| Age | Commit message (Collapse) | Author |
|---|
|
The function is called so because for older devices it sets a bit called
"init_done". But for the latest devices it sets a different bit,
"mac_init". Since this name is not clear anyway, rename it such that it
indicates the logic of the newer devices.
Also add the 'trans' prefix so iw will be clear from the name that this
is a transport API.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.a1de688e574b.Ibd41b0c8f7fbae77026e76dbbc085df3eecec538@changeid
|
|
Convert STATUS_SUPPRESS_CMD_ERROR_ONCE from a status bit to a simple
bool field in struct iwl_trans, as atomicity is not needed.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.b33366c11a45.I75aac05afd8c4d8ef217d03327c1a027d6e7667e@changeid
|
|
Add iwl_trans_notify_fw_error() and iwl_trans_is_fw_error() for use by
op modes. These helpers provide a clean interface for marking and
checking firmware error state. This hides the trans internal
implementation details from callers.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.23f5160b3265.Iba325ffa4c6c6f7fc3a702fb6c1827b0857d0db3@changeid
|
|
vdso_test_abi provides the exact same functionality, properly uses
kselftest.h and explicitly calls into the vDSO without relying on the libc.
Drop the pointless testcase.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-8-90f499dd35f8@linutronix.de
|
|
To be y2038-safe, 32-bit userspace needs to explicitly call the 64-bit safe
time APIs. For this the 32-bit vDSOs contains a clock_gettime() variant
which always uses 64-bit time types.
Also test this vDSO function.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-7-90f499dd35f8@linutronix.de
|
|
The structure is already there anyways, so test the CPUTIME clocks, too.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-6-90f499dd35f8@linutronix.de
|
|
The array relies on the numeric values of the clock IDs.
When reading the code it is not obvious that the order is correct.
Make the code easier to read by using explicit indices.
While at it make the array static.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-5-90f499dd35f8@linutronix.de
|
|
The test uses the kselftest.h framework and declares in its testplan to
always execute 16 testcases. If any of the clockids were not available,
the testplan would not be satisfied anymore and the test would fail.
Apparently that never happened, so the clockids are always available.
Remove the pointless checks.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-4-90f499dd35f8@linutronix.de
|
|
The existing logic is just an open-coded ksft_finished().
Replace it with the real thing.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-3-90f499dd35f8@linutronix.de
|
|
If AT_SYSINFO_EHDR is missing the whole test needs to be skipped.
Currently this results in the following output:
TAP version 13
1..16
# AT_SYSINFO_EHDR is not present!
This output is incorrect, as "1..16" still requires the subtest lines to
be printed, which isn't done however.
Switch to the correct skipping functions, so the output now correctly
indicates that no subtests are being run:
TAP version 13
1..0 # SKIP AT_SYSINFO_EHDR is not present!
Fixes: 693f5ca08ca0 ("kselftest: Extend vDSO selftest")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-2-90f499dd35f8@linutronix.de
|
|
The _rval register variable is meant to be an output operand of the asm
statement but is instead used as input operand.
clang 20.1 notices this and triggers -Wuninitialized warnings:
tools/testing/selftests/timers/auxclock.c:154:10: error: variable '_rval' is uninitialized when used here [-Werror,-Wuninitialized]
154 | return VDSO_CALL(self->vdso_clock_gettime64, 2, clockid, ts);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/testing/selftests/timers/../vDSO/vdso_call.h:59:10: note: expanded from macro 'VDSO_CALL'
59 | : "r" (_rval) \
| ^~~~~
tools/testing/selftests/timers/auxclock.c:154:10: note: variable '_rval' is declared here
tools/testing/selftests/timers/../vDSO/vdso_call.h:47:2: note: expanded from macro 'VDSO_CALL'
47 | register long _rval asm ("r3"); \
| ^
It seems the list of input and output operands have been switched around.
However as the argument registers are not always initialized they can not
be marked as pure inputs as that would trigger -Wuninitialized warnings.
Adding _rval as another input and output operand does also not work as it
would collide with the existing _r3 variable.
