| Age | Commit message (Collapse) | Author |
|
Change the 'ret' variable from unsigned int to int to store negative error
codes or zero returned by other functions.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but assigning negative error codes to unsigned type may trigger
a compiler warning when the -Wsign-conversion flag is enabled.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250829132020.82077-1-rongqianfeng@vivo.com
|
|
An ITS cache invalidation has been performed immediately after programming
the L2 DTE in gicv5_its_device_register(). No need to perform it again
right after a successful gicv5_its_device_register().
Remove it.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250903023319.1820-1-yuzenghui@huawei.com
|
|
Use comma between vendor-prefix and chip name as it is common.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Fixes: 45601c66b5dd ("dt-bindings: input: touchscreen: convert tsc2007.txt to yaml format")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250830085326.36120-1-akemnade@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert the driver to using the new generic GPIO chip interfaces from
linux/gpio/generic.h.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250811-gpio-mmio-mfd-conv-v1-2-68c5c958cf80@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Commit 974cc7b93441 ("mfd: vexpress: Define the device as MFD cells")
removed the return value check from the call to gpiochip_add_data() (or
rather gpiochip_add() back then and later converted to devres) with no
explanation. This function however can still fail, so check the return
value and bail-out if it does.
Cc: stable@vger.kernel.org
Fixes: 974cc7b93441 ("mfd: vexpress: Define the device as MFD cells")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250811-gpio-mmio-mfd-conv-v1-1-68c5c958cf80@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add support for lpass wsa codec macro version 2.9, which is available in
Qualcomm Glymur SoCs.
Its compatible with 2.8 w.r.t register layouts
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20250902140044.54508-7-srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for lpass codec macro version 2.9, which is available in
Qualcomm Glymur SoCs.
Its compatible with 2.8 w.r.t register layouts.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20250902140044.54508-6-srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document compatibles for Qualcomm Glymur SoC macro digital codecs
(VA and WSA), compatible with previous generation (SM8550 and SM8650).
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20250902140044.54508-5-srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for glymur SoC based sound card support.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Message-ID: <20250902140044.54508-4-srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the bindings for the glymur sound card which is
audioreach based architecture.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20250902140044.54508-3-srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sound machine drivers for Qualcomm SoCs can be reused across multiple
SoCs. But user space ALSA UCM files depend on the card driver name which
should be set per board/SoC.
Allow such customization by using driver match data as sound card driver
name.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Message-ID: <20250902140044.54508-2-srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The name of the platform component matches the name of the card's
platform_device.
This allows for simplifying card and dai_link initialization:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-18-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The name of the platform component matches the name of the card's
platform_device.
This allows for simplifying card and dai_link initialization:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-17-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The name of the platform component matches the name of the card's
platform_device.
This allows for simplifying card and dai_link initialization:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-16-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The name of the platform component matches the name of the card's
platform_device.
This allows for simplifying card and dai_link initialization:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-15-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The name of the platform component matches the name of the card's
platform_device.
This allows for simplifying card and dai_link initialization:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-14-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The name of the platform component matches the name of the card's
platform_device.
This allows for simplifying card and dai_link initialization:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-13-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The name of the platform component matches the name of the card's
platform_device.
This allows for simplifying card and dai_link initialization:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-12-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To allow for multiple instances of the card, move away from static
dai_link declaration.
While at it, simplify the code as the name of the platform component
matches the name of the card's platform_device:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-11-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The name of the platform component matches the name of the card's
platform_device.
This allows for simplifying card and dai_link initialization:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-10-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The name of the platform component matches the name of the card's
platform_device.
This allows for simplifying card and dai_link initialization:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-9-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The name of the platform component matches the name of the card's
platform_device.
This allows for simplifying card and dai_link initialization:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-8-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The name of the platform component matches the name of the card's
platform_device.
This allows for simplifying card and dai_link initialization:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-7-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The name of the platform component matches the name of the card's
platform_device.
This allows for simplifying card and dai_link initialization:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-6-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The name of the platform component matches the name of the card's
platform_device.
This allows for simplifying card and dai_link initialization:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-5-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To allow for multiple instances of the card, move away from static
dai_link declaration.
While at it, simplify the code as the name of the platform component
matches the name of the card's platform_device:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-4-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The name of the platform component matches the name of the card's
platform_device.
This allows for simplifying card and dai_link initialization:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-3-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The name of the platform component matches the name of the card's
platform_device.
