| Age | Commit message (Collapse) | Author |
|
On 64bit arches, struct u64_stats_sync is empty and provides no help
against load/store tearing. memcpy() should not be considered atomic
against u64 values. Use u64_stats_copy() instead.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260120092137.2161162-5-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On 64bit arches, struct u64_stats_sync is empty and provides no help
against load/store tearing. memcpy() should not be considered atomic
against u64 values. Use u64_stats_copy() instead.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260120092137.2161162-4-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On 64bit arches, struct u64_stats_sync is empty and provides no help
against load/store tearing. memcpy() should not be considered atomic
against u64 values. Use u64_stats_copy() instead.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260120092137.2161162-3-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The following (anti-)pattern was observed in the code tree:
do {
start = u64_stats_fetch_begin(&pstats->syncp);
memcpy(&temp, &pstats->stats, sizeof(temp));
} while (u64_stats_fetch_retry(&pstats->syncp, start));
On 64bit arches, struct u64_stats_sync is empty and provides no help
against load/store tearing, especially for memcpy(), for which arches may
provide their highly-optimized implements.
In theory the affected code should convert to u64_stats_t, or use
READ_ONCE()/WRITE_ONCE() properly.
However since there are needs to copy chunks of statistics, instead of
writing loops at random places, we provide a safe memcpy() variant for
u64_stats.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260120092137.2161162-2-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mvpp2_ethtool_cls_rule_ins(), the ethtool_rule is allocated by
ethtool_rx_flow_rule_create(). If the subsequent conversion to flow
type fails, the function jumps to the clean_rule label.
However, the clean_rule label only frees efs, skipping the cleanup
of ethtool_rule, which leads to a memory leak.
Fix this by jumping to the clean_eth_rule label, which properly calls
ethtool_rx_flow_rule_destroy() before freeing efs.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: f4f1ba18195d ("net: mvpp2: cls: Report an error for unsupported flow types")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260123065716.2248324-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes two minor typos. Specifically, on -> or and Devices -> Device.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Link: https://patch.msgid.link/20260122225723.2368698-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since cited commit, core locks the net_device's rss_lock when handling
ethtool -x command, so driver's implementation should not lock it
again. Remove the latter.
Fixes: 040cef30b5e6 ("net: ethtool: move get_rxfh callback under the rss_lock")
Reported-by: Damir Mansurov <damir.mansurov@oktetlabs.ru>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1126015
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20260123161634.1215006-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-01-23
The first patch is by Zilin Guan and fixes a memory leak in the error
path of the at91_can driver's probe function.
The last patch is by me and fixes yet another error in the gs_usb's
gs_usb_receive_bulk_callback() function.
* tag 'linux-can-fixes-for-6.19-20260123' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: gs_usb: gs_usb_receive_bulk_callback(): fix error message
can: at91_can: Fix memory leak in at91_can_probe()
====================
Link: https://patch.msgid.link/20260123173241.1026226-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Only one core change, the rest are drivers.
The core change reorders some state operations in the error handler to
try to prevent missed wake ups of the error handler (which can halt
error processing and effectively freeze the entire system)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Sanitize payload size to prevent member overflow
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
scsi: target: iscsi: Fix use-after-free in iscsit_dec_conn_usage_count()
scsi: core: Wake up the error handler when final completions race against each other
scsi: storvsc: Process unsupported MODE_SENSE_10
scsi: xen: scsiback: Fix potential memory leak in scsiback_remove()
|
|
Replace unsafe core::mem::zeroed() with pin_init::zeroed() for
file_operations initialization in all debugfs file operation
implementations.
Suggested-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Ke Sun <sunke@kylinos.cn>
Link: https://github.com/Rust-for-Linux/linux/issues/1189
Link: https://patch.msgid.link/20260120083824.477339-5-sunke@kylinos.cn
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys fix from Jarkko Sakkinen.
