| Age | Commit message (Collapse) | Author |
|---|
|
Fix typo 'implementors' to 'implementers' in remote processor framework
documentation.
Signed-off-by: Taimoor Zaeem <taimoorzaeem@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <CANQcFN1s_iM8p5tYNz3Q_WyZki6Aw9_3HyoKwyoCVA9JeqG0eA@mail.gmail.com>
|
|
Commit 11502feab423 ("Documentation: PCI: Tidy AER documentation")
replaced the terms "PCI-E", "PCI-Express" and "PCI Express" with "PCIe"
in the AER documentation.
Do the same in the documentation on PCI error recovery. While at it,
add a missing period and a missing blank.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/db56b7ef12043f709a04ce67c1d1e102ab5f4e19.1757942121.git.lukas@wunner.de
|
|
Amend the documentation on PCI error recovery with specifics about
Downstream Port Containment and Advanced Error Reporting:
* Explain that with DPC, devices are inaccessible upon an error (similar
to EEH on powerpc) and do not become accessible until the link is
re-enabled.
* Explain that with AER, although devices may already be accessible in the
->error_detected() callback, accesses should be deferred to the
->mmio_enabled() callback for compatibility with EEH on powerpc and with
s390.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/61d8eeadb20ee71c3a852f44c863bfe0209c454d.1757942121.git.lukas@wunner.de
|
|
Amend the documentation on PCI error recovery to fix minor inaccuracies
vis-à-vis the actual code:
* The documentation claims that a missing ->resume() or ->mmio_enabled()
callback always leads to recovery through reset. But none of the
implementations do this (pcie_do_recovery(), eeh_handle_normal_event(),
zpci_event_do_error_state_clear()).
Drop the claim to align the documentation with the code.
* The documentation does not list PCI_ERS_RESULT_RECOVERED as a valid
return value from ->error_detected(). But none of the implementations
forbid this and some drivers are returning it, e.g.:
drivers/bus/mhi/host/pci_generic.c
drivers/infiniband/hw/hfi1/pcie.c
Further down in the documentation it is implied that the return value is
in fact allowed:
"The platform will call the resume() callback on all affected device
drivers if all drivers on the segment have returned
PCI_ERS_RESULT_RECOVERED from one of the 3 previous callbacks."
The "3 previous callbacks" being ->error_detected(), ->mmio_enabled()
and ->slot_reset().
Add it to the valid return values for consistency.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/ed3c3385499775fcc25f1ee66f395e212919f94a.1757942121.git.lukas@wunner.de
|
|
The PCIe Advanced Error Reporting driver has evolved over the years but
its documentation hasn't. Catch up with past code changes:
* The documentation claims that Correctable Errors are logged with
KERN_INFO severity, but the code uses KERN_WARN.
It had used KERN_WARN from the beginning with commit 6c2b374d7485
("PCI-Express AER implemetation: AER core and aerdriver"). In 2013,
commit 2cced2d95961 ("aerdrv: Cleanup log output for AER") switched to
KERN_ERR, until 2020 when it was reverted back to KERN_WARN by commit
e83e2ca3c395 ("PCI/AER: Log correctable errors as warning, not error").
* An example log message in the documentation uses the term "Uncorrected",
but the code uses "Uncorrectable" since commit 02a06f5f1a6a ("PCI/AER:
Use 'Correctable' and 'Uncorrectable' spec terms for errors").
* The example contains the Requester ID "id=0500", which is omitted since
commit 010caed4ccb6 ("PCI/AER: Decode Error Source Requester ID").
* The example contains the error name "Unsupported Request", which is
instead reported as "UnsupReq" since commit bd237801fef2 ("PCI/AER:
Adopt lspci names for AER error decoding").
* The example doesn't prepend "0x" to hex values from the TLP Header Log,
as introduced by commit f68ea779d98a ("PCI: Add pcie_print_tlp_log() to
print TLP Header and Prefix Log").
