| Age | Commit message (Collapse) | Author |
|---|
|
When UBLK_F_BUF_REG_OFF_DAEMON was added, we missed updating kublk's
feat_map, which results in the feature being reported as "unknown." Add
UBLK_F_BUF_REG_OFF_DAEMON to feat_map to fix this.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Simplify the definition of feat_map by introducing a helper macro
FEAT_NAME to avoid having to type the feature name twice. As a side
effect, this changes the names in the feature list to be the full macro
name instead of the abbreviated names that were used before, but this is
a good change for clarity.
Using the full feature macro names ruins the alignment of the output, so
change the output format to put each feature's hex value before its
name, as this is easier to align nicely. The output now looks as
follows:
root# ./kublk features
ublk_drv features: 0x7fff
0x1 : UBLK_F_SUPPORT_ZERO_COPY
0x2 : UBLK_F_URING_CMD_COMP_IN_TASK
0x4 : UBLK_F_NEED_GET_DATA
0x8 : UBLK_F_USER_RECOVERY
0x10 : UBLK_F_USER_RECOVERY_REISSUE
0x20 : UBLK_F_UNPRIVILEGED_DEV
0x40 : UBLK_F_CMD_IOCTL_ENCODE
0x80 : UBLK_F_USER_COPY
0x100 : UBLK_F_ZONED
0x200 : UBLK_F_USER_RECOVERY_FAIL_IO
0x400 : UBLK_F_UPDATE_SIZE
0x800 : UBLK_F_AUTO_BUF_REG
0x1000 : UBLK_F_QUIESCE
0x2000 : UBLK_F_PER_IO_DAEMON
0x4000 : unknown
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Vincent Mailhol <mailhol@kernel.org> says:
Four drivers, namely etas_es58x, hi311x, sun4i_can and mcba_usb forgot
to populate their net_device_ops->ndo_change_mtu(). Because of that,
the user is free to configure any MTU on these interfaces.
This can be abused by an attacker who could craft some skbs and send
them through PF_PACKET to perform a buffer overflow of up to 247 bytes
in each of these drivers.
This series contains four patches, one for each of the drivers, to add
the missing ndo_change_mtu() callback. The descriptions contain
detailed explanations of how the buffer overflow could be triggered.
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-0-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the mcba_usb driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, mcba_usb_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN frame.
This can result in a buffer overflow. The driver will consume cf->len
as-is with no further checks on these lines:
usb_msg.dlc = cf->len;
memcpy(usb_msg.data, cf->data, usb_msg.dlc);
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow.
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-4-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the sun4i_can driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, sun4ican_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN frame.
This can result in a buffer overflow. The driver will consume cf->len
as-is with no further checks on this line:
dlc = cf->len;
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs a
couple line below when doing:
for (i = 0; i < dlc; i++)
writel(cf->data[i], priv->base + (dreg + i * 4));
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow.
Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-3-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the sun4i_can driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, hi3110_hard_start_xmit() receives a CAN XL frame which it is
not able to correctly handle and will thus misinterpret it as a CAN
frame. The driver will consume frame->len as-is with no further
checks.
This can result in a buffer overflow later on in hi3110_hw_tx() on
this line:
memcpy(buf + HI3110_FIFO_EXT_DATA_OFF,
frame->data, frame->len);
Here, frame->len corresponds to the flags field of the CAN XL frame.
In our previous example, we set canxl_frame->flags to 0xff. Because
the maximum expected length is 8, a buffer overflow of 247 bytes
occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow.
Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-2-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the etas_es58x driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL));
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, es58x_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN(FD)
frame.
This can result in a buffer overflow. For example, using the es581.4
variant, the frame will be dispatched to es581_4_tx_can_msg(), go
through the last check at the beginning of this function:
if (can_is_canfd_skb(skb))
return -EMSGSIZE;
and reach this line:
memcpy(tx_can_msg->data, cf->data, cf->len);
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU or
CANFD_MTU (depending on the device capabilities). By fixing the root
cause, this prevents the buffer overflow.
Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-1-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Driver configures register to choose controller mode before
setting all channels to reset mode leading to failure.
The patch corrects operation of mode setting.
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Tranh Ha <tranh.ha.xb@renesas.com>
Link: https://patch.msgid.link/TYWPR01MB87434739F83E27EDCD23DF44B416A@TYWPR01MB8743.jpnprd01.prod.outlook.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
interface was enabled
This issue is similar to the vulnerability in the `mcp251x` driver,
which was fixed in commit 03c427147b2d ("can: mcp251x: fix resume from
sleep before interface was brought up").
