| Age | Commit message (Collapse) | Author |
|---|
|
Correct typos in ipv6/udp.c comments:
"execeeds" -> "exceeds"
"tacking care" -> "taking care"
"measureable" -> "measurable"
No functional changes.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250909122611.3711859-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Xin Zhao says:
====================
net: af_packet: optimize retire operation
In a system with high real-time requirements, the timeout mechanism of
ordinary timers with jiffies granularity is insufficient to meet the
demands for real-time performance. Meanwhile, the optimization of CPU
usage with af_packet is quite significant. Use hrtimer instead of timer
to help compensate for the shortcomings in real-time performance.
In HZ=100 or HZ=250 system, the update of TP_STATUS_USER is not real-time
enough, with fluctuations reaching over 8ms (on a system with HZ=250).
This is unacceptable in some high real-time systems that require timely
processing of network packets. By replacing it with hrtimer, if a timeout
of 2ms is set, the update of TP_STATUS_USER can be stabilized to within
3 ms.
====================
Link: https://patch.msgid.link/20250908104549.204412-1-jackzxcui1989@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a system with high real-time requirements, the timeout mechanism of
ordinary timers with jiffies granularity is insufficient to meet the
demands for real-time performance. Meanwhile, the optimization of CPU
usage with af_packet is quite significant. Use hrtimer instead of timer
to help compensate for the shortcomings in real-time performance.
In HZ=100 or HZ=250 system, the update of TP_STATUS_USER is not real-time
enough, with fluctuations reaching over 8ms (on a system with HZ=250).
This is unacceptable in some high real-time systems that require timely
processing of network packets. By replacing it with hrtimer, if a timeout
of 2ms is set, the update of TP_STATUS_USER can be stabilized to within
3 ms.
Delete delete_blk_timer field, because hrtimer_cancel will check and wait
until the timer callback return and ensure never enter callback again.
Simplify the logic related to setting timeout, only update the hrtimer
expire time within the hrtimer callback, no longer update the expire time
in prb_open_block which is called by tpacket_rcv or timer callback.
Reasons why NOT update hrtimer in prb_open_block:
1) It will increase complexity to distinguish the two caller scenario.
2) hrtimer_cancel and hrtimer_start need to be called if you want to update
TMO of an already enqueued hrtimer, leading to complex shutdown logic.
One side effect of NOT update hrtimer when called by tpacket_rcv is that
a newly opened block triggered by tpacket_rcv may be retired earlier than
expected. On the other hand, if timeout is updated in prb_open_block, the
frequent reception of network packets that leads to prb_open_block being
called may cause hrtimer to be removed and enqueued repeatedly.
The retire hrtimer expiration is unconditional and periodic. If there are
numerous packet sockets on the system, please set an appropriate timeout
to avoid frequent enqueueing of hrtimers.
Reviewed-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/all/20250831100822.1238795-1-jackzxcui1989@163.com/
Signed-off-by: Xin Zhao <jackzxcui1989@163.com>
Link: https://patch.msgid.link/20250908104549.204412-3-jackzxcui1989@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kactive_blk_num (K) is only incremented on block close.
In timer callback prb_retire_rx_blk_timer_expired, except delete_blk_timer
is true, last_kactive_blk_num (L) is set to match kactive_blk_num (K) in
all cases. L is also set to match K in prb_open_block.
The only case K not equal to L is when scheduled by tpacket_rcv
and K is just incremented on block close but no new block could be opened,
so that it does not call prb_open_block in prb_dispatch_next_block.
This patch modifies the prb_retire_rx_blk_timer_expired function by simply
removing the check for L == K. This patch just provides another checkpoint
to thaw the might-be-frozen block in any case. It doesn't have any effect
because __packet_lookup_frame_in_block() has the same logic and does it
again without this patch when detecting the ring is frozen. The patch only
advances checking the status of the ring.
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/all/20250831100822.1238795-1-jackzxcui1989@163.com/
Signed-off-by: Xin Zhao <jackzxcui1989@163.com>
Link: https://patch.msgid.link/20250908104549.204412-2-jackzxcui1989@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the APM XGene MDIO bus binding to DT schema format. It's a
straight-forward conversion.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250908231016.2070305-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the APM XGene Ethernet binding to DT schema format.
