| Age | Commit message (Collapse) | Author |
|---|
|
When there is a missed beacon scenario its
not clear how many times beacon missed,
log this data.
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250826184046.70366c88907e.I39b5c121f9884cd572a19bf89f7cca02ce79eb33@changeid
|
|
Update iwl_poll_prph_bit to return 0 on success or an error code.
Remove timing information from the return value, as it is unused.
Signed-off-by: Itamar Shalev <itamar.shalev@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250826184046.6d5444d553ce.I769146e3ba78e12ccd014b4692492df6aea17ca1@changeid
|
|
Refactor finish_nic_init by moving its logic to the gen1_2 transport
layer.
Prepares for future gen3 support.
Signed-off-by: Itamar Shalev <itamar.shalev@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250826184046.9fcc48d81435.I13403938219765b79c299ea081e8373d0e007785@changeid
|
|
When beacon loss happens or the RSSI drops, trigger MLO scan only
if not in EMLSR. The link switch was meant to be done when we are
not in EMLSR and we can try to switch to a better link.
If in EMLSR, we exit first and then trigger MLO scan.
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250826184046.f6ae8e3882cf.I60901c16487371b8e62019bd0bf25c45ab23752f@changeid
|
|
On resume, we are iterating all the keys in order to update the PN.
Currently we check the cipher of the key we are currently iterating on
to decide whether the key is PTK, GTK, IGTK or BIGTK.
But we can find the type of the key by the keyidx, and we anyway have to
check the keyidx, so just remove the cipher switch case and check only
the keyidx instead
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250826184046.8c4f9c30242c.Ie34c200f321aae60771476fa9907c333a8a99747@changeid
|
|
Observed on kernel 6.6 (present on master as well):
BUG: KASAN: slab-out-of-bounds in memcmp+0x98/0xd0
Call trace:
kasan_check_range+0xe8/0x190
__asan_loadN+0x1c/0x28
memcmp+0x98/0xd0
efivarfs_d_compare+0x68/0xd8
__d_lookup_rcu_op_compare+0x178/0x218
__d_lookup_rcu+0x1f8/0x228
d_alloc_parallel+0x150/0x648
lookup_open.isra.0+0x5f0/0x8d0
open_last_lookups+0x264/0x828
path_openat+0x130/0x3f8
do_filp_open+0x114/0x248
do_sys_openat2+0x340/0x3c0
__arm64_sys_openat+0x120/0x1a0
If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can become
negative, leadings to oob. The issue can be triggered by parallel
lookups using invalid filename:
T1 T2
lookup_open
->lookup
simple_lookup
d_add
// invalid dentry is added to hash list
lookup_open
d_alloc_parallel
__d_lookup_rcu
__d_lookup_rcu_op_compare
hlist_bl_for_each_entry_rcu
// invalid dentry can be retrieved
->d_compare
efivarfs_d_compare
// oob
Fix it by checking 'guid' before cmp.
Fixes: da27a24383b2 ("efivarfs: guid part of filenames are case-insensitive")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to ensure
page tables are properly synchronized when calling p*d_populate_kernel().
For 5-level paging, synchronization is performed via
pgd_populate_kernel(). In 4-level paging, pgd_populate() is a no-op, so
synchronization is instead performed at the P4D level via
p4d_populate_kernel().
This fixes intermittent boot failures on systems using 4-level paging and
a large amount of persistent memory:
BUG: unable to handle page fault for address: ffffe70000000034
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP NOPTI
RIP: 0010:__init_single_page+0x9/0x6d
Call Trace:
<TASK>
__init_zone_device_page+0x17/0x5d
memmap_init_zone_device+0x154/0x1bb
pagemap_range+0x2e0/0x40f
memremap_pages+0x10b/0x2f0
devm_memremap_pages+0x1e/0x60
dev_dax_probe+0xce/0x2ec [device_dax]
dax_bus_probe+0x6d/0xc9
[... snip ...]
</TASK>
It also fixes a crash in vmemmap_set_pmd() caused by accessing vmemmap
before sync_global_pgds() [1]:
BUG: unable to handle page fault for address: ffffeb3ff1200000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI
Tainted: [W]=WARN
RIP: 0010:vmemmap_set_pmd+0xff/0x230
<TASK>
vmemmap_populate_hugepages+0x176/0x180
vmemmap_populate+0x34/0x80
__populate_section_memmap+0x41/0x90
sparse_add_section+0x121/0x3e0
__add_pages+0xba/0x150
add_pages+0x1d/0x70
memremap_pages+0x3dc/0x810
devm_memremap_pages+0x1c/0x60
xe_devm_add+0x8b/0x100 [xe]
xe_tile_init_noalloc+0x6a/0x70 [xe]
xe_device_probe+0x48c/0x740 [xe]
[... snip ...]
Link: https://lkml.kernel.org/r/20250818020206.4517-4-harry.yoo@oracle.com
Fixes: 8d400913c231 ("x86/vmemmap: handle unpopulated sub-pmd ranges")
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Closes: https://lore.kernel.org/linux-mm/20250311114420.240341-1-gwan-gyeong.mun@intel.com [1]
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kiryl Shutsemau <kas@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: bibo mao <maobibo@loongson.cn>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Huth <thuth@redhat.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce and use {pgd,p4d}_populate_kernel() in core MM code when
populating PGD and P4D entries for the kernel address space. These
helpers ensure proper synchronization of page tables when updating the
kernel portion of top-level page tables.
Until now, the kernel has relied on each architecture to handle
synchronization of top-level page tables in an ad-hoc manner. For
example, see commit 9b861528a801 ("x86-64, mem: Update all PGDs for direct
mapping and vmemmap mapping changes").
However, this approach has proven fragile for following reasons:
1) It is easy to forget to perform the necessary page table
synchronization when introducing new changes.
For instance, commit 4917f55b4ef9 ("mm/sparse-vmemmap: improve memory
savings for compound devmaps") overlooked the need to synchronize
page tables for the vmemmap area.
2) It is also easy to overlook that the vmemmap and direct mapping areas
must not be accessed before explicit page table synchronization.
For example, commit 8d400913c231 ("x86/vmemmap: handle unpopulated
sub-pmd ranges")) caused crashes by accessing the vmemmap area
before calling sync_global_pgds().
To address this, as suggested by Dave Hansen, introduce _kernel() variants
of the page table population helpers, which invoke architecture-specific
hooks to properly synchronize page tables. These are introduced in a new
header file, include/linux/pgalloc.h, so they can be called from common
code.
