summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-09-19sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARCMichael Karcher
The referenced commit introduced exception handlers on user-space memory references in copy_from_user and copy_to_user. These handlers return from the respective function and calculate the remaining bytes left to copy using the current register contents. This commit fixes a couple of bad calculations. This will fix the return value of copy_from_user and copy_to_user in the faulting case. The behaviour of memcpy stays unchanged. Fixes: cb736fdbb208 ("sparc64: Convert U1copy_{from,to}_user to accurate exception reporting.") Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # on QEMU 10.0.3 Tested-by: René Rebe <rene@exactcode.com> # on Ultra 5 UltraSparc IIi Tested-by: Jonathan 'theJPster' Pallant <kernel@thejpster.org.uk> # on Sun Netra T1 Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Reviewed-by: Andreas Larsson <andreas@gaisler.com> Link: https://lore.kernel.org/r/20250905-memcpy_series-v4-1-1ca72dda195b@mkarcher.dialup.fu-berlin.de Signed-off-by: Andreas Larsson <andreas@gaisler.com>
2025-09-19can: raw: reorder struct raw_sock's members to optimise packingVincent Mailhol
struct raw_sock has several holes. Reorder the fields to save 8 bytes. Statistics before: $ pahole --class_name=raw_sock net/can/raw.o struct raw_sock { struct sock sk __attribute__((__aligned__(8))); /* 0 776 */ /* XXX last struct has 1 bit hole */ /* --- cacheline 12 boundary (768 bytes) was 8 bytes ago --- */ int ifindex; /* 776 4 */ /* XXX 4 bytes hole, try to pack */ struct net_device * dev; /* 784 8 */ netdevice_tracker dev_tracker; /* 792 0 */ struct list_head notifier; /* 792 16 */ unsigned int bound:1; /* 808: 0 4 */ unsigned int loopback:1; /* 808: 1 4 */ unsigned int recv_own_msgs:1; /* 808: 2 4 */ unsigned int fd_frames:1; /* 808: 3 4 */ unsigned int xl_frames:1; /* 808: 4 4 */ unsigned int join_filters:1; /* 808: 5 4 */ /* XXX 2 bits hole, try to pack */ /* Bitfield combined with next fields */ struct can_raw_vcid_options raw_vcid_opts; /* 809 4 */ /* XXX 3 bytes hole, try to pack */ canid_t tx_vcid_shifted; /* 816 4 */ canid_t rx_vcid_shifted; /* 820 4 */ canid_t rx_vcid_mask_shifted; /* 824 4 */ int count; /* 828 4 */ /* --- cacheline 13 boundary (832 bytes) --- */ struct can_filter dfilter; /* 832 8 */ struct can_filter * filter; /* 840 8 */ can_err_mask_t err_mask; /* 848 4 */ /* XXX 4 bytes hole, try to pack */ struct uniqframe * uniq; /* 856 8 */ /* size: 864, cachelines: 14, members: 20 */ /* sum members: 852, holes: 3, sum holes: 11 */ /* sum bitfield members: 6 bits, bit holes: 1, sum bit holes: 2 bits */ /* member types with bit holes: 1, total: 1 */ /* forced alignments: 1 */ /* last cacheline: 32 bytes */ } __attribute__((__aligned__(8))); ...and after: $ pahole --class_name=raw_sock net/can/raw.o struct raw_sock { struct sock sk __attribute__((__aligned__(8))); /* 0 776 */ /* XXX last struct has 1 bit hole */ /* --- cacheline 12 boundary (768 bytes) was 8 bytes ago --- */ struct net_device * dev; /* 776 8 */ netdevice_tracker dev_tracker; /* 784 0 */ struct list_head notifier; /* 784 16 */ int ifindex; /* 800 4 */ unsigned int bound:1; /* 804: 0 4 */ unsigned int loopback:1; /* 804: 1 4 */ unsigned int recv_own_msgs:1; /* 804: 2 4 */ unsigned int fd_frames:1; /* 804: 3 4 */ unsigned int xl_frames:1; /* 804: 4 4 */ unsigned int join_filters:1; /* 804: 5 4 */ /* XXX 2 bits hole, try to pack */ /* Bitfield combined with next fields */ struct can_raw_vcid_options raw_vcid_opts; /* 805 4 */ /* XXX 3 bytes hole, try to pack */ canid_t tx_vcid_shifted; /* 812 4 */ canid_t rx_vcid_shifted; /* 816 4 */ canid_t rx_vcid_mask_shifted; /* 820 4 */ can_err_mask_t err_mask; /* 824 4 */ int count; /* 828 4 */ /* --- cacheline 13 boundary (832 bytes) --- */ struct can_filter dfilter; /* 832 8 */ struct can_filter * filter; /* 840 8 */ struct uniqframe * uniq; /* 848 8 */ /* size: 856, cachelines: 14, members: 20 */ /* sum members: 852, holes: 1, sum holes: 3 */ /* sum bitfield members: 6 bits, bit holes: 1, sum bit holes: 2 bits */ /* member types with bit holes: 1, total: 1 */ /* forced alignments: 1 */ /* last cacheline: 24 bytes */ } __attribute__((__aligned__(8))); Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Vincent Mailhol <mailhol@kernel.org> Link: https://patch.msgid.link/20250917-can-raw-repack-v2-3-395e8b3a4437@kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19can: raw: use bitfields to store flags in struct raw_sockVincent Mailhol
