summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2026-01-28Merge tag 'scrub-syzbot-fixes-7.0_2026-01-25' of ↵Carlos Maiolino
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-7.0-merge xfs: syzbot fixes for online fsck [3/3] Fix various syzbot complaints about scrub that Jiaming Zhang found. With a bit of luck, this should all go splendidly. Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2026-01-28printf: convert test_hashed into macroTamir Duberstein
This allows the compiler to check the arguments against the __printf() attribute on __test(). This produces better diagnostics when incorrect inputs are passed. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202512061600.89CKQ3ag-lkp@intel.com/ Signed-off-by: Tamir Duberstein <tamird@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20260121-printf-kunit-printf-attr-v3-1-4144f337ec8b@kernel.org Signed-off-by: Petr Mladek <pmladek@suse.com>
2026-01-28Merge tag 'attr-pptr-speedup-7.0_2026-01-25' of ↵Carlos Maiolino
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-7.0-merge xfs: improve shortform attr performance [2/3] Improve performance of the xattr (and parent pointer) code when the attr structure is in short format and we can therefore perform all updates in a single transaction. Avoiding the attr intent code brings a very nice speedup in those operations. With a bit of luck, this should all go splendidly. Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2026-01-28Merge tag 'attr-leaf-freemap-fixes-7.0_2026-01-25' of ↵Carlos Maiolino
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-7.0-merge xfs: fix problems in the attr leaf freemap code [1/3] Running generic/753 for hours revealed data corruption problems in the attr leaf block space management code. Under certain circumstances, freemap entries are left with zero size but a nonzero offset. If that offset happens to be the same offset as the end of the entries array during an attr set operation, the leaf entry table expansion will push the freemap record offset upwards without checking for overlap with any other freemap entries. If there happened to be a second freemap entry overlapping with the newly allocated leaf entry space, then the next attr set operation might find that space and overwrite the leaf entry, thereby corrupting the leaf block. Fix this by zeroing the freemap offset any time we set the size to zero. If a subsequent attr set operation finds no space in the freemap, it will compact the block and regenerate the freemaps. With a bit of luck, this should all go splendidly. Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2026-01-28gpio: brcmstb: correct hwirq to bank mapDoug Berger
The brcmstb_gpio_hwirq_to_bank() function was designed to accommodate the downward numbering of dynamic GPIOs by traversing the bank list in the reverse order. However, the dynamic numbering has changed to increment upward which can produce an incorrect mapping. The function is modified to no longer assume an ordering of the list to accommodate either option. Fixes: 7b61212f2a07 ("gpiolib: Get rid of ARCH_NR_GPIOS") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Linus Walleij <linusw@kernel.org> Link: https://patch.msgid.link/20260127214656.447333-2-florian.fainelli@broadcom.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
2026-01-28gpio: max77620: Implement .get_direction() callbackDiogo Ivo
Add support for reporting the current GPIO line direction by implementing the .get_direction() callback for the MAX77620 GPIO controller. Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Reviewed-by: Linus Walleij <linusw@kernel.org> Link: https://patch.msgid.link/20260127-smaug-spi_flash-v1-1-5fd334415118@tecnico.ulisboa.pt Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
2026-01-28Merge tag 'health-monitoring-7.0_2026-01-20' of ↵Carlos Maiolino
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-7.0-merge xfs: autonomous self healing of filesystems [v7] This patchset builds new functionality to deliver live information about filesystem health events to userspace. This is done by creating an anonymous file that can be read() for events by userspace programs. Events are captured by hooking various parts of XFS and iomap so that metadata health failures, file I/O errors, and major changes in filesystem state (unmounts, shutdowns, etc.) can be observed by programs. When an event occurs, the hook functions queue an event object to each event anonfd for later processing. Programs must have CAP_SYS_ADMIN to open the anonfd and there's a maximum event lag to prevent resource overconsumption. The events themselves can be read() from the anonfd as C structs for the xfs_healer daemon. In userspace, we create a new daemon program that will read