They reuse existing infrastructure for vmalloc and ioremap.
Synchronization requirements are determined by ARCH_PAGE_TABLE_SYNC_MASK,
and the actual synchronization is performed by
arch_sync_kernel_mappings().
This change currently targets only x86_64, so only PGD and P4D level
helpers are introduced. Currently, these helpers are no-ops since no
architecture sets PGTBL_{PGD,P4D}_MODIFIED in ARCH_PAGE_TABLE_SYNC_MASK.
In theory, PUD and PMD level helpers can be added later if needed by other
architectures. For now, 32-bit architectures (x86-32 and arm) only handle
PGTBL_PMD_MODIFIED, so p*d_populate_kernel() will never affect them unless
we introduce a PMD level helper.
[harry.yoo@oracle.com: fix KASAN build error due to p*d_populate_kernel()]
Link: https://lkml.kernel.org/r/20250822020727.202749-1-harry.yoo@oracle.com
Link: https://lkml.kernel.org/r/20250818020206.4517-3-harry.yoo@oracle.com
Fixes: 8d400913c231 ("x86/vmemmap: handle unpopulated sub-pmd ranges")
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kiryl Shutsemau <kas@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: bibo mao <maobibo@loongson.cn>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Huth <thuth@redhat.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
During our internal testing, we started observing intermittent boot
failures when the machine uses 4-level paging and has a large amount of
persistent memory:
BUG: unable to handle page fault for address: ffffe70000000034
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP NOPTI
RIP: 0010:__init_single_page+0x9/0x6d
Call Trace:
<TASK>
__init_zone_device_page+0x17/0x5d
memmap_init_zone_device+0x154/0x1bb
pagemap_range+0x2e0/0x40f
memremap_pages+0x10b/0x2f0
devm_memremap_pages+0x1e/0x60
dev_dax_probe+0xce/0x2ec [device_dax]
dax_bus_probe+0x6d/0xc9
[... snip ...]
</TASK>
It turns out that the kernel panics while initializing vmemmap (struct
page array) when the vmemmap region spans two PGD entries, because the new
PGD entry is only installed in init_mm.pgd, but not in the page tables of
other tasks.
And looking at __populate_section_memmap():
if (vmemmap_can_optimize(altmap, pgmap))
// does not sync top level page tables
r = vmemmap_populate_compound_pages(pfn, start, end, nid, pgmap);
else
// sync top level page tables in x86
r = vmemmap_populate(start, end, nid, altmap);
In the normal path, vmemmap_populate() in arch/x86/mm/init_64.c
synchronizes the top level page table (See commit 9b861528a801 ("x86-64,
mem: Update all PGDs for direct mapping and vmemmap mapping changes")) so
that all tasks in the system can see the new vmemmap area.
However, when vmemmap_can_optimize() returns true, the optimized path
skips synchronization of top-level page tables. This is because
vmemmap_populate_compound_pages() is implemented in core MM code, which
does not handle synchronization of the top-level page tables. Instead,
the core MM has historically relied on each architecture to perform this
synchronization manually.
We're not the first party to encounter a crash caused by not-sync'd top
level page tables: earlier this year, Gwan-gyeong Mun attempted to address
the issue [1] [2] after hitting a kernel panic when x86 code accessed the
vmemmap area before the corresponding top-level entries were synced. At
that time, the issue was believed to be triggered only when struct page
was enlarged for debugging purposes, and the patch did not get further
updates.
It turns out that current approach of relying on each arch to handle the
page table sync manually is fragile because 1) it's easy to forget to sync
the top level page table, and 2) it's also easy to overlook that the
kernel should not access the vmemmap and direct mapping areas before the
sync.
# The solution: Make page table sync more code robust and harder to miss
To address this, Dave Hansen suggested [3] [4] introducing
{pgd,p4d}_populate_kernel() for updating kernel portion of the page tables
and allow each architecture to explicitly perform synchronization when
installing top-level entries. With this approach, we no longer need to
worry about missing the sync step, reducing the risk of future
regressions.
The new interface reuses existing ARCH_PAGE_TABLE_SYNC_MASK,
PGTBL_P*D_MODIFIED and arch_sync_kernel_mappings() facility used by
vmalloc and ioremap to synchronize page tables.
pgd_populate_kernel() looks like this:
static inline void pgd_populate_kernel(unsigned long addr, pgd_t *pgd,
p4d_t *p4d)
{
pgd_populate(&init_mm, pgd, p4d);
if (ARCH_PAGE_TABLE_SYNC_MASK & PGTBL_PGD_MODIFIED)
arch_sync_kernel_mappings(addr, addr);
}
It is worth noting that vmalloc() and apply_to_range() carefully
synchronizes page tables by calling p*d_alloc_track() and
arch_sync_kernel_mappings(), and thus they are not affected by this patch
series.
This series was hugely inspired by Dave Hansen's suggestion and hence
added Suggested-by: Dave Hansen.
Cc stable because lack of this series opens the door to intermittent
boot failures.
This patch (of 3):
Move ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to
linux/pgtable.h so that they can be used outside of vmalloc and ioremap.
Link: https://lkml.kernel.org/r/20250818020206.4517-1-harry.yoo@oracle.com
Link: https://lkml.kernel.org/r/20250818020206.4517-2-harry.yoo@oracle.com
Link: https://lore.kernel.org/linux-mm/20250220064105.808339-1-gwan-gyeong.mun@intel.com [1]
Link: https://lore.kernel.org/linux-mm/20250311114420.240341-1-gwan-gyeong.mun@intel.com [2]
Link: https://lore.kernel.org/linux-mm/d1da214c-53d3-45ac-a8b6-51821c5416e4@intel.com [3]
Link: https://lore.kernel.org/linux-mm/4d800744-7b88-41aa-9979-b245e8bf794b@intel.com [4]
Fixes: 8d400913c231 ("x86/vmemmap: handle unpopulated sub-pmd ranges")
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Kiryl Shutsemau <kas@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: bibo mao <maobibo@loongson.cn>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To avoid potential UAF issues during module removal races, we use
pde_set_flags() to save proc_ops flags in PDE itself before
proc_register(), and then use pde_has_proc_*() helpers instead of directly
dereferencing pde->proc_ops->*.
However, the pde_set_flags() call was missing when creating net related
proc files. This omission caused incorrect behavior which FMODE_LSEEK was
being cleared inappropriately in proc_reg_open() for net proc files. Lars
reported it in this link[1].
