| Age | Commit message (Collapse) | Author |
|---|
|
With async crypto, we rely on tx_work to actually transmit records
once encryption completes. But while send() is running, both the
tx_lock and socket lock are held, so tx_work_handler cannot process
the queue of encrypted records, and simply reschedules itself. During
a large send(), this could last a long time, and use a lot of memory.
Transmit any pending encrypted records before restarting the main
loop of tls_sw_sendmsg_locked.
Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/8396631478f70454b44afb98352237d33f48d34d.1760432043.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Async decryption calls tls_strp_msg_hold to create a clone of the
input skb to hold references to the memory it uses. If we fail to
allocate that clone, proceeding with async decryption can lead to
various issues (UAF on the skb, writing into userspace memory after
the recv() call has returned).
In this case, wait for all pending decryption requests.
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/b9fe61dcc07dab15da9b35cf4c7d86382a98caf2.1760432043.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When userspace wants to send a non-DATA record (via the
TLS_SET_RECORD_TYPE cmsg), we need to send any pending data from a
previous MSG_MORE send() as a separate DATA record. If that DATA record
is encrypted asynchronously, tls_handle_open_record will return
-EINPROGRESS. This is currently treated as an error by
tls_process_cmsg, and it will skip setting record_type to the correct
value, but the caller (tls_sw_sendmsg_locked) handles that return
value correctly and proceeds with sending the new message with an
incorrect record_type (DATA instead of whatever was requested in the
cmsg).
Always set record_type before handling the open record. If
tls_handle_open_record returns an error, record_type will be
ignored. If it succeeds, whether with synchronous crypto (returning 0)
or asynchronous (returning -EINPROGRESS), the caller will proceed
correctly.
Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/0457252e578a10a94e40c72ba6288b3a64f31662.1760432043.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If we hit an error during the main loop of tls_sw_sendmsg_locked (eg
failed allocation), we jump to send_end and immediately
return. Previous iterations may have queued async encryption requests
that are still pending. We should wait for those before returning, as
we could otherwise be reading from memory that userspace believes
we're not using anymore, which would be a sort of use-after-free.
This is similar to what tls_sw_recvmsg already does: failures during
the main loop jump to the "wait for async" code, not straight to the
unlock/return.
Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/c793efe9673b87f808d84fdefc0f732217030c52.1760432043.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During tls_sw_sendmsg_locked, we pre-allocate the encrypted message
for the size we're expecting to send during the current iteration, but
we may end up sending less, for example when splicing: if we're
getting the data from small fragments of memory, we may fill up all
the slots in the skmsg with less data than expected.
In this case, we need to trim the encrypted message to only the length
we actually need, to avoid pushing uninitialized bytes down the
underlying TCP socket.
Fixes: fe1e81d4f73b ("tls/sw: Support MSG_SPLICE_PAGES")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/66a0ae99c9efc15f88e9e56c1f58f902f442ce86.1760432043.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk->sk_refcnt has been converted to refcount_t in 2017.
__sock_put(sk) being refcount_dec(&sk->sk_refcnt), it will complain
loudly if the current refcnt is 1 (or less) in a non racy way.
We can remove four WARN_ON() in favor of the generic refcount_dec()
check.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Xuanqiang Luo<luoxuanqiang@kylinos.cn>
Link: https://patch.msgid.link/20251014140605.2982703-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some execution paths that jump to the fiber_setup_done label
could leave the remote_adv and local_adv variables uninitialized
and then use it.
Initialize this variables at the point of definition to avoid this.
Fixes: 85730a631f0c ("tg3: Add SGMII phy support for 5719/5718 serdes")
Co-developed-by: Alexandr Sapozhnikov <alsp705@gmail.com>
Signed-off-by: Alexandr Sapozhnikov <alsp705@gmail.com>
Signed-off-by: Alexey Simakov <bigalex934@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20251014164736.5890-1-bigalex934@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a maintainer entry for IPv6 IOAM. Add myself as I authored most
if not all of the IPv6 IOAM code in the kernel and actively participate
in the related IETF groups.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20251014170650.27679-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the TX and RX MCS rate configurations per peer are
reversed when sent to the firmware. As a result, RX MCS rates
are configured for TX, and vice versa. This commit rectifies
the configuration to match what the firmware expects.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009211656.2386085-3-quic_pradeepc@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
While associating, firmware needs the peer's receive capability
to calculate its own VHT transmit MCS. Currently, the host
sends this information via mcs->rx_mcs_set field, but firmware
actually reads it from mcs->tx_mcs_set field. This mismatch is
incorrect.