Instead reuse _r3 for both the argument and the return value.
Fixes: 6eda706a535c ("selftests: vDSO: fix the way vDSO functions are called for powerpc")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-1-90f499dd35f8@linutronix.de
Closes: https://lore.kernel.org/oe-kbuild-all/202506180223.BOOk5jDK-lkp@intel.com/
|
|
Hangbin Liu says:
====================
bonding: support aggregator selection based on port priority
This patchset introduces a new per-port bonding option: `ad_actor_port_prio`.
It allows users to configure the actor's port priority, which can then be used
by the bonding driver for aggregator selection based on port priority.
This provides finer control over LACP aggregator choice, especially in setups
with multiple eligible aggregators over 2 switches.
====================
Link: https://patch.msgid.link/20250902064501.360822-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add comprehensive selftest to verify:
- Per-port actor priority setting via ad_actor_port_prio
- Aggregator selection behavior with port_priority ad_select policy
Also move cmd_jq helper from forwarding/lib.sh to net/lib.sh for
broader reusability across network selftests.
Here is the result output
# ./bond_lacp_prio.sh
TEST: bond 802.3ad (ad_actor_port_prio setting) [ OK ]
TEST: bond 802.3ad (ad_actor_port_prio select) [ OK ]
TEST: bond 802.3ad (ad_actor_port_prio switch) [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-4-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a new ad_select policy 'port_priority' that uses the per-port
actor priority values (set via ad_actor_port_prio) to determine
aggregator selection.
This allows administrators to influence which ports are preferred
for aggregation by assigning different priority values, providing
more flexible load balancing control in LACP configurations.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-3-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce a new netlink attribute 'actor_port_prio' to allow setting
the LACP actor port priority on a per-slave basis. This extends the
existing bonding infrastructure to support more granular control over
LACP negotiations.
The priority value is embedded in LACPDU packets and will be used by
subsequent patches to influence aggregator selection policies.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
LAN969x uses the Atmel crypto, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
LAN969x uses the Atmel HWRNG, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
LAN969x uses the Atmel TWI I2C, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
LAN969x uses the Atmel SPI, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
LAN969x uses the Atmel USART serial, so make it selectable for
ARCH_MICROCHIP to avoid needing to update depends in future if other
Microchip SoC-s use it as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
LAN969x uses the Atmel USART, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Gma500 unnecessarily clears the framebuffer's GEM-object pointer
before calling drm_framebuffer_cleanup(). Remove this code to make
gma500 consistent with the rest of the drivers.
The change is cosmetic, as drm_framebuffer_cleanup() does not
touch the object pointer on gma500.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250904121157.395128-1-tzimmermann@suse.de
|
|
Define the Ports Phy Histogram Configuration Register (PPHCR) to expose
RS-FEC histogram bin ranges, and expose a new counter group in the Ports
Performance Counters Register (PPCNT) to report the corresponding
histogram values.
Co-developed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1756884600-520195-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Pass the right type of flag to vcpu_dat_fault_handler(); it expects a
FOLL_* flag (in particular FOLL_WRITE), but FAULT_FLAG_WRITE is passed
instead.
This still works because they happen to have the same integer value,
but it's a mistake, thus the fix.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: 05066cafa925 ("s390/mm/fault: Handle guest-related program interrupts in KVM")
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
If mmu_notifier_register() fails, for example because a signal was
pending, the mmu_notifier will not be registered. But when the VM gets
destroyed, it will get unregistered anyway and that will cause one
extra mmdrop(), which will eventually cause the mm of the process to
be freed too early, and cause a use-after free.
This bug happens rarely, and only when secure guests are involved.
The solution is to check the return value of mmu_notifier_register()
and return it to the caller (ultimately it will be propagated all the
way to userspace). In case of -EINTR, userspace will try again.
Fixes: ca2fd0609b5d ("KVM: s390: pv: add mmu_notifier")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
When you run a KVM guest with vhost-net and migrate that guest to
another host, and you immediately enable postcopy after starting the
migration, there is a big chance that the network connection of the
guest won't work anymore on the destination side after the migration.