the event objects and initiate repairs automatically. This daemon is managed entirely by systemd and will not block unmounting of the filesystem unless repairs are ongoing. They are auto-started by a starter service that uses fanotify. This patchset depends on the new fserror code that Christian Brauner has tentatively accepted for Linux 7.0: https://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs.git/log/?h=vfs-7.0.fserror v7: more cleanups of the media verification ioctl, improve comments, and reuse the bio v6: fix pi-breaking bugs, make verify failures trigger health reports and filter bio status flags better v5: add verify-media ioctl, collapse small helper funcs with only one caller v4: drop multiple client support so we can make direct calls into healthmon instead of chasing pointers and doing indirect calls v3: drag out of rfc status With a bit of luck, this should all go splendidly. Conflicts: This merge required an update on files: - fs/xfs/xfs_healthmon.c - fs/xfs/xfs_verify_media.c Such change was required because a parallel developement changed XFS header file xfs.h naming to xfs_platform.h, so the merge required to update those includes in both files above Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2026-01-28isofs: support full length file names (255 instead of 253)Shawn Landden
Linux file names are in principle limited only to PATH_MAX (which is 4096) but the code in get_rock_ridge_filename() limits them to 253 characters. As mentioned by Jan Kara, the Rockridge standard to ECMA119/ISO9660 has no limit of file name length, but this limits file names to the traditional 255 NAME_MAX value. Signed-off-by: Shawn Landden <slandden@gmail.com> Link: https://patch.msgid.link/CA+49okq0ouJvAx0=txR_gyNKtZj55p3Zw4MB8jXZsGr4bEGjRA@mail.gmail.com Signed-off-by: Jan Kara <jack@suse.cz>
2026-01-28seqlock: fix scoped_seqlock_read kernel-docRandy Dunlap
Eliminate all kernel-doc warnings in seqlock.h: - correct the macro to have "()" immediately following the macro name - don't include the macro parameters in the short description (first line) - make the parameter names in the comments match the actual macro parameter names. - use "::" for the Example WARNING: include/linux/seqlock.h:1341 This comment starts with '/**', but isn't a kernel-doc comment. * scoped_seqlock_read (lock, ss_state) - execute the read side critical Documentation/locking/seqlock:242: include/linux/seqlock.h:1351: WARNING: Definition list ends without a blank line; unexpected unindent. [docutils] Warning: include/linux/seqlock.h:1357 function parameter '_seqlock' not described in 'scoped_seqlock_read' Warning: include/linux/seqlock.h:1357 function parameter '_target' not described in 'scoped_seqlock_read' Fixes: cc39f3872c08 ("seqlock: Introduce scoped_seqlock_read()") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20260123183749.3997533-1-rdunlap@infradead.org
2026-01-28gpio: omap: do not register driver in probe()Danilo Krummrich
Commit 11a78b794496 ("ARM: OMAP: MPUIO wake updates") registers the omap_mpuio_driver from omap_mpuio_init(), which is called from omap_gpio_probe(). However, it neither makes sense to register drivers from probe() callbacks of other drivers, nor does the driver core allow registering drivers with a device lock already being held. The latter was revealed by commit dc23806a7c47 ("driver core: enforce device_lock for driver_match_device()") leading to a potential deadlock condition described in [1]. Additionally, the omap_mpuio_driver is never unregistered from the driver core, even if the module is unloaded. Hence, register the omap_mpuio_driver from the module initcall and unregister it in module_exit(). Link: https://lore.kernel.org/lkml/DFU7CEPUSG9A.1KKGVW4HIPMSH@kernel.org/ [1] Fixes: dc23806a7c47 ("driver core: enforce device_lock for driver_match_device()") Fixes: 11a78b794496 ("ARM: OMAP: MPUIO wake updates") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org> Link: https://patch.msgid.link/20260127201725.35883-1-dakr@kernel.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
2026-01-28tools: Update context analysis macros in compiler_types.hMarco Elver