Add the missing apm,xgene2-sgenet and apm,xgene2-xgenet compatibles.
Drop "reg-names" as required. Add support for up to 16 interrupts.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250908231016.2070305-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Niklas Söderlund says:
====================
net: ethernet: renesas: rcar_gen4_ptp: Simplify register layout
The daughter driver rcar_gen4_ptp used by both rswitch and rtsn where
upstreamed with support for possible different memory layouts on
different users. With all Gen4 boards upstream no such setup is
documented.
There are other issues related to how the rcar_gen4_ptp driver is shared
between multiple useres that needs to be cleaned up. But that will be a
larger work. So before that get some simple fixes done.
Patch 1/3 and 2/3 removes the support to allow different register
layouts on different SoCs by looking up offsets at runtime with a much
simpler interface. The new interface computes the offsets at compile
time.
While patch 3/3 is a drive-by patch taking a spurs comment and making a
lockdep check of it.
There is no intentional functional change in this series just cleaning
up in preparation of larger works to follow.
====================
Link: https://patch.msgid.link/20250908154426.3062861-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of a having a comment that the lock must be held when calling
the internal helper add a lockdep check to enforce it.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250908154426.3062861-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the support for multiple register layout removed all support
structures can be removed from the header file. Covert to a simpler
structure using defines for the register offsets.
There is no functional change, only switching from looking up offsets at
runtime to compile time.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250908154426.3062861-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When upstreaming the Gen4 PTP support for R-Car S4 the possibility for
different memory layouts on other Gen4 SoCs was build in. It turns out
this is not needed and instead needlessly makes the driver harder to
read, remove the support code that would have allowed different memory
layouts.
This change only deals with the public functions used by other drivers,
follow up work will clean up the rcar_gen4_ptp internals.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250908154426.3062861-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When 8139too is probing and 8139TOO_PIO=y it will call pci_iomap_range()
and from there __pci_ioport_map() for the PCI IO space.
If HAS_IOPORT_MAP=n and NO_GENERIC_PCI_IOPORT_MAP=n, like it is on my
m68k config, __pci_ioport_map() becomes NULL, pci_iomap_range() will
always fail and the driver will complain it couldn't map the PIO space
and return an error.
NO_IOPORT_MAP seems to cover the case where what 8139too is trying
to do cannot ever work so make 8139TOO_PIO depend on being it false
and avoid creating an unusable driver.
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Link: https://patch.msgid.link/20250907064349.3427600-1-daniel@thingy.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Because mlx5e_link_info and mlx5e_ext_link_info have holes
e.g. Azure mlx5 reports PTYS 19. Do not return it unless speed
is retrieved successfully.
Fixes: 65a5d35571849 ("net/mlx5: Refactor link speed handling with mlx5_link_info struct")
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Li Tian <litian@redhat.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250910003732.5973-1-litian@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the sleep in kill_procs with slowwait.
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250910025828.38900-2-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Constrained test environment; duplicate address detection is not needed
and causes races so disable it.
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250910025828.38900-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
napi_stop_kthread waits for the NAPI_STATE_SCHED_THREADED to be unset
before stopping the kthread. But it uses test_bit with the
NAPIF_STATE_SCHED_THREADED and that might stop the kthread early before
the flag is unset.
Use the NAPI_* variant of the NAPI state bits in test_bit instead.
