| Age | Commit message (Collapse) | Author |
|---|
|
This configuration is never used.
Remove it.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-7-d9b65750e49f@linutronix.de
|
|
On riscv32 the generic vDSO infrastructure is used but without its
time-related functionality. The Kconfig logic to implement this
treats HAVE_GENERIC_VDSO as a synonym for GENERIC_GETTIMEOFDAY.
This works today due to some underlying issues in how the generic vDSO
library works. Some future cleanups will break this logic.
Restructure the Kconfig logic, so HAVE_GENERIC_VDSO refers to the generic
library in general and GENERIC_GETTIMEOFDAY refers to its time-related
functionality.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-6-d9b65750e49f@linutronix.de
|
|
The generic vDSO can be used without the time-related functionality.
In that case the generic update_vsyscall() from kernel/time/vsyscall.c
should not be built.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-5-d9b65750e49f@linutronix.de
|
|
All calls of these functions are already gated behind CONFIG_TIME_NS. The
compiler will already optimize them away if time namespaces are disabled.
Drop the unnecessary stubs.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-4-d9b65750e49f@linutronix.de
|
|
The ENABLE_COMAPT_VDSO symbol is only used by arm64 and only for the
time-related functionality. There should be no new users, so it doesn't
need to be in the generic vDSO code.
Move the logic into arm64 architecture-specific code and replace the
explicit define by the standard '#ifdef __aarch64__'.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-3-d9b65750e49f@linutronix.de
|
|
The cntvct_ok variable has not had any external user since commit
c7a18100bdff ("lib/vdso: Avoid highres update if clocksource is not
VDSO capable").
It also only has one user in vdso.c, once during init, so rather than
having the caller of patch_vdso() initialize cntvct_ok, just call
cntvct_functional() directly and avoid the global variable entirely.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-2-d9b65750e49f@linutronix.de
|
|
When the generic vDSO does not provide time functions, as for example on
riscv32, then the time data store is not necessary.
Avoid allocating these time data pages when not used.
Fixes: df7fcbefa710 ("vdso: Add generic time data storage")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-1-d9b65750e49f@linutronix.de
|
|
This is only needed within the 'if' scope, not in the function scope.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250903083904.1972284-3-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Reduce the scope of the link_id variable in sta_set_sinfo to the 'if'
scope.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250903083904.1972284-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
hostapd & wpa_supplicant userspace daemons exposes an AP mode specific
config file parameter "ap_isolate" to the user, which is used to control
low-level bridging of frames between the stations associated in the BSS.
In driver, handle this user setting in the newly defined cfg80211_ops
function brcmf_cfg80211_change_bss() by enabling "ap_isolate" IOVAR in
the firmware.
In AP mode, the "ap_isolate" value from the cfg80211 layer represents,
0 = allow low-level bridging of frames between associated stations
1 = restrict low-level bridging of frames to isolate associated stations
-1 = do not change existing setting
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
[arend: indicate ap_isolate support in struct wiphy::bss_param_support]
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250817190435.1495094-5-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Assure user-space only modifies attributes for NL80211_CMD_SET_BSS
that are supported by the driver. This stricter checking is only done
when user-space commits to it by including NL80211_ATTR_BSS_PARAM.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250817190435.1495094-4-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The command NL80211_CMD_SET_BSS has a number of individual attributes
and the driver can advertise which of those it will handle when it is
changed by user-space. For drivers providing an empty .change_bss()
the callback has been removed.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250817190435.1495094-3-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The so-called fullmac devices rely on firmware functionality and/or API to
change BSS parameters. Today there are limited drivers supporting the
nl80211 primitive, but they only handle a subset of the bss parameters
passed if any. The mac80211 driver does handle all parameters and stores
their configured values. Some of the BSS parameters were already conditional
by wiphy->features. For these the wiphy->bss_param_support and wiphy->features
fields are silently aligned in wiphy_register(). Maybe better to issue a warning
instead when they are misaligned.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250817190435.1495094-2-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add new attributes to support EHT MCS/NSS Tx rates and EHT GI/LTF.