With a debug kernel v6.16.0, there is also a call trace that looks
like this:
FAULT_FLAG_ALLOW_RETRY missing 881
CPU: 6 UID: 0 PID: 549 Comm: kworker/6:2 Kdump: loaded Not tainted 6.16.0 #56 NONE
Hardware name: IBM 3931 LA1 400 (LPAR)
Workqueue: events irqfd_inject [kvm]
Call Trace:
[<00003173cbecc634>] dump_stack_lvl+0x104/0x168
[<00003173cca69588>] handle_userfault+0xde8/0x1310
[<00003173cc756f0c>] handle_pte_fault+0x4fc/0x760
[<00003173cc759212>] __handle_mm_fault+0x452/0xa00
[<00003173cc7599ba>] handle_mm_fault+0x1fa/0x6a0
[<00003173cc73409a>] __get_user_pages+0x4aa/0xba0
[<00003173cc7349e8>] get_user_pages_remote+0x258/0x770
[<000031734be6f052>] get_map_page+0xe2/0x190 [kvm]
[<000031734be6f910>] adapter_indicators_set+0x50/0x4a0 [kvm]
[<000031734be7f674>] set_adapter_int+0xc4/0x170 [kvm]
[<000031734be2f268>] kvm_set_irq+0x228/0x3f0 [kvm]
[<000031734be27000>] irqfd_inject+0xd0/0x150 [kvm]
[<00003173cc00c9ec>] process_one_work+0x87c/0x1490
[<00003173cc00dda6>] worker_thread+0x7a6/0x1010
[<00003173cc02dc36>] kthread+0x3b6/0x710
[<00003173cbed2f0c>] __ret_from_fork+0xdc/0x7f0
[<00003173cdd737ca>] ret_from_fork+0xa/0x30
3 locks held by kworker/6:2/549:
#0: 00000000800bc958 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x7ee/0x1490
#1: 000030f3d527fbd0 ((work_completion)(&irqfd->inject)){+.+.}-{0:0}, at: process_one_work+0x81c/0x1490
#2: 00000000f99862b0 (&mm->mmap_lock){++++}-{3:3}, at: get_map_page+0xa8/0x190 [kvm]
The "FAULT_FLAG_ALLOW_RETRY missing" indicates that handle_userfaultfd()
saw a page fault request without ALLOW_RETRY flag set, hence userfaultfd
cannot remotely resolve it (because the caller was asking for an immediate
resolution, aka, FAULT_FLAG_NOWAIT, while remote faults can take time).
With that, get_map_page() failed and the irq was lost.
We should not be strictly in an atomic environment here and the worker
should be sleepable (the call is done during an ioctl from userspace),
so we can allow adapter_indicators_set() to just sleep waiting for the
remote fault instead.
Link: https://issues.redhat.com/browse/RHEL-42486
Signed-off-by: Peter Xu <peterx@redhat.com>
[thuth: Assembled patch description and fixed some cosmetical issues]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: f65470661f36 ("KVM: s390/interrupt: do not pin adapter interrupt pages")
[frankja: Added fixes tag]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
for_each_set_bit() expects size to be in bits, not bytes. The abox mask
iteration uses bytes, but it works by coincidence, because the local
variable holding the mask is unsigned long, and the mask only ever has
bit 2 as the highest bit. Using a smaller type could lead to subtle and
very hard to track bugs.
Fixes: 62afef2811e4 ("drm/i915/rkl: RKL uses ABOX0 for pixel transfers")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org # v5.9+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250905104149.1144751-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 7ea3baa6efe4bb93d11e1c0e6528b1468d7debf6)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
Tariq Toukan says:
====================
Support exposing raw cycle counters in PTP and mlx5
This series by Carolina adds support in ptp and usage in mlx5 for
exposing the raw free-running cycle counter of PTP hardware clocks.
This is V2. Find previous one here:
https://lore.kernel.org/all/1752556533-39218-1-git-send-email-tariqt@nvidia.com/
Find detailed description by Carolina below [1].