Tested:
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
./tools/testing/selftests/drivers/net/napi_threaded.py
TAP version 13
1..2
ok 1 napi_threaded.change_num_queues
ok 2 napi_threaded.enable_dev_threaded_disable_napi_threaded
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: 689883de94dd ("net: stop napi kthreads when THREADED napi is disabled")
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250910203716.1016546-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Plenty of things going on, notably:
- iwlwifi: major cleanups/rework
- brcmfmac: gets AP isolation support
- mac80211: gets more S1G support
* tag 'wireless-next-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (94 commits)
wifi: mwifiex: fix endianness handling in mwifiex_send_rgpower_table
wifi: cfg80211: Remove the redundant wiphy_dev
wifi: mac80211: fix incorrect comment
wifi: cfg80211: update the time stamps in hidden ssid
wifi: mac80211: Fix HE capabilities element check
wifi: mac80211: add tx_handlers_drop statistics to ethtool
wifi: mac80211: fix reporting of all valid links in sta_set_sinfo()
wifi: iwlwifi: mld: CHANNEL_SURVEY_NOTIF is always supported
wifi: iwlwifi: mld: remove support of iwl_esr_mode_notif version 1
wifi: iwlwifi: mld: remove support from of sta cmd version 1
wifi: iwlwifi: mld: remove support of roc cmd version 5
wifi: iwlwifi: mld: remove support of mac cmd ver 2
wifi: iwlwifi: mld: don't consider phy cmd version 5
wifi: iwlwifi: implement wowlan status notification API update
wifi: iwlwifi: fw: Add ASUS to PPAG and TAS list
wifi: iwlwifi: add kunit tests for nvm parse
wifi: iwlwifi: api: add a flag to iwl_link_ctx_modify_flags
wifi: iwlwifi: pcie: move ltr_enabled to the specific transport
wifi: iwlwifi: pcie: move pm_support to the specific transport
wifi: iwlwifi: rename iwl_finish_nic_init
...
====================
Link: https://patch.msgid.link/20250911100854.20445-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc6).
Conflicts:
net/netfilter/nft_set_pipapo.c
net/netfilter/nft_set_pipapo_avx2.c
c4eaca2e1052 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
84c1da7b38d9 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too")
Only trivial adjacent changes (in a doc and a Makefile).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove stubs for fixed_phy_set_link_update() and
fixed_phy_change_carrier() because all callers
(actually just one per function) select config
symbol FIXED_PHY.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/8729170d-cf39-48d9-aabc-c9aa4acda070@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Xianwei Zhao <xianwei.zhao@amlogic.com>:
This Flash Controller is derived by adding an SPI path to the original
raw NAND controller. This controller supports two modes: raw mode and
SPI mode. The raw mode has already been implemented in the community
(drivers/mtd/nand/raw/meson_nand.c).
This submission supports the SPI mode.
Add the drivers and bindings corresponding to the SPI Flash Controller.
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Don't touch survivability_mode on fini (Michal)
- Fixes around eviction and suspend (Thomas)
- Extend Wa_13011645652 to PTL-H, WCL (Julia)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aMLq7QlaEPHGKXKX@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"SPI NAND fix:
- Wrong OOB layout for Winbond W25N01JW SPI NAND devices
Raw NAND fixes:
- Atmel raw NAND controller timings
- Buffer handling in stm32_fmc2 driver
- Error handling in Nuvoton's driver
MTD devices fixes:
- Wrong depends-on dependencies on the Intel DRM driver
* tag 'mtd/fixes-for-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spinand: winbond: Fix oob_layout for W25N01JW
mtd: nand: raw: atmel: Respect tAR, tCLR in read setup timing
mtd: rawnand: stm32_fmc2: fix ECC overwrite
mtd: rawnand: stm32_fmc2: avoid overlapping mappings on ECC buffer
mtd: rawnand: nuvoton: Fix an error handling path in ma35_nand_chips_init()
mtd: MTD_INTEL_DG should depend on DRM_I915 or DRM_XE
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A maintainer update, an out-of-bound check for panthor and a revert for
nouveau to fix a race.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250911-glistening-uakari-of-serendipity-06ceb1@houat
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes - 20250910
1. fix potential OF node use-after-free
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20250910231813.3526-1-chunkuang.hu@kernel.org
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.17-2025-09-10:
amdgpu:
- PSP 11.x fix
- DPCD quirk handing fix
- DCN 3.5 PG fix
- Audio suspend fix
- OEM i2c clean up fix
- Module unload memory leak fix
- DC delay fix
- ISP firmware fix
- VCN fixes
amdkfd:
- P2P topology fix
- APU mem limit calculation fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250910162855.2507853-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix size for for_each_set_bit() in abox iteration [display] (Jani Nikula)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://lore.kernel.org/r/aMFUtRdJ46qK-EXl@linux
|
|
https://gitlab.freedesktop.org/drm/rust/kernel into drm-fixes
- Add drm-rust tree to MAINTAINERS
- Require CONFIG_64BIT for Nova
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/aLquN1YvdyI_6PJS@google.com
|
|
The kzalloc(GFP_KERNEL) may return NULL, so all accesses to aer_info->xxx
will result in kernel panic. Fix it.