* tag 'keys-trusted-next-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
keys/trusted_keys: fix handle passed to tpm_buf_append_name during unseal
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio driver fixes from Greg KH:
"Here are some small char/misc/iio and some other minor driver
subsystem fixes for 6.19-rc7. Nothing huge here, just some fixes for
reported issues including:
- lots of little iio driver fixes
- comedi driver fixes
- mux driver fix
- w1 driver fixes
- uio driver fix
- slimbus driver fixes
- hwtracing bugfix
- other tiny bugfixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
comedi: dmm32at: serialize use of paged registers
mei: trace: treat reg parameter as string
uio: pci_sva: correct '-ENODEV' check logic
uacce: ensure safe queue release with state management
uacce: implement mremap in uacce_vm_ops to return -EPERM
uacce: fix isolate sysfs check condition
uacce: fix cdev handling in the cleanup path
slimbus: core: clean up of_slim_get_device()
slimbus: core: fix of_slim_get_device() kernel doc
slimbus: core: amend slim_get_device() kernel doc
slimbus: core: fix device reference leak on report present
slimbus: core: fix runtime PM imbalance on report present
slimbus: core: fix OF node leak on registration failure
intel_th: rename error label
intel_th: fix device leak on output open()
comedi: Fix getting range information for subdevices 16 to 255
mux: mmio: Fix IS_ERR() vs NULL check in probe()
interconnect: debugfs: initialize src_node and dst_node to empty strings
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
iio: accel: iis328dq: fix gain values
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are three small serial driver fixes for 6.19-rc7 that resolve
some reported issues. They include:
- tty->port race condition fix for a reported problem
- qcom_geni serial driver fix
- 8250_pci serial driver fix
All of these have been in linux-next with no reported issues"
* tag 'tty-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: Fix not set tty->port race condition
serial: 8250_pci: Fix broken RS485 for F81504/508/512
serial: qcom_geni: Fix BT failure regression on RB2 platform
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
- k1: drop wrong IRQF_ONESHOT from IRQ request to fix genirq warning
* tag 'i2c-for-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: spacemit: drop IRQF_ONESHOT flag from IRQ request
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a couple of quirks to i8042 to enable keyboard on a Asus and MECHREVO
laptops
* tag 'input-for-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add quirks for MECHREVO Wujie 15X Pro
Input: i8042 - add quirk for ASUS Zenbook UX425QA_UM425QA
|
|
A new utility metadata_size was added in
commit 261b67f4e347 ("selftests: ublk: add utility to get block device metadata size")
but it was not added to .gitignore. Fix that by adding it there.
While at it sort all entries alphabetically and add a SPDX license header.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 261b67f4e347 ("selftests: ublk: add utility to get block device metadata size")
Signed-off-by: Alexander Atanasov <alex@zazolabs.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For potential long term allocations, ensure that we play nicer with
memcg and use the accounting variant of the GFP_KERNEL allocation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Be a bit nicer and ensure it plays nice with memcg accounting.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
TPM2_Unseal[1] expects the handle of a loaded data object, and not the
handle of the parent key. But the tpm2_unseal_cmd provides the parent
keyhandle instead of blob_handle for the session HMAC calculation. This
causes unseal to fail.
Fix this by passing blob_handle to tpm_buf_append_name().
References:
[1] trustedcomputinggroup.org/wp-content/uploads/
Trusted-Platform-Module-2.0-Library-Part-3-Version-184_pub.pdf
Fixes: 6e9722e9a7bf ("tpm2-sessions: Fix out of range indexing in name_size")
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Changwoo Min says:
====================
selftests/bpf: Introduce execution context detection helpers
This series introduces four new BPF-native inline helpers -- bpf_in_nmi(),
bpf_in_hardirq(), bpf_in_serving_softirq(), and bpf_in_task() -- to allow
BPF programs to query the current execution context.
Following the feedback on v1, these are implemented in bpf_experimental.h
as inline helpers wrapping get_preempt_count(). This approach allows the
logic to be JIT-inlined for better performance compared to a kfunc call,
while providing the granular context detection (e.g., hardirq vs. softirq)
required by subsystems like sched_ext.
The series includes a new selftest suite, exe_ctx, which uses bpf_testmod
to verify context detection across Task, HardIRQ, and SoftIRQ boundaries
via irq_work and tasklets. NMI context testing is omitted as NMIs cannot
be triggered deterministically within software-only BPF CI environments.
ChangeLog v2 -> v3:
- Added exe_ctx to DENYLIST.s390x since new helpers are supported only
on x86 and arm64 (patch 2).
- Added comments to helpers describing supported architectures (patch 1).
ChangeLog v1 -> v2:
- Dropped the core kernel kfunc implementations, and implemented context
detection as inline BPF helpers in bpf_experimental.h.