In sync with the main kernel headers, include a stub version of compiler-context-analysis.h in tools/include/linux/compiler_types.h and remove the sparse context tracking definitions. Since tools/ headers are generally self-contained, provide a standalone tools/include/linux/compiler-context-analysis.h with no-op stubs for now. Also clean up redundant stubs in tools/testing/shared/linux/kernel.h that are now redundant. This fixes build errors in tools/testing/radix-tree/ where headers from include/linux/ (like cleanup.h) are used directly and expect these macros to be defined: | cc -I../shared -I. -I../../include -I../../arch/x86/include -I../../../lib -g -Og -Wall -D_LGPL_SOURCE -fsanitize=address -fsanitize=undefined -c -o radix-tree.o radix-tree.c | In file included from ../shared/linux/cleanup.h:2, | from ../shared/linux/../../../../include/linux/idr.h:18, | from ../shared/linux/idr.h:5, | from radix-tree.c:18: | ../shared/linux/../../../../include/linux/idr.h: In function ‘class_idr_alloc_destructor’: | ../shared/linux/../../../../include/linux/cleanup.h:283:9: error: expected declaration specifiers before ‘__no_context_analysis’ | 283 | __no_context_analysis \ | | ^~~~~~~~~~~~~~~~~~~~~ Closes: https://lore.kernel.org/oe-lkp/202601261546.d7ae2447-lkp@intel.com Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Link: https://patch.msgid.link/20260127111428.3747328-1-elver@google.com
2026-01-28rust: sync: Replace `kernel::c_str!` with C-StringsTamir Duberstein
C-String literals were added in Rust 1.77. Replace instances of `kernel::c_str!` with C-String literals where possible. Signed-off-by: Tamir Duberstein <tamird@kernel.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://patch.msgid.link/20260120-cstr-sync-again-v1-1-2a775a2a36fd@kernel.org Link: https://patch.msgid.link/20260123054624.8226-2-boqun.feng@gmail.com
2026-01-28pinctrl: equilibrium: Fix device node reference leak in pinbank_init()Felix Gu
When calling of_parse_phandle_with_fixed_args(), the caller is responsible to call of_node_put() to release the reference of device node. In pinbank_init(), the reference of the node obtained from the "gpio-ranges" property is never released, resulting in a reference count leak. Add the missing of_node_put() call to fix the leak. Fixes: 1948d5c51dba ("pinctrl: Add pinmux & GPIO controller driver for a new SoC") Signed-off-by: Felix Gu <ustc.gu@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Linus Walleij <linusw@kernel.org>
2026-01-28erofs: mark inodes without acls in erofs_read_inode()Gao Xiang
Similar to commit 91ef18b567da ("ext4: mark inodes without acls in __ext4_iget()"), the ACL state won't be read when the file owner performs a lookup, and the RCU fast path for lookups won't work because the ACL state remains unknown. If there are no extended attributes, or if the xattr filter indicates that no ACL xattr is present, call cache_no_acl() directly. Reviewed-by: Hongbo Li <lihongbo22@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2026-01-28Merge tag 'drm-msm-fixes-2026-01-23' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Late fix for v6.19: GPU: - Fix bogus hwcg register update for a690 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <rob.clark@oss.qualcomm.com> Link: https://patch.msgid.link/CACSVV03A-GE5mNG1OLF3s9UCenQk4x3jO71Hmvr9j+vCF2hc7g@mail.gmail.com
2026-01-27rnbd-clt: fix refcount underflow in device unmap pathChaitanya Kulkarni
During device unmapping (triggered by module unload or explicit unmap), a refcount underflow occurs causing a use-after-free warning: [14747.574913] ------------[ cut here ]------------ [14747.574916] refcount_t: underflow; use-after-free. [14747.574917] WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x55/0x90, CPU#9: kworker/9:1/378 [14747.574924] Modules linked in: rnbd_client(-) rtrs_client rnbd_server rtrs_server rtrs_core ... [14747.574998] CPU: 9 UID: 0 PID: 378 Comm: kworker/9:1 Tainted: G O N 6.19.0-rc3lblk-fnext+ #42 PREEMPT(voluntary) [14747.575005] Workqueue: rnbd_clt_wq unmap_device_work [rnbd_client] [14747.575010] RIP: 0010:refcount_warn_saturate+0x55/0x90 [14747.575037] Call Trace: [14747.575038] <TASK> [14747.575038] rnbd_clt_unmap_device+0x170/0x1d0 [rnbd_client] [14747.575044] process_one_work+0x211/0x600 [14747.575052] worker_thread+0x184/0x330 [14747.575055] ? __pfx_worker_thread+0x10/0x10 [14747.575058] kthread+0x10d/0x250 [14747.575062] ? __pfx_kthread+0x10/0x10 [14747.575066] ret_from_fork+0x319/0x390 [14747.575069] ? __pfx_kthread+0x10/0x10 [14747.575072] ret_from_fork_asm+0x1a/0x30 [14747.575083] </TASK> [14747.575096] ---[ end trace 0000000000000000 ]--- Befor this patch :- The bug is a double kobject_put() on dev->kobj during device cleanup. Kobject Lifecycle: kobject_init_and_add() sets kobj.kref = 1 (initialization) kobject_put() sets kobj.kref = 0 (should be called once) * Before this patch: rnbd_clt_unmap_device() rnbd_destroy_sysfs() kobject_del(&dev->kobj) [remove from sysfs] kobject_put(&dev->kobj) PUT #1 (WRONG!) kref: 1 to 0 rnbd_dev_release() kfree(dev) [DEVICE FREED!] rnbd_destroy_gen_disk() [use-after-free!] rnbd_clt_put_dev() refcount_dec_and_test(&dev->refcount) kobject_put(&dev->kobj) PUT #2 (UNDERFLOW!) kref: 0 to -1 [WARNING!] The first kobject_put() in rnbd_destroy_sysfs() prematurely frees the device via rnbd_dev_release(), then the second