In the `hi311x` driver, when the device resumes from sleep, the driver
schedules `priv->restart_work`. However, if the network interface was
not previously enabled, the `priv->wq` (workqueue) is not allocated and
initialized, leading to a null pointer dereference.
To fix this, we move the allocation and initialization of the workqueue
from the `hi3110_open` function to the `hi3110_can_probe` function.
This ensures that the workqueue is properly initialized before it is
used during device resume. And added logic to destroy the workqueue
in the error handling paths of `hi3110_can_probe` and in the
`hi3110_can_remove` function to prevent resource leaks.
Signed-off-by: Chen Yufeng <chenyufeng@iie.ac.cn>
Link: https://patch.msgid.link/20250911150820.250-1-chenyufeng@iie.ac.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a NULL pointer dereference in ccp and a couple of bugs in
the af_alg interface"
* tag 'v6.17-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg
crypto: af_alg - Set merge to zero early in af_alg_sendmsg
crypto: ccp - Always pass in an error pointer to __sev_platform_shutdown_locked()
|
|
The commit c6366739804f ("cpuset: refactor cpus_allowed_validate_change")
inadvertently removed the error return when cpus_allowed_validate_change()
fails. This patch restores the proper error handling by returning retval
when the validation check fails.
Fixes: c6366739804f ("cpuset: refactor cpus_allowed_validate_change")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
A previous patch fixed a bug where new_prs should be assigned before
checking housekeeping conflicts. This patch addresses another potential
issue: the nocpu error check currently uses the xcpus which is not updated.
Although no issue has been observed so far, the check should be performed
using the new effective exclusive cpus.
The comment has been removed because the function returns an error if
nocpu checking fails, which is unrelated to the parent.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The 'isolcpus' parameter specified at boot time can be assigned to an
isolated partition. While it is valid put the 'isolcpus' in an isolated
partition, attempting to change a member cpuset to an isolated partition
will fail if the cpuset contains any 'isolcpus'.
For example, the system boots with 'isolcpus=9', and the following
configuration works correctly:
# cd /sys/fs/cgroup/
# mkdir test
# echo 1 > test/cpuset.cpus
# echo isolated > test/cpuset.cpus.partition
# cat test/cpuset.cpus.partition
isolated
# echo 9 > test/cpuset.cpus
# cat test/cpuset.cpus.partition
isolated
# cat test/cpuset.cpus
9
However, the following steps to convert a member cpuset to an isolated
partition will fail:
# cd /sys/fs/cgroup/
# mkdir test
# echo 9 > test/cpuset.cpus
# echo isolated > test/cpuset.cpus.partition
# cat test/cpuset.cpus.partition
isolated invalid (partition config conflicts with housekeeping setup)
The issue occurs because the new partition state (new_prs) is used for
validation against housekeeping constraints before it has been properly
updated. To resolve this, move the assignment of new_prs before the
housekeeping validation check when enabling a root partition.
Fixes: 4a74e418881f ("cgroup/cpuset: Check partition conflict with housekeeping setup")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Manually-arranged toctree comment in cgroup v2 documentation is a rather
out-of-sync with actual contents: a few sections are missing and/or
named differently.
Sync the toctree.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add ERRATA_MIPS and ERRATA_MIPS_P8700_PAUSE_OPCODE configs.
Handle errata for the MIPS PAUSE instruction.
Signed-off-by: Djordje Todorovic <djordje.todorovic@htecgroup.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Signed-off-by: Raj Vishwanathan4 <rvishwanathan@mips.com>
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250724-p8700-pause-v5-7-a6cbbe1c3412@htecgroup.com
[pjw@kernel.org: updated to apply and compile; fixed a checkpatch issue]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Document support for MIPS vendor extensions using the key
"RISCV_HWPROBE_KEY_VENDOR_EXT_MIPS_0" and xmipsexectl vendor extension
using the key "RISCV_HWPROBE_VENDOR_EXT_XMIPSEXECTL".
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250724-p8700-pause-v5-5-a6cbbe1c3412@htecgroup.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Add a new hwprobe key "RISCV_HWPROBE_KEY_VENDOR_EXT_MIPS_0" which allows
userspace to probe for the new xmipsexectl vendor extension.
