| Age | Commit message (Collapse) | Author |
|---|
|
We need the DRM Rust changes that went into drm-misc before the
existence of the drm-rust tree in here as well.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Stop using the obsolete write_cache_pages and use writeback_iter directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Index allocation requires at least one bit in the $BITMAP attribute to
track usage of index entries. If the bitmap is empty while index blocks
are already present, this reflects on-disk corruption.
syzbot triggered this condition using a malformed NTFS image. During a
rename() operation involving a long filename (which spans multiple
index entries), the empty bitmap allowed the name to be added without
valid tracking. Subsequent deletion of the original entry failed with
-ENOENT, due to unexpected index state.
Reject such cases by verifying that the bitmap is not empty when index
blocks exist.
Reported-by: syzbot+b0373017f711c06ada64@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b0373017f711c06ada64
Fixes: d99208b91933 ("fs/ntfs3: cancle set bad inode after removing name fails")
Tested-by: syzbot+b0373017f711c06ada64@syzkaller.appspotmail.com
Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Add put_bh() to decrease the refcount of 'bh' after the job
is finished, preventing a resource leak.
Fixes: 3f3b442b5ad2 ("fs/ntfs3: Add bitmap")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
The MFT record relative to the file being opened contains its runlist,
an array containing information about the file's location on the physical
disk. Analysis of all Call Stack paths showed that the values of the
runlist array, from which LCNs are calculated, are not validated before
run_unpack function.
The run_unpack function decodes the compressed runlist data format
from MFT attributes (for example, $DATA), converting them into a runs_tree
structure, which describes the mapping of virtual clusters (VCN) to
logical clusters (LCN). The NTFS3 subsystem also has a shortcut for
deleting files from MFT records - in this case, the RUN_DEALLOCATE
command is sent to the run_unpack input, and the function logic
provides that all data transferred to the runlist about file or
directory is deleted without creating a runs_tree structure.
Substituting the runlist in the $DATA attribute of the MFT record for an
arbitrary file can lead either to access to arbitrary data on the disk
bypassing access checks to them (since the inode access check
occurs above) or to destruction of arbitrary data on the disk.
Add overflow check for addition operation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4342306f0f0d ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Vitaly Grigoryev <Vitaly.Grigoryev@kaspersky.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()")
requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/
S_IFIFO/S_IFSOCK type, use S_IFREG for $Extend records.
Reported-by: syzbot <syzbot+895c23f6917da440ed0d@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=895c23f6917da440ed0d
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Add support for the FS_IOC_SETFSLABEL ioctl.
Signed-off-by: Ethan Ferguson <ethan.ferguson@zetier.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Add support for the FS_IOC_GETFSLABEL ioctl.
Signed-off-by: Ethan Ferguson <ethan.ferguson@zetier.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Use the common FSLABEL_MAX constant instead of a hardcoded magic
constant of 256.
Signed-off-by: Ethan Ferguson <ethan.ferguson@zetier.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
The Loongson-2K1000 NAND controller is also similar to the Loongson-1C.
It supports a maximum capacity of 16GB FLASH per chip with a maximum
page size of 8KB, and it supports up to 4 chip selects and 4 RDY
signals.
The key difference from the Loongson-2K0500 is that it requires explicit
configuration of the DMA control route. Typically, it is configured as
APBDMA0.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Loongson-2K1000 NAND controller
Add new compatible for the Loongson-2K NAND controller used for
Loongson-2K1000 SoC.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The Loongson-2K0500 NAND controller is similar to the Loongson-1C.
It supports a maximum capacity of 16GB FLASH per chip with a maximum
page size of 8KB, and it supports up to 4 chip selects and 4 RDY
signals.
Its DMA controller is defaulted to APBDMA0.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Loongson-2K0500 NAND controller
Add new compatible for the Loongson-2K NAND controller used for
Loongson-2K0500 SoC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The page address register describes the page address of the starting
address for NAND read/write/erase operations.
According to the manual, it consists of two parts:
{chip select, page number}
The `chip select` is fixed at 2 bits, and the `page number` is
determined based on the actual capacity of the single-chip memory.
Therefore we need to determine the `chip select` bits base on the `page
number`.
For example, for a 1GB capacity chip (2K page size), it has 1M pages.
Thus, [19:0] is used to represent the page number, and [21:20]
represents the chip select.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Loongson-1C and Loongson-2K SoCs support NAND flash chips with 6-byte ID.
