| Age | Commit message (Collapse) | Author |
|---|
|
Currently we list the main set of registers with bits we test three
times, once in the test_regs array which is used at runtime, once in the
guest code and once in a list of ARRAY_SIZE() operations we use to tell
kselftest how many tests we plan to execute. This is needlessly fiddly,
when adding new registers as the test_cnt calculation is formatted with
two registers per line. Instead count the number of bitfields in the
register arrays at runtime.
The existing code subtracts ARRAY_SIZE(test_regs) from the number of
tests to account for the terminating FTR_REG_END entries in the per
register arrays, the new code accounts for this when enumerating.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Implementations without FEAT_FGT aren't required to trap the entire ID
register space when HCR_EL2.TID3 is set. This is a terrible idea, as the
hypervisor may need to advertise the absence of a feature to the VM
using a negative value in a signed field, FEAT_E2H0 being a great
example of this.
Cope with uncooperative implementations in the EL2 selftest by accepting
a zero value when FEAT_FGT is absent and otherwise only tolerating the
expected nonzero value.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add an embarrassingly simple selftest for sanity checking KVM's VHE EL2
and test that the ID register bits are consistent with HCR_EL2.E2H being
RES1.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Take advantage of VHE to implicitly promote KVM selftests to run at EL2
with only slight modification. Update the smccc_filter test to account
for this now that the EL2-ness of a VM is visible to tests.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Initialize HCR_EL2 such that EL2&0 is considered 'InHost', allowing the
use of (mostly) unmodified EL1 selftests at EL2.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Configuring the number of implemented counters via PMCR_EL0.N was a bad
idea in retrospect as it interacts poorly with nested. Migrate the
selftest to use the vCPU attribute instead of the KVM_SET_ONE_REG
mechanism.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Arch timer registers are redirected to their hypervisor counterparts
when running in VHE EL2. This is great, except for the fact that the
hypervisor timers use different PPIs. Use the correct INTIDs when that
is the case.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
HVCs are taken within the VM when EL2 is in use. Ensure tests use the
SMC instruction when running at EL2 to interact with the host.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The default vCPU target in KVM selftests is pretty boring in that it
doesn't enable any vCPU features. Expose a helper for getting the
default target to prepare for cramming in more features. Call
KVM_ARM_PREFERRED_TARGET directly from get-reg-list as it needs
fine-grained control over feature flags.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
FEAT_VHE has the somewhat nice property of implicitly redirecting EL1
register aliases to their corresponding EL2 representations when E2H=1.
Unfortunately, there's no such abstraction for userspace and EL2
registers are always accessed by their canonical encoding.
Introduce a helper that applies EL2 redirections to sysregs and use
aggressive inlining to catch misuse at compile time. Go a little past
the architectural definition for ease of use for test authors (e.g. the
stack pointer).
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Start creating a VGICv3 by default unless explicitly opted-out by the
test. While having an interrupt controller is nice, the real benefit
here is clearing a hurdle for EL2 VMs which mandate the presence of a
VGIC.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
vgic_v3_setup() has a good bit of sanity checking internally to ensure
that vCPUs have actually been created and match the dimensioning of the
vgic itself. Spin off an unsanitised setup and initialization helper so
vgic initialization can be wired in around a 'default' VM's vCPU
creation.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Introduce a proper predicate for probing VGICv3 by performing a 'test'
creation of the device on a dummy VM.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
vgic_v3_setup() unnecessarily initializes the vgic twice. Keep the
initialization after configuring MMIO frames and get rid of the other.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In order to compel the default usage of EL2 in selftests, move
kvm_arch_vm_post_create() to library code and expose an opt-in for using
MTE by default.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Spell out the syntax instead of only using examples. Particularly
important the <engine-class> part since that's different than
engines_allowed and may confuse users. The same batch buffer is used for
all engines of a certain class.
Cc: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Fixes: e2a9854d806e ("drm/xe/configfs: Allow to select by class only")
Link: https://lore.kernel.org/r/20250924152709.659483-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
If mask is NULL, only the engine class should be accepted, so the
pattern string should be completely parsed. This should fix passing e.g.
rcs0 to ctx_restore_post_bb when it's only expecting the engine class.