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250724-p8700-pause-v5-4-a6cbbe1c3412@htecgroup.com
[pjw@kernel.org: fixed some checkpatch issues]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Add xmipsexectl instruction opcodes. This includes the MIPS.PAUSE,
MIPS.EHB, and MIPS.IHB instructions.
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250724-p8700-pause-v5-3-a6cbbe1c3412@htecgroup.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
'bpf-replace-path-sensitive-with-path-insensitive-live-stack-analysis'
Eduard Zingerman says:
====================
bpf: replace path-sensitive with path-insensitive live stack analysis
Consider the following program, assuming checkpoint is created for a
state at instruction (3):
1: call bpf_get_prandom_u32()
2: *(u64 *)(r10 - 8) = 42
-- checkpoint #1 --
3: if r0 != 0 goto +1
4: exit;
5: r0 = *(u64 *)(r10 - 8)
6: exit
The verifier processes this program by exploring two paths:
- 1 -> 2 -> 3 -> 4
- 1 -> 2 -> 3 -> 5 -> 6
When instruction (5) is processed, the current liveness tracking
mechanism moves up the register parent links and records a "read" mark
for stack slot -8 at checkpoint #1, stopping because of the "write"
mark recorded at instruction (2).
This patch set replaces the existing liveness tracking mechanism with
a path-insensitive data flow analysis. The program above is processed
as follows:
- a data structure representing live stack slots for
instructions 1-6 in frame #0 is allocated;
- when instruction (2) is processed, record that slot -8 is written at
instruction (2) in frame #0;
- when instruction (5) is processed, record that slot -8 is read at
instruction (5) in frame #0;
- when instruction (6) is processed, propagate read mark for slot -8
up the control flow graph to instructions 3 and 2.
The key difference is that the new mechanism operates on a control
flow graph and associates read and write marks with pairs of (call
chain, instruction index). In contrast, the old mechanism operates on
verifier states and register parent links, associating read and write
marks with verifier states.
Motivation
==========
As it stands, this patch set makes liveness tracking slightly less
precise, as it no longer distinguishes individual program paths taken
by the verifier during symbolic execution.
See the "Impact on verification performance" section for details.
However, this change is intended as a stepping stone toward the
following goals:
- Short term, integrate precision tracking into liveness analysis and
remove the following code:
- verifier backedge states accumulation in is_state_visited();
- most of the logic for precision tracking;
- jump history tracking.
- Long term, help with more efficient loop verification handling.
Why integrating precision tracking?
-----------------------------------
In a sense, precision tracking is very similar to liveness tracking.
The data flow equations for liveness tracking look as follows:
live_after =
U [state[s].live_before for s in insn_successors(i)]
state[i].live_before =
(live_after / state[i].must_write) U state[i].may_read
While data flow equations for precision tracking look as follows:
precise_after =
U [state[s].precise_before for s in insn_successors(i)]
// if some of the instruction outputs are precise,
// assume its inputs to be precise
induced_precise =
⎧ state[i].may_read if (state[i].may_write ∩ precise_after) ≠ ∅
⎨
⎩ ∅ otherwise
state[i].precise_before =
(precise_after / state[i].must_write) ∩ induced_precise
Where:
- `may_read` set represents a union of all possibly read slots
(any slot in `may_read` set might be by the instruction);
- `must_write` set represents an intersection of all possibly written slots
(any slot in `must_write` set is guaranteed to be written by the instruction).
- `may_write` set represents a union of all possibly written slots
(any slot in `may_write` set might be written by the instruction).
This means that precision tracking can be implemented as a logical
extension of liveness tracking:
- track registers as well as stack slots;
- add bit masks to represent `precise_before` and `may_write`;
- add above equations for `precise_before` computation;
- (linked registers require some additional consideration).
Such extension would allow removal of:
- precision propagation logic in verifier.c:
- backtrack_insn()
- mark_chain_precision()
- propagate_{precision,backedges}()
- push_jmp_history() and related data structures, which are only used
by precision tracking;
- add_scc_backedge() and related backedge state accumulation in
is_state_visited(), superseded by per-callchain function state
accumulated by liveness analysis.
The hope here is that unifying liveness and precision tracking will
reduce overall amount of code and make it easier to reason about.
How this helps with loops?
--------------------------
As it stands, this patch set shares the same deficiency as the current
liveness tracking mechanism. Liveness marks on stack slots cannot be
used to prune states when processing iterator-based loops:
- such states still have branches to be explored;
- meaning that not all stack slot reads have been discovered.