However, the current implementation only handles 5-byte ID which can lead
to incorrect chip detection.
Extend loongson_nand_read_id_type_exec() to support 6-byte NAND ID.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
I am going to introduce the NAND controllers of the Loongson-2K series
CPUs, which are similar to Loongson-1.
As preparation, rename all prefixes from Loongson1-specific to
Loongson-generic.
No functional change intended.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Currently, sta_set_sinfo() fails to populate link-level station info
when sinfo->valid_links is initially 0 and sta->sta.valid_links has
bits set for links other than link 0. This typically occurs when
association happens on a non-zero link or link 0 deleted dynamically.
In such cases, the for_each_valid_link(sinfo, link_id) loop only
executes for link 0 and terminates early, since sinfo->valid_links
remains 0. As a result, only MLD-level information is reported to
userspace.
Hence to fix, initialize sinfo->valid_links with sta->sta.valid_links
before entering the loop to ensure loop executes for each valid link.
During iteration, mask out invalid links from sinfo->valid_links if
any of sta->link[link_id], sdata->link[link_id], or sinfo->links[link_id]
are not present, to report only valid link information.
Fixes: 505991fba9ec ("wifi: mac80211: extend support to fill link level sinfo structure")
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250904104054.790321-1-quic_sarishar@quicinc.com
[clarify comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
BBM protocol supports a single power button, supported by driver
imx-sm-bbm-key.c. By default this is KEY_POWER, but can also be overwritten
using linux,code. Add a reference to this schema and add linux,code as a
supported property.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The device minor should not be cleared after the device is released.
Fixes: 9e14868dc952 ("media: mc: Clear minor number reservation at unregistration time")
Cc: stable@vger.kernel.org
Reported-by: syzbot+031d0cfd7c362817963f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=031d0cfd7c362817963f
Tested-by: syzbot+031d0cfd7c362817963f@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The PM usage counter of isys was bumped up when start camera stream
(opening firmware) but it was not dropped after stream stop(closing
firmware), it forbids system fail to suspend due to the wrong PM state
of ISYS. This patch drop the PM usage counter in firmware close to fix
it.
Cc: Stable@vger.kernel.org
Fixes: a516d36bdc3d ("media: staging/ipu7: add IPU7 input system device driver")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Replace verbatim license text with a `SPDX-License-Identifier`.
The comment header mis-attributes this license to be "X11", but the
license text does not include the last line "Except as contained in this
notice, the name of the X Consortium shall not be used in advertising or
otherwise to promote the sale, use or other dealings in this Software
without prior written authorization from the X Consortium.". Therefore,
this license is actually equivalent to the SPDX "MIT" license (confirmed
by text diffing).
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Currently the error check from the call to platform_get_irq is always
false because an unsigned int chip->irq.parents[i] is being used to
to perform the less than zero error check. Fix this by using the int
variable ret to perform the check.
Fixes: 03c146cb6cd1 ("gpio: loongson-64bit: Add support for Loongson-2K0300 SoC")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250909190356.870000-1-colin.i.king@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Prevent PMECC errors when reading from AMD/Spansion S34ML02G1 flash on
SAM9X60 SoC, after switching to ONFI timing mode 3.
From reading the S34ML02G1 and the SAM9X60 datasheets again, it seems
like we have to wait tREA after rising RE# before sampling the data.
Thus pulse must be at least tREA.
The previous approach to set this timing worked on sam9g20 and sama5d2
with the same flash (S34ML02G1), probably because those have a slower
mck clock rate and thus the resolution of the timings setup is not as
tight as with sam9x60.
The approach to fix the issue was carried over from u-boot, which itself
got it from at91bootstrap. It has been successfully tested in
at91bootstrap, U-Boot and Linux on sam9x60 and sama5d2, for several
months here.
Link: https://github.com/linux4sam/at91bootstrap/issues/174
Link: https://github.com/linux4sam/at91bootstrap/commit/e2dfd8141d00613a37acee66ef5724f70f34a538
Link: https://lore.kernel.org/u-boot/20240415075755.780653-1-ada@thorsis.com/
Link: https://source.denx.de/u-boot/u-boot/-/commit/344e2f2cd4a407f847b301804f37d036e8a0a10c
Cc: Li Bin <bin.li@microchip.com>
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Trivial fix to spelling mistake in comment text.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
This is meant to resolve reboot not working on this board.