Reported-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Closes: https://lore.kernel.org/r/20250922155544.67712-1-jonathan.cavitt@intel.com
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/aNJKnrCQmL9xS9Gv@stanley.mountain
Fixes: e2a9854d806e ("drm/xe/configfs: Allow to select by class only")
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250924152709.659483-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Rafael:
"Fix a locking issue in the cpufreq core introduced recently and caught
by lockdep (Christian Loehle)"
* tag 'pm-6.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Initialize cpufreq-based invariance before subsys
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more regression fix for a problem in zoned mode: mounting would
fail if the number of open and active zones reached a common limit
that didn't use to be checked"
* tag 'for-6.17-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: don't fail mount needlessly due to too many active zones
|
|
Pull smb server fixes from Steve French:
- free_transport fix for disconnect races
- minor delayed work fix
* tag '6.17-rc7-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
smb: server: use disable_work_sync in transport_rdma.c
smb: server: don't use delayed_work for post_recv_credits_work
|
|
Now that AF_XDP functionality is fully implemented, advertise XSk XDP
feature and add .ndo_xsk_wakeup() callback to be able to use it with
this driver.
Co-developed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement Rx packet processing specific to AF_XDP ZC using the libeth
XSk infra. Initialize queue registers before allocating buffers to
avoid redundant ifs when updating the queue tail.
Co-developed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement the XSk transmit path using the libeth (libeth_xdp)
XSk infra.
When the NAPI poll is called, XSk Tx queues are polled first,
before regular Tx and Rx. They're generally faster to serve
and have higher priority comparing to regular traffic.
Co-developed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add functionality to setup an XSk buffer pool, including ability to
stop, reconfig and start only selected queues, not the whole device.
Pool DMA mapping is managed by libeth_xdp.
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement VC functions dedicated to enabling, disabling and configuring
not all but only selected queues.
Also, refactor the existing implementation to make the code more
modular. Introduce new generic functions for sending VC messages
consisting of chunks, in order to isolate the sending algorithm
and its implementation for specific VC messages.
Finally, rewrite the function for mapping queues to q_vectors using the
new modular approach to avoid copying the code that implements the VC
message sending algorithm.
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Co-developed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-09-23
We've added 9 non-merge commits during the last 33 day(s) which contain
a total of 10 files changed, 480 insertions(+), 53 deletions(-).
The main changes are:
1) A new bpf_xdp_pull_data kfunc that supports pulling data from
a frag into the linear area of a xdp_buff, from Amery Hung.
This includes changes in the xdp_native.bpf.c selftest, which
Nimrod's future work depends on.
It is a merge from a stable branch 'xdp_pull_data' which has
also been merged to bpf-next.
There is a conflict with recent changes in 'include/net/xdp.h'
in the net-next tree that will need to be resolved.
2) A compiler warning fix when CONFIG_NET=n in the recent dynptr
skb_meta support, from Jakub Sitnicki.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests: drv-net: Pull data before parsing headers
selftests/bpf: Test bpf_xdp_pull_data
bpf: Support specifying linear xdp packet data size for BPF_PROG_TEST_RUN
bpf: Make variables in bpf_prog_test_run_xdp less confusing
bpf: Clear packet pointers after changing packet data in kfuncs
bpf: Support pulling non-linear xdp data
bpf: Allow bpf_xdp_shrink_data to shrink a frag from head and tail
bpf: Clear pfmemalloc flag when freeing all fragments
bpf: Return an error pointer for skb metadata when CONFIG_NET=n
====================
Link: https://patch.msgid.link/20250924050303.2466356-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the driver supports MSI, set the flag to true. This helps
pci_endpoint_test to use the optimal IRQ type when using
PCITEST_IRQ_TYPE_AUTO.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[mani: splitted this change from the bug fix]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250922140822.519796-6-cassel@kernel.org
|
|
The pci_epc_raise_irq() supplies a MSI or MSI-X interrupt number in range
(1-N), as per the pci_epc_raise_irq() kdoc, where N is 32 for MSI.