The bound, loopback, recv_own_msgs, fd_frames, xl_frames and join_filters fields of struct raw_sock just need to store one bit of information. Declare all those members as a bitfields of type unsigned int and width one bit. Add a temporary variable to raw_setsockopt() and raw_getsockopt() to make the conversion between the stored bits and the socket interface. This reduces the size of struct raw_sock by sixteen bytes. Statistics before: $ pahole --class_name=raw_sock net/can/raw.o struct raw_sock { struct sock sk __attribute__((__aligned__(8))); /* 0 776 */ /* XXX last struct has 1 bit hole */ /* --- cacheline 12 boundary (768 bytes) was 8 bytes ago --- */ int bound; /* 776 4 */ int ifindex; /* 780 4 */ struct net_device * dev; /* 784 8 */ netdevice_tracker dev_tracker; /* 792 0 */ struct list_head notifier; /* 792 16 */ int loopback; /* 808 4 */ int recv_own_msgs; /* 812 4 */ int fd_frames; /* 816 4 */ int xl_frames; /* 820 4 */ struct can_raw_vcid_options raw_vcid_opts; /* 824 4 */ canid_t tx_vcid_shifted; /* 828 4 */ /* --- cacheline 13 boundary (832 bytes) --- */ canid_t rx_vcid_shifted; /* 832 4 */ canid_t rx_vcid_mask_shifted; /* 836 4 */ int join_filters; /* 840 4 */ int count; /* 844 4 */ struct can_filter dfilter; /* 848 8 */ struct can_filter * filter; /* 856 8 */ can_err_mask_t err_mask; /* 864 4 */ /* XXX 4 bytes hole, try to pack */ struct uniqframe * uniq; /* 872 8 */ /* size: 880, cachelines: 14, members: 20 */ /* sum members: 876, holes: 1, sum holes: 4 */ /* member types with bit holes: 1, total: 1 */ /* forced alignments: 1 */ /* last cacheline: 48 bytes */ } __attribute__((__aligned__(8))); ...and after: $ pahole --class_name=raw_sock net/can/raw.o struct raw_sock { struct sock sk __attribute__((__aligned__(8))); /* 0 776 */ /* XXX last struct has 1 bit hole */ /* --- cacheline 12 boundary (768 bytes) was 8 bytes ago --- */ int ifindex; /* 776 4 */ /* XXX 4 bytes hole, try to pack */ struct net_device * dev; /* 784 8 */ netdevice_tracker dev_tracker; /* 792 0 */ struct list_head notifier; /* 792 16 */ unsigned int bound:1; /* 808: 0 4 */ unsigned int loopback:1; /* 808: 1 4 */ unsigned int recv_own_msgs:1; /* 808: 2 4 */ unsigned int fd_frames:1; /* 808: 3 4 */ unsigned int xl_frames:1; /* 808: 4 4 */ unsigned int join_filters:1; /* 808: 5 4 */ /* XXX 2 bits hole, try to pack */ /* Bitfield combined with next fields */ struct can_raw_vcid_options raw_vcid_opts; /* 809 4 */ /* XXX 3 bytes hole, try to pack */ canid_t tx_vcid_shifted; /* 816 4 */ canid_t rx_vcid_shifted; /* 820 4 */ canid_t rx_vcid_mask_shifted; /* 824 4 */ int count; /* 828 4 */ /* --- cacheline 13 boundary (832 bytes) --- */ struct can_filter dfilter; /* 832 8 */ struct can_filter * filter; /* 840 8 */ can_err_mask_t err_mask; /* 848 4 */ /* XXX 4 bytes hole, try to pack */ struct uniqframe * uniq; /* 856 8 */ /* size: 864, cachelines: 14, members: 20 */ /* sum members: 852, holes: 3, sum holes: 11 */ /* sum bitfield members: 6 bits, bit holes: 1, sum bit holes: 2 bits */ /* member types with bit holes: 1, total: 1 */ /* forced alignments: 1 */ /* last cacheline: 32 bytes */ } __attribute__((__aligned__(8))); Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Vincent Mailhol <mailhol@kernel.org> Link: https://patch.msgid.link/20250917-can-raw-repack-v2-2-395e8b3a4437@kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19can: raw: reorder struct uniqframe's members to optimise packingVincent Mailhol
struct uniqframe has one hole. Reorder the fields to save 8 bytes. Statistics before: $ pahole --class_name=uniqframe net/can/raw.o struct uniqframe { int skbcnt; /* 0 4 */ /* XXX 4 bytes hole, try to pack */ const struct sk_buff * skb; /* 8 8 */ unsigned int join_rx_count; /* 16 4 */ /* size: 24, cachelines: 1, members: 3 */ /* sum members: 16, holes: 1, sum holes: 4 */ /* padding: 4 */ /* last cacheline: 24 bytes */ }; ...and after: $ pahole --class_name=uniqframe net/can/raw.o struct uniqframe { const struct sk_buff * skb; /* 0 8 */ int skbcnt; /* 8 4 */ unsigned int join_rx_count; /* 12 4 */ /* size: 16, cachelines: 1, members: 3 */ /* last cacheline: 16 bytes */ }; Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Vincent Mailhol <mailhol@kernel.org> Link: https://patch.msgid.link/20250917-can-raw-repack-v2-1-395e8b3a4437@kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19sparc64: fix prototypes of reads[bwl]()Al Viro
