| Age | Commit message (Collapse) | Author |
|---|
|
For protected VMs, the guest's timer offset state should not be
controlled by the host and must always run with a virtual counter offset
of 0. The existing timer logic allowed the host to set and manage the
timer counter offsets for protected VMs in certain cases.
Disable all host-side management of timer offsets for protected VMs by
adding checks in the relevant code paths.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251211104710.151771-10-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Certain VM IOCTLs are tied to specific VM features. Since pKVM does not
support all features, restrict which IOCTLs are allowed depending on
whether the associated feature is supported.
Use the existing VM capability check as the source of truth to whether
an IOCTL is allowed for a particular VM by mapping the IOCTLs with their
associated capabilities.
Suggested-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251211104710.151771-9-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Track KVM IOCTLs (VM IOCTLs for now), and the associated KVM capability
that enables that IOCTL. Add a function that performs the lookup.
This will be used by CoCo VM Hypervisors (e.g., pKVM) to determine
whether a particular KVM IOCTL is allowed for its VMs.
Suggested-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
[maz: don't expose KVM_CAP_BASIC to userspace, and rely on NR_VCPUS
as a proxy for this]
Link: https://patch.msgid.link/20251211104710.151771-8-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Supporting MTE in pKVM introduces significant complexity to the
hypervisor at EL2, even for non-protected VMs, since it would require
EL2 to handle tag management.
For now, do not allow KVM_CAP_ARM_MTE for any VM type in protected mode.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251211104710.151771-7-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Certain features and capabilities are restricted in protected mode. Most
of these features are restricted only for protected VMs, but some
are restricted for ALL VMs in protected mode.
Extend the pKVM capability check to pass the VM (kvm), and use that when
determining supported features.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251211104710.151771-6-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
This 12-bit FAR fault IPA offset mask is hard-coded as 'GENMASK(11, 0)'
in several places to reconstruct the full fault IPA.
Introduce FAR_TO_FIPA_OFFSET() to calculate this value in a shared
header and replace all open-coded instances to improve readability.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251211104710.151771-5-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The function pkvm_init_features_from_host() initializes guest
features, propagating them from the host. The logic to propagate
KVM_ARCH_FLAG_MTE_ENABLED (Memory Tagging Extension)
has a couple of issues.
First, the check was in the common path, before the divergence for
protected and non-protected VMs. For non-protected VMs, this was
unnecessary, as 'kvm->arch.flags' is completely overwritten by
host_arch_flags immediately after, which already contains the MTE flag.
For protected VMs, this was setting the flag even if the feature is not
allowed.
Second, the check was reading 'host_kvm->arch.flags' instead of using
the local 'host_arch_flags', which is read once from the host flags.
Fix these by moving the MTE flag check inside the protected-VM-only
path, checking if the feature is allowed, and changing it to use the
correct host_arch_flags local variable. This ensures non-protected VMs
get the flag via the bulk copy, and protected VMs get it via an explicit
check.
Fixes: b7f345fbc32a ("KVM: arm64: Fix FEAT_MTE in pKVM")
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251211104710.151771-4-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The E2TB bits in MDCR_EL2 control trapping of Trace Buffer system
register accesses. These accesses are trapped to EL2 when the bits are
clear.
The trap initialization logic for protected VMs in pvm_init_traps_mdcr()
had the polarity inverted. When a guest did not support the Trace Buffer
feature, the code was setting E2TB. This incorrectly disabled the trap,
potentially allowing a protected guest to access registers for a feature
it was not given.
Fix this by inverting the operation.
Fixes: f50758260bff ("KVM: arm64: Group setting traps for protected VMs by control register")
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251211104710.151771-3-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
For protected VMs in pKVM, the hypervisor should trap accesses to trace
buffer system registers if Trace Buffer isn't supported by the VM.
However, the current code only traps if Trace Buffer External Mode isn't
supported.
Fix this by checking for FEAT_TRBE (Trace Buffer) rather than
FEAT_TRBE_EXT.