This issue has not caused failures so far because most peers
advertise identical TX and RX capabilities. Fix this by
assigning the value to tx_mcs_set as expected.
Additionally, the rate control mask is intended to limit our
transmit MCS, so it should also apply to the peer's receive
capability. Update the logic accordingly.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009211656.2386085-2-quic_pradeepc@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, in ext_rx_stats, the NSS value is taken directly from
the firmware, which results in incorrect mapping:
4x4, 3x3, 2x2, 1x1 SS are incorrectly updated as 3x3, 2x2,
1x1, 0x0 SS respectively.
Fix the issue by incrementing the NSS value by 1 while updating
the PPDU info to ensure accurate spatial stream statistics.
Remove the redundant +1 increment in the radiotap header when monitor
mode is enabled to prevent double counting.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Thiraviyam Mariyappan <thiraviyam.mariyappan@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251007133332.1092178-1-thiraviyam.mariyappan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Mac80211 schedules CSA finalize work twice during a channel switch: first
during the reserved switch phase and again during the finalize phase.
The beacon content is updated only during the second schedule, which occurs
after the reserved switch completes. However, the ath12k driver attempts to
bring up the VDEV during the channel switch callback
(ath12k_mac_update_vif_chan()), which leads to premature installation of
stale beacon templates before the updated content is available.
This premature VDEV bring-up causes outdated beacon information to be
broadcast, which can result in updated channel parameters during the
transition. In MBSSID scenarios, this behavior is particularly problematic
because the transmitting interface's beacon must be updated before
non-transmitting interfaces are brought up. Failing to do so can lead to
beacon mismatches across interfaces.
Introduce a is_csa_in_progress flag to defer VDEV_UP until CSA finalize is
complete. Set this flag during the channel switch callback when CSA is
active. In bss_info_changed(), check this flag and issue VDEV_UP only
after the beacon template has been updated.
Ensure that in MBSSID cases, the transmitting interface is brought up
first, followed by all non-transmitting interfaces. This ordering makes
sure correct beacon propagation and avoids stale beacon installation
during CSA transitions.
Additionally, move the call to ath12k_mac_update_peer_puncturing_width()
before VDEV bring-up during CSA handling. This ensures that the puncturing
bitmap and bandwidth settings are applied before the VDEV is brought up.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Fixes: 8c6faa56bfb2 ("wifi: ath12k: add MBSSID beacon support")
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250924134336.888-1-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add a counter "reo_excep_msdu_buf_type" in
ath12k_debugfs_dump_device_dp_stats() to account for packets dropped
due to unexpected MSDU buffer types in the RX error path. These
packets are discarded to prevent incorrect parsing and potential
kernel crashes. This helps in debugging and monitoring RX error
handling behavior.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sarika Sharma <sarika.sharma@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250930091551.3305312-3-sarika.sharma@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, packets received on the REO exception ring from
unassociated peers are of MSDU buffer type, while the driver expects
link descriptor type packets. These packets are not parsed further due
to a return check on packet type in ath12k_hal_desc_reo_parse_err(),
but the associated skb is not freed. This may lead to kernel
crashes and buffer leaks.
Hence to fix, update the RX error handler to explicitly drop
MSDU buffer type packets received on the REO exception ring.
This prevents further processing of invalid packets and ensures
stability in the RX error handling path.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Sarika Sharma <sarika.sharma@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250930091551.3305312-2-sarika.sharma@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Hardware target implements an address space larger than that PCI BAR can
map. In order to be able to access the whole target address space, the BAR
space is split into 4 segments, of which the last 3, called windows, can
be dynamically mapped to the desired area. This is achieved by updating
window register with appropriate window value. Currently each time when
accessing a register that beyond ATH11K_PCI_WINDOW_START, host calculates
the window value and caches it after window update, this way next time
when accessing a register falling in the same window, host knows that the
window is already good hence no additional update needed.
