| Age | Commit message (Collapse) | Author |
|---|
|
A power-on sequence table is introduced to initialize AFE (Analogue Front
End) connecting to RF components. Build the sequence in firmware file,
and use a parser to execute the sequences including write/poll/delay
actions.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065314.38846-1-pkshih@realtek.com
|
|
The header v2 of ppdu status is optional, If it is not enabled, the RX
path must be obtained from IE00 or IE01. Append the IE00 part.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065213.38659-5-pkshih@realtek.com
|
|
The IE length of RTW89_PHYSTS_IE09_FTR_0 is dynamic, need to calculate
more to get it. This IE is not necessary now, disable it to avoid get
wrong IE length to let the parse function check failed.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065213.38659-4-pkshih@realtek.com
|
|
It makes more sense to use ieee80211_tx_info::driver_data instead of
ieee80211_tx_info::status.status_driver_data which is used to share
TX status reporting to mac80211, because actually driver calls
ieee80211_tx_info_clear_status() to clear the content including
status_driver_data in rtw89_pci_tx_status() before filling the status.
Review and point out the scope (by comments) driver can safely use
ieee80211_tx_info::driver_data between rtw89_hci_tx_write() and
calling ieee80211_tx_info_clear_status().
Add BUILD_BUG_ON() to assert that driver struct size is smaller than
the size defined by mac80211.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065213.38659-3-pkshih@realtek.com
|
|
Kuniyuki Iwashima says:
====================
net: Fix UAF of sk_dst_get(sk)->dev.
syzbot caught use-after-free of sk_dst_get(sk)->dev,
which was not fetched under RCU nor RTNL. [0]
Patch 1 ~ 5, 7 fix UAF in smc, tcp, ktls, mptcp
Patch 6 fixes dst ref leak in mptcp
[0]: https://lore.kernel.org/68c237c7.050a0220.3c6139.0036.GAE@google.com
v1: https://lore.kernel.org/20250911030620.1284754-1-kuniyu@google.com
====================
Link: https://patch.msgid.link/20250916214758.650211-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mptcp_active_enable() is called from subflow_finish_connect(),
which is icsk->icsk_af_ops->sk_rx_dst_set() and it's not always
under RCU.
Using sk_dst_get(sk)->dev could trigger UAF.
Let's use __sk_dst_get() and dst_dev_rcu().
Fixes: 27069e7cb3d1 ("mptcp: disable active MPTCP in case of blackhole")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250916214758.650211-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mptcp_active_enable() calls sk_dst_get(), which returns dst with its
refcount bumped, but forgot dst_release().
Let's add missing dst_release().
Cc: stable@vger.kernel.org
Fixes: 27069e7cb3d1 ("mptcp: disable active MPTCP in case of blackhole")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250916214758.650211-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
get_netdev_for_sock() is called during setsockopt(),
so not under RCU.
Using sk_dst_get(sk)->dev could trigger UAF.
Let's use __sk_dst_get() and dst_dev_rcu().
Note that the only ->ndo_sk_get_lower_dev() user is
bond_sk_get_lower_dev(), which uses RCU.
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250916214758.650211-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
smc_vlan_by_tcpsk() fetches sk_dst_get(sk)->dev before RTNL and
passes it to netdev_walk_all_lower_dev(), which is illegal.
Also, smc_vlan_by_tcpsk_walk() does not require RTNL at all.
Let's use __sk_dst_get(), dst_dev_rcu(), and
netdev_walk_all_lower_dev_rcu().
Note that the returned value of smc_vlan_by_tcpsk() is not used
in the caller.
Fixes: 0cfdd8f92cac ("smc: connection and link group creation")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250916214758.650211-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
smc_clc_prfx_match() is called from smc_listen_work() and
not under RCU nor RTNL.
Using sk_dst_get(sk)->dev could trigger UAF.
Let's use __sk_dst_get() and dst_dev_rcu().
Note that the returned value of smc_clc_prfx_match() is not
used in the caller.
Fixes: a046d57da19f ("smc: CLC handshake (incl. preparation steps)")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250916214758.650211-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
smc_clc_prfx_set() is called during connect() and not under RCU
nor RTNL.
