| Age | Commit message (Collapse) | Author |
|---|
|
It reports a MIN value -15360 for volume control, but will mute when
setting it less than -14208
Tested-by: Guoli An <anguoli@uniontech.com>
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250903-sound-v1-4-d4ca777b8512@uniontech.com
|
|
- QUIRK_FLAG_MIXER_CAPTURE_MIN_MUTE
- QUIRK_FLAG_MIXER_PLAYBACK_MIN_MUTE
Suggested-by: Guoli An <anguoli@uniontech.com>
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250903-sound-v1-3-d4ca777b8512@uniontech.com
|
|
The same hardware problem to QUIRK_FLAG_MIXER_PLAYBACK_MIN_MUTE also
occurs on the capture streams on some USB devices. Add a new flag for
processing the quirk.
Link: https://lore.kernel.org/all/C22C1A172EBB9BD9+eccc2e4a-d21e-4a7d-848c-bbf3982feb94@uniontech.com/
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250903-sound-v1-2-d4ca777b8512@uniontech.com
|
|
QUIRK_FLAG_MIXER_PLAYBACK_MIN_MUTE
As a preparation of introduction QUIRK_FLAG_MIXER_CAPTURE_MIN_MUTE
Also make it printing an info while applying
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250903-sound-v1-1-d4ca777b8512@uniontech.com
|
|
Commit 9b47105f5434 ("clk: qcom: dispcc-qcs615: Add QCS615 display clock
controller driver") adds the config QCS_DISPCC_615, which selects the
non-existing config QCM_GCC_615. Probably, this is just a three-letter
abbreviation mix-up here, though. There is a config named QCS_GCC_615,
and the related config QCS_CAMCC_615 selects that config.
Fix the typo and use the intended config name in the select command.
Fixes: 9b47105f5434 ("clk: qcom: dispcc-qcs615: Add QCS615 display clock controller driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250902121754.277452-1-lukas.bulwahn@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The devm_clk_hw_get_clk() function doesn't return NULL, it returns error
pointers. Update the checking to match.
Fixes: 8737ec830ee3 ("clk: qcom: common: Add interconnect clocks support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/aLaPwL2gFS85WsfD@stanley.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Note that prior to running the Coccinelle,
clk_alpha_pll_postdiv_round_ro_rate() was renamed to
clk_alpha_pll_postdiv_ro_round_rate().
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250828-clk-round-rate-v2-v1-2-b97ec8ba6cc4@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'struct qcom_cc_desc' is passed to qcom_cc_map() and
qcom_cc_really_probe() only as pointer to const, so make the memory
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250820124821.149141-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This adds support for the Microchip LAN969x ARMv8-based SoC switch family.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Currently, Microchip SparX-5 SoC is supported and it has its own symbol.
However, this means that new Microchip platforms that share drivers need
to constantly keep updating depends on various drivers.
So, to try and reduce this lets add ARCH_MICROCHIP symbol that drivers
could instead depend on.
LAN969x is being worked on and it will be added under ARCH_MICROCHIP.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Make sure to drop the reference to the secure monitor device taken by
of_find_device_by_node() when looking up its driver data on behalf of
other drivers (e.g. during probe).
Note that holding a reference to the platform device does not prevent
its driver data from going away so there is no point in keeping the
reference after the helper returns.
Fixes: 8cde3c2153e8 ("firmware: meson_sm: Rework driver as a proper platform driver")
Cc: stable@vger.kernel.org # 5.5
Cc: Carlo Caione <ccaione@baylibre.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250725074019.8765-1-johan@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Users report being able to boot (u-boot) from SD card but kernel
init then fails to mount partitions on the card containing boot
media resulting in first-boot failure. System logs show only the
probe of the mmc devices: the SD card is seen, but no partitions
are found so init fails to mount them and boot stalls.
Reducing the speed of the SD card from 50MHz to 35MHz results in
complete probing of the card and successful boot.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250505143700.4029484-1-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
As per T7 datasheet add missing cache information to the Amlogic T7 SoC.
- Each Cortex-A53 core has 32 KB of instruction cache and
32 KB of L1 data cache available.
- Each Cortex-A73 core has 64 KB of L1 instruction cache and
64 KB of L1 data cache available.
- The little (A53) cluster has 256 KB of unified L2 cache available.
