| Age | Commit message (Collapse) | Author |
|---|
|
Correct audio-codec interrupt should be PX3 while PX1 is used for external
microphone detection.
Tested-by: Winona Schroeer-Smith <wolfizen@wolfizen.net> # ASUS SL101
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # ASUS TF101
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add missing interrupt to magnetometer node.
Tested-by: Winona Schroeer-Smith <wolfizen@wolfizen.net> # ASUS SL101
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # ASUS TF101
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add DFLL clock node to common Tegra114 device tree along with clocks
property to cpu node.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Existing touchscreen clipping is too small and causes problems with
touchscreen accuracy.
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
|
|
The DVCO present in the DFLL IP block has a separate reset line, exposed
via the CAR IP block. This reset line is asserted upon SoC reset.
Unless something (such as the DFLL driver) deasserts this line, the DVCO
will not oscillate, although reads and writes to the DFLL IP block will
complete.
Based on a3c83ff2 ("clk: tegra: Add DFLL DVCO reset control for Tegra124")
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
|
|
Add a compatible for ASUS Eee Pad Transformer TF101G and ASUS Eee Pad
Slider SL101.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The way that resets are handled on these Tegra devices is that there is a
set of peripheral clocks & resets which are paired up. This is because they
are laid out in banks within the CAR (clock and reset) controller. In most
cases we're referring to those resets, so you'll often see a clock ID used
in conjection with the same reset ID for a given IP block.
In addition to those peripheral resets, there are a number of extra resets
that don't have a corresponding clock and which are exposed in registers
outside of the peripheral banks, but still part of the CAR. To support
those "special" registers, the TEGRA*_RESET() is used to denote resets
outside of the regular peripheral resets. Essentially it defines the offset
within the CAR at which special resets start. In the above case, Tegra114
has 5 banks with 32 peripheral resets each. The first special reset,
TEGRA114_RESET(0), therefore gets ID 5 * 32 + 0 = 160.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
This effectively reverts commit 4c3fe5eae46b ("drm/xe/pf: Limit
fair VF LMEM provisioning") since we don't need it any more after
non-contig VRAM allocations were fixed. This allows larger LMEM
auto-provisioning for VFs, so instead:
[ ] GT0: PF: LMEM available(14096M) fair(1 x 8192M)
[ ] GT0: PF: VF1 provisioned with 8589934592 (8.00 GiB) LMEM
or
[ ] GT0: PF: LMEM available(14096M) fair(2 x 4096M)
[ ] GT0: PF: VF1..VF2 provisioned with 4294967296 (4.00 GiB) LMEM
we may get:
[ ] GT0: PF: LMEM available(14096M) fair(1 x 14096M)
[ ] GT0: PF: VF1 provisioned with 14780727296 (13.8 GiB) LMEM
and
[ ] GT0: PF: LMEM available(14096M) fair(2 x 7048M)
[ ] GT0: PF: VF1..VF2 provisioned with 7390363648 (6.88 GiB) LMEM
Fixes: 1e32ffbc9dc8 ("drm/xe/sriov: support non-contig VRAM provisioning")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250910222439.32869-1-michal.wajdeczko@intel.com
|
|
Add missing Tegra114 nvmem cells and fuse lookups which were added for
Tegra124+ but omitted for Tegra114.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
in case no efi.get_variable exsits
A a potential race condition reported by one of my customers that leads to
a NULL pointer dereference, where the call to efi.get_variable should be
guarded with efi_rt_services_supported() to ensure that function exists.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Merge devfreq updates for v6.18 from Chanwoo Choi:
"- Add support for LPDDR5 for Rockhip RK3588 SoC on rockchip-dfi devfreq
driver.
- Fix an issue where DDR cycle counts on RK3588/RK3528 with LPDDR4(X)
are reported as half by adding a cycle multiplier to the DFI driver
on rockchip-dfi devfreq-event driver.
- Fix missing error pointer dereference of regulator instance
and remove redundant condition on on mtk-cci-devfreq.c devfreq
driver."
* tag 'devfreq-next-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: rockchip-dfi: add support for LPDDR5
PM / devfreq: rockchip-dfi: double count on RK3588
PM / devfreq: mtk-cci: avoid redundant conditions
PM / devfreq: mtk-cci: Fix potential error pointer dereference in probe()
|
|
Replace kzalloc() followed by copy_from_user() with memdup_user() to
improve and simplify svm_set_nested_state().