Using sk_dst_get(sk)->dev could trigger UAF.
Let's use __sk_dst_get() and dev_dst_rcu() under rcu_read_lock()
after kernel_getsockname().
Note that the returned value of smc_clc_prfx_set() is not used
in the caller.
While at it, we change the 1st arg of smc_clc_prfx_set[46]_rcu()
not to touch dst there.
Fixes: a046d57da19f ("smc: CLC handshake (incl. preparation steps)")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250916214758.650211-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported use-after-free of net_device in __pnet_find_base_ndev(),
which was called during connect(). [0]
smc_pnet_find_ism_resource() fetches sk_dst_get(sk)->dev and passes
down to pnet_find_base_ndev(), where RTNL is held. Then, UAF happened
at __pnet_find_base_ndev() when the dev is first used.
This means dev had already been freed before acquiring RTNL in
pnet_find_base_ndev().
While dev is going away, dst->dev could be swapped with blackhole_netdev,
and the dev's refcnt by dst will be released.
We must hold dev's refcnt before calling smc_pnet_find_ism_resource().
Also, smc_pnet_find_roce_resource() has the same problem.
Let's use __sk_dst_get() and dst_dev_rcu() in the two functions.
[0]:
BUG: KASAN: use-after-free in __pnet_find_base_ndev+0x1b1/0x1c0 net/smc/smc_pnet.c:926
Read of size 1 at addr ffff888036bac33a by task syz.0.3632/18609
CPU: 1 UID: 0 PID: 18609 Comm: syz.0.3632 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
__pnet_find_base_ndev+0x1b1/0x1c0 net/smc/smc_pnet.c:926
pnet_find_base_ndev net/smc/smc_pnet.c:946 [inline]
smc_pnet_find_ism_by_pnetid net/smc/smc_pnet.c:1103 [inline]
smc_pnet_find_ism_resource+0xef/0x390 net/smc/smc_pnet.c:1154
smc_find_ism_device net/smc/af_smc.c:1030 [inline]
smc_find_proposal_devices net/smc/af_smc.c:1115 [inline]
__smc_connect+0x372/0x1890 net/smc/af_smc.c:1545
smc_connect+0x877/0xd90 net/smc/af_smc.c:1715
__sys_connect_file net/socket.c:2086 [inline]
__sys_connect+0x313/0x440 net/socket.c:2105
__do_sys_connect net/socket.c:2111 [inline]
__se_sys_connect net/socket.c:2108 [inline]
__x64_sys_connect+0x7a/0x90 net/socket.c:2108
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f47cbf8eba9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f47ccdb1038 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 00007f47cc1d5fa0 RCX: 00007f47cbf8eba9
RDX: 0000000000000010 RSI: 0000200000000280 RDI: 000000000000000b
RBP: 00007f47cc011e19 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f47cc1d6038 R14: 00007f47cc1d5fa0 R15: 00007ffc512f8aa8
</TASK>
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888036bacd00 pfn:0x36bac
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000000 ffffea0001243d08 ffff8880b863fdc0 0000000000000000
raw: ffff888036bacd00 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 2, migratetype Unmovable, gfp_mask 0x446dc0(GFP_KERNEL_ACCOUNT|__GFP_ZERO|__GFP_NOWARN|__GFP_RETRY_MAYFAIL|__GFP_COMP), pid 16741, tgid 16741 (syz-executor), ts 343313197788, free_ts 380670750466
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x240/0x2a0 mm/page_alloc.c:1851
prep_new_page mm/page_alloc.c:1859 [inline]
get_page_from_freelist+0x21e4/0x22c0 mm/page_alloc.c:3858
__alloc_frozen_pages_noprof+0x181/0x370 mm/page_alloc.c:5148
alloc_pages_mpol+0x232/0x4a0 mm/mempolicy.c:2416
___kmalloc_large_node+0x5f/0x1b0 mm/slub.c:4317
__kmalloc_large_node_noprof+0x18/0x90 mm/slub.c:4348
__do_kmalloc_node mm/slub.c:4364 [inline]
__kvmalloc_node_noprof+0x6d/0x5f0 mm/slub.c:5067
alloc_netdev_mqs+0xa3/0x11b0 net/core/dev.c:11812
tun_set_iff+0x532/0xef0 drivers/net/tun.c:2775
__tun_chr_ioctl+0x788/0x1df0 drivers/net/tun.c:3085
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:598 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
page last free pid 18610 tgid 18608 stack trace:
reset_page_owner include/linux/page_owner.h:25 [inline]
free_pages_prepare mm/page_alloc.c:1395 [inline]
__free_frozen_pages+0xbc4/0xd30 mm/page_alloc.c:2895
free_large_kmalloc+0x13a/0x1f0 mm/slub.c:4820
device_release+0x99/0x1c0 drivers/base/core.c:-1
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x22b/0x480 lib/kobject.c:737
