| Age | Commit message (Collapse) | Author |
|---|
|
Replace hverkuil-cisco@xs4all.nl by hverkuil@kernel.org.
Signed-off-by: Hans Verkuil <hverkuil@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Replace hverkuil-cisco@xs4all.nl by hverkuil@kernel.org.
Signed-off-by: Hans Verkuil <hverkuil@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use hverkuil@kernel.org as the main address for kernel work.
Signed-off-by: Hans Verkuil <hverkuil@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
I started seeing this in recent Fedora 42 kernels:
# uname -a
Linux number 6.16.3-200.fc42.x86_64 #1 SMP PREEMPT_DYNAMIC Sat Aug 23 17:02:17 UTC 2025 x86_64 GNU/Linux
#
# perf test vmlinux
1: vmlinux symtab matches kallsyms : FAILED!
#
Rust is enabled and these were the symbols causing the above failure,
i.e. found in vmlinux but not in /proc/kallsyms:
$ grep -w N /proc/kallsyms
0000000000000000 N __pfx__RNCINvNtNtNtCsbDUBuN8AbD4_4core4iter8adapters3map12map_try_foldjNtCs6vVzKs5jPr6_12drm_panic_qr7VersionuINtNtNtBa_3ops12control_flow11ControlFlowB10_ENcB10_0NCINvNvNtNtNtB8_6traits8iterator8Iterator4find5checkB10_NCNvMB12_B10_13from_segments0E0E0B12_
0000000000000000 N _RNCINvNtNtNtCsbDUBuN8AbD4_4core4iter8adapters3map12map_try_foldjNtCs6vVzKs5jPr6_12drm_panic_qr7VersionuINtNtNtBa_3ops12control_flow11ControlFlowB10_ENcB10_0NCINvNvNtNtNtB8_6traits8iterator8Iterator4find5checkB10_NCNvMB12_B10_13from_segments0E0E0B12_
$
So accept those 'N' symbols as well.
About them, from 'man nm':
"N" The symbol is a debugging symbol.
"n" The symbol is in a non-data, non-code, non-debug read-only section.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add missing documentation for the tags_srcu member that was introduced
to defer freeing of tags page_list to prevent use-after-free when
iterating tags.
Fixes htmldocs warning:
WARNING: include/linux/blk-mq.h:536 struct member 'tags_srcu' not described in 'blk_mq_tag_set'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Bios are embedded into other structures, and at least spare is unhappy
about embedding structures with variable sized arrays. There's no
real need to the array anyway, we can replace it with a helper pointing
to the memory just behind the bio, and with the previous cleanups there
is very few site doing anything special with it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just a simpler wrapper around bio_init for callers that want to
initialize a bio with inline bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use devm_mutex_init() instead of hand-writing it.
This saves some LoC, improves readability and saves some space in the
generated .o file.
Before:
======
text data bss dec hex filename
36884 10296 64 47244 b88c drivers/gpu/drm/xe/xe_hwmon.o
After:
=====
text data bss dec hex filename
36651 10224 64 46939 b75b drivers/gpu/drm/xe/xe_hwmon.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/989e96369e9e1f8a44b816962917ec76877c912d.1757252520.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Recently, syzbot started to abuse NBD with all kinds of sockets.
Commit cf1b2326b734 ("nbd: verify socket is supported during setup")
made sure the socket supported a shutdown() method.
Explicitely accept TCP and UNIX stream sockets.
Fixes: cf1b2326b734 ("nbd: verify socket is supported during setup")
Reported-by: syzbot+e1cd6bd8493060bd701d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/CANn89iJ+76eE3A_8S_zTpSyW5hvPRn6V57458hCZGY5hbH_bFA@mail.gmail.com/T/#m081036e8747cd7e2626c1da5d78c8b9d1e55b154
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Yu Kuai <yukuai1@huaweicloud.com>
Cc: linux-block@vger.kernel.org
Cc: nbd@other.debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for configuring the DAI format on MI2S interfaces,
this enhancement allows setting the appropriate bit clock and
frame clock polarity, ensuring correct audio data transmission
over MI2S.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Rule: add
Link: https://lore.kernel.org/stable/20250908053631.70978-4-mohammad.rafi.shaik%40oss.qualcomm.com
Message-ID: <20250908053631.70978-4-mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The q6i2s_set_fmt() function was defined but never linked into the
I2S DAI operations, resulting DAI format settings is being ignored
during stream setup. This change fixes the issue by properly linking
the .set_fmt handler within the DAI ops.