Return early if an error occurs instead of trying to allocate memory for
'save' when memory allocation for 'ctl' already failed.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250903002951.118912-1-thorsten.blum@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a compatible for the Xiaomi Mi Pad (A0101) tablet.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Tegra30 has CSI pad clock enable bits embedded into PLLD/PLLD2 registers.
Add ids for these clocks. Additionally, move TEGRA30_CLK_CLK_MAX into
clk-tegra30 source.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The avdd-dsi-csi-supply is CSI power supply, it has nothing to do with
VI, like same supply is used with DSI and has nothing to do with DC.
Move it to correct place.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The commit b2798ba0b876 ("KVM: X86: Choose qspinlock when dedicated
physical CPUs are available") states that when PV_DEDICATED=1
(vCPU has dedicated pCPU), qspinlock should be preferred regardless of
PV_UNHALT. However, the current implementation doesn't reflect this: when
PV_UNHALT=0, we still use virt_spin_lock() even with dedicated pCPUs.
This is suboptimal because:
1. Native qspinlocks should outperform virt_spin_lock() for dedicated
vCPUs irrespective of HALT exiting
2. virt_spin_lock() should only be preferred when vCPUs may be preempted
(non-dedicated case)
So reorder the PV spinlock checks to:
1. First handle dedicated pCPU case (disable virt_spin_lock_key)
2. Second check single CPU, and nopvspin configuration
3. Only then check PV_UNHALT support
This ensures we always use native qspinlock for dedicated vCPUs, delivering
pretty performance gains at high contention levels.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Wangyang Guo <wangyang.guo@intel.com>
Link: https://lore.kernel.org/r/20250722110005.4988-1-lirongqing@baidu.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Make kvm_async_pf_task_wake() static and drop its export, as the symbol is
only referenced from within kvm.c.
No functional change intended.
Link: https://lore.kernel.org/r/20250729153901.564123-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When running as an SNP or TDX guest under KVM, force the legacy PCI hole,
i.e. memory between Top of Lower Usable DRAM and 4GiB, to be mapped as UC
via a forced variable MTRR range.
In most KVM-based setups, legacy devices such as the HPET and TPM are
enumerated via ACPI. ACPI enumeration includes a Memory32Fixed entry, and
optionally a SystemMemory descriptor for an OperationRegion, e.g. if the
device needs to be accessed via a Control Method.
If a SystemMemory entry is present, then the kernel's ACPI driver will
auto-ioremap the region so that it can be accessed at will. However, the
ACPI spec doesn't provide a way to enumerate the memory type of
SystemMemory regions, i.e. there's no way to tell software that a region
must be mapped as UC vs. WB, etc. As a result, Linux's ACPI driver always
maps SystemMemory regions using ioremap_cache(), i.e. as WB on x86.
The dedicated device drivers however, e.g. the HPET driver and TPM driver,
want to map their associated memory as UC or WC, as accessing PCI devices
using WB is unsupported.
On bare metal and non-CoCO, the conflicting requirements "work" as firmware
configures the PCI hole (and other device memory) to be UC in the MTRRs.
So even though the ACPI mappings request WB, they are forced to UC- in the
kernel's tracking due to the kernel properly handling the MTRR overrides,
and thus are compatible with the drivers' requested WC/UC-.
With force WB MTRRs on SNP and TDX guests, the ACPI mappings get their
requested WB if the ACPI mappings are established before the dedicated
driver code attempts to initialize the device. E.g. if acpi_init()
runs before the corresponding device driver is probed, ACPI's WB mapping
will "win", and result in the driver's ioremap() failing because the
existing WB mapping isn't compatible with the requested WC/UC-.
E.g. when a TPM is emulated by the hypervisor (ignoring the security
implications of relying on what is allegedly an untrusted entity to store
measurements), the TPM driver will request UC and fail:
[ 1.730459] ioremap error for 0xfed40000-0xfed45000, requested 0x2, got 0x0
[ 1.732780] tpm_tis MSFT0101:00: probe with driver tpm_tis failed with error -12
Note, the '0x2' and '0x0' values refer to "enum page_cache_mode", not x86's
memtypes (which frustratingly are an almost pure inversion; 2 == WB, 0 == UC).
