| Age | Commit message (Collapse) | Author |
|---|
|
For ublk servers with many ublk queues, accessing the ublk_queue in
ublk_register_io_buf() is a frequent cache miss. Get the flags from the
ublk_device instead, which is accessed earlier in
ublk_ch_uring_cmd_local().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Avoid repeating the 2 dereferences to get the ublk_device from the
io_uring_cmd by passing it from ublk_ch_uring_cmd_local() to
ublk_register_io_buf().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For ublk servers with many ublk queues, accessing the ublk_queue in
ublk_ch_{read,write}_iter() is a frequent cache miss. Get the flags and
queue depth from the ublk_device instead, which is accessed just before.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For ublk servers with many ublk queues, accessing the ublk_queue to
handle a ublk command is a frequent cache miss. Get the queue depth from
the ublk_device instead, which is accessed just before.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce ublk_device analogues of the ublk_queue flag helpers:
- ublk_support_zero_copy() -> ublk_dev_support_user_copy()
- ublk_support_auto_buf_reg() -> ublk_dev_support_auto_buf_reg()
- ublk_support_user_copy() -> ublk_dev_support_user_copy()
- ublk_need_map_io() -> ublk_dev_need_map_io()
- ublk_need_req_ref() -> ublk_dev_need_req_ref()
- ublk_need_get_data() -> ublk_dev_need_get_data()
These will be used in subsequent changes to avoid accessing the
ublk_queue just for the flags, and instead use the ublk_device.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__ublk_fail_req() only uses the ublk_queue to get the ublk_device, which
its caller already has. So just pass the ublk_device directly.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_queue_cmd_buf_size() only needs the queue depth, which is the same
for all queues. Get the queue depth from the ublk_device instead so the
q_id parameter can be dropped.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_get_queue() never returns a NULL pointer, so there's no need to
check its return value in ublk_check_and_get_req(). Drop the check.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The nvme uring_cmd only uses 32b CQEs. If the ring uses a mixed CQ, then
we need to make sure we flag the completion as a 32b CQE.
On the other hand, if nvme uring_cmd was using a dedicated 32b CQE, the
posting was missing the extra memcpy because it only applied to bit CQEs
on a mixed CQ.
Fixes: e26dca67fde1943 ("io_uring: add support for IORING_SETUP_CQE_MIXED")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Return the result of calling crypto_register_alg() directly and remove
the local return variable.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When the initialization of qm->debug.acc_diff_reg fails,
the probe process does not exit. However, after qm->debug.qm_diff_regs is
freed, it is not set to NULL. This can lead to a double free when the
remove process attempts to free it again. Therefore, qm->debug.qm_diff_regs
should be set to NULL after it is freed.
Fixes: 8be091338971 ("crypto: hisilicon/debugfs - Fix debugfs uninit process issue")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When disabling SR-IOV, clear the configuration of each VF
in the hardware. Do not exit the configuration clearing process
due to the failure of a single VF. Additionally, Clear the VF
configurations before decrementing the PM counter.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When an error occurs on the device, an interrupt is reported.
When the firmware forwards the interrupt to the driver and masks the
error. If the driver does not enable error reporting when an error does
not need to be reset, the device does not report the error to the driver
when the error occurs again. Therefore, after the driver obtains the
information, the error reporting needs to be enabled again.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
After the device memory is cleared, if the software sends
the doorbell operation, the hardware may trigger a axi error
when processing the doorbell. This error is caused by memory
clearing and hardware access to address 0. Therefore, the axi
error is masked during this period.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Before the device reset, although the driver has set the queue
status to intercept doorbells sent by the task process, the reset
thread is isolated from the user-mode task process, so the task process
may still send doorbells. Therefore, before the reset, the queue is
directly invalidated, and the device directly discards the doorbells
sent by the process.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Returning values through arguments is confusing and that has
upset the compiler with the recent change to memdup_user:
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c: In function ‘adf_ctl_ioctl’:
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:308:26: warning: ‘ctl_data’ may be used uninitialized [-Wmaybe-uninitialized]
308 | ctl_data->device_id);
| ^~
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:294:39: note: ‘ctl_data’ was declared here
294 | struct adf_user_cfg_ctl_data *ctl_data;
| ^~~~~~~~
In function ‘adf_ctl_ioctl_dev_stop’,
inlined from ‘adf_ctl_ioctl’ at ../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:386:9:
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:273:48: warning: ‘ctl_data’ may be used uninitialized [-Wmaybe-uninitialized]
273 | ret = adf_ctl_is_device_in_use(ctl_data->device_id);
| ~~~~~~~~^~~~~~~~~~~
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c: In function ‘adf_ctl_ioctl’:
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:261:39: note: ‘ctl_data’ was declared here
261 | struct adf_user_cfg_ctl_data *ctl_data;
| ^~~~~~~~
In function ‘adf_ctl_ioctl_dev_config’,
inlined from ‘adf_ctl_ioctl’ at ../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:382:9:
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:192:54: warning: ‘ctl_data’ may be used uninitialized [-Wmaybe-uninitialized]
192 | accel_dev = adf_devmgr_get_dev_by_id(ctl_data->device_id);
| ~~~~~~~~^~~~~~~~~~~
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c: In function ‘adf_ctl_ioctl’:
../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:185:39: note: ‘ctl_data’ was declared here
185 | struct adf_user_cfg_ctl_data *ctl_data;
| ^~~~~~~~
Fix this by returning the pointer directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It seems like everywhere in this file, when the request is not
bidirectionala, req->src is mapped with DMA_TO_DEVICE and req->dst is
mapped with DMA_FROM_DEVICE.