The problem is as follows. In order to be able to switch from HS to UHS
mode the bus voltage needs to be reduced from 3.3V down to 1.8V and this
is achieved by the "vqmmc-supply" regulator. The ROM bootloader is only
able to manage the card in HS mode (3.3V) and the switch HS->UHS happen
at boottime in the kernel. The problem appears when the reboot command
is issued or watchdog expires because in this case the "vqmmc-supply"
voltage is not returned back at 3.3V before rebooting the board so the
ROM bootloader will be completely stuck.
Therefore this commit removes all UHS modes which would cause
"vqmmc-summply" to switch from 3.3V to 1.8V.
In terms of performance the main drawback of this commit is limiting the
SD card bus speed to HS (25 MB/s) instead of UHS DDR50 (50 MB/s). However
this comes with the benefit of being able to reboot the board, so it
sounds like a reasonable compromise.
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Link: https://lore.kernel.org/r/20250908-fix-reboot-v2-1-354d0e57c855@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Fix reg address for c3 pwm node.
Fixes: be90cd4bd422 ("arm64: dts: amlogic: Add Amlogic C3 PWM")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250717-fix-pwm-node-v2-1-7365ac7d5320@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Enabling compile testing should not enable every individual driver (we
have "allyesconfig" for that).
Fixes: 4a434abc40d2 ("firmware: meson-sm: enable build as module")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250725075429.10056-1-johan@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Pinned suspend eviction and preparation for eviction validates
system memory for eviction buffers. Do that under a
validation exclusive lock to avoid interfering with other
processes validating system graphics memory.
v2:
- Avoid gotos from within xe_validation_guard().
- Adapt to signature change of xe_validation_guard().
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250908101246.65025-14-thomas.hellstrom@linux.intel.com
|
|
A common pattern is to create a locked bo, pin it without mapping
and then unlock it. Add a function to do that, which internally
uses xe_validation_guard().
With that we can remove xe_bo_create_locked_range() and add
exhaustive eviction to stolen, pf_provision_vf_lmem and
psmi_alloc_object.
v4:
- New patch after reorganization.
v5:
- Replace DRM_XE_GEM_CPU_CACHING_WB with 0. (CI)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250908101246.65025-13-thomas.hellstrom@linux.intel.com
|
|
Introduce an xe_bo_create_pin_map_novm() function that does not
take the drm_exec paramenter to simplify the conversion of many
callsites.
For the rest, ensure that the same drm_exec context that was used
for locking the vm is passed down to validation.
Use xe_validation_guard() where appropriate.
v2:
- Avoid gotos from within xe_validation_guard(). (Matt Brost)
- Break out the change to pf_provision_vf_lmem8 to a separate
patch.
- Adapt to signature change of xe_validation_guard().
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250908101246.65025-12-thomas.hellstrom@linux.intel.com
|
|
Most users of xe_bo_create_pin_map_at() and
xe_bo_create_pin_map_at_aligned() are not using the vm parameter,
and that simplifies conversion. Introduce an
xe_bo_create_pin_map_at_novm() function and make the _aligned()
version static. Use xe_validation_guard() for conversion.
v2:
- Adapt to signature change of xe_validation_guard(). (Matt Brost)
- Fix up documentation.
v4:
- Postpone the change to i915_gem_stolen_insert_node_in_range() to
a later patch.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250908101246.65025-11-thomas.hellstrom@linux.intel.com
|
|
Don't start external function names with underscores.
Rename to xe_bo_init_locked().
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250908101246.65025-10-thomas.hellstrom@linux.intel.com
|
|
Convert dma-buf migration to XE_PL_TT and dma-buf import to
support exhaustive eviction, using xe_validation_guard().
It seems unlikely that the import would result in an -ENOMEM,
but convert import anyway for completeness.
The dma-buf map_attachment() functionality unfortunately doesn't
support passing a drm_exec, which means that foreign devices
validating a dma-buf that we exported will not, unless they are
xeKMD devices, participate in the exhaustive eviction scheme.
v2:
- Avoid gotos from within xe_validation_guard(). (Matt Brost)
- Adapt to signature change of xe_validation_guard(). (Matt Brost)
- Remove an unneeded (void)ret. (Matt Brost)
- Fix up an error path.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250908101246.65025-9-thomas.hellstrom@linux.intel.com
|
|
Convert __xe_pin_fb_vma() for exhaustive eviction
using xe_validation_guard().
v2:
- Avoid gotos from within xe_validation_guard(). (Matt Brost)
- Adapt to signature change of xe_validation_guard(). (Matt Brost)
- Use interruptible waiting, since xe_bo_migrate() already does that.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250908101246.65025-8-thomas.hellstrom@linux.intel.com
|
|
The CPU fault handler may populate bos and migrate, and in doing
so might interfere with other tasks validating.