[1]
This patch series introduces support for exposing the raw free-running
cycle counter of PTP hardware clocks. When the device is in free-running
mode, it emits timestamps as raw cycle values instead of nanoseconds.
These values may be passed directly to user space through:
- fwctl: exposes internal device event records that include raw
cycle-based timestamps.
- DPDK: retrieves CQEs that contain raw cycle counters, which are passed
to user space unmodified.
To address this, the series introduces two new ioctl commands that allow
userspace to query the device's raw cycle counter together with host
time:
- PTP_SYS_OFFSET_PRECISE_CYCLES
- PTP_SYS_OFFSET_EXTENDED_CYCLES
These commands work like their existing counterparts but return the
device timestamp in cycle units instead of real-time nanoseconds. This
allows user space to collect (cycle, time) pairs and build a mapping
between the device’s free-running clock and host time.
This can also be useful in the XDP fast path: if a driver inserts the
raw cycle value into metadata instead of a real-time timestamp, it can
avoid the overhead of converting cycles to time in the kernel. Then
userspace can resolve the cycle-to-time mapping using this ioctl when
needed.
The ioctl enables user space to correlate those with host time, without
requiring the PHC to be synchronized, so long as the drift remains
stable during collection.
Adds the new PTP ioctls and integrates support in ptp_ioctl():
- ptp: Add ioctl commands to expose raw cycle counter values
Support for exposing raw cycles in mlx5:
- net/mlx5: Extract MTCTR register read logic into helper function
- net/mlx5: Support getcyclesx and getcrosscycles
====================
Link: https://patch.msgid.link/1755008228-88881-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implement the getcyclesx64 and getcrosscycles callbacks in ptp_info to
expose the device’s raw free-running counter.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1755008228-88881-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Refactor the MTCTR register reading logic into a dedicated helper to
lay the groundwork for the next patch.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1755008228-88881-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce two new ioctl commands, PTP_SYS_OFFSET_PRECISE_CYCLES and
PTP_SYS_OFFSET_EXTENDED_CYCLES, to allow user space to access the
raw free-running cycle counter from PTP devices.
These ioctls are variants of the existing PRECISE and EXTENDED
offset queries, but instead of returning device time in realtime,
they return the raw cycle counter value.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/1755008228-88881-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The device power management API has the following asymmetry:
* dpm_suspend_start() does not clean up on failure
(it requires a call to dpm_resume_end())
* dpm_suspend_end() does clean up on failure
(it does not require a call to dpm_resume_start())
The asymmetry was introduced by commit d8f3de0d2412 ("Suspend-related
patches for 2.6.27") in June 2008: It removed a call to device_resume()
from device_suspend() (which was later renamed to dpm_suspend_start()).
When Xen began using the device power management API in May 2008 with
commit 0e91398f2a5d ("xen: implement save/restore"), the asymmetry did
not yet exist. But since it was introduced, a call to dpm_resume_end()
is missing in the error path of dpm_suspend_start(). Fix it.
Fixes: d8f3de0d2412 ("Suspend-related patches for 2.6.27")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v2.6.27
Reviewed-by: "Rafael J. Wysocki (Intel)" <rafael@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <22453676d1ddcebbe81641bb68ddf587fee7e21e.1756990799.git.lukas@wunner.de>
|
|
VIRQs come in 3 flavors, per-VPU, per-domain, and global, and the VIRQs
are tracked in per-cpu virq_to_irq arrays.
Per-domain and global VIRQs must be bound on CPU 0, and
bind_virq_to_irq() sets the per_cpu virq_to_irq at registration time
Later, the interrupt can migrate, and info->cpu is updated. When
calling __unbind_from_irq(), the per-cpu virq_to_irq is cleared for a
different cpu. If bind_virq_to_irq() is called again with CPU 0, the
stale irq is returned. There won't be any irq_info for the irq, so
things break.
Make xen_rebind_evtchn_to_cpu() update the per_cpu virq_to_irq mappings
to keep them update to date with the current cpu. This ensures the
correct virq_to_irq is cleared in __unbind_from_irq().