However this mechanism breaks after global reset is triggered in
ath11k_pci_soc_global_reset(), because with global reset hardware resets
window register hence the window is not properly mapped any more. Current
host does nothing about this, as a result a subsequent register access may
not work as expected if it falls in a window same as before.
Although there is no obvious issue seen now, better to fix it to avoid
future problem. The fix is done by restoring the window register after
global reset.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251014-ath11k-reset-window-cache-v1-1-b85271b111dd@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
struct wmi_bcn_send_from_host_cmd is unused, so remove it.
Compile tested only.
Link: https://patch.msgid.link/20251010-ath12k-nuke-wmi_bcn_send_from_host_cmd-v1-1-6f1172b77848@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
struct wmi_bcn_send_from_host_cmd is unused, so remove it.
Compile tested only.
Link: https://patch.msgid.link/20251010-ath11k-nuke-wmi_bcn_send_from_host_cmd-v1-1-bfb5118d9018@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, ath10k has a recovery check logic. It will wait for the
last recovery to finish by wait_for_completion_timeout();
But in SDIO scenarios, the recovery function may be invoked from
interrupt context, where long blocking waits are undesirable and can
lead to system instability.
Additionally, Linux’s ordered workqueue processes one task at a time.
If a previous recovery is still queued or executing, new triggers are
ignored. This prevents accurate tracking of consecutive failures and
delays transition to the WEDGED state.
To address this, move the recovery check logic into a different
workqueue.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189
Fixes: c256a94d1b1b ("wifi: ath10k: shutdown driver when hardware is unreliable")
Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251014110757.155-1-kang.yang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
wcn36xx_smd_update_scan_params() last use was removed in 2020 by
commit 5973a2947430 ("wcn36xx: Fix software-driven scan")
Remove it.
This leaves the wcn36xx_hal_update_scan_params_req_ex and
wcn36xx_hal_update_scan_params_resp structs unused.
Remove them, together with the unused
wcn36xx_hal_update_scan_params_req.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20251011001038.352393-1-linux@treblig.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When the kernel leaves to userspace via syscall_restore_rfi(), the
W bit is not set in the new PSW. This doesn't cause any problems
because there's no 64 bit userspace for parisc. Simple static binaries
are usually loaded at addresses way below the 32 bit limit so the W bit
doesn't matter.
Fix this by setting the W bit when TIF_32BIT is not set.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Currently, the BiosImage type in vbios code is implemented as a
type-wrapping enum with the sole purpose of implementing a type that is
common to all specific image types. To make this work, macros were used
to overcome limitations of using enums. Ugly match statements were also
required to route methods from the enum type to the specific image type.
Simplify the code by just creating the common BiosImage type in the
iterator, and then converting it to specific image type after. This
works well since all the methods common to different BiosImage are
called only during the iteration and not later. Should we need to call
these common methods later, we can use AsRef and traits, but for now not
doing so gives us a nice ~50 negative line delta versus the existing
code and is a lot simpler.
Also remove the now obsolete BiosImage enum type.
Cc: Benno Lossin <lossin@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251009004732.2287050-1-joelagnelf@nvidia.com>
|
|
Don't use unwrap() to extract an Option<SGEntry>, instead handle the
error condition gracefully.
