| Age | Commit message (Collapse) | Author |
|---|
|
During kexec reboots, RTC alarms that are fired during the kernel
transition experience delayed execution. The new kernel would eventually
honor these alarms, but the interrupt handlers would only execute after
the driver probe is completed rather than at the intended alarm time.
This is because pending alarm interrupt status from the previous kernel
is not properly cleared during driver initialization, causing timing
discrepancies in alarm delivery.
To ensure precise alarm timing across kexec transitions, enhance the
probe function to:
1. Clear any pending alarm interrupt status from previous boot.
2. Detect existing valid alarms and preserve their state.
3. Re-enable alarm interrupts for future alarms.
Signed-off-by: Harini T <harini.t@amd.com>
Link: https://lore.kernel.org/r/20250730142110.2354507-1-harini.t@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Convert a global variable into a local one of aml_rtc_probe().
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250722-rtc-regmap-v2-1-58bc17187a11@amlogic.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
It is common to include the I2C address of the device in the source
file.
Signed-off-by: Tóth János <gomba007@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
There is only one HID RTC, the following symbols are for on-SoC RTCs
Link: https://lore.kernel.org/r/20251005203048.3759240-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Fix sparse warningg:
drivers/rtc/rtc-optee.c:714:1: sparse: sparse: symbol 'optee_rtc_pm_ops' was not
declared. Should it be static?
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509230549.L26lw7UZ-lkp@intel.com/
Link: https://lore.kernel.org/r/20251005201925.3757345-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"Only two patch series in this pull request:
- "mm/memory_hotplug: fixup crash during uevent handling" from Hannes
Reinecke fixes a race that was causing udev to trigger a crash in
the memory hotplug code
- "mm_slot: following fixup for usage of mm_slot_entry()" from Wei
Yang adds some touchups to the just-merged mm_slot changes"
* tag 'mm-stable-2025-10-03-16-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/khugepaged: use KMEM_CACHE()
mm/ksm: cleanup mm_slot_entry() invocation
Documentation/mm: drop pxx_mkdevmap() descriptions from page table helpers
mm: clean up is_guard_pte_marker()
drivers/base: move memory_block_add_nid() into the caller
mm/memory_hotplug: activate node before adding new memory blocks
drivers/base/memory: add node id parameter to add_memory_block()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Document what OVMF stands for (Open Virtual Machine Firmware)
- Clear NX restrictions also from 'more reliable' type memory when
using the DXE service API
* tag 'efi-next-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/x86: Memory protection on EfiGcdMemoryTypeMoreReliable
efi: Explain OVMF acronym in OVMF_DEBUG_LOG help text
|
|
Return "optee_alarm" instead of "alarm". The "alarm" pointer is a valid
pointer and not an error pointer.
Fixes: 6266aea864fa ("rtc: optee: add alarm related rtc ops to optee rtc driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/9e3718fe1128964907619ad325c0c5f5c1354ace.1758182509.git.dan.carpenter@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Return an error code if kthread_create() fails. Currently the code
returns success.
Fixes: 6266aea864fa ("rtc: optee: add alarm related rtc ops to optee rtc driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/21f1a18008f1bbc8f70d0bd5c05b72fbf5fc9c7d.1758182509.git.dan.carpenter@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Convert the APM XGene RTC binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250924222848.2949235-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Just a couple of changes: crypto code cleanup and a IMA xattr bug fix"
* tag 'integrity-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: don't clear IMA_DIGSIG flag when setting or removing non-IMA xattr
lib/digsig: Use SHA-1 library instead of crypto_shash
integrity: Select CRYPTO from INTEGRITY_ASYMMETRIC_KEYS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- switch longson32 platform to DT and use MIPS_GENERIC framework
- cleanups/fixes for lantiq DTs
- other cleanups and fixes
* tag 'mips_6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
mips: math-emu: replace deprecated strcpy() in me-debugfs
MIPS: configs: Consolidate Loongson1 defconfigs
MIPS: Unify Loongson1 PRID_REV
MIPS: loongson32: Switch to generic core
MIPS: loongson: Add built-in DTB support
MIPS: dts: loongson: Add CQ-T300B board
MIPS: dts: loongson: Add Smartloong-1C board
MIPS: dts: loongson: Add LSGZ_1B_DEV board
MIPS: dts: loongson: Add LS1B-DEMO board
dt-bindings: mips: loongson: Add LS1B-DEMO and CQ-T300B
mips: lantiq: danube: rename stp node on EASY50712 reference board
mips: lantiq: xway: sysctrl: rename stp clock
MIPS: RB532: Replace deprecated strcpy() with memcpy() and strscpy()
MIPS: Loongson64: Replace deprecated strcpy() with strscpy_pad()
MIPS: generic: Replace deprecated strcpy() in ocelot_detect()
MIPS: octeon: Replace deprecated strcpy() in octeon_model_get_string_buffer()
MIPS: octeon: Replace memset(0) + deprecated strcpy() with strscpy_pad()
MIPS: arc: Replace deprecated strcpy() with memcpy()
MIPS: txx9: Replace deprecated strcpy() with strscpy()
MIPS: sni: Replace deprecated strcpy() in sni_console_setup()
...
|
|
Pull OpenRISC updates from Stafford Horne:
"I picked up one series from Chen Miao, our Google Summer of Code
contributor, which adds OpenRISC support for static keys"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: Add jump label support
openrisc: Regenerate defconfigs.
openrisc: Add R_OR1K_32_PCREL relocation type module support
openrisc: Add text patching API support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Use READ_ONCE() and WRITE_ONCE() instead of RCU for syscall
tracepoints
Individual system call trace events are pseudo events attached to the
raw_syscall trace events that just trace the entry and exit of all
system calls. When any of these individual system call trace events
get enabled, an element in an array indexed by the system call number
is assigned to the trace file that defines how to trace it. When the
trace event triggers, it reads this array and if the array has an
element, it uses that trace file to know what to write it (the trace
file defines the output format of the corresponding system call).
The issue is that it uses rcu_dereference_ptr() and marks the
elements of the array as using RCU. This is incorrect. There is no
RCU synchronization here. The event file that is pointed to has a
completely different way to make sure its freed properly. The reading
of the array during the system call trace event is only to know if
there is a value or not. If not, it does nothing (it means this
system call isn't being traced). If it does, it uses the information
to store the system call data.
The RCU usage here can simply be replaced by READ_ONCE() and
WRITE_ONCE() macros.
- Have the system call trace events use "0x" for hex values
Some system call trace events display hex values but do not have "0x"
in front of it. Seeing "count: 44" can be assumed that it is 44
decimal when in actuality it is 44 hex (68 decimal). Display "0x44"
instead.