* The documentation refers to a reset_link callback which was removed by
commit b6cf1a42f916 ("PCI/ERR: Remove service dependency in
pcie_do_recovery()").
* Commit 579086225502 ("PCI/ERR: Recover from RCiEP AER errors") added
support to recover Root Complex Integrated Endpoints by applying a
Function Level Reset, alternatively to the Secondary Bus Reset which is
applied otherwise.
* On non-fatal errors, a reset was previously never performed. But the
AER driver has just been amended to allow drivers to opt in to a reset.
* The documentation claims that a warning message is logged if a driver
lacks pci_error_handlers. But the message has been informational
(logged with KERN_INFO severity) since its introduction with commit
01daacfb9035 ("PCI/AER: Log which device prevents error recovery").
The documentation claims that the message is only logged for fatal
errors, which is incorrect. Moreover it refers to "section 3", even
though the documentation no longer contains section numbers since commit
4e37f055a92e ("Documentation: PCI: convert pcieaer-howto.txt to reST").
Section 3 is titled "Developer Guide". That's the same section where
the reference is located, so it is self-referential and can be dropped.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/7501bfc5b9920193a25998a3cbcf72c47674ec63.1757942121.git.lukas@wunner.de
|
|
According to LP8556 datasheet EPROM region starts at 0x98 so adjust value
in the driver accordingly.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250909074304.92135-2-clamor95@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add 'name' argument to of_led_get() such that it can lookup LEDs in
devicetree by either name or index.
And use this modified function to add devicetree support to the generic
(non devicetree specific) [devm_]led_get() function.
This uses the standard devicetree pattern of adding a -names string array
to map names to the indexes for an array of resources.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Aleksandrs Vinarskis <alex@vinarskis.com>
Link: https://lore.kernel.org/r/20250910-leds-v5-3-bb90a0f897d5@vinarskis.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The xe_preempt_fence_create() function returns error pointers. It
never returns NULL. Update the error checking to match.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/aJTMBdX97cof_009@stanley.mountain
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 75cc23ffe5b422bc3cbd5cf0956b8b86e4b0e162)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Replace calls of devm_kzalloc() with devm_kcalloc() in led_bl_get_leds()
and led_bl_parse_levels() for safer memory allocation with built-in
overflow protection.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250819035804.433615-1-rongqianfeng@vivo.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The adi-axi-common header has been moved to the upper directory.
Acked-by: Jorge Marques <jorge.marques@analog.com>
Link: https://lore.kernel.org/r/20250519-dev-axi-clkgen-limits-v6-3-bc4b3b61d1d4@analog.com
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250916091252.39265-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add support for the RTC found in the SpacemiT P1 PMIC. Initially
only setting and reading the time are supported.
The PMIC is implemented as a multi-function device. This RTC is
probed based on this driver being named in a MFD cell in the simple
MFD I2C driver.
Signed-off-by: Alex Elder <elder@riscstar.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20250825172057.163883-5-elder@riscstar.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add read_alarm and set_alarm ops from the rtc framework.
The support of an alarm is handled by a kernel thread waiting in OP-TEE
for an asynchronous notification that comes in the interrupt
handler of the alarm interruption on OP-TEE secure world.
Once the notification arrives, the kernel thread previously suspended
is rescheduled (this is handled by the OP-TEE kernel driver) and comes
back with the alarm information to the kernel.
A second session is therefore needed to enable/disable/cancel a waiting
alarm event as the kernel thread stopped in OP-TEE takes a form of mutex
on the session and so no one can use this session in parallel.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250715-upstream-optee-rtc-v1-3-e0fdf8aae545@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Remove memcpy by using directly the shared memory.
Remove memset be initialize variable to 0 on stack.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250715-upstream-optee-rtc-v1-2-e0fdf8aae545@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Fix a memory leak in case of driver removal.
Free the shared memory used for arguments exchanges between kernel and
OP-TEE RTC PTA.