Parse EHT fixed MCS/NSS Tx rates and EHT GI/LTF values passed by the
userspace, validate and add as part of cfg80211_bitrate_mask.
MCS mask is constructed by new function, eht_build_mcs_mask(). Max NSS
supported for MCS rates of 7, 9, 11 and 13 is utilized to set MCS
bitmask for each NSS. MCS rates 14, and 15 if supported, are set only
for NSS = 0.
Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Link: https://patch.msgid.link/20250815213011.2704803-1-muna.sinada@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
during MLO
Commit 78a7a126dc5b ("wifi: mac80211: validate SCAN_FLAG_AP in scan request
during MLO") introduced a check that rejects scan requests if any link is
already beaconing. This works fine when all links share the same radio, but
breaks down in multi-radio setups.
Consider a scenario where a 2.4 GHz link is beaconing and a scan is
requested on a 5 GHz link, each backed by a different physical radio. The
current logic still blocks the scan, even though it should be allowed. As a
result, interface bring-up fails unnecessarily in valid configurations.
Fix this by checking whether the scan is being requested on the same
underlying radio as the beaconing link. Only reject the scan if it targets
a link that is already beaconing and the NL80211_FEATURE_AP_SCAN is not
set. This ensures correct behavior in multi-radio environments and avoids
false rejections.
Fixes: 78a7a126dc5b ("wifi: mac80211: validate SCAN_FLAG_AP in scan request during MLO")
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812-fix_scan_ap_flag_requirement_during_mlo-v4-3-383ffb6da213@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
cfg80211_get_radio_idx_by_chan()
In several instances where cfg80211_get_radio_idx_by_chan() is called,
redundant checks are performed across function — such as verifying if
wiphy->n_radio < 2 or if the returned index is negative. These checks are
unnecessary, as the return value can be directly compared. Moreover, the
function can be safely called even when radio-level properties are not
explicitly advertised since in such case in each call it is going to get
same error value.
Therefore, simplify the usage of this function across all such cases by
removing redundant conditions and relying on the return value directly.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812-fix_scan_ap_flag_requirement_during_mlo-v4-2-383ffb6da213@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If a valid radio index is not found, the function returns -ENOENT. If the
channel argument itself is invalid, it returns -EINVAL. However, since the
caller only checks for < 0, the distinction between these error codes is
not utilized much. Also, handling these two distinct error codes throughout
the codebase adds complexity, as both cases must be addressed separately. A
subsequent change aims to simplify this by using a single error code for
all invalid cases, making error handling more consistent and streamlined.
To support this change, update the return value to -EINVAL when a valid
radio index is not found. This is still appropriate because, even if the
channel argument is structurally valid, the absence of a corresponding
radio index implies that the argument is effectively invalid—otherwise, a
valid index would have been found.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812-fix_scan_ap_flag_requirement_during_mlo-v4-1-383ffb6da213@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for testing the 6 examples mentioned in IEEE80211-2024
Annex L. These tests cover the 3 mandatory decoding modes being
block bitmap, single AID and OLB alongside their equivalent
inverses.