But tegra_pcie_ep_raise_msi_irq() incorrectly uses the interrupt number as
the MSI vector. This causes wrong MSI vector to be triggered, leading to
the failure of PCI endpoint Kselftest MSI_TEST test case.
To fix this issue, convert the interrupt number to MSI vector.
Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250922140822.519796-6-cassel@kernel.org
|
|
Alexey Gladkov says:
The modules.builtin.modinfo file is used by userspace (kmod to be specific) to
get information about builtin modules. Among other information about the module,
information about module aliases is stored. This is very important to determine
that a particular modalias will be handled by a module that is inside the
kernel.
There are several mechanisms for creating modalias for modules:
The first is to explicitly specify the MODULE_ALIAS of the macro. In this case,
the aliases go into the '.modinfo' section of the module if it is compiled
separately or into vmlinux.o if it is builtin into the kernel.
The second is the use of MODULE_DEVICE_TABLE followed by the use of the
modpost utility. In this case, vmlinux.o no longer has this information and
does not get it into modules.builtin.modinfo.
For example:
$ modinfo pci:v00008086d0000A36Dsv00001043sd00008694bc0Csc03i30
modinfo: ERROR: Module pci:v00008086d0000A36Dsv00001043sd00008694bc0Csc03i30 not found.
$ modinfo xhci_pci
name: xhci_pci
filename: (builtin)
license: GPL
file: drivers/usb/host/xhci-pci
description: xHCI PCI Host Controller Driver
The builtin module is missing alias "pci:v*d*sv*sd*bc0Csc03i30*" which will be
generated by modpost if the module is built separately.
To fix this it is necessary to add the generated by modpost modalias to
modules.builtin.modinfo. Fortunately modpost already generates .vmlinux.export.c
for exported symbols. It is possible to add `.modinfo` for builtin modules and
modify the build system so that `.modinfo` section is extracted from the
intermediate vmlinux after modpost is executed.
Link: https://patch.msgid.link/cover.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
Since .vmlinux.export.c is used to add generated by modpost modaliases
for builtin modules the .vmlinux.export.o is no longer optional and
should always be created. The generation of this file is not dependent
on CONFIG_MODULES.
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/0e63a9c7741fe8217e4fd7c60afcf057ffa2ef5a.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
For some modules, modalias is generated using the modpost utility and
the section is added to the module file.
When a module is added inside vmlinux, modpost does not generate
modalias for such modules and the information is lost.
As a result kmod (which uses modules.builtin.modinfo in userspace)
cannot determine that modalias is handled by a builtin kernel module.
$ cat /sys/devices/pci0000:00/0000:00:14.0/modalias
pci:v00008086d0000A36Dsv00001043sd00008694bc0Csc03i30
$ modinfo xhci_pci
name: xhci_pci
filename: (builtin)
license: GPL
file: drivers/usb/host/xhci-pci
description: xHCI PCI Host Controller Driver
Missing modalias "pci:v*d*sv*sd*bc0Csc03i30*" which will be generated by
modpost if the module is built separately.
To fix this it is necessary to generate the same modalias for vmlinux as
for the individual modules. Fortunately '.vmlinux.export.o' is already
generated from which '.modinfo' can be extracted in the same way as for
vmlinux.o.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/28d4da3b0e3fc8474142746bcf469e03752c3208.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
At this point, if a symbol is compiled as part of the kernel,
information about which module the symbol belongs to is lost.
To save this it is possible to add the module name to the alias name.
It's not very pretty, but it's possible for now.
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: rust-for-linux@vger.kernel.org
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/1a0d0bd87a4981d465b9ed21e14f4e78eaa03ded.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
The blogic_pci_tbl structure is used by the MODULE_DEVICE_TABLE macro.
There is no longer a need to protect it with the MODULE condition, since
this no longer causes the compiler to warn about an unused variable.
To avoid warnings when -Wunused-const-variable option is used, mark it
as __maybe_unused for such configuration.
Cc: Khalid Aziz <khalid@gonehiking.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Suggested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://patch.msgid.link/fd8e30de07de79a4923ae967eaee5ba2f2fcef00.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
Currently, we assume all the data for modules.builtin.modinfo are
available in vmlinux.o.