Fixes: a841614e607c ("gpu: nova-core: firmware: process and prepare the GSP firmware")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20250926130623.61316-2-dakr@kernel.org>
|
|
Because nova-core depends on CONFIG_64BIT and a raw DmaAddress is
always a u64, we can remove the now actually useless conversion.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
[acourbot@nvidia.com: reword commit as suggested by John.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20250926130623.61316-1-dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Handle inode number mismatches in nsfs file handles
- Update the comment to init_file()
- Add documentation link for EBADF in the rust file code
- Skip read lock assertion for read-only filesystems when using dax
- Don't leak disconnected dentries during umount
- Fix new coredump input pattern validation
- Handle ENOIOCTLCMD conversion in vfs_fileattr_{g,s}et() correctly
- Remove redundant IOCB_DIO_CALLER_COMP clearing in overlayfs
* tag 'vfs-6.18-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ovl: remove redundant IOCB_DIO_CALLER_COMP clearing
fs: return EOPNOTSUPP from file_setattr/file_getattr syscalls
Revert "fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP"
coredump: fix core_pattern input validation
vfs: Don't leak disconnected dentries on umount
dax: skip read lock assertion for read-only filesystems
rust: file: add intra-doc link for 'EBADF'
fs: update comment in init_file()
nsfs: handle inode number mismatches gracefully in file handles
|
|
Initialize input regulator and gpios to proper values to have things
basically working as well as in the case when these things are
hardwired.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Andreas Kemnade <akemnade@kernel.org>
Link: https://patch.msgid.link/20250917-sy7636-rsrc-v3-2-331237d507a2@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enable support for the CEC interface of the Synopsys DesignWare HDMI QP
IP block.
This is used by all boards based on RK3588 & RK3576 SoCs.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
In order to support correct initialization of the timer base in the HDMI
QP IP block, setup platform data to include the required reference clock
rate.
While at it, ensure plat_data is zero-initialized in
dw_hdmi_qp_rockchip_bind().
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-5-fa25163c4b08@collabora.com
|
|
In order to support the CEC interface of the DesignWare HDMI QP IP
block, setup platform data to include the required IRQ number.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-4-fa25163c4b08@collabora.com
|
|
The error handling in dw_hdmi_qp_rockchip_bind() is quite inconsistent,
i.e. in some cases the error code is not included in the message, while
in some other cases there is no check for -EPROBE_DEFER.
Since this is part of the probe path, address the aforementioned issues
by switching to dev_err_probe(), which also reduces the code a bit.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-3-fa25163c4b08@collabora.com
|
|
Currently the TIMER_BASE_CONFIG0 register gets initialized to a fixed
value as initially found in vendor driver code supporting the RK3588
SoC. As a matter of fact the value matches the rate of the HDMI TX
reference clock, which is roughly 428.57 MHz.
However, on RK3576 SoC that rate is slightly lower, i.e. 396.00 MHz, and
the incorrect register configuration breaks CEC functionality.
Set the timer base according to the actual reference clock rate that
shall be provided by the platform driver. Otherwise fallback to the
vendor default.
While at it, also drop the unnecessary empty lines in
dw_hdmi_qp_init_hw().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-2-fa25163c4b08@collabora.com
|
|
Add support for the CEC interface of the Synopsys DesignWare HDMI QP TX
controller.
This is based on the downstream implementation, but rewritten on top of
the CEC helpers added recently to the DRM HDMI connector framework.
Also note struct dw_hdmi_qp_plat_data has been extended to include the
CEC IRQ number to be provided by the platform driver.
Co-developed-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Co-developed-by: Derek Foreman <derek.foreman@collabora.com>
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-1-fa25163c4b08@collabora.com
|
|
When performing memory error injection on a THP (Transparent Huge Page)
mapped to userspace on an x86 server, the kernel panics with the following
trace. The expected behavior is to terminate the affected process instead
of panicking the kernel, as the x86 Machine Check code can recover from an
in-userspace #MC.
mce: [Hardware Error]: CPU 0: Machine Check Exception: f Bank 3: bd80000000070134
mce: [Hardware Error]: RIP 10:<ffffffff8372f8bc> {memchr_inv+0x4c/0xf0}
mce: [Hardware Error]: TSC afff7bbff88a ADDR 1d301b000 MISC 80 PPIN 1e741e77539027db
mce: [Hardware Error]: PROCESSOR 0:d06d0 TIME 1758093249 SOCKET 0 APIC 0 microcode 80000320
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The root cause of this panic is that handling a memory failure triggered
by an in-userspace #MC necessitates splitting the THP. The splitting
process employs a mechanism, implemented in
try_to_map_unused_to_zeropage(), which reads the pages in the THP to
identify zero-filled pages. However, reading the pages in the THP results
in a second in-kernel #MC, occurring before the initial memory_failure()
completes, ultimately leading to a kernel panic. See the kernel panic
call trace on the two #MCs.