- Use vmalloc_array() in tracing_map_sort_entries()
The function tracing_map_sort_entries() used array_size() and
vmalloc() when it could have simply used vmalloc_array().
- Use for_each_online_cpu() in trace_osnoise.c()
Instead of open coding for_each_cpu(cpu, cpu_online_mask), use
for_each_online_cpu().
- Move the buffer field in struct trace_seq to the end
The buffer field in struct trace_seq is architecture dependent in
size, and caused padding for the fields after it. By moving the
buffer to the end of the structure, it compacts the trace_seq
structure better.
- Remove redundant zeroing of cmdline_idx field in
saved_cmdlines_buffer()
The structure that contains cmdline_idx is zeroed by memset(), no
need to explicitly zero any of its fields after that.
- Use system_percpu_wq instead of system_wq in user_event_mm_remove()
As system_wq is being deprecated, use the new wq.
- Add cond_resched() is ftrace_module_enable()
Some modules have a lot of functions (thousands of them), and the
enabling of those functions can take some time. On non preemtable
kernels, it was triggering a watchdog timeout. Add a cond_resched()
to prevent that.
- Add a BUILD_BUG_ON() to make sure PID_MAX_DEFAULT is always a power
of 2
There's code that depends on PID_MAX_DEFAULT being a power of 2 or it
will break. If in the future that changes, make sure the build fails
to ensure that the code is fixed that depends on this.
- Grab mutex_lock() before ever exiting s_start()
The s_start() function is a seq_file start routine. As s_stop() is
always called even if s_start() fails, and s_stop() expects the
event_mutex to be held as it will always release it. That mutex must
always be taken in s_start() even if that function fails.
* tag 'trace-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix lock imbalance in s_start() memory allocation failure path
tracing: Ensure optimized hashing works
ftrace: Fix softlockup in ftrace_module_enable
tracing: replace use of system_wq with system_percpu_wq
tracing: Remove redundant 0 value initialization
tracing: Move buffer in trace_seq to end of struct
tracing/osnoise: Use for_each_online_cpu() instead of for_each_cpu()
tracing: Use vmalloc_array() to improve code
tracing: Have syscall trace events show "0x" for values greater than 10
tracing: Replace syscall RCU pointer assignment with READ/WRITE_ONCE()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt
- This is mostly just consolidating code between osnoise/timerlat and
top/hist for easier maintenance and less future divergence
* tag 'trace-tools-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rtla: Add remaining support for osnoise actions
tools/rtla: Add test engine support for unexpected output
tools/rtla: Fix -A option name in test comment
tools/rtla: Consolidate code between osnoise/timerlat and hist/top
tools/rtla: Create common_apply_config()
tools/rtla: Move top/hist params into common struct
tools/rtla: Consolidate common parameters into shared structure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe fix from Masami Hiramatsu:
- Fix race condition in kprobe initialization causing NULL pointer
dereference. This happens on weak memory model, which does not
correctly manage the flags access with appropriate memory barriers.
Use RELEASE-ACQUIRE to fix it.
* tag 'probes-fixes-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix race condition in kprobe initialization causing NULL pointer dereference
|
|
1. Increase NR_CPUS to 2048.
2. Enable KEXEC_FILE options.
3. Enable some EXT4/XFS options.
4. Enable Loongson PWM/MMC/BMC/SE drivers.
5. Enable simple DRM driver.
6. Enable some Intel ethernet drivers.
7. Enable some gpio drivers.
8. Enable some network options.
9. Enable SM3/SM4 cryptographic algorithms.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the 'big' set of staging driver changes for 6.18-rc1. Nothing
really exciting in here they pretty much consist of:
- minor coding style changes and cleanups
- some api layer removals where not needed
Overall a quiet development cycle.
All have been in linux-next for a while with no reported issues"
* tag 'staging-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (63 commits)
staging: rtl8723bs: xmit: rephrase comment and drop extra space
staging: sm750fb: rename camel case variable
staging: rtl8723bs: hal: put return type and function name on one line
staging: rtl8723bs: fix typo in comment
staging: sm750fb: rename snake case variables
staging: sm750fb: remove unnecessary volatile qualifiers
staging: rtl8723bs: rtw_efuse.h: simplify copyright banner
staging: rtl8723bs: remove unused tables
staging: rtl8723bs: Hal_EfuseParseAntennaDiversity_8723B is empty
staging: rtl8723bs: remove REG_EFUSE_ACCESS_8723 and EFUSE_ACCESS_ON_8723
staging: rtl8723bs: remove bWrite from Hal_EfusePowerSwitch
staging: rtl8723bs: remove wrapper Efuse_PowerSwitch
staging: octeon: Clean up dead code in ethernet-tx.c
staging: rtl8723bs: fix fortify warnings by using struct_group
staging: gpib: use int type to store negative error codes
staging: rtl8723bs: remove include/recv_osdep.h
staging: rtl8723bs: remove os_dep/recv_linux.c
staging: rtl8723bs: rename rtw_os_recv_indicate_pkt
staging: rtl8723bs: move rtw_os_recv_indicate_pkt to rtw_recv.c
staging: rtl8723bs: rename rtw_os_alloc_msdu_pkt
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
was another normal development cycle, with lots of the usual drivers
getting updates:
- Thunderbolt driver cleanups and additions
- dwc3 driver updates
- dwc2 driver updates
- typec driver updates
- xhci driver updates and additions
- offload USB engine updates for better power management
- unused tracepoint removals
- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers
- new USB device ids
- other minor driver USB driver updates
- new USB I/O driver framework and driver additions"
The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective
subsystem maintainers.
All of these have been in linux-next for a while"
* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
usb: vhci-hcd: Prevent suspending virtually attached devices
USB: serial: option: add SIMCom 8230C compositions
thunderbolt: Fix use-after-free in tb_dp_dprx_work
usb: xhci: align PORTSC trace with one-based port numbering
usb: xhci: correct indentation for PORTSC tracing function
usb: xhci: improve TR Dequeue Pointer mask
usb: xhci-pci: add support for hosts with zero USB3 ports
usb: xhci: Update a comment about Stop Endpoint retries
Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
usb: gadget: f_rndis: Refactor bind path to use __free()
usb: gadget: f_ecm: Refactor bind path to use __free()
usb: gadget: f_acm: Refactor bind path to use __free()
usb: gadget: f_ncm: Refactor bind path to use __free()
usb: gadget: Introduce free_usb_request helper
usb: gadget: Store endpoint pointer in usb_request
usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
usb: host: xhci-rcar: Move R-Car reg definitions
dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here are some small updates for tty/serial drivers for 6.18-rc1.
