summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-10-13pinctrl: qcom: glymur: Drop unnecessary platform data from match tableAbel Vesa
The platform specific configuration is already passed on to the generic msm probe. So it's useless to exist in the match table next to the compatible. So drop it from match table. Fixes: 87ebcd8baebf ("pinctrl: qcom: Add glymur pinctrl driver") Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-10-13dt-bindings: pinctrl: qcom: msm8960: rename msmgpio node to tlmmAntony Kurniawan Soemardi
Rename the GPIO controller node from "msmgpio" to "tlmm" to match the convention used by other Qualcomm SoCs. Suggested-by: Shinjo Park <peremen@gmail.com> Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-10-13arm64: dts: mediatek: Add MT6878 pinmux macro header fileIgor Belwon
Add the required macros for the pinmux nodes of the MediaTek MT6878 SoC. Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13arm64: dts: marvell: pxa1908: Add power domainsDuje Mihanović
Update the APMU clock controller's compatible to allow the new power domain driver to probe. Also add the first two power domain consumers: IOMMU (fixes probing) and framebuffer. Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
2025-10-13arm64: dts: marvell: samsung,coreprimevelte: Add USB connectorDuje Mihanović
Add a node for the micro-USB connector found on the board. Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
2025-10-13arm64: dts: marvell: samsung,coreprimevelte: Fill in memory nodeDuje Mihanović
The board is known to have 1 GiB of DRAM with the first 16 MiB unusable. Instead of relying on the bootloader to fill in the memory node, do it ourselves. Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
2025-10-13arm64: dts: marvell: samsung,coreprimevelte: Drop some reserved memoryDuje Mihanović
Most of the memory marked as reserved is actually usable. Delete its reserved-memory nodes so that the memory can be used. Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
2025-10-13arm64: dts: marvell: pxa1908: Move ramoops to SoC dtsiDuje Mihanović
The ramoops memory region is the same for all boards based on the SoC. Move its node to the appropriate dtsi. Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
2025-10-13arm64: dts: marvell: samsung,coreprimevelte: Add vibratorDuje Mihanović
The board has a vibrator hooked up to PWM3. Add a node for it and its associated pinctrl configuration. Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
2025-10-13arm64: dts: marvell: pxa1908: Add PWMsDuje Mihanović
The SoC has 4 onboard PWMs. Add a node for each of them. Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
2025-10-13arm64: dts: marvell: samsung,coreprimevelte: Enable eMMCDuje Mihanović
Commit a41fcca4b342 ("mmc: sdhci-pxav3: set NEED_RSP_BUSY capability") fixed eMMC probing on this board. Enable the eMMC and add its pinctrl. Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
2025-10-13arm64: dts: marvell: samsung,coreprimevelte: Correct CD GPIODuje Mihanović
Right now, the CD GPIO is defined as active high with a cd-inverted property. Just define the GPIO as active low instead. Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
2025-10-13arm64: dts: marvell: samsung,coreprimevelte: Add backlightDuje Mihanović
Add a node for the KTD2801 backlight chip found on the board. Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
2025-10-13arm64: dts: samsung,coreprimevelte: add SDIOKarel Balej
Set some basic properties of the SDIO card of the samsung,coreprimevelte smartphone. The SDIO is used as an interface for WiFi, Bluetooth and FM radio serviced by the Marvell 88W8777 (SD8777) chipset. Support for this chipset is currently not in-tree because the firmware is not available in linux-firmware, however it is possible to trivially run it out-of-tree using the mwifiex and Marvell Bluetooth drivers with some caveats. Link: https://lore.kernel.org/r/20231029111807.19261-1-balejk@matfyz.cz/ Signed-off-by: Karel Balej <balejk@matfyz.cz> Reviewed-by: Duje Mihanović <duje@dujemihanovic.xyz> [Duje: fix formatting of pins_0 and fast_pins_1 pin arrays] Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
2025-10-13arm64: dts: samsung,coreprimevelte: add touchscreenKarel Balej
Bind touchscreen for the samsung,coreprimevelte smartphone. The downstream code sets the VDD voltage to the exact value of 3.1 V, however it's been empirically verified that the lower bound used here sufficies for the proper operation of the chip and is thus used for power-saving purposes. Signed-off-by: Karel Balej <balejk@matfyz.cz> Reviewed-by: Duje Mihanović <duje@dujemihanovic.xyz> Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
2025-10-13arm64: dts: samsung,coreprimevelte: add PMICKarel Balej