Test output:
1..6
s1g_tim_block_test: Block 0 (ENC=BLOCK, blk_off=0, inverse=0)
s1g_tim_block_test: octet 1 (ctrl) : 00000000 (0x00)
s1g_tim_block_test: octet 2 (blk-map) : 00000101 (0x05)
s1g_tim_block_test: octet 3 (SB 0) : 01000010 (0x42)
s1g_tim_block_test: octet 4 (SB 2) : 10100000 (0xa0)
ok 1 s1g_tim_block_test
s1g_tim_single_test: Block 0 (ENC=SINGLE, blk_off=0, inverse=0)
s1g_tim_single_test: octet 1 (ctrl) : 00000001 (0x01)
s1g_tim_single_test: octet 2 (single) : 00011111 (0x1f)
ok 2 s1g_tim_single_test
s1g_tim_olb_test: Block 0 (ENC=OLB, blk_off=0, inverse=0)
s1g_tim_olb_test: octet 1 (ctrl) : 00000010 (0x02)
s1g_tim_olb_test: octet 2 (len= 9) : 00001001 (0x09)
s1g_tim_olb_test: octet 3 (SB 0) : 01000010 (0x42)
s1g_tim_olb_test: octet 4 (SB 1) : 10100000 (0xa0)
s1g_tim_olb_test: octet 5 (SB 2) : 01000010 (0x42)
s1g_tim_olb_test: octet 6 (SB 3) : 10100000 (0xa0)
s1g_tim_olb_test: octet 7 (SB 4) : 01000010 (0x42)
s1g_tim_olb_test: octet 8 (SB 5) : 10100000 (0xa0)
s1g_tim_olb_test: octet 9 (SB 6) : 01000010 (0x42)
s1g_tim_olb_test: octet 10 (SB 7) : 10100000 (0xa0)
s1g_tim_olb_test: octet 11 (SB 8) : 01000010 (0x42)
ok 3 s1g_tim_olb_test
s1g_tim_inverse_block_test: Block 0 (ENC=BLOCK, blk_off=0, inverse=1)
s1g_tim_inverse_block_test: octet 1 (ctrl) : 00000100 (0x04)
s1g_tim_inverse_block_test: octet 2 (blk-map) : 00000101 (0x05)
s1g_tim_inverse_block_test: octet 3 (SB 0) : 01000010 (0x42)
s1g_tim_inverse_block_test: octet 4 (SB 2) : 10100000 (0xa0)
ok 4 s1g_tim_inverse_block_test
s1g_tim_inverse_single_test: Block 0 (ENC=SINGLE, blk_off=0, inverse=1)
s1g_tim_inverse_single_test: octet 1 (ctrl) : 00000101 (0x05)
s1g_tim_inverse_single_test: octet 2 (single) : 00011111 (0x1f)
ok 5 s1g_tim_inverse_single_test
s1g_tim_inverse_olb_test: Block 0 (ENC=OLB, blk_off=0, inverse=1)
s1g_tim_inverse_olb_test: octet 1 (ctrl) : 00000110 (0x06)
s1g_tim_inverse_olb_test: octet 2 (len= 9) : 00001001 (0x09)
s1g_tim_inverse_olb_test: octet 3 (SB 0) : 01000010 (0x42)
s1g_tim_inverse_olb_test: octet 4 (SB 1) : 10100000 (0xa0)
s1g_tim_inverse_olb_test: octet 5 (SB 2) : 01000010 (0x42)
s1g_tim_inverse_olb_test: octet 6 (SB 3) : 10100000 (0xa0)
s1g_tim_inverse_olb_test: octet 7 (SB 4) : 01000010 (0x42)
s1g_tim_inverse_olb_test: octet 8 (SB 5) : 10100000 (0xa0)
s1g_tim_inverse_olb_test: octet 9 (SB 6) : 01000010 (0x42)
s1g_tim_inverse_olb_test: octet 10 (SB 7) : 10100000 (0xa0)
s1g_tim_inverse_olb_test: octet 11 (SB 8) : 01000010 (0x42)
ok 6 s1g_tim_inverse_olb_test
mac80211-s1g-tim: pass:6 fail:0 skip:0 total:6
Totals: pass:6 fail:0 skip:0 total:6
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250725132221.258217-4-lachlan.hodges@morsemicro.com
[make tim_push() void, non-inline]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
An S1G TIM PVB has 3 mandatory encoding modes, that being
block bitmap, single AID and OBL alongside the ability for
each encoding mode to be inverted. Introduce the ability to
parse the 3 encoding formats. The implementation specification
for the encoding formats can be found in IEEE80211-2024 9.4.2.5.
Signed-off-by: Arien Judge <arien.judge@morsemicro.com>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250725132221.258217-3-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
An S1G TIM PVB is encoded differently compared to a non-s1g TIM PVB.
As the AP dictates which encoding mode it uses, here we only implement
block bitmap encoding. This is the default encoding mode used by
all current vendor implementations.
