| Age | Commit message (Collapse) | Author |
|---|
|
Stop accessing ns.count directly.
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
And drop ns_free_inum(). Anything common that can be wasted centrally
should be wasted in the new common helper.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Stop accessing ns.count directly.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
alloc_workqueue() users"
Marco Crivellari <marco.crivellari@suse.com> says:
Below is a summary of a discussion about the Workqueue API and cpu isolation
considerations. Details and more information are available here:
"workqueue: Always use wq_select_unbound_cpu() for WORK_CPU_UNBOUND."
https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
=== Current situation: problems ===
Let's consider a nohz_full system with isolated CPUs: wq_unbound_cpumask is
set to the housekeeping CPUs, for !WQ_UNBOUND the local CPU is selected.
This leads to different scenarios if a work item is scheduled on an isolated
CPU where "delay" value is 0 or greater then 0:
schedule_delayed_work(, 0);
This will be handled by __queue_work() that will queue the work item on the
current local (isolated) CPU, while:
schedule_delayed_work(, 1);
Will move the timer on an housekeeping CPU, and schedule the work there.
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
=== Plan and future plans ===
This patchset is the first stone on a refactoring needed in order to
address the points aforementioned; it will have a positive impact also
on the cpu isolation, in the long term, moving away percpu workqueue in
favor to an unbound model.
These are the main steps:
1) API refactoring (that this patch is introducing)
- Make more clear and uniform the system wq names, both per-cpu and
unbound. This to avoid any possible confusion on what should be
used.
- Introduction of WQ_PERCPU: this flag is the complement of WQ_UNBOUND,
introduced in this patchset and used on all the callers that are not
currently using WQ_UNBOUND.
WQ_UNBOUND will be removed in a future release cycle.
Most users don't need to be per-cpu, because they don't have
locality requirements, because of that, a next future step will be
make "unbound" the default behavior.
2) Check who really needs to be per-cpu
- Remove the WQ_PERCPU flag when is not strictly required.
3) Add a new API (prefer local cpu)
- There are users that don't require a local execution, like mentioned
above; despite that, local execution yeld to performance gain.
This new API will prefer the local execution, without requiring it.
=== Introduced Changes by this series ===
1) [P 1-2] Replace use of system_wq and system_unbound_wq
system_wq is a per-CPU workqueue, but his name is not clear.
system_unbound_wq is to be used when locality is not required.
Because of that, system_wq has been renamed in system_percpu_wq, and
system_unbound_wq has been renamed in system_dfl_wq.
2) [P 3] add WQ_PERCPU to remaining alloc_workqueue() users
Every alloc_workqueue() caller should use one among WQ_PERCPU or
WQ_UNBOUND. This is actually enforced warning if both or none of them
are present at the same time.
WQ_UNBOUND will be removed in a next release cycle.
* patches from https://lore.kernel.org/20250916082906.77439-1-marco.crivellari@suse.com:
fs: WQ_PERCPU added to alloc_workqueue users
fs: replace use of system_wq with system_percpu_wq
fs: replace use of system_unbound_wq with system_dfl_wq
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch adds a new WQ_PERCPU flag to all the fs subsystem users to
explicitly request the use of the per-CPU behavior. Both flags coexist
for one release cycle to allow callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/20250916082906.77439-4-marco.crivellari@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_wq is a per-CPU worqueue, yet nothing in its name tells about that
CPU affinity constraint, which is very often not required by users.
Make it clear by adding a system_percpu_wq to all the fs subsystem.
The old wq will be kept for a few release cylces.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/20250916082906.77439-3-marco.crivellari@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/20250916082906.77439-2-marco.crivellari@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Merge series from Dharma Balasubiramani <dharma.b@microchip.com>:
This patch series adds support for SAM9X7 and sama7d65 QSPI controller
along with the SoC-specific capabilities.
|
|
Merge series from Haibo Chen <haibo.chen@nxp.com>:
this patch set add DTR mode support for flexspi.
For DTR mode, flexspi only support 8D-8D-8D mode.
Patch 1~2 extract nxp_fspi_dll_override(), prepare for adding the DTR mode.
in nor suspend, it will disable DTR mode, and enable DTR mode back
in nor resume. this require the flexspi driver has the ability to
set back to dll override mode in STR mode when clock rate < 100MHz.
Patch 3 Add the DDR LUT command support. flexspi use LUT command to handle
the dtr/str mode.
Patch 4 add the logic of sample clock source selection for STR/DTR mode
STR use the default mode 0, sample based on the internal dummy pad.