Fixes: 81c2f059ab90 ("rtc: optee: add RTC driver for OP-TEE RTC PTA")
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250715-upstream-optee-rtc-v1-1-e0fdf8aae545@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The vendor for the X1205 RTC is not Xircom, but Xicor which was acquired
by Intersil. Since the I2C subsystem drops the vendor prefix for driver
matching, the vendor prefix hasn't mattered.
Fixes: 6875404fdb44 ("rtc: x1205: Add DT probing support")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250821215703.869628-2-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The vendor for the Xircom X1205 RTC is not Xircom, but Xicor which was
acquired by Intersil.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250821215703.869628-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When using MMIO with regmap, fast_io is implied. No need to set it
again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250813161517.4746-18-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The "isil,isl12057" compatible is already supported by rtc-ds1307.yaml,
so remove the old text binding.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250807214414.4172910-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The EFI rtc driver is used by non-x86 architectures only, and exposes
the get/set wakeup time functionality provided by the underlying
platform. This is usually broken on most platforms, and not widely used
to begin with [if at all], so let's just remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Feng Tang <feng.tang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250714060843.4029171-6-ardb+git@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
PCF2127 can generate interrupt every full second or minute configured
from control and status register 1, bits MI (1) and SI (0).
On interrupt control register 2 bit MSF (7) is set and must be cleared
to continue normal operation.
While the driver never enables this interrupt on its own, users or
firmware may do so - e.g. as an easy way to test the interrupt.
Add preprocessor definition for MSF bit and include it in the irq
bitmask to ensure minute and second interrupts are cleared when fired.
This fixes an issue where the rtc enters a test mode and becomes
unresponsive after a second interrupt has fired and is not cleared in
time. In this state register writes to control registers have no
effect and the interrupt line is kept asserted [1]:
[1] userspace commands to put rtc into unresponsive state:
$ i2cget -f -y 2 0x51 0x00
0x04
$ i2cset -f -y 2 0x51 0x00 0x05 # set bit 0 SI
$ i2cget -f -y 2 0x51 0x00
0x84 # bit 8 EXT_TEST set
$ i2cset -f -y 2 0x51 0x00 0x05 # try overwrite control register
$ i2cget -f -y 2 0x51 0x00
0x84 # no change
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20250825-rtc-irq-v1-1-0133319406a7@solid-run.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Samsung S3C24xx family of SoCs was removed the Linux kernel in the
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support"), in January
2023. There are no in-kernel users of remaining S3C24xx compatibles.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250830130024.142815-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Samsung S3C24xx family of SoCs was removed the Linux kernel in the
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support"), in January
2023. There are no in-kernel users of remaining S3C24xx compatibles.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250830130024.142815-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Drop defines for S3C2416 and S3C2443 SoCs which are not used anywhere.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250830130024.142815-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add compatible string dallas,m41t00 for dallas m41t00 RTC.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250827193356.78368-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
nxp,pcf85063
Original TXT binding doc have not limitition about quartz-load-femtofarads,
which only allow 7000 for nxp,pcf85063.
So remove it to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt2.dtb: rtc@51 (nxp,pcf85063): quartz-load-femtofarads:0: 7000 was expected
from schema $id: http://devicetree.org/schemas/rtc/nxp,pcf85063.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250903191128.439164-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add changes to support the camera subsystem on the lemans.
Co-developed-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250814101615.1102795-10-quic_vikramsa@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for Qualcomm sensor low power island.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250912-starqltechn_slpi-v2-2-5ca5ddbbe7b4@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When adding adsp reserved mem, slpi reserved memory was shrunk
according to vendor kernel log:
`Removed memory: created DMA memory pool at 0x0000000096700000, size 15 M`
However, kernel failed to load firmware with 15MiB reserved region:
`[ 14.885885] qcom_q6v5_pas 5c00000.remoteproc: segment outside memory range`
Increase slpi reserved region to 16MiB.