- The big (A73) cluster has 1 MB of unified L2 cache available.
Cache memory significantly reduces the time it takes for the CPU
to access data and instructions, leading to faster program execution
and overall system responsiveness.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250825065240.22577-12-linux.amoon@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
As per S922X datasheet add missing cache information to the Amlogic
S922X SoC.
- Each Cortex-A53 core has 32 KB of instruction cache and
32 KB of L1 data cache available.
- Each Cortex-A73 core has 64 KB of L1 instruction cache and
64 KB of L1 data cache available.
- The little (A53) cluster has 256 KB of unified L2 cache available.
- The big (A73) cluster has 1 MB of unified L2 cache available.
Cache memory significantly reduces the time it takes for the CPU
to access data and instructions, leading to faster program execution
and overall system responsiveness.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250825065240.22577-11-linux.amoon@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
As per S7 datasheet add missing cache information to the Amlogic S7 SoC.
ARM Cortex-A55 CPU uses unified L2 cache.
- Each Cortex-A55 core has 32KB of L1 instruction cache available and
32KB of L1 data cache available.
- Along with 256KB Unified L2 cache.
Cache memory significantly reduces the time it takes for the CPU
to access data and instructions, leading to faster program execution
and overall system responsiveness.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250825065240.22577-10-linux.amoon@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
As per C3 datasheet add missing cache information to the Amlogic C3 SoC.
- Each Cortex-A53 core has 32KB of L1 instruction cache available and
32KB of L1 data cache available.
- Along with 512KB Unified L2 cache.
Cache memory significantly reduces the time it takes for the CPU
to access data and instructions, leading to faster program execution
and overall system responsiveness.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250825065240.22577-9-linux.amoon@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
As per A4 datasheet add missing cache information to the Amlogic A4 SoC.
- Each Cortex-A53 core has 32KB of L1 instruction cache available and
32KB of L1 data cache available.
- Along with 512KB Unified L2 cache.
Cache memory significantly reduces the time it takes for the CPU
to access data and instructions, leading to faster program execution
and overall system responsiveness.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250825065240.22577-8-linux.amoon@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
As per the A1 datasheet add missing cache information to the Amlogic A1
SoC.
- Each Cortex-A53 core has 32KB of L1 instruction cache available and
32KB of L1 data cache available.
- Along with 512KB Unified L2 cache.
Cache memory significantly reduces the time it takes for the CPU
to access data and instructions, leading to faster program execution
and overall system responsiveness.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250825065240.22577-7-linux.amoon@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
As per the GXM datasheet add missing cache information to the Amlogic GXM
SoC.
- Each Cortex-A53 core has 32KB of L1 instruction cache available and
32KB of L1 data cache available.
- Along with 512KB Unified L2 cache.
Cache memory significantly reduces the time it takes for the CPU
to access data and instructions, leading to faster program execution
and overall system responsiveness.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250825065240.22577-6-linux.amoon@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
As per the AXG datasheet add missing cache information to the Amlogic AXG
SoC.
- Each Cortex-A53 core has 32KB of L1 instruction cache available and
32KB of L1 data cache available.
- Along with 512KB Unified L2 cache.
Cache memory significantly reduces the time it takes for the CPU
to access data and instructions, leading to faster program execution
and overall system responsiveness.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250825065240.22577-5-linux.amoon@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
As per the S905X2 datasheet add missing cache information to the Amlogic
G12A SoC.
- Each Cortex-A53 core has 32KB of L1 instruction cache available and
32KB of L1 data cache available.
- Along with 512KB Unified L2 cache.
Cache memory significantly reduces the time it takes for the CPU
to access data and instructions, leading to faster program execution
and overall system responsiveness.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250825065240.22577-4-linux.amoon@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
As per S905X3 datasheet add missing cache information to the Amlogic
SM1 SoC. ARM Cortex-A55 CPU uses unified L3 cache instead of L2 cache.
- Each Cortex-A55 core has 32KB of L1 instruction cache available and
32KB of L1 data cache available.
- Along with 256KB Unified L2 cache.