netdev_run_todo+0xd2e/0xea0 net/core/dev.c:11513
rtnl_unlock net/core/rtnetlink.c:157 [inline]
rtnl_net_unlock include/linux/rtnetlink.h:135 [inline]
rtnl_dellink+0x537/0x710 net/core/rtnetlink.c:3563
rtnetlink_rcv_msg+0x7cc/0xb70 net/core/rtnetlink.c:6946
netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2552
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0x82f/0x9e0 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:729
____sys_sendmsg+0x505/0x830 net/socket.c:2614
___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668
__sys_sendmsg net/socket.c:2700 [inline]
__do_sys_sendmsg net/socket.c:2705 [inline]
__se_sys_sendmsg net/socket.c:2703 [inline]
__x64_sys_sendmsg+0x19b/0x260 net/socket.c:2703
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Memory state around the buggy address:
ffff888036bac200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888036bac280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff888036bac300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888036bac380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888036bac400: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Fixes: 0afff91c6f5e ("net/smc: add pnetid support")
Fixes: 1619f770589a ("net/smc: add pnetid support for SMC-D and ISM")
Reported-by: syzbot+ea28e9d85be2f327b6c6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68c237c7.050a0220.3c6139.0036.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250916214758.650211-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Originally, to directly align with the chanctx design, getter of managed
chanctx returned a default channel when a link doesn't own a chanctx yet.
Then, callers could simply use the return without trivial NULL checking.
But in MLD HW settings of next chip, there will be a special case that a
caller needs to check if a link has owned chanctx or not to determine
CCK hardware circuit working on HW-x. So, add a func *_or_null for this
first.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065213.38659-2-pkshih@realtek.com
|
|
All recent platforms (including all the ones officially supported by the
Xe driver) do not allow concurrent execution of RCS and CCS workloads
from different address spaces, with the HW blocking the context switch
when it detects such a scenario.
The DUAL_QUEUE flag helps with this, by causing the GuC to not submit a
context it knows will not be able to execute. This, however, causes a new
problem: if RCS and CCS queues have pending workloads from different
address spaces, the GuC needs to choose from which of the 2 queues to
pick the next workload to execute. By default, the GuC prioritizes RCS
submissions over CCS ones, which can lead to CCS workloads being
significantly (or completely) starved of execution time.
The driver can tune this by setting a dedicated scheduling policy KLV;
this KLV allows the driver to specify a quantum (in ms) and a ratio
(percentage value between 0 and 100), and the GuC will prioritize the CCS
for that percentage of each quantum.
Given that we want to guarantee enough RCS throughput to avoid missing
frames, we set the yield policy to 20% of each 80ms interval.
v2: updated quantum and ratio, improved comment, use xe_guc_submit_disable
in gt_sanitize
Fixes: d9a1ae0d17bd ("drm/xe/guc: Enable WA_DUAL_QUEUE for newer platforms")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Tested-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://lore.kernel.org/r/20250905235632.3333247-2-daniele.ceraolospurio@intel.com
(cherry picked from commit 88434448438e4302e272b2a2b810b42e05ea024b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo added #include "xe_guc_submit.h" while backporting]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe fix from Masami Hiramatsu:
- kprobe-event: Fix null-ptr-deref in trace_kprobe_create_internal(),
by handling NULL return of kmemdup() correctly
* tag 'probes-fixes-v6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: kprobe-event: Fix null-ptr-deref in trace_kprobe_create_internal()
|
|
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and fold __nfsd_mkdir() into it.