Fix this by ensuring pde_set_flags() is called when register proc entry,
and add NULL check for proc_ops in pde_set_flags().
[wangzijie1@honor.com: stash pde->proc_ops in a local const variable, per Christian]
Link: https://lkml.kernel.org/r/20250821105806.1453833-1-wangzijie1@honor.com
Link: https://lkml.kernel.org/r/20250818123102.959595-1-wangzijie1@honor.com
Link: https://lore.kernel.org/all/20250815195616.64497967@chagall.paradoxon.rec/ [1]
Fixes: ff7ec8dc1b64 ("proc: use the same treatment to check proc_lseek as ones for proc_read_iter et.al")
Signed-off-by: wangzijie <wangzijie1@honor.com>
Reported-by: Lars Wendler <polynomial-c@gmx.de>
Tested-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Petr Vaněk <pv@excello.cz>
Tested by: Lars Wendler <polynomial-c@gmx.de>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Kirill A. Shutemov <k.shutemov@gmail.com>
Cc: wangzijie <wangzijie1@honor.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For !CONFIG_SPARSEMEM_VMEMMAP, memmap page accounting is currently done
upfront in sparse_buffer_init(). However, sparse_buffer_alloc() may
return NULL in failure scenario.
Also, memmap pages may be allocated either from the memblock allocator
during early boot or from the buddy allocator. When removed via
arch_remove_memory(), accounting of memmap pages must reflect the original
allocation source.
To ensure correctness:
* Account memmap pages after successful allocation in sparse_init_nid()
and section_activate().
* Account memmap pages in section_deactivate() based on allocation
source.
Link: https://lkml.kernel.org/r/20250807183545.1424509-1-sumanthk@linux.ibm.com
Fixes: 15995a352474 ("mm: report per-page metadata information")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On 32-bit systems, the throughput calculation in
damos_set_effective_quota() is prone to unnecessary multiplication
overflow. Using mult_frac() to fix it.
Andrew Paniakin also recently found and privately reported this issue, on
64 bit systems. This can also happen on 64-bit systems, once the charged
size exceeds ~17 TiB. On systems running for long time in production,
this issue can actually happen.
More specifically, when a DAMOS scheme having the time quota run for
longtime, throughput calculation can overflow and set esz too small. As a
result, speed of the scheme get unexpectedly slow.
Link: https://lkml.kernel.org/r/20250821125555.3020951-1-yanquanmin1@huawei.com
Fixes: 1cd243030059 ("mm/damon/schemes: implement time quota")
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reported-by: Andrew Paniakin <apanyaki@amazon.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: ze zuo <zuoze1@huawei.com>
Cc: <stable@vger.kernel.org> [5.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 07d24902977e ("kexec: enable CMA based contiguous allocation")
introduces logic to use CMA-based allocation in kexec by default. As part
of the changes, it introduces a kexec_file_load flag to disable the use of
CMA allocations from userspace. However, this flag is broken since it is
missing from the list of legal flags for kexec_file_load. kexec_file_load
returns EINVAL when attempting to use the flag.
Fix this by adding the KEXEC_FILE_NO_CMA flag to the list of legal flags
for kexec_file_load.
Without this fix, kexec_file_load syscall will failed and return
'-EINVAL' when KEXEC_FILE_NO_CMA is specified.
Link: https://lkml.kernel.org/r/20250805211527.122367-2-makb@juniper.net
Fixes: 07d24902977e ("kexec: enable CMA based contiguous allocation")
Signed-off-by: Brian Mak <makb@juniper.net>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Dave Young <dyoung@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
GCC doesn't support "hwasan-kernel-mem-intrinsic-prefix", only
"asan-kernel-mem-intrinsic-prefix"[0], while LLVM supports both. This is
already taken into account when checking
"CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX", but not in the KASAN Makefile
adding those parameters when "CONFIG_KASAN_SW_TAGS" is enabled.
Replace the version check with "CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX",
which already validates that mem-intrinsic prefix parameter can be used,
and choose the correct name depending on compiler.
GCC 13 and above trigger "CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX" which
prevents `mem{cpy,move,set}()` being redefined in "mm/kasan/shadow.c"
since commit 36be5cba99f6 ("kasan: treat meminstrinsic as builtins in
uninstrumented files"), as we expect the compiler to prefix those calls
with `__(hw)asan_` instead. But as the option passed to GCC has been
incorrect, the compiler has not been emitting those prefixes, effectively
never calling the instrumented versions of `mem{cpy,move,set}()` with
"CONFIG_KASAN_SW_TAGS" enabled.
If "CONFIG_FORTIFY_SOURCES" is enabled, this issue would be mitigated as
it redefines `mem{cpy,move,set}()` and properly aliases the
`__underlying_mem*()` that will be called to the instrumented versions.
Link: https://lkml.kernel.org/r/20250821120735.156244-1-ada.coupriediaz@arm.com
Link: https://gcc.gnu.org/onlinedocs/gcc-13.4.0/gcc/Optimize-Options.html [0]
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Fixes: 36be5cba99f6 ("kasan: treat meminstrinsic as builtins in uninstrumented files")
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Functions __kasan_populate_vmalloc() and __kasan_depopulate_vmalloc() use
apply_to_pte_range(), which enters lazy MMU mode. In that mode updating
PTEs may not be observed until the mode is left.
That may lead to a situation in which otherwise correct reads and writes
to a PTE using ptep_get(), set_pte(), pte_clear() and other access
primitives bring wrong results when the vmalloc shadow memory is being
(de-)populated.
To avoid these hazards leave the lazy MMU mode before and re-enter it
after each PTE manipulation.
Link: https://lkml.kernel.org/r/0d2efb7ddddbff6b288fbffeeb10166e90771718.1755528662.git.agordeev@linux.ibm.com
Fixes: 3c5c3cfb9ef4 ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
While working on the lazy MMU mode enablement for s390 I hit pretty
curious issues in the kasan code.