This allows for simplifying card and dai_link initialization:
- drop mach->mach_params.platform usage
- drop snd_soc_fixup_dai_links_platform_name() usage
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250902094853.1231842-2-cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fail early from panthor_vm_bind_prepare_op_ctx instead of late from
ops->map_pages.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250828200116.3532255-1-olvaffe@gmail.com
|
|
The generic vDSO library uses the UAPI headers. On arm64 __BITS_PER_LONG is
always '64' even when used from the compat vDSO. In that case __GENMASK()
does an illegal bitshift, invoking undefined behaviour.
Change __BITS_PER_LONG to also work when used from the comapt vDSO.
To not confuse real userspace, only do this when building the kernel.
Reported-by: John Stultz <jstultz@google.com>
Closes: https://lore.kernel.org/lkml/CANDhNCqvKOc9JgphQwr0eDyJiyG4oLFS9R8rSFvU0fpurrJFDg@mail.gmail.com/
Fixes: cd3557a7618b ("vdso/gettimeofday: Add support for auxiliary clocks")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20250821-vdso-arm64-compat-bitsperlong-v1-1-700bcabe7732@linutronix.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Fixes: 78811dd56def ("ALSA: docs: Add documents for recently changes in snd-usb-audio")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://patch.msgid.link/20250903100842.267194-1-pmenzel@molgen.mpg.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
s/OPLC/OLPC/
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250902154858.86102-2-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
PSR idle frames in VBT binary is a 4 bits wide bitfield. Checking if it's
below 0 or over 15 doesn't make sense. Remove these checks.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250901101033.4176277-1-jouni.hogander@intel.com
|
|
There is a kernel panic due to WARN_ONCE when panic_on_warn is set.
This issue occurs when writeback is triggered due to sync call for an
opened file(ie, writeback reason is WB_REASON_SYNC). When f2fs balance
is needed at sync path, flush for quota_release_work is triggered.
By default quota_release_work is queued to "events_unbound" queue which
does not have WQ_MEM_RECLAIM flag. During f2fs balance "writeback"
workqueue tries to flush quota_release_work causing kernel panic due to
MEM_RECLAIM flag mismatch errors.
This patch creates dedicated workqueue with WQ_MEM_RECLAIM flag
for work quota_release_work.
------------[ cut here ]------------
WARNING: CPU: 4 PID: 14867 at kernel/workqueue.c:3721 check_flush_dependency+0x13c/0x148
Call trace:
check_flush_dependency+0x13c/0x148
__flush_work+0xd0/0x398
flush_delayed_work+0x44/0x5c
dquot_writeback_dquots+0x54/0x318
f2fs_do_quota_sync+0xb8/0x1a8
f2fs_write_checkpoint+0x3cc/0x99c
f2fs_gc+0x190/0x750
f2fs_balance_fs+0x110/0x168
f2fs_write_single_data_page+0x474/0x7dc
f2fs_write_data_pages+0x7d0/0xd0c
do_writepages+0xe0/0x2f4
__writeback_single_inode+0x44/0x4ac
writeback_sb_inodes+0x30c/0x538
wb_writeback+0xf4/0x440
wb_workfn+0x128/0x5d4
process_scheduled_works+0x1c4/0x45c
worker_thread+0x32c/0x3e8
kthread+0x11c/0x1b0
ret_from_fork+0x10/0x20
Kernel panic - not syncing: kernel: panic_on_warn set ...
Fixes: ac6f420291b3 ("quota: flush quota_release_work upon quota writeback")
CC: stable@vger.kernel.org
Signed-off-by: Shashank A P <shashank.ap@samsung.com>
Link: https://patch.msgid.link/20250901092905.2115-1-shashank.ap@samsung.com
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Switch from &i915->drm to display->drm.
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250902144929.3026700-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add a system level power-off handler if the "system-power-controller"
flag is set for this device in the device tree.
A power-off request is triggered by writing the TRIGGER_I2C_0 bit (which
is actually just a convention and really depends on the freely
programmable FSM).
Co-developed-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20250826134631.1499936-4-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The PMIC has a multi-function pin PB/EN/VSENSE. If it is configured as
push-button (PB), add the corresponding device for it.
Co-developed-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20250826134631.1499936-3-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
TPS6594 defines two interrupts for the power button one for push and
one for release.
This driver is very simple in that it maps the push interrupt to a key
input and the release interrupt to a key release.