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
mkdir should incrment the parent's refcount; symlink should not.
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-09-16 (ice, i40e, ixgbe, igc)
For ice:
Jake resolves leaking pages with multi-buffer frames when a 0-sized
descriptor is encountered.
For i40e:
Maciej removes a redundant, and incorrect, memory barrier.
For ixgbe:
Jedrzej adjusts lifespan of ACI lock to ensure uses are while it is
valid.
For igc:
Kohei Enju does not fail probe on LED setup failure which resolves a
kernel panic in the cleanup path, if we were to fail.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: don't fail igc_probe() on LED setup error
ixgbe: destroy aci.lock later within ixgbe_remove path
ixgbe: initialize aci.lock before it's used
i40e: remove redundant memory barrier when cleaning Tx descs
ice: fix Rx page leak on multi-buffer frames
====================
Link: https://patch.msgid.link/20250916212801.2818440-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just two fixes:
- fix crash in rfkill due to uninitialized type_name
- fix aggregation in iwlwifi 7000/8000 devices
* tag 'wireless-2025-09-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer
wifi: iwlwifi: pcie: fix byte count table for some devices
====================
Link: https://patch.msgid.link/20250917105159.161583-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kuniyuki Iwashima says:
====================
tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect().
syzbot reported a warning in tcp_retransmit_timer() for TCP Fast
Open socket.
Patch 1 fixes the issue and Patch 2 adds a test for the scenario.
====================
Link: https://patch.msgid.link/20250915175800.118793-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test reproduces the scenario explained in the previous patch.
Without the patch, the test triggers the warning and cannot see the last
retransmitted packet.
# ./ksft_runner.sh tcp_fastopen_server_reset-after-disconnect.pkt
TAP version 13
1..2
[ 29.229250] ------------[ cut here ]------------
[ 29.231414] WARNING: CPU: 26 PID: 0 at net/ipv4/tcp_timer.c:542 tcp_retransmit_timer+0x32/0x9f0
...
tcp_fastopen_server_reset-after-disconnect.pkt:26: error handling packet: Timed out waiting for packet
not ok 1 ipv4
tcp_fastopen_server_reset-after-disconnect.pkt:26: error handling packet: Timed out waiting for packet
not ok 2 ipv6
# Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250915175800.118793-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported the splat below where a socket had tcp_sk(sk)->fastopen_rsk
in the TCP_ESTABLISHED state. [0]
syzbot reused the server-side TCP Fast Open socket as a new client before
the TFO socket completes 3WHS:
1. accept()
2. connect(AF_UNSPEC)
3. connect() to another destination
As of accept(), sk->sk_state is TCP_SYN_RECV, and tcp_disconnect() changes
it to TCP_CLOSE and makes connect() possible, which restarts timers.
Since tcp_disconnect() forgot to clear tcp_sk(sk)->fastopen_rsk, the
retransmit timer triggered the warning and the intended packet was not
retransmitted.
Let's call reqsk_fastopen_remove() in tcp_disconnect().