Not many changes overall, just the usual:
- abi cleanups and reworking of the tty functions by Jiri by adding
console lock guard logic
- 8250_platform driver updates
- qcom-geni driver updates
- other minor serial driver updates
- some more vt escape codes added
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (43 commits)
tty: serial: fix help message for SERIAL_CPM
serial: 8250: omap: Support wakeup pinctrl state on suspend
dt-bindings: serial: 8250_omap: Add wakeup pinctrl state
serial: max310x: improve interrupt handling
vt: move vc_saved_screen to within tty allocated judgment
Revert "m68k: make HPDCA and HPAPCI bools"
tty: remove redundant condition checks
tty/vt: Add missing return value for VT_RESIZE in vt_ioctl()
vt: remove redundant check on vc_mode in con_font_set()
serial: qcom-geni: Add DFS clock mode support to GENI UART driver
m68k: make HPDCA and HPAPCI bools
tty: n_gsm: Don't block input queue by waiting MSC
serial: qcom-geni: Fix off-by-one error in ida_alloc_range()
serdev: Drop dev_pm_domain_detach() call
serial: sc16is7xx: drop redundant conversion to bool
vt: add support for smput/rmput escape codes
serial: stm32: allow selecting console when the driver is module
serial: 8250_core: fix coding style issue
tty: serial: Modify the use of dev_err_probe()
s390/char/con3270: use tty_port_tty guard()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD core:
- Bad blocks increment is skipped if the block is already known bad
(improves user statistics relevance)
- Expose the OOB layout via debugfs
Raw NAND:
- Add support for Loongson-2K1000 and Loongson-2K0500 NAND
controllers, including extra features, such as chip select
and 6-byte NAND ID reading support
- Drop the s3c2410 driver
SPI NAND:
- Important SPI NAND continuous read improvements and fixes
- Add support for FudanMicro FM25S01A
- Add support for continuous reads in Gigadevice vendor driver
ECC:
- Add support for the Realtek ECC engine
SPI NOR:
- Some flashes can't perform reads or writes with start or end being
an odd number in Octal DTR mode. File systems like UBIFS can
request such reads or writes, causing the transaction to error out.
Pad the read or write transactions with extra bytes to avoid this
problem.
And the usual amount of various miscellaneous fixes"
* tag 'mtd/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (46 commits)
mtd: rawnand: sunxi: drop unused module alias
mtd: rawnand: stm32_fmc2: drop unused module alias
mtd: rawnand: rockchip: drop unused module alias
mtd: rawnand: pl353: drop unused module alias
mtd: rawnand: omap2: drop unused module alias
mtd: rawnand: atmel: drop unused module alias
mtd: onenand: omap2: drop unused module alias
mtd: hyperbus: hbmc-am654: drop unused module alias
mtd: jedec_probe: use struct_size() helper for cfiq allocation
mtd: cfi: use struct_size() helper for cfiq allocation
mtd: nand: raw: gpmi: fix clocks when CONFIG_PM=N
mtd: rawnand: omap2: fix device leak on probe failure
mtd: rawnand: atmel: Fix error handling path in atmel_nand_controller_add_nands
mtd: nand: realtek-ecc: Add Realtek external ECC engine support
dt-bindings: mtd: Add realtek,rtl9301-ecc
mtd: spinand: repeat reading in regular mode if continuous reading fails
mtd: spinand: try a regular dirmap if creating a dirmap for continuous reading fails
mtd: spinand: fix direct mapping creation sizes
mtd: rawnand: fsmc: Default to autodetect buswidth
mtd: nand: move nand_check_erased_ecc_chunk() to nand/core
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
- Clean up the dev_pm_domain integration in rpmsg core. Correct module
aliases for the rpmsg char driver.
- Transition Qualcomm SMD and GLINK drivers to strscpy() and fix the
regression in legacy code for acquiring outgoing interrupts using the
non-mailbox based mechanism.
* tag 'rpmsg-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: qcom_smd: Fix fallback to qcom,ipc parse
rpmsg: Use strscpy() instead of strscpy_pad()
rpmsg: core: Drop dev_pm_domain_detach() call
rpmsg: char: Export alias for RPMSG ID rpmsg-raw from table
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Enable coredump support for the i.MX HiFi core remoteproc, and clean
up the i.MX remoteproc driver.
- Introduce remoteprocs on the Qualcomm Milos platform. Gracefully shut
own the ADSP remoteproc when bootloader has loaded the "Lite"
firmware on X Elite. Improve the resource handover procedure to avoid
possibly duplicate handling.
- Transition the TI DA8xx, TI Keystone, and TI Wakeup M3 remoteproc
drivers to handle resources using devres.
* tag 'rproc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (29 commits)
remoteproc: pru: Fix potential NULL pointer dereference in pru_rproc_set_ctable()
remoteproc: qcom: pas: Drop redundant assignment to ret
remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E
remoteproc: qcom: q6v5: Avoid handling handover twice
remoteproc: qcom: q6v5: Avoid disabling handover IRQ twice
remoteproc: qcom: pas: Add Milos remoteproc support
dt-bindings: remoteproc: qcom,milos-pas: Document remoteprocs
remoteproc: qcom_q6v5_mss: support loading MBN file on msm8974
remoteproc: imx_rproc: Clean up after ops introduction
remoteproc: imx_rproc: Simplify IMX_RPROC_SMC switch case
remoteproc: imx_rproc: Simplify IMX_RPROC_SCU_API switch case
remoteproc: imx_rproc: Simplify IMX_RPROC_MMIO switch case
remoteproc: imx_rproc: Move imx_rproc_dcfg closer to imx_rproc_of_match
remoteproc: imx_rproc: Introduce start/stop/detect_mode ops for imx_rproc_dcfg
remoteproc: k3: Correctly release some resources allocated in k3_rproc_request_mbox()
remoteproc: wkup_m3: Use devm_rproc_add() helper
remoteproc: wkup_m3: Use devm_rproc_alloc() helper
remoteproc: wkup_m3: Use devm action to call PM runtime put sync
remoteproc: wkup_m3: Use devm_pm_runtime_enable() helper
remoteproc: keystone: Use devm_rproc_add() helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- haptic touchpad support (Angela Czubak and Jonathan Denose)
- support for audio jack handling on DualSense Playstation controllers
(Cristian Ciocaltea)
- allow HID-BPF to rebind a driver to hid-multitouch (Benjamin
Tissoires)
- rework hidraw ioctls to make them safer (and tested) (Benjamin
Tissoires)
- various PIDFF and universal-PIDFF fixes/improvements (Tomasz Pakuła)
- better configuration of Intel QuickI2C through ACPI (Xinpeng Sun)
- other assorted cleanups and fixes
* tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (58 commits)
HID: playstation: Switch to scoped_guard() in {dualsense|dualshock4}_output_worker()
HID: playstation: Silence sparse warnings for locking context imbalances
HID: playstation: Update SP preamp gain comment line
HID: intel-thc-hid: intel-quicki2c: support ACPI config for advanced features
HID: core: Change hid_driver to use a const char* for name
HID: hidraw: tighten ioctl command parsing
selftests/hid: hidraw: forge wrong ioctls and tests them
selftests/hid: hidraw: add more coverage for hidraw ioctls
selftests/hid: update vmtest.sh for virtme-ng
HID: playstation: Support DualSense audio jack event reporting
HID: playstation: Support DualSense audio jack hotplug detection
HID: playstation: Redefine DualSense input report status field
HID: playstation: Prefer kzalloc(sizeof(*buf)...)