kobject_put() in rnbd_clt_put_dev() causes refcount underflow. * After this patch :- Remove kobject_put() from rnbd_destroy_sysfs(). This function should only remove sysfs visibility (kobject_del), not manage object lifetime. Call Graph (FIXED): rnbd_clt_unmap_device() rnbd_destroy_sysfs() kobject_del(&dev->kobj) [remove from sysfs only] [kref unchanged: 1] rnbd_destroy_gen_disk() [device still valid] rnbd_clt_put_dev() refcount_dec_and_test(&dev->refcount) kobject_put(&dev->kobj) ONLY PUT (CORRECT!) kref: 1 to 0 [BALANCED] rnbd_dev_release() kfree(dev) [CLEAN DESTRUCTION] This follows the kernel pattern where sysfs removal (kobject_del) is separate from object destruction (kobject_put). Fixes: 581cf833cac4 ("block: rnbd: add .release to rnbd_dev_ktype") Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-01-27Revert "rnbd-clt: fix refcount underflow in device unmap path"Jens Axboe
This reverts commit ec19ed2b3e2af8ec5380400cdee9cb6560144506. This commit relies on changes queued for 7.0, and isn't safe in its current form for the 6.19 release. Revert it for now for 6.19. Link: https://lore.kernel.org/linux-block/aXhLQmRudk7cSAnT@shinmob/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-01-27io_uring/net: don't continue send bundle if poll was required for retryJens Axboe
If a send bundle has picked a bunch of buffers, then it needs to send all of those to be complete. This may require poll arming, if the send buffer ends up being full. Once a send bundle has been poll armed, no further bundles should be attempted. This allows a current bundle to complete even though it needs to go through polling to do so, but it will not allow another bundle to be started once that has happened. Ideally we would abort a bundle if it was only partially sent, but as some parts of it already went out on the wire, this obviously isn't feasible. Not continuing more bundle attempts post encountering a full socket buffer is the second best thing. Cc: stable@vger.kernel.org Fixes: a05d1f625c7a ("io_uring/net: support bundles for send") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-01-28regmap: reg_default_cb for flat cache defaultsMark Brown
Merge series from "Sheetal ." <sheetal@nvidia.com>: This series adds a reg_default_cb callback for REGCACHE_FLAT to provide defaults for registers not listed in reg_defaults. Defaults are loaded eagerly during regcache init and the callback can use writeable_reg to filter valid addresses and avoid holes.
2026-01-28Merge tag 'drm-rust-next-2026-01-26' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/rust/kernel into drm-next DRM Rust changes for v7.0-rc1 DRM: - Fix documentation for Registration constructors. - Use pin_init::zeroed() for fops initialization. - Annotate DRM helpers with __rust_helper. - Improve safety documentation for gem::Object::new(). - Update AlwaysRefCounted imports. MM: - Prevent integer overflow in page_align(). Nova (Core): - Prepare for Turing support. This includes parsing and handling Turing-specific firmware headers and sections as well as a Turing Falcon HAL implementation. - Get rid of the Result<impl PinInit<T, E>> anti-pattern. - Relocate initializer-specific code into the appropriate initializer. - Use CStr::from_bytes_until_nul() to remove custom helpers. - Improve handling of unexpected firmware values. - Clean up redundant debug prints. - Replace c_str!() with native Rust C-string literals. - Update nova-core task list. Nova (DRM): - Align GEM object size to system page size. Tyr: - Use generated uAPI bindings for GpuInfo. - Replace manual sleeps with read_poll_timeout(). - Replace c_str!() with native Rust C-string literals. - Suppress warnings for unread fields. - Fix incorrect register name in print statement. Signed-off-by: Dave Airlie <airlied@redhat.com> From: "Danilo Krummrich" <dakr@kernel.org> Link: https://patch.msgid.link/DFYW1WV6DUCG.3K8V2DAVD1Q4A@kernel.org
2026-01-27ipc: don't audit capability check in ipc_permissions()Ondrej Mosnacek
The IPC sysctls implement the ctl_table_root::permissions hook and they override the file access mode based on the CAP_CHECKPOINT_RESTORE capability, which is being checked regardless of whether any access is actually denied or not, so if an LSM denies the capability, an audit record may be logged even when access is in fact granted. It wouldn't be viable to restructure the sysctl permission logic to only check the capability when the access would be actually denied if it's not granted. Thus, do the same as in net_ctl_permissions() (net/sysctl_net.c) - switch from ns_capable() to ns_capable_noaudit(), so that the check never emits an audit record. Fixes: 0889f44e2810 ("ipc: Check permissions for checkpoint_restart sysctls at open time") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Acked-by: Alexey Gladkov <legion@kernel.org> Acked-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: Serge Hallyn <sergeh@kernel.org>
