| Age | Commit message (Collapse) | Author |
|---|
|
Adjust frequency percentage computations in update_cpu_qos_request() to
avoid going above the exact numerical percentage in the FREQ_QOS_MAX
case.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Link: https://patch.msgid.link/3395556.44csPzL39Z@rafael.j.wysocki
[ rjw: Rename "cpu" to "cpudata" and "cpunum" to "cpu" ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Move the code from the for_each_possible_cpu() loop in update_qos_request()
to a separate function and use __free() for cpufreq policy reference
counting in it to avoid having to call cpufreq_cpu_put() repeatedly (or
using goto).
While at it, rename update_qos_request() to update_qos_requests()
because it updates multiple requests in one go.
No intentional functional impact.
Link: https://lore.kernel.org/linux-pm/CAJZ5v0gN1T5woSF0tO=TbAh+2-sWzxFjWyDbB7wG2TFCOU01iQ@mail.gmail.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Link: https://patch.msgid.link/3026597.e9J7NaK4W3@rafael.j.wysocki
[ rjw: Rename "cpu" to "cpudata" and "cpunum" to "cpu" in new code ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The cpufreq_cpu_put() call in update_qos_request() takes place too early
because the latter subsequently calls freq_qos_update_request() that
indirectly accesses the policy object in question through the QoS request
object passed to it.
Fortunately, update_qos_request() is called under intel_pstate_driver_lock,
so this issue does not matter for changing the intel_pstate operation
mode, but it theoretically can cause a crash to occur on CPU device hot
removal (which currently can only happen in virt, but it is formally
supported nevertheless).
Address this issue by modifying update_qos_request() to drop the
reference to the policy later.
Fixes: da5c504c7aae ("cpufreq: intel_pstate: Implement QoS supported freq constraints")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Link: https://patch.msgid.link/2255671.irdbgypaU6@rafael.j.wysocki
|
|
The function move_dirty_folio_in_page_array() was created by commit
ce80b76dd327 ("ceph: introduce ceph_process_folio_batch() method") by
moving code from ceph_writepages_start() to this function.
This new function is supposed to return an error code which is checked
by the caller (now ceph_process_folio_batch()), and on error, the
caller invokes redirty_page_for_writepage() and then breaks from the
loop.
However, the refactoring commit has gone wrong, and it by accident, it
always returns 0 (= success) because it first NULLs the pointer and
then returns PTR_ERR(NULL) which is always 0. This means errors are
silently ignored, leaving NULL entries in the page array, which may
later crash the kernel.
The simple solution is to call PTR_ERR() before clearing the pointer.
Cc: stable@vger.kernel.org
Fixes: ce80b76dd327 ("ceph: introduce ceph_process_folio_batch() method")
Link: https://lore.kernel.org/ceph-devel/aK4v548CId5GIKG1@swift.blarg.de/
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The function ceph_process_folio_batch() sets folio_batch entries to
NULL, which is an illegal state. Before folio_batch_release() crashes
due to this API violation, the function ceph_shift_unused_folios_left()
is supposed to remove those NULLs from the array.
However, since commit ce80b76dd327 ("ceph: introduce
ceph_process_folio_batch() method"), this shifting doesn't happen
anymore because the "for" loop got moved to ceph_process_folio_batch(),
and now the `i` variable that remains in ceph_writepages_start()
doesn't get incremented anymore, making the shifting effectively
unreachable much of the time.
Later, commit 1551ec61dc55 ("ceph: introduce ceph_submit_write()
method") added more preconditions for doing the shift, replacing the
`i` check (with something that is still just as broken):
- if ceph_process_folio_batch() fails, shifting never happens
- if ceph_move_dirty_page_in_page_array() was never called (because
ceph_process_folio_batch() has returned early for some of various
reasons), shifting never happens
- if `processed_in_fbatch` is zero (because ceph_process_folio_batch()
has returned early for some of the reasons mentioned above or
because ceph_move_dirty_page_in_page_array() has failed), shifting
never happens
Since those two commits, any problem in ceph_process_folio_batch()
could crash the kernel, e.g. this way:
BUG: kernel NULL pointer dereference, address: 0000000000000034
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: Oops: 0002 [#1] SMP NOPTI
CPU: 172 UID: 0 PID: 2342707 Comm: kworker/u778:8 Not tainted 6.15.10-cm4all1-es #714 NONE
Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.10 12/08/2023
Workqueue: writeback wb_workfn (flush-ceph-1)
RIP: 0010:folios_put_refs+0x85/0x140
Code: 83 c5 01 39 e8 7e 76 48 63 c5 49 8b 5c c4 08 b8 01 00 00 00 4d 85 ed 74 05 41 8b 44 ad 00 48 8b 15 b0 >
RSP: 0018:ffffb880af8db778 EFLAGS: 00010207
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000003
RDX: ffffe377cc3b0000 RSI: 0000000000000000 RDI: ffffb880af8db8c0
RBP: 0000000000000000 R08: 000000000000007d R09: 000000000102b86f
R10: 0000000000000001 R11: 00000000000000ac R12: ffffb880af8db8c0
R13: 0000000000000000 R14: 0000000000000000 R15: ffff9bd262c97000
FS: 0000000000000000(0000) GS:ffff9c8efc303000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000034 CR3: 0000000160958004 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
ceph_writepages_start+0xeb9/0x1410
The crash can be reproduced easily by changing the
ceph_check_page_before_write() return value to `-E2BIG`.