The first is related to a custom kasan-based sanitizer aimed at catching
invalid accesses to PTEs and is inspired by [1] conversation. The kasan
complains on valid PTE accesses, while the shadow memory is reported as
unpoisoned:
[ 102.783993] ==================================================================
[ 102.784008] BUG: KASAN: out-of-bounds in set_pte_range+0x36c/0x390
[ 102.784016] Read of size 8 at addr 0000780084cf9608 by task vmalloc_test/0/5542
[ 102.784019]
[ 102.784040] CPU: 1 UID: 0 PID: 5542 Comm: vmalloc_test/0 Kdump: loaded Tainted: G OE 6.16.0-gcc-ipte-kasan-11657-gb2d930c4950e #340 PREEMPT
[ 102.784047] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 102.784049] Hardware name: IBM 8561 T01 703 (LPAR)
[ 102.784052] Call Trace:
[ 102.784054] [<00007fffe0147ac0>] dump_stack_lvl+0xe8/0x140
[ 102.784059] [<00007fffe0112484>] print_address_description.constprop.0+0x34/0x2d0
[ 102.784066] [<00007fffe011282c>] print_report+0x10c/0x1f8
[ 102.784071] [<00007fffe090785a>] kasan_report+0xfa/0x220
[ 102.784078] [<00007fffe01d3dec>] set_pte_range+0x36c/0x390
[ 102.784083] [<00007fffe01d41c2>] leave_ipte_batch+0x3b2/0xb10
[ 102.784088] [<00007fffe07d3650>] apply_to_pte_range+0x2f0/0x4e0
[ 102.784094] [<00007fffe07e62e4>] apply_to_pmd_range+0x194/0x3e0
[ 102.784099] [<00007fffe07e820e>] __apply_to_page_range+0x2fe/0x7a0
[ 102.784104] [<00007fffe07e86d8>] apply_to_page_range+0x28/0x40
[ 102.784109] [<00007fffe090a3ec>] __kasan_populate_vmalloc+0xec/0x310
[ 102.784114] [<00007fffe090aa36>] kasan_populate_vmalloc+0x96/0x130
[ 102.784118] [<00007fffe0833a04>] alloc_vmap_area+0x3d4/0xf30
[ 102.784123] [<00007fffe083a8ba>] __get_vm_area_node+0x1aa/0x4c0
[ 102.784127] [<00007fffe083c4f6>] __vmalloc_node_range_noprof+0x126/0x4e0
[ 102.784131] [<00007fffe083c980>] __vmalloc_node_noprof+0xd0/0x110
[ 102.784135] [<00007fffe083ca32>] vmalloc_noprof+0x32/0x40
[ 102.784139] [<00007fff608aa336>] fix_size_alloc_test+0x66/0x150 [test_vmalloc]
[ 102.784147] [<00007fff608aa710>] test_func+0x2f0/0x430 [test_vmalloc]
[ 102.784153] [<00007fffe02841f8>] kthread+0x3f8/0x7a0
[ 102.784159] [<00007fffe014d8b4>] __ret_from_fork+0xd4/0x7d0
[ 102.784164] [<00007fffe299c00a>] ret_from_fork+0xa/0x30
[ 102.784173] no locks held by vmalloc_test/0/5542.
[ 102.784176]
[ 102.784178] The buggy address belongs to the physical page:
[ 102.784186] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x84cf9
[ 102.784198] flags: 0x3ffff00000000000(node=0|zone=1|lastcpupid=0x1ffff)
[ 102.784212] page_type: f2(table)
[ 102.784225] raw: 3ffff00000000000 0000000000000000 0000000000000122 0000000000000000
[ 102.784234] raw: 0000000000000000 0000000000000000 f200000000000001 0000000000000000
[ 102.784248] page dumped because: kasan: bad access detected
[ 102.784250]
[ 102.784252] Memory state around the buggy address:
[ 102.784260] 0000780084cf9500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 102.784274] 0000780084cf9580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 102.784277] >0000780084cf9600: fd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 102.784290] ^
[ 102.784293] 0000780084cf9680: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 102.784303] 0000780084cf9700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 102.784306] ==================================================================
The second issue hits when the custom sanitizer above is not implemented,
but the kasan itself is still active:
[ 1554.438028] Unable to handle kernel pointer dereference in virtual kernel address space
[ 1554.438065] Failing address: 001c0ff0066f0000 TEID: 001c0ff0066f0403
[ 1554.438076] Fault in home space mode while using kernel ASCE.
[ 1554.438103] AS:00000000059d400b R2:0000000ffec5c00b R3:00000000c6c9c007 S:0000000314470001 P:00000000d0ab413d
[ 1554.438158] Oops: 0011 ilc:2 [#1]SMP
[ 1554.438175] Modules linked in: test_vmalloc(E+) nft_fib_inet(E) nft_fib_ipv4(E) nft_fib_ipv6(E) nft_fib(E) nft_reject_inet(E) nf_reject_ipv4(E) nf_reject_ipv6(E) nft_reject(E) nft_ct(E) nft_chain_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) nf_tables(E) sunrpc(E) pkey_pckmo(E) uvdevice(E) s390_trng(E) rng_core(E) eadm_sch(E) vfio_ccw(E) mdev(E) vfio_iommu_type1(E) vfio(E) sch_fq_codel(E) drm(E) loop(E) i2c_core(E) drm_panel_orientation_quirks(E) nfnetlink(E) ctcm(E) fsm(E) zfcp(E) scsi_transport_fc(E) diag288_wdt(E) watchdog(E) ghash_s390(E) prng(E) aes_s390(E) des_s390(E) libdes(E) sha3_512_s390(E) sha3_256_s390(E) sha512_s390(E) sha1_s390(E) sha_common(E) pkey(E) autofs4(E)
[ 1554.438319] Unloaded tainted modules: pkey_uv(E):1 hmac_s390(E):2
[ 1554.438354] CPU: 1 UID: 0 PID: 1715 Comm: vmalloc_test/0 Kdump: loaded Tainted: G E 6.16.0-gcc-ipte-kasan-11657-gb2d930c4950e #350 PREEMPT
[ 1554.438368] Tainted: [E]=UNSIGNED_MODULE
[ 1554.438374] Hardware name: IBM 8561 T01 703 (LPAR)
[ 1554.438381] Krnl PSW : 0704e00180000000 00007fffe1d3d6ae (memset+0x5e/0x98)
[ 1554.438396] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
[ 1554.438409] Krnl GPRS: 0000000000000001 001c0ff0066f0000 001c0ff0066f0000 00000000000000f8
[ 1554.438418] 00000000000009fe 0000000000000009 0000000000000000 0000000000000002
[ 1554.438426] 0000000000005000 000078031ae655c8 00000feffdcf9f59 0000780258672a20
[ 1554.438433] 0000780243153500 00007f8033780000 00007fffe083a510 00007f7fee7cfa00
[ 1554.438452] Krnl Code: 00007fffe1d3d6a0: eb540008000c srlg %r5,%r4,8
00007fffe1d3d6a6: b9020055 ltgr %r5,%r5
#00007fffe1d3d6aa: a784000b brc 8,00007fffe1d3d6c0
>00007fffe1d3d6ae: 42301000 stc %r3,0(%r1)
00007fffe1d3d6b2: d2fe10011000 mvc 1(255,%r1),0(%r1)
00007fffe1d3d6b8: 41101100 la %r1,256(%r1)
00007fffe1d3d6bc: a757fff9 brctg %r5,00007fffe1d3d6ae
00007fffe1d3d6c0: 42301000 stc %r3,0(%r1)
[ 1554.438539] Call Trace:
[ 1554.438545] [<00007fffe1d3d6ae>] memset+0x5e/0x98
[ 1554.438552] ([<00007fffe083a510>] remove_vm_area+0x220/0x400)
[ 1554.438562] [<00007fffe083a9d6>] vfree.part.0+0x26/0x810
[ 1554.438569] [<00007fff6073bd50>] fix_align_alloc_test+0x50/0x90 [test_vmalloc]
[ 1554.438583] [<00007fff6073c73a>] test_func+0x46a/0x6c0 [test_vmalloc]
[ 1554.438593] [<00007fffe0283ac8>] kthread+0x3f8/0x7a0
[ 1554.438603] [<00007fffe014d8b4>] __ret_from_fork+0xd4/0x7d0
[ 1554.438613] [<00007fffe299ac0a>] ret_from_fork+0xa/0x30
[ 1554.438622] INFO: lockdep is turned off.