HID: playstation: Document spinlock_t usage
HID: playstation: Fix all alignment and line length issues
HID: playstation: Correct spelling in comment sections
HID: playstation: Replace uint{32,16,8}_t with u{32,16,8}
HID: playstation: Simplify locking with guard() and scoped_guard()
HID: playstation: Add spaces around arithmetic operators
HID: playstation: Make use of bitfield macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/pmf:
- Add support for adjusting PMF PPT and PPT APU thresholds
- Extend custom BIOS inputs for more policies
- Update ta_pmf_action structure to the latest PMF TA
- arm64:
- thinkpad-t14s-ec: Add EC driver for ThinkPad T14s Gen6 Snapdragon
- int3472:
- Increase handshake GPIO delay
- intel/pmc:
- SSRAM support for Lunar Lake and Panther Lake
- Support reading substate requirements data from S0ix blockers
(for platforms starting from Panther Lake)
- Wildcat Lake support
- intel-uncore-freq:
- Solve duplicate sysfs entry warnings
- Present unique domain ID per package
- portwell-ec:
- Support suspend/resume
- Add hwmon support for voltage and temperature
- redmi-wmi:
- Add WMI driver for Redmibook keyboard
- think-lmi:
- Certificate support for ThinkCenter
- x86-android-tables + others:
- Convert away from legacy GPIO APIs
- x86-android-tables:
- Add support for Acer A1-840 tablet
- Fix modules list for Lenovo devices
- Stop using EPROBE_DEFER
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (63 commits)
platform/x86: pcengines-apuv2: Use static device properties
platform/x86: meraki-mx100: Use static device properties
platform/x86: barco-p50-gpio: use software nodes for gpio-leds/keys
platform/x86: x86-android-tablets: Stop using EPROBE_DEFER
platform/x86: x86-android-tablets: Fix modules lists for Lenovo devices
platform/x86: x86-android-tablets: Simplify lenovo_yoga_tab2_830_1050_exit()
platform/x86: x86-android-tablets: Add support for Acer A1-840 tablet
platform/x86: x86-android-tablets: Move Acer info to its own file
platform/x86: x86-android-tablets: Update my email address
platform/x86: x86-android-tablets: Simplify node-group [un]registration
platform/x86: x86-android-tablets: use swnode_group instead of manual registering
platform/x86: x86-android-tablets: replace bat_swnode with swnode_group
platform/x86: x86-android-tablets: convert gpio_keys devices to GPIO references
platform/x86: x86-android-tablets: remove support for GPIO lookup tables
platform/x86: x86-android-tablets: convert Yoga Tab2 fast charger to GPIO references
platform/x86: x86-android-tablets: convert HID-I2C devices to GPIO references
platform/x86: x86-android-tablets: convert wm1502 devices to GPIO references
platform/x86: x86-android-tablets: convert int3496 devices to GPIO references
platform/x86: x86-android-tablets: convert EDT devices to GPIO references
platform/x86: x86-android-tablets: convert Novatek devices to GPIO references
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys updates from Jarkko Sakkinen:
"A few minor updates/fixes for keys"
* tag 'keys-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
security: keys: use menuconfig for KEYS symbol
KEYS: encrypted: Use SHA-256 library instead of crypto_shash
KEYS: trusted_tpm1: Move private functionality out of public header
KEYS: trusted_tpm1: Use SHA-1 library instead of crypto_shash
KEYS: trusted_tpm1: Compare HMAC values in constant time
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Drivers:
- Add ciphertext hiding support to ccp
- Add hashjoin, gather and UDMA data move features to hisilicon
- Add lz4 and lz77_only to hisilicon
- Add xilinx hwrng driver
- Add ti driver with ecb/cbc aes support
- Add ring buffer idle and command queue telemetry for GEN6 in qat
Others:
- Use rcu_dereference_all to stop false alarms in rhashtable
- Fix CPU number wraparound in padata"
* tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (78 commits)
dt-bindings: rng: hisi-rng: convert to DT schema
crypto: doc - Add explicit title heading to API docs
hwrng: ks-sa - fix division by zero in ks_sa_rng_init
KEYS: X.509: Fix Basic Constraints CA flag parsing
crypto: anubis - simplify return statement in anubis_mod_init
crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs
crypto: hisilicon/qm - clear all VF configurations in the hardware
crypto: hisilicon - enable error reporting again
crypto: hisilicon/qm - mask axi error before memory init
crypto: hisilicon/qm - invalidate queues in use
crypto: qat - Return pointer directly in adf_ctl_alloc_resources
crypto: aspeed - Fix dma_unmap_sg() direction
rhashtable: Use rcu_dereference_all and rcu_dereference_all_check
crypto: comp - Use same definition of context alloc and free ops
crypto: omap - convert from tasklet to BH workqueue
crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user()
crypto: caam - double the entropy delay interval for retry
padata: WQ_PERCPU added to alloc_workqueue users
padata: replace use of system_unbound_wq with system_dfl_wq
crypto: cryptd - WQ_PERCPU added to alloc_workqueue users
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"The changes include adding poison injection support, fixing CXL access
coordinates when onlining CXL memory, and delaing the enumeration of
downstream switch ports for CXL hierarchy to ensure that the CXL link
is established at the time of enumeration to address a few issues
observed on AMD and Intel platforms.
Misc changes:
- Use str_plural() instead of open code for emitting strings.