DTR use the mode 3, sample based on the external DQS pad, so this
board and device connect the DQS pad.
adjust the clock rate for DTR mode, when detect the DDR LUT command,
flexspi will automatically div 2 of the root clock and output to device.
Patch 5 finally add the DTR support in default after the upper 4 patches's
prepareation. Since lx2160a do not implement DQS pad, so can't support
this DTR mode.
|
|
In create_sdw_dailink() check that sof_end->codec_info->add_sidecar
is not NULL before calling it.
The original code assumed that if include_sidecar is true, the codec
on that link has an add_sidecar callback. But there could be other
codecs on the same link that do not have an add_sidecar callback.
Fixes: da5244180281 ("ASoC: Intel: sof_sdw: Add callbacks to register sidecar devices")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250919140235.1071941-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix typo in PPE_IP_PROTO_CHK_IPV4_MASK and PPE_IP_PROTO_CHK_IPV6_MASK
register mask definitions. This is not a real problem since this
register is not actually used in the current codebase.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
EEE speed down means speed down MAC MCU clock. It is not from spec.
It is kind of Realtek specific power saving feature. But enable it
may cause some issues, like packet drop or interrupt loss. Different
hardware may have different issues.
EEE speed down ratio (mac ocp 0xe056[7:4]) is used to set EEE speed
down rate. The larger this value is, the more power can save. But it
actually save less power then we expected. And, as mentioned above,
will impact compatibility. So set it to 1 (mac ocp 0xe056[7:4] = 0)
, which means not to speed down, to improve compatibility.
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20250918023425.3463-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove duplicated definition of NUM_FIXED_PHYS. This was a leftover from
41357bc7b94b ("net: dsa: dsa_loop: remove usage of mdio_board_info").
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/67a3b7df-c967-4431-86b6-a836dc46a4ef@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a first MPTCP connection gets successfully established after a
blackhole period, 'active_disable_times' was supposed to be reset when
this connection was done via any non-loopback interfaces.
Unfortunately, the opposite condition was checked: only reset when the
connection was established via a loopback interface. Fixing this by
simply looking at the opposite.
This is similar to what is done with TCP FastOpen, see
tcp_fastopen_active_disable_ofo_check().
This patch is a follow-up of a previous discussion linked to commit
893c49a78d9f ("mptcp: Use __sk_dst_get() and dst_dev_rcu() in
mptcp_active_enable()."), see [1].
Fixes: 27069e7cb3d1 ("mptcp: disable active MPTCP in case of blackhole")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/4209a283-8822-47bd-95b7-87e96d9b7ea3@kernel.org [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250918-net-next-mptcp-blackhole-reset-loopback-v1-1-bf5818326639@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The page_pool_create() function never returns NULL, it returns
error pointers. Update the check to match.
Fixes: 73f37a7e1993 ("hinic3: Queue pair resource initialization")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/aMvUywhgbmO1kH3Z@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use __sk_dst_get() and dst_dev_rcu(), because dst->dev could
be changed under us.
Fixes: 6b46ca260e22 ("net: psp: add socket security association code")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Tested-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250918115238.237475-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The menuconfig entries to configure various architectural features are
all formatted as "ARMvx.y architecture features" with the unusual
exception of 9.4, which omits the "ARM" prefix.
Add the "ARM" prefix to the menuconfig entry for the ARMv9.4
architectural features.
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There are more failure conditions now so 400 iterations is not enough pass
them all, up it to 1000. The limit exists so it doesn't infinite loop.
Link: https://patch.msgid.link/r/3-v1-02cd136829df+31-iommufd_syz_fput_jgg@nvidia.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
If something holds a refcount then it is at risk of UAFing. For abort
paths we expect the caller to never share the object with a parallel
thread and to clean up any refcounts it obtained on its own.
Add the missing dec inside iommufd_hwpt_paging_alloc() during error unwind
by making iommufd_hw_pagetable_attach/detach() proper pairs.
Link: https://patch.msgid.link/r/2-v1-02cd136829df+31-iommufd_syz_fput_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
fput() doesn't actually call file_operations release() synchronously, it
puts the file on a work queue and it will be released eventually.
This is normally fine, except for iommufd the file and the iommufd_object
are tied to gether. The file has the object as it's private_data and holds
a users refcount, while the object is expected to remain alive as long as
the file is.
When the allocation of a new object aborts before installing the file it
will fput() the file and then go on to immediately kfree() the obj. This
causes a UAF once the workqueue completes the fput() and tries to
decrement the users refcount.