(Interestingly, the crash happens only if `huge_zero_folio` has
already been allocated; without `huge_zero_folio`,
is_huge_zero_folio(NULL) returns true and folios_put_refs() skips NULL
entries instead of dereferencing them. That makes reproducing the bug
somewhat unreliable. See
https://lore.kernel.org/20250826231626.218675-1-max.kellermann@ionos.com
for a discussion of this detail.)
My suggestion is to move the ceph_shift_unused_folios_left() to right
after ceph_process_folio_batch() to ensure it always gets called to
fix up the illegal folio_batch state.
Cc: stable@vger.kernel.org
Fixes: ce80b76dd327 ("ceph: introduce ceph_process_folio_batch() method")
Link: https://lore.kernel.org/ceph-devel/aK4v548CId5GIKG1@swift.blarg.de/
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When the parent directory's i_rwsem is not locked, req->r_parent may become
stale due to concurrent operations (e.g. rename) between dentry lookup and
message creation. Validate that r_parent matches the encoded parent inode
and update to the correct inode if a mismatch is detected.
[ idryomov: folded a follow-up fix from Alex to drop extra reference
from ceph_get_reply_dir() in ceph_fill_trace():
ceph_get_reply_dir() may return a different, referenced inode when
r_parent is stale and the parent directory lock is not held.
ceph_fill_trace() used that inode but failed to drop the reference
when it differed from req->r_parent, leaking an inode reference.
Keep the directory inode in a local variable and iput() it at
function end if it does not match req->r_parent. ]
Cc: stable@vger.kernel.org
Signed-off-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Add validation to ensure the cached parent directory inode matches the
directory info in MDS replies. This prevents client-side race conditions
where concurrent operations (e.g. rename) cause r_parent to become stale
between request initiation and reply processing, which could lead to
applying state changes to incorrect directory inodes.
[ idryomov: folded a kerneldoc fixup and a follow-up fix from Alex to
move CEPH_CAP_PIN reference when r_parent is updated:
When the parent directory lock is not held, req->r_parent can become
stale and is updated to point to the correct inode. However, the
associated CEPH_CAP_PIN reference was not being adjusted. The
CEPH_CAP_PIN is a reference on an inode that is tracked for
accounting purposes. Moving this pin is important to keep the
accounting balanced. When the pin was not moved from the old parent
to the new one, it created two problems: The reference on the old,
stale parent was never released, causing a reference leak.
A reference for the new parent was never acquired, creating the risk
of a reference underflow later in ceph_mdsc_release_request(). This
patch corrects the logic by releasing the pin from the old parent and
acquiring it for the new parent when r_parent is switched. This
ensures reference accounting stays balanced. ]
Cc: stable@vger.kernel.org
Signed-off-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The 130/1030 devices are really derivatives of 6030,
with some small differences not pertaining to the MAC,
so they must use the 6030 MAC config.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220472
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220517
Fixes: 35ac275ebe0c ("wifi: iwlwifi: cfg: finish config split")
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909121728.8e4911f12528.I3aa7194012a4b584fbd5ddaa3a77e483280f1de4@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Running resctrl_tests on an SNC-2 system with lockdep debugging enabled
triggers several warnings with following trace:
WARNING: CPU: 0 PID: 1914 at kernel/cpu.c:528 lockdep_assert_cpus_held
...