- Use str_enabled_disabled() instead of ternary operator
- Fix emit of type resource_size_t argument for
validate_region_offset()
- Typo fixup in CXL driver-api documentation
- Rename CFMWS coherency restriction defines
- Add convention doc describe dealing with x86 low memory hole
and CXL
Poison Inject support:
- Move hpa_to_spa callback to new reoot decoder ops structure
- Define a SPA to HPA callback for interleave calculation with
XOR math
- Add support for SPA to DPA address translation with XOR
- Add locked variants of poison inject and clear functions
- Add inject and clear poison support by region offset
CXL access coordinates update fix:
- A comment update for hotplug memory callback prority defines
- Add node_update_perf_attrs() for updating perf attrs on a node
- Update cxl_access_coordinates() to use the new node update function
- Remove hmat_update_target_coordinates() and related code
CXL delayed downstream port enumeration and initialization:
- Add helper to detect top of CXL device topology and remove
open coding
- Add helper to delete single dport
- Add a cached copy of target_map to cxl_decoder
- Refactor decoder setup to reduce cxl_test burden
- Defer dport allocation for switch ports
- Add mock version of devm_cxl_add_dport_by_dev() for cxl_test
- Adjust the mock version of devm_cxl_switch_port_decoders_setup()
due to cxl core usage
- Setup target_map for cxl_test decoder initialization
- Change SSLBIS handler to handle single dport
- Move port register setup to when first dport appears"
* tag 'cxl-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (25 commits)
cxl: Move port register setup to when first dport appear
cxl: Change sslbis handler to only handle single dport
cxl/test: Setup target_map for cxl_test decoder initialization
cxl/test: Adjust the mock version of devm_cxl_switch_port_decoders_setup()
cxl/test: Add mock version of devm_cxl_add_dport_by_dev()
cxl: Defer dport allocation for switch ports
cxl/test: Refactor decoder setup to reduce cxl_test burden
cxl: Add a cached copy of target_map to cxl_decoder
cxl: Add helper to delete dport
cxl: Add helper to detect top of CXL device topology
cxl: Documentation/driver-api/cxl: Describe the x86 Low Memory Hole solution
cxl/acpi: Rename CFMW coherency restrictions
Documentation/driver-api: Fix typo error in cxl
acpi/hmat: Remove now unused hmat_update_target_coordinates()
cxl, acpi/hmat: Update CXL access coordinates directly instead of through HMAT
drivers/base/node: Add a helper function node_update_perf_attrs()
mm/memory_hotplug: Update comment for hotplug memory callback priorities
cxl: Fix emit of type resource_size_t argument for validate_region_offset()
cxl/region: Add inject and clear poison by region offset
cxl/core: Add locked variants of the poison inject and clear funcs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Paul McKenney:
"Documentation updates:
- Update whatisRCU.rst and checklist.rst for recent RCU API additions
- Fix RCU documentation formatting and typos
- Replace dead Ottawa Linux Symposium links in RTFP.txt
Miscellaneous RCU updates:
- Document that rcu_barrier() hurries RCU_LAZY callbacks
- Remove redundant interrupt disabling from
rcu_preempt_deferred_qs_handler()
- Move list_for_each_rcu from list.h to rculist.h, and adjust the
include directive in kernel/cgroup/dmem.c accordingly
- Make initial set of changes to accommodate upcoming
system_percpu_wq changes
SRCU updates:
- Create an srcu_read_lock_fast_notrace() for eventual use in
tracing, including adding guards
- Document the reliance on per-CPU operations as implicit RCU readers
in __srcu_read_{,un}lock_fast()
- Document the srcu_flip() function's memory-barrier D's relationship
to SRCU-fast readers
- Remove a redundant preempt_disable() and preempt_enable() pair from
srcu_gp_start_if_needed()
Torture-test updates:
- Fix jitter.sh spin time so that it actually varies as advertised.
It is still quite coarse-grained, but at least it does now vary
- Update torture.sh help text to include the not-so-new --do-normal
parameter, which permits (for example) testing KCSAN kernels
without doing non-debug kernels
- Fix a number of false-positive diagnostics that were being
triggered by rcutorture starting before boot completed. Running
multiple near-CPU-bound rcutorture processes when there is only the
boot CPU is after all a bit excessive
- Substitute kcalloc() for kzalloc()
- Remove a redundant kfree() and NULL out kfree()ed objects"
* tag 'rcu.2025.09.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (31 commits)
rcu: WQ_UNBOUND added to sync_wq workqueue
rcu: WQ_PERCPU added to alloc_workqueue users
rcu: replace use of system_wq with system_percpu_wq
refperf: Set reader_tasks to NULL after kfree()
refperf: Remove redundant kfree() after torture_stop_kthread()
srcu/tiny: Remove preempt_disable/enable() in srcu_gp_start_if_needed()
srcu: Document srcu_flip() memory-barrier D relation to SRCU-fast
srcu: Document __srcu_read_{,un}lock_fast() implicit RCU readers
rculist: move list_for_each_rcu() to where it belongs
refscale: Use kcalloc() instead of kzalloc()
rcutorture: Use kcalloc() instead of kzalloc()
docs: rcu: Replace multiple dead OLS links in RTFP.txt
doc: Fix typo in RCU's torture.rst documentation
Documentation: RCU: Retitle toctree index
Documentation: RCU: Reduce toctree depth
Documentation: RCU: Wrap kvm-remote.sh rerun snippet in literal code block
rcu: docs: Requirements.rst: Abide by conventions of kernel documentation
doc: Add RCU guards to checklist.rst
doc: Update whatisRCU.rst for recent RCU API additions
rcutorture: Delay forward-progress testing until boot completes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Add KUnit test for the printk ring buffer
- Fix the check of the maximal record size which is allowed to be
stored into the printk ring buffer. It prevents corruptions of the
ring buffer.
Note that printk() is on the safe side. The messages are limited by
1kB buffer and are always small enough for the minimal log buffer
size 4kB, see CONFIG_LOG_BUF_SHIFT definition.
* tag 'printk-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: ringbuffer: Fix data block max size check
printk: kunit: support offstack cpumask
printk: kunit: Fix __counted_by() in struct prbtest_rbdata
printk: ringbuffer: Explain why the KUnit test ignores failed writes
printk: ringbuffer: Add KUnit test
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull mm-init update from Mike Rapoport:
"Simplify deferred initialization of struct pages
Refactor and simplify deferred initialization of the memory map.