[ 1554.438627] Last Breaking-Event-Address:
[ 1554.438632] [<00007fffe1d3d65c>] memset+0xc/0x98
[ 1554.438644] Kernel panic - not syncing: Fatal exception: panic_on_oops
This series fixes the above issues and is a pre-requisite for the s390
lazy MMU mode implementation.
test_vmalloc was used to stress-test the fixes.
This patch (of 2):
When vmalloc shadow memory is established the modification of the
corresponding page tables is not protected by any locks. Instead, the
locking is done per-PTE. This scheme however has defects.
kasan_populate_vmalloc_pte() - while ptep_get() read is atomic the
sequence pte_none(ptep_get()) is not. Doing that outside of the lock
might lead to a concurrent PTE update and what could be seen as a shadow
memory corruption as result.
kasan_depopulate_vmalloc_pte() - by the time a page whose address was
extracted from ptep_get() read and cached in a local variable outside of
the lock is attempted to get free, could actually be freed already.
To avoid these put ptep_get() itself and the code that manipulates the
result of the read under lock. In addition, move freeing of the page out
of the atomic context.
Link: https://lkml.kernel.org/r/cover.1755528662.git.agordeev@linux.ibm.com
Link: https://lkml.kernel.org/r/adb258634194593db294c0d1fb35646e894d6ead.1755528662.git.agordeev@linux.ibm.com
Link: https://lore.kernel.org/linux-mm/5b0609c9-95ee-4e48-bb6d-98f57c5d2c31@arm.com/ [1]
Fixes: 3c5c3cfb9ef4 ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similar to commit 09c6304e38e4 ("kasan: test: fix compatibility with
FORTIFY_SOURCE") the kernel is panicing in kasan_string().
This is due to the `src` and `ptr` not being hidden from the optimizer
which would disable the runtime fortify string checker.
Call trace:
__fortify_panic+0x10/0x20 (P)
kasan_strings+0x980/0x9b0
kunit_try_run_case+0x68/0x190
kunit_generic_run_threadfn_adapter+0x34/0x68
kthread+0x1c4/0x228
ret_from_fork+0x10/0x20
Code: d503233f a9bf7bfd 910003fd 9424b243 (d4210000)
---[ end trace 0000000000000000 ]---
note: kunit_try_catch[128] exited with irqs disabled
note: kunit_try_catch[128] exited with preempt_count 1
# kasan_strings: try faulted: last
** replaying previous printk message **
# kasan_strings: try faulted: last line seen mm/kasan/kasan_test_c.c:1600
# kasan_strings: internal error occurred preventing test case from running: -4
Link: https://lkml.kernel.org/r/20250801120236.2962642-1-yeoreum.yun@arm.com
Fixes: 73228c7ecc5e ("KASAN: port KASAN Tests to KUnit")
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
FORCE_READ() converts input value x to its pointer type then reads from
address x. This is wrong. If x is a non-pointer, it would be caught it
easily. But all FORCE_READ() callers are trying to read from a pointer
and FORCE_READ() basically reads a pointer to a pointer instead of the
original typed pointer. Almost no access violation was found, except the
one from split_huge_page_test.
Fix it by implementing a simplified READ_ONCE() instead.
Link: https://lkml.kernel.org/r/20250805175140.241656-1-ziy@nvidia.com
Fixes: 3f6bfd4789a0 ("selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));"")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: wang lian <lianux.mm@gmail.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With CONFIG_HIGHPTE on 32-bit ARM, move_pages_pte() maps PTE pages using
kmap_local_page(), which requires unmapping in Last-In-First-Out order.
The current code maps dst_pte first, then src_pte, but unmaps them in the
same order (dst_pte, src_pte), violating the LIFO requirement. This
causes the warning in kunmap_local_indexed():
WARNING: CPU: 0 PID: 604 at mm/highmem.c:622 kunmap_local_indexed+0x178/0x17c
addr \!= __fix_to_virt(FIX_KMAP_BEGIN + idx)
Fix this by reversing the unmap order to respect LIFO ordering.
This issue follows the same pattern as similar fixes:
- commit eca6828403b8 ("crypto: skcipher - fix mismatch between mapping and unmapping order")
- commit 8cf57c6df818 ("nilfs2: eliminate staggered calls to kunmap in nilfs_rename")
Both of which addressed the same fundamental requirement that kmap_local
operations must follow LIFO ordering.
Link: https://lkml.kernel.org/r/20250731144431.773923-1-sashal@kernel.org
Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Before calling ocfs2_delete_osb(), ocfs2_journal_shutdown() has already
been executed in ocfs2_dismount_volume(), so osb->journal must be NULL.
Therefore, the following calltrace will inevitably fail when it reaches
jbd2_journal_release_jbd_inode().
ocfs2_dismount_volume()->
ocfs2_delete_osb()->
ocfs2_free_slot_info()->
__ocfs2_free_slot_info()->
evict()->
ocfs2_evict_inode()->
ocfs2_clear_inode()->
jbd2_journal_release_jbd_inode(osb->journal->j_journal,
Adding osb->journal checks will prevent null-ptr-deref during the above
execution path.