Bind power management chip to the samsung,coreprimevelte smartphone. This enables support for onkey and RTC as well as for regulators two of which are explicitly bound here to the SD card. Signed-off-by: Karel Balej <balejk@matfyz.cz> Reviewed-by: Duje Mihanović <duje@dujemihanovic.xyz> Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
2025-10-13dt-bindings: pinctrl: pinctrl-single: add ti,am62l-padconf compatibleBryan Brattlof
Add the "ti,am62l-padconf" compatible to allow for some changes in the driver in the future when needed. Signed-off-by: Bryan Brattlof <bb@ti.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-10-13ASoC: codecs: Fix gain setting ranges for Renesas IDT821034 codecChristophe Leroy
The gain ranges specified in Renesas IDT821034 codec documentation are [-3dB;+13dB] in the transmit path (ADC) and [-13dB;+3dB] in the receive path (DAC). Allthough the registers allow programming values outside those ranges, the signal S/N and distorsion are only guaranteed in the specified ranges. Set ranges to the specified ones. Fixes: e51166990e81 ("ASoC: codecs: Add support for the Renesas IDT821034 codec") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://patch.msgid.link/2bd547194f3398e6182f770d7d6be711c702b4b2.1760029099.git.christophe.leroy@csgroup.eu Signed-off-by: Mark Brown <broonie@kernel.org>
2025-10-13ASoC: tas2781: Update ti,tas2781.yaml for adding tas58xxBaojun Xu
Update ti,tas2781.yaml for adding TAS5802/TAS5815/TAS5828. Signed-off-by: Baojun Xu <baojun.xu@ti.com> Link: https://patch.msgid.link/20251002072925.26242-2-baojun.xu@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-10-13ASoC: tas2781: Support more newly-released amplifiers tas58xx in the driverBaojun Xu
TAS5802/TAS5815/TAS5828 has on-chip DSP without current/voltage feedback. Signed-off-by: Baojun Xu <baojun.xu@ti.com> Link: https://patch.msgid.link/20251002072925.26242-1-baojun.xu@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-10-13ASoC: qcom: sc8280xp: Add support for QCS615Le Qi
Add compatible for sound card on QCS615 boards. Signed-off-by: Le Qi <le.qi@oss.qualcomm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20251009090619.1097388-3-le.qi@oss.qualcomm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-10-13ASoC: dt-bindings: qcom,sm8250: Add QCS615 sound cardLe Qi
Add bindings for QCS615 sound card, which looks fully compatible with existing SM8250. Signed-off-by: Le Qi <le.qi@oss.qualcomm.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20251009090619.1097388-2-le.qi@oss.qualcomm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-10-13Merge existing fixes from spi/for-6.18 into new branchMark Brown
2025-10-13pinctrl: mediatek: Add support for MT6878 pinctrlIgor Belwon
Add driver support for the pin controller found in the MediaTek Dimensity 7300 (MT6878) SoC. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-10-13pinctrl: mediatek: Add debounce times for MT6878Igor Belwon
MT6878 uses different debounce times than other SoCs. Add them to the EINT driver. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-10-13dt-bindings: pinctrl: mediatek: Document MT6878 pin controller bindingsIgor Belwon
Add device-tree bindings for the pin controller and the EINT controller found in the MediaTek MT6878 SoC. Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-10-13ARM: dts: mediatek: add basic support for Alcatel yarisxl boardCristian Cozzolino
This smartphone uses a MediaTek MT6582 system-on-chip with 512MB of RAM. It can currently boot into initramfs with a working UART and Simple Framebuffer using already initialized panel by the bootloader. Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13dt-bindings: arm: mediatek: Add MT6582 yarisxlCristian Cozzolino
Add an entry for Alcatel Pop C7 (OT-7041D) smartphone board, named yarisxl, based on MT6582 SoC. Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13ARM: dts: mediatek: mt6582: add enable-method property to cpusCristian Cozzolino
Add missing property for SMP. Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13ARM: dts: mediatek: mt6582: add clock-names property to uart nodesCristian Cozzolino
Other SoC DTSI files define this property for their uart nodes. Do the same here too, to be consistent. Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13ARM: dts: mediatek: mt6582: add mt6582 compatible to timerCristian Cozzolino
Bindings already have mt6582 compatible for timer, so add that to DTSI. While at it, remove clock-names property (which is not required by timer node) and fix node address. Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13ARM: dts: mediatek: mt6582: remove compatible property from root nodeCristian Cozzolino
SoC's DTSI does not require compatible property. Drop that. Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13ARM: dts: mediatek: mt6582: sort nodes and propertiesCristian Cozzolino