Fixes: 30ad723b93ade ("ASoC: qdsp6: audioreach: add q6apm lpass dai support")
Cc: stable@vger.kernel.org
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Message-ID: <20250908053631.70978-3-mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix missing lpaif_type configuration for the I2S interface.
The proper lpaif interface type required to allow DSP to vote
appropriate clock setting for I2S interface.
Fixes: 25ab80db6b133 ("ASoC: qdsp6: audioreach: add module configuration command helpers")
Cc: stable@vger.kernel.org
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Message-ID: <20250908053631.70978-2-mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert few open coded bit shifts to BIT() macro for better readability.
No functional changes intended.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Message-ID: <20250905185958.3575037-5-s-k6@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The 'max_cs' stores the largest chip select number. It should only
be updated when the current 'cs' is greater than existing 'max_cs'. So,
fix the condition accordingly.
Also, return failure if there are no flash device declared.
Fixes: 0f3841a5e115 ("spi: cadence-qspi: report correct number of chip-select")
CC: stable@vger.kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Message-ID: <20250905185958.3575037-4-s-k6@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cqspi_read_setup() and cqspi_write_setup() program the address width as
the last step in the setup. This is likely to be immediately followed by
a DAC region read/write. On TI K3 SoCs the DAC region is on a different
endpoint from the register region. This means that the order of the two
operations is not guaranteed, and they might be reordered at the
interconnect level. It is possible that the DAC read/write goes through
before the address width update goes through. In this situation if the
previous command used a different address width the OSPI command is sent
with the wrong number of address bytes, resulting in an invalid command
and undefined behavior.
Read back the size register to make sure the write gets flushed before
accessing the DAC region.
Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
CC: stable@vger.kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Message-ID: <20250905185958.3575037-3-s-k6@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cqspi_indirect_read_execute() and cqspi_indirect_write_execute() first
set the enable bit on APB region and then start reading/writing to the
AHB region. On TI K3 SoCs these regions lie on different endpoints. This
means that the order of the two operations is not guaranteed, and they
might be reordered at the interconnect level.
It is possible for the AHB write to be executed before the APB write to
enable the indirect controller, causing the transaction to be invalid
and the write erroring out. Read back the APB region write before
accessing the AHB region to make sure the write got flushed and the race
condition is eliminated.
Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
CC: stable@vger.kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Message-ID: <20250905185958.3575037-2-s-k6@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No need to keep them non-const. Also fix declaration of .name
member, as it points to the const string. This translates to:
add/remove: 1/0 grow/shrink: 0/2 up/down: 80/-248 (-168)
Function old new delta
residencies - 80 +80
dgfx_pcie_link_residencies_show 365 263 -102
dgfx_pkg_residencies_show 454 308 -146
Total: Before=2821548, After=2821380, chg -0.01%
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Soham Purkait <soham.purkait@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Karthik Poosa <karthik.poosa@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250905180225.8434-1-michal.wajdeczko@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Replace kmalloc() followed by copy_from_user() with memdup_user_nul() to
improve and simplify hmcdrv_dev_write(). Remove the manual
NUL-termination.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Replace kmalloc() followed by copy_from_user() with memdup_user_nul() to
improve and simplify debug_get_user_string(). Remove the manual
NUL-termination.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Enable bus mastering for I2C controller to support device initiated
in-band transactions.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250908055320.2549722-1-raag.jadav@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Assign pinctrl to switch phys and leds.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250709111147.11843-14-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add SFP cages to Bananapi-R4 board. The 2.5g phy variant only contains the
wan-SFP, so add this to common dtsi and the lan-sfp only to the dual-SFP
variant.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250709111147.11843-13-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add aliases for gmacs to allow bootloader setting mac-adresses.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250709111147.11843-12-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add mt7988 builtin mt753x switch nodes.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250709111147.11843-11-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add basic ethernet related nodes.