Call Trace:
__mon_event_count
? __lock_acquire
? __pfx___mon_event_count
mon_event_count
? __pfx_smp_mon_event_count
smp_mon_event_count
smp_call_on_cpu_callback
get_cpu_cacheinfo_level() called from __mon_event_count() requires CPU hotplug
lock to be held. The hotplug lock is indeed held during this time, as
confirmed by the lockdep_assert_cpus_held() within mon_event_read() that calls
mon_event_count() via IPI, but the lockdep tracking is not able to follow the
IPI.
Fresh CPU cache information via get_cpu_cacheinfo_level() from
__mon_event_count() was added to support the fix for the issue where resctrl
inappropriately maintained links to L3 cache information that will be stale in
the case when the associated CPU goes offline.
Keep the cacheinfo ID in struct rdt_mon_domain to ensure that resctrl does not
maintain stale cache information while CPUs can go offline. Return to using
a pointer to the L3 cache information (struct cacheinfo) in struct rmid_read,
rmid_read::ci. Initialize rmid_read::ci before the IPI where it is used. CPU
hotplug lock is held across rmid_read::ci initialization and use to ensure
that it points to accurate cache information.
Fixes: 594902c986e2 ("x86,fs/resctrl: Remove inappropriate references to cacheinfo in the resctrl subsystem")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
Align the ordering to the one used for hrtimer_bases.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250821-hrtimer-cleanup-get_time-v2-9-3ae822e5bfbd@linutronix.de
|
|
The get_time() callbacks always need to match the bases clockid.
Instead of maintaining that association twice in hrtimer_bases,
use a helper.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250821-hrtimer-cleanup-get_time-v2-8-3ae822e5bfbd@linutronix.de
|
|
Various other helpers contain open-coded implementations of
hrtimer_cb_get_time(). This prevents refactoring the implementation.
Reuse the existing helper.
For this to work, move hrtimer_cb_get_time() a bit up in the file and also
make its argument 'const'.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250821-hrtimer-cleanup-get_time-v2-7-3ae822e5bfbd@linutronix.de
|
|
The field timer->base->get_time is a private implementation detail and
should not be accessed outside of the hrtimer core.
Switch to an equivalent higher-level helper.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sean Young <sean@mess.org>
Link: https://lore.kernel.org/all/20250821-hrtimer-cleanup-get_time-v2-6-3ae822e5bfbd@linutronix.de
|
|
The field timer->base->get_time is a private implementation detail and
should not be accessed outside of the hrtimer core.
Switch to the equivalent helper.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/all/20250821-hrtimer-cleanup-get_time-v2-5-3ae822e5bfbd@linutronix.de
|
|
The field timer->base->get_time is a private implementation detail and
should not be accessed outside of the hrtimer core.
Switch to the equivalent helper.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250821-hrtimer-cleanup-get_time-v2-4-3ae822e5bfbd@linutronix.de
|
|
The field timer->base->get_time is a private implementation detail and
should not be accessed outside of the hrtimer core.
Switch to the equivalent helper.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250821-hrtimer-cleanup-get_time-v2-3-3ae822e5bfbd@linutronix.de
|
|
The field timer->base->get_time is a private implementation detail and
should not be accessed outside of the hrtimer core.
Switch to the equivalent helper.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250821-hrtimer-cleanup-get_time-v2-2-3ae822e5bfbd@linutronix.de
|
|
The field timer->base->get_time is a private implementation detail and
should not be accessed outside of the hrtimer core.
Switch to the equivalent helpers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250821-hrtimer-cleanup-get_time-v2-1-3ae822e5bfbd@linutronix.de
|
|
The i.MX SCMI MISC protocol can report board information from the
System Manager (SM), including a board name and board-specific
attributes. Query this during protocol initialization.
If the firmware does not implement BOARD_INFO, handle -EOPNOTSUPP
gracefully and continue.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250904-sm-misc-api-v1-v4-4-0bf10eaabdf1@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
AST2700 continues the multi-instance SCU interrupt controller model
introduced in the AST2600, with four independent interrupt domains (scu-ic0
to 3).
Unlike earlier generations which combine interrupt enable and status bits
into a single register, AST2700 separates these into distinct IER and ISR
registers. Support for this layout is implemented by using register offsets
and separate chained IRQ handlers.
The variant table is extended to cover AST2700 IC instances, enabling
shared initialization logic while preserving support for previous SoCs.
[ tglx: Simplified the logic and cleaned up coding style ]
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250908011812.1033858-5-ryan_chen@aspeedtech.com
|
|
Add compatible strings for the four SCU interrupt controller instances
on the AST2700 SoC (scu-ic0 to 3), following the multi-instance model used
on AST2600.