Signed-off-by: Vernon Yang <yanglincheng@kylinos.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250904182527.67371-1-vernon2gm@gmail.com
|
|
The bm_work work item should be scheduled after holding fw_card reference
counting. At a commit 25feb1a96e21 ("firewire: core: use cleanup function
in bm_work"), I misinterpreted it as fw_card spinlock and inserted
lockdep_assert_hold() wrongly.
This commit removes the useless line.
Fixes: 25feb1a96e21 ("firewire: core: use cleanup function in bm_work")
Link: https://lore.kernel.org/r/20250911221312.678076-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
In case peer-to-peer transaction traverses through host bridge,
the IOMMU needs to have IOMMU_MMIO flag, together with skip of
CPU sync.
The latter was handled by provided DMA_ATTR_SKIP_CPU_SYNC flag,
but IOMMU flag was missed, due to assumption that such memory
can be treated as regular one.
Reuse newly introduced DMA attribute to properly take MMIO path.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/998251caf3f9d1a3f6f8205f1f494c707fb4d8fa.1757423202.git.leonro@nvidia.com
|
|
Convert HMM DMA operations from the legacy page-based API to the new
physical address-based dma_map_phys() and dma_unmap_phys() functions.
This demonstrates the preferred approach for new code that should use
physical addresses directly rather than page+offset parameters.
The change replaces dma_map_page() and dma_unmap_page() calls with
dma_map_phys() and dma_unmap_phys() respectively, using the physical
address that was already available in the code. This eliminates the
redundant page-to-physical address conversion and aligns with the
DMA subsystem's move toward physical address-centric interfaces.
This serves as an example of how new code should be written to leverage
the more efficient physical address API, which provides cleaner interfaces
for drivers that already have access to physical addresses.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/d45207f195b8f77d23cc2d571c83197328a86b04.1757423202.git.leonro@nvidia.com
|
|
Introduce new DMA mapping functions dma_map_phys() and dma_unmap_phys()
that operate directly on physical addresses instead of page+offset
parameters. This provides a more efficient interface for drivers that
already have physical addresses available.
The new functions are implemented as the primary mapping layer, with
the existing dma_map_page_attrs()/dma_map_resource() and
dma_unmap_page_attrs()/dma_unmap_resource() functions converted to simple
wrappers around the phys-based implementations.
In case dma_map_page_attrs(), the struct page is converted to physical
address with help of page_to_phys() function and dma_map_resource()
provides physical address as is together with addition of DMA_ATTR_MMIO
attribute.
The old page-based API is preserved in mapping.c to ensure that existing
code won't be affected by changing EXPORT_SYMBOL to EXPORT_SYMBOL_GPL
variant for dma_*map_phys().
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/54cc52af91777906bbe4a386113437ba0bcfba9c.1757423202.git.leonro@nvidia.com
|
|
General dma_direct_map_resource() is going to be removed
in next patch, so simply open-code it in xen driver.
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/e9c66a92e818f416875441b6711963f9782dbbeb.1757423202.git.leonro@nvidia.com
|
|
Make dma_map_page_attrs() and dma_map_page_attrs() respect
DMA_ATTR_MMIO.
DMA_ATR_MMIO makes the functions behave the same as
dma_(un)map_resource():
- No swiotlb is possible
- Legacy dma_ops arches use ops->map_resource()
- No kmsan
- No arch_dma_map_phys_direct()
The prior patches have made the internal functions called here
support DMA_ATTR_MMIO.