- Renamed the selftest suite from ctx_kfunc to exe_ctx to reflect the
change from kfuncs to helpers.
- Updated BPF programs to use the new inline helpers.
- Swapped clean-up order between tasklet and irqwork in bpf_testmod to
avoid re-scheduling the already-killed tasklet (reported by bot+bpf-ci).
====================
Link: https://patch.msgid.link/20260125115413.117502-1-changwoo@igalia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a new selftest suite `exe_ctx` to verify the accuracy of the
bpf_in_task(), bpf_in_hardirq(), and bpf_in_serving_softirq() helpers
introduced in bpf_experimental.h.
Testing these execution contexts deterministically requires crossing
context boundaries within a single CPU. To achieve this, the test
implements a "Trigger-Observer" pattern using bpf_testmod:
1. Trigger: A BPF syscall program calls a new bpf_testmod kfunc
bpf_kfunc_trigger_ctx_check().
2. Task to HardIRQ: The kfunc uses irq_work_queue() to trigger a
self-IPI on the local CPU.
3. HardIRQ to SoftIRQ: The irq_work handler calls a dummy function
(observed by BPF fentry) and then schedules a tasklet to
transition into SoftIRQ context.
The user-space runner ensures determinism by pinning itself to CPU 0
before execution, forcing the entire interrupt chain to remain on a
single core. Dummy noinline functions with compiler barriers are
added to bpf_testmod.c to serve as stable attachment points for
fentry programs. A retry loop is used in user-space to wait for the
asynchronous SoftIRQ to complete.
Note that testing on s390x is avoided because supporting those helpers
purely in BPF on s390x is not possible at this point.
Reviewed-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Link: https://lore.kernel.org/r/20260125115413.117502-3-changwoo@igalia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce bpf_in_nmi(), bpf_in_hardirq(), bpf_in_serving_softirq(), and
bpf_in_task() inline helpers in bpf_experimental.h. These allow BPF
programs to query the current execution context with higher granularity
than the existing bpf_in_interrupt() helper.
While BPF programs can often infer their context from attachment points,
subsystems like sched_ext may call the same BPF logic from multiple
contexts (e.g., task-to-task wake-ups vs. interrupt-to-task wake-ups).
These helpers provide a reliable way for logic to branch based on
the current CPU execution state.
Implementing these as BPF-native inline helpers wrapping
get_preempt_count() allows the compiler and JIT to inline the logic. The
implementation accounts for differences in preempt_count layout between
standard and PREEMPT_RT kernels.
Reviewed-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Link: https://lore.kernel.org/r/20260125115413.117502-2-changwoo@igalia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Restore PAGE_S2_MEMATTR() to its former glory, keeping the use of
FWB as an implementation detail.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260123191637.715429-6-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Nobody is using this flag anymore, so remove it. This allows
some cleanup by removing stage2_has_fwb(), which is can be replaced
by a direct check on the capability.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260123191637.715429-5-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Since we have the basics to use the S1 memory attributes as the
final ones with FWB, flip the host over to that when FWB is present.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260123191637.715429-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Plumb the MT_S2{,_FWB}_AS_S1 memory types into the KVM_S2_MEMATTR()
macro with a new KVM_PGTABLE_S2_AS_S1 flag.
Nobody selects it yet.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260123191637.715429-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
pKVM usage of S2 translation on the host is purely for isolation
purposes, not translation. To that effect, the memory attributes
being used must be that of S1.
With FWB=0, this is easily achieved by using the Normal Cacheable
type (which is the weakest possible memory type) at S2, and let S1
pick something stronger as required.
With FWB=1, the attributes are combined in a different way, and we
cannot arbitrarily use Normal Cacheable. We can, however, use a
memattr encoding that indicates that the final attributes are that
of Stage-1.
Add these encoding and a few pointers to the relevant parts of the
specification. It might come handy some day.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260123191637.715429-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The hardware allows for an opaque CQ context field to be carried
over into CEQEs for the CQ. Previously, a pointer to the CQ was used
for this context. In the normal CQ destroy flow, the CEQ ring is
scrubbed to remove any preexisting CEQEs for the CQ that may not have
been processed yet so that the CQ structure is not dereferenced in the
CEQ ISR after the CQ has been freed.