Conventions for readsl() are the same as for readl() - any __iomem pointer is acceptable, both const and volatile ones being OK. Same for readsb() and readsw(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Andreas Larsson <andreas@gaisler.com> # Making sparc64 subject prefix
2025-09-19Merge tag 'gpio-fixes-for-v6.17-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix an ACPI I2C HID driver breakage due to not initializing a structure on the stack and passing garbage down to GPIO core - ignore touchpad wakeup on GPD G1619-05 - fix debouncing configuration when looking up GPIOs in ACPI * tag 'gpio-fixes-for-v6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: acpi: initialize acpi_gpio_info struct gpiolib: acpi: Ignore touchpad wakeup on GPD G1619-05 gpiolib: acpi: Program debounce when finding GPIO
2025-09-19sparc64: Remove redundant __GFP_NOWARNQianfeng Rong
Commit 16f5dfbc851b ("gfp: include __GFP_NOWARN in GFP_NOWAIT") made GFP_NOWAIT implicitly include __GFP_NOWARN. Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT (e.g., `GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean up these redundant flags across subsystems. No functional changes. Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Reviewed-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Andreas Larsson <andreas@gaisler.com>
2025-09-19sparc64: fix hugetlb for sun4uAnthony Yznaga
An attempt to exercise sparc hugetlb code in a sun4u-based guest running under qemu results in the guest hanging due to being stuck in a trap loop. This is due to invalid hugetlb TTEs being installed that do not have the expected _PAGE_PMD_HUGE and page size bits set. Although the breakage has gone apparently unnoticed for several years, fix it now so there is the option to exercise sparc hugetlb code under qemu. This can be useful because sun4v support in qemu does not support linux guests currently and sun4v-based hardware resources may not be readily available. Fix tested with a 6.15.2 and 6.16-rc6 kernels by running libhugetlbfs tests on a qemu guest running Debian 13. Fixes: c7d9f77d33a7 ("sparc64: Multi-page size support") Cc: stable@vger.kernel.org Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: Andreas Larsson <andreas@gaisler.com> Link: https://lore.kernel.org/r/20250716012446.10357-1-anthony.yznaga@oracle.com Signed-off-by: Andreas Larsson <andreas@gaisler.com>
2025-09-19Input: atmel_mxt_ts - add support for generic touchscreen configurationsSvyatoslav Ryhel
This provides support for generic touchscreen configuration options like swapped-x-y, min-x, min-y, size-x, size-y, etc. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Link: https://lore.kernel.org/r/20250909054903.11519-3-clamor95@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-09-19sparc/module: Make it clear that relocation numbers are shown in hexKoakuma
This is to ease debugging by removing the ambiguity of the shown number base. Signed-off-by: Koakuma <koachan@protonmail.com> Reviewed-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Andreas Larsson <andreas@gaisler.com>
2025-09-19sparc/module: Add R_SPARC_UA64 relocation handlingKoakuma
This is needed so that the kernel can handle R_SPARC_UA64 relocations, which is emitted by LLVM's IAS. Signed-off-by: Koakuma <koachan@protonmail.com> Reviewed-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Andreas Larsson <andreas@gaisler.com>
2025-09-19dt-bindings: input: maxtouch: add common touchscreen propertiesSvyatoslav Ryhel
Since atmel,maxtouch describes touchscreens too, it should include common touchscreen properties. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250909054903.11519-2-clamor95@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-09-19PCI: sg2042: Add Sophgo SG2042 PCIe driverChen Wang
Add support for PCIe controller in Sophgo SG2042 SoC. The controller uses the Cadence PCIe core programmed by pcie-cadence* common driver. The PCIe controller in SG2042 works in host mode only, supporting data rate up to 16 GT/s and lanes up to x16 or x8. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> [mani: reworded description and minor code cleanups] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/01b0a57cd9dba8bed7c1f2d52997046c2c6f042b.1757643388.git.unicorn_wang@outlook.com