2026-01-28wifi: rtw89: regd: update regulatory map to R73-R54Zong-Zhe Yang
Sync Realtek Channel Plan R73 and Realtek Regulatory R54. Configure 6 GHz field of Realtek regd for the following countries. PY NA BD ID VN TN GL GP YT EH Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260123013957.16418-12-pkshih@realtek.com
2026-01-28wifi: rtw89: pci: validate release report content before using for RTL8922DEPing-Ke Shih
The commit 957eda596c76 ("wifi: rtw89: pci: validate sequence number of TX release report") does validation on existing chips, which somehow a release report of SKB becomes malformed. As no clear cause found, add rules ahead for RTL8922DE to avoid crash if it happens. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260123013957.16418-11-pkshih@realtek.com
2026-01-28wifi: rtw89: get designated link to replace link instance 0Zong-Zhe Yang
Clean up some places where still to get link instance 0 directly. Since now MLSR switch is supported, it's not guaranteed to always run on link instance 0. So, prefer to get designated link in most cases. For now, the only exception is MCC (multi-channel concurrency) case. How to fill content of its H2C command depends on how to choose link instance, so cannot simply change it as above. Will handle MCC case separately afterwards. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260123013957.16418-10-pkshih@realtek.com
2026-01-28wifi: rtw89: 8922a: configure FW version for SIM_SER_L0L1_BY_HALT_H2CZong-Zhe Yang
After FW version 0.35.97.0, 8922A supports SIM_SER_L0L1_BY_HALT_H2C FW feature. It allows to simulate FW L0/L1 crash under PS mode. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260123013957.16418-9-pkshih@realtek.com
2026-01-28wifi: rtw89: phy: add PHY C2H event dummy handler for func 1-7 and 2-10Ping-Ke Shih
The two functions aren't implemented and hard necessary by driver. Implement dummy handler to avoid messages: rtw89_8922de 0000:03:00.0: PHY c2h class 1 func 7 not support rtw89_8922de 0000:03:00.0: PHY c2h class 2 func 10 not support Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260123013957.16418-8-pkshih@realtek.com
2026-01-28wifi: rtw89: fw: correct content of DACK H2C commandPing-Ke Shih
The fields of command should be u8 instead of __le32. However, current firmware doesn't really use the data for now, so this mistake doesn't impact performance. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260123013957.16418-7-pkshih@realtek.com
2026-01-28wifi: rtw89: rfk: update RFK report format of IQK, DACK and TXGAPKPing-Ke Shih
The report formats of IQK, DACK and TXGAPK are changed. Update them accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260123013957.16418-6-pkshih@realtek.com
2026-01-28wifi: rtw89: rfk: add to print debug log of CIM3KPing-Ke Shih
Add calibration report of CIM3K, which does calibration in firmware and send a C2H event as debug purpose. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260123013957.16418-5-pkshih@realtek.com
2026-01-28wifi: rtw89: rfk: add firmware command to do CIM3KPing-Ke Shih
CIM is short for counter intermodulation products 3rd-order. Due to non-linearity in transmit path, need a calibration to yield performance for RF system. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260123013957.16418-4-pkshih@realtek.com
2026-01-28wifi: rtw89: rfk: add to print debug log of TX IQKPing-Ke Shih
Add report format for TX IQK, which do calibration in firmware and send a C2H event as debug purpose. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260123013957.16418-3-pkshih@realtek.com
2026-01-28Merge tag 'drm-msm-next-2026-01-23' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Changes for v6.20 GPU: - Document a612/RGMU dt bindings - UBWC 6.0 support (for A840 / Kaanapali) - a225 support - Fixes DPU: - Switched to use virtual planes by default - Fixed DSI CMD panels on DPU 3.x - Rewrote format handling to remove intermediate representation - Fixed watchdog on DPU 8.x+ - Fixed TE / Vsync source setting on DPU 8.x+ - Added 3D_Mux on SC7280 - Kaanapali platform support - Fixed UBWC register programming - Made RM reserve DSPP-enabled mixers for CRTCs with LMs. - Gamma correction support DP: - Enabled support for eDP 1.4+ link rate tables - Fixed MDSS1 DP indices on SA8775P, making them to work - Fixed msm_dp_ctrl_config_msa() to work with LLVM 20 DSI: - Documented QCS8300 as compatible with SA8775P - Kaanapali platform support DSI PHY: - switched to divider_determine_rate() MDP5: - Dropped support for MSM8998, SDM660 and SDM630 (switched over to DPU) MDSS: - Kaanapali platform support - Fixed UBWC register programming Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <rob.clark@oss.qualcomm.com> Link: https://patch.msgid.link/CACSVV03Sbeca93A+gGh-TKpzFYVabbkWVgPCCicG0_NQG+5Y2A@mail.gmail.com