Fixes: 9d5261269098 ("KVM: arm64: Trap external trace for protected VMs")
Reported-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251211104710.151771-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
On FPGA Development boards with GPIOs the OpenRISC architecture uses the
opencores gpio verilog rtl. This is compatible with the gpio-mmio. Add
the compatible string to allow probing this driver from the devicetree.
Link: https://opencores.org/projects/gpio
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20260115151014.3956805-3-shorne@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
In commit f48b5e8bc2e1 ("dt-bindings: gpio-mmio: Add compatible string
for opencores,gpio") we marked opencores,gpio to be allowed with
brcm,bcm6345-gpio. This was wrong, opencores,gpio is not compatible with
brcm,bcm6345-gpio. It has a different register map and is 8-bit vs
Broadcom which is 32-bit. Change opencores,gpio to be a separate
compatible string for MMIO GPIO.
Also, as this change rewrote the entire enum, I took this opportunity to
alphabetically sort the list.
Fixes: f48b5e8bc2e1 ("dt-bindings: gpio-mmio: Add compatible string for opencores,gpio")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260115151014.3956805-2-shorne@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Since commit 56344e241c54 ("i2c: tegra: Fix reset error handling with
ACPI") replace reset_control_reset() with device_reset(), the rst
is no longer used, remove it.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251217081601.93856-1-kanie@linux.alibaba.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, Clk, GPIO, Power, Regulator and RTC due for the v6.20 merge window
|
|
As noticed in the discussion [1] the Baikal SoC and platforms
are not going to be finalized, hence remove stale code.
Link: https://lore.kernel.org/lkml/22b92ddf-6321-41b5-8073-f9c7064d3432@infradead.org/ [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260114081954.252160-2-andriy.shevchenko@linux.intel.com
|
|
The pg_remaining calculation in ftrace_process_locs() assumes that
ENTRIES_PER_PAGE multiplied by 2^order equals the actual capacity of the
allocated page group. However, ENTRIES_PER_PAGE is PAGE_SIZE / ENTRY_SIZE
(integer division). When PAGE_SIZE is not a multiple of ENTRY_SIZE (e.g.
4096 / 24 = 170 with remainder 16), high-order allocations (like 256 pages)
have significantly more capacity than 256 * 170. This leads to pg_remaining
being underestimated, which in turn makes skip (derived from skipped -
pg_remaining) larger than expected, causing the WARN(skip != remaining)
to trigger.
Extra allocated pages for ftrace: 2 with 654 skipped
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7295 ftrace_process_locs+0x5bf/0x5e0
A similar problem in ftrace_allocate_records() can result in allocating
too many pages. This can trigger the second warning in
ftrace_process_locs().
Extra allocated pages for ftrace
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7276 ftrace_process_locs+0x548/0x580
Use the actual capacity of a page group to determine the number of pages
to allocate. Have ftrace_allocate_pages() return the number of allocated
pages to avoid having to calculate it. Use the actual page group capacity
when validating the number of unused pages due to skipped entries.
Drop the definition of ENTRIES_PER_PAGE since it is no longer used.
Cc: stable@vger.kernel.org
Fixes: 4a3efc6baff93 ("ftrace: Update the mcount_loc check of skipped entries")
Link: https://patch.msgid.link/20260113152243.3557219-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
clangd reports many "unused header" warnings throughout the Xe driver.
Start working to clean this up by removing unnecessary includes in our
.c files and/or replacing them with explicit includes of other headers
that were previously being included indirectly.
By far the most common offender here was unnecessary inclusion of
xe_gt.h. That likely originates from the early days of xe.ko when
xe_mmio did not exist and all register accesses, including those
unrelated to GTs, were done with GT functions.
There's still a lot of additional #include cleanup that can be done in
the headers themselves; that will come as a followup series.
v2:
- Squash the 79-patch series down to a single patch. (MattB)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260115032803.4067824-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
During device unmapping (triggered by module unload or explicit unmap),
a refcount underflow occurs causing a use-after-free warning:
[14747.574913] ------------[ cut here ]------------
[14747.574916] refcount_t: underflow; use-after-free.
[14747.574917] WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x55/0x90, CPU#9: kworker/9:1/378
[14747.574924] Modules linked in: rnbd_client(-) rtrs_client rnbd_server rtrs_server rtrs_core ...