Beside the negative diffstat it gives 3ms (55ms vs 58ms) reduction in
the initialization of deferred pages on single node system with 64GiB
of RAM"
* tag 'memblock-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: drop for_each_free_mem_pfn_range_in_zone_from()
mm/mm_init: drop deferred_init_maxorder()
mm/mm_init: deferred_init_memmap: use a job per zone
mm/mm_init: use deferred_init_memmap_chunk() in deferred_grow_zone()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Add relocation handling for R_SPARC_UA64 for sparc64 that is
generated by llvm and clarify printout on missing relocation handler
- Fix missing hugetlb tte initialization for sun4u
- Code cleanup for redundant use of __GPF_NOWARN for sparc64
- Fix prototypes of reads[bwl]() for sparc64 by adding missing const
and volatile pointer qualifiers
- Fix bugs in accurate exception reporting in multiple machine specific
sparc64 variants of copy_{from,to}_user() for sparc64
- Fix memory leak in error handling for sparc32
- Drop -ansi from asflags and replace __ASSEMBLY__ with __ASSEMBLER__
in headers for all arch/sparc
- Replace strcpy() with strscpy() for all arch/sparc
* tag 'sparc-for-6.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc: (22 commits)
sparc: Replace deprecated strcpy() with strscpy() in handle_nextprop_quirks()
sparc64: Replace deprecated strcpy() with strscpy() in build_path_component()
sparc: Replace deprecated strcpy() with strscpy() in prom_32.c
sparc: Replace deprecated strcpy() with strscpy() in domain services driver
sparc64: Replace deprecated strcpy() with strscpy() in prom_nextprop()
sparc: floppy: Replace deprecated strcpy() with strscpy() in sun_floppy_init()
sparc: parport: Replace deprecated strcpy() with strscpy() in ecpp_probe()
sparc: PCI: Replace deprecated strcpy() with strscpy()
sparc: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
sparc: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
sparc: Drop the "-ansi" from the asflags
sparc: fix error handling in scan_one_device()
sparc: fix accurate exception reporting in copy_{from,to}_user for M7
sparc: fix accurate exception reporting in copy_to_user for Niagara 4
sparc: fix accurate exception reporting in copy_{from_to}_user for Niagara
sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC III
sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC
sparc64: fix prototypes of reads[bwl]()
sparc64: Remove redundant __GFP_NOWARN
sparc64: fix hugetlb for sun4u
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Paul Walmsley:
- Support for the RISC-V-standardized RPMI interface.
RPMI is a platform management communication mechanism between OSes
running on application processors, and a remote platform management
processor. Similar to ARM SCMI, TI SCI, etc. This includes irqchip,
mailbox, and clk changes.
- Support for the RISC-V-standardized MPXY SBI extension.
MPXY is a RISC-V-specific standard implementing a shared memory
mailbox between S-mode operating systems (e.g., Linux) and M-mode
firmware (e.g., OpenSBI). It is part of this PR since one of its use
cases is to enable M-mode firmware to act as a single RPMI client for
all RPMI activity on a core (including S-mode RPMI activity).
Includes a mailbox driver.
- Some ACPI-related updates to enable the use of RPMI and MPXY.
- The addition of Linux-wide memcpy_{from,to}_le32() static inline
functions, for RPMI use.
- An ACPI Kconfig change to enable boot logos on any ACPI-using
architecture (including RISC-V)
- A RISC-V defconfig change to add GPIO keyboard and event device
support, for front panel shutdown or reboot buttons
* tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (26 commits)
clk: COMMON_CLK_RPMI should depend on RISCV
ACPI: support BGRT table on RISC-V
MAINTAINERS: Add entry for RISC-V RPMI and MPXY drivers
RISC-V: Enable GPIO keyboard and event device in RV64 defconfig
irqchip/riscv-rpmi-sysmsi: Add ACPI support
mailbox/riscv-sbi-mpxy: Add ACPI support
irqchip/irq-riscv-imsic-early: Export imsic_acpi_get_fwnode()
ACPI: RISC-V: Add RPMI System MSI to GSI mapping
ACPI: RISC-V: Add support to update gsi range
ACPI: RISC-V: Create interrupt controller list in sorted order
ACPI: scan: Update honor list for RPMI System MSI
ACPI: Add support for nargs_prop in acpi_fwnode_get_reference_args()
ACPI: property: Refactor acpi_fwnode_get_reference_args() to support nargs_prop
irqchip: Add driver for the RPMI system MSI service group
dt-bindings: Add RPMI system MSI interrupt controller bindings
dt-bindings: Add RPMI system MSI message proxy bindings
clk: Add clock driver for the RISC-V RPMI clock service group
dt-bindings: clock: Add RPMI clock service controller bindings
dt-bindings: clock: Add RPMI clock service message proxy bindings
mailbox: Add RISC-V SBI message proxy (MPXY) based mailbox driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry updates from Dave Hansen:
"A pair of x86/entry updates.
The FRED one adjusts the kernel to the latest spec. The spec change
prevents attackers from abusing kernel entry points.
The second one came about because of the LASS work[1]. It moves the
vsyscall emulation code away from depending on X86_PF_INSTR which is
not available on some CPUs. Those CPUs are pretty obscure these days,
but this still seems like the right thing to do. It also makes this
code consistent with some things that the LASS code is going to do.
- Use RIP instead of X86_PF_INSTR for vsyscall emulation
- Remove ENDBR64 from FRED entry points"
Link: https://lore.kernel.org/lkml/20250620135325.3300848-1-kirill.shutemov@linux.intel.com/ [1]
* tag 'x86_entry_for_6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fred: Remove ENDBR64 from FRED entry points
x86/vsyscall: Do not require X86_PF_INSTR to emulate vsyscall
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm update from Dave Hansen:
"A single change to remove an open-coded TLB flush operation by using
an existing helper. This came out of Rik van Riel's work to get the
INVLPGB instruction working.
- Change cpa_flush() to call flush_kernel_range() directly"
* tag 'x86_mm_for_6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Change cpa_flush() to call flush_kernel_range() directly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"The biggest change here is making TDX and kexec play nicely together.
Before this, the memory encryption hardware (which doesn't respect
cache coherency) could write back old cachelines on top of data in the
new kernel, so kexec and TDX were made mutually exclusive. This
removes the limitation.
There is also some work to tighten up a hardware bug workaround and
some MAINTAINERS updates.
- Make TDX and kexec work together
- Skip TDX bug workaround when the bug is not present
- Update maintainers entries"
* tag 'x86_tdx_for_6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/virt/tdx: Use precalculated TDVPR page physical address
KVM/TDX: Explicitly do WBINVD when no more TDX SEAMCALLs
x86/virt/tdx: Update the kexec section in the TDX documentation
x86/virt/tdx: Remove the !KEXEC_CORE dependency
x86/kexec: Disable kexec/kdump on platforms with TDX partial write erratum
x86/virt/tdx: Mark memory cache state incoherent when making SEAMCALL
x86/sme: Use percpu boolean to control WBINVD during kexec
x86/kexec: Consolidate relocate_kernel() function parameters
x86/tdx: Skip clearing reclaimed pages unless X86_BUG_TDX_PW_MCE is present
x86/tdx: Tidy reset_pamt functions
x86/tdx: Eliminate duplicate code in tdx_clear_page()
MAINTAINERS: Add KVM mail list to the TDX entry
MAINTAINERS: Add Rick Edgecombe as a TDX reviewer
MAINTAINERS: Update the file list in the TDX entry.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"A collection of small cleanups this cycle.