Also define interrupt indices in the binding header.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/all/20250908011812.1033858-4-ryan_chen@aspeedtech.com
|
|
Add SCU interrupt controller compatible strings for the AST2700 SoC:
scu-ic0 to 3. This extends the MFD binding to support AST2700-based
platforms.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/all/20250908011812.1033858-3-ryan_chen@aspeedtech.com
|
|
The SCU IC driver handles each AST2600 instance with separate
initialization functions and hardcoded register definitions, which is
inflexible and creates duplicated code.
Consolidate the implementation by introducing a variant-based structure,
selected via compatible string, and use a unified init path and MMIO access
via of_iomap(). This simplifies the code and prepares for upcoming SoCs
like AST2700, which require split register handling.
[ tglx: Cleaned up coding style and massaged change log ]
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250908011812.1033858-2-ryan_chen@aspeedtech.com
|
|
When building with CONFIG_CFI_CLANG=y after the recent series to
separate the x86 startup code, there are objtool warnings along the
lines of:
vmlinux.o: warning: objtool: __pi___cfi_startup_64_load_idt() falls through to next function __pi_startup_64_load_idt()
vmlinux.o: warning: objtool: __pi___cfi_startup_64_setup_gdt_idt() falls through to next function __pi_startup_64_setup_gdt_idt()
vmlinux.o: warning: objtool: __pi___cfi___startup_64() falls through to next function __pi___startup_64()
As the comment in validate_branch() states, this is expected, so ignore
these symbols in the same way that __cfi_ and __pfx_ symbols are already
ignored for the rest of the kernel.
Fixes: 7b38dec3c5af ("x86/boot: Create a confined code area for startup code")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Code in gicv5_its_irq_domain_alloc() has two issues:
- it checks the wrong return value/variable when calling gicv5_alloc_lpi()
- The cleanup code does not take previous loop iterations into account
Fix both issues at once by adding the right gicv5_alloc_lpi() variable
check and by reworking the function cleanup code to take into account
current and previous iterations.
[ lpieralisi: Reworded commit message ]
Fixes: 57d72196dfc8 ("irqchip/gic-v5: Add GICv5 ITS support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/all/20250908082745.113718-4-lpieralisi@kernel.org
|
|
The "i" variable in gicv5_its_create_itt_two_level() needs to be signed
otherwise it can cause a forever loop in the function's cleanup path.
[ lpieralisi: Reworded commit message ]
Fixes: 57d72196dfc8 ("irqchip/gic-v5: Add GICv5 ITS support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/all/20250908082745.113718-3-lpieralisi@kernel.org
|
|
Delete a stray tab that is indenting the code erroneously.
[ lpieralisi: Reworded commit message]
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/all/20250908082745.113718-2-lpieralisi@kernel.org
|
|
Add selftest for the IPv6 fragmentation regression which affected
several stable kernels.
Commit a18dfa9925b9 ("ipv6: save dontfrag in cork") was backported to
stable without some prerequisite commits. This caused a regression when
sending IPv6 UDP packets by preventing fragmentation and instead
returning -1 (EMSGSIZE).
Add selftest to check for this issue by attempting to send a packet
larger than the interface MTU. The packet will be fragmented on a
working kernel, with sendmsg(2) correctly returning the expected number
of bytes sent. When the regression is present, sendmsg returns -1 and
sets errno to EMSGSIZE.
Link: https://lore.kernel.org/stable/aElivdUXqd1OqgMY@karahi.gladserv.com
Signed-off-by: Brett A C Sheffield <bacs@librecast.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250903154925.13481-1-bacs@librecast.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250909065913.4011133-1-nichen@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add test to check the broadcast ethernet destination field is set
correctly.
This test sends a broadcast ping, captures it using tcpdump and
ensures that all bits of the 6 octet ethernet destination address
are correctly set by examining the output capture file.
Co-developed-by: Brett A C Sheffield <bacs@librecast.net>
Signed-off-by: Brett A C Sheffield <bacs@librecast.net>
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Link: https://patch.msgid.link/20250902150240.4272-1-oscmaes92@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The VF CCS handling is per-device so its debugfs file should not
be exposed on per-GT basis. Move it up to the device level.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250908123025.747-8-michal.wajdeczko@intel.com
|
|
We only need single set of VF CCS contexts, they are not per-tile
as initial implementation might suggest. Move all VF CCS data from
xe_tile.sriov.vf to xe_device.sriov.vf. Also rename some structs to
align with the usage and fix their kernel-doc.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250908123025.747-7-michal.wajdeczko@intel.com
|
|
This will allow as to drop ugly IS_VF_CCS_BB_VALID macro.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250908123025.747-6-michal.wajdeczko@intel.com
|
|
All xe_sriov_vf_ccs() functions but init() expect to be called
when initialization was successful and CCS handling is ready.