Fixes: 62f58b1637b7 ("crypto: aspeed - add HACE crypto driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add rcu_dereference_all and rcu_dereference_all_check so that
library code such as rhashtable can be used with any RCU variant.
As it stands rcu_dereference is used within rashtable, which
creates false-positive warnings if the user calls it from another
RCU context, such as preempt_disable().
Use the rcu_dereference_all and rcu_dereference_all_check calls
in rhashtable to suppress these warnings.
Also replace the rcu_dereference_raw calls in the list iterators
with rcu_dereference_all to uncover buggy calls.
Reported-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In commit 42d9f6c77479 ("crypto: acomp - Move scomp stream allocation
code into acomp"), the crypto_acomp_streams struct was made to rely on
having the alloc_ctx and free_ctx operations defined in the same order
as the scomp_alg struct. But in that same commit, the alloc_ctx and
free_ctx members of scomp_alg may be randomized by structure layout
randomization, since they are contained in a pure ops structure
(containing only function pointers). If the pointers within scomp_alg
are randomized, but those in crypto_acomp_streams are not, then
the order may no longer match. This fixes the problem by removing the
union from scomp_alg so that both crypto_acomp_streams and scomp_alg
will share the same definition of alloc_ctx and free_ctx, ensuring
they will always have the same layout.
Signed-off-by: Dan Moulding <dan@danm.net>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes: 42d9f6c77479 ("crypto: acomp - Move scomp stream allocation code into acomp")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
* kvm-arm64/misc-6.18:
: .
: .
: Misc improvements and bug fixes:
:
: - Fix XN handling in the S2 page table dumper
: (20250809135356.1003520-1-r09922117@csie.ntu.edu.tw)
:
: - Fix sanitity checks for huge mapping with pKVM running np guests
: (20250815162655.121108-1-ben.horgan@arm.com)
:
: - Fix use of TRBE when KVM is disabled, and Linux running under
: a lesser hypervisor (20250902-etm_crash-v2-1-aa9713a7306b@oss.qualcomm.com)
:
: - Fix out of date MTE-related comments (20250915155234.196288-1-alexandru.elisei@arm.com)
:
: - Fix PSCI BE support when running a NV guest (20250916161103.1040727-1-maz@kernel.org)
:
: - Fix page reference leak when refusing to map a page due to mismatched attributes
: (20250917130737.2139403-1-tabba@google.com)
:
: - Add trap handling for PMSDSFR_EL1
: (20250901-james-perf-feat_spe_eft-v8-7-2e2738f24559@linaro.org)
:
: - Add advertisement from FEAT_LSFE (Large System Float Extension)
: (20250918-arm64-lsfe-v4-1-0abc712101c7@kernel.org)
: .
KVM: arm64: Expose FEAT_LSFE to guests
KVM: arm64: Add trap configs for PMSDSFR_EL1
KVM: arm64: Fix page leak in user_mem_abort()
KVM: arm64: Fix kvm_vcpu_{set,is}_be() to deal with EL2 state
KVM: arm64: Update stale comment for sanitise_mte_tags()
KVM: arm64: Return early from trace helpers when KVM isn't available
KVM: arm64: Fix debug checking for np-guests using huge mappings
KVM: arm64: ptdump: Don't test PTE_VALID alongside other attributes
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/nv-misc-6.18:
: .