Fix this by putting the core code in charge of the file lifetime, and call
__fput_sync() during abort to ensure that release() is called before
kfree. __fput_sync() is a bit too tricky to open code in all the object
implementations. Instead the objects tell the core code where the file
pointer is and the core will take care of the life cycle.
If the object is successfully allocated then the file will hold a users
refcount and the iommufd_object cannot be destroyed.
It is worth noting that close(); ioctl(IOMMU_DESTROY); doesn't have an
issue because close() is already using a synchronous version of fput().
The UAF looks like this:
BUG: KASAN: slab-use-after-free in iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376
Write of size 4 at addr ffff888059c97804 by task syz.0.46/6164
CPU: 0 UID: 0 PID: 6164 Comm: syz.0.46 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcd/0x630 mm/kasan/report.c:482
kasan_report+0xe0/0x110 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x100/0x1b0 mm/kasan/generic.c:189
instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:400 [inline]
__refcount_dec include/linux/refcount.h:455 [inline]
refcount_dec include/linux/refcount.h:476 [inline]
iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376
__fput+0x402/0xb70 fs/file_table.c:468
task_work_run+0x14d/0x240 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43
exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline]
do_syscall_64+0x41c/0x4c0 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Link: https://patch.msgid.link/r/1-v1-02cd136829df+31-iommufd_syz_fput_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: 07838f7fd529 ("iommufd: Add iommufd fault object")
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nirmoy Das <nirmoyd@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reported-by: syzbot+80620e2d0d0a33b09f93@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/68c8583d.050a0220.2ff435.03a2.GAE@google.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The owner object of the imap can be destroyed while the imap remains in
the mtree. So access to the imap pointer without holding locks is racy
with destruction.
The imap is safe to access outside the lock once a users refcount is
obtained, the owner object cannot start destruction until users is 0.
Thus the users refcount should not be obtained at the end of
iommufd_fops_mmap() but instead inside the mtree lock held around the
mtree_load(). Move the refcount there and use refcount_inc_not_zero() as
we can have a 0 refcount inside the mtree during destruction races.
Link: https://patch.msgid.link/r/0-v1-e6faace50971+3cc-iommufd_mmap_fix_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: 56e9a0d8e53f ("iommufd: Add mmap interface")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
SPE data source filtering (SPE_FEAT_FDS) adds a new register
PMSDSFR_EL1, add the trap configs for it. PMSNEVFR_EL1 was also missing
its VNCR offset so add it along with PMSDSFR_EL1.
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Merge series from Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>:
All the Qualcomm WCD codecs and WCD based codecs have lots of code in
common, resulting in lot of duplicate code.
This series is an attempt to clean some of this by moving the common
code to wcd-common library or to soundwire helper functions.
Currently I have done cleanups for 4 codecs wcd934x, wcd937x, wcd938x
and wcd939x, however any new Qualcomm codecs can avoid this duplication
by using the wcd-common library.
I have also added two helpers of_sdw_find_device_by_node() and
sdw_slave_get_current_bank() in soundwire layer for the codecs to use them,
this series was already acked by Soundwire maintainer Vinod.
As original cleanup series was depending on the new soundwire interfaces
I have combined both the series as they are cleaning up code
duplications.
As am touching the same codec drivers, 2 bug fixes are also added at the
start of the series.
There is still lot of code that is duplicate, but this is just a
starting point for such cleanups.
I have tested this on T14s, any testing is appreciated.
|
|
If a query chain forms a cycle, it'll be looping in the kernel until the
process is killed. It might be fine as any such mistake can be easily
uncovered during testing, but it's still nicer to let it break out of
the syscall if it executed too many queries.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the query chain forms a cycle, the interface will loop indefinitely.
Make sure it handles fatal signals, so the user can kill the process and
hence break out of the infinite loop.
Fixes: c265ae75f900 ("io_uring: introduce io_uring querying")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The changes to the debug architecture up to v8.8 are concerned with
external debug, which of course has no direct impact on VMs. Raise the
feature limit and document what's preventing us from raising it further.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
While KVM does not expose IMPDEF features to VMs, FEAT_TIDCP1 is an
architecturally-defined EL1 trap of a particular sysreg encoding range.
Furthermore, KVM already advertises this feature to non-NV VMs.
As there is no interaction with EL2 traps, expose the feature.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
FEAT_SpecSEI is an informational feature describing whether speculative
loads may generate SErrors. Since there are already cases where KVM
reinjects an SError into the VM it is already possible this may happen
due to a speculative load within the VM.