[14747.574998] CPU: 9 UID: 0 PID: 378 Comm: kworker/9:1 Tainted: G O N 6.19.0-rc3lblk-fnext+ #42 PREEMPT(voluntary)
[14747.575005] Workqueue: rnbd_clt_wq unmap_device_work [rnbd_client]
[14747.575010] RIP: 0010:refcount_warn_saturate+0x55/0x90
[14747.575037] Call Trace:
[14747.575038] <TASK>
[14747.575038] rnbd_clt_unmap_device+0x170/0x1d0 [rnbd_client]
[14747.575044] process_one_work+0x211/0x600
[14747.575052] worker_thread+0x184/0x330
[14747.575055] ? __pfx_worker_thread+0x10/0x10
[14747.575058] kthread+0x10d/0x250
[14747.575062] ? __pfx_kthread+0x10/0x10
[14747.575066] ret_from_fork+0x319/0x390
[14747.575069] ? __pfx_kthread+0x10/0x10
[14747.575072] ret_from_fork_asm+0x1a/0x30
[14747.575083] </TASK>
[14747.575096] ---[ end trace 0000000000000000 ]---
Befor this patch :-
The bug is a double kobject_put() on dev->kobj during device cleanup.
Kobject Lifecycle:
kobject_init_and_add() sets kobj.kref = 1 (initialization)
kobject_put() sets kobj.kref = 0 (should be called once)
* Before this patch:
rnbd_clt_unmap_device()
rnbd_destroy_sysfs()
kobject_del(&dev->kobj) [remove from sysfs]
kobject_put(&dev->kobj) PUT #1 (WRONG!)
kref: 1 to 0
rnbd_dev_release()
kfree(dev) [DEVICE FREED!]
rnbd_destroy_gen_disk() [use-after-free!]
rnbd_clt_put_dev()
refcount_dec_and_test(&dev->refcount)
kobject_put(&dev->kobj) PUT #2 (UNDERFLOW!)
kref: 0 to -1 [WARNING!]
The first kobject_put() in rnbd_destroy_sysfs() prematurely frees the
device via rnbd_dev_release(), then the second kobject_put() in
rnbd_clt_put_dev() causes refcount underflow.
* After this patch :-
Remove kobject_put() from rnbd_destroy_sysfs(). This function should
only remove sysfs visibility (kobject_del), not manage object lifetime.
Call Graph (FIXED):
rnbd_clt_unmap_device()
rnbd_destroy_sysfs()
kobject_del(&dev->kobj) [remove from sysfs only]
[kref unchanged: 1]
rnbd_destroy_gen_disk() [device still valid]
rnbd_clt_put_dev()
refcount_dec_and_test(&dev->refcount)
kobject_put(&dev->kobj) ONLY PUT (CORRECT!)
kref: 1 to 0 [BALANCED]
rnbd_dev_release()
kfree(dev) [CLEAN DESTRUCTION]
This follows the kernel pattern where sysfs removal (kobject_del) is
separate from object destruction (kobject_put).
Fixes: 581cf833cac4 ("block: rnbd: add .release to rnbd_dev_ktype")
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add Intel Nova Lake PCH-S SPI serial flash PCI ID to the list of
supported devices. This is the same controller found in previous
generations.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20260115120305.10080-1-alan.borzeszkowski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
During an SPI read operation, even if the xspi->txbuf passed to the
cdns_spi_writerinterface is empty, it is still necessary to call
cdns_spi_write(xspi, CDNS_SPI_TXD, txw); otherwise, the read operation
will fail to obtain data correctly due to a lack of clocks.
Fixes: 4e00135b2dd1 ("spi: spi-cadence: supports transmission with bits_per_word of 16 and 32")
Reported-by: Rodrigo Alencar <455.rodrigo.alencar@gmail.com>
Closes: https://lore.kernel.org/all/lbijvnnwsnddonmm5pveqzap6iibxhl4maneq43x4j6w64dev6@u75qhm5cwiob/
Signed-off-by: Jun Guo <jun.guo@cixtech.com>
Link: https://patch.msgid.link/20260115091924.844179-1-jun.guo@cixtech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
HP released the new laptop with the subid 0x103C.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20260115124907.629-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.19
A moderately large collection of fixes since I missed a week, plus a few
new device IDs and quirks. It's all fairly minor, including a bunch of
work on the device tree bindings fixes which have no runtime effect.