2026-01-28wifi: rtw89: rfk: add firmware command to do TX IQKPing-Ke Shih
TX IQK is a RF calibration, which driver call this H2C command to trigger the calibration. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260123013957.16418-2-pkshih@realtek.com
2026-01-28BackMerge tag 'v6.19-rc7' into drm-nextDave Airlie
Linux 6.19-rc7 This is needed for msm and rust trees. Signed-off-by: Dave Airlie <airlied@redhat.com>
2026-01-27bpf: Fix tcx/netkit detach permissions when prog fd isn't givenGuillaume Gonnet
This commit fixes a security issue where BPF_PROG_DETACH on tcx or netkit devices could be executed by any user when no program fd was provided, bypassing permission checks. The fix adds a capability check for CAP_NET_ADMIN or CAP_SYS_ADMIN in this case. Fixes: e420bed02507 ("bpf: Add fd-based tcx multi-prog infra with link support") Signed-off-by: Guillaume Gonnet <ggonnet.linux@gmail.com> Link: https://lore.kernel.org/r/20260127160200.10395-1-ggonnet.linux@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-01-27gve: fix probe failure if clock read failsJordan Rhee
If timestamping is supported, GVE reads the clock during probe, which can fail for various reasons. Previously, this failure would abort the driver probe, rendering the device unusable. This behavior has been observed on production GCP VMs, causing driver initialization to fail completely. This patch allows the driver to degrade gracefully. If gve_init_clock() fails, it logs a warning and continues loading the driver without PTP support. Cc: stable@vger.kernel.org Fixes: a479a27f4da4 ("gve: Move gve_init_clock to after AQ CONFIGURE_DEVICE_RESOURCES call") Signed-off-by: Jordan Rhee <jordanrhee@google.com> Reviewed-by: Shachar Raindel <shacharr@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Link: https://patch.msgid.link/20260127010210.969823-1-hramamurthy@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-27Merge branch 'mlx5-misc-fixes-2026-01-26'Jakub Kicinski
Tariq Toukan says: ==================== mlx5 misc fixes 2026-01-26 misc bug fixes from the team to the mlx5 core and Eth drivers. ==================== Link: https://patch.msgid.link/1769411695-18820-1-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-27net/mlx5e: Account for netdev stats in ndo_get_stats64Gal Pressman
The driver's ndo_get_stats64 callback is only reporting mlx5 counters, without accounting for the netdev stats, causing errors from the network stack to be invisible in statistics. Add netdev_stats_to_stats64() call to first populate the counters, then add mlx5 counters on top, ensuring both are accounted for (where appropriate). Fixes: f62b8bb8f2d3 ("net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality") Signed-off-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1769411695-18820-4-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-27net/mlx5e: TC, delete flows only for existing peersMark Bloch
When deleting TC steering flows, iterate only over actual devcom peers instead of assuming all possible ports exist. This avoids touching non-existent peers and ensures cleanup is limited to devices the driver is currently connected to. BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 133c8a067 P4D 0 Oops: Oops: 0002 [#1] SMP CPU: 19 UID: 0 PID: 2169 Comm: tc Not tainted 6.18.0+ #156 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_tc_del_fdb_peers_flow+0xbe/0x200 [mlx5_core] Code: 00 00 a8 08 74 a8 49 8b 46 18 f6 c4 02 74 9f 4c 8d bf a0 12 00 00 4c 89 ff e8 0e e7 96 e1 49 8b 44 24 08 49 8b 0c 24 4c 89 ff <48> 89 41 08 48 89 08 49 89 2c 24 49 89 5c 24 08 e8 7d ce 96 e1 49 RSP: 0018:ff11000143867528 EFLAGS: 00010246 RAX: 0000000000000000 RBX: dead000000000122 RCX: 0000000000000000 RDX: ff11000143691580 RSI: ff110001026e5000 RDI: ff11000106f3d2a0 RBP: dead000000000100 R08: 00000000000003fd R09: 0000000000000002 R10: ff11000101c75690 R11: ff1100085faea178 R12: ff11000115f0ae78 R13: 0000000000000000 R14: ff11000115f0a800 R15: ff11000106f3d2a0 FS: 00007f35236bf740(0000) GS:ff110008dc809000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000157a01001 CR4: 0000000000373eb0 Call Trace: <TASK> mlx5e_tc_del_flow+0x46/0x270 [mlx5_core] mlx5e_flow_put+0x25/0x50 [mlx5_core] mlx5e_delete_flower+0x2a6/0x3e0 [mlx5_core] tc_setup_cb_reoffload+0x20/0x80 fl_reoffload+0x26f/0x2f0 [cls_flower] ? mlx5e_tc_reoffload_flows_work+0xc0/0xc0 [mlx5_core] ? mlx5e_tc_reoffload_flows_work+0xc0/0xc0 [mlx5_core] tcf_block_playback_offloads+0x9e/0x1c0 tcf_block_unbind+0x7b/0xd0 tcf_block_setup+0x186/0x1d0 tcf_block_offload_cmd.isra.0+0xef/0x130 