For example:
1: while(iter_next()) {
2: if (...)
3: r0 = *(u64 *)(r10 - 8)
4: if (...)
5: r0 = *(u64 *)(r10 - 16)
6: ...
7: }
For any checkpoint state created at instruction (1), it is only
possible to rely on read marks for slots fp[-8] and fp[-16] once all
child states of (1) have been explored. Thus, when the verifier
transitions from (7) to (1), it cannot rely on read marks.
However, sacrificing path-sensitivity makes it possible to run
analysis defined in this patch set before main verification pass,
if estimates for value ranges are available.
E.g. for the following program:
1: while(iter_next()) {
2: r0 = r10
3: r0 += r2
4: r0 = *(u64 *)(r2 + 0)
5: ...
6: }
If an estimate for `r2` range is available before the main
verification pass, it can be used to populate read marks at
instruction (4) and run the liveness analysis. Thus making
conservative liveness information available during loops verification.
Such estimates can be provided by some form of value range analysis.
Value range analysis is also necessary to address loop verification
from another angle: computing boundaries for loop induction variables
and iteration counts.
The hope here is that the new liveness tracking mechanism will support
the broader goal of making loop verification more efficient.
Validation
==========
The change was tested on three program sets:
- bpf selftests
- sched_ext
- Meta's internal set of programs
Commit [#8] enables a special mode where both the current and new
liveness analyses are enabled simultaneously. This mode signals an
error if the new algorithm considers a stack slot dead while the
current algorithm assumes it is alive. This mode was very useful for
debugging. At the time of posting, no such errors have been reported
for the above program sets.
[#8] "bpf: signal error if old liveness is more conservative than new"
Impact on memory consumption
============================
Debug patch [1] extends the kernel and veristat to count the amount of
memory allocated for storing analysis data. This patch is not included
in the submission. The maximal observed impact for the above program
sets is 2.6Mb.
Data below is shown in bytes.
For bpf selftests top 5 consumers look as follows:
File Program liveness mem
----------------------- ---------------- ------------
pyperf180.bpf.o on_event 2629740
pyperf600.bpf.o on_event 2287662
pyperf100.bpf.o on_event 1427022
test_verif_scale3.bpf.o balancer_ingress 1121283
pyperf_subprogs.bpf.o on_event 756900
For sched_ext top 5 consumers loog as follows:
File Program liveness mem
--------- ------------------------------- ------------
bpf.bpf.o lavd_enqueue 164686
bpf.bpf.o lavd_select_cpu 157393
bpf.bpf.o layered_enqueue 154817
bpf.bpf.o lavd_init 127865
bpf.bpf.o layered_dispatch 110129
For Meta's internal set of programs top consumer is 1Mb.
[1] https://github.com/kernel-patches/bpf/commit/085588e787b7998a296eb320666897d80bca7c08
Impact on verification performance
==================================
Veristat results below are reported using
`-f insns_pct>1 -f !insns<500` filter and -t option
(BPF_F_TEST_STATE_FREQ flag).
master vs patch-set, selftests (out of ~4K programs)
----------------------------------------------------
File Program Insns (A) Insns (B) Insns (DIFF)
-------------------------------- -------------------------------------- --------- --------- ---------------
cpumask_success.bpf.o test_global_mask_nested_deep_array_rcu 1622 1655 +33 (+2.03%)
strobemeta_bpf_loop.bpf.o on_event 2163 2684 +521 (+24.09%)
test_cls_redirect.bpf.o cls_redirect 36001 42515 +6514 (+18.09%)
test_cls_redirect_dynptr.bpf.o cls_redirect 2299 2339 +40 (+1.74%)
test_cls_redirect_subprogs.bpf.o cls_redirect 69545 78497 +8952 (+12.87%)
test_l4lb_noinline.bpf.o balancer_ingress 2993 3084 +91 (+3.04%)
test_xdp_noinline.bpf.o balancer_ingress_v4 3539 3616 +77 (+2.18%)
test_xdp_noinline.bpf.o balancer_ingress_v6 3608 3685 +77 (+2.13%)
master vs patch-set, sched_ext (out of 148 programs)
----------------------------------------------------
File Program Insns (A) Insns (B) Insns (DIFF)
--------- ---------------- --------- --------- ---------------
bpf.bpf.o chaos_dispatch 2257 2287 +30 (+1.33%)
bpf.bpf.o lavd_enqueue 20735 22101 +1366 (+6.59%)
bpf.bpf.o lavd_select_cpu 22100 24409 +2309 (+10.45%)
bpf.bpf.o layered_dispatch 25051 25606 +555 (+2.22%)
bpf.bpf.o p2dq_dispatch 961 990 +29 (+3.02%)
bpf.bpf.o rusty_quiescent 526 534 +8 (+1.52%)
bpf.bpf.o rusty_runnable 541 547 +6 (+1.11%)
Perf report
===========
In relative terms, the analysis does not consume much CPU time.