2025-09-19x86/umip: Check that the instruction opcode is at least two bytesSean Christopherson
When checking for a potential UMIP violation on #GP, verify the decoder found at least two opcode bytes to avoid false positives when the kernel encounters an unknown instruction that starts with 0f. Because the array of opcode.bytes is zero-initialized by insn_init(), peeking at bytes[1] will misinterpret garbage as a potential SLDT or STR instruction, and can incorrectly trigger emulation. E.g. if a VPALIGNR instruction 62 83 c5 05 0f 08 ff vpalignr xmm17{k5},xmm23,XMMWORD PTR [r8],0xff hits a #GP, the kernel emulates it as STR and squashes the #GP (and corrupts the userspace code stream). Arguably the check should look for exactly two bytes, but no three byte opcodes use '0f 00 xx' or '0f 01 xx' as an escape, i.e. it should be impossible to get a false positive if the first two opcode bytes match '0f 00' or '0f 01'. Go with a more conservative check with respect to the existing code to minimize the chances of breaking userspace, e.g. due to decoder weirdness. Analyzed by Nick Bray <ncbray@google.com>. Fixes: 1e5db223696a ("x86/umip: Add emulation code for UMIP instructions") Reported-by: Dan Snyder <dansnyder@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org
2025-09-19Merge patch series "can: esd_usb: Fixes and improvements"Marc Kleine-Budde
Stefan Mätje <stefan.maetje@esd.eu> says: The first patch makes some error messages also print the error code to achieve a higher significance. Removes also a duplicate message and makes the register / unregister messages symmetric. The second patch avoids emitting any error messages during the disconnect of CAN-USB devices or the driver unload. Changes in v2: - Second patch: - Convert all occurrences of error status prints to use "ERR_PTR(err)" instead of printing the decimal value of "err". - Rename retval to err in esd_usb_read_bulk_callback() to make the naming of error status variables consistent with all other functions. Link: https://patch.msgid.link/20250821143422.3567029-1-stefan.maetje@esd.eu [mkl: only take paches 4+5, which are new features, adjust cover letter accordingly] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19arm64: mm: split linear mapping if BBML2 unsupported on secondary CPUsRyan Roberts
The kernel linear mapping is painted in very early stage of system boot. The cpufeature has not been finalized yet at this point. So the linear mapping is determined by the capability of boot CPU only. If the boot CPU supports BBML2, large block mappings will be used for linear mapping. But the secondary CPUs may not support BBML2, so repaint the linear mapping if large block mapping is used and the secondary CPUs don't support BBML2 once cpufeature is finalized on all CPUs. If the boot CPU doesn't support BBML2 or the secondary CPUs have the same BBML2 capability with the boot CPU, repainting the linear mapping is not needed. Repainting is implemented by the boot CPU, which we know supports BBML2, so it is safe for the live mapping size to change for this CPU. The linear map region is walked using the pagewalk API and any discovered large leaf mappings are split to pte mappings using the existing helper functions. Since the repainting is performed inside of a stop_machine(), we must use GFP_ATOMIC to allocate the extra intermediate pgtables. But since we are still early in boot, it is expected that there is plenty of memory available so we will never need to sleep for reclaim, and so GFP_ATOMIC is acceptable here. The secondary CPUs are all put into a waiting area with the idmap in TTBR0 and reserved map in TTBR1 while this is performed since they cannot be allowed to observe any size changes on the live mappings. Some of this infrastructure is reused from the kpti case. Specifically we share the same flag (was __idmap_kpti_flag, now idmap_kpti_bbml2_flag) since it means we don't have to reserve any extra pgtable memory to idmap the extra flag. Co-developed-by: Yang Shi <yang@os.amperecomputing.com> Signed-off-by: Yang Shi <yang@os.amperecomputing.com> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2025-09-19PCI: cadence: Check for the existence of cdns_pcie::ops before using itChen Wang