E.g. tracing mapping requests for TPM TIS yields:
Mapping TPM TIS with req_type = 0
WARNING: CPU: 22 PID: 1 at arch/x86/mm/pat/memtype.c:530 memtype_reserve+0x2ab/0x460
Modules linked in:
CPU: 22 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc7+ #2 VOLUNTARY
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/29/2025
RIP: 0010:memtype_reserve+0x2ab/0x460
__ioremap_caller+0x16d/0x3d0
ioremap_cache+0x17/0x30
x86_acpi_os_ioremap+0xe/0x20
acpi_os_map_iomem+0x1f3/0x240
acpi_os_map_memory+0xe/0x20
acpi_ex_system_memory_space_handler+0x273/0x440
acpi_ev_address_space_dispatch+0x176/0x4c0
acpi_ex_access_region+0x2ad/0x530
acpi_ex_field_datum_io+0xa2/0x4f0
acpi_ex_extract_from_field+0x296/0x3e0
acpi_ex_read_data_from_field+0xd1/0x460
acpi_ex_resolve_node_to_value+0x2ee/0x530
acpi_ex_resolve_to_value+0x1f2/0x540
acpi_ds_evaluate_name_path+0x11b/0x190
acpi_ds_exec_end_op+0x456/0x960
acpi_ps_parse_loop+0x27a/0xa50
acpi_ps_parse_aml+0x226/0x600
acpi_ps_execute_method+0x172/0x3e0
acpi_ns_evaluate+0x175/0x5f0
acpi_evaluate_object+0x213/0x490
acpi_evaluate_integer+0x6d/0x140
acpi_bus_get_status+0x93/0x150
acpi_add_single_object+0x43a/0x7c0
acpi_bus_check_add+0x149/0x3a0
acpi_bus_check_add_1+0x16/0x30
acpi_ns_walk_namespace+0x22c/0x360
acpi_walk_namespace+0x15c/0x170
acpi_bus_scan+0x1dd/0x200
acpi_scan_init+0xe5/0x2b0
acpi_init+0x264/0x5b0
do_one_initcall+0x5a/0x310
kernel_init_freeable+0x34f/0x4f0
kernel_init+0x1b/0x200
ret_from_fork+0x186/0x1b0
ret_from_fork_asm+0x1a/0x30
</TASK>
The above traces are from a Google-VMM based VM, but the same behavior
happens with a QEMU based VM that is modified to add a SystemMemory range
for the TPM TIS address space.
The only reason this doesn't cause problems for HPET, which appears to
require a SystemMemory region, is because HPET gets special treatment via
x86_init.timers.timer_init(), and so gets a chance to create its UC-
mapping before acpi_init() clobbers things. Disabling the early call to
hpet_time_init() yields the same behavior for HPET:
[ 0.318264] ioremap error for 0xfed00000-0xfed01000, requested 0x2, got 0x0
Hack around the ACPI gap by forcing the legacy PCI hole to UC when
overriding the (virtual) MTRRs for CoCo guest, so that ioremap handling
of MTRRs naturally kicks in and forces the ACPI mappings to be UC.
Note, the requested/mapped memtype doesn't actually matter in terms of
accessing the device. In practically every setup, legacy PCI devices are
emulated by the hypervisor, and accesses are intercepted and handled as
emulated MMIO, i.e. never access physical memory and thus don't have an
effective memtype.
Even in a theoretical setup where such devices are passed through by the
host, i.e. point at real MMIO memory, it is KVM's (as the hypervisor)
responsibility to force the memory to be WC/UC, e.g. via EPT memtype
under TDX or real hardware MTRRs under SNP. Not doing so cannot work,
and the hypervisor is highly motivated to do the right thing as letting
the guest access hardware MMIO with WB would likely result in a variety
of fatal #MCs.
In other words, forcing the range to be UC is all about coercing the
kernel's tracking into thinking that it has established UC mappings, so
that the ioremap code doesn't reject mappings from e.g. the TPM driver and
thus prevent the driver from loading and the device from functioning.
Note #2, relying on guest firmware to handle this scenario, e.g. by setting
virtual MTRRs and then consuming them in Linux, is not a viable option, as
the virtual MTRR state is managed by the untrusted hypervisor, and because
OVMF at least has stopped programming virtual MTRRs when running as a TDX
guest.