Additionally, S1G has a maximum AID count of 8192, however we are
limiting the current implementation to 1600. This has no resemblence
to the standard and is purely an implementation detail. The reason for
this is due to the TIM elements maximum length of 255. This allows for,
at most, 25 encoded blocks for a PVB encoded with block bitmap. Support
for the maximum of 8192 AIDs will require an implementation of page slicing
to be added to mac80211.
As a result, we perform extra validation on both the STA and AP side
when receiving an AID as an S1G interface.
Add support for block bitmap encoding for an S1G AP and limit the
maximum AID count to 1600 for the current mac80211 implementations.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250725132221.258217-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next into HEAD
Miri Korenblit says:
====================
iwlwifi features, notably:
- more cleanups of d3 code
- cleanups of the transport layer
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Move some fields closer to where they are used, add missing tabs
and remove an extra newline.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
For ternary operators in the form of a ? true : false, if a itself returns
a boolean result, the ternary operator can be omitted. Remove redundant
ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Call the dedicated v4l2_disable_ioctl helper instead of manually
checking whether the current context is an encoder for the selection
api ioctls.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The existing imx8m_vpu_g1_irq implementation is an exact copy of the
default hantro_g1_irq one. Switch over to it instead of keeping a
duplicated implementation.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Jakub Kicinski says:
====================
eth: fbnic: support queue API and zero-copy Rx
Add support for queue API to fbnic, enable zero-copy Rx.
Patch 10 is likely of most interest as it adds a new core helper
(and touches mlx5). The rest of the patches are fbnic-specific
(and relatively boring).
Patches 1-3 reshuffle the Rx init/allocation path to better
align structures and functions which operate on them. Notably
patch 1 moves the page pool pointer to the queue struct (from NAPI).
Patch 4 converts the driver to use netmem_ref. The driver has
separate and explicit buffer queue for scatter / payloads, so only
references to those are converted.
Next 5 patches are more boring code shifts.
Patch 11 adds unreadable memory support to page pool allocation.
Patch 14 finally adds the support for queue API.
v2: https://lore.kernel.org/20250829012304.4146195-1-kuba@kernel.org
v1: https://lore.kernel.org/20250820025704.166248-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250901211214.1027927-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Support queue ops. fbnic doesn't shut down the entire device
just to restart a single queue.
./tools/testing/selftests/drivers/net/hw/iou-zcrx.py
TAP version 13
1..3
ok 1 iou-zcrx.test_zcrx
ok 2 iou-zcrx.test_zcrx_oneshot
ok 3 iou-zcrx.test_zcrx_rss
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Acked-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-15-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Queue API may ask us to allocate page pools when the device
is down, to validate that we ingested a memory provider binding.
Don't require NAPI to be passed to fbnic_alloc_qt_page_pools(),
to make calling fbnic_alloc_qt_page_pools() without NAPI possible.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-14-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We need to be more careful about when direct page pool recycling
is enabled in preparation for queue ops support. Don't set the
NAPI pointer, call page_pool_enable_direct_recycling() from
the function that activates the queue (once the config can
no longer fail).
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-13-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Allow allocating a page pool with unreadable memory for the payload
ring (sub1). We need to provide the queue ID so that the memory provider
can match the PP. Use the appropriate page pool DMA sync helper.
For unreadable mem the direction has to be FROM_DEVICE. The default
is BIDIR for XDP, but obviously unreadable mem is not compatible
with XDP in the first place, so that's fine. While at it remove
the define for page pool flags.
The rxq_idx is passed to fbnic_alloc_rx_qt_resources() explicitly
to make it easy to allocate page pools without NAPI (see the patch
after the next).
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-12-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mlx5 pokes into the rxq state to check if the queue has a memory
provider, and therefore whether it may produce unreadable mem.
Add a helper for doing this in the page pool API. fbnic will want
a similar thing (tho, for a slightly different reason).