Fixes: 58782c229e3e ("arm64: dts: qcom: sdm845-starqltechn: add initial sound support")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250912-starqltechn_slpi-v2-1-5ca5ddbbe7b4@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add new device support for the Samsung Galaxy S22 (SM-S901E) phone
What works:
- SimpleFB
- USB
Signed-off-by: Eric Gonçalves <ghatto404@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250912202603.7312-2-ghatto404@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Flatten usb controller nodes and update to using latest bindings and
flattened driver approach. Enumeration of ADB has been tested on EVK
Platform.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250913182318.3547789-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Asbjørn Sloth Tønnesen says:
====================
tools: ynl: prepare for wireguard
This series contains the last batch of YNL changes to support
the wireguard YNL conversion.
====================
Link: https://patch.msgid.link/20250915144301.725949-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The attribute WGALLOWEDIP_A_IPADDR can contain either an IPv4
or an IPv6 address depending on WGALLOWEDIP_A_FAMILY, however
in practice it is enough to look at the attribute length.
This patch implements an ipv4-or-v6 display hint, that can
deal with this kind of attribute.
It only implements this display hint for genetlink-legacy, it
can be added to other protocol variants if needed, but we don't
want to encourage it's use.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250915144301.725949-12-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds support for decoding hex input, so
that binary attributes can be read through --json.
Example (using future wireguard.yaml):
$ sudo ./tools/net/ynl/pyynl/cli.py --family wireguard \
--do set-device --json '{"ifindex":3,
"private-key":"2a ae 6c 35 c9 4f cf <... to 32 bytes>"}'
In order to somewhat mirror what is done in _formatted_string(),
then for non-binary attributes attempt to convert it to an int.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250915144301.725949-11-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds support for encoding indexed-array
attributes with sub-type nest in pyynl.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250915144301.725949-10-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch moves nest packing into a helper function,
that can also be used for packing indexed arrays.
No behavioural changes intended.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250915144301.725949-9-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since TypeArrayNest can now be used with many other sub-types
than nest, then rename it to TypeIndexedArray, to reduce
confusion.
This patch continues the rename, that was started in commit
aa6485d813ad ("ynl: rename array-nest to indexed-array"),
when the YNL type was renamed.
In order to get rid of all references to the old naming,
within ynl, then renaming some variables in _multi_parse().
This is a trivial patch with no behavioural changes intended.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250915144301.725949-8-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds Loongson-2K BMC IPMI support.
According to the existing design, we use software simulation to
implement the KCS interface registers: Stauts/Command/Data_Out/Data_In.
Also since both host side and BMC side read and write kcs status, fifo flag
is used to ensure data consistency.
The single KCS message block is as follows:
+-------------------------------------------------------------------------+
|FIFO flags| KCS register data | CMD data | KCS version | WR REQ | WR ACK |
+-------------------------------------------------------------------------+
Co-developed-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Acked-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Message-ID: <8f9ffb6f0405345af8f04193ce1510aacd075e72.1756987761.git.zhoubinbin@loongson.cn>
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
In nested arrays don't require that the intermediate attribute
type should be a valid attribute type, it might just be zero
or an incrementing index, it is often not even used.
See include/net/netlink.h about NLA_NESTED_ARRAY:
> The difference to NLA_NESTED is the structure:
> NLA_NESTED has the nested attributes directly inside
> while an array has the nested attributes at another
> level down and the attribute types directly in the
> nesting don't matter.
Example based on include/uapi/linux/wireguard.h:
> WGDEVICE_A_PEERS: NLA_NESTED
> 0: NLA_NESTED
> WGPEER_A_PUBLIC_KEY: NLA_EXACT_LEN, len WG_KEY_LEN
> [..]
> 0: NLA_NESTED
> ...
> ...
Previous the check required that the nested type was valid
in the parent attribute set, which in this case resolves to
WGDEVICE_A_UNSPEC, which is YNL_PT_REJECT, and it took the
early exit and returned YNL_PARSE_CB_ERROR.