Link: https://lore.kernel.org/all/8137d98e-8825-415b-9282-1d2a115bb51a@linux.intel.com
Fixes: 8e690b817e38 ("x86/kvm: Override default caching mode for SEV-SNP and TDX")
Cc: stable@vger.kernel.org
Cc: Peter Gonda <pgonda@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jürgen Groß <jgross@suse.com>
Cc: Korakit Seemakhupt <korakit@google.com>
Cc: Jianxiong Gao <jxgao@google.com>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Suggested-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Tested-by: Korakit Seemakhupt <korakit@google.com>
Link: https://lore.kernel.org/r/20250828005249.39339-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extend the fastops test coverage to DIV and IDIV, specifically to provide
coverage for #DE (divide error) exceptions, as #DE is the only exception
that can occur in KVM's fastops path, i.e. that requires exception fixup.
Link: https://lore.kernel.org/r/20250909202835.333554-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a fastop() macro along with macros to define its required constraints,
and use the macros to dedup the innermost guts of the fastop testcases.
No functional change intended.
Link: https://lore.kernel.org/r/20250909202835.333554-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extend the fastops test to cover instructions that operate on 8-bit data.
Support for 8-bit instructions was omitted from the original commit purely
due to complications with BT not having a r/m8 variant. To keep the
RFLAGS.CF behavior deterministic and not heavily biased to '0' or '1',
continue using BT, but cast and load the to-be-tested value into a
dedicated 32-bit constraint.
Supporting 8-bit operations will allow using guest_test_fastops() as-is to
provide full coverage for DIV and IDIV. For divide operations, covering
all operand sizes _is_ interesting, because KVM needs provide exception
fixup for each size (failure to handle a #DE could panic the host).
Link: https://lore.kernel.org/all/aIF7ZhWZxlkcpm4y@google.com
Link: https://lore.kernel.org/r/20250909202835.333554-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add support for handling #DE (divide error) exceptions in KVM selftests
so that the fastops test can verify KVM correctly handles #DE when
emulating DIV or IDIV on behalf of the guest. Morph #DE to 0xff (i.e.
to -1) as a mostly-arbitrary vector to indicate #DE, so that '0' (the
real #DE vector) can still be used to indicate "no exception".
Link: https://lore.kernel.org/r/20250909202835.333554-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, netfilter and wireless.
We have an IPv6 routing regression with the relevant fix still a WiP.
This includes a last-minute revert to avoid more problems.
Current release - new code bugs:
- wifi: nl80211: completely disable per-link stats for now
Previous releases - regressions:
- dev_ioctl: take ops lock in hwtstamp lower paths
- netfilter:
- fix spurious set lookup failures
- fix lockdep splat due to missing annotation
- genetlink: fix genl_bind() invoking bind() after -EPERM
- phy: transfer phy_config_inband() locking responsibility to phylink
- can: xilinx_can: fix use-after-free of transmitted SKB
- hsr: fix lock warnings
- eth:
- igb: fix NULL pointer dereference in ethtool loopback test
- i40e: fix Jumbo Frame support after iPXE boot
- macsec: sync features on RTM_NEWLINK
Previous releases - always broken:
- tunnels: reset the GSO metadata before reusing the skb
- mptcp: make sync_socket_options propagate SOCK_KEEPOPEN
- can: j1939: implement NETDEV_UNREGISTER notification hanidler
- wifi: ath12k: fix WMI TLV header misalignment"
* tag 'net-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
Revert "net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups"
hsr: hold rcu and dev lock for hsr_get_port_ndev
hsr: use hsr_for_each_port_rtnl in hsr_port_get_hsr
hsr: use rtnl lock when iterating over ports
wifi: nl80211: completely disable per-link stats for now
net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups
net: ethtool: fix wrong type used in struct kernel_ethtool_ts_info
MAINTAINERS: add Phil as netfilter reviewer
netfilter: nf_tables: restart set lookup on base_seq change
netfilter: nf_tables: make nft_set_do_lookup available unconditionally
netfilter: nf_tables: place base_seq in struct net
netfilter: nft_set_rbtree: continue traversal if element is inactive
netfilter: nft_set_pipapo: don't check genbit from packetpath lookups
netfilter: nft_set_bitmap: fix lockdep splat due to missing annotation
can: rcar_can: rcar_can_resume(): fix s2ram with PSCI
can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB
can: j1939: j1939_local_ecu_get(): undo increment when j1939_local_ecu_get() fails
can: j1939: j1939_sk_bind(): call j1939_priv_put() immediately when j1939_local_ecu_get() failed
can: j1939: implement NETDEV_UNREGISTER notification handler
selftests: can: enable CONFIG_CAN_VCAN as a module
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- ptep_modify_prot_start() may be called in a loop, which might lead to
the preempt_count overflow due to the unnecessary preemption
disabling. Do not disable preemption to prevent the overflow
- Events of type PERF_TYPE_HARDWARE are not tested for sampling and
return -EOPNOTSUPP eventually.