For example, here is a perf report collected for pyperf180 selftest:
# Children Self Command Shared Object Symbol
# ........ ........ ........ .................... ........................................
...
1.22% 1.22% veristat [kernel.kallsyms] [k] bpf_update_live_stack
...
Changelog
=========
v1: https://lore.kernel.org/bpf/20250911010437.2779173-1-eddyz87@gmail.com/T/
v1 -> v2:
- compute_postorder() fixed to handle jumps with offset -1 (syzbot).
- is_state_visited() in patch #9 fixed access to uninitialized `err`
(kernel test robot, Dan Carpenter).
- Selftests added.
- Fixed bug with write marks propagation from callee to caller,
see verifier_live_stack.c:caller_stack_write() test case.
- Added a patch for __not_msg() annotation for test_loader based
tests.
v2: https://lore.kernel.org/bpf/20250918-callchain-sensitive-liveness-v2-0-214ed2653eee@gmail.com/
v2 -> v3:
- Added __diag_ignore_all("-Woverride-init", ...) in liveness.c for
bpf_insn_successors() (suggested by Alexei).
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
====================
Link: https://patch.msgid.link/20250918-callchain-sensitive-liveness-v3-0-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
- simple propagation of read/write marks;
- joining read/write marks from conditional branches;
- avoid must_write marks in when same instruction accesses different
stack offsets on different execution paths;
- avoid must_write marks in case same instruction accesses stack
and non-stack pointers on different execution paths;
- read/write marks propagation to outer stack frame;
- independent read marks for different callchains ending with the same
function;
- bpf_calls_callback() dependent logic in
liveness.c:bpf_stack_slot_alive().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-12-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds tags __not_msg(<msg>) and __not_msg_unpriv(<msg>).
Test fails if <msg> is found in verifier log.
If __msg_not() is situated between __msg() tags framework matches
__msg() tags first, and then checks that <msg> is not present in a
portion of a log between bracketing __msg() tags.
__msg_not() tags bracketed by a same __msg() group are effectively
unordered.
The idea is borrowed from LLVM's CheckFile with its CHECK-NOT syntax.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-11-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Converting bpf_insn_successors() to use lookup table makes it ~1.5
times faster.
Also remove unnecessary conditionals:
- `idx + 1 < prog->len` is unnecessary because after check_cfg() all
jump targets are guaranteed to be within a program;
- `i == 0 || succ[0] != dst` is unnecessary because any client of
bpf_insn_successors() can handle duplicate edges:
- compute_live_registers()
- compute_scc()
Moving bpf_insn_successors() to liveness.c allows its inlining in
liveness.c:__update_stack_liveness().
Such inlining speeds up __update_stack_liveness() by ~40%.
bpf_insn_successors() is used in both verifier.c and liveness.c.
perf shows such move does not negatively impact users in verifier.c,
as these are executed only once before main varification pass.
Unlike __update_stack_liveness() which can be triggered multiple
times.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-10-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Remove register chain based liveness tracking:
- struct bpf_reg_state->{parent,live} fields are no longer needed;
- REG_LIVE_WRITTEN marks are superseded by bpf_mark_stack_write()
calls;
- mark_reg_read() calls are superseded by bpf_mark_stack_read();
- log.c:print_liveness() is superseded by logging in liveness.c;
- propagate_liveness() is superseded by bpf_update_live_stack();
- no need to establish register chains in is_state_visited() anymore;
- fix a bunch of tests expecting "_w" suffixes in verifier log
messages.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-9-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Unlike the new algorithm, register chain based liveness tracking is
fully path sensitive, and thus should be strictly more accurate.
Validate the new algorithm by signaling an error whenever it considers
a stack slot dead while the old algorithm considers it alive.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-8-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Allocate analysis instance:
- Add bpf_stack_liveness_{init,free}() calls to bpf_check().