: Various NV-related fixes:
:
: - Relax KVM's SError injection to consider that HCR_EL2.AMO's
: effective value is 1 when HCR_EL2.{E2H,TGE)=={1,0}.
: (20250918164632.410404-1-oliver.upton@linux.dev)
:
: - Allow userspace to disable some S2 base granule sizes
: (20250918165505.415017-1-oliver.upton@linux.dev)
: .
KVM: arm64: nv: Allow userspace to de-feature stage-2 TGRANs
KVM: arm64: nv: Treat AMO as 1 when at EL2 and {E2H,TGE} = {1, 0}
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/el2-feature-control: (23 commits)
: .
: General rework of EL2 features that can be disabled to satisfy
: the requirement of migration between heterogeneous hosts:
:
: - Handle effective RES0 behaviour of undefined registers, making sure
: that disabling a feature affects full registeres, and not just
: individual control bits. (20250918151402.1665315-1-maz@kernel.org)
:
: - Allow ID_AA64MMFR1_EL1.{TWED,HCX} to be disabled from userspace.
: (20250911114621.3724469-1-yangjinqian1@huawei.com)
:
: - Turn the NV feature management into a deny-list, and expose
: missing features to EL2 guests.
: (20250912212258.407350-1-oliver.upton@linux.dev)
: .
KVM: arm64: nv: Expose up to FEAT_Debugv8p8 to NV-enabled VMs
KVM: arm64: nv: Advertise FEAT_TIDCP1 to NV-enabled VMs
KVM: arm64: nv: Advertise FEAT_SpecSEI to NV-enabled VMs
KVM: arm64: nv: Expose FEAT_TWED to NV-enabled VMs
KVM: arm64: nv: Exclude guest's TWED configuration when TWE isn't set
KVM: arm64: nv: Expose FEAT_AFP to NV-enabled VMs
KVM: arm64: nv: Expose FEAT_ECBHB to NV-enabled VMs
KVM: arm64: nv: Expose FEAT_RASv1p1 via RAS_frac
KVM: arm64: nv: Expose FEAT_DF2 to NV-enabled VMs
KVM: arm64: nv: Don't erroneously claim FEAT_DoubleLock for NV VMs
KVM: arm64: nv: Convert masks to denylists in limit_nv_id_reg()
KVM: arm64: selftests: Test writes to ID_AA64MMFR1_EL1.{HCX, TWED}
KVM: arm64: Make ID_AA64MMFR1_EL1.{HCX, TWED} writable from userspace
KVM: arm64: Convert MDCR_EL2 RES0 handling to compute_reg_res0_bits()
KVM: arm64: Convert SCTLR_EL1 RES0 handling to compute_reg_res0_bits()
KVM: arm64: Enforce absence of FEAT_TCR2 on TCR2_EL2
KVM: arm64: Enforce absence of FEAT_SCTLR2 on SCTLR2_EL{1,2}
KVM: arm64: Convert HCR_EL2 RES0 handling to compute_reg_res0_bits()
KVM: arm64: Enforce absence of FEAT_HCX on HCRX_EL2
KVM: arm64: Enforce absence of FEAT_FGT2 on FGT2 registers
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/nv-debug:
: .
: Fix handling of MDSCR_EL1 in NV context, which is unfortunately
: mishandled by the architecture. Patches courtesy of Oliver Upton
: (20250917203125.283116-2-oliver.upton@linux.dev)
: .
KVM: arm64: nv: Apply guest's MDCR traps in nested context
KVM: arm64: nv: Trap debug registers when in hyp context
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/gic-v5-nv:
: .
: Add NV support to GICv5 in GICv3 emulation mode, ensuring that the v3
: guest support is identical to that of a pure v3 platform.
:
: Patches courtesy of Sascha Bischoff (20250828105925.3865158-1-sascha.bischoff@arm.com)
: .
irqchip/gic-v5: Drop has_gcie_v3_compat from gic_kvm_info
KVM: arm64: Use ARM64_HAS_GICV5_LEGACY for GICv5 probing
arm64: cpucaps: Add GICv5 Legacy vCPU interface (GCIE_LEGACY) capability
KVM: arm64: Enable nested for GICv5 host with FEAT_GCIE_LEGACY
KVM: arm64: Don't access ICC_SRE_EL2 if GICv3 doesn't support v2 compatibility
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/52bit-at:
: .