First Machine Check occurs // [1]
memory_failure() // [2]
try_to_split_thp_page()
split_huge_page()
split_huge_page_to_list_to_order()
__folio_split() // [3]
remap_page()
remove_migration_ptes()
remove_migration_pte()
try_to_map_unused_to_zeropage() // [4]
memchr_inv() // [5]
Second Machine Check occurs // [6]
Kernel panic
[1] Triggered by accessing a hardware-poisoned THP in userspace, which is
typically recoverable by terminating the affected process.
[2] Call folio_set_has_hwpoisoned() before try_to_split_thp_page().
[3] Pass the RMP_USE_SHARED_ZEROPAGE remap flag to remap_page().
[4] Try to map the unused THP to zeropage.
[5] Re-access pages in the hw-poisoned THP in the kernel.
[6] Triggered in-kernel, leading to a panic kernel.
In Step[2], memory_failure() sets the poisoned flag on the page in the THP
by TestSetPageHWPoison() before calling try_to_split_thp_page().
As suggested by David Hildenbrand, fix this panic by not accessing to the
poisoned page in the THP during zeropage identification, while continuing
to scan unaffected pages in the THP for possible zeropage mapping. This
prevents a second in-kernel #MC that would cause kernel panic in Step[4].
Thanks to Andrew Zaborowski for his initial work on fixing this issue.
Link: https://lkml.kernel.org/r/20251015064926.1887643-1-qiuxu.zhuo@intel.com
Link: https://lkml.kernel.org/r/20251011075520.320862-1-qiuxu.zhuo@intel.com
Fixes: b1f202060afe ("mm: remap unused subpages to shared zeropage when splitting isolated thp")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reported-by: Farrah Chen <farrah.chen@intel.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Acked-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The extent map cache can become stale when extents are moved or
defragmented, causing subsequent operations to see outdated extent flags.
This triggers a BUG_ON in ocfs2_refcount_cal_cow_clusters().
The problem occurs when:
1. copy_file_range() creates a reflinked extent with OCFS2_EXT_REFCOUNTED
2. ioctl(FITRIM) triggers ocfs2_move_extents()
3. __ocfs2_move_extents_range() reads and caches the extent (flags=0x2)
4. ocfs2_move_extent()/ocfs2_defrag_extent() calls __ocfs2_move_extent()
which clears OCFS2_EXT_REFCOUNTED flag on disk (flags=0x0)
5. The extent map cache is not invalidated after the move
6. Later write() operations read stale cached flags (0x2) but disk has
updated flags (0x0), causing a mismatch
7. BUG_ON(!(rec->e_flags & OCFS2_EXT_REFCOUNTED)) triggers
Fix by clearing the extent map cache after each extent move/defrag
operation in __ocfs2_move_extents_range(). This ensures subsequent
operations read fresh extent data from disk.
Link: https://lore.kernel.org/all/20251009142917.517229-1-kartikey406@gmail.com/T/
Link: https://lkml.kernel.org/r/20251009154903.522339-1-kartikey406@gmail.com
Fixes: 53069d4e7695 ("Ocfs2/move_extents: move/defrag extents within a certain range.")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reported-by: syzbot+6fdd8fa3380730a4b22c@syzkaller.appspotmail.com
Tested-by: syzbot+6fdd8fa3380730a4b22c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=2959889e1f6e216585ce522f7e8bc002b46ad9e7
Reviewed-by: Mark Fasheh <mark@fasheh.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
syzbot was able to find the following path:
add_stack_record_to_list mm/page_owner.c:182 [inline]
inc_stack_record_count mm/page_owner.c:214 [inline]
__set_page_owner+0x2c3/0x4a0 mm/page_owner.c:333
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x240/0x2a0 mm/page_alloc.c:1851
prep_new_page mm/page_alloc.c:1859 [inline]
get_page_from_freelist+0x21e4/0x22c0 mm/page_alloc.c:3858
alloc_pages_nolock_noprof+0x94/0x120 mm/page_alloc.c:7554
Don't spin in add_stack_record_to_list() when it is called
from *_nolock() context.