Fixes: e46cdb66c8fc ("xen: event channels")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250828003604.8949-4-jason.andryuk@amd.com>
|
|
Change find_virq() to return -EEXIST when a VIRQ is bound to a
different CPU than the one passed in. With that, remove the BUG_ON()
from bind_virq_to_irq() to propogate the error upwards.
Some VIRQs are per-cpu, but others are per-domain or global. Those must
be bound to CPU0 and can then migrate elsewhere. The lookup for
per-domain and global will probably fail when migrated off CPU 0,
especially when the current CPU is tracked. This now returns -EEXIST
instead of BUG_ON().
A second call to bind a per-domain or global VIRQ is not expected, but
make it non-fatal to avoid trying to look up the irq, since we don't
know which per_cpu(virq_to_irq) it will be in.
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250828003604.8949-3-jason.andryuk@amd.com>
|
|
rc is overwritten by the evtchn_status hypercall in each iteration, so
the return value will be whatever the last iteration is. This could
incorrectly return success even if the event channel was not found.
Change to an explicit -ENOENT for an un-found virq and return 0 on a
successful match.
Fixes: 62cc5fc7b2e0 ("xen/pv-on-hvm kexec: rebind virqs to existing eventchannel ports")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250828003604.8949-2-jason.andryuk@amd.com>
|
|
Link: https://lkml.kernel.org/r/20250905091557.3529937-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
state_show() reads kdamond->damon_ctx without holding damon_sysfs_lock.
This allows a use-after-free race:
CPU 0 CPU 1
----- -----
state_show() damon_sysfs_turn_damon_on()
ctx = kdamond->damon_ctx; mutex_lock(&damon_sysfs_lock);
damon_destroy_ctx(kdamond->damon_ctx);
kdamond->damon_ctx = NULL;
mutex_unlock(&damon_sysfs_lock);
damon_is_running(ctx); /* ctx is freed */
mutex_lock(&ctx->kdamond_lock); /* UAF */
(The race can also occur with damon_sysfs_kdamonds_rm_dirs() and
damon_sysfs_kdamond_release(), which free or replace the context under
damon_sysfs_lock.)
Fix by taking damon_sysfs_lock before dereferencing the context, mirroring
the locking used in pid_show().
The bug has existed since state_show() first accessed kdamond->damon_ctx.
Link: https://lkml.kernel.org/r/20250905101046.2288-1-disclosure@aisle.com
Fixes: a61ea561c871 ("mm/damon/sysfs: link DAMON for virtual address spaces monitoring")
Signed-off-by: Stanislav Fort <disclosure@aisle.com>
Reported-by: Stanislav Fort <disclosure@aisle.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 2ce3d282bd50 ("proc: fix missing pde_set_flags() for net proc
files") missed a key part in the definition of proc_dir_entry:
union {
const struct proc_ops *proc_ops;
const struct file_operations *proc_dir_ops;
};
So dereference of ->proc_ops assumes it is a proc_ops structure results in
type confusion and make NULL check for 'proc_ops' not work for proc dir.
Add !S_ISDIR(dp->mode) test before calling pde_set_flags() to fix it.
Link: https://lkml.kernel.org/r/20250904135715.3972782-1-wangzijie1@honor.com
Fixes: 2ce3d282bd50 ("proc: fix missing pde_set_flags() for net proc files")
Signed-off-by: wangzijie <wangzijie1@honor.com>
Reported-by: Brad Spengler <spender@grsecurity.net>
Closes: https://lore.kernel.org/all/20250903065758.3678537-1-wangzijie1@honor.com/
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Clang 22 recently added support for defining __SANITIZE__ macros similar
to GCC [1], which causes warnings (or errors with CONFIG_WERROR=y or W=e)
with the existing defines that the kernel creates to emulate this behavior
with existing clang versions.