Link: https://lkml.kernel.org/r/tencent_357489BEAEE4AED74CBD67D246DBD2C4C606@qq.com
Fixes: da5e7c87827e ("ocfs2: cleanup journal init and shutdown")
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Reported-by: syzbot+47d8cb2f2cc1517e515a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=47d8cb2f2cc1517e515a
Tested-by: syzbot+47d8cb2f2cc1517e515a@syzkaller.appspotmail.com
Reviewed-by: Mark Tinguely <mark.tinguely@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Unsafe code in VmaNew's methods assumes that the type has the same layout
as the inner `bindings::vm_area_struct`. This is not guaranteed by the
default struct representation in Rust, but requires specifying the
`transparent` representation.
Link: https://lkml.kernel.org/r/20250812132712.61007-1-baptiste.lepers@gmail.com
Fixes: dcb81aeab406 ("mm: rust: add VmaNew for f_ops->mmap()")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Trevor Gross <tmgross@umich.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When there are memory-only nodes (nodes without CPUs), these nodes are not
properly initialized, causing kernel panic during boot.
of_numa_init
of_numa_parse_cpu_nodes
node_set(nid, numa_nodes_parsed);
of_numa_parse_memory_nodes
In of_numa_parse_cpu_nodes, numa_nodes_parsed gets updated only for nodes
containing CPUs. Memory-only nodes should have been updated in
of_numa_parse_memory_nodes, but they weren't.
Subsequently, when free_area_init() attempts to access NODE_DATA() for
these uninitialized memory nodes, the kernel panics due to NULL pointer
dereference.
This can be reproduced on ARM64 QEMU with 1 CPU and 2 memory nodes:
qemu-system-aarch64 \
-cpu host -nographic \
-m 4G -smp 1 \
-machine virt,accel=kvm,gic-version=3,iommu=smmuv3 \
-object memory-backend-ram,size=2G,id=mem0 \
-object memory-backend-ram,size=2G,id=mem1 \
-numa node,nodeid=0,memdev=mem0 \
-numa node,nodeid=1,memdev=mem1 \
-kernel $IMAGE \
-hda $DISK \
-append "console=ttyAMA0 root=/dev/vda rw earlycon"
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x481fd010]
[ 0.000000] Linux version 6.17.0-rc1-00001-gabb4b3daf18c-dirty (yintirui@local) (gcc (GCC) 12.3.1, GNU ld (GNU Binutils) 2.41) #52 SMP PREEMPT Mon Aug 18 09:49:40 CST 2025
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: linux,dummy-virt
[ 0.000000] efi: UEFI not found.
[ 0.000000] earlycon: pl11 at MMIO 0x0000000009000000 (options '')
[ 0.000000] printk: legacy bootconsole [pl11] enabled
[ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[ 0.000000] NODE_DATA(0) allocated [mem 0xbfffd9c0-0xbfffffff]
[ 0.000000] node 1 must be removed before remove section 23
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] node 1: [mem 0x00000000c0000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0
[ 0.000000] Mem abort info:
[ 0.000000] ESR = 0x0000000096000004
[ 0.000000] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.000000] SET = 0, FnV = 0
[ 0.000000] EA = 0, S1PTW = 0
[ 0.000000] FSC = 0x04: level 0 translation fault
[ 0.000000] Data abort info:
[ 0.000000] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 0.000000] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 0.000000] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 0.000000] [00000000000000a0] user address but active_mm is swapper
[ 0.000000] Internal error: Oops: 0000000096000004 [#1] SMP
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.17.0-rc1-00001-g760c6dabf762-dirty #54 PREEMPT
[ 0.000000] Hardware name: linux,dummy-virt (DT)
[ 0.000000] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : free_area_init+0x50c/0xf9c
[ 0.000000] lr : free_area_init+0x5c0/0xf9c
[ 0.000000] sp : ffffa02ca0f33c00
[ 0.000000] x29: ffffa02ca0f33cb0 x28: 0000000000000000 x27: 0000000000000000
[ 0.000000] x26: 4ec4ec4ec4ec4ec5 x25: 00000000000c0000 x24: 00000000000c0000
[ 0.000000] x23: 0000000000040000 x22: 0000000000000000 x21: ffffa02ca0f3b368
[ 0.000000] x20: ffffa02ca14c7b98 x19: 0000000000000000 x18: 0000000000000002
[ 0.000000] x17: 000000000000cacc x16: 0000000000000001 x15: 0000000000000001
[ 0.000000] x14: 0000000080000000 x13: 0000000000000018 x12: 0000000000000002
[ 0.000000] x11: ffffa02ca0fd4f00 x10: ffffa02ca14bab20 x9 : ffffa02ca14bab38
[ 0.000000] x8 : 00000000000c0000 x7 : 0000000000000001 x6 : 0000000000000002
[ 0.000000] x5 : 0000000140000000 x4 : ffffa02ca0f33c90 x3 : ffffa02ca0f33ca0
[ 0.000000] x2 : ffffa02ca0f33c98 x1 : 0000000080000000 x0 : 0000000000000001
[ 0.000000] Call trace:
[ 0.000000] free_area_init+0x50c/0xf9c (P)
[ 0.000000] bootmem_init+0x110/0x1dc
[ 0.000000] setup_arch+0x278/0x60c
[ 0.000000] start_kernel+0x70/0x748
[ 0.000000] __primary_switched+0x88/0x90
[ 0.000000] Code: d503201f b98093e0 52800016 f8607a93 (f9405260)
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
Link: https://lkml.kernel.org/r/20250819075510.2079961-1-yintirui@huawei.com
Fixes: 767507654c22 ("arch_numa: switch over to numa_memblks")
Signed-off-by: Yin Tirui <yintirui@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Chen Jun <chenjun102@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The information present in this file is outdated and doesn't serve any
purpose with the current design of the driver.
Remove the outdated file.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[ Viresh: Rewrite commit log ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Use int instead of u32 for the 'rc' variable in xgene_ahci_softreset()
to store negative error codes returned by ahci_do_softreset().
In xgene_ahci_pmp_softreset(), remove the redundant 'rc' variable and
directly return the result of the ahci_do_softreset() call instead.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
The 'target-supply' property is used by some i.MX devicetree files.
Document it to fix the following dt-schema warning:
'target-supply' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
The DTS code coding style expects exactly one space around '='
character.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
The current algorithm sanity checks do not properly apply to new
encoded extents.