Signed-off-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20250826134631.1499936-2-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
b3c869d35b9b ("jiffies: Remove compile time assumptions about
CLOCK_TICK_RATE") removed the last definition of SHIFTED_HZ but left
behind comments about it. Remove the comments as well.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250825203425.796034-1-helgaas@kernel.org
|
|
The call to __iter_div_u64_rem() in vdso_time_update_aux() is a wrapper
around subtraction. It cannot be used to divide large numbers, as that
introduces long, computationally expensive delays. A regular u64 division
is also not possible in the timekeeper update path as it can be too slow.
Instead of splitting the ktime_t offset into into second and subsecond
components during the timekeeper update fast-path, do it together with the
adjustment of tk->offs_aux in the slow-path. Equivalent to the handling of
offs_boot and monotonic_to_boot.
Reuse the storage of monotonic_to_boot for the new field, as it is not used
by auxiliary timekeepers.
Fixes: 380b84e168e5 ("vdso/vsyscall: Update auxiliary clock data in the datapage")
Reported-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250825-vdso-auxclock-division-v1-1-a1d32a16a313@linutronix.de
Closes: https://lore.kernel.org/lkml/aKwsNNWsHJg8IKzj@localhost/
|
|
Currently, only one pair of mixers is supported, so a non-zero counter
value is sufficient to identify the correct mixer within that pair.
However, future implementations may involve multiple mixer pairs. With
the current implementation, all mixers within the second pair would be
incorrectly selected as right mixer. To correctly select the mixer
within a pair, test the least significant bit of the counter. If the
least significant bit is not set, select the mixer as left one;
otherwise, select the mixer as right one for all pairs.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/669226/
Link: https://lore.kernel.org/r/20250819-v6-16-rc2-quad-pipe-upstream-v15-3-2c7a85089db8@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
It is more likely that resource allocation may fail in complex usage
case, such as quad-pipe case, than existing usage cases.
A resource type ID is printed on failure in the current implementation,
but the raw ID number is not explicit enough to help easily understand
which resource caused the failure, so add a table to match the type ID
to an human readable resource name and use it in the error print.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/669225/
Link: https://lore.kernel.org/r/20250819-v6-16-rc2-quad-pipe-upstream-v15-2-2c7a85089db8@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Current code will validate current plane and previous plane to
confirm they can share a SSPP with multi-rect mode. The SSPP
is already allocated for previous plane, while current plane
is not associated with any SSPP yet. Null pointer is referenced
when validating the SSPP of current plane. Skip SSPP validation
for current plane.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000888ac3000
[0000000000000020] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 4 UID: 0 PID: 1891 Comm: modetest Tainted: G S 6.15.0-rc2-g3ee3f6e1202e #335 PREEMPT
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: SM8650 EV1 rev1 4slam 2et (DT)
pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : dpu_plane_is_multirect_capable+0x68/0x90
lr : dpu_assign_plane_resources+0x288/0x410
sp : ffff800093dcb770
x29: ffff800093dcb770 x28: 0000000000002000 x27: ffff000817c6c000
x26: ffff000806b46368 x25: ffff0008013f6080 x24: ffff00080cbf4800
x23: ffff000810842680 x22: ffff0008013f1080 x21: ffff00080cc86080
x20: ffff000806b463b0 x19: ffff00080cbf5a00 x18: 00000000ffffffff
x17: 707a5f657a696c61 x16: 0000000000000003 x15: 0000000000002200
x14: 00000000ffffffff x13: 00aaaaaa00aaaaaa x12: 0000000000000000
x11: ffff000817c6e2b8 x10: 0000000000000000 x9 : ffff80008106a950
x8 : ffff00080cbf48f4 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000438 x3 : 0000000000000438
x2 : ffff800082e245e0 x1 : 0000000000000008 x0 : 0000000000000000
Call trace:
dpu_plane_is_multirect_capable+0x68/0x90 (P)
dpu_crtc_atomic_check+0x5bc/0x650
drm_atomic_helper_check_planes+0x13c/0x220
drm_atomic_helper_check+0x58/0xb8
msm_atomic_check+0xd8/0xf0
drm_atomic_check_only+0x4a8/0x968
drm_atomic_commit+0x50/0xd8
drm_atomic_helper_update_plane+0x140/0x188