Mac1+2 needs pcs (sgmii+usxgmii) to work correctly which will be linked
later when driver is merged.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20250709111147.11843-10-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add interrupts for RSS/LRO and names to access them via name instead of
index.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20250709111147.11843-9-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Currently sram is allocated in driver via offset from reg of ethernet
node. Change it to use a dedicated sram node like mt7988.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20250709111147.11843-8-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
The temperature sensor in the MT7981 is same as in the MT7986.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250907111742.23195-2-olek2@wp.pl
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add support for PMIC and GPIO keys on the Radxa NIO 12L board:
Declare a gpio-keys node for the Volume Up button using GPIO106.
Add the corresponding pin configuration in the pinctrl node.
Add a mediatek,mt6359-keys subnode under the PMIC to handle the
power and home buttons exposed by the MT6359.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Link: https://lore.kernel.org/r/20250905-radxa-nio-12-l-gpio-v3-2-40f11377fb55@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Now that msi_lib_init_dev_msi_info() overwrites the irq_[un]mask()
callbacks when the MSI_FLAG_PCI_MSI_MASK_PARENT flag is set by the parent
domain, the conditional [un]mask logic is obsolete.
Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250903135433.444329373@linutronix.de
|
|
For systems that implement interrupt masking at the interrupt controller
level, the MSI library offers MSI_FLAG_PCI_MSI_MASK_PARENT. It indicates
that it isn't enough to only unmask the interrupt at the PCI device level,
but that the interrupt controller must also be involved.
However, the way this is currently done is less than optimal, as the
masking/unmasking is done on both sides, always. It would be far cheaper to
unmask both at the start of times, and then only deal with the interrupt
controller mask, which is cheaper than a round-trip to the PCI endpoint.
Now that the PCI/MSI layer implements irq_startup() and irq_shutdown()
callbacks, which [un]mask at the PCI level and honor the request to
[un]mask the parent, this can be trivially done.
Overwrite the irq_mask/unmask() callbacks of the device domain interrupt
chip with irq_[un]mask_parent() when the parent domain asks for it.
[ tglx: Adopted to the PCI/MSI changes ]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250903135433.380783272@linutronix.de
|
|
UFS is the primary storage for the Radxa NIO 12L. Enable it
now that the ufshci and ufsphy nodes are available in the
common mt8195 dtsi.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Link: https://lore.kernel.org/r/20250905-radxa-nio-12l-ufs-v1-1-e2468bfd2c69@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
A value of 10 is not valid for "mediatek,pull-down-adv" and
"mediatek,pull-up-adv" properties which have defined values of 0-3. It
appears the "10" was written as a binary value. The driver only looks at
the lowest 2 bits, so the value "10" decimal works out the same as if
"2" was used.
Fixes: cd894e274b74 ("arm64: dts: mt8183: Add krane-sku176 board")
Fixes: 19b6403f1e2a ("arm64: dts: mt8183: add mt8183 pumpkin board")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250722171152.58923-2-robh@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
When test suspend resume with 6.8 based kernel, system can't resume
and I got below error which can be also reproduced with 6.16 rc6+
kernel.
mtk-pcie-gen3 112f0000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x0)
mtk-pcie-gen3 112f0000.pcie: PM: dpm_run_callback(): genpd_resume_noirq returns -110
mtk-pcie-gen3 112f0000.pcie: PM: failed to resume noirq: error -110
After investigation, looks pcie0 has the same problem as pcie1 as
decribed in commit 3d7fdd8e38aa ("arm64: dts: mediatek: mt8195:
Remove suspend-breaking reset from pcie1").
Fixes: ecc0af6a3fe6 ("arm64: dts: mt8195: Add pcie and pcie phy nodes")
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20250721095959.57703-1-guoqing.jiang@canonical.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add module alias to have it autoloaded.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20250909080249.30656-1-andreas@kemnade.info
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add DT support for sht2x chips.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250908-sht2x-v4-4-bc15f68af7de@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add sensirion,sht2x trivial sensors.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250908-sht2x-v4-3-bc15f68af7de@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
array
The documentation of the 'bcm_msg_head' struct does not match how
it is defined in 'bcm.h'. Changed the frames member to a flexible array,
matching the definition in the header file.