However, in some cases, it is possible for a CEQE to be in flight in
HW even after the CQ destroy command completion is received, so it
could be missed during the scrub.
To protect against this, we can take advantage of the CQ table that
already exists and use the CQ ID for this context rather than a CQ
pointer.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260120212546.1893076-2-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Added definitions for the special reserved CQs and QPs.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260120212546.1893076-1-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The current implementation incorrectly handles memory regions (MRs) with
page sizes different from the system PAGE_SIZE. The core issue is that
rxe_set_page() is called with mr->page_size step increments, but the
page_list stores individual struct page pointers, each representing
PAGE_SIZE of memory.
ib_sg_to_page() has ensured that when i>=1 either
a) SG[i-1].dma_end and SG[i].dma_addr are contiguous
or
b) SG[i-1].dma_end and SG[i].dma_addr are mr->page_size aligned.
This leads to incorrect iova-to-va conversion in scenarios:
1) page_size < PAGE_SIZE (e.g., MR: 4K, system: 64K):
ibmr->iova = 0x181800
sg[0]: dma_addr=0x181800, len=0x800
sg[1]: dma_addr=0x173000, len=0x1000
Access iova = 0x181800 + 0x810 = 0x182010
Expected VA: 0x173010 (second SG, offset 0x10)
Before fix:
- index = (0x182010 >> 12) - (0x181800 >> 12) = 1
- page_offset = 0x182010 & 0xFFF = 0x10
- xarray[1] stores system page base 0x170000
- Resulting VA: 0x170000 + 0x10 = 0x170010 (wrong)
2) page_size > PAGE_SIZE (e.g., MR: 64K, system: 4K):
ibmr->iova = 0x18f800
sg[0]: dma_addr=0x18f800, len=0x800
sg[1]: dma_addr=0x170000, len=0x1000
Access iova = 0x18f800 + 0x810 = 0x190010
Expected VA: 0x170010 (second SG, offset 0x10)
Before fix:
- index = (0x190010 >> 16) - (0x18f800 >> 16) = 1
- page_offset = 0x190010 & 0xFFFF = 0x10
- xarray[1] stores system page for dma_addr 0x170000
- Resulting VA: system page of 0x170000 + 0x10 = 0x170010 (wrong)
Yi Zhang reported a kernel panic[1] years ago related to this defect.
Solution:
1. Replace xarray with pre-allocated rxe_mr_page array for sequential
indexing (all MR page indices are contiguous)
2. Each rxe_mr_page stores both struct page* and offset within the
system page
3. Handle MR page_size != PAGE_SIZE relationships:
- page_size > PAGE_SIZE: Split MR pages into multiple system pages
- page_size <= PAGE_SIZE: Store offset within system page
4. Add boundary checks and compatibility validation
This ensures correct iova-to-va conversion regardless of MR page size
and system PAGE_SIZE relationship, while improving performance through
array-based sequential access.
Tests on 4K and 64K PAGE_SIZE hosts:
- rdma-core/pytests
$ ./build/bin/run_tests.py --dev eth0_rxe
- blktest:
$ TIMEOUT=30 QUICK_RUN=1 USE_RXE=1 NVMET_TRTYPES=rdma ./check nvme srp rnbd
[1] https://lore.kernel.org/all/CAHj4cs9XRqE25jyVw9rj9YugffLn5+f=1znaBEnu1usLOciD+g@mail.gmail.com/T/
Fixes: 592627ccbdff ("RDMA/rxe: Replace rxe_map and rxe_phys_buf by xarray")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://patch.msgid.link/20260116032753.2574363-1-lizhijian@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The MECHREVO Wujie 15X Pro requires several i8042 quirks to function
correctly. Specifically, NOMUX, RESET_ALWAYS, NOLOOP, and NOPNP are
needed to ensure the keyboard and touchpad work reliably.
Signed-off-by: gongqi <550230171hxy@gmail.com>
Link: https://patch.msgid.link/20260122155501.376199-3-550230171hxy@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The ASUS Zenbook UX425QA_UM425QA fails to initialize the keyboard after
a cold boot.
A quirk already exists for "ZenBook UX425", but some Zenbooks report
"Zenbook" with a lowercase 'b'. Since DMI matching is case-sensitive,
the existing quirk is not applied to these "extra special" Zenbooks.