cdns_pcie::ops might not be populated by all the Cadence glue drivers. This is going to be true for the upcoming Sophgo platform which doesn't set the ops. Hence, add a check to prevent NULL pointer dereference. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> [mani: reworded subject and description] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/35182ee1d972dfcd093a964e11205efcebbdc044.1757643388.git.unicorn_wang@outlook.com
2025-09-19dt-bindings: pci: Add Sophgo SG2042 PCIe hostChen Wang
Add binding for Sophgo SG2042 PCIe host controller. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/2755f145755b6096247c26852b63671a6fea4dbf.1757643388.git.unicorn_wang@outlook.com
2025-09-19can: esd_usb: Avoid errors triggered from USB disconnectStefan Mätje
The USB stack calls during disconnect the esd_usb_disconnect() callback. esd_usb_disconnect() calls netdev_unregister() for each network which in turn calls the net_device_ops::ndo_stop callback esd_usb_close() if the net device is up. The esd_usb_close() callback tries to disable all CAN Ids and to reset the CAN controller of the device sending appropriate control messages. Sending these messages in .disconnect() is moot and always fails because either the device is gone or the USB communication is already torn down by the USB stack in the course of a rmmod operation. Move the code that sends these control messages to a new function esd_usb_stop() which is approximately the counterpart of esd_usb_start() to make code structure less convoluted. Then change esd_usb_close() not to send the control messages at all if the ndo_stop() callback is executed from the USB .disconnect() callback. Add a new flag in_usb_disconnect to the struct esd_usb device structure to mark this condition which is checked by esd_usb_close() whether to skip the send operations in esd_usb_start(). Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> Link: https://patch.msgid.link/20250821143422.3567029-6-stefan.maetje@esd.eu [mkl: minor change patch description to imperative language] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19can: esd_usb: Rework display of error messagesStefan Mätje
- esd_usb_open(): Get rid of duplicate "couldn't start device: %d\n" message already printed from esd_usb_start(). - Fix duplicate printout of network device name when network device is registered. Add an unregister message for the network device as counterpart to the register message. - Add the printout of error codes together with the error messages in esd_usb_close() and some in esd_usb_probe(). The additional error codes should lead to a better understanding what is really going wrong. - Convert all occurrences of error status prints to use "ERR_PTR(err)" instead of printing the decimal value of "err". - Rename retval to err in esd_usb_read_bulk_callback() to make the naming of error status variables consistent with all other functions. Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> Link: https://patch.msgid.link/20250821143422.3567029-5-stefan.maetje@esd.eu [mkl: minor change patch description to imperative language] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19Merge tag 'mmc-v6.17-rc2-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fixes from Ulf Hansson: - mvsdio: Fix dma_unmap_sg() nents value - sdhci: Fix clock management for UHS-II - sdhci-pci-gli: Fix initialization of UHS-II for GL9767 * tag 'mmc-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-pci-gli: GL9767: Fix initializing the UHS-II interface during a power-on mmc: sdhci-uhs2: Fix calling incorrect sdhci_set_clock() function mmc: sdhci: Move the code related to setting the clock from sdhci_set_ios_common() into sdhci_set_ios() mmc: mvsdio: Fix dma_unmap_sg() nents value
2025-09-19dt-bindings: watchdog: Convert nuvoton,npcm-wdt to DT schemaRob Herring (Arm)
Convert the Nuvoton watchdog binding to DT schema format. It's a straight-forward conversion. Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20250909142201.3209482-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-09-19dt-bindings: arm: Add Arm C1 cores and PMUsRob Herring (Arm)
Add the newly introduced Arm C1-Nano/Pro/Premium/Ultra core and PMU compatible strings. These cores are part of the Lumex CSS. The new names are replacing the long lived Cortex-A/X branding going forward. Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-09-19dt-bindings: display: mediatek,ufoe: Add mediatek,gce-client-reg propertyAriel D'Alessandro