This patch renames the old nl_attr_validate() to
__nl_attr_validate(), and creates a new inline function
nl_attr_validate() to mimic the old one.
The new __nl_attr_validate() takes the attribute type as an
argument, so we can use it to validate attributes of a
nested attribute, in the context of the parents attribute
type, which in the above case is generated as:
[WGDEVICE_A_PEERS] = {
.name = "peers",
.type = YNL_PT_NEST,
.nest = &wireguard_wgpeer_nest,
},
__nl_attr_validate() only checks if the attribute length
is plausible for a given attribute type, so the .nest in
the above example is not used.
As the new inline function needs to be defined after
ynl_attr_type(), then the definitions are moved down,
so we avoid a forward declaration of ynl_attr_type().
Some other examples are NL80211_BAND_ATTR_FREQS (nest) and
NL80211_ATTR_SUPPORTED_COMMANDS (u32) both in nl80211-user.c
$ make -C tools/net/ynl/generated nl80211-user.c
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250915144301.725949-7-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the generated attribute parsing code, avoid repetitively
defining the same variables over and over again, local to
the conditional block for each attribute.
This patch consolidates the definitions of local variables
for attribute parsing, so that they are defined at the
function level, and re-used across attributes, thus making
the generated code read more natural.
If attributes defines identical local_vars, then they will
be deduplicated, attributes are assumed to only use their
local variables transiently.
The example below shows how `len` was defined repeatedly in
tools/net/ynl/generated/nl80211-user.c:
nl80211_iftype_data_attrs_parse(..) {
[..]
ynl_attr_for_each_nested(attr, nested) {
unsigned int type = ynl_attr_type(attr);
if (type == NL80211_BAND_IFTYPE_ATTR_IFTYPES) {
unsigned int len;
[..]
} else if (type == NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC) {
unsigned int len;
[..]
[same pattern 8 times, so 11 times in total]
} else if (type == NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE) {
unsigned int len;
[..]
}
}
return 0;
}
This patch results in this diffstat for the generated code:
$ diff -Naur pre/ post/ | diffstat
devlink-user.c | 187 +++----------------
dpll-user.c | 10 -
ethtool-user.c | 49 +----
fou-user.c | 5
handshake-user.c | 3
mptcp_pm-user.c | 3
nfsd-user.c | 16 -
nl80211-user.c | 159 +---------------
nlctrl-user.c | 21 --
ovpn-user.c | 7
ovs_datapath-user.c | 9
ovs_flow-user.c | 89 ---------
ovs_vport-user.c | 7
rt-addr-user.c | 14 -
rt-link-user.c | 183 ++----------------
rt-neigh-user.c | 14 -
rt-route-user.c | 26 --
rt-rule-user.c | 11 -
tc-user.c | 380 +++++----------------------------------
tcp_metrics-user.c | 7
team-user.c | 5
21 files changed, 175 insertions(+), 1030 deletions(-)
The changed lines are mostly `unsigned int len;` definitions:
$ diff -Naur pre/ post/ | grep ^[-+] | grep -v '^[-+]\{3\}' |
grep -v '^.$' | sed -e 's/\t\+/ /g' | sort | uniq -c | sort -nr
488 - unsigned int len;
153 + unsigned int len;
24 - const struct nlattr *attr2;
18 + const struct nlattr *attr2;
1 - __u32 policy_id, attr_id;
1 + __u32 policy_id, attr_id;
1 - __u32 op_id;
1 + __u32 op_id;
1 - const struct nlattr *attr_policy_id, *attr_attr_id;
1 + const struct nlattr *attr_policy_id, *attr_attr_id;
1 - const struct nlattr *attr_op_id;
1 + const struct nlattr *attr_op_id;
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250915144301.725949-6-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor the generation of local variables needed when building
requests, by moving the logic from put_req_nested() into a new
helper put_local_vars(), and use the helper before .attr_put() is
called, thus generating the local variables assumed by .attr_put().