In file included from <built-in>:3:
In file included from include/linux/compiler_types.h:171:
include/linux/compiler-clang.h:37:9: error: '__SANITIZE_THREAD__' macro redefined [-Werror,-Wmacro-redefined]
37 | #define __SANITIZE_THREAD__
| ^
<built-in>:352:9: note: previous definition is here
352 | #define __SANITIZE_THREAD__ 1
| ^
Refactor compiler-clang.h to only define the sanitizer macros when they
are undefined and adjust the rest of the code to use these macros for
checking if the sanitizers are enabled, clearing up the warnings and
allowing the kernel to easily drop these defines when the minimum
supported version of LLVM for building the kernel becomes 22.0.0 or newer.
Link: https://lkml.kernel.org/r/20250902-clang-update-sanitize-defines-v1-1-cf3702ca3d92@kernel.org
Link: https://github.com/llvm/llvm-project/commit/568c23bbd3303518c5056d7f03444dae4fdc8a9c [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kasan_populate_vmalloc() and its helpers ignore the caller's gfp_mask and
always allocate memory using the hardcoded GFP_KERNEL flag. This makes
them inconsistent with vmalloc(), which was recently extended to support
GFP_NOFS and GFP_NOIO allocations.
Page table allocations performed during shadow population also ignore the
external gfp_mask. To preserve the intended semantics of GFP_NOFS and
GFP_NOIO, wrap the apply_to_page_range() calls into the appropriate
memalloc scope.
xfs calls vmalloc with GFP_NOFS, so this bug could lead to deadlock.
There was a report here
https://lkml.kernel.org/r/686ea951.050a0220.385921.0016.GAE@google.com
This patch:
- Extends kasan_populate_vmalloc() and helpers to take gfp_mask;
- Passes gfp_mask down to alloc_pages_bulk() and __get_free_page();
- Enforces GFP_NOFS/NOIO semantics with memalloc_*_save()/restore()
around apply_to_page_range();
- Updates vmalloc.c and percpu allocator call sites accordingly.
Link: https://lkml.kernel.org/r/20250831121058.92971-1-urezki@gmail.com
Fixes: 451769ebb7e7 ("mm/vmalloc: alloc GFP_NO{FS,IO} for vmalloc")
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reported-by: syzbot+3470c9ffee63e4abafeb@syzkaller.appspotmail.com
Reviewed-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
syzbot detected a OCFS2 hang due to a recursive semaphore on a
FS_IOC_FIEMAP of the extent list on a specially crafted mmap file.
context_switch kernel/sched/core.c:5357 [inline]
__schedule+0x1798/0x4cc0 kernel/sched/core.c:6961
__schedule_loop kernel/sched/core.c:7043 [inline]
schedule+0x165/0x360 kernel/sched/core.c:7058
schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:7115
rwsem_down_write_slowpath+0x872/0xfe0 kernel/locking/rwsem.c:1185
__down_write_common kernel/locking/rwsem.c:1317 [inline]
__down_write kernel/locking/rwsem.c:1326 [inline]
down_write+0x1ab/0x1f0 kernel/locking/rwsem.c:1591
ocfs2_page_mkwrite+0x2ff/0xc40 fs/ocfs2/mmap.c:142
do_page_mkwrite+0x14d/0x310 mm/memory.c:3361
wp_page_shared mm/memory.c:3762 [inline]
do_wp_page+0x268d/0x5800 mm/memory.c:3981
handle_pte_fault mm/memory.c:6068 [inline]
__handle_mm_fault+0x1033/0x5440 mm/memory.c:6195
handle_mm_fault+0x40a/0x8e0 mm/memory.c:6364
do_user_addr_fault+0x764/0x1390 arch/x86/mm/fault.c:1387
handle_page_fault arch/x86/mm/fault.c:1476 [inline]
exc_page_fault+0x76/0xf0 arch/x86/mm/fault.c:1532
asm_exc_page_fault+0x26/0x30 arch/x86/include/asm/idtentry.h:623
RIP: 0010:copy_user_generic arch/x86/include/asm/uaccess_64.h:126 [inline]
RIP: 0010:raw_copy_to_user arch/x86/include/asm/uaccess_64.h:147 [inline]
RIP: 0010:_inline_copy_to_user include/linux/uaccess.h:197 [inline]
RIP: 0010:_copy_to_user+0x85/0xb0 lib/usercopy.c:26
Code: e8 00 bc f7 fc 4d 39 fc 72 3d 4d 39 ec 77 38 e8 91 b9 f7 fc 4c 89
f7 89 de e8 47 25 5b fd 0f 01 cb 4c 89 ff 48 89 d9 4c 89 f6 <f3> a4 0f
1f 00 48 89 cb 0f 01 ca 48 89 d8 5b 41 5c 41 5d 41 5e 41
RSP: 0018:ffffc9000403f950 EFLAGS: 00050256
RAX: ffffffff84c7f101 RBX: 0000000000000038 RCX: 0000000000000038
RDX: 0000000000000000 RSI: ffffc9000403f9e0 RDI: 0000200000000060
RBP: ffffc9000403fa90 R08: ffffc9000403fa17 R09: 1ffff92000807f42
R10: dffffc0000000000 R11: fffff52000807f43 R12: 0000200000000098