There's one SoundWire change here exporting a symbol which was required
for a fix to the ASoC SoundWire code.
|
|
Disabling OOBE is an important step to be able to fully control the
hardware in TUF laptops that requires this command, but the command
has been incorrectly tied to deprecated attributes: restore sending
the OOBE exit command.
Fixes: c683651b6791 ("platform/x86: asus-wmi: deprecate bios features")
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260102234344.366227-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TDP data for laptop model FA617XT.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260112215038.575883-4-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TDP data for laptop model FA401UV.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260112215038.575883-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TDP data for laptop model GV302XV.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260112215038.575883-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add the DMI entry and power limits for the Asus ROG Strix G15
Advantage Edition (G513QY). This laptop requires manual fan curves
and specific APU/Platform PPT limits.
Signed-off-by: Shresth Sarthak Awasthi <bengdeeba@gmail.com>
Link: https://patch.msgid.link/20260109130557.78720-1-bengdeeba@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The tmp buffer is allocated using kcalloc() but is not freed if
acpi_evaluate_dsm() fails. This causes a memory leak in the error path.
Fix this by explicitly freeing the tmp buffer in the error handling
path of acpi_evaluate_dsm().
Fixes: 58e82a62669d ("platform/x86/amd: Add support for AMD ACPI based Wifi band RFI mitigation feature")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Co-developed-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20260106091318.747019-1-zilin@seu.edu.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In SN5640/SN5610 platforms should be used XDR style LED data with
predefined slot index per led_fan.
Fixes: 317bbe169c46 ("platform: mellanox: mlx-platform: Add support for new Nvidia system")
Signed-off-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://patch.msgid.link/20260107142548.916556-1-oleksandrs@nvidia.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Fix minor documentation errors in `kvm_util.h` and `kvm_util.c`.
- Correct the argument description for `vcpu_args_set` in `kvm_util.h`,
which incorrectly listed `vm` instead of `vcpu`.
- Fix a typo in the comment for `kvm_selftest_arch_init` ("exeucting" ->
"executing").
- Correct the return value description for `vm_vaddr_unused_gap` in
`kvm_util.c` to match the implementation, which returns an address "at
or above" `vaddr_min`, not "at or below".
No functional change intended.
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260109082218.3236580-6-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
To avoid code duplication, move page_align() to the shared `kvm_util.h`
header file. Rename it to vm_page_align(), to make it clear that the
alignment is done with respect to the guest's base page size.
No functional change intended.
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260109082218.3236580-5-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The implementation of `page_align()` in `processor.c` calculates
alignment incorrectly for values that are already aligned. Specifically,
`(v + vm->page_size) & ~(vm->page_size - 1)` aligns to the *next* page
boundary even if `v` is already page-aligned, potentially wasting a page
of memory.
Fix the calculation to use standard alignment logic: `(v + vm->page_size
- 1) & ~(vm->page_size - 1)`.
Fixes: 3e06cdf10520 ("KVM: selftests: Add initial support for RISC-V 64-bit")
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260109082218.3236580-4-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The implementation of `page_align()` in `processor.c` calculates
alignment incorrectly for values that are already aligned. Specifically,
`(v + vm->page_size) & ~(vm->page_size - 1)` aligns to the *next* page
boundary even if `v` is already page-aligned, potentially wasting a page
of memory.
Fix the calculation to use standard alignment logic: `(v + vm->page_size
- 1) & ~(vm->page_size - 1)`.
Fixes: 7a6629ef746d ("kvm: selftests: add virt mem support for aarch64")
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260109082218.3236580-3-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM selftests map all guest code and data into the lower virtual address
range (0x0000...) managed by TTBR0_EL1. The upper range (0xFFFF...)
managed by TTBR1_EL1 is unused and uninitialized.