tcf_block_offload_unbind+0x43/0x70 __tcf_block_put+0x85/0x160 ingress_destroy+0x32/0x110 [sch_ingress] __qdisc_destroy+0x44/0x100 qdisc_graft+0x22b/0x610 tc_get_qdisc+0x183/0x4d0 rtnetlink_rcv_msg+0x2d7/0x3d0 ? rtnl_calcit.isra.0+0x100/0x100 netlink_rcv_skb+0x53/0x100 netlink_unicast+0x249/0x320 ? __alloc_skb+0x102/0x1f0 netlink_sendmsg+0x1e3/0x420 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x1ef/0x230 ? copy_msghdr_from_user+0x6c/0xa0 ___sys_sendmsg+0x7f/0xc0 ? ___sys_recvmsg+0x8a/0xc0 ? __sys_sendto+0x119/0x180 __sys_sendmsg+0x61/0xb0 do_syscall_64+0x55/0x640 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f35238bb764 Code: 15 b9 86 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00 f3 0f 1e fa 80 3d e5 08 0d 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55 RSP: 002b:00007ffed4c35638 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000055a2efcc75e0 RCX: 00007f35238bb764 RDX: 0000000000000000 RSI: 00007ffed4c356a0 RDI: 0000000000000003 RBP: 00007ffed4c35710 R08: 0000000000000010 R09: 00007f3523984b20 R10: 0000000000000004 R11: 0000000000000202 R12: 00007ffed4c35790 R13: 000000006947df8f R14: 000055a2efcc75e0 R15: 00007ffed4c35780 Fixes: 9be6c21fdcf8 ("net/mlx5e: Handle offloads flows per peer") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1769411695-18820-3-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-27net/mlx5: Fix Unbinding uplink-netdev in switchdev modeShay Drory
It is possible to unbind the uplink ETH driver while the E-Switch is in switchdev mode. This leads to netdevice reference counting issues[1], as the driver removal path was not designed to clean up from this state. During uplink ETH driver removal (_mlx5e_remove), the code now waits for any concurrent E-Switch mode transition to finish. It then removes the REPs auxiliary device, if exists. This ensures a graceful cleanup. [1] unregister_netdevice: waiting for eth2 to become free. Usage count = 2 ref_tracker: netdev@00000000c912e04b has 1/1 users at ib_device_set_netdev+0x130/0x270 [ib_core] mlx5_ib_vport_rep_load+0xf4/0x3e0 [mlx5_ib] mlx5_esw_offloads_rep_load+0xc7/0xe0 [mlx5_core] esw_offloads_enable+0x583/0x900 [mlx5_core] mlx5_eswitch_enable_locked+0x1b2/0x290 [mlx5_core] mlx5_devlink_eswitch_mode_set+0x107/0x3e0 [mlx5_core] devlink_nl_eswitch_set_doit+0x60/0xd0 genl_family_rcv_msg_doit+0xe0/0x130 genl_rcv_msg+0x183/0x290 netlink_rcv_skb+0x4b/0xf0 genl_rcv+0x24/0x40 netlink_unicast+0x255/0x380 netlink_sendmsg+0x1f3/0x420 __sock_sendmsg+0x38/0x60 __sys_sendto+0x119/0x180 __x64_sys_sendto+0x20/0x30 Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1769411695-18820-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-27selftests: ptp: treat unsupported PHC operations as skipJunjie Cao
Some PTP hardware clock (PHC) devices may return -EOPNOTSUPP for operations like settime, adjtime, or adjfreq. This commonly occurs with timestamp-only PHC implementations that don't support full clock control. For background, syzbot previously exposed a crash risk when PTP clock drivers lacked required callbacks[1]. Subsequent work[2] made callback presence a registration requirement. As a result, some drivers (like iwlwifi MVM/MLD[3]) now provide stub callbacks that return -EOPNOTSUPP for unsupported operations. When phc_ctl encounters such devices, the "Operation not supported" error should be treated as a skip (device limitation) rather than a test failure. This patch: - Adds [SKIP] output handling in log_test() - Detects "Operation not supported" from phc_ctl and returns ksft_skip - Returns ksft_skip if all tests are skipped, preventing false-positive results when testing timestamp-only PHC implementations Link: https://lore.kernel.org/netdev/20251028043216.1971292-1-junjie.cao@intel.com/ [1] Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=dfb073d32cac [2] Link: https://lore.kernel.org/netdev/20251204123204.9316-1-ziyao@disroot.org/ [3] Signed-off-by: Junjie Cao <junjie.cao@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260126061532.12532-2-junjie.cao@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-27selftests: ptp: use KSFT_SKIP exit code for skip scenariosJunjie Cao
The kselftest framework defines KSFT_SKIP=4 as the standard exit code for skipped tests. However, phc.sh currently uses a mix of 'exit 0' and 'exit 1' to indicate skip conditions, which can confuse test harnesses and CI systems. This patch introduces ksft_skip=4 variable and unifies all skip exit paths to use 'exit $ksft_skip', consistent with other selftests like net/lib.sh and net/fib_nexthops.sh. Signed-off-by: Junjie Cao <junjie.cao@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260126061532.12532-1-junjie.cao@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-27net: usb: int51x1: use usbnet_cdc_update_filterEthan Nelson-Moore