[0]:
WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_timer.c:542 tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7))
Modules linked in:
CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.17.0-rc5-g201825fb4278 #62 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7))
Code: 41 55 41 54 55 53 48 8b af b8 08 00 00 48 89 fb 48 85 ed 0f 84 55 01 00 00 0f b6 47 12 3c 03 74 0c 0f b6 47 12 3c 04 74 04 90 <0f> 0b 90 48 8b 85 c0 00 00 00 48 89 ef 48 8b 40 30 e8 6a 4f 06 3e
RSP: 0018:ffffc900002f8d40 EFLAGS: 00010293
RAX: 0000000000000002 RBX: ffff888106911400 RCX: 0000000000000017
RDX: 0000000002517619 RSI: ffffffff83764080 RDI: ffff888106911400
RBP: ffff888106d5c000 R08: 0000000000000001 R09: ffffc900002f8de8
R10: 00000000000000c2 R11: ffffc900002f8ff8 R12: ffff888106911540
R13: ffff888106911480 R14: ffff888106911840 R15: ffffc900002f8de0
FS: 0000000000000000(0000) GS:ffff88907b768000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8044d69d90 CR3: 0000000002c30003 CR4: 0000000000370ef0
Call Trace:
<IRQ>
tcp_write_timer (net/ipv4/tcp_timer.c:738)
call_timer_fn (kernel/time/timer.c:1747)
__run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2372)
timer_expire_remote (kernel/time/timer.c:2385 kernel/time/timer.c:2376 kernel/time/timer.c:2135)
tmigr_handle_remote_up (kernel/time/timer_migration.c:944 kernel/time/timer_migration.c:1035)
__walk_groups.isra.0 (kernel/time/timer_migration.c:533 (discriminator 1))
tmigr_handle_remote (kernel/time/timer_migration.c:1096)
handle_softirqs (./arch/x86/include/asm/jump_label.h:36 ./include/trace/events/irq.h:142 kernel/softirq.c:580)
irq_exit_rcu (kernel/softirq.c:614 kernel/softirq.c:453 kernel/softirq.c:680 kernel/softirq.c:696)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1050 (discriminator 35) arch/x86/kernel/apic/apic.c:1050 (discriminator 35))
</IRQ>
Fixes: 8336886f786f ("tcp: TCP Fast Open Server - support TFO listeners")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250915175800.118793-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add charge control support for SM8550 and X1E80100. It's supported
with below two power supply properties:
charge_control_end_threshold: The battery SoC (State of Charge)
threshold at which the charging should be terminated.
charge_control_start_threshold: The battery SoC threshold at
which the charging should be resumed.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on Thinkpad T14S OLED
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add nvmem properties to retrieve charge control configurations
from the PMIC SDAM registers.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The SM8550 and X1E80100 platforms now include charge control
functionality in battery management firmware, allowing charging
to stop when the battery reaches a set level and resume when it
drops below another level. To support this in the qcom_battmgr
driver, CHARGE_CONTROL_START/END_THRESHOLD power supply properties
can be added to manage these levels. This results in the battery
power supply properties for SM8550 and X1E80100 differing from
those for SM8350 and SC8280XP. Therefore, separate compatible
entries for SM8550 and X1E80100 are introduced, each with
their own variant definitions as match data.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add state_of_health property to read battery health percentage from
battery management firmware.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add power supply property to get battery internal resistance from
the battery management firmware.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add state_of_health power supply property to represent battery
health percentage.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Some battery drivers provide the ability to export internal resistance
as a parameter. Add internal_resistance power supply property for that
purpose.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Remove redundant condition checks and replace else if with else.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Document active low Charge Enable pin. Battery charging is enabled when
REG01[5:4] = 01 and CE pin = Low. CE pin must be pulled high or low.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Change the return value of match_noXlvl() to return the SATP mode that
will be used, rather than the mode being disabled. This enables unified
logic for return value judgement with the function that obtains mmu-type
from the fdt, avoiding extra conversion. This only changes the naming,
with no functional impact.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250722-satp-from-fdt-v1-1-5ba22218fa5f@pigmoral.tech
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Currently, VF MAC address info is not updated when the MAC address is
configured from VF, and it is not cleared when the VF is removed. This
leads to stale or missing MAC information in the PF, which may cause
incorrect state tracking or inconsistencies when VFs are hot-plugged
or reassigned.
Fix this by:
- storing the VF MAC address in the PF when it is set from VF
- clearing the stored VF MAC address when the VF is removed
This ensures that the PF always has correct VF MAC state.