Sort fixed clocks nodes by clock frequency and memory mapped device nodes by reg address. Also, sort properties as shown in dt-bindings examples. Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13ARM: dts: mediatek: mt6582: move MMIO devices under soc nodeCristian Cozzolino
Memory mapped devices are part of soc. So, add such node and move those devices into it. Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13ARM: mediatek: add MT6582 smp bring up codeCristian Cozzolino
Add support for booting secondary CPUs on MT6582. Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13ARM: mediatek: add board_dt_compat entry for the MT6582 SoCCristian Cozzolino
Add a compatible string for the MT6582 SoC. Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13arm64: dts: mediatek: mt7986-bpi-r3: Change fan PWM value for mid speedMikhail Kshevetskiy
Popular cheap PWM fans for this machine, like the ones coming in heatsink+fan combos will not work properly at the currently defined medium speed. Trying different pwm setting using a command echo $value > /sys/devices/platform/pwm-fan/hwmon/hwmon1/pwm1 I found: pwm1 value fan rotation speed cpu temperature notes ----------------------------------------------------------------- 0 maximal 31.5 Celsius too noisy 40 optimal 35.2 Celsius no noise hearable 95 minimal above 95 does not rotate 55.5 Celsius ----------------------------------------------------------------- Thus only cpu-active-high and cpu-active-low modes are usable. I think this is wrong. This patch fixes cpu-active-medium settings for bpi-r3 board. I know, the patch is not ideal as it can break pwm fan for some users. Likely this is the only official mt7986-bpi-r3 heatsink+fan solution available on the market. This patch may not be enough. Users may wants to tweak their thermal_zone0 trip points, thus tuning fan rotation speed depending on cpu temperature. That can be done on the base of the following example: === example ========= # cpu temperature below 25 Celsius degrees, no rotation echo 25000 > /sys/class/thermal/thermal_zone0/trip_point_4_temp # cpu temperature in [25..32] Celsius degrees, normal rotation speed echo 32000 > /sys/class/thermal/thermal_zone0/trip_point_3_temp # cpu temperature above 50 Celsius degrees, max rotation speed echo 50000 > /sys/class/thermal/thermal_zone0/trip_point_2_temp ===================== Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> Acked-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13arm64: dts: mediatek: mt8370-grinn-genio-510-sbc: Add Grinn GenioSBC-510Bartosz Bilas
Add support for Grinn GenioSBC-510. Based on the commit introducing support for the Grinn GenioSBC-700, this change adds support for the Grinn GenioSBC-510, a single-board computer based on the MediaTek Genio 510 SoC. More details about the hardware: - https://grinn-global.com/products/grinn-geniosom-510 - https://grinn-global.com/products/grinn-genioboard-edge-ai-sbc Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13arm64: dts: mediatek: mt8390-genio-700-evk: Add Grinn GenioSBC-700Mateusz Koza
Add support for Grinn GenioSBC-700. The Grinn GenioSBC-700 is a single-board computer based on the MediaTek Genio 700 SoC. Its device tree is split into separate SoM (.dtsi) and SBC (.dtsi) files, which are combined in the SoC-specific .dts file. More details about the hardware: - https://grinn-global.com/products/grinn-geniosom-700 - https://grinn-global.com/products/grinn-genioboard-edge-ai-sbc Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mateusz Koza <mateusz.koza@grinn-global.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13arm64: dts: renesas: eagle-function-expansion: Add eMMC supportWolfram Sang
Add pinmuxing and configuration of the MMC-capable SDHI instance to make use of the eMMC. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20250923161709.3110-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-10-13arm64: defconfig: Enable UFS support for MediaTek Genio 1200 EVK UFS boardMacpaul Lin
Enable the UFS related settings to support Genio 1200 EVK UFS board. This board uses UFS as the boot device and also the main storage. This includes support for: - CONFIG_SCSI_UFS_MEDIATEK Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13firmware: arm_ffa: Add support for IMPDEF value in the memory access descriptorSudeep Holla