Instead, deny all sampling events by CPUMF counter facility and
return -ENOENT to allow other PMUs to be tried
- The PAI PMU driver returns -EINVAL if an event out of its range. That
aborts a search for an alternative PMU driver.
Instead, return -ENOENT to allow other PMUs to be tried
* tag 's390-6.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpum_cf: Deny all sampling events by counter PMU
s390/pai: Deny all events not handled by this PMU
s390/mm: Prevent possible preempt_count overflow
|
|
Repeatedly marking the same eraseblock bad inflates
mtd->ecc_stats.badblocks because mtd_block_markbad() unconditionally
increments the counter on success, while some implementations (e.g.
NAND) return 0 both when the block was already bad and when it has just
been marked[1].
Fix by checking if the block is already bad before calling
->_block_markbad() when _block_isbad is available. Only skip the counter
increment when we can confirm the block was already bad. In all other
cases continue incrementing the counter.
This keeps the logic centralized in mtdcore without requiring driver
changes.
Link: https://lore.kernel.org/all/ef573188-9815-4a6b-bad1-3d8ff7c9b16f@huaweicloud.com/ [1]
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Remove array_size() calls and replace vmalloc(array_size()) with
vmalloc_array() and vzalloc(array_size()) with vcalloc() to simplify
the code.
Compile-tested only.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Add two new debugfs files which allows to determine the OOB layout
used by a given MTD device. This can be useful to verify the current
layout during driver development without adding extra debug code.
The exposed information also makes it easier to analyze NAND dumps
without the need of crawling out the layout from the driver code.
The content of the new debugfs files is similar to this:
# cat /sys/kernel/debug/mtd/mtd0/ooblayout_ecc
0 0 49
1 65 63
# cat /sys/kernel/debug/mtd/mtd0/ooblayout_free
0 49 16
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
There is an extraneous space before a newline in a handful of printk
messages. Remove the spaces.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
There is a extraneous space before a newline in a pr_debug message.
Remove the space and remove a space after ( and before literal string
to clean up checkpatch warning.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The mb() macro is used in this header:
In file included from include/linux/mtd/qinfo.h:5,
from include/linux/mtd/pfow.h:8,
from drivers/mtd/lpddr/lpddr_cmds.c:14:
include/linux/mtd/map.h: In function 'inline_map_write':
include/linux/mtd/map.h:428:9: error: implicit declaration of function 'mb' [-Wimplicit-function-declaration]
Fixes: 56eb7c13b97c ("mtd: map: Don't use "proxy" headers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Tegra264 has 17 generic I2C controllers, two of which are in always-on
partition of the SoC. In addition to the features supported by Tegra194
it also supports a SW mutex register to allow sharing the same I2C
instance across multiple firmware.
Document compatible string "nvidia,tegra264-i2c" for Tegra264 I2C.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Use devm_mutex_init() instead of hand-writing it.
This saves some LoC, improves readability and saves some space in the
generated .o file.