Fixes: cde29af9e68e ("octeon_ep: add PF-VF mailbox communication")
Signed-off-by: Sathesh B Edara <sedara@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250916133207.21737-1-sedara@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A crash was observed with the following output:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 UID: 0 PID: 2899 Comm: syz.2.399 Not tainted 6.17.0-rc5+ #5 PREEMPT(none)
RIP: 0010:trace_kprobe_create_internal+0x3fc/0x1440 kernel/trace/trace_kprobe.c:911
Call Trace:
<TASK>
trace_kprobe_create_cb+0xa2/0xf0 kernel/trace/trace_kprobe.c:1089
trace_probe_create+0xf1/0x110 kernel/trace/trace_probe.c:2246
dyn_event_create+0x45/0x70 kernel/trace/trace_dynevent.c:128
create_or_delete_trace_kprobe+0x5e/0xc0 kernel/trace/trace_kprobe.c:1107
trace_parse_run_command+0x1a5/0x330 kernel/trace/trace.c:10785
vfs_write+0x2b6/0xd00 fs/read_write.c:684
ksys_write+0x129/0x240 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x5d/0x2d0 arch/x86/entry/syscall_64.c:94
</TASK>
Function kmemdup() may return NULL in trace_kprobe_create_internal(), add
check for it's return value.
Link: https://lore.kernel.org/all/20250916075816.3181175-1-wangliang74@huawei.com/
Fixes: 33b4e38baa03 ("tracing: kprobe-event: Allocate string buffers from heap")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Heiner Kallweit says:
====================
net: phy: remove mdio_board_info support from phylib
Since its introduction in 2017 mdio_board_info has had only two users:
- dsa_loop (still existing)
- arm orion, added in 2017 and removed with fd68572b57f2 ("ARM: orion5x:
remove dsa_chip_data references")
So let's remove usage of mdio_board_info from dsa_loop, then support
for mdio_board_info can be dropped from phylib.
====================
Link: https://patch.msgid.link/4ccf7476-0744-4f6b-aafc-7ba84d15a432@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After having removed mdio_board_info usage from dsa_loop, there's no
user left. So let's drop support for it from phylib.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/01542a2e-05f5-4f13-acef-72632b33b5be@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dsa_loop is the last remaining user of mdio_board_info. Let's remove
using mdio_board_info, so that support for it can be dropped from
phylib.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/da9563a4-8e14-41cf-bfea-cf5f1b58a4b7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The periodic pulse event interrupts are used to register the PPS events
into the system, so it is only applicable to PTP_CLK_REQ_PPS request.
However, these interrupts are mistakenly enabled in PTP_CLK_REQ_PEROUT
request, so fix this error.
Fixes: 671e266835b8 ("ptp: netc: add periodic pulse output support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250915082528.1616361-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
external phy"
This reverts commit da114122b83149d1f1db0586b1d67947b651aa20.
As discussed, the PHY clock should be managed by PHY driver instead
of other driver like dwmac-rk.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/a30a8c97-6b96-45ba-bad7-8a40401babc2@samsung.com
Fixes: da114122b831 ("net: ethernet: stmmac: dwmac-rk: Make the clk_phy could be used for external phy")
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Link: https://patch.msgid.link/0A3F1D1604FEE424+20250916012628.1819-1-kernel@airkyi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a vlan over bond testing to make sure arp/ns target works.
Also change all the configs to mudules.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250916080127.430626-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unlike IPv4, IPv6 routing strictly requires the source address to be valid
on the outgoing interface. If the NS target is set to a remote VLAN interface,
and the source address is also configured on a VLAN over a bond interface,
setting the oif to the bond device will fail to retrieve the correct
destination route.
Fix this by not setting the oif to the bond device when retrieving the NS
target destination. This allows the correct destination device (the VLAN
interface) to be determined, so that bond_verify_device_path can return the
proper VLAN tags for sending NS messages.
Reported-by: David Wilder <wilder@us.ibm.com>
Closes: https://lore.kernel.org/netdev/aGOKggdfjv0cApTO@fedora/
Suggested-by: Jay Vosburgh <jv@jvosburgh.net>
Tested-by: David Wilder <wilder@us.ibm.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250916080127.430626-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RP1 chip has the Cadence GEM block, but wants the tx_clock
to always run at 125MHz, in the same way as sama7g5.