Previously only put_req_nested() generated the variables assumed
by .attr_put(), print_req() only generated the count iterator `i`,
and print_dump() neither generated `i` nor `array`.
This patch fixes the build errors below:
$ make -C tools/net/ynl/generated/
[...]
-e GEN wireguard-user.c
-e GEN wireguard-user.h
-e CC wireguard-user.o
wireguard-user.c: In function ‘wireguard_get_device_dump’:
wireguard-user.c:480:9: error: ‘array’ undeclared (first use in func)
480 | array = ynl_attr_nest_start(nlh, WGDEVICE_A_PEERS);
| ^~~~~
wireguard-user.c:480:9: note: each undeclared identifier is reported
only once for each function it appears in
wireguard-user.c:481:14: error: ‘i’ undeclared (first use in func)
481 | for (i = 0; i < req->_count.peers; i++)
| ^
wireguard-user.c: In function ‘wireguard_set_device’:
wireguard-user.c:533:9: error: ‘array’ undeclared (first use in func)
533 | array = ynl_attr_nest_start(nlh, WGDEVICE_A_PEERS);
| ^~~~~
make: *** [Makefile:52: wireguard-user.o] Error 1
make: Leaving directory '/usr/src/linux/tools/net/ynl/generated'
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250915144301.725949-5-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a check to verify that the sub-type is "nest", and throw an
exception if no policy could be generated, as a guard to prevent
against generating a bad policy.
This is a trivial patch with no behavioural changes intended.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250915144301.725949-4-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds support for NLA_POLICY_NESTED_ARRAY() policies.
Example spec (from future wireguard.yaml):
-
name: wgpeer
attributes:
-
name: allowedips
type: indexed-array
sub-type: nest
nested-attributes: wgallowedip
yields NLA_POLICY_NESTED_ARRAY(wireguard_wgallowedip_nl_policy).
This doesn't change any currently generated code, as it isn't
used in any specs currently used for generating code.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250915144301.725949-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow using custom name-prefix with constants,
just like it is for enum and flags declarations.
This is needed for generating WG_KEY_LEN in
include/uapi/linux/wireguard.h from a spec.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250915144301.725949-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
generated code
With indexed-array types such as "ops" from
Documentation/netlink/specs/nlctrl.yaml, the generator creates code
such as:
int nlctrl_getfamily_rsp_parse(const struct nlmsghdr *nlh,
struct ynl_parse_arg *yarg)
{
struct nlctrl_getfamily_rsp *dst;
const struct nlattr *attr_ops;
const struct nlattr *attr;
struct ynl_parse_arg parg;
unsigned int n_ops = 0;
int i;
...
ynl_attr_for_each(attr, nlh, yarg->ys->family->hdr_len) {
unsigned int type = ynl_attr_type(attr);
if (type == CTRL_ATTR_FAMILY_ID) {
...
} else if (type == CTRL_ATTR_OPS) {
const struct nlattr *attr2;
attr_ops = attr;
ynl_attr_for_each_nested(attr2, attr) {
if (ynl_attr_validate(yarg, attr2))
return YNL_PARSE_CB_ERROR;
n_ops++;
}
} else {
...
}
}
if (n_ops) {
dst->ops = calloc(n_ops, sizeof(*dst->ops));
dst->_count.ops = n_ops;
i = 0;
parg.rsp_policy = &nlctrl_op_attrs_nest;
ynl_attr_for_each_nested(attr, attr_ops) {
...
}
}
return YNL_PARSE_CB_OK;
}
It is clear that due to the sequential nature of code execution, when
n_ops (initially zero) is incremented, attr_ops is also assigned from
the value of "attr" (the current iterator).