Currently, users of Mediatek UFOe (Unified Frame Optimization engine) DT bindings set mediatek,gce-client-reg node property, which is missing from the DT schema. For example, device tree arch/arm64/boot/dts/mediatek/mt8173.dtsi is causing the following dtb check error: arch/arm64/boot/dts/mediatek/mt8173-elm.dtb: ufoe@1401a000 (mediatek,mt8173-disp-ufoe): 'mediatek,gce-client-reg' does not match any of the regexes: '^pinctrl-[0-9]+$' This commit adds the missing node property in the DT schema and updates the example as well. Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250911151001.108744-7-ariel.dalessandro@collabora.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-09-19dt-bindings: display: mediatek,od: Add mediatek,gce-client-reg propertyAriel D'Alessandro
Currently, users of Mediatek OD (display overdrive) DT bindings set mediatek,gce-client-reg node property, which is missing from the DT schema. For example, device tree arch/arm64/boot/dts/mediatek/mt8173.dtsi is causing the following dtb check error: arch/arm64/boot/dts/mediatek/mt8173-elm.dtb: od@14023000 (mediatek,mt8173-disp-od): 'mediatek,gce-client-reg' does not match any of the regexes: '^pinctrl-[0-9]+$' This commit adds the missing node property in the DT schema and updates the example as well. Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Link: https://lore.kernel.org/r/20250911151001.108744-6-ariel.dalessandro@collabora.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-09-19dt-bindings: edac: Convert apm,xgene-edac to DT schemaRob Herring (Arm)
Convert the APM XGene EDAC binding to DT schema. Add the missing "apm,xgene-edac-soc" compatible, and drop the unused "apm,xgene-edac-pmd-v2" compatible. Link: https://lore.kernel.org/r/20250828223023.2409337-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-09-19dt-binding: thermal: Convert marvell,armada-ap806-thermal to DT schemaRob Herring (Arm)
Convert the Marvell Armada AP80x/CP110 thermal binding to schema. It is a straight forward conversion. Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20250822225701.766947-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-09-19dt-bindings: thermal: Convert marvell,armada370-thermal to DT schemaRob Herring (Arm)
Convert the Marvell Armada 3xx/XP thermal binding to schema. Drop the AP80x and CP110 as they have long been deprecated and have been replaced by a new binding. Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20250822225645.766397-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-09-19dt-bindings: watchdog: Convert marvell,armada-3700-wdt to DT schemaRob Herring (Arm)
Convert the Marvell Armada 3700 watchdog binding to DT schema format. It's a straight-forward conversion. Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20250812203301.726374-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-09-19dt-bindings: mailbox: Convert brcm,iproc-flexrm-mbox to DT schemaRob Herring (Arm)
Convert the Broadcom FlexRM Ring Manager binding to DT schema format. It's a straightforward conversion. Link: https://lore.kernel.org/r/20250812181415.66923-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-09-19dt-bindings: mailbox: Convert brcm,iproc-pdc-mbox to DT schemaRob Herring (Arm)
Convert the Broadcom iProc PDC mailbox binding to DT schema format. It's a straightforward conversion. Link: https://lore.kernel.org/r/20250812181406.65390-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-09-19dt-bindings: mailbox: Convert marvell,armada-3700-rwtm-mailbox to DT schemaRob Herring (Arm)
Convert the Marvell Armada 3700 rWTM mailbox binding to DT schema format. It's a straightforward conversion. Link: https://lore.kernel.org/r/20250812181357.63395-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-09-19dt-bindings: mailbox: Convert rockchip,rk3368-mailbox to DT schemaRob Herring (Arm)
Convert the rockchip,rk3368-mailbox binding to DT schema format. Add the missing 'clocks' and 'clock-names' properties. Document that it's one interrupt per mailbox channel (and there are 4 channels). Link: https://lore.kernel.org/r/20250812181348.62137-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-09-19dt-bindings: watchdog: Drop duplicate moxa,moxart-watchdog.txtRob Herring (Arm)