: Upgrade the S1 page table walker to support 52bit PA, and use it to
: report the fault level when taking a S2 fault on S1PTW, which is required
: by the architecture (20250915114451.660351-1-maz@kernel.org).
: .
KVM: arm64: selftest: Expand external_aborts test to look for TTW levels
KVM: arm64: Populate level on S1PTW SEA injection
KVM: arm64: Add S1 IPA to page table level walker
KVM: arm64: Add filtering hook to S1 page table walk
KVM: arm64: Don't switch MMU on translation from non-NV context
KVM: arm64: Allow EL1 control registers to be accessed from the CPU state
KVM: arm64: Allow use of S1 PTW for non-NV vcpus
KVM: arm64: Report faults from S1 walk setup at the expected start level
KVM: arm64: Expand valid block mappings to FEAT_LPA/LPA2 support
KVM: arm64: Populate PAR_EL1 with 52bit addresses
KVM: arm64: Compute shareability for LPA2
KVM: arm64: Pass the walk_info structure to compute_par_s1()
KVM: arm64: Decouple output address from the PT descriptor
KVM: arm64: Compute 52bit TTBR address and alignment
KVM: arm64: Account for 52bit when computing maximum OA
KVM: arm64: Add helper computing the state of 52bit PA support
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Refuse to register a cpuidle device if the given CPU has a cpuidle
device already and print a message regarding it.
Without this, an attempt to register a new cpuidle device without
unregistering the existing one leads to the removal of the existing
cpuidle device without removing its sysfs interface.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
sprintf()/scnprintf()
The ->show() callbacks in sysfs should use sysfs_emit() or
sysfs_emit_at() when formatting values for user space.
These helpers are the recommended way to ensure correct buffer
handling and consistency across the kernel.
See Documentation/filesystems/sysfs.rst for details.
No functional change intended.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Vivek Yadav <vivekyadav1207731111@gmail.com>
Link: https://patch.msgid.link/20250919165657.233349-1-vivekyadav1207731111@gmail.com
[ rjw: Minor subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
commit 2a6c72738706 ("cpufreq: Initialize cpufreq-based
frequency-invariance later") postponed the frequency invariance
initialization to avoid disabling it in the error case.
This isn't locking safe, instead move the initialization up before
the subsys interface is registered (which will rebuild the
sched_domains) and add the corresponding disable on the error path.
Observed lockdep without this patch:
[ 0.989686] ======================================================
[ 0.989688] WARNING: possible circular locking dependency detected
[ 0.989690] 6.17.0-rc4-cix-build+ #31 Tainted: G S
[ 0.989691] ------------------------------------------------------
[ 0.989692] swapper/0/1 is trying to acquire lock:
[ 0.989693] ffff800082ada7f8 (sched_energy_mutex){+.+.}-{4:4}, at: rebuild_sched_domains_energy+0x30/0x58
[ 0.989705]
but task is already holding lock:
[ 0.989706] ffff000088c89bc8 (&policy->rwsem){+.+.}-{4:4}, at: cpufreq_online+0x7f8/0xbe0
[ 0.989713]
which lock already depends on the new lock.
Fixes: 2a6c72738706 ("cpufreq: Initialize cpufreq-based frequency-invariance later")
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a basic test corrupting a level-2 table entry to check that
the resulting abort is a SEA on a PTW at level-3.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Our fault injection mechanism is mildly primitive, and doesn't
really implement the architecture when it comes to reporting
the level of a failing S1 PTW (we blindly report a SEA outside
of a PTW).
Now that we can walk the S1 page tables and look for a particular
IPA in the descriptors, it is pretty easy to improve the SEA
injection code.
Note that we only do it for AArch64 guests, and that 32bit guests
are left to their own device (oddly enough, I don't fancy writing
a 32bit PTW...).
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Use the filtering hook infrastructure to implement a new walker
that, for a given VA and an IPA, returns the level of the first
occurence of this IPA in the walk from that VA.
This will be used to improve our SEA syndrome reporting.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add a filtering hook that can get called on each level of the
walk, and providing access to the full state.