But some compilers, like gcc version 12.2.0 (Debian 12.2.0-14+deb12u1)
as distributed by Debian Bookworm, seem to be not sophisticated enough
to see this, and fail to compile (warnings treated as errors):
In file included from ../lib/ynl.h:10,
from nlctrl-user.c:9:
In function ‘ynl_attr_data_end’,
inlined from ‘nlctrl_getfamily_rsp_parse’ at nlctrl-user.c:427:3:
../lib/ynl-priv.h:209:44: warning: ‘attr_ops’ may be used uninitialized [-Wmaybe-uninitialized]
209 | return (char *)ynl_attr_data(attr) + ynl_attr_data_len(attr);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
nlctrl-user.c: In function ‘nlctrl_getfamily_rsp_parse’:
nlctrl-user.c:341:30: note: ‘attr_ops’ was declared here
341 | const struct nlattr *attr_ops;
| ^~~~~~~~
It is a pity that we have to do this, but I see no other way than to
suppress the false positive by appeasing the compiler and initializing
the "*attr_{aspec.c_name}" variable with a bogus value (NULL). This will
never be used - at runtime it will always be overwritten when
"n_{struct[anest].c_name}" is non-zero.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250915144414.1185788-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add shutdown handler to the Synopsys DesignWare I3C master driver,
ensuring the device is gracefully disabled during system shutdown.
The shutdown handler cancels any pending hot-join work and disables
interrupts.
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Link: https://lore.kernel.org/r/20250730151207.4113708-1-manikanta.guntupalli@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
There was already a bail out for 'ret < 0', so we can always return
success at the end of the function.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/aIyzJ7HOENL1qp1l@stanley.mountain
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://lore.kernel.org/r/20250803211256.18513-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add device tree binding support for the I3C Bus Interface on Renesas
RZ/V2H(P) and RZ/V2N SoCs. The I3C IP on these SoCs is identical to
that found on the RZ/G3E SoC.
Add new compatible strings "renesas,r9a09g056-i3c" for RZ/V2N and
"renesas,r9a09g057-i3c" for RZ/V2H(P). Both variants use
"renesas,r9a09g047-i3c" as a fallback compatible to indicate hardware
compatibility with the RZ/G3E implementation.
Update the title to be more generic as it now covers multiple SoC
families beyond just RZ/G3S and RZ/G3E.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250908093930.12591-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
In svc_i3c_master_handle_ibi(), an IBI slot is fetched from the pool
to store the IBI payload. However, when an error condition is encountered,
the function returns without recycling the IBI slot, resulting in an IBI
slot leak.
Fixes: c85e209b799f ("i3c: master: svc: fix ibi may not return mandatory data byte")
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250829012309.3562585-3-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Driver wants to nack the IBI request when the target is not in the
known address list. In below code, svc_i3c_master_nack_ibi() will
cause undefined behavior when using AUTOIBI with auto response rule,
because hw always auto ack the IBI request.
switch (ibitype) {
case SVC_I3C_MSTATUS_IBITYPE_IBI:
dev = svc_i3c_master_dev_from_addr(master, ibiaddr);
if (!dev || !is_events_enabled(master, SVC_I3C_EVENT_IBI))
svc_i3c_master_nack_ibi(master);
...
break;
AutoIBI has another issue that the controller doesn't quit AutoIBI state
after IBIWON polling timeout when there is a SDA glitch(high->low->high).
1. SDA high->low: raising an interrupt to execute IBI ISR
2. SDA low->high
3. Driver writes an AutoIBI request
4. AutoIBI process does not start because SDA is not low
5. IBIWON polling times out
6. Controller reamins in AutoIBI state and doesn't accept EmitStop request
Emitting broadcast address with IBIRESP_MANUAL avoids both issues.
Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250829012309.3562585-2-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add support for Analog Devices I3C Controller IP, an AXI-interfaced IP
core that supports I3C and I2C devices, multiple speed-grades and
I3C IBIs.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Link: https://lore.kernel.org/r/20250827-adi-i3c-master-v9-2-04413925abe1@analog.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