"moxa,moxart-watchdog" is already documented in faraday,ftwdt010.yaml, so drop the old text binding. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Fixes: 289660a4af0e ("dt-bindings: watchdog: convert faraday,ftwdt010 to yaml") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250807214222.4170236-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-09-19Merge patch series "can: rcar_can: Miscellaneous cleanups and improvements"Marc Kleine-Budde
Geert Uytterhoeven <geert+renesas@glider.be> says: This patch series contains miscellaneous cleanups and improvements for the R-Car CAN driver. I deliberately sent this as a separate series from "[PATCH] can: rcar_can: Fix s2ram with PSCI"[1], to avoid blocking the latter. However, this series (in particular [PATCH 3/9]) does depend on it. Changes compared to v1[2]: - Convert new Runtime PM error messages to %pe, - New patches 10 and 11. [1] https://lore.kernel.org/699b2f7fcb60b31b6f976a37f08ce99c5ffccb31.1755165227.git.geert+renesas@glider.be [2] https://lore.kernel.org/cover.1755172404.git.geert+renesas@glider.be Link: https://patch.msgid.link/cover.1755857536.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19can: rcar_can: Convert to %peGeert Uytterhoeven
Replace numerical error codes by mnemotechnic error codes, to improve the user experience in case of errors. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/adb2dc49c78b45191de410f645a5e423d341f94e.1755857536.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19can: rcar_can: Do not print alloc_candev() failuresGeert Uytterhoeven
If alloc_candev() failed due to out-of-memory, the core memory allocation code has already printed an error message. If alloc_candev() failed for a different reason, alloc_netdev_mqs() has already printed an error message. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/2d6ad4be211a35492570fd7219ca7a89b384bfad.1755857536.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19can: rcar_can: Mailbox bitfield conversionGeert Uytterhoeven
Convert CAN Mailbox Register field accesses to use the FIELD_PREP() and FIELD_GET() bitfield access macro. This gets rid of explicit shifts, and keeps a clear separation between hardware register layouts and offical CAN definitions. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/c75c7d6ed5929c4becf7c9178cec04a0731e8ab1.1755857536.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19can: rcar_can: BCR bitfield conversionGeert Uytterhoeven
Convert CAN Bit Configuration Register field accesses to use the FIELD_PREP() bitfield access macro. While at it, fix the misspelling of BRP. This gets rid of custom function-like field preparation macros. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/01cfaedba2be22515ba8700893ea7f113df959c0.1755857536.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19can: rcar_can: TFCR bitfield conversionGeert Uytterhoeven
Convert CAN Transmit FIFO Control Register field accesses to use the FIELD_GET() bitfield access macro. This gets rid of an explicit shift. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/a8b1dc6f1249a01af9b691ca59e2e5cc2dba6d44.1755857536.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19can: rcar_can: CTLR bitfield conversionGeert Uytterhoeven
Convert CAN Control Register field accesses to use the FIELD_PREP() bitfield access macro. Add a few more comments and definitions while at it. This gets rid of explicit (and sometimes confusing) shifts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/077640e31949dc3c9d128a08ade94c9e9cd25672.1755857536.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19can: rcar_can: Convert to GENMASK()Geert Uytterhoeven
Use the GENMASK() macro instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/3f947f0f91a8857a2cbce74807e42258e9f209ca.1755857536.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19can: rcar_can: Convert to BIT()Geert Uytterhoeven
Use the BIT() macro instead of open-coding the same operation. Add a few more comments while at it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/78fb16beb74975f6f6140ec9abb48beb94fb0afa.1755857536.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19can: rcar_can: Convert to Runtime PMGeert Uytterhoeven
The R-Car CAN module is part of a Clock Domain on all supported SoCs. Hence convert its driver from explicit clock management to Runtime PM. While at it, use %pe to format error codes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/68bfa5480a79c17c6ceec4fb073f33872e7ff5d0.1755857536.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19can: rcar_can: Add helper variable dev to rcar_can_probe()Geert Uytterhoeven