Before:
======
text data bss dec hex filename
20011 6752 128 26891 690b drivers/leds/leds-is31fl319x.o
After:
=====
text data bss dec hex filename
19715 6680 128 26523 679b drivers/leds/leds-is31fl319x.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/267aba6eab12be67c297fcd52fcf45a0856338bb.1757240150.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a nasty hibernation regression introduced during the 6.16
cycle, an issue related to energy model management occurring on Intel
hybrid systems where some CPUs are offline to start with, and two
regressions in the amd-pstate driver:
- Restore a pm_restrict_gfp_mask() call in hibernation_snapshot()
that was removed incorrectly during the 6.16 development cycle
(Rafael Wysocki)
- Introduce a function for registering a perf domain without
triggering a system-wide CPU capacity update and make the
intel_pstate driver use it to avoid reocurring unsuccessful
attempts to update capacities of all CPUs in the system (Rafael
Wysocki)
- Fix setting of CPPC.min_perf in the active mode with performance
governor in the amd-pstate driver to restore its expected behavior
changed recently (Gautham Shenoy)
- Avoid mistakenly setting EPP to 0 in the amd-pstate driver after
system resume as a result of recent code changes (Mario
Limonciello)"
* tag 'pm-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Restrict GFP mask in hibernation_snapshot()
PM: EM: Add function for registering a PD without capacity update
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after resume
cpufreq/amd-pstate: Fix setting of CPPC.min_perf in active mode for performance governor
|
|
After a recent change that started using FIELD_GET() in tps6594-core.c,
there is an error when bitfield.h is not implicitly included, such as
when building allmodconfig for ARCH=hexagon:
drivers/mfd/tps6594-core.c:767:7: error: call to undeclared function 'FIELD_GET'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
767 | if (FIELD_GET(TPS65224_MASK_EN_PB_VSENSE_CONFIG, pwr_on) == TPS65224_EN_SEL_PB ||
| ^
Explicitly include bitfield.h to resolve the errors.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: d766ca01c208 ("mfd: tps6594: Add power button functionality")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Closes: https://lore.kernel.org/oe-kbuild-all/202509032356.LGa5hygM-lkp@intel.com/
Link: https://lore.kernel.org/r/20250904-mfd-tps6594-core-fix-bitfield-h-v1-1-5d0f00cfe58f@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix delayed inode tracking in xarray, eviction can race with
insertion and leave behind a disconnected inode
- on systems with large page (64K) and small block size (4K) fix
compression read that can return partially filled folio
- slightly relax compression option format for backward compatibility,
allow to specify level for LZO although there's only one
- fix simple quota accounting of compressed extents
- validate minimum device size in 'device add'
- update maintainers' entry
* tag 'for-6.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't allow adding block device of less than 1 MB
MAINTAINERS: update btrfs entry
btrfs: fix subvolume deletion lockup caused by inodes xarray race
btrfs: fix corruption reading compressed range when block size is smaller than page size
btrfs: accept and ignore compression level for lzo
btrfs: fix squota compressed stats leak
|
|
Rectify the reference of i915 to Xe in a comment.
v2: Cosmetic changes. (Karthik)
v3: Rephrased the commit message. (Karthik)
Signed-off-by: Varun Gupta <varun.gupta@intel.com>
Reviewed-by: Karthik Poosa <karthik.poosa@intel.com>
Link: https://lore.kernel.org/r/20250911111712.811524-1-varun.gupta@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Add support for the boost regulator found in the Texas Instruments
BQ25703. The boost regulator is capable of outputting between 4.48
and 20.8 volts and between 0 and 6.35 amps.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250904160530.66178-5-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Currently, x86, Riscv and Loongarch use the generic entry code, which
makes maintainer's work easier and code more elegant. Start converting
arm64 to use the generic entry infrastructure from kernel/entry/* by
switching it to generic IRQ entry, which removes 100+ lines of duplicate
code. arm64 will completely switch to generic entry in a later series.
The changes are below:
- Remove *enter_from/exit_to_kernel_mode(), and wrap with generic
irqentry_enter/exit() as their code and functionality are almost
identical.
- Define ARCH_EXIT_TO_USER_MODE_WORK and implement
arch_exit_to_user_mode_work() to check arm64-specific thread flags
"_TIF_MTE_ASYNC_FAULT" and "_TIF_FOREIGN_FPSTATE".
So also remove *enter_from/exit_to_user_mode(), and wrap with
generic enter_from/exit_to_user_mode() because they are
exactly the same.
- Remove arm64_enter/exit_nmi() and use generic irqentry_nmi_enter/exit()
because they're exactly the same, so the temporary arm64 version
irqentry_state can also be removed.