The int51x1 driver uses the same requests as USB CDC to handle packet filtering, but provides its own definitions and function to handle it. The chip datasheet says the requests are CDC compliant. Replace this unnecessary code with a reference to usbnet_cdc_update_filter. Also fix the broken datasheet link and remove an empty comment. Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com> Link: https://patch.msgid.link/20260126044049.40359-1-enelsonmoore@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-27tools/sched_ext: add arena based schedulerEmil Tsalapatis
Add a scheduler that uses BPF arenas to manage task context data. Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2026-01-27tools/sched_ext: add scx_pair schedulerEmil Tsalapatis
Add the scx_pair cgroup-based core scheduler. Cc: Tejun Heo <tj@kernel.org> Cc: David Vernet <dvernet@meta.com> Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2026-01-27tools/sched_ext: add scx_userland schedulerEmil Tsalapatis
Add in the scx_userland scheduler that does vruntime-based scheduling in userspace code and communicates scheduling decisions to BPF by accessing and modifying globals through the skeleton. Cc: Tejun Heo <tj@kernel.org> Cc: David Vernet <dvernet@meta.com> Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2026-01-27Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2026-01-26 (ice, idpf) For ice: Jake converts ring stats to utilize u64_stats APIs and performs some cleanups along the way. Alexander reorganizes layout of Tx and Rx rings for cacheline locality and utilizes __cacheline_group* macros on the new layouts. For idpf: YiFei Zhu adds support for BPF kfunc reporting of hardware Rx timestamps. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: idpf: export RX hardware timestamping information to XDP ice: reshuffle and group Rx and Tx queue fields by cachelines ice: convert all ring stats to u64_stats_t ice: shorten ring stat names and add accessors ice: use u64_stats API to access pkts/bytes in dim sample ice: remove ice_q_stats struct and use struct_group ice: pass pointer to ice_fetch_u64_stats_per_ring ==================== Link: https://patch.msgid.link/20260126224313.3847849-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-27ethtool: remove ETHTOOL_GRXRINGS fallback through get_rxnfcBreno Leitao
All drivers that need to report the RX ring count now implement the get_rx_ring_count callback directly. Remove the legacy fallback path that obtained this information by calling get_rxnfc with ETHTOOL_GRXRINGS. This simplifies the code and makes get_rx_ring_count the only way to retrieve the RX ring count. Note: ethtool_get_rx_ring_count() returns int to allow returning -EOPNOTSUPP, while the callback returns u32. The implicit conversion is safe since RX ring counts will not exceed INT_MAX while we are still alive. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20260126-grxring_final-v1-1-0981cb24512e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-27Merge branch 'single-mss-length-in-udp-gso_partial'Jakub Kicinski
Gal Pressman says: ==================== Single MSS length in UDP GSO_PARTIAL This series addresses an inconsistency in how UDP GSO_PARTIAL handles the UDP header length field. Currently, when GSO_PARTIAL segmentation is used, the UDP header length contains the large MSS size, requiring drivers to manually adjust it before transmitting. This is inconsistent with how tunnel GSO_PARTIAL handles outer headers in UDP tunnels, where the length is set to the single segment size. This was originally suggested by Alexander Duyck back in 2018: https://lore.kernel.org/netdev/CAKgT0UcdnUWgr3KQ=RnLKigokkiUuYefmL-ePpDvJOBNpKScFA@mail.gmail.com/ The first patch fixes the core UDP offload code to set the UDP length field to the single segment size (gso_size + UDP header) instead of the large MSS size. This provides hardware with a proper template length value for final segmentation. The subsequent patches remove the now redundant UDP header length adjustments from the mlx5e and aquantia drivers, as the core code now handles this correctly. I couldn't find any other drivers that support UDP GSO_PARTIAL; idpf supports UDP segmentation, but it does not use GSO_PARTIAL. ==================== Link: https://patch.msgid.link/20260125121649.778086-1-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-27net: aquantia: Remove redundant UDP length adjustment with GSO_PARTIALGal Pressman
GSO_PARTIAL now takes care of updating the UDP header length, remove the redundant assignment in aq_nic_map_skb(). Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20260125121649.778086-4-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>