If a guest accesses the upper range, the MMU attempts a translation
table walk using uninitialized registers, leading to unpredictable
behavior.
Set `TCR_EL1.EPD1` to disable translation table walks for TTBR1_EL1,
ensuring that any access to the upper range generates an immediate
Translation Fault. Additionally, set `TCR_EL1.TBI1` (Top Byte Ignore) to
ensure that tagged pointers in the upper range also deterministically
trigger a Translation Fault via EPD1.
Define `TCR_EPD1_MASK`, `TCR_EPD1_SHIFT`, and `TCR_TBI1` in
`processor.h` to support this configuration. These are based on their
definitions in `arch/arm64/include/asm/pgtable-hwdef.h`.
Suggested-by: Will Deacon <will@kernel.org>
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260109082218.3236580-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Use LIST_HEAD() for initializing an on-stack list head in two places and
remove an empty code line added by mistake.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/12825056.O9o76ZdvQC@rafael.j.wysocki
|
|
After starting to use platform devices for representing buttons
enumerated via ACPI, acpi_mark_gpe_for_wake() is insufficient for
preparing their GPEs to wake up the system from sleep because it
does not change the "dispatch type" of the given GPE to
ACPI_GPE_DISPATCH_NOTIFY. Subsequently, this causes acpi_enable_gpe()
in __acpi_device_wakeup_enable() to fail and system suspend transitions
to be aborted.
Address this by updating acpi_wakeup_gpe_init() to use
acpi_setup_gpe_for_wake() for buttons like for any other devices.
This allows acpi_setup_gpe_for_wake() to be simplified further because
buttons are not a special case in it any more, so do that as well.
Fixes: 52d864019636 ("ACPI: button: Convert the driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/2259694.irdbgypaU6@rafael.j.wysocki
|
|
It is pointless to attach the generic ACPI PM domain to devices whose
ACPI companions don't support ACPI power management and don't have a
wakeup GPE, so update acpi_dev_pm_attach() to skip such devices.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5050298.GXAFRqVoOG@rafael.j.wysocki
|
|
Sadly, there is quite a bit of technical debt related to the
kernel's ACPI support subsystem and one of the most significant
pieces of it is the existence and use of ACPI drivers represented
by struct acpi_driver objects.
Those drivers are bound directly to struct acpi_device objects, also
referred to as "ACPI device nodes", representing device objects in the
ACPI namespace defined as:
A hierarchical tree structure in OS-controlled memory that contains
named objects. These objects may be data objects, control method
objects, bus/device package objects, and so on.
according to the ACPI specification [1].
The above definition implies, although rather indirectly, that the
objects in question don't really represent hardware. They are just
"device package objects" containing some information on the devices
present in the given platform that is known to the platform firmware.
Although the platform firmware can be the only source of information on
some devices, the information provided by it alone may be insufficient
for device enumeration in general. If that is the case, binding a
driver directly to a given ACPI device node clearly doesn't make sense.
If the device in question is enumerated through a hardware interface, it
will be represented by a device object matching that interface, like
a struct pci_dev, and the ACPI device node corresponding to it will be
treated as its "ACPI companions" whose role is to amend the "native"
enumeratiom mechanism.
For the sake of consistency and confusion avoidance, it is better to
treat ACPI device nodes in general as ACPI companions of other device
objects representing hardware. In some cases though it appeared easier
to take a shortcut and use an ACPI driver binding directly to an ACPI
device node. Moreover, there were corner cases in which that was the
only choice, but they all have been addressed now.
In all cases in which an ACPI driver might be used, the ACPI device
node it might bind to is an ACPI companion of another device object
representing a piece of hardware. It is thus better to use a driver
binding to the latter than to use an ACPI driver and leave the other
device object alone, not just because doing so is more consistent and
less confusing, but also because using ACPI drivers may lead to
potential functional deficiencies, like possible ordering issues
related to power management.
Unfortunately, there are quite a few ACPI drivers in use and, as a rule,
they bind to ACPI device nodes that are ACPI companions of platform
devices, so in fact they play the role of platform drivers although in
a kind of convoluted way. An effort has been under way to replace them
with platform drivers, which is relatively straightforward in the vast
majority of cases, but it has not been pursued very aggressively so far,
mostly due to the existence of the corner cases mentioned above.