Crucially, this is called *before* the access is made, so that
it is possible to track down the level of a faulting access.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
If calling into the AT code from guest EL1, there is no need
to consider any context switch, as we are guaranteed to be
in the correct context.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As we are about to plug the SW PTW into the EL1-only code, we can
no longer assume that the EL1 state is not resident on the CPU,
as we don't necessarily get there from EL2 traps.
Turn the __vcpu_sys_reg() access on the EL1 state into calls to
the vcpu_read_sys_reg() helper, which is guaranteed to do the
right thing.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As we are about to use the S1 PTW in non-NV contexts, we must make
sure that we don't evaluate the EL2 state when dealing with the EL1&0
translation regime.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Translation faults from TTBR must be reported on the start level,
and not level-0. Enforcing this requires moving quite a lot of
code around so that the start level can be computed early enough
that it is usable.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
With 52bit PAs, block mappings can exist at different levels (such
as level 0 for 4kB pages, or level 1 for 16kB and 64kB pages).
Account for this in walk_s1().
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Expand the output address populated in PAR_EL1 to 52bit addresses.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
LPA2 gets the memory access shareability from TCR_ELx instead of
getting it form the descriptors. Store it in the walk info struct
so that it is passed around and evaluated as required.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Instead of just passing the translation regime, pass the full
walk_info structure to compute_par_s1(). This will help further
chamges that will require it.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add a helper converting the descriptor into a nicely formed OA,
irrespective of the in-descriptor representation (< 52bit, LPA
or LPA2).
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
52bit addresses from TTBR need extra adjustment and alignment
checks. Implement the requirements of the architecture.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Adjust the computation of the max OA to account for 52bit PAs.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Track whether the guest is using 52bit PAs, either LPA or LPA2.
This further simplifies the handling of LVA for 4k and 16k pages,
as LPA2 implies LVA in this case.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
headers
Commit d5094bcb5bfd ("tools/nolibc: define time_t in terms of
__kernel_old_time_t") made nolibc use the kernel's time type so that
`time_t` matches `timespec::tv_sec` on all ABIs (notably x32).
But since __kernel_old_time_t is fairly new, notably from 2020 in commit
94c467ddb273 ("y2038: add __kernel_old_timespec and __kernel_old_time_t"),
nolibc builds that rely on host headers may fail.
Switch to __kernel_time_t, which is the same as __kernel_old_time_t and
has existed for longer.
Tested in PPC VM of Open Source Lab of Oregon State University
(./tools/testing/selftests/rcutorture/bin/mkinitrd.sh)
Fixes: d5094bcb5bfd ("tools/nolibc: define time_t in terms of __kernel_old_time_t")
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
[Thomas: Reformat commit and its message a bit]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
After LoongArch was converted to use the generic TIF bits in commit
f9629891d407 ("loongarch: Use generic TIF bits"), its TIF_FIXADE flag
takes the same bit with TIF_RESTORE_SIGMASK in thread_info.flags.
Such conflict causes TIF_FIXADE being considered cleared when
TIF_RESTORE_SIGMASK is cleared during deliver of a signal. And since
TIF_FIXADE determines whether unaligned access emulation works for a
task, userspace making use of unaligned access will receive unexpected
SIGBUS (and likely terminate) after receiving its first signal.
This conflict looks like a simple typo, switch it to the free bit 19.
Fixes: f9629891d407 ("loongarch: Use generic TIF bits")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Wentao Guan <guanwentao@uniontech.com>
|
|
translate the "timestamping.rst" into Simplified Chinese.
Update the translation through commit d5c17e36549c
("docs: networking: timestamping: improve stacked PHC sentence")
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: Sun yuxi <sun.yuxi@zte.com.cn>
Reviewed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
|
|
Translate .../security/lsm-development.rst into Chinese.
Update the translation through commit 6d2ed653185b
("lsm: move hook comments docs to security/security.c").
Signed-off-by: Shuo Zhao <zhaoshuo@cqsoftware.com.cn>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Alex Shi <alexs@kernel.org>
|
|
fix the format of proofreader for
Documentation/translations/zh_CN/filesystems/gfs2-uevents.rst
Documentation/translations/zh_CN/filesystems/gfs2.rst
Documentation/translations/zh_CN/filesystems/ubifs-authentication.rst
Documentation/translations/zh_CN/filesystems/ubifs.rst
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
|
|
align title underline for ubifs.rst
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
|