Link: https://lkml.kernel.org/r/CAADnVQK_8bNYEA7TJYgwTYR57=TTFagsvRxp62pFzS_z129eTg@mail.gmail.com
Fixes: 97769a53f117 ("mm, bpf: Introduce try_alloc_pages() for opportunistic page allocation")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reported-by: syzbot+8259e1d0e3ae8ed0c490@syzkaller.appspotmail.com
Reported-by: syzbot+665739f456b28f32b23d@syzkaller.appspotmail.com
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 370645f41e6e ("dma-mapping: force bouncing if the kmalloc() size is
not cache-line-aligned") introduced DMA_BOUNCE_UNALIGNED_KMALLOC feature
and permitted architecture specific code configure kmalloc slabs with
sizes smaller than the value of dma_get_cache_alignment().
When that feature is enabled, the physical address of some small
kmalloc()-ed buffers might be not aligned to the CPU cachelines, thus not
really suitable for typical DMA. To properly handle that case a SWIOTLB
buffer bouncing is used, so no CPU cache corruption occurs. When that
happens, there is no point reporting a false-positive DMA-API warning that
the buffer is not properly aligned, as this is not a client driver fault.
[m.szyprowski@samsung.com: replace is_swiotlb_allocated() with is_swiotlb_active(), per Catalin]
Link: https://lkml.kernel.org/r/20251010173009.3916215-1-m.szyprowski@samsung.com
Link: https://lkml.kernel.org/r/20251009141508.2342138-1-m.szyprowski@samsung.com
Fixes: 370645f41e6e ("dma-mapping: force bouncing if the kmalloc() size is not cache-line-aligned")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Inki Dae <m.szyprowski@samsung.com>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: "Isaac J. Manjarres" <isaacmanjarres@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The damon_ctx for testing online DAMON parameters commit inputs is
deallocated only when the test fails. This means memory is leaked for
every successful online DAMON parameters commit. Fix the leak by always
deallocating it.
Link: https://lkml.kernel.org/r/20251003201455.41448-3-sj@kernel.org
Fixes: 4c9ea539ad59 ("mm/damon/sysfs: validate user inputs from damon_sysfs_commit_input()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon/sysfs: fix commit test damon_ctx [de]allocation".
DAMON sysfs interface dynamically allocates and uses a damon_ctx object
for testing if given inputs for online DAMON parameters update is valid.
The object is being used without an allocation failure check, and leaked
when the test succeeds. Fix the two bugs.
This patch (of 2):
The damon_ctx for testing online DAMON parameters commit inputs is used
without its allocation failure check. This could result in an invalid
memory access. Fix it by directly returning an error when the allocation
failed.
Link: https://lkml.kernel.org/r/20251003201455.41448-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20251003201455.41448-2-sj@kernel.org
Fixes: 4c9ea539ad59 ("mm/damon/sysfs: validate user inputs from damon_sysfs_commit_input()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The blocker tracking mechanism assumes that lock pointers are at least
4-byte aligned to use their lower bits for type encoding.
However, as reported by Eero Tamminen, some architectures like m68k
only guarantee 2-byte alignment of 32-bit values. This breaks the
assumption and causes two related WARN_ON_ONCE checks to trigger.
To fix this, the runtime checks are adjusted to silently ignore any lock
that is not 4-byte aligned, effectively disabling the feature in such
cases and avoiding the related warnings.
Thanks to Geert Uytterhoeven for bisecting!