Thorsten Blum has replaced a number strcpy() calls with safer
alternatives (fixing a pointer aliasing bug in the process).
Colin Ian King has simplified things by removing some unreachable
code"
* tag 'kgdb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: remove redundant check for scancode 0xe0
kdb: Replace deprecated strcpy() with helper function in kdb_defcmd()
kdb: Replace deprecated strcpy() with memcpy() in parse_grep()
kdb: Replace deprecated strcpy() with memmove() in vkdb_printf()
kdb: Replace deprecated strcpy() with memcpy() in kdb_strdup()
kernel: debug: gdbstub: Replace deprecated strcpy() with strscpy()
|
|
cppcheck rightfully reports:
drivers/i2c/busses/i2c-mt65xx.c:1464:6: warning: Condition 'ret' is always false [knownConditionTrueFalse]
Make the function void and simplify the code.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Functionally no change. Remove the ambiguity of 'wait_for_completion'.
It helps development of the DEPT dependency tracker, but seems favorable
in any case.
Signed-off-by: Byungchul Park <byungchul@sk.com>
[wsa: reworded commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Introduce paicrypt_free() to centralize memory release for per-CPU
maps and remove duplicated free logic. Replace paicrypt_busy() with
paicrypt_alloc_cpu() returning int error codes instead of ERR_PTR,
and adjust callers accordingly. System-wide allocation now uses
paicrypt_alloc() with consistent error handling. Memory allocation
and free management is now identical to PMU pai_ext.
Reference counting and root anchor management remain unchanged.
Debug output in the destroy path is dropped.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Jan Polensky <japo@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Starting with 'commit 2297791c92d0 ("s390/cio: dont unregister
subchannel from child-drivers")', cio no longer unregisters
subchannels when the attached device is invalid or unavailable.
As an unintended side-effect, the cio_ignore purge function no longer
removes subchannels for devices on the cio_ignore list if no CCW device
is attached. This situation occurs when a CCW device is non-operational
or unavailable
To ensure the same outcome of the purge function as when the
current cio_ignore list had been active during boot, update the purge
function to remove I/O subchannels without working CCW devices if the
associated device number is found on the cio_ignore list.
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The sysfs file /sys/bus/pci/devices/<device_id>/uid_is_unique provides
the UID Checking state as a per device attribute, highlighting its
effect of providing the guarantee that a device's UID is unique.
As a device attribute, this parameter is however unavailable if no
device is configured.
Expose the UID Checking state as:
- A platform-level parameter
- Available regardless of device presence or state
Signed-off-by: Ramesh Errabolu <ramesh@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.18, part 2
rtl9300 updates:
- general cleanups
- implemented block read/write support
- added RTL9310 support
|
|
The commit 1b8abbb12128 ("bpf...d_path(): constify path argument")
constified the first parameter of the bpf_d_path(), but failed to
update it in all places. Finish constification.
Otherwise the selftest fail to build:
.../selftests/bpf/bpf_experimental.h:222:12: error: conflicting types for 'bpf_path_d_path'
222 | extern int bpf_path_d_path(const struct path *path, char *buf, size_t buf__sz) __ksym;
| ^
.../selftests/bpf/tools/include/vmlinux.h:153922:12: note: previous declaration is here
153922 | extern int bpf_path_d_path(struct path *path, char *buf, size_t buf__sz) __weak __ksym;
Fixes: 1b8abbb12128 ("bpf...d_path(): constify path argument")
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull kvm updates from Paolo Bonzini:
"This excludes the bulk of the x86 changes, which I will send
separately. They have two not complex but relatively unusual conflicts
so I will wait for other dust to settle.
guest_memfd:
- Add support for host userspace mapping of guest_memfd-backed memory
for VM types that do NOT use support KVM_MEMORY_ATTRIBUTE_PRIVATE
(which isn't precisely the same thing as CoCo VMs, since x86's
SEV-MEM and SEV-ES have no way to detect private vs. shared).
This lays the groundwork for removal of guest memory from the
kernel direct map, as well as for limited mmap() for
guest_memfd-backed memory.
For more information see:
- commit a6ad54137af9 ("Merge branch 'guest-memfd-mmap' into HEAD")
- guest_memfd in Firecracker:
https://github.com/firecracker-microvm/firecracker/tree/feature/secret-hiding
- direct map removal:
https://lore.kernel.org/all/20250221160728.1584559-1-roypat@amazon.co.uk/
- mmap support:
https://lore.kernel.org/all/20250328153133.3504118-1-tabba@google.com/
ARM:
- Add support for FF-A 1.2 as the secure memory conduit for pKVM,
allowing more registers to be used as part of the message payload.
- Change the way pKVM allocates its VM handles, making sure that the
privileged hypervisor is never tricked into using uninitialised
data.
- Speed up MMIO range registration by avoiding unnecessary RCU
synchronisation, which results in VMs starting much quicker.
- Add the dump of the instruction stream when panic-ing in the EL2
payload, just like the rest of the kernel has always done. This
will hopefully help debugging non-VHE setups.
- Add 52bit PA support to the stage-1 page-table walker, and make use
of it to populate the fault level reported to the guest on failing
to translate a stage-1 walk.
- Add NV support to the GICv3-on-GICv5 emulation code, ensuring
feature parity for guests, irrespective of the host platform.
- Fix some really ugly architecture problems when dealing with debug
in a nested VM. This has some bad performance impacts, but is at
least correct.
- Add enough infrastructure to be able to disable EL2 features and
give effective values to the EL2 control registers. This then
allows a bunch of features to be turned off, which helps cross-host
migration.
- Large rework of the selftest infrastructure to allow most tests to
transparently run at EL2. This is the first step towards enabling
NV testing.
- Various fixes and improvements all over the map, including one BE
fix, just in time for the removal of the feature.
LoongArch:
- Detect page table walk feature on new hardware
- Add sign extension with kernel MMIO/IOCSR emulation
- Improve in-kernel IPI emulation
- Improve in-kernel PCH-PIC emulation
- Move kvm_iocsr tracepoint out of generic code
RISC-V:
- Added SBI FWFT extension for Guest/VM with misaligned delegation
and pointer masking PMLEN features
- Added ONE_REG interface for SBI FWFT extension
- Added Zicbop and bfloat16 extensions for Guest/VM
- Enabled more common KVM selftests for RISC-V
- Added SBI v3.0 PMU enhancements in KVM and perf driver
s390:
- Improve interrupt cpu for wakeup, in particular the heuristic to
decide which vCPU to deliver a floating interrupt to.