R13: 00007ffffffff000 R14: ffffc9000403f9e0 R15: 0000200000000060
copy_to_user include/linux/uaccess.h:225 [inline]
fiemap_fill_next_extent+0x1c0/0x390 fs/ioctl.c:145
ocfs2_fiemap+0x888/0xc90 fs/ocfs2/extent_map.c:806
ioctl_fiemap fs/ioctl.c:220 [inline]
do_vfs_ioctl+0x1173/0x1430 fs/ioctl.c:532
__do_sys_ioctl fs/ioctl.c:596 [inline]
__se_sys_ioctl+0x82/0x170 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5f13850fd9
RSP: 002b:00007ffe3b3518b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000200000000000 RCX: 00007f5f13850fd9
RDX: 0000200000000040 RSI: 00000000c020660b RDI: 0000000000000004
RBP: 6165627472616568 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe3b3518f0
R13: 00007ffe3b351b18 R14: 431bde82d7b634db R15: 00007f5f1389a03b
ocfs2_fiemap() takes a read lock of the ip_alloc_sem semaphore (since
v2.6.22-527-g7307de80510a) and calls fiemap_fill_next_extent() to read the
extent list of this running mmap executable. The user supplied buffer to
hold the fiemap information page faults calling ocfs2_page_mkwrite() which
will take a write lock (since v2.6.27-38-g00dc417fa3e7) of the same
semaphore. This recursive semaphore will hold filesystem locks and causes
a hang of the fileystem.
The ip_alloc_sem protects the inode extent list and size. Release the
read semphore before calling fiemap_fill_next_extent() in ocfs2_fiemap()
and ocfs2_fiemap_inline(). This does an unnecessary semaphore lock/unlock
on the last extent but simplifies the error path.
Link: https://lkml.kernel.org/r/61d1a62b-2631-4f12-81e2-cd689914360b@oracle.com
Fixes: 00dc417fa3e7 ("ocfs2: fiemap support")
Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com>
Reported-by: syzbot+541dcc6ee768f77103e7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=541dcc6ee768f77103e7
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When I did memory failure tests, below panic occurs:
page dumped because: VM_BUG_ON_PAGE(PagePoisoned(page))
kernel BUG at include/linux/page-flags.h:616!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 720 Comm: bash Not tainted 6.10.0-rc1-00195-g148743902568 #40
RIP: 0010:unpoison_memory+0x2f3/0x590
RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246
RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0
RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb
R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000
R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe
FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0
Call Trace:
<TASK>
unpoison_memory+0x2f3/0x590
simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110
debugfs_attr_write+0x42/0x60
full_proxy_write+0x5b/0x80
vfs_write+0xd5/0x540
ksys_write+0x64/0xe0
do_syscall_64+0xb9/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f08f0314887
RSP: 002b:00007ffece710078 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f08f0314887
RDX: 0000000000000009 RSI: 0000564787a30410 RDI: 0000000000000001
RBP: 0000564787a30410 R08: 000000000000fefe R09: 000000007fffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009
R13: 00007f08f041b780 R14: 00007f08f0417600 R15: 00007f08f0416a00
</TASK>
Modules linked in: hwpoison_inject
---[ end trace 0000000000000000 ]---
RIP: 0010:unpoison_memory+0x2f3/0x590
RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246
RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0
RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb
R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000
R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe
FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x31c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]---
The root cause is that unpoison_memory() tries to check the PG_HWPoison
flags of an uninitialized page. So VM_BUG_ON_PAGE(PagePoisoned(page)) is
triggered. This can be reproduced by below steps:
1.Offline memory block:
echo offline > /sys/devices/system/memory/memory12/state
2.Get offlined memory pfn:
page-types -b n -rlN
3.Write pfn to unpoison-pfn
echo <pfn> > /sys/kernel/debug/hwpoison/unpoison-pfn
This scenario can be identified by pfn_to_online_page() returning NULL.