Link: https://lkml.kernel.org/r/20250909145243.17119-1-lance.yang@linux.dev
Fixes: e711faaafbe5 ("hung_task: replace blocker_mutex with encoded blocker")
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Reported-by: Eero Tamminen <oak@helsinkinet.fi>
Closes: https://lore.kernel.org/lkml/CAMuHMdW7Ab13DdGs2acMQcix5ObJK0O2dG_Fxzr8_g58Rc1_0g@mail.gmail.com
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Finn Thain <fthain@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Mingzhe Yang <mingzhe.yang@ly.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yongliang Gao <leonylgao@tencent.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Both the read and write side use kiocb_done() to finish a request, and
kiocb_done() will call io_put_kbuf() in case a provided buffer was used
for the request. Provided buffers are not supported for writes, hence
NULL is being passed in. This normally works fine, as io_put_kbuf()
won't actually use the value unless REQ_F_BUFFER_RING or
REQ_F_BUFFER_SELECTED is set in the request flags. But depending on
compiler (or whether or not CONFIG_CC_OPTIMIZE_FOR_SIZE is set), that
may be done even though the value is never used. This will then cause a
NULL pointer dereference.
Make it a bit more obvious and check for a NULL io_br_sel, and don't
even bother calling io_put_kbuf() for that case.
Fixes: 5fda51255439 ("io_uring/kbuf: switch to storing struct io_buffer_list locally")
Reported-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The S5_RESET_STATUS register is parsed on boot and printed to kmsg.
However, this could sometimes be misleading and lead to users wasting a
lot of time on meaningless debugging for two reasons:
* Some bits are never cleared by hardware. It's the software's
responsibility to clear them as per the Processor Programming Reference
(see [1]).
* Some rare hardware-initiated platform resets do not update the
register at all.
In both cases, a previous reboot could leave its trace in the register,
resulting in users seeing unrelated reboot reasons while debugging random
reboots afterward.
Write the read value back to the register in order to clear all reason bits
since they are write-1-to-clear while the others must be preserved.
[1]: https://bugzilla.kernel.org/show_bug.cgi?id=206537#attach_303991
[ bp: Massage commit message. ]
Fixes: ab8131028710 ("x86/CPU/AMD: Print the reason for the last reset")
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/all/20250913144245.23237-1-i@rong.moe/
|
|
Add support for PMH0101/PMCX0102/PMH0110/PMH0104 PMIC voltage
regulators which are present on Glymur boards.
Introduce new LDOs & SMPSs under them (PMIC5 subtype 530 for
both).
For these new LDOs support a new optimum power mode(OPM). In
this mode LDO will automatically switch between high power mode
(HPM) and low power mode (LPM) based on the real-time LDO load
current. Its operation is analogous to SMPS AUTO mode.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Co-developed-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Link: https://patch.msgid.link/20250918-glymur-rpmh-regulator-driver-v3-4-184c09678be3@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently rpmh-regulator resource name inside CMD-DB follows this
format: `^(ldo|smp|bob|vs)[a-n][1-9][0-9]?$`
(eg - ldob11, smpa2, bobc1 etc)
Here `[a-n]` in the resource name signifies the `pmic-id`.
However, newer firmware follows a different format that also
includes the `bus_id` as well in the resource name.
New format:
`^(L|S|B)[1-9][0-9]?[A-N]_E[0-3]$`
(eg - L11B_E1, S2A_E0, B1C_E0 etc)
Here `_E[0-3]` at the end is the `bus_id`, and upper case `[A-N]`
is used to denote `pmic-id`, while the regulator `(ldo|smp|bob)`
is replaced with their initials in upper case `(L|S|B|VA)`.
To handle this properly, do the following:
- Remove the `resource_name` member from vreg init data
- Add `index` and `regulator_hw_type` new members, which will
contain the index number and the regulator hardware type
(SMPS/LDO/BOB/VS) which can be combined with the pmic-id read
from the devicetree to generate the resource_name.
- Choose new resource name format if `pmic-id` contains `_E`
in it, else fallback to old format.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Link: https://patch.msgid.link/20250918-glymur-rpmh-regulator-driver-v3-3-184c09678be3@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
CMD-DB
Currently, CMD-DB names for RPMH regulators follow this format:
`^(smps|ldo|bob|vs)[a-n][1-9][0-9]?$`
Here, the `[a-n]` value is read from the `pmic-id` DT property,
which is unique to each PMIC present on the board.
Note that in this older CMD-DB name format the SPMI bus on which
a particular PMIC regulator exists was not apparent from its
CMD-DB name.