Update IS_VF_CCS_READY macro and use it as single entry guard.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250908123025.747-5-michal.wajdeczko@intel.com
|
|
We only use this macro once and we can open-code it to explicitly
show relevant conditions and avoid duplications.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250908123025.747-4-michal.wajdeczko@intel.com
|
|
In H2G action context type is specified in flags dword in bits 2:1.
Use generic FIELD_PREP macro instead of misleading BIT logic.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250908123025.747-3-michal.wajdeczko@intel.com
|
|
This function is dedicated for use by the VFs, we shouldn't use
name that might suggests it's general purpose. While there, update
asserts to better reflect intended usage.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250908123025.747-2-michal.wajdeczko@intel.com
|
|
Unlike VLAN devices, HSR changes the lower device’s rx_handler, which
prevents the lower device from being attached to another master.
Switch to using netdev_master_upper_dev_link() when setting up the lower
device.
This could improves user experience, since ip link will now display the
HSR device as the master for its ports.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902065558.360927-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This notification is supported in FW since API 100.
Since we don't support any API older than that, we don't need to check
whether the notification is supported.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.b43f7da0d63b.I7386aeef5fae70dc4b0901cfb650eeaecb4c1575@changeid
|
|
The last FW API that supports version 5 is 99. Since this API is no
longer supported on any device that loads iwlmld, we can remove support
of it.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.e15a7fa15c70.Ibb8636e826136c8c31931e77f5ffa853372b4301@changeid
|
|
The last FW API that supports version 1 is 99. Since this API is no
longer supported on any device that loads iwlmld, we can remove support
of it.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.4d6689d5c4b2.I5d2bf7302eea8ac7a805f58e4e60e527d6f5b346@changeid
|
|
The last FW API that supports version 5 is 97. Since this API is no
longer supported on any device that loads iwlmld, we can remove support
of it.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.e53bd8553360.I6978c216b52b818b879d076a85c5f9edafcf2e99@changeid
|
|
The last FW API that supported ver 2 is API 99 (core 96)
Since we no longer support it in any device that loads iwlmld, we can
remove support of it.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.a56bf370d31a.Ie1e93654ce9ee52e6ae3fda9bc898d611456ec41@changeid
|
|
It was planed that iwlmld will be loaded also for HR and GF, which has
versions < 6. But eventually it was decided to keep use iwlmvm for those
devices, so iwlmld doesn't need to support those versions.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.42501c7b0baa.I207ff53d259cc90781a0082320e2646b35925e5f@changeid
|
|
Add per key status indication in the WOWLAN status notification.
This update is required for fips. Each key entry now
includes a status field.
Keys are now processed as follows:
0: no key, ignore entry
1: old, use only metadata
2: new, use key material and metadata
While at it, fix tid_offloaded_tx error message to print the
actual variable being validated in iwl_mld_handle_wowlan_info_notif.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.0a2e7a62504c.Id195c9c83f9f767d1e3e458468af2d933774daa1@changeid
|
|
Add ASUS to the list of OEMs that are allowed to use
the PPAG and TAS feature.
Signed-off-by: Nidhish A N <nidhish.a.n@intel.com>
Reviewed-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.499af6568e89.Iafb2cb1c83ff82712c0e9d5529f76bc226ed12dd@changeid
|
|
nvm flags is part of nvm parse. Add test for VLP AP/CLIENT
enable/disable scenarios.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.a7a4713fbfee.Ia0caf8865e63b40826c9b66084bd20438554f15c@changeid
|
|
Add a new flag which, when set, will indicate that the UHR parameters in
the link command have changed.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.b399aebbc384.I8a5a2728e71d92db67d4a4e0f4c358ca7b16ff51@changeid
|
|
Currently it is under iwl_trans, which is the bus agnostic part of the
transport. But really it is relevant for pcie only, so move it to the
iwl_trans_pcie and export it via an API to the opmode.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.9f9dc80ab06c.I3eeca8b17abeba6ed30f0d681518c81ede0acf30@changeid
|
|
Currently it is under iwl_trans, which is the bus agnostic part of the
transport. But really it is relevant for pcie only, so move it to the
iwl_trans_pcie and export it via an API to the opmode.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.997193cabd04.Ic6648f040430c94150d0fa11601f50a6a630b862@changeid
|