And ZONE_DEVICE pages are never expected, so we can simply fail if
pfn_to_online_page() == NULL to fix the bug.
Link: https://lkml.kernel.org/r/20250828024618.1744895-1-linmiaohe@huawei.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 3215eaceca87 ("mm/mremap: refactor initial parameter sanity
checks") moved the sanity check for vrm->new_addr from mremap_to() to
check_mremap_params().
However, this caused a regression as vrm->new_addr is now checked even
when MREMAP_FIXED and MREMAP_DONTUNMAP flags are not specified. In this
case, vrm->new_addr can be garbage and create unexpected failures.
Fix this by moving the new_addr check after the vrm_implies_new_addr()
guard. This ensures that the new_addr is only checked when the user has
specified one explicitly.
Link: https://lkml.kernel.org/r/20250828142657.770502-1-cmllamas@google.com
Fixes: 3215eaceca87 ("mm/mremap: refactor initial parameter sanity checks")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The 'allocation failed, ...' warning messages can cause unlimited log
spam, contrary to the implementation's intent.
The warn_limit variable is accessed without synchronization. If more than
<warn_limit> threads enter the warning path at the same time, the variable
will get decremented past 0. Once it becomes negative, the non-zero check
will always return true leading to unlimited log spam.
Use atomic operation to access warn_limit and change condition to test for
non-negative (>= 0) - atomic_dec_if_positive will return -1 once
warn_limit becomes 0. Continue to print disable message alongside the
last warning.
While the change cited in Fixes is only adjacent, the warning limit
implementation was correct before it. Only non-atomic allocations were
considered for warnings, and those happened to hold pcpu_alloc_mutex while
accessing warn_limit.
[vdumitrescu@nvidia.com: prevent warn_limit from going negative, per Christoph Lameter]
Link: https://lkml.kernel.org/r/ee87cc59-2717-4dbb-8052-1d2692c5aaaa@nvidia.com
Link: https://lkml.kernel.org/r/ab22061a-a62f-4429-945b-744e5cc4ba35@nvidia.com
Fixes: f7d77dfc91f7 ("mm/percpu.c: print error message too if atomic alloc failed")
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update ti,tas2781.yaml for adding tas2118, tas2x20, tas257x and tas582x.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add tas2020, tas2118, tas2120, tas2320, tas2570, tas2572, tas5825
tas5827 support in tas2781 driver.
Tas2118, tas2x20, tas257x have no on-chip DSP, tas582x have on-chip
DSP but have no calibration required stereo smart amplifier.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add a proper function for display && HAS_DISPLAY(display) to hide
indirect struct intel_display access via the macro from a number of
places outside of display. This makes struct intel_display * an opaque
pointer in these places. All HAS_DISPLAY() usage is now constrained
within display.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250903090408.3492875-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Below two functions should never fail, clean up error handling in their
callers:
1) f2fs_grab_read_bio() in f2fs_submit_page_read()
2) bio_add_folio() in f2fs_submit_page_read()
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In error path of __get_node_folio(), if the folio is not uptodate, let's
avoid unnecessary folio_clear_uptodate() for cleanup.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
FUA writes can be merged to the existing write IOs.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