Testing confirms that this model needs the same quirks as the ZenBook
UX425 variants.
Signed-off-by: feng <alec.jiang@gmail.com>
Link: https://patch.msgid.link/20260122013957.11184-1-alec.jiang@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The wake_type parameter from touchscreen registers is not used for
anything functional - the driver only validates that it matches a
hard-coded expected value per chip variant. This causes probe to fail
on touchscreens that report a different wake_type despite being
otherwise compatible.
Drop the wake_type check and the associated chip data member to allow
the existing compatibles to work with more touchscreen variants.
Signed-off-by: Gianluca Boiano <morf3089@gmail.com>
Suggested-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20260122001040.76869-1-morf3089@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The tsc2007 can be used not only as resistive touchscreen controller but
also as a ADC IIO sensor. The second use case requires '#io-channel-cells'
property, hence add it.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260122193549.29858-2-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"The notable changes here are the three RISC-V timer compare register
update sequence patches. These only apply to RV32 systems and are
related to the 64-bit timer compare value being split across two
separate 32-bit registers.
We weren't using the appropriate three-write sequence, documented in
the RISC-V ISA specifications, to avoid spurious timer interrupts
during the update sequence; so, these patches now use the recommended
sequence.
This doesn't affect 64-bit RISC-V systems, since the timer compare
value fits inside a single register and can be updated with a single
write.
- Fix the RISC-V timer compare register update sequence on RV32
systems to use the recommended sequence in the RISC-V ISA manual
This avoids spurious interrupts during updates
- Add a dependence on the new CONFIG_CACHEMAINT_FOR_DMA Kconfig
symbol for Renesas and StarFive RISC-V SoCs
- Add a temporary workaround for a Clang compiler bug caused by using
asm_goto_output for get_user()
- Clarify our documentation to specifically state a particular ISA
specification version for a chapter number reference"
* tag 'riscv-for-linus-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add intermediate cast to 'unsigned long' in __get_user_asm
riscv: Use 64-bit variable for output in __get_user_asm
soc: renesas: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: ERRATA_STARFIVE_JH7100: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: suspend: Fix stimecmp update hazard on RV32
riscv: kvm: Fix vstimecmp update hazard on RV32
riscv: clocksource: Fix stimecmp update hazard on RV32
Documentation: riscv: uabi: Clarify ISA spec version for canonical order
|
|
Menglong Dong says:
====================
bpf: fsession support
overall
-------
Sometimes, we need to hook both the entry and exit of a function with
TRACING. Therefore, we need define a FENTRY and a FEXIT for the target
function, which is not convenient.
Therefore, we add a tracing session support for TRACING. Generally
speaking, it's similar to kprobe session, which can hook both the entry
and exit of a function with a single BPF program.
We allow the usage of bpf_get_func_ret() to get the return value in the
fentry of the tracing session, as it will always get "0", which is safe
enough and is OK.
Session cookie is also supported with the kfunc bpf_session_cookie().
In order to limit the stack usage, we limit the maximum number of cookies
to 4.
kfunc design
------------
In order to keep consistency with existing kfunc, we don't introduce new
kfunc for fsession. Instead, we reuse the existing kfunc
bpf_session_cookie() and bpf_session_is_return().
The prototype of bpf_session_cookie() and bpf_session_is_return() don't
satisfy our needs, so we change their prototype by adding the argument
"void *ctx" to them.
We inline bpf_session_cookie() and bpf_session_is_return() for fsession
in the verifier directly. Therefore, we don't need to introduce new
functions for them.
architecture
------------
The fsession stuff is arch related, so the -EOPNOTSUPP will be returned if
it is not supported yet by the arch. In this series, we only support
x86_64. And later, other arch will be implemented.