Notify the instance about any stack reads and writes:
- Add bpf_mark_stack_write() call at every location where
REG_LIVE_WRITTEN is recorded for a stack slot.
- Add bpf_mark_stack_read() call at every location mark_reg_read() is
called.
- Both bpf_mark_stack_{read,write}() rely on
env->liveness->cur_instance callchain being in sync with
env->cur_state. It is possible to update env->liveness->cur_instance
every time a mark read/write is called, but that costs a hash table
lookup and is noticeable in the performance profile. Hence, manually
reset env->liveness->cur_instance whenever the verifier changes
env->cur_state call stack:
- call bpf_reset_live_stack_callchain() when the verifier enters a
subprogram;
- call bpf_update_live_stack() when the verifier exits a subprogram
(it implies the reset).
Make sure bpf_update_live_stack() is called for a callchain before
issuing liveness queries. And make sure that bpf_update_live_stack()
is called for any callee callchain first:
- Add bpf_update_live_stack() call at every location that processes
BPF_EXIT:
- exit from a subprogram;
- before pop_stack() call.
This makes sure that bpf_update_live_stack() is called for callee
callchains before caller callchains.
Make sure must_write marks are set to zero for instructions that
do not always access the stack:
- Wrap do_check_insn() with bpf_reset_stack_write_marks() /
bpf_commit_stack_write_marks() calls.
Any calls to bpf_mark_stack_write() are accumulated between this
pair of calls. If no bpf_mark_stack_write() calls were made
it means that the instruction does not access stack (at-least
on the current verification path) and it is important to record
this fact.
Finally, use bpf_live_stack_query_init() / bpf_stack_slot_alive()
to query stack liveness info.
The manual tracking of the correct order for callee/caller
bpf_update_live_stack() calls is a bit convoluted and may warrant some
automation in future revisions.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-7-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This commit adds a flow-sensitive, context-sensitive, path-insensitive
data flow analysis for live stack slots:
- flow-sensitive: uses program control flow graph to compute data flow
values;
- context-sensitive: collects data flow values for each possible call
chain in a program;
- path-insensitive: does not distinguish between separate control flow
graph paths reaching the same instruction.
Compared to the current path-sensitive analysis, this approach trades
some precision for not having to enumerate every path in the program.
This gives a theoretical capability to run the analysis before main
verification pass. See cover letter for motivation.
The basic idea is as follows:
- Data flow values indicate stack slots that might be read and stack
slots that are definitely written.
- Data flow values are collected for each
(call chain, instruction number) combination in the program.
- Within a subprogram, data flow values are propagated using control
flow graph.
- Data flow values are transferred from entry instructions of callee
subprograms to call sites in caller subprograms.
In other words, a tree of all possible call chains is constructed.
Each node of this tree represents a subprogram. Read and write marks
are collected for each instruction of each node. Live stack slots are
first computed for lower level nodes. Then, information about outer
stack slots that might be read or are definitely written by a
subprogram is propagated one level up, to the corresponding call
instructions of the upper nodes. Procedure repeats until root node is
processed.
In the absence of value range analysis, stack read/write marks are
collected during main verification pass, and data flow computation is
triggered each time verifier.c:states_equal() needs to query the
information.
Implementation details are documented in kernel/bpf/liveness.c.
Quantitative data about verification performance changes and memory
consumption is in the cover letter.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-6-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The next patch would require doing postorder traversal of individual
subprograms. Facilitate this by moving env->cfg.insn_postorder
computation from check_cfg() to a separate pass, as check_cfg()
descends into called subprograms (and it needs to, because of
merge_callee_effects() logic).
env->cfg.insn_postorder is used only by compute_live_registers(),
this function does not track cross subprogram dependencies,
thus the change does not affect it's operation.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-5-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Namely, rename the following functions and add prototypes to
bpf_verifier.h:
- find_containing_subprog -> bpf_find_containing_subprog
- insn_successors -> bpf_insn_successors
- calls_callback -> bpf_calls_callback
- fmt_stack_mask -> bpf_fmt_stack_mask
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-4-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
stacksafe() is called in exact == NOT_EXACT mode only for states that
had been porcessed by clean_verifier_states(). The latter replaces
dead stack spills with a series of STACK_INVALID masks. Such masks are
already handled by stacksafe().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-3-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Prepare for bpf_reg_state->live field removal by leveraging
insn_aux_data->live_regs_before instead of bpf_reg_state->live in
compute_live_registers(). This is similar to logic in
func_states_equal(). No changes in verification performance for
selftests or sched_ext.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-2-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Prepare for bpf_reg_state->live field removal by introducing a
separate flag to track if clean_verifier_state() had been applied to
the state. No functional changes.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-1-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This table is never modified, so mark it const.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
If a user specifies an AUX buffer larger than 2 GiB, the returned size
may exceed 0x80000000. Since the err variable is defined as a signed
32-bit integer, such a value overflows and becomes negative.