Rework the CPU fault handler completely into a fastpath
and a slowpath. The fastpath trylocks only the validation lock
in read-mode. If that fails, there's a fallback to the
slowpath, where we do a full validation transaction.
This mandates open-coding of bo locking, bo idling and
bo populating, but we still call into TTM for fault
finalizing.
v2:
- Rework the CPU fault handler to actually take part in
the exhaustive eviction scheme (Matthew Brost).
v3:
- Don't return anything but VM_FAULT_RETRY if we've dropped the
mmap_lock. Not even if a signal is pending.
- Rebase on gpu_madvise() and split out fault migration.
- Wait for idle after migration.
- Check whether the resource manager uses tts to determine
whether to map the tt or iomem.
- Add a number of asserts.
- Allow passing a ttm_operation_ctx to xe_bo_migrate() so that
it's possible to try non-blocking migration.
- Don't fall through to TTM on migration / population error
Instead remove the gfp_retry_mayfail in mode 2 where we
must succeed. (Matthew Brost)
v5:
- Don't allow faulting in the imported bo case (Matthew Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthews Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250908101246.65025-7-thomas.hellstrom@linux.intel.com
|
|
Convert existing drm_exec transactions, like GT pagefault validation,
non-LR exec() IOCTL and the rebind worker to support
exhaustive eviction using the xe_validation_guard().
v2:
- Adapt to signature change in xe_validation_guard() (Matt Brost)
- Avoid gotos from within xe_validation_guard() (Matt Brost)
- Check error return from xe_validation_guard()
v3:
- Rebase on gpu_madvise()
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v1
Link: https://lore.kernel.org/r/20250908101246.65025-6-thomas.hellstrom@linux.intel.com
|
|
Convert SVM validation to support exhaustive eviction,
using xe_validation_guard().
v2:
- Wrap also xe_vm_range_rebind (Matt Brost)
- Adapt to argument changes of xe_validation_guard().
v5:
- Rebase on SVM stats.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250908101246.65025-5-thomas.hellstrom@linux.intel.com
|
|
Use the xe_validation_guard() to convert xe_bo_create_user()
for exhaustive eviction.
v2:
- Adapt to argument changes of xe_validation_guard()
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v1
Link: https://lore.kernel.org/r/20250908101246.65025-4-thomas.hellstrom@linux.intel.com
|
|
Introduce a validation wrapper xe_validation_guard() as a helper
intended to be used around drm_exec transactions what perform
validations. Once TTM can handle exhaustive eviction we could
remove this wrapper or make it mostly a NO-OP unless other
functionality is added to it.
Currently the wrapper takes a read lock upon entry and if the
transaction hits an OOM, all locks are released and the
transaction is retried with a write-lock. If all other
validations participate in this scheme, the transaction with
the write lock will be the only transaction validating and
should have access to all available non-pinned memory.
There is currently a problem in that TTM converts -EDEADLOCKS to
-ENOMEM, and with ww_mutex slowpath error injections, we can hit
-ENOMEMs without having actually ran out of memory. We abuse
ww_mutex internals to detect such situations until TTM is fixes
to not convert the error code. In the meantime, injecting
ww_mutex slowpath -EDEADLOCKs is a good way to test
the implementation in the absence of real OOMs.
Just introduce the wrapper in this commit. It will be hooked up
to the driver in following commits.
v2:
- Mark class_xe_validation conditional so that the loop is
skipped on initialization error.
- Argument sanitation (Matt Brost)
- Fix conditional execution of xe_validation_ctx_fini()
(Matt Brost)
- Add a no_block mode for upcoming use in the CPU fault handler.
v4:
- Update kerneldoc. (Xe CI).