This is also preparation for turning dma_map_resource() into an inline
calling dma_map_phys(DMA_ATTR_MMIO) to consolidate the flows.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/3660e2c78ea409d6c483a215858fb3af52cd0ed3.1757423202.git.leonro@nvidia.com
|
|
Convert the KMSAN DMA handling function from page-based to physical
address-based interface.
The refactoring renames kmsan_handle_dma() parameters from accepting
(struct page *page, size_t offset, size_t size) to (phys_addr_t phys,
size_t size). The existing semantics where callers are expected to
provide only kmap memory is continued here.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/3557cbaf66e935bc794f37d2b891ef75cbf2c80c.1757423202.git.leonro@nvidia.com
|
|
Convert the DMA direct mapping functions to accept physical addresses
directly instead of page+offset parameters. The functions were already
operating on physical addresses internally, so this change eliminates
the redundant page-to-physical conversion at the API boundary.
The functions dma_direct_map_page() and dma_direct_unmap_page() are
renamed to dma_direct_map_phys() and dma_direct_unmap_phys() respectively,
with their calling convention changed from (struct page *page,
unsigned long offset) to (phys_addr_t phys).
Architecture-specific functions arch_dma_map_page_direct() and
arch_dma_unmap_page_direct() are similarly renamed to
arch_dma_map_phys_direct() and arch_dma_unmap_phys_direct().
The is_pci_p2pdma_page() checks are replaced with DMA_ATTR_MMIO checks
to allow integration with dma_direct_map_resource and dma_direct_map_phys()
is extended to support MMIO path either.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/bb15a22f76dc2e26683333ff54e789606cfbfcf0.1757423202.git.leonro@nvidia.com
|
|
Make iommu_dma_map_phys() and iommu_dma_unmap_phys() respect
DMA_ATTR_MMIO.
DMA_ATTR_MMIO makes the functions behave the same as
iommu_dma_(un)map_resource():
- No swiotlb is possible
- No cache flushing is done (ATTR_MMIO should not be cached memory)
- prot for iommu_map() has IOMMU_MMIO not IOMMU_CACHE
This is preparation for replacing iommu_dma_map_resource() callers
with iommu_dma_map_phys(DMA_ATTR_MMIO) and removing
iommu_dma_(un)map_resource().
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/acc255bee358fec9c7da6b2a5904ee50abcd09f1.1757423202.git.leonro@nvidia.com
|
|
Rename the IOMMU DMA mapping functions to better reflect their actual
calling convention. The functions iommu_dma_map_page() and
iommu_dma_unmap_page() are renamed to iommu_dma_map_phys() and
iommu_dma_unmap_phys() respectively, as they already operate on physical
addresses rather than page structures.
The calling convention changes from accepting (struct page *page,
unsigned long offset) to (phys_addr_t phys), which eliminates the need
for page-to-physical address conversion within the functions. This
renaming prepares for the broader DMA API conversion from page-based
to physical address-based mapping throughout the kernel.
All callers are updated to pass physical addresses directly, including
dma_map_page_attrs(), scatterlist mapping functions, and DMA page
allocation helpers. The change simplifies the code by removing the
page_to_phys() + offset calculation that was previously done inside
the IOMMU functions.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/ed172f95f8f57782beae04f782813366894e98df.1757423202.git.leonro@nvidia.com
|
|
As a preparation for following map_page -> map_phys API conversion,
let's rename trace_dma_*map_page() to be trace_dma_*map_phys().
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/c0c02d7d8bd4a148072d283353ba227516a76682.1757423202.git.leonro@nvidia.com
|
|
Convert the DMA debug infrastructure from page-based to physical address-based
mapping as a preparation to rely on physical address for DMA mapping routines.
The refactoring renames debug_dma_map_page() to debug_dma_map_phys() and
changes its signature to accept a phys_addr_t parameter instead of struct page
and offset. Similarly, debug_dma_unmap_page() becomes debug_dma_unmap_phys().
A new dma_debug_phy type is introduced to distinguish physical address mappings
from other debug entry types. All callers throughout the codebase are updated
to pass physical addresses directly, eliminating the need for page-to-physical
conversion in the debug layer.