As a result, the perf record command reports an error:
0x146e8 [0x30]: failed to process type: 71 [Unknown error 183711232]
Change the type of the err variable to a signed 64-bit integer to
accommodate large buffer sizes correctly.
Fixes: d5652d865ea734a1 ("perf session: Add ability to skip 4GiB or more")
Reported-by: Tamas Zsoldos <tamas.zsoldos@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250808-perf_fix_big_buffer_size-v1-1-45f45444a9a4@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add two mmap() workloads: one that eagerly populates a region and
another that demand faults it in.
The intent is to probe the memory subsytem performance incurred
by mmap().
$ perf bench mem mmap -s 4gb -p 4kb -l 10 -f populate
# Running 'mem/mmap' benchmark:
# function 'populate' (Eagerly populated map())
# Copying 4gb bytes ...
1.811691 GB/sec
$ perf bench mem mmap -s 4gb -p 2mb -l 10 -f populate
# Running 'mem/mmap' benchmark:
# function 'populate' (Eagerly populated mmap())
# Copying 4gb bytes ...
12.272017 GB/sec
$ perf bench mem mmap -s 4gb -p 1gb -l 10 -f populate
# Running 'mem/mmap' benchmark:
# function 'populate' (Eagerly populated mmap())
# Copying 4gb bytes ...
17.085927 GB/sec
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Split mem benchmark options into common and memset/memcpy specific.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There can be a significant gap in memset/memcpy performance depending
on the size of the region being operated on.
With chunk-size=4kb:
$ echo madvise > /sys/kernel/mm/transparent_hugepage/enabled
$ perf bench mem memset -p 4kb -k 4kb -s 4gb -l 10 -f x86-64-stosq
# Running 'mem/memset' benchmark:
# function 'x86-64-stosq' (movsq-based memset() in arch/x86/lib/memset_64.S)
# Copying 4gb bytes ...
13.011655 GB/sec
With chunk-size=1gb:
$ echo madvise > /sys/kernel/mm/transparent_hugepage/enabled
$ perf bench mem memset -p 4kb -k 1gb -s 4gb -l 10 -f x86-64-stosq
# Running 'mem/memset' benchmark:
# function 'x86-64-stosq' (movsq-based memset() in arch/x86/lib/memset_64.S)
# Copying 4gb bytes ...
21.936355 GB/sec
So, allow the user to specify the chunk-size.
The default value is identical to the total size of the region, which
preserves current behaviour.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Page sizes that can be selected: 4KB, 2MB, 1GB.
Both the reservation and node from which hugepages are allocated
from are expected to be addressed by the user.
An example of page-size selection:
$ perf bench mem memset -s 4gb -p 2mb
# Running 'mem/memset' benchmark:
# function 'default' (Default memset() provided by glibc)
# Copying 4gb bytes ...
14.919194 GB/sec
# function 'x86-64-unrolled' (unrolled memset() in arch/x86/lib/memset_64.S)
# Copying 4gb bytes ...
11.514503 GB/sec
# function 'x86-64-stosq' (movsq-based memset() in arch/x86/lib/memset_64.S)
# Copying 4gb bytes ...
12.600568 GB/sec
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Using mmap() ensures that the buffer is always aligned at a fixed
boundary. Switch to that to remove one source of variability.
Since we always want to read/write from the allocated buffers map
with pagetables pre-populated.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
No functional change.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move benchmark function parameters in struct bench_params.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250917152418.4077386-4-ankur.a.arora@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Do type conversion to double at the point of use.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250917152418.4077386-3-ankur.a.arora@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We have two copies of each mem benchmark: one using cycles to
measure time, the second for gettimeofday().
Unify.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Variable idx is set in the loop, but is never used resulting in dead
code. Building with GCC 16, which enables
-Werror=unused-but-set-parameter= by default results in build error.
This patch removes the idx parameter, since all the callers of the
fm10k_unbind_hw_stats_q as 0 as idx anyways.