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250908101246.65025-3-thomas.hellstrom@linux.intel.com
|
|
We want all validation (potential backing store allocation) to be part
of a drm_exec transaction. Therefore add a drm_exec pointer argument
to xe_bo_validate() and ___xe_bo_create_locked(). Upcoming patches
will deal with making all (or nearly all) calls to these functions
part of a drm_exec transaction. In the meantime, define special values
of the drm_exec pointer:
XE_VALIDATION_UNIMPLEMENTED: Implementation of the drm_exec transaction
has not been done yet.
XE_VALIDATION_UNSUPPORTED: Some Middle-layers (dma-buf) doesn't allow
the drm_exec context to be passed down to map_attachment where
validation takes place.
XE_VALIDATION_OPT_OUT: May be used only for kunit tests where exhaustive
eviction isn't crucial and the ROI of converting those is very
small.
For XE_VALIDATION_UNIMPLEMENTED and XE_VALIDATION_OPT_OUT there is also
a lockdep check that a drm_exec transaction can indeed start at the
location where the macro is expanded. This is to encourage
developers to take this into consideration early in the code
development process.
v2:
- Fix xe_vm_set_validation_exec() imbalance. Add an assert that
hopefully catches future instances of this (Matt Brost)
v3:
- Extend to psmi_alloc_object
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v3
Link: https://lore.kernel.org/r/20250908101246.65025-2-thomas.hellstrom@linux.intel.com
|
|
nl80211_get_station() for MLO
Currently, nl80211_get_station() allocates a fixed buffer size using
NLMSG_DEFAULT_SIZE. In multi-link scenarios - particularly when the
number of links exceeds two - this buffer size is often insufficient
to accommodate complete station statistics, resulting in "no buffer
space available" errors.
To address this, modify nl80211_get_station() to return only
accumulated station statistics and exclude per link stats.
Pass a new flag (link_stats) to nl80211_send_station() to control
the inclusion of per link statistics. This allows retaining
detailed output with per link data in dump commands, while
excluding it from other commands where it is not needed.
This change modifies the handling of per link stats introduced in
commit 82d7f841d9bd ("wifi: cfg80211: extend to embed link level
statistics in NL message") to enable them only for
nl80211_dump_station().
Apply the same fix to cfg80211_del_sta_sinfo() by skipping per link
stats to avoid buffer issues. cfg80211_new_sta() doesn't include
stats and is therefore not impacted.
Fixes: 82d7f841d9bd ("wifi: cfg80211: extend to embed link level statistics in NL message")
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20250905124800.1448493-1-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
iwlwifi fix
====================
Which is a fix for (old) 130/1030 devices to work again.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v6.17-rc6
==================
There's a firmware API alignment fix, and a fix for powersave,
both for ath12k.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The VPU33 found in the SM8650 Platform requires some slighly different
buffer calculation for encoding to allow working with the latest
firwware uploaded on linux-firmware at [1].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=ece445af91bbee49bf0d8b23c2b99b596ae6eac7
Suggested-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for handling start and stop commands, including the
end-of-stream (drain) sequence, in the encoder video device.
This enables proper signaling to the firmware and ensures that all
pending frames are processed and flushed before completing the stream.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Implement support for queuing and dequeuing input and output buffers
for the encoder video device using the appropriate V4L2 buffer
management ioctls.
This enables userspace applications to manage streaming buffers
required for encoding operations.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
[bod: drop dead code size_enc_single_pipe()]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for allocating and queuing internal buffers required by the
encoder. The sizes of these buffers are derived from hardware
specifications and are essential to meet the encoder's functional and
performance requirements.
These buffers are not exposed to userspace; they are allocated and
managed internally to ensure correct and efficient hardware operation.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
[bod: added sm8750 enc_op_int_buf_tbl enumeration during merge]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Initialize and configure platform-specific capabilities for the encoder
in the firmware during stream-on, to tailor encoding behavior to the
current session's requirements. Some of these capabilities can also be
updated dynamically when V4L2 controls are modified by the client after
stream-on.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for V4L2 streaming operations on the encoder video device.
During stream-on, configure mandatory properties on the respective
planes and notify the firmware to initiate an encode session.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
[bod: add sm8750 enc/dec declarations during merge process]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add platform-specific capabilities for the encoder video device and
initialize the corresponding controls in the control handler.
This enables proper configuration and handling of encoder-specific
features based on platform requirements.
Co-developed-by: Wangao Wang <quic_wangaow@quicinc.com>
Signed-off-by: Wangao Wang <quic_wangaow@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
[bod: add sm8750 inst_fw_caps_enc/inst_fw_caps_dec]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