This refactoring eliminates the need to convert between page pointers and
physical addresses in the debug layer, making the code more efficient and
consistent with the DMA mapping API's physical address focus.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
[mszyprow: added a fixup]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/56d1a6769b68dfcbf8b26a75a7329aeb8e3c3b6a.1757423202.git.leonro@nvidia.com
Link: https://lore.kernel.org/all/20250910052618.GH341237@unreal/
|
|
This will replace the hacky use of DMA_ATTR_SKIP_CPU_SYNC to avoid
touching the possibly non-KVA MMIO memory.
Also correct the incorrect caching attribute for the IOMMU, MMIO
memory should not be cachable inside the IOMMU mapping or it can
possibly create system problems. Set IOMMU_MMIO for DMA_ATTR_MMIO.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/17ba63991aeaf8a80d5aca9ba5d028f1daa58f62.1757423202.git.leonro@nvidia.com
|
|
This patch introduces the DMA_ATTR_MMIO attribute to mark DMA buffers
that reside in memory-mapped I/O (MMIO) regions, such as device BARs
exposed through the host bridge, which are accessible for peer-to-peer
(P2P) DMA.
This attribute is especially useful for exporting device memory to other
devices for DMA without CPU involvement, and avoids unnecessary or
potentially detrimental CPU cache maintenance calls.
DMA_ATTR_MMIO is supposed to provide dma_map_resource() functionality
without need to call to special function and perform branching when
processing generic containers like bio_vec by the callers.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/6f058ec395c5348014860dbc2eed348c17975843.1757423202.git.leonro@nvidia.com
|
|
dma-mapping fix for Linux 6.17
- one more fix for DMA API debugging infrastructure (Baochen Qiang)
|
|
CONFIG_USB_EHCI_MSM was removed long time ago in v4.14-rc6
8b3f863033f9f ("usb: host: remove ehci-msm.c").
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250829165031.110850-1-petr.vorel@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All the other ref clocks provided by this driver have the bi_tcxo
as parent. The eDP refclk is the only one without a parent, leading
to reporting its rate as 0. So set its parent to bi_tcxo, just like
the rest of the refclks.
Cc: stable@vger.kernel.org # v6.9
Fixes: 06aff116199c ("clk: qcom: Add TCSR clock driver for x1e80100")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250730-clk-qcom-tcsrcc-x1e80100-parent-edp-refclk-v1-1-7a36ef06e045@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When SHM bridge is enabled, assigning RMTFS memory causes the calling
core to hang if the system is running in EL1.
Disable SHM bridge on sc7180 devices to avoid that hang.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-sc7180-shm-hang-v1-1-99ad9ffeb5b4@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
After initializing a field in an initializer macro, create a variable
holding a reference that points at that field. The type is either
`Pin<&mut T>` or `&mut T` depending on the field's structural pinning
kind.
[ Applied fixes to devres and rust_driver_pci sample - Benno]
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Benno Lossin <lossin@kernel.org>
|
|
Allow writing `_: { /* any number of statements */ }` in initializers to
run arbitrary code during initialization.
try_init!(MyStruct {
_: {
if check_something() {
return Err(MyError);
}
},
foo: Foo::new(val),
_: {
println!("successfully initialized `MyStruct`");
},
})
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Benno Lossin <lossin@kernel.org>
|
|
Make the `#[pin_data]` macro generate a `*Projection` struct that holds
either `Pin<&mut Field>` or `&mut Field` for every field of the original
struct. Which version is chosen depends on weather there is a `#[pin]`
or not respectively. Access to this projected version is enabled through
generating `fn project(self: Pin<&mut Self>) -> SelfProjection<'_>`.
[ Adapt workqueue to use the new projection instead of its own, custom
one - Benno ]
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Benno Lossin <lossin@kernel.org>
|
|
The next commit makes the `#[pin_data]` attribute generate a `project`
function that would collide with any existing ones.
Signed-off-by: Benno Lossin <lossin@kernel.org>
|
|
Signed-off-by: Benno Lossin <lossin@kernel.org>
|