Add the relevant configuration.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://patch.msgid.link/20250916081059.3992108-1-svarbanov@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
ptp: safely cleanup when unregistering a PTP clock
The standard rule in the kernel for unregistering user visible devices
is to unpublish the userspace API before doing any shutdown of the
resources necessary for the operation of the device.
PTP has several issues in this area:
1. ptp_clock_unregister() cancells and destroys work while the PTP
chardev is still published, which gives the opportunity for a
precisely timed user API call to cause a driver to attempt to
queue the aux work.
2. PTP pins are not cleaned up - if userspace has enabled PTP pins,
e.g. for extts, drivers are forced to do cleanup before calling
ptp_clock_unregister() to stop events being forwarded into the
PTP layer. E.g mv88e6xxx cancells its internal tai_event_work
to avoid calling into the PTP clock code with a stale ptp_clock
pointer, but a badly timed userspace EXTTS enable will re-schedule
the tai_event_work.
Simplify the process by ensuring that:
1. we take a referene on the PTP struct device to stop the
ptp_clock structure going away underneath us when we call
posix_clock_unregister().
2. call posix_clock_unregister() to remove the /dev/ptp* device.
3. add additional functionality to disable any PTP EXTTS pins and
PPS event generation that have been configured on this device.
This should shutdown all events coming from PTP clock drivers.
4. cancel the delayed aux_work and destroy the kthread.
5. remove the PPS source.
6. drop the reference on the PTP struct device to allow the
ptp_clock structure to be released.
This is difficult for me to test beyond build testing - on the
Clearfog platform with Marvell PHY PTP, the ethernet PHY is the
primary connectivity, so removing the PHY driver for an in-use
network interface isn't possible.
On the ZII rev B platform, where the DSA switches have the TAI
hardware and where root NFS is used, removal of the DSA switch
module somehow forces the FEC interface _not_ connected to the DSA
switch to lose link, causing the machine to become unresponsive
as its root filesystem vanishes.
====================
Link: https://patch.msgid.link/aMnYIu7RbgfXrmGx@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ordering of ptp_clock_unregister() is not ideal, as the chardev
remains published while state is being torn down, which means userspace
can race with the kernel teardown. There is also no cleanup of enabled
pin settings nor of the internal PPS event, which means enabled events
can still forward into the core, dereferencing a free'd pointer.
Rework the ordering of cleanup in ptp_clock_unregister() so that we
unpublish the posix clock (and user chardev), disable any pins that
have EXTTS events enabled, disable the PPS event, and then clean up
the aux work and PPS source.
This avoids potential use-after-free and races in PTP clock driver
teardown.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # ocelot, sja1105, netdevsim, vclocks
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/E1uydLH-000000061DM-2gcV@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Accurately describe what each call to ptp_disable_pinfunc() is doing,
rather than the misleading comment above the first disable. This helps
to make the code more readable.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/E1uydLC-000000061DG-2BRt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support for platform data from dropped from twl in 4a346a03a63c ("mfd:
twl: Remove platform data support") and board files were dropped even
earlier. There are no in-kernel users of twl4030_keypad_data in the
kernel, and the driver supports configuration via generic device
properties.
Drop support of static platform data from the keypad driver.
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/tica7ol7xwv5tqb7hlkzu6wkiv4quxwrpqv6croe4wfnwvj6wv@4ob6ktqqi3cr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Fix the Kconfig dependencies for PCS_RZN1_MIIC to avoid the unmet direct
dependency warning when enabling DWMAC_RENESAS_GBETH. The PCS driver is
used on multiple Renesas SoCs including RZ/N1, RZ/N2H and RZ/T2H, but the
existing condition only allowed ARCH_RZN1, ARCH_R9A09G077, or
ARCH_R9A09G087. This conflicted with the GBETH/GMAC driver which selects
PCS_RZN1_MIIC under ARCH_RENESAS.
Update the dependency to ARCH_RENESAS || COMPILE_TEST so that the PCS
driver is available on all Renesas platforms.
Fixes: 08f89e42121d ("net: pcs: rzn1-miic: Add RZ/T2H MIIC support")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/aMlgg_QpJOEDGcEA@monster/
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250916162335.3339558-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