Changes v12 -> v13:
* fix the selftests fail on !x86_64 in the 11th patch
* v12: https://lore.kernel.org/bpf/20260124033119.28682-1-dongml2@chinatelecom.cn/
Changes v11 -> v12:
* update the variable "delta" in the 2nd patch
* improve the fsession testcase by adding the 11th patch, which will test
bpf_get_func_* for fsession
* v11: https://lore.kernel.org/bpf/20260123073532.238985-1-dongml2@chinatelecom.cn/
Changes v10 -> v11:
* rebase and fix the conflicts in the 2nd patch
* use "volatile" in the 11th patch
* rename BPF_TRAMP_SHIFT_* to BPF_TRAMP_*_SHIFT
* v10: https://lore.kernel.org/bpf/20260115112246.221082-1-dongml2@chinatelecom.cn/
Changes v9 -> v10:
* 1st patch: some small adjustment, such as use switch in
bpf_prog_has_trampoline()
* 2nd patch: some adjustment to the commit log and comment
* 3rd patch:
- drop the declaration of bpf_session_is_return() and
bpf_session_cookie()
- use vmlinux.h instead of bpf_kfuncs.h in uprobe_multi_session.c,
kprobe_multi_session_cookie.c and uprobe_multi_session_cookie.c
* 4th patch:
- some adjustment to the comment and commit log
- rename the prefix from BPF_TRAMP_M_ to BPF_TRAMP_SHIFT_
- remove the definition of BPF_TRAMP_M_NR_ARGS
- check the program type in bpf_session_filter()
* 5th patch: some adjustment to the commit log
* 6th patch:
- add the "reg" to the function arguments of emit_store_stack_imm64()
- use the positive offset in emit_store_stack_imm64()
* 7th patch:
- use "|" for func_meta instead of "+"
- pass the "func_meta_off" to invoke_bpf() explicitly, instead of
computing it with "stack_size + 8"
- pass the "cookie_off" to invoke_bpf() instead of computing the current
cookie index with "func_meta"
* 8th patch:
- split the modification to bpftool to a separate patch
* v9: https://lore.kernel.org/bpf/20260110141115.537055-1-dongml2@chinatelecom.cn/
Changes v8 -> v9:
* remove the definition of bpf_fsession_cookie and bpf_fsession_is_return
in the 4th and 5th patch
* rename emit_st_r0_imm64() to emit_store_stack_imm64() in the 6th patch
* v8: https://lore.kernel.org/bpf/20260108022450.88086-1-dongml2@chinatelecom.cn/
Changes v7 -> v8:
* use the last byte of nr_args for bpf_get_func_arg_cnt() in the 2nd patch
* v7: https://lore.kernel.org/bpf/20260107064352.291069-1-dongml2@chinatelecom.cn/
Changes v6 -> v7:
* change the prototype of bpf_session_cookie() and bpf_session_is_return(),
and reuse them instead of introduce new kfunc for fsession.
* v6: https://lore.kernel.org/bpf/20260104122814.183732-1-dongml2@chinatelecom.cn/
Changes v5 -> v6:
* No changes in this version, just a rebase to deal with conflicts.
* v5: https://lore.kernel.org/bpf/20251224130735.201422-1-dongml2@chinatelecom.cn/
Changes v4 -> v5:
* use fsession terminology consistently in all patches
* 1st patch:
- use more explicit way in __bpf_trampoline_link_prog()
* 4th patch:
- remove "cookie_cnt" in struct bpf_trampoline
* 6th patch:
- rename nr_regs to func_md
- define cookie_off in a new line
* 7th patch:
- remove the handling of BPF_TRACE_SESSION in legacy fallback path for
BPF_RAW_TRACEPOINT_OPEN
* v4: https://lore.kernel.org/bpf/20251217095445.218428-1-dongml2@chinatelecom.cn/
Changes v3 -> v4:
* instead of adding a new hlist to progs_hlist in trampoline, add the bpf
program to both the fentry hlist and the fexit hlist.
* introduce the 2nd patch to reuse the nr_args field in the stack to
store all the information we need(except the session cookies).
* limit the maximum number of cookies to 4.
* remove the logic to skip fexit if the fentry return non-zero.
* v3: https://lore.kernel.org/bpf/20251026030143.23807-1-dongml2@chinatelecom.cn/
Changes v2 -> v3:
* squeeze some patches:
- the 2 patches for the kfunc bpf_tracing_is_exit() and
bpf_fsession_cookie() are merged into the second patch.
- the testcases for fsession are also squeezed.
* fix the CI error by move the testcase for bpf_get_func_ip to
fsession_test.c
* v2: https://lore.kernel.org/bpf/20251022080159.553805-1-dongml2@chinatelecom.cn/
Changes v1 -> v2:
* session cookie support.
In this version, session cookie is implemented, and the kfunc
bpf_fsession_cookie() is added.