Stop hiding the feature from NV-enabled VMs.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM now handles HCR_EL2.{TWEDEn,TWEDEL} correctly when computing the
effective HCR for a nested context. Advertise the feature.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Ignore the guest hypervisor's configured TWE delay if it hasn't actually
requested WFE traps. Otherwise, OR'ing these fields into the effective
HCR when the guest sets TWE is safe as KVM doesn't use FEAT_TWED and
leaves the fields initialized to 0.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
FEAT_AFP doesn't intersect with any EL2 trap behavior, expose to
NV-enabled VMs.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The exact wording of the restrictions on branch prediction due to
FEAT_ECBHB in DDI0487L.b is as follows:
When FEAT_ECBHB is implemented, the branch history information created
in a context before an exception to a higher Exception level using
AArch64 cannot be used by code before that exception to exploitatively
control the execution of any indirect branches in code in a different
context after the exception.
While vEL2 and EL1 are multiplexed at EL1, they exist in different
hardware-described contexts as KVM uses different stage-2 MMUs to
represent the corresponding translation regimes. Additionally, exception
entries into vEL2 always imply a hardware exception entry into literal EL2
for the emulated regime change.
Given all of this, and the fact that FEAT_ECBHB places no limitation on
the EL of the protected context after the exception, we can claim
FEAT_ECBHB on supporting hardware.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM already supports FEAT_RASv1p1 for NV-enabled VMs but only when
advertised through the canonical field. Stop masking the silly frac
field to expose the feature on systems without FEAT_DF.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The supporting infrastructure in KVM's abort injection code was merged a
while ago, but the author (me!) forgot to relax the NV limitation when
FEAT_DF2 got exposed to non-NV VMs. Fix it.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
ID_AA64DFR0_EL1.DoubleLock is one of those annoying signed feature
fields where a non-negative value implies that a feature is implemented
and a negative value implies that it is not. While the intention of
masking this field was likely to hide the feature, KVM actually
advertises it, even on unsupporting hardware.
Remove FEAT_DoubleLock from the mask, making the NI value visible to the
VM. Take care to accept the old, incorrect values for this field as
we've lied to userspace.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Consistently use denylisting of features such that the limitations of
KVM's nested implementation are explicitly documented (rather than
implied).
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add support for OPUS module, OPUS format ID, media format payload struct
and make it all recognizable by audioreach compress playback path.
At this moment this only supports raw or plain OPUS packets not
encapsulated in container (for instance OGG container). For this usecase
each OPUS packet needs to be prepended with 4-bytes long length field
which is expected to be done by userspace applications. This is
Qualcomm DSP specific requirement.
Cc: Annemarie Porter <annemari@quicinc.com>
Cc: Vinod Koul <vkoul@kernel.org>
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Since addition of raw opus codec support we need to update
compress API minor version by one.
Bump the SNDRV_COMPRESS_VERSION to 0.4.1.
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Adds a raw opus codec define and raw opus decoder structs.
This is for raw OPUS packets not packed in any type of container
(for instance OGG container). The decoder struct fields are
taken from corresponding RFC document: RFC 7845 Section 5.
Cc: Srinivas Kandagatla <srini@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>
Co-developed-by: Annemarie Porter <annemari@quicinc.com>
Signed-off-by: Annemarie Porter <annemari@quicinc.com>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Assert that the EL2 features {HCX, TWED} of ID_AA64MMFR1_EL1 are writable
from userspace. They are only allowed to be downgraded in userspace.
Signed-off-by: Jinqian Yang <yangjinqian1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Allow userspace to downgrade {HCX, TWED} in ID_AA64MMFR1_EL1. Userspace can
only change the value from high to low.
Signed-off-by: Jinqian Yang <yangjinqian1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
We would like to hide struct snd_soc_dapm_context from driver. So we need
cleanup code first. These are preparation for it.
|
|
While MDCR_EL2 cannot be RES0, convert it to the same infrastructure
anyway, as it make things cleaner.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
While SCTLR_EL1 cannot be RES0, convert it to the same infrastructure
anyway, as it make things cleaner.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Enforce that TCR2_EL2 are RES0 when FEAT_TCR2 isn't present.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Enforce that SCTLR2_EL{1,2} are RES0 when FEAT_SCTLR2 isn't present.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
While HCR_EL2 is unlikely to ever be RES0 (at least when NV is on),
but consistency doesn't hurt, and it can be described in the same
way as the other registers.
Convert it over to the new RES0-computing infrastructure.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add the dependency between the HCRX_EL2 register and FEAT_HCX.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Similarly to the FEAT_FGT registers, add the dependency between
the registers and the controlling feature.
WHile we're at it, add the missing checks for the RES0 vs valid
bit overlap.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