Unify the algorithm check with Z_EROFS_COMPRESSION(_RUNTIME)_MAX
and ensure consistency with sbi->available_compr_algs.
Reported-and-tested-by: syzbot+5a398eb460ddaa6f242f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/68a8bd20.050a0220.37038e.005a.GAE@google.com
Fixes: 1d191b4ca51d ("erofs: implement encoded extent metadata")
Thanks-to: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf-tools fixes from Namhyung Kim:
"A number of kernel header sync changes and two build-id fixes"
* tag 'perf-tools-fixes-for-v6.17-2025-08-27' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf symbol: Add blocking argument to filename__read_build_id
perf symbol-minimal: Fix ehdr reading in filename__read_build_id
tools headers: Sync uapi/linux/vhost.h with the kernel source
tools headers: Sync uapi/linux/prctl.h with the kernel source
tools headers: Sync uapi/linux/fs.h with the kernel source
tools headers: Sync uapi/linux/fcntl.h with the kernel source
tools headers: Sync syscall tables with the kernel source
tools headers: Sync powerpc headers with the kernel source
tools headers: Sync arm64 headers with the kernel source
tools headers: Sync x86 headers with the kernel source
tools headers: Sync linux/cfi_types.h with the kernel source
tools headers: Sync linux/bits.h with the kernel source
tools headers: Sync KVM headers with the kernel source
perf test: Fix a build error in x86 topdown test
|
|
Alexander Duyck says:
====================
Locking fixes for fbnic driver
Address a few locking issues that were reported on the fbnic driver.
Specifically in one case we were seeing locking leaks due to us not
releasing the locks in certain exception paths. In another case we were
using phylink_resume outside of a section in which we held the RTNL mutex
and as a result we were throwing an assert.
====================
Link: https://patch.msgid.link/175616242563.1963577.7257712519613275567.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fbnic driver was presenting with the following locking assert coming
out of a PM resume:
[ 42.208116][ T164] RTNL: assertion failed at drivers/net/phy/phylink.c (2611)
[ 42.208492][ T164] WARNING: CPU: 1 PID: 164 at drivers/net/phy/phylink.c:2611 phylink_resume+0x190/0x1e0
[ 42.208872][ T164] Modules linked in:
[ 42.209140][ T164] CPU: 1 UID: 0 PID: 164 Comm: bash Not tainted 6.17.0-rc2-virtme #134 PREEMPT(full)
[ 42.209496][ T164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 42.209861][ T164] RIP: 0010:phylink_resume+0x190/0x1e0
[ 42.210057][ T164] Code: 83 e5 01 0f 85 b0 fe ff ff c6 05 1c cd 3e 02 01 90 ba 33 0a 00 00 48 c7 c6 20 3a 1d a5 48 c7 c7 e0 3e 1d a5 e8 21 b8 90 fe 90 <0f> 0b 90 90 e9 86 fe ff ff e8 42 ea 1f ff e9 e2 fe ff ff 48 89 ef
[ 42.210708][ T164] RSP: 0018:ffffc90000affbd8 EFLAGS: 00010296
[ 42.210983][ T164] RAX: 0000000000000000 RBX: ffff8880078d8400 RCX: 0000000000000000
[ 42.211235][ T164] RDX: 0000000000000000 RSI: 1ffffffff4f10938 RDI: 0000000000000001
[ 42.211466][ T164] RBP: 0000000000000000 R08: ffffffffa2ae79ea R09: fffffbfff4b3eb84
[ 42.211707][ T164] R10: 0000000000000003 R11: 0000000000000000 R12: ffff888007ad8000
[ 42.211997][ T164] R13: 0000000000000002 R14: ffff888006a18800 R15: ffffffffa34c59e0
[ 42.212234][ T164] FS: 00007f0dc8e39740(0000) GS:ffff88808f51f000(0000) knlGS:0000000000000000
[ 42.212505][ T164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 42.212704][ T164] CR2: 00007f0dc8e9fe10 CR3: 000000000b56d003 CR4: 0000000000772ef0
[ 42.213227][ T164] PKRU: 55555554
[ 42.213366][ T164] Call Trace:
[ 42.213483][ T164] <TASK>
[ 42.213565][ T164] __fbnic_pm_attach.isra.0+0x8e/0xa0
[ 42.213725][ T164] pci_reset_function+0x116/0x1d0
[ 42.213895][ T164] reset_store+0xa0/0x100
[ 42.214025][ T164] ? pci_dev_reset_attr_is_visible+0x50/0x50
[ 42.214221][ T164] ? sysfs_file_kobj+0xc1/0x1e0
[ 42.214374][ T164] ? sysfs_kf_write+0x65/0x160
[ 42.214526][ T164] kernfs_fop_write_iter+0x2f8/0x4c0
[ 42.214677][ T164] ? kernfs_vma_page_mkwrite+0x1f0/0x1f0
[ 42.214836][ T164] new_sync_write+0x308/0x6f0
[ 42.214987][ T164] ? __lock_acquire+0x34c/0x740
[ 42.215135][ T164] ? new_sync_read+0x6f0/0x6f0
[ 42.215288][ T164] ? lock_acquire.part.0+0xbc/0x260
[ 42.215440][ T164] ? ksys_write+0xff/0x200
[ 42.215590][ T164] ? perf_trace_sched_switch+0x6d0/0x6d0
[ 42.215742][ T164] vfs_write+0x65e/0xbb0
[ 42.215876][ T164] ksys_write+0xff/0x200
[ 42.215994][ T164] ? __ia32_sys_read+0xc0/0xc0
[ 42.216141][ T164] ? do_user_addr_fault+0x269/0x9f0
[ 42.216292][ T164] ? rcu_is_watching+0x15/0xd0
[ 42.216442][ T164] do_syscall_64+0xbb/0x360
[ 42.216591][ T164] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 42.216784][ T164] RIP: 0033:0x7f0dc8ea9986
A bit of digging showed that we were invoking the phylink_resume as a part
of the fbnic_up path when we were enabling the service task while not
holding the RTNL lock. We should be enabling this sooner as a part of the
ndo_open path and then just letting the service task come online later.
This will help to enforce the correct locking and brings the phylink
interface online at the same time as the network interface, instead of at a
later time.
I tested this on QEMU to verify this was working by putting the system to
sleep using "echo mem > /sys/power/state" to put the system to sleep in the
guest and then using the command "system_wakeup" in the QEMU monitor.