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-11-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Factor out handling a single nv from fbnic_fill() to make
it reusable for queue ops.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-10-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Factor out handling a single nv from fbnic_enable() to make
it reusable for queue ops. Use a __ prefix for the factored
out code. The real fbnic_nv_enable() which will include
fbnic_wrfl() will be added with the qops, to avoid unused
function warnings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-9-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Factor out handling a single nv from fbnic_flush() to make
it reusable for queue ops.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-8-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Factor out handling a single nv from fbnic_disable() to make
it reusable for queue ops. Use a __ prefix for the factored
out code. The real fbnic_nv_disable() which will include
fbnic_wrfl() will be added with the qops, to avoid unused
function warnings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-7-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We'll add queue ops soon so. queue ops will opt the driver into
extra locking. Request this locking explicitly already to make
future patches smaller and easier to review.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-6-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use netmem_ref instead of struct page pointer in prep for
unreadable memory. fbnic has separate free buffer submission
queues for headers and for data. Refactor the helper which
returns page pointer for a submission buffer to take the
high level queue container, create a separate handler
for header and payload rings. This ties the "upcast" from
netmem to system page to use of sub0 which we know has
system pages.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-5-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
page pools are now at the ring level, move page pool alloc
to fbnic_alloc_rx_qt_resources(), and freeing to
fbnic_free_qt_resources().
This significantly simplifies fbnic_alloc_napi_vector() error
handling, by removing a late failure point.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move rxq_info and mem model registration from fbnic_alloc_napi_vector()
and fbnic_alloc_nv_resources() to fbnic_alloc_rx_qt_resources().
The rxq_info is now registered later in the process, but that
should not cause any issues.
rxq_info lives in the fbnic_q_triad (qt) struct so qt init is a more
natural place. Encapsulating the logic in the qt functions will also
allow simplifying the cleanup in the NAPI related alloc functions
in the next commit.
Rx does not have a dedicated fbnic_free_rx_qt_resources(),
but we can use xdp_rxq_info_is_reg() to tell whether given
rxq_info was in use (effectively - if it's a qt for an Rx queue).
Having to pass nv into fbnic_alloc_rx_qt_resources() is not
great in terms of layering, but that's temporary, pp will
move soon..
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In preparation for memory providers we need a closer association
between queues and page pools. We used to have a page pool at the
NAPI level to serve all associated queues but with MP the queues
under a NAPI may no longer be created equal.
The "ring" structure in fbnic is a descriptor ring. We have separate
"rings" for payload and header pages ("to device"), as well as a ring
for completions ("from device"). Technically we only need the page
pool pointers in the "to device" rings, so adding the pointer to
the ring struct is a bit wasteful. But it makes passing the structures
around much easier.
For now both "to device" rings store a pointer to the same
page pool. Using more than one queue per NAPI is extremely rare
so don't bother trying to share a single page pool between queues.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit d968e50b5c26 ("media: rkvdec: Unstage the driver") moves the driver
from staging/media/ to media/platform/rockchip/ and adds a new section
ROCKCHIP RKVDEC VIDEO DECODER DRIVER in MAINTAINERS. It seems that it was
overlooked that the section ROCKCHIP VIDEO DECODER DRIVER in MAINTAINERS
already existed, referring to the same files before the driver was moved
as the new section refers to after the driver was moved.
So, merge the information from the two sections for ROCKCHIP (RKVDEC) VIDEO
DECODER DRIVER into one. This essentially results in adding the maintainer
of the previously existing section in the new section and then removing
that previously existing section.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Commit 4a81656c8eaa ("arm64: dts: mediatek: mt8188: Address binding
warnings for MDP3 nodes") caused a regression on the MDP functionality
when it removed the MT8195 compatibles from the MDP3 nodes, since the
MT8188 compatible was not yet listed as a possible MDP component
compatible in mdp_comp_dt_ids. This resulted in an empty output
bitstream when using the MDP from userspace, as well as the following
errors:
mtk-mdp3 14001000.dma-controller: Uninit component inner id 4
mtk-mdp3 14001000.dma-controller: mdp_path_ctx_init error 0
mtk-mdp3 14001000.dma-controller: CMDQ sendtask failed: -22
Add the missing compatible to the array to restore functionality.