See commit 94dfc73e7cf4 ("treewide: uapi: Replace zero-length arrays with
flexible-array members")
Signed-off-by: Alex Tran <alex.t.tran@gmail.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20250904031709.1426895-1-alex.t.tran@gmail.com
Fixes: 94dfc73e7cf4 ("treewide: uapi: Replace zero-length arrays with flexible-array members")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217783
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
A typical set of messages that gets printed as a result of the clocksource
watchdog finding the TSC unstable usually does not contain messages
indicating CPUs being ahead of or behind the CPU from which the check is
carried out. That fact suggests that the TSC does not experience time skew
between CPUs (if the clocksource.verify_n_cpus parameter is set to a
negative value) but quantitative information is missing.
The cs_nsec_max value printed by the "CPU %d check durations" message
actually provides a worst case estimate of the time skew. If all CPUs have
been checked, the cs_nsec_max value multiplied by 2 is the maximum
possible time skew between the TSCs of any two CPUs on the system. The
worst case estimate is derived from two boundary cases:
1. No time is consumed to execute instructions between csnow_begin and
csnow_mid while all the cs_nsec_max time is consumed by the code between
csnow_mid and csnow_end. In this case, the maximum undetectable time skew
of a CPU being ahead would be cs_nsec_max.
2. All the cs_nsec_max time is consumed to execute instructions between
csnow_begin and csnow_mid while no time is consumed by the code between
csnow_mid and csnow_end. In this case, the maximum undetectable time skew
of a CPU being behind would be cs_nsec_max.
The worst case estimate assumes a system experiencing a corner case
consisting of the two boundary cases.
Always print the "CPU %d check durations" message so that the maximum
possible time skew measured by the TSC sync check can be compared to the
time skew measured by the clocksource watchdog.
Signed-off-by: Jiri Wiesner <jwiesner@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/all/aIuXXfdITXdI0lLp@incl
|
|
When testing softirq based hrtimers on an ARM32 board, with high resolution
mode and NOHZ inactive, softirq based hrtimers fail to expire after being
moved away from an offline CPU:
CPU0 CPU1
hrtimer_start(..., HRTIMER_MODE_SOFT);
cpu_down(CPU1) ...
hrtimers_cpu_dying()
// Migrate timers to CPU0
smp_call_function_single(CPU0, returgger_next_event);
retrigger_next_event()
if (!highres && !nohz)
return;
As retrigger_next_event() is a NOOP when both high resolution timers and
NOHZ are inactive CPU0's hrtimer_cpu_base::softirq_expires_next is not
updated and the migrated softirq timers never expire unless there is a
softirq based hrtimer queued on CPU0 later.
Fix this by removing the hrtimer_hres_active() and tick_nohz_active() check
in retrigger_next_event(), which enforces a full update of the CPU base.
As this is not a fast path the extra cost does not matter.
[ tglx: Massaged change log ]
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Co-developed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250805081025.54235-1-wangxiongfeng2@huawei.com
|
|
Add a test case that cs_amp_get_efi_calibration_data() returns data
when it is in the HP-specific EFI variable.
This uses redirected implementation of cs_amp_get_efi_variable() that
only returns data if the passes name and GUID match the HP EFI variable.
A simple test case installs this function hook and then checks that
calibration data is returned.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-ID: <20250909113039.922065-7-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Search for an HP-specific EFI variable for calibration before falling
back to the normal Cirrus Logic EFI variable.
Future HP models will use an HP-defined EFI variable for storage of
amp calibration data. The content is the same as the normal Cirrus
Logic EFI variable.
The first step in cs_amp_get_cal_efi_buffer() is to get the size of
the EFI variable, so this has been made a loop that walks through an
array of possible variables.
A small change is needed to the KUnit test, which is included in this
patch. Originally the cs_amp_lib_test_get_efi_variable() hook function
asserted that the passed name and GUID matched the Cirrus Logic EFI
variable. Obviously this will fail because the code now tries the HP
definition first. The function has been changed to return EFI_NOT_FOUND
instead, which emulates the normal behaviour of trying to get the HP
variable on a system that has the Cirrus variable.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-ID: <20250909113039.922065-6-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add test cases for cs_amp_get_vendor_spkid() for the Lenovo speaker ID
UEFI variable.
This is a simple set of cases:
- EFI variable is not found
- EFI variable size is larger than the expect 1 byte
- EFI variable has invalid value 0
- Lenovo UEFI variable valid values are interpreted correctly
- HP UEFI variable valid values are interpreted correctly
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-ID: <20250909113039.922065-5-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Call cs_amp_get_vendor_spkid() to get use a vendor-specific speaker ID
value, if one exists.