Cache memory significantly reduces the time it takes for the CPU
to access data and instructions, leading to faster program execution
and overall system responsiveness.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250825065240.22577-3-linux.amoon@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
As per S905 and S905X datasheet add missing cache information to
the Amlogic GXBB and GXL SoC.
- Each Cortex-A53 core has 32KB of L1 instruction cache available and
32KB of L1 data cache available.
- Along with 512KB Unified L2 cache.
Cache memory significantly reduces the time it takes for the CPU
to access data and instructions, leading to faster program execution
and overall system responsiveness.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250825065240.22577-2-linux.amoon@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The 'desc' local variable in nmk_gpio_dbg_show_one() is now only used
with CONFIG_PINCTRL_NOMADIK enabled so wrap its declaration with an
appropriate ifdef.
Fixes: ddeb66d2cb10 ("gpio: nomadik: don't print out global GPIO numbers in debugfs callbacks")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509032125.nXBcPuaf-lkp@intel.com/
Link: https://lore.kernel.org/r/20250903131903.95100-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add the RTC controller node for C3 SoC family.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250717-rtc-c3-node-v1-2-4f9ae059b8e6@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into gpio/for-next
Immutable branch between the MFD and GPIO trees for v6.18-rc1
Allow building the MFD STMPE driver as module.
|
|
Export the core probe and remove function to be used by i2c and spi
drivers. Also add necessary module information so the drivers can be built
as modules. This reduces footprint of the driver is enabled but unused.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250819070458.1027883-1-alexander.stein@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://lore.kernel.org/r/20250828122649.39574-1-liaoyuanhong@vivo.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Read the device tree configuration and use it to set the interrupt type.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Inochi Amaoto <inochiama@gmail.com> # Sophgo SRD3-10
Link: https://lore.kernel.org/all/b22d2b0a00a96161253435d17b3c66538f3ba1c2.1756953919.git.unicorn_wang@outlook.com
|
|
Fix msi irq type to be the correct type, although this field is not used yet.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Inochi Amaoto <inochiama@gmail.com> # Sophgo SRD3-10
Link: https://lore.kernel.org/all/c38b9b1682af978473705b7e70b6faaa36fe5024.1756953919.git.unicorn_wang@outlook.com
|
|
Fix msi irq type to be the correct type, although this field is not used yet.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/831c1b650c575380d56ef3e2faed9bee278c9006.1756953919.git.unicorn_wang@outlook.com
|
|
The PCI Local Bus Specification 3.0 (section 6.8.1.6) allows modifying the
low-order bits of the MSI Message DATA register to encode nr_irqs interrupt
numbers in the log2(nr_irqs) bits for the domain.
The problem arises if the base vector (GICV2m base spi) is not aligned with
nr_irqs; in this case, the low-order log2(nr_irqs) bits from the base
vector conflict with the nr_irqs masking, causing the wrong MSI interrupt
to be identified.
To fix this, use bitmap_find_next_zero_area_off() instead of
bitmap_find_free_region() to align the initial base vector with nr_irqs.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250902091045.220847-1-christian.bruel@foss.st.com
|
|
In partitioned systems, the domain ID is unique in the partition and a
package can have multiple partitions.
Some user-space tools, such as turbostat, assume the domain ID is unique
per package. These tools map CPU power domains, which are unique to a
package. However, this approach does not work in partitioned systems.
There is no architectural definition of "partition" to present to user
space.
To support these tools, set the domain_id to be unique per package. For
compute die IDs, uniqueness can be achieved using the platform info
cdie_mask, mirroring the behavior observed in non-partitioned systems.
For IO dies, which lack a direct CPU relationship, any unique logical
ID can be assigned. Here domain IDs for IO dies are configured after all
compute domain IDs. During the probe, keep the index of the next IO
domain ID after the last IO domain ID of the current partition. Since
CPU packages are symmetric, partition information is same for all
packages.
The Intel Speed Select driver has already implemented a similar change
to make the domain ID unique, with compute dies listed first, followed
by I/O dies.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250903191154.1081159-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add extra error messages that are used by ThinkCenter platforms.
Signed-off-by: Kean Ren <kean0048@gmail.com>
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250903173824.1472244-4-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
ThinkCenter platforms use a different set of GUIDs along with some
differences in implementation details for their support of
certificate based authentication.
Update the think-lmi driver to work correctly on these platforms.