Fixes: 4a81656c8eaa ("arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add Flydigi Apex 5 to the list of recognized controllers.
Reported-by: Brandon Lin <brandon@emergence.ltd>
Reported-by: Sergey Belozyorcev <belozyorcev@ya.ru>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250903165114.2987905-1-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The .querystd callback should not program the device with the detected
standard, it should only report the standard to user-space. User-space
may then use .s_std to set the standard, if it wants to use it.
All that is required of .querystd is to setup the auto detection of
standards and report its findings.
While at it add some documentation on why this can't happen while
streaming and improve the error handling using a scoped guard.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The .s_std callback should not write the new format directly do the
device, it should only store it and have it applied by .s_stream.
As .s_stream already calls adv7180_program_std() all that is needed
is to check the standard is valid, and store it for .s_stream to
program.
While at it add a scoped guard to simplify the error handling.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The .set_fmt callback should not write the new format directly do the
device, it should only store it and have it applied by .s_stream.
The .s_stream callback already calls adv7180_set_field_mode() so it's
safe to remove programming of the device and just store the format and
have .s_stream apply it.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The s_power callback is used a bit oddly in adv7180, the callback
adv7180_set_power() do not control power to the chip itself, but
rather the power to the chips decoder.
When the decoder is powered the chip process video data, or if no video
source is available freeruns. When the decoder is off the device i2c
registers are still powered and the device can be configured.
In the current s_power implementation the device starts to transmit
video data as soon as it's powered, and the s_stream operation only
tracks if s_stream have been called or not.
The actual configuration of the device happens when the configuration
IOCTLs are called. Sometimes with very odd implementations where the
decoder have to first be power off, the device configured, and then
unconditionally power on, see adv7180_set_pad_format() for an example.
As a first step to remedy this remove the s_power callback altogether
and instead completely initialize the device from s_stream. Future work
will clean up the IOCTL callbacks that directly configures the device
that is also done by init_device().
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The two different tasks of resetting and initializing the devices, and
configured the video formats are grouped lumped together in a single
function. These two tasks are then only performed at probe time, or when
resuming from suspend. Configuration of formats are then done directly
by the IOCTL callbacks, such as .set_fmt.
Prepare for reworking the driver to only reset the device at probe and
resume, and configuring all video formats in .s_stream instead of in
each IOCTL callback by splitting the two tasks in two different
functions.
At this point there is no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Some variants of the chip (ADV7180) have it's decoder powered up after
reset, while others (ADV7280, ADV7281, ADV7282, ADV7283) have it powered
down.
This is tracked by the feature flag ADV7180_FLAG_RESET_POWERED. At probe
this flag is used to initialize the state variable powered which keeps
track of if the decoder is powered on, or off, for the resume callback.
This however misses that the decoder needs to be powered off for some
configuration of the device to take hold. So for devices where it's left
on (ADV7180) the format configuration at probe time have little effect.
This worked as the .set_fmt callback powers down the decoder, updates
the format, and powers back on the decoder.
Before moving all configuration to .s_stream this needs to be fixed.
Instead of tracking if the decoder is powered on or off, use the
flag to determine if needs to be powered down after a reset to do the
configuration.
To keep the behavior consistent with the currents implementation switch
the decoder back on for devices where this is the reset behavior. The
primary reason for this is that if not done the first 35+ frames or so
of the capture session is garbage.
To keep the support of starting the decoder when resuming from sleep on
devices where the reset behavior is to start with the decoder powered
off, use the state variable streaming. If it is set the decoder was
powered on when the system suspended so we know to start it again when
resuming.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix typo in comment: where -> were]
|
|
The device initialization code resets the whole device, thus the initial
controls set at probe are lost as adv7180_init_controls() are called
before init_device(). Additionally the controls were never restored
after the device where reset coming back from suspend.
Solve this by separate the setup of the controls from the creation of
them, and always set them up when the device is reset.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