However, since those corner cases are gone now, it makes sense to spend
more time on driver conversions with the ultimate goal to get rid of
struct acpi_driver and the related code from the kernel.
To that end, add a document explaining why using ACPI drivers is not
a good idea, so it need not be explained from scratch on every attempt
to convert an ACPI driver to a platform one.
Link: https://uefi.org/specs/ACPI/6.6/02_Definition_of_Terms.html#term-ACPI-Namespace [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/2396510.ElGaqSPkdT@rafael.j.wysocki
|
|
While binding drivers directly to struct acpi_device objects allows
basic functionality to be provided, at least in the majority of cases,
there are some problems with it, related to general consistency, sysfs
layout, power management operation ordering, and code cleanliness.
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ACPI video driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/1957556.tdWV9SEqCh@rafael.j.wysocki
|
|
Adjust acpi_video_bus_notify() to cast its "data" argument to a struct
acpi_video_bus pointer instead of a struct acpi_device one, which allows
the use of acpi_driver_data() to be limited and will facilitate
subsequent changes.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/2409089.ElGaqSPkdT@rafael.j.wysocki
|
|
ACPI device objects associated with backlight interfaces are special
because they are ACPI companions of PCI devices (GPUs), but the
interfaces exposed by them resemble platform device one.
Currently, the ACPI video driver binds to them with the help of a
special "synthetic" device ID regardless of the pairing with the PCI
devices, but since it is generally better to use platform drivers for
handling such interfaces, the plan is to convert that drviver into a
platform one.
However, for this purpose, platform devices corresponding to the
ACPI backlight device objects need to be registered, so update
acpi_bus_attach() to apply the default ACPI enumeration to them
and modify acpi_create_platform_device() to avoid bailing out early
if a "physical" device is already attached to a backlight ACPI device
object.
In addition, update acpi_companion_match() to return a valid struct
acpi_device pointer if the ACPI companion of the given device is a
backlight ACPI device object, which will facilitate driver matching
for platform devices corresponding to those objects.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/5081593.31r3eYUQgx@rafael.j.wysocki
|
|
The PCIe and USB TPHYs are under the soc bus, which provides MMIO,
and all nodes under that must use the bus, otherwise those would
clearly be out of place.
Add ranges to both the tphy(s) and assign the address to the main
node to silence a dtbs_check warning, and fix the children to
use the MMIO range of t-phy.
Fixes: ("f693e6ba55ae arm64: dts: mediatek: mt7988: Add t-phy for ssusb1")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The Khadas VIM1S uses the Amlogic S905Y4 SoC, based on the
Amlogic S4 SoC family, on a board with the same form factor as the
VIM/VIM2/VIM3/VIM4 models. Serial debug console, ethernet, SD card
work with this initial device tree.
It features:
- 2GB LPDDR4 RAM
- 16GB eMMC 5.1 storage
- 32MB SPI flash
- 100M Ethernet
- AP6256 Wireless (802.11 a/b/g/n/ac, BT5.0)
- HDMI 2.1 video
- 2x USB 2.0 ports
- 1x USB-C (power) with USB 2.0 OTG
- 2x LED's (1x red, 1x white)
- 3x buttons (power, function, reset)
- IR receiver
- 40pin GPIO Header
- 1x micro SD card slot
Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260115030015.1334517-4-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Update the compatible string for the Amlogic AQ222 board to include
the specific SoC compatible "amlogic,s805x2".
This aligns the device tree with the updated bindings which now
differentiate between S4 family members (S805X2 vs S905Y4).
Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260115030015.1334517-3-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The Amlogic S4 SoC family includes multiple variants, such as the S805X2
and S905Y4. Currently, the bindings only define the generic "amlogic,s4"
compatible.
This patch introduces specific compatibles "amlogic,s805x2" and
"amlogic,s905y4" to properly differentiate these SoCs while keeping
"amlogic,s4" as the family fallback.
This allows for more precise hardware description and future-proofing
if SoC-specific quirks arise.
Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260115030015.1334517-2-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
It is slightly better to deference the type being allocate for a sizeof
rather than manually using the type. Saves effort if types change in the
future. This results in no functional changes, just tidies up the style
of the code a little.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260115114607.271990-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
RK3588_PD_NPU initialize as GENPD_STATE_ON before regulator ready.
rknn_iommu initlized success and suspend RK3588_PD_NPU. When rocket
driver register, it will resume rknn_iommu.
If regulator is still not ready at this point, rknn_iommu resume fail,
pm runtime status will be error: -EPROBE_DEFER.
This patch set pmdomain to off if it need regulator during probe,
consumer device can power on pmdomain after regulator ready.
Signed-off-by: Frank Zhang <rmxpzlb@gmail.com>
Tested-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes: db6df2e3fc16 ("pmdomain: rockchip: add regulator support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The index of pages for dma address was changed wrongly. This commit
corrents it.
Fixes: ef6bdffbb88d ("firewire: core: stop using page private to store DMA mapping address")
Link: https://lore.kernel.org/r/20260114131729.16133-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
HP Omen 16-wf1xxx (board ID 8C78) currently sends the incorrect
Victus-specific thermal profile values via WMI, leading to a logical
inconsistency when switching between platform profiles.
The driver currently uses Victus S values:
0x00 => Balanced / Low-Power
0x01 => Performance
However, Omen Gaming Hub logs / EC register inspection on Windows shows
that this board is intended to use:
0x30 => Balanced / Low-Power
0x31 => Performance
This patch corrects the thermal profile command values to match the
values observed from Omen Gaming Hub logs. The performance benchmarks
and peak power draw (from both CPU and GPU) show no observable change
with this correction (suggesting that the firmware is currently tolerant
of the incorrect values). However sending the correct values prevents
potential regressions after future firmware updates.
Refactor victus_s_thermal_profile_boards from a list of strings to a
dmi_system_id table and move the lookup to module init. The new struct
thermal_profile_params is used to store board-specific WMI parameters,
allowing the driver to cache these values in a static pointer. This
avoids repeated DMI string comparisons and allows marking of DMI table as
__initconst.
Testing on HP Omen 16-wf1xxx (board 8C78) confirmed WMI codes 0x30/0x31
are now sent, resolving the logical inconsistency and ensuring the value
visible in EC registers match the Windows state for this profile.
Fixes: fb146a38cb11 ("platform/x86: hp-wmi: Add Omen 16-wf1xxx fan support")
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260113182604.115211-2-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The firmware on some HP laptops automatically reverts the fan speed
control to "Auto" mode after a 120 second timeout window.
To ensure that the user-selected fan profile (Max/Manual) persists,
implement a keep-alive mechanism that periodically refreshes the fan
mode trigger before the timeout occurs.
- Introduce a delayed workqueue to trigger the fan mode refresh every 90
seconds, ensuring the system maintains the correct fan mode setting.
- Integrate the refresh mechanism into hp_wmi_apply_fan_settings() to
start, update or cancel the keep-alive process based on the current
fan mode.
This ensures that the driver stays in sync with the hardware.
Tested on: HP Omen 16-wf1xxx (board ID 8C78)
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260113123738.222244-4-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add manual fan speed control and PWM reporting for HP Victus S-series
laptops.
While HPWMI_FAN_SPEED_SET_QUERY was previously added to reset max fan
mode, it is actually capable of individual fan control. This patch
implements hp_wmi_fan_speed_set() to allow manual control and hides
PWM inputs for non-Victus devices as the query is Victus specific.
The existing hp_wmi_fan_speed_max_get() query is unreliable on Victus S
firmware, often incorrectly reporting "Auto" mode even when "Max" is
active. To resolve this synchronization issue, move state tracking to
a per-device private context and apply "Auto" mode during driver
initialization to ensure a consistent starting point.
Refactor hp_wmi_apply_fan_settings() to use an intermediate ret
variable. This prepares the switch block for keep-alive logic being
added in a later patch, avoiding the need for duplicated mode check.
Tested on: HP Omen 16-wf1xxx (board ID 8C78)
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260113123738.222244-3-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