Suggested-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The variable 'err' in ixgbevf_resume() is used to store the return value
of different functions, which return an int. Currently, 'err' is
declared as u32, which is semantically incorrect and misleading.
In the Linux kernel, u32 is typically reserved for fixed-width data
used in hardware interfaces or protocol structures. Using it for a
generic error code may confuse reviewers or developers into thinking
the value is hardware-related or size-constrained.
Replace u32 with int to reflect the actual usage and improve code
clarity and semantic correctness.
No functional change.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The variable 'err' in iavf_resume() is used to store the return value
of different functions, which return an int. Currently, 'err' is
declared as u32, which is semantically incorrect and misleading.
In the Linux kernel, u32 is typically reserved for fixed-width data
used in hardware interfaces or protocol structures. Using it for a
generic error code may confuse reviewers or developers into thinking
the value is hardware-related or size-constrained.
Replace u32 with int to reflect the actual usage and improve code
clarity and semantic correctness.
No functional change.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add HW timestamping statistics support - through implementing get_ts_stats.
Timestamp statistics include correctly timestamped packets, discarded,
skipped and flushed during PTP release.
Most of the stats are collected per vport, only requests skipped due to
lack of free latch index are collected per Tx queue.
Statistics can be obtained using kernel ethtool since version 6.10
with:
ethtool -I -T <interface>
The output will include:
Statistics:
tx_pkts: 15
tx_lost: 0
tx_err: 0
Signed-off-by: Milena Olech <milena.olech@intel.com>
Co-developed-by: Anton Nadezhdin <anton.nadezhdin@intel.com>
Signed-off-by: Anton Nadezhdin <anton.nadezhdin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Moving the code to handle the LAG part of a VF reset to helper
functions deprecated the function ice_lag_move_new_vf_nodes().
The cleanup missed a call to this function in the error path of
ice_vc_cfg_qs_msg().
In the case that would end in the error path, a NULL pointer would
be encountered due to the empty list of netdevs for members of the
aggregate.
Remove the unnecessary call to ice_lag_move_new_vf_nodes(), and since
this is the only call to this function, remove the function as well.
Fixes: 351d8d8ab6af ("ice: breakout common LAG code into helpers")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Priya Singh <priyax.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The alloc_syscall_stats() function always returns an error pointer
(ERR_PTR) on failure.
So replace NULL check with IS_ERR() check after calling
alloc_syscall_stats() function.
Fixes: fc00897c8a3f7f57 ("perf trace: Add --summary-mode option")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
E830 supports Earliest TxTime First (ETF) hardware offload, which is
configured via the ETF Qdisc on a per-queue basis (see tc-etf(8)). ETF
introduces a new Tx flow mechanism that utilizes a timestamp ring
(tstamp_ring) alongside the standard Tx ring. This timestamp ring is
used to indicate when hardware will transmit a packet. Tx Time is
supported on the first 2048 Tx queues of the device, and the NVM image
limits the maximum number of Tx queues to 2048 for the device.
The allocation and initialization of the timestamp ring occur when the
feature is enabled on a specific Tx queue via tc-etf. The requested Tx
Time queue index cannot be greater than the number of Tx queues
(vsi->num_txq).
To support ETF, the following flags and bitmap are introduced:
- ICE_F_TXTIME: Device feature flag set for E830 NICs, indicating ETF
support.
- txtime_txqs: PF-level bitmap set when ETF is enabled and cleared
when disabled for a specific Tx queue. It is used by
ice_is_txtime_ena() to check if ETF is allocated and configured on
any Tx queue, which is checked during Tx ring allocation.
- ICE_TX_FLAGS_TXTIME: Per Tx ring flag set when ETF is allocated and
configured for a specific Tx queue. It determines ETF status during
packet transmission and is checked by ice_is_txtime_ena() to verify
if ETF is enabled on any Tx queue.
Due to a hardware issue that can result in a malicious driver detection
event, additional timestamp descriptors are required when wrapping
around the timestamp ring. Up to 64 additional timestamp descriptors
are reserved, reducing the available Tx descriptors.
To accommodate this, ICE_MAX_NUM_DESC_BY_MAC is introduced, defining:
- E830: Maximum Tx descriptor count of 8096 (8K - 32 - 64 for timestamp
fetch descriptors).
- E810 and E82X: Maximum Tx descriptor count of 8160 (8K - 32).
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Move ice_qp_[ena|dis] and related helper functions to ice_base.c to
allow reuse of these function currently only used by ice_xsk.c.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