- Remove PREEMPT_DYNAMIC code, as generic irqentry_exit_cond_resched()
has the same functionality.
- Implement arch_irqentry_exit_need_resched() with
arm64_preempt_schedule_irq() for arm64 which will allow arm64 to do
its architecture specific checks.
Tested-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Suggested-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The arm64 entry code only preempts a kernel context upon a return from
a regular IRQ exception. The generic entry code may preempt a kernel
context for any exception return where irqentry_exit() is used, and so
may preempt other exceptions such as faults.
In preparation for moving arm64 over to the generic entry code, align
arm64 with the generic behaviour by calling
arm64_preempt_schedule_irq() from exit_to_kernel_mode(). To make this
possible, arm64_preempt_schedule_irq()
and dynamic/raw_irqentry_exit_cond_resched() are moved earlier in
the file, with no changes.
As Mark pointed out, this change will have the following 2 key impact:
- " We'll preempt even without taking a "real" interrupt. That
shouldn't result in preemption that wasn't possible before,
but it does change the probability of preempting at certain points,
and might have a performance impact, so probably warrants a
benchmark."
- " We will not preempt when taking interrupts from a region of kernel
code where IRQs are enabled but RCU is not watching, matching the
behaviour of the generic entry code.
This has the potential to introduce livelock if we can ever have a
screaming interrupt in such a region, so we'll need to go figure out
whether that's actually a problem.
Having this as a separate patch will make it easier to test/bisect
for that specifically."
Reviewed-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
To align the structure of the code with irqentry_exit_cond_resched()
from the generic entry code, hoist the need_irq_preemption()
and IS_ENABLED() check earlier. And different preemption check functions
are defined based on whether dynamic preemption is enabled.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Compared to the generic entry code, ARM64 does additional checks
when deciding to reschedule on return from interrupt. So introduce
arch_irqentry_exit_need_resched() in the need_resched()
condition of the generic raw_irqentry_exit_cond_resched(), with
a NOP default. This will allow ARM64 to implement the architecture
specific version for switching over to the generic entry code.
Suggested-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Suggested-by: Kevin Brodsky <kevin.brodsky@arm.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The generic entry code uses preempt_count() and need_resched() helpers to
check if it should do preempt_schedule_irq(). Currently, arm64 use its own
check logic, that is "READ_ONCE(current_thread_info()->preempt_count == 0",
which is equivalent to "preempt_count() == 0 && need_resched()".
In preparation for moving arm64 over to the generic entry code, use
these helpers to replace arm64's own code and move it ahead.
No functional changes.
Reviewed-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The generic entry code has the form:
| raw_irqentry_exit_cond_resched()
| {
| if (!preempt_count()) {
| ...
| if (need_resched())
| preempt_schedule_irq();
| }
| }
In preparation for moving arm64 over to the generic entry code, align
the structure of the arm64 code with raw_irqentry_exit_cond_resched() from
the generic entry code.
Reviewed-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The generic entry code uses irqentry_state_t to track lockdep and RCU
state across exception entry and return. For historical reasons, arm64
embeds similar fields within its pt_regs structure.
In preparation for moving arm64 over to the generic entry code, pull
these fields out of arm64's pt_regs, and use a separate structure,
matching the style of the generic entry code.
No functional changes.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The generic entry code expects architecture code to provide
regs_irqs_disabled(regs) function, but arm64 does not have this and
provides interrupts_enabled(regs), which has the opposite polarity.
In preparation for moving arm64 over to the generic entry code,
relace arm64's interrupts_enabled() with regs_irqs_disabled() and
update its callers under arch/arm64.
For the moment, a definition of interrupts_enabled() is provided for
the GICv3 driver. Once arch/arm implement regs_irqs_disabled(), this
can be removed.
Delete the fast_interrupts_enabled() macro as it is unused and we
don't want any new users to show up.
No functional changes.
Reviewed-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add support for the charger function of the BQ257XX. The device is
capable of charging batteries with a layout of 1 to 4 cells in
series.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250904160530.66178-4-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The Texas Instruments BQ25703A is an integrated charger manager and
boost converter.
The MFD driver initializes the device for the regulator driver
and power supply driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250904160530.66178-3-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Document the Texas instruments BQ25703A series of charger managers/
buck/boost regulators.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250904160530.66178-2-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