Fixes: 69684376eed5 ("eth: fbnic: Add link detection")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/175616257316.1963577.12238158800417771119.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The exception handling path for the __fbnic_pm_resume function had a bug in
that it was taking the devlink lock and then exiting to exception handling
instead of waiting until after it released the lock to do so. In order to
handle that I am swapping the placement of the unlock and the exception
handling jump to label so that we don't trigger a deadlock by holding the
lock longer than we need to.
In addition this change applies the same ordering to the rtnl_lock/unlock
calls in the same function as it should make the code easier to follow if
it adheres to a consistent pattern.
Fixes: 82534f446daa ("eth: fbnic: Add devlink dev flash support")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/175616256667.1963577.5543500806256052549.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
eth: fbnic: Extend hw stats support
Mohsin says:
Extend hardware stats support for fbnic by adding the ability to reset
hardware stats when the device experience a reset due to a PCI error and
include MAC stats in the hardware stats reset. Additionally, expand
hardware stats coverage to include FEC, PHY, and Pause stats.
v1: https://lore.kernel.org/20250822164731.1461754-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250825200206.2357713-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support to read pause stats for fbnic. Unlike FEC and PCS stats,
pause stats won't wrap, do not fetch them under the service task. Since,
they are exclusively accessed via the ethtool API, don't include them in
fbnic_get_hw_stats().
]# ethtool -I -a eth0
Pause parameters for eth0:
Autonegotiate: on
RX: off
TX: off
Statistics:
tx_pause_frames: 0
rx_pause_frames: 0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250825200206.2357713-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide support to read PHY stats (FEC and PCS) via the ethtool API.
]# ethtool -I --show-fec eth0
FEC parameters for eth0:
Supported/Configured FEC encodings: RS
Active FEC encoding: RS
Statistics:
corrected_blocks: 0
uncorrectable_blocks: 0
]# ethtool -S eth0 --groups eth-phy
Standard stats for eth0:
eth-phy-SymbolErrorDuringCarrier: 0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250825200206.2357713-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support to fetch PHY stats consisting of PCS and FEC stats from the
device. When reading the stats counters, the lo part is read first, which
latches the hi part to ensure consistent reading of the stats counter.
FEC and PCS stats can wrap depending on the access frequency. To prevent
wrapping, fetch these stats periodically under the service task. Also to
maintain consistency fetch these stats along with other 32b stats under
__fbnic_get_hw_stats32().
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250825200206.2357713-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reset the MAC stats as part of the hardware stats reset to ensure
consistency. Currently, hardware stats are reset during device bring-up
and upon experiencing PCI errors; however, MAC stats are being skipped
during these resets.
When fbnic_reset_hw_stats() is called upon recovering from PCI error,
MAC stats are accessed outside the rtnl_lock. The only other access to
MAC stats is via the ethtool API, which is protected by rtnl_lock. This
can result in concurrent access to MAC stats and a potential race. Protect
the fbnic_reset_hw_stats() call in __fbnic_pm_attach() with rtnl_lock to
avoid this.
Note that fbnic_reset_hw_mac_stats() is called outside the hardware
stats lock which protects access to the fbnic_hw_stats. This is intentional
because MAC stats are fetched from the device outside this lock and are
exclusively read via the ethtool API.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250825200206.2357713-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Upon experiencing a PCI error, fbnic reset the device to recover from
the failure. Reset the hardware stats as part of the device reset to
ensure accurate stats reporting.
Note that the reset is not really resetting the aggregate value to 0,
which may result in a spike for a system collecting deltas in stats.
Rather, the reset re-latches the current value as previous, in case HW
got reset.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250825200206.2357713-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move hw_stats_lock out of fbnic_dev to a more appropriate struct
fbnic_hw_stats since the only use of this lock is to protect access to
the hardware stats. While at it, enclose the lock and stats
initialization in a single init call.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250825200206.2357713-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'macsec-replace-custom-netlink-attribute-checks-with-policy-level-checks'
Sabrina Dubroca says:
====================
macsec: replace custom netlink attribute checks with policy-level checks
We can simplify attribute validation a lot by describing the accepted
ranges more precisely in the policies, using NLA_POLICY_MAX etc.
Some of the checks still need to be done later on, because the
attribute length and acceptable range can vary based on values that
can't be known when the policy is validated (cipher suite determines
the key length and valid ICV length, presence of XPN changes the PN
length, detection of duplicate SCIs or ANs, etc).
As a bonus, we get a few extack messages from the policy
validation. I'll add extack to the rest of the checks (mostly in the
genl commands) in an future series.
v1: https://lore.kernel.org/netdev/cover.1664379352.git.sd@queasysnail.net
====================
Link: https://patch.msgid.link/cover.1756202772.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/085bc642136cf3d267ddbb114e6f0c4a9247c797.1756202772.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Those are all off/on flags.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/95707fb36adc1904fa327bc8f4eb055895aa6eff.1756202772.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/629efe0b2150b30abc6472074018cbd521b46578.1756202772.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unfortunately, since the value of MACSEC_DEFAULT_CIPHER_ID doesn't fit
near the others, we can't use a simple range in the policy.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/015e43ade9548c7682c9739087eba0853b3a1331.1756202772.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The existing checks already force this range.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/398cf16191a634ab343ecd811c481d7bdd44a933.1756202772.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is equivalent to the existing checks allowing either
MACSEC_OFFLOAD_OFF or calling macsec_check_offload.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/37e1f1716f1d1d46d3d06c52317564b393fe60e6.1756202772.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's not doing much anymore.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/218147f2f11cab885abc86b779dcefcd3208a2f8.1756202772.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MACSEC_SA_ATTR_PN is either a u32 or a u64, we can now use NLA_UINT
for this instead of a custom binary type. We can then use a min check
within the policy.
We need to keep the length checks done in macsec_{add,upd}_{rx,tx}sa
based on whether the device is set up for XPN (with 64b PNs instead of
32b).
On the dump side, keep the existing custom code as userspace may
expect a u64 when using XPN, and nla_put_uint may only output a u32
attribute if the value fits.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/c9d32bd479cd4464e09010fbce1becc75377c8a0.1756202772.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/192227ca0047b643d6530ece0a3679998b010fac.1756202772.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The existing checks already specify that MACSEC_SA_ATTR_KEYID must
have length MACSEC_KEYID_LEN.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/c4c113328962aae4146183e7a27854e854c796fb.1756202772.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The existing checks already specify that MACSEC_SA_ATTR_SALT must have
length MACSEC_SALT_LEN.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/9699c5fd72322118b164cc8777fadabcce3b997c.1756202772.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