The speaker ID is used to load an appropriate set of firmware files for the
speakers, and is usually read from a GPIO. Some manufacturers are instead
using a custom UEFI variable for the speaker ID.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-ID: <20250909113039.922065-4-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add handling of the Lenovo-specific and HP-specific EFI variables for
speaker ID.
Future Lenovo and HP models will not give the codec driver access to the
speaker detect GPIO. Instead, the BIOS will read the GPIO and create an
EFI variable with a value indicating the state of the GPIO.
The Lenovo and HP EFI variables are both defined to have only two valid
values. But the variable name, GUID and values are different.
This adds a new exported function cs_amp_get_vendor_spkid().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-ID: <20250909113039.922065-3-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename:
CS_AMP_CAL_NAME => CIRRUS_LOGIC_CALIBRATION_EFI_NAME
CS_AMP_CAL_GUID => CIRRUS_LOGIC_CALIBRATION_EFI_GUID
This is to clarify that these are specific to Cirrus Logic,
especially the GUID. As defined by the UEFI specification the GUID
is a vendor identifier, not an EFI variable identifier.
There has been some misunderstanding of the purpose of these, which
has led to the Cirrus Logic GUID value being copied and used for other
vendor's EFI variables. It is rather strange to have data from another
vendor marked with the vendor GUID for Cirrus Logic.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-ID: <20250909113039.922065-2-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently wrong bit depth is exposed in hw params, causing clipped
volume during playback. Expose correct parameters.
Fixes: a126750fc865 ("ASoC: Intel: catpt: PCM operations")
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Message-ID: <20250909092829.375953-1-amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The clockevents core already detached and unregistered it at this stage.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250906064952.3749122-3-maobibo@loongson.cn
|
|
tick_shutdown() sets the state of the clockevent device to detached
first and the invokes clockevents_exchange_device(), which in turn
invokes clockevents_switch_state().
But clockevents_switch_state() returns without invoking the device shutdown
callback as the device is already in detached state. As a consequence the
timer device is not shutdown when a CPU goes offline.
tick_shutdown() does this because it was originally invoked on a online CPU
and not on the outgoing CPU. It therefore could not access the clockevent
device of the already offlined CPU and just set the state.
Since commit 3b1596a21fbf tick_shutdown() is called on the outgoing CPU, so
the hardware device can be accessed.
Remove the state set before calling clockevents_exchange_device(), so that
the subsequent clockevents_switch_state() handles the state transition and
invokes the shutdown callback of the clockevent device.
[ tglx: Massaged change log ]
Fixes: 3b1596a21fbf ("clockevents: Shutdown and unregister current clockevents at CPUHP_AP_TICK_DYING")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20250906064952.3749122-2-maobibo@loongson.cn
|
|
If a GSO skb is sent through a Geneve tunnel and if Geneve options are
added, the split GSO skb might not fit in the MTU anymore and an ICMP
frag needed packet can be generated. In such case the ICMP packet might
go through the segmentation logic (and dropped) later if it reaches a
path were the GSO status is checked and segmentation is required.
This is especially true when an OvS bridge is used with a Geneve tunnel
attached to it. The following set of actions could lead to the ICMP
packet being wrongfully segmented:
1. An skb is constructed by the TCP layer (e.g. gso_type SKB_GSO_TCPV4,
segs >= 2).
2. The skb hits the OvS bridge where Geneve options are added by an OvS
action before being sent through the tunnel.
3. When the skb is xmited in the tunnel, the split skb does not fit
anymore in the MTU and iptunnel_pmtud_build_icmp is called to
generate an ICMP fragmentation needed packet. This is done by reusing
the original (GSO!) skb. The GSO metadata is not cleared.
4. The ICMP packet being sent back hits the OvS bridge again and because
skb_is_gso returns true, it goes through queue_gso_packets...
5. ...where __skb_gso_segment is called. The skb is then dropped.
6. Note that in the above example on re-transmission the skb won't be a
GSO one as it would be segmented (len > MSS) and the ICMP packet
should go through.
Fix this by resetting the GSO information before reusing an skb in
iptunnel_pmtud_build_icmp and iptunnel_pmtud_build_icmpv6.
Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets")
Reported-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://patch.msgid.link/20250904125351.159740-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