rcar_can_probe() has many users of "pdev->dev". Introduce a shorthand to simplify the code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/baf34c8bef5625ae73c830dbb3c617eb8f7adddd.1755857536.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19can: rcar_can: Consistently use ndev for net_device pointersGeert Uytterhoeven
Most net_device pointers are named "ndev", but some are called "dev". Increase uniformity by always using "ndev". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/aac66fb5b5e1d6787121cf2ec36b551b41d4b32e.1755857536.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19can: peak_usb: fix shift-out-of-bounds issueStéphane Grosjean
Explicitly uses a 64-bit constant when the number of bits used for its shifting is 32 (which is the case for PC CAN FD interfaces supported by this driver). Signed-off-by: Stéphane Grosjean <stephane.grosjean@hms-networks.com> Link: https://patch.msgid.link/20250918132413.30071-1-stephane.grosjean@free.fr Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Closes: https://lore.kernel.org/20250917-aboriginal-refined-honeybee-82b1aa-mkl@pengutronix.de Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") [mkl: update subject, apply manually] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-09-19Merge tag 'pmdomain-v6.17-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain fixes from Ulf Hansson: "pmdomain core: - Restore behaviour for disabling unused PM domains and introduce the GENPD_FLAG_NO_STAY_ON configuration bit pmdomain providers: - renesas: Don't keep unused PM domains powered-on - rockchip: Fix regulator dependency with GENPD_FLAG_NO_STAY_ON" * tag 'pmdomain-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: pmdomain: renesas: rmobile-sysc: Don't keep unused PM domains powered-on pmdomain: renesas: rcar-gen4-sysc: Don't keep unused PM domains powered-on pmdomain: renesas: rcar-sysc: Don't keep unused PM domains powered-on pmdomain: rockchip: Fix regulator dependency with GENPD_FLAG_NO_STAY_ON pmdomain: core: Restore behaviour for disabling unused PM domains pmdomain: renesas: rcar-sysc: Make rcar_sysc_onecell_np __initdata
2025-09-19Merge tag 'loongarch-fixes-6.17-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix some build warnings for RUST-enabled objtool check, align ACPI structures for ARCH_STRICT_ALIGN, fix an unreliable stack for live patching, add some NULL pointer checkings, and fix some bugs around KVM" * tag 'loongarch-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_pch_pic_regs_access() LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_sw_status_access() LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_regs_access() LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_ctrl_access() LoongArch: KVM: Fix VM migration failure with PTW enabled LoongArch: KVM: Remove unused returns and semicolons LoongArch: vDSO: Check kcalloc() result in init_vdso() LoongArch: Fix unreliable stack for live patching LoongArch: Replace sprintf() with sysfs_emit() LoongArch: Check the return value when creating kobj LoongArch: Align ACPI structures if ARCH_STRICT_ALIGN enabled LoongArch: Update help info of ARCH_STRICT_ALIGN LoongArch: Handle jump tables options for RUST LoongArch: Make LTO case independent in Makefile objtool/LoongArch: Mark special atomic instruction as INSN_BUG type objtool/LoongArch: Mark types based on break immediate code
2025-09-19selftests: ublk: add test to verify that feat_map is completeUday Shankar
Add a test that verifies that the currently running kernel does not report support for any features that are unrecognized by kublk. This should catch cases where features are added without updating kublk's feat_map accordingly, which has happened multiple times in the past (see [1], [2]). Note that this new test may fail if the test suite is older than the kernel, and the newer kernel contains a newly introduced feature. I believe this is not a use case we currently care about - we only care about newer test suites passing on older kernels. [1] https://lore.kernel.org/linux-block/20250606214011.2576398-1-csander@purestorage.com/t/#u [2] https://lore.kernel.org/linux-block/2a370ab1-d85b-409d-b762-f9f3f6bdf705@nvidia.com/t/#m1c520a058448d594fd877f07804e69b28908533f Signed-off-by: Uday Shankar <ushankar@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.3 (git 2.53.0) at 2026-11-13 00:41:57 +0000