This makes it impossible for modpost, which is invoked after vmlinux.o,
to add additional module info.
This commit moves the modules.builtin.modinfo rule after modpost.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/cdb3e5b9a739666b755cd0097dc34ab69c350e51.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
Keep the .modinfo section during linking, but strip it from the final
vmlinux.
Adjust scripts/mksysmap to exclude modinfo symbols from kallsyms.
This change will allow the next commit to extract the .modinfo section
from the vmlinux.unstripped intermediate.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/aaf67c07447215463300fccaa758904bac42f992.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
Generate the intermediate vmlinux.unstripped regardless of
CONFIG_ARCH_VMLINUX_NEEDS_RELOCS.
If CONFIG_ARCH_VMLINUX_NEEDS_RELOCS is unset, vmlinux.unstripped and
vmlinux are identiacal.
This simplifies the build rule, and allows to strip more sections
by adding them to remove-section-y.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/a48ca543fa2305bd17324f41606dcaed9b19f2d4.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
In the upcoming changes, the ELF_DETAILS macro will be extended with
the ".modinfo" section, which will cause an error:
>> s390x-linux-ld: .tmp_vmlinux1: warning: allocated section `.modinfo' not in segment
>> s390x-linux-ld: .tmp_vmlinux2: warning: allocated section `.modinfo' not in segment
>> s390x-linux-ld: vmlinux.unstripped: warning: allocated section `.modinfo' not in segment
This happens because the .vmlinux.info use :NONE to override the default
segment and tell the linker to not put the section in any segment at all.
To avoid this, we need to change the sections order that will be placed
in the default segment.
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506062053.zbkFBEnJ-lkp@intel.com/
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://patch.msgid.link/20d40a7a3a053ba06a54155e777dcde7fdada1db.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
The kexec code will call set_pages_state() after tearing down all the GHCBs,
which will therefore result in a call to early_set_pages_state().
This means the __init annotation is wrong, and must be dropped.
Fixes: c5c30a373693 ("x86/boot: Move startup code out of __head section")
Reported-by: Srikanth Aithal <Srikanth.Aithal@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Srikanth Aithal <Srikanth.Aithal@amd.com>
|
|
./arch/arm64/kernel/cpufeature.c: asm/mmu.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
* for-next/vdso:
arm64: vdso32: Respect -Werror from kbuild
arm64: vdso32: Stop suppressing warnings
|
|
* for-next/uprobes:
arm64: probes: Fix incorrect bl/blr address and register usage
uprobes: uprobe_warn should use passed task
arm64: Kconfig: Remove GCS restrictions on UPROBES
arm64: uprobes: Add GCS support to uretprobes
arm64: probes: Add GCS support to bl/blr/ret
arm64: uaccess: Add additional userspace GCS accessors
arm64: uaccess: Move existing GCS accessors definitions to gcs.h
arm64: probes: Break ret out from bl/blr
|
|
* for-next/sysregs:
arm64/sysreg: Update TCR_EL1 register
arm64: sysreg: Add validation checks to sysreg header generation script
arm64: sysreg: Correct sign definitions for EIESB and DoubleLock
arm64: sysreg: Fix and tidy up sysreg field definitions
|
|
* for-next/selftests:
kselftest/arm64: Add lsfe to the hwcaps test
kselftest/arm64: Check that unsupported regsets fail in sve-ptrace
kselftest/arm64: Verify that we reject out of bounds VLs in sve-ptrace
kselftest/arm64/gcs/basic-gcs: Respect parent directory CFLAGS
selftests/arm64: Fix grammatical error in string literals