* restructure the layout of the stack.
In this version, the session stuff that stored in the stack is changed,
and we locate them after the return value to not break
bpf_get_func_ip().
* testcase enhancement.
Some nits in the testcase that suggested by Jiri is fixed. Meanwhile,
the testcase for get_func_ip and session cookie is added too.
* v1: https://lore.kernel.org/bpf/20251018142124.783206-1-dongml2@chinatelecom.cn/
====================
Link: https://patch.msgid.link/20260124062008.8657-1-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test the fsession when it is used together with fentry, fexit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260124062008.8657-14-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test session cookie for fsession. Multiple fsession BPF progs is attached
to bpf_fentry_test1() and session cookie is read and write in the
testcase.
bpf_get_func_ip() will influence the layout of the session cookies, so we
test the cookie in two case: with and without bpf_get_func_ip().
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260124062008.8657-13-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test following bpf helper for fsession:
bpf_get_func_arg()
bpf_get_func_arg_cnt()
bpf_get_func_ret()
bpf_get_func_ip()
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260124062008.8657-12-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add testcases for BPF_TRACE_FSESSION. The function arguments and return
value are tested both in the entry and exit. And the kfunc
bpf_session_is_ret() is also tested.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260124062008.8657-11-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add BPF_TRACE_FSESSION to bpftool.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260124062008.8657-10-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add BPF_TRACE_FSESSION to libbpf.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260124062008.8657-9-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add BPF_TRACE_FSESSION supporting to x86_64, including:
1. clear the return value in the stack before fentry to make the fentry
of the fsession can only get 0 with bpf_get_func_ret().
2. clear all the session cookies' value in the stack.
2. store the index of the cookie to ctx[-1] before the calling to fsession
3. store the "is_return" flag to ctx[-1] before the calling to fexit of
the fsession.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Co-developed-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260124062008.8657-8-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce the helper emit_store_stack_imm64(), which is used to store a
imm64 to the stack with the help of a register.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260124062008.8657-7-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement session cookie for fsession. The session cookies will be stored
in the stack, and the layout of the stack will look like this:
return value -> 8 bytes
argN -> 8 bytes
...
arg1 -> 8 bytes
nr_args -> 8 bytes
ip (optional) -> 8 bytes
cookie2 -> 8 bytes
cookie1 -> 8 bytes
The offset of the cookie for the current bpf program, which is in 8-byte
units, is stored in the
"(((u64 *)ctx)[-1] >> BPF_TRAMP_COOKIE_INDEX_SHIFT) & 0xFF". Therefore, we
can get the session cookie with ((u64 *)ctx)[-offset].
Implement and inline the bpf_session_cookie() for the fsession in the
verifier.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260124062008.8657-6-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If fsession exists, we will use the bit (1 << BPF_TRAMP_IS_RETURN_SHIFT)
in ((u64 *)ctx)[-1] to store the "is_return" flag.
The logic of bpf_session_is_return() for fsession is implemented in the
verifier by inline following code:
bool bpf_session_is_return(void *ctx)
{
return (((u64 *)ctx)[-1] >> BPF_TRAMP_IS_RETURN_SHIFT) & 1;
}
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Co-developed-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260124062008.8657-5-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the function argument of "void *ctx" to bpf_session_cookie() and
bpf_session_is_return(), which is a preparation of the next patch.
The two kfunc is seldom used now, so it will not introduce much effect
to change their function prototype.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20260124062008.8657-4-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For now, ((u64 *)ctx)[-1] is used to store the nr_args in the trampoline.
However, 1 byte is enough to store such information. Therefore, we use
only the least significant byte of ((u64 *)ctx)[-1] to store the nr_args,
and reserve the rest for other usages.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260124062008.8657-3-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The fsession is something that similar to kprobe session. It allow to
attach a single BPF program to both the entry and the exit of the target
functions.
Introduce the struct bpf_fsession_link, which allows to add the link to
both the fentry and fexit progs_hlist of the trampoline.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Co-developed-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260124062008.8657-2-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull NTB fix from Jon Mason:
"Bug fix for uninitialized mutex in ntb transport"
* tag 'ntb-6.19-bugfixes' of https://github.com/jonmason/ntb:
ntb: transport: Fix uninitialized mutex
|