Tested on M75q Gen 5.
Signed-off-by: Kean Ren <kean0048@gmail.com>
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250903173824.1472244-3-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add a certificate GUID structure to make it easier to add different
options for other platforms that need different GUIDs.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250903173824.1472244-2-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
support ADSP
Manage clock settings for ADSP solution. On Existing ADSP bypass
solutions, the macro and dcodec GDSCs are enabled using power domains
in lpass-va-macro which is not applicable for ADSP based platform.
Co-developed-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20250903151337.1037246-2-mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If a proximity event node is defined so as to specify the wake-up
properties of the touch surface, the proximity event interrupt is
enabled unconditionally. This may result in unwanted interrupts.
Solve this problem by enabling the interrupt only if the event is
mapped to a key or switch code.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/aKJxxgEWpNaNcUaW@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Fully power down the jack detection on system suspend since the device
will not be powered up during.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-ID: <20250903094549.271068-5-ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the MFD driver disables all the IRQs upon entering system
suspend, however there are some issues with this approach. As this
device uses runtime force suspend.
The regmap IRQ handler can run, claim a PM runtime reference and get
scheduled, the MFD can then force suspend. When the IRQ thread gets
rescheduled it will try to access volatile registers on the
suspended device. Furthermore, this race also applies to work queue
items scheduled by the IRQ handlers.
As the MFD code doesn't know about the individual work queue items, the
end drivers must mask their own IRQs and sync in any work queues as part
of entering system suspend. Update the code here to do so.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-ID: <20250903094549.271068-4-ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To support future refactoring store a pointer to the IRQ domain in the
codec private data allowing easier access to it outside of probe.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-ID: <20250903094549.271068-3-ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is some confusion around cs42l43_codec_runtime_force_suspend().
This function is the system suspend callback, however the name and
the debug print both use the words runtime. Rename the function to
the simpler cs42l43_codec_suspend() and correct the debug print.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-ID: <20250903094549.271068-2-ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove some padding holes in the sdca_entity_hide struct by reordering
the members.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-ID: <20250820163717.1095846-4-ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The detected mode IRQ handler should return an irqreturn_t not a regular
error code. Correct the return value in detected_mode_handler().
Fixes: b9ab3b618241 ("ASoC: SDCA: Add some initial IRQ handlers")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-ID: <20250820163717.1095846-3-ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MBQ size function returns an integer representing the size of a
Control. Currently if the Control is not found the function will return
false which makes little sense. Correct this typo to return -EINVAL.
Fixes: e3f7caf74b79 ("ASoC: SDCA: Add generic regmap SDCA helpers")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-ID: <20250820163717.1095846-2-ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a list of the wm8960 pin names to the binding's description to make
it self-contained and improve the user experience for board developers.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20250903160119.83625-4-jihed.chaibi.dev@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a list of the nau8825 pin names to the binding's description to make
it self-contained and improve the user experience for board developers.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20250903160119.83625-3-jihed.chaibi.dev@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a list of the es8316 pin names to the binding's description to make
it self-contained and improve the user experience for board developers.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20250903160119.83625-2-jihed.chaibi.dev@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
failed
If earlier opening of source graph fails (e.g. ADSP rejects due to
incorrect audioreach topology), the graph is closed and
"dai_data->graph[dai->id]" is assigned NULL. Preparing the DAI for sink
graph continues though and next call to q6apm_lpass_dai_prepare()
receives dai_data->graph[dai->id]=NULL leading to NULL pointer
exception:
qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001002 cmd
qcom-apm gprsvc:service:2:1: DSP returned error[1001002] 1
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: fail to start APM port 78
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on TX_CODEC_DMA_TX_3: -22
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8
...
Call trace:
q6apm_graph_media_format_pcm+0x48/0x120 (P)
q6apm_lpass_dai_prepare+0x110/0x1b4
snd_soc_pcm_dai_prepare+0x74/0x108
__soc_pcm_prepare+0x44/0x160
dpcm_be_dai_prepare+0x124/0x1c0
Fixes: 30ad723b93ad ("ASoC: qdsp6: audioreach: add q6apm lpass dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Message-ID: <20250904101849.121503-2-krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It is a silly oneliner anyway. Replace it with its equivalent.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