kselftest/arm64: Add parentheses around sizeof for clarity
kselftest/arm64: Supress warning and improve readability
kselftest/arm64: Remove extra blank line
kselftest/arm64/gcs: Use nolibc's getauxval()
kselftest/arm64/gcs: Correctly check return value when disabling GCS
selftests: arm64: Fix -Waddress warning in tpidr2 test
kselftest/arm64: Log error codes in sve-ptrace
selftests: arm64: Check fread return value in exec_target
|
|
* for-next/perf: (29 commits)
perf/dwc_pcie: Fix use of uninitialized variable
Documentation: hisi-pmu: Add introduction to HiSilicon V3 PMU
Documentation: hisi-pmu: Fix of minor format error
drivers/perf: hisi: Add support for L3C PMU v3
drivers/perf: hisi: Refactor the event configuration of L3C PMU
drivers/perf: hisi: Extend the field of tt_core
drivers/perf: hisi: Extract the event filter check of L3C PMU
drivers/perf: hisi: Simplify the probe process of each L3C PMU version
drivers/perf: hisi: Export hisi_uncore_pmu_isr()
drivers/perf: hisi: Relax the event ID check in the framework
perf: Fujitsu: Add the Uncore PMU driver
perf/arm-cmn: Fix CMN S3 DTM offset
perf: arm_spe: Prevent overflow in PERF_IDX2OFF()
coresight: trbe: Prevent overflow in PERF_IDX2OFF()
MAINTAINERS: Remove myself from HiSilicon PMU maintainers
drivers/perf: hisi: Add support for HiSilicon MN PMU driver
drivers/perf: hisi: Add support for HiSilicon NoC PMU
perf: arm_pmuv3: Factor out PMCCNTR_EL0 use conditions
arm64/boot: Enable EL2 requirements for SPE_FEAT_FDS
arm64/boot: Factor out a macro to check SPE version
...
|
|
* for-next/mm:
arm64: map [_text, _stext) virtual address range non-executable+read-only
arm64: Enable vmalloc-huge with ptdump
arm64: mm: split linear mapping if BBML2 unsupported on secondary CPUs
arm64: mm: support large block mapping when rodata=full
arm64: Enable permission change on arm64 kernel block mappings
arm64/Kconfig: Remove CONFIG_RODATA_FULL_DEFAULT_ENABLED
arm64: mm: Rework the 'rodata=' options
arm64: mm: Represent physical memory with phys_addr_t and resource_size_t
arm64: mm: Make map_fdt() return mapped pointer
arm64: mm: Cast start/end markers to char *, not u64
|
|
* for-next/misc:
arm64: Kconfig: Make CPU_BIG_ENDIAN depend on BROKEN
arm64: Kconfig: Spell out "ARMv9.4" in menuconfig text
arm64/fpsimd: simplify sme_setup()
|
|
* for-next/entry:
arm/syscalls: mark syscall invocation as likely in invoke_syscall
arm64: entry: Switch to generic IRQ entry
arm64: entry: Move arm64_preempt_schedule_irq() into __exit_to_kernel_mode()
arm64: entry: Refactor preempt_schedule_irq() check code
entry: Add arch_irqentry_exit_need_resched() for arm64
arm64: entry: Use preempt_count() and need_resched() helper
arm64: entry: Rework arm64_preempt_schedule_irq()
arm64: entry: Refactor the entry and exit for exceptions from EL1
arm64: ptrace: Replace interrupts_enabled() with regs_irqs_disabled()
|
|
* for-next/docs:
arm64/sme: Drop inaccurate documentation of streaming mode switches
|
|
* for-next/cpufeature:
arm64: cpufeature: add Neoverse-V3AE to BBML2 allow list
arm64: errata: Apply workarounds for Neoverse-V3AE
arm64: cputype: Add Neoverse-V3AE definitions
arm64: cpufeature: add AmpereOne to BBML2 allow list
arm64: cpufeature: Add Olympus MIDR to BBML2 allow list
arm64: cputype: Add NVIDIA Olympus definitions
arm64: cputype: Remove duplicate Cortex-X1C definitions
arm64: errata: Expand speculative SSBS workaround for Cortex-A720AE
arm64: cputype: Add Cortex-A720AE definitions
arm64/hwcap: Add hwcap for FEAT_LSFE
|
|
* for-next/cca:
arm64: acpi: Enable ACPI CCEL support
arm64: Enable EFI secret area Securityfs support
arm64: realm: ioremap: Allow mapping memory as encrypted
|