- Clear the PTE when discarding a swapped page because of CMMA; this
bug was introduced in 6.16 when refactoring gmap code.
x86 selftests:
- Add #DE coverage in the fastops test (the only exception that's
guest- triggerable in fastop-emulated instructions).
- Fix PMU selftests errors encountered on Granite Rapids (GNR),
Sierra Forest (SRF) and Clearwater Forest (CWF).
- Minor cleanups and improvements
x86 (guest side):
- For the legacy PCI hole (memory between TOLUD and 4GiB) to UC when
overriding guest MTRR for TDX/SNP to fix an issue where ACPI
auto-mapping could map devices as WB and prevent the device drivers
from mapping their devices with UC/UC-.
- Make kvm_async_pf_task_wake() a local static helper and remove its
export.
- Use native qspinlocks when running in a VM with dedicated
vCPU=>pCPU bindings even when PV_UNHALT is unsupported.
Generic:
- Remove a redundant __GFP_NOWARN from kvm_setup_async_pf() as
__GFP_NOWARN is now included in GFP_NOWAIT.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (178 commits)
KVM: s390: Fix to clear PTE when discarding a swapped page
KVM: arm64: selftests: Cover ID_AA64ISAR3_EL1 in set_id_regs
KVM: arm64: selftests: Remove a duplicate register listing in set_id_regs
KVM: arm64: selftests: Cope with arch silliness in EL2 selftest
KVM: arm64: selftests: Add basic test for running in VHE EL2
KVM: arm64: selftests: Enable EL2 by default
KVM: arm64: selftests: Initialize HCR_EL2
KVM: arm64: selftests: Use the vCPU attr for setting nr of PMU counters
KVM: arm64: selftests: Use hyp timer IRQs when test runs at EL2
KVM: arm64: selftests: Select SMCCC conduit based on current EL
KVM: arm64: selftests: Provide helper for getting default vCPU target
KVM: arm64: selftests: Alias EL1 registers to EL2 counterparts
KVM: arm64: selftests: Create a VGICv3 for 'default' VMs
KVM: arm64: selftests: Add unsanitised helpers for VGICv3 creation
KVM: arm64: selftests: Add helper to check for VGICv3 support
KVM: arm64: selftests: Initialize VGICv3 only once
KVM: arm64: selftests: Provide kvm_arch_vm_post_create() in library code
KVM: selftests: Add ex_str() to print human friendly name of exception vectors
selftests/kvm: remove stale TODO in xapic_state_test
KVM: selftests: Handle Intel Atom errata that leads to PMU event overcount
...
|
|
Pull virtio updates from Michael Tsirkin:
"Just fixes and cleanups this time around. The mapping cleanups are
preparing the ground for new features, though"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-vdpa: Drop redundant conversion to bool
vduse: Use fixed 4KB bounce pages for non-4KB page size
vduse: switch to use virtio map API instead of DMA API
vdpa: introduce map ops
vdpa: support virtio_map
virtio: introduce map ops in virtio core
virtio_ring: rename dma_handle to map_handle
virtio: introduce virtio_map container union
virtio: rename dma helpers
virtio_ring: switch to use dma_{map|unmap}_page()
virtio_ring: constify virtqueue pointer for DMA helpers
virtio_balloon: Remove redundant __GFP_NOWARN
vhost: vringh: Fix copy_to_iter return value check
vhost: vringh: Modify the return value check
|
|
Pull VFIO updates from Alex Williamson:
- Use fdinfo to expose the sysfs path of a device represented by a vfio
device file (Alex Mastro)
- Mark vfio-fsl-mc, vfio-amba, and the reset functions for
vfio-platform for removal as these are either orphaned or believed to
be unused (Alex Williamson)
- Add reviewers for vfio-platform to save it from also being marked for
removal (Mostafa Saleh, Pranjal Shrivastava)
- VFIO selftests, including basic sanity testing and minimal userspace
drivers for testing against real hardware. This is also expected to
provide integration with KVM selftests for KVM-VFIO interfaces (David
Matlack, Josh Hilke)
- Fix drivers/cdx and vfio/cdx to build without CONFIG_GENERIC_MSI_IRQ
(Nipun Gupta)
- Fix reference leak in hisi_acc (Miaoqian Lin)
- Use consistent return for unsupported device feature (Alex Mastro)
- Unwind using the correct memory free callback in vfio/pds (Zilin
Guan)
- Use IRQ_DISABLE_LAZY flag to improve handling of pre-PCI2.3 INTx and
resolve stalled interrupt on ppc64 (Timothy Pearson)
- Enable GB300 in nvgrace-gpu vfio-pci variant driver (Tushar Dave)
- Misc:
- Drop unnecessary ternary conversion in vfio/pci (Xichao Zhao)
- Grammatical fix in nvgrace-gpu (Morduan Zang)
- Update Shameer's email address (Shameer Kolothum)
- Fix document build warning (Alex Williamson)
* tag 'vfio-v6.18-rc1' of https://github.com/awilliam/linux-vfio: (48 commits)
vfio/nvgrace-gpu: Add GB300 SKU to the devid table
vfio/pci: Fix INTx handling on legacy non-PCI 2.3 devices
vfio/pds: replace bitmap_free with vfree
vfio: return -ENOTTY for unsupported device feature
hisi_acc_vfio_pci: Fix reference leak in hisi_acc_vfio_debug_init
vfio/platform: Mark reset drivers for removal
vfio/amba: Mark for removal
MAINTAINERS: Add myself as VFIO-platform reviewer
MAINTAINERS: Add myself as VFIO-platform reviewer
docs: proc.rst: Fix VFIO Device title formatting
vfio: selftests: Fix .gitignore for already tracked files
vfio/cdx: update driver to build without CONFIG_GENERIC_MSI_IRQ
cdx: don't select CONFIG_GENERIC_MSI_IRQ
MAINTAINERS: Update Shameer Kolothum's email address
vfio: selftests: Add a script to help with running VFIO selftests
vfio: selftests: Make iommufd the default iommu_mode
vfio: selftests: Add iommufd mode
vfio: selftests: Add iommufd_compat_type1{,v2} modes
vfio: selftests: Add vfio_type1v2_mode
vfio: selftests: Replicate tests across all iommu_modes
...
|
|
Give the KEYS kconfig symbol and its associated symbols a separate menu
space under Security options by using "menuconfig" instead of "config".
This also makes it easier to find the security and LSM options.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Instead of the "sha256" crypto_shash, just use sha256(). Similarly,
instead of the "hmac(sha256)" crypto_shash, just use
hmac_sha256_usingrawkey(). This is simpler and faster.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
