mqd().
Move deallocate_hiq_sdma_mqd() up to ensure proper function
visibility at the point of use.
Fixes: 11614c36bc8f ("drm/amdkfd: Allocate MQD trunk for HIQ and SDMA")
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b7cccc8286bb9919a0952c812872da1dcfe9d390)
Cc: stable@vger.kernel.org
|
|
These IOCTLs shouldn't be called when userqs are not
enabled. Make sure they are enabled before executing
the IOCTLs.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d967509651601cddce7ff2a9f09479f3636f684d)
Cc: stable@vger.kernel.org
|
|
Use dst input parameter to setup gart page table entries instead of using fixed
location.
Fixes: 237d623ae659 ("drm/amdgpu/gart: Add helper to bind VRAM pages (v2)")
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ca5d4db8db843be7ed35fc9334737490c2b58d32)
|
|
GC12 VRAM surfaces"
This reverts commit 22a36e660d014925114feb09a2680bb3c2d1e279 once,
which was merged twice due to an incorrect backmerge resolution.
Fixes: ce0478b02ed2 ("Merge tag 'v6.18-rc6' into drm-next")
Signed-off-by: Peter Colberg <pcolberg@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 38a0f4cf8c6147fd10baa206ab349f8ff724e391)
|
|
When an eGPU is unplugged the KFD topology should also be destroyed
for that GPU. This never happens because the fini_sw callbacks never
get to run. Run them manually before calling amdgpu_device_ip_fini_early()
when a device has already been disconnected.
This location is intentionally chosen to make sure that the kfd locking
refcount doesn't get incremented unintentionally.
Cc: kent.russell@amd.com
Closes: https://community.frame.work/t/amd-egpu-on-linux/8691/33
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6a23e7b4332c10f8b56c33a9c5431b52ecff9aab)
Cc: stable@vger.kernel.org
|
|
When driver not support atomic, fb using plane->fb rather than
plane->state->fb.
Fixes: fe151ed7af54 ("drm/amdgpu: add generic display panic helper code")
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2f2a72de673513247cd6fae14e53f6c40c5841ef)
|
|
Fix copy&paste error, that should have been an assignment instead of an or,
otherwise MTYPE_UC 0x3 can not be updated to MTYPE_RW 0x1.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fc1366016abe4103c0f0fac882811aea961ef213)
Cc: stable@vger.kernel.org
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This series fixes a problem with soc_sdw_utils.c calling the wrong
codec init callbacks, because it assumed that the DAI name could be
used to uniquely identify the codec. This isn't the case, especially
on SDCA which is a generic driver for many parts.
The first patch is needed to add a missing export to SoundWire core.
|
|
Pull NVMe fixes from Keith:
"- Device quirk to disable faulty temperature (Ilikara)
- TCP target null pointer fix from bad host protocol usage (Shivam)
- Add compatible apple controller (Janne)
- FC tagset leak fix (Chaitanya)
- TCP socket deadlock fix (Hannes)
- Target name buffer overrun fix (Shin'ichiro)"
* tag 'nvme-6.19-2026-01-14' of git://git.infradead.org/nvme:
nvme: fix PCIe subsystem reset controller state transition
nvmet: do not copy beyond sybsysnqn string length
nvmet-tcp: fixup hang in nvmet_tcp_listen_data_ready()
nvme-fc: release admin tagset if init fails
nvme-apple: add "apple,t8103-nvme-ans2" as compatible
nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec
nvme-pci: disable secondary temp for Wodposit WPBSNM8
|
|
`build_assert` relies on the compiler to optimize out its error path.
Functions using it with its arguments must thus always be inlined,
otherwise the error path of `build_assert` might not be optimized out,
triggering a build error.
Cc: stable@vger.kernel.org
Fixes: 746680ec6696 ("rust: irq: add flags module")
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20251208-io-build-assert-v3-6-98aded02c1ea@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
`build_assert` relies on the compiler to optimize out its error path.
Functions using it with its arguments must thus always be inlined,
otherwise the error path of `build_assert` might not be optimized out,
triggering a build error.
Cc: stable@vger.kernel.org
Fixes: ce30d94e6855 ("rust: add `io::{Io, IoRaw}` base types")
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20251208-io-build-assert-v3-2-98aded02c1ea@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
[Why&How]
Right now, the HDMI HPD filter is enabled by default at 1500ms.
We want to disable it by default, as most modern displays with HDMI do
not require it for DPMS mode.
The HPD can instead be enabled as a driver parameter with a custom delay
value in ms (up to 5000ms).
Fixes: c918e75e1ed9 ("drm/amd/display: Add an HPD filter for HDMI")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4859
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To allocate kernel BO from VRAM domain for MQD in the following patch.
No functional change because kernel BO allocate all from GTT domain.
Rename amdgpu_amdkfd_alloc_gtt_mem to amdgpu_amdkfd_alloc_kernel_mem
Rename amdgpu_amdkfd_free_gtt_mem to amdgpu_amdkfd_free_kernel_mem
Rename mem_kfd_mem_obj gtt_mem to mem
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The user mode queue keeps a pointer to the most recent fence in
userq->last_fence. This pointer holds an extra dma_fence reference.
When the queue is destroyed, we free the fence driver and its xarray,
but we forgot to drop the last_fence reference.
Because of the missing dma_fence_put(), the last fence object can stay
alive when the driver unloads. This leaves an allocated object in the
amdgpu_userq_fence slab cache and triggers
This is visible during driver unload as:
BUG amdgpu_userq_fence: Objects remaining on __kmem_cache_shutdown()
kmem_cache_destroy amdgpu_userq_fence: Slab cache still has objects
Call Trace:
kmem_cache_destroy
amdgpu_userq_fence_slab_fini
amdgpu_exit
__do_sys_delete_module
Fix this by putting userq->last_fence and clearing the pointer during
amdgpu_userq_fence_driver_free().
This makes sure the fence reference is released and the slab cache is
empty when the module exits.
v2: Update to only release userq->last_fence with dma_fence_put()
(Christian)
Fixes: edc762a51c71 ("drm/amdgpu/userq: move some code around")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Each queue of the process is individually removed and there is not need
to suspend whole mes. Suspending mes stops kernel mode queues also
causing unnecessary timeouts when running mixed work loads
Fixes: 079ae5118e1f ("drm/amdkfd: fix suspend/resume all calls in mes based eviction path")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4765
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use emit_clk_levels instead. Also, remove the unused helper function for
getting sysfs buffer offset.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
print_clk_levels is no longer used, use emit_clk_levels instead.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