New targets like Glymur, where we have multiple SPMI buses,
overcome this limitation by following a new CMD-DB name format:
`^(L|S|B)[1-9][0-9]?[A-N]_E[0-3]$`
Here `[A-N]_E[0-3]` part will now be read from the `pmic-id` DT
prop and it includes the SPMI bus id `[0-3]` as well.
However, the PMIC ID part `[A-N]` of the CMD-DB name is now
unique only to the SPMI bus that the PMIC regulator is present
on. which means `L1B_E0` and `L1B_E1` are both possible CMD-DB
names for two different regulator LDOs present on two different
SPMI buses (bus id 0 and 1) on the same board.
Note that since the new `pmic-id` DT property is a combo of
PMIC ID and SPMI bus ID, so its still unique to each PMIC
present on the board.
Update the `pmic-id` property pattern information to reflect this
change in the driver handling to support this new CMD-DB naming
format while maintaining backward compatiblilty with old CMD-DB
naming format which is still supported for older/existing
targets.
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Link: https://patch.msgid.link/20250918-glymur-rpmh-regulator-driver-v3-2-184c09678be3@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add rpmh-regulator driver compatibles strings for below PMICs:
- PMH0101
- PMH0104
- PMH0110
- PMCX0102
Also add the supply name properties for the regulators
present on these PMICs.
Co-developed-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Link: https://patch.msgid.link/20250918-glymur-rpmh-regulator-driver-v3-1-184c09678be3@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DAC2 L/R source selection fields (MX-1B [6:4] and [2:0]) contain non
contiguous values due to reserved bits documented in datasheet (page 66):
<https://www.elinfor.com/pdf/RealtekMicroelectronics/ALC5670-VB-
RealtekMicroelectronics.pdf>
Switch from SOC_ENUM_SINGLE_DECL to SOC_VALUE_ENUM_SINGLE_DECL
to handle discrete values.
Signed-off-by: Alex Tran <alex.t.tran@gmail.com>
Link: https://patch.msgid.link/20250929004625.1310721-1-alex.t.tran@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
devm_kasprintf() may return NULL on memory allocation failure,
but the debug message prints cpus->dai_name before checking it.
Move the dev_dbg() call after the NULL check to prevent potential
NULL pointer dereference.
Fixes: cb8ea62e64020 ("ASoC: amd/sdw_utils: add sof based soundwire generic machine driver")
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Link: https://patch.msgid.link/20251015075530.146851-1-liqiang01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The widgets DMIC3_ENA and DMIC4_ENA must be defined in the DAPM
suppy widget, just like DMICL_ENA and DMICR_ENA. Whenever they
are turned on or off, the required startup or shutdown sequences
must be taken care by the max98090_shdn_event.
Signed-off-by: Sharique Mohammad <sharq0406@gmail.com>
Link: https://patch.msgid.link/20251015134215.750001-1-sharq0406@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add compatible string fsl,imx-audio-tlv320 to fix below CHECK_DTBS warning:
arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dtb: /sound: failed to match any schema with compatible: ['fsl,imx-audio-tlv320']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251010160321.2130093-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Haibo Chen <haibo.chen@nxp.com>:
PATCH 1: different operations maybe require different max frequency, so
add flexspi to handle such case, re-config the clock rate when
new coming operation require new clock frequency.
Patch 2: add workaround for erratum ERR050272. Since only add 4us dealy
in nxp_fspi_dll_calibration(), so do not distinguish different
platforms.
Patch 3: add max frequency limitation for different sample clock source
selection. Datasheet give max 66MHz for mode 0 and 166MHz for
mode 3. And IC suggest to add this limitation on all SoCs for
safety and stability.
|
|
The SCMI specification states that SENSOR_CONFIG_SET is used to
enable/disable the sensors. The sensors can be disabled by default,
which is the case at least on NXP i.MX95. Explicitly trigger the
SENSOR_CONFIG_SET to enable the sensors, otherwise sensor read may
fail and won't return valid data.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://lore.kernel.org/r/20251015114953.148706-1-marek.vasut@mailbox.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