__setplane_atomic+0xfc/0x148
drm_mode_setplane+0x164/0x378
drm_ioctl_kernel+0xc0/0x140
drm_ioctl+0x20c/0x500
__arm64_sys_ioctl+0xbc/0xf8
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x48/0xf8
do_el0_svc+0x28/0x40
el0_svc+0x30/0xd0
el0t_64_sync_handler+0x144/0x168
el0t_64_sync+0x198/0x1a0
Code: b9402021 370fffc1 f9401441 3707ff81 (f94010a1)
---[ end trace 0000000000000000 ]---
Fixes: 3ed12a3664b36 ("drm/msm/dpu: allow sharing SSPP between planes")
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/669224/
Link: https://lore.kernel.org/r/20250819-v6-16-rc2-quad-pipe-upstream-v15-1-2c7a85089db8@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Drop the unused maxwidth field from the dpu_lm_sub_blks struct
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/653759/
Link: https://lore.kernel.org/r/20250514-max-mixer-width-v1-1-c8ba0d9bb858@oss.qualcomm.com
[DB: also handled SM8750 block]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
After a recent series to use FIELD_PREP and FIELD_MODIFY in
tidss_dispc.c, there are many errors when bitfield.h is not implicitly
included, such as when building allmodconfig for ARCH=hexagon:
drivers/gpu/drm/tidss/tidss_dispc.c:1116:2: error: call to undeclared function 'FIELD_MODIFY'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
1116 | VP_REG_FLD_MOD(dispc, hw_videoport, DISPC_VP_CONTROL, v,
| ^
drivers/gpu/drm/tidss/tidss_dispc.c:631:3: note: expanded from macro 'VP_REG_FLD_MOD'
631 | FIELD_MODIFY((mask), &_reg, (val)); \
| ^
drivers/gpu/drm/tidss/tidss_dispc.c:1140:2: error: call to undeclared function 'FIELD_MODIFY'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
1140 | FIELD_MODIFY(DISPC_VP_DSS_OLDI_CFG_MAP_MASK, &oldi_cfg,
| ^
drivers/gpu/drm/tidss/tidss_dispc.c:1203:10: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
1203 | FIELD_PREP(DISPC_VP_TIMING_H_SYNC_PULSE_MASK, hsw - 1) |
| ^
...
Explicitly include bitfield.h to resolve the errors.
Fixes: 9accc8b10de8 ("drm/tidss: dispc: Get rid of FLD_VAL")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250902-drm-tidss-fix-missing-bitfield-h-v1-1-aaad4a285f98@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Use poll_timeout_us() instead of open-coding the timeout loop.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250829113311.1930618-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The DTS code coding style expects exactly one space around '='
character.
Link: https://lore.kernel.org/r/20250819131641.86520-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The event_limit can be set by the PERF_EVENT_IOC_REFRESH to limit the
number of events. When the event_limit reaches 0, the POLL_HUP signal
should be sent. But it's missed.
The corresponding counter should be stopped when the event_limit reaches
0. It was implemented in the ARCH-specific code. However, since the
commit 9734e25fbf5a ("perf: Fix the throttle logic for a group"), all
the ARCH-specific code has been moved to the generic code. The code to
handle the event_limit was lost.
Add the event->pmu->stop(event, 0); back.
Fixes: 9734e25fbf5a ("perf: Fix the throttle logic for a group")
Closes: https://lore.kernel.org/lkml/aICYAqM5EQUlTqtX@li-2b55cdcc-350b-11b2-a85c-a78bff51fc11.ibm.com/
Reported-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: https://lkml.kernel.org/r/20250811182644.1305952-1-kan.liang@linux.intel.com
|
|
Cypress(Infineon) is not the vendor for this 43752 SDIO WLAN chip, and so
has not officially released any firmware binary for it. It is incorrect to
maintain this WLAN chip with firmware vendor ID as "CYW". So relabel the
chip's firmware Vendor ID as "WCC" as suggested by the maintainer.
Fixes: d2587c57ffd8 ("brcmfmac: add 43752 SDIO ids and initialization")
Fixes: f74f1ec22dc2 ("wifi: brcmfmac: add support for Cypress firmware api")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250724101136.6691-1-gokulkumar.sivakumar@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The world regulatory domain is a restrictive subset of channel
configurations which allows legal operation of the adapter all over the
world. Changing to this domain should not be prevented.
Fixes: dd4a9ac05c8e1 ("mwifiex: send regulatory domain info to firmware only if alpha2 changed") changed
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.con>
Link: https://patch.msgid.link/20250804-fix-mwifiex-regulatory-domain-v1-1-e4715c770c4d@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|