FF-A v1.2 introduced 16 byte IMPLEMENTATION DEFINED value in the endpoint memory access descriptor to allow any sender could to specify an its any custom value for each receiver. Also this value must be specified by the receiver when retrieving the memory region. The sender must ensure it informs the receiver of this value via an IMPLEMENTATION DEFINED mechanism such as a partition message. So the FF-A driver can use the message interfaces to communicate the value and set the same in the ffa_mem_region_attributes structures when using the memory interfaces. The driver ensure that the size of the endpoint memory access descriptors is set correctly based on the FF-A version. Fixes: 9fac08d9d985 ("firmware: arm_ffa: Upgrade FF-A version to v1.2 in the driver") Reported-by: Lixiang Mao <liximao@qti.qualcomm.com> Tested-by: Lixiang Mao <liximao@qti.qualcomm.com> Message-Id: <20250923150927.1218364-1-sudeep.holla@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2025-10-13arm64: dts: mediatek: mt7988a: add 'soc-uuid' cell to efuseDaniel Golle
The efuse of the MediaTek MT7988 contains a 16-byte unique identifier. Add a 'soc-uuid' cell covering those 16 bytes to the nvmem defininition of the efuse to allow easy access from userspace, eg. to generate a persistent random MAC address on boards like the BananaPi R4 which doesn't have any factory-assigned addresses. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13arm64: dts: mediatek: mt7981b: add 'soc-uuid' cell to efuseDaniel Golle
The efuse of the MediaTek MT7981 contains a 16-byte unique identifier. Add a 'soc-uuid' cell covering those 16 bytes to the nvmem defininition of the efuse to allow easy access from userspace, eg. to generate a persistent random MAC address on boards which don't have any factory-assigned addresses. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13arm64: dts: mediatek: mt7986a: add 'soc-uuid' cell to efuseDaniel Golle
The efuse of the MediaTek MT7986 contains an 8-byte unique identifier. Add a 'soc-uuid' cell covering those 8 bytes to the nvmem defininition of the efuse to allow easy access from userspace, eg. to generate a persistent random MAC address on boards like the BananaPi R3 which doesn't have any factory-assigned addresses. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13arm64: dts: mediatek: mt7622: add 'soc-uuid' cell to efuseDaniel Golle
The efuse of the MediaTek MT7622 contains an 8-byte unique identifier. Add a 'soc-uuid' cell covering those 8 bytes to the nvmem defininition of the efuse to allow easy access from userspace, eg. to generate a persistent random MAC address on boards like the BananaPi R64 which doesn't have any factory-assigned addresses. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13arm64: dts: mediatek: mt7981b: OpenWrt One: set console UART to 115200Bryan Hinton
Use the new uart0 label for the console and make the speed explicit by setting stdout-path = "serial0:115200n8" under /chosen. This keeps the DTS OS-agnostic: no bootargs or distribution-specific properties are added. Drop the 'current-speed' property from uart0 as it is not allowed by the mediatek UART binding. The baud is already provided via stdout-path. Verification: Boot-tested with mainline Image+DTB via U-Boot on OpenWrt One (MT7981B). Serial console active at 115200, DTB decompile confirms serial0 alias and stdout-path set correctly. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202509211032.0rJjPoYE-lkp@intel.com/ Signed-off-by: Bryan Hinton <bryan@bryanhinton.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13arm64: dts: mediatek: mt7981b: add labels for UART0/1/2 nodesBryan Hinton
Add stable labels (uart0, uart1, uart2) to the MT7981B SoC UART nodes so board DTS files can reference them directly. This change is purely cosmetic and introduces no functional differences. Verification: Built dtbs and boot-tested mainline Image+DTB via U-Boot on MT7981B hardware; decompiled DT shows the uart0 label present and the serial0 alias (or absolute path) resolves to serial@11002000. Signed-off-by: Bryan Hinton <bryan@bryanhinton.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13arm64: dts: mediatek: add device-tree for Genio 1200 EVK UFS boardMacpaul Lin
Add a basic device-tree (mt8395-genio-1200-evk-ufs.dts) in order to be able to use UFS storage as the main storage on Genio 1200 EVK board. This board is the origin Genio 1200 EVK already mounted two main storages, one is eMMC, and the other is UFS. The system automatically prioritizes between eMMC and UFS via BROM detection, so user could not use both storage types simultaneously. As a result, mt8395-evk-ufs must be treated as a separate board. It use mt8395-genio-common.dtsi file to use common definitions. Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-10-13arm64: dts: mediatek: mt8395-genio-1200-evk: Move common parts to dtsiMacpaul Lin
In preparation for introducing the Genio 1200 EVK UFS board support, split mt8395-genio-1200-evk.dts file in two to create mt8395-genio-common.dtsi file, containing common definitions for both boards. Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
generated by cgit v1.3 (git 2.53.0) at 2026-11-12 04:47:58 +0000