| Age | Commit message (Collapse) | Author |
|---|
|
== Background ==
ENCLS[EUPDATESVN] is a new SGX instruction [1] which allows enclave
attestation to include information about updated microcode SVN without a
reboot. Before an EUPDATESVN operation can be successful, all SGX memory
(aka. EPC) must be marked as “unused” in the SGX hardware metadata
(aka.EPCM). This requirement ensures that no compromised enclave can
survive the EUPDATESVN procedure and provides an opportunity to generate
new cryptographic assets.
== Solution ==
Attempt to execute ENCLS[EUPDATESVN] every time the first file descriptor
is obtained via sgx_(vepc_)open(). In the most common case the microcode
SVN is already up-to-date, and the operation succeeds without updating SVN.
Note: while in such cases the underlying crypto assets are regenerated, it
does not affect enclaves' visible keys obtained via EGETKEY instruction.
If it fails with any other error code than SGX_INSUFFICIENT_ENTROPY, this
is considered unexpected and the *open() returns an error. This should not
happen in practice.
On contrary, SGX_INSUFFICIENT_ENTROPY might happen due to a pressure on the
system's DRNG (RDSEED) and therefore the *open() can be safely retried to
allow normal enclave operation.
[1] Runtime Microcode Updates with Intel Software Guard Extensions,
https://cdrdv2.intel.com/v1/dl/getContent/648682
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Nataliia Bondarevska <bondarn@google.com>
|
|
All running enclaves and cryptographic assets (such as internal SGX
encryption keys) are assumed to be compromised whenever an SGX-related
microcode update occurs. To mitigate this assumed compromise the new
supervisor SGX instruction ENCLS[EUPDATESVN] can generate fresh
cryptographic assets.
Before executing EUPDATESVN, all SGX memory must be marked as unused. This
requirement ensures that no potentially compromised enclave survives the
update and allows the system to safely regenerate cryptographic assets.
Add the method to perform ENCLS[EUPDATESVN]. However, until the follow up
patch that wires calling sgx_update_svn() from sgx_inc_usage_count(), this
code is not reachable.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Nataliia Bondarevska <bondarn@google.com>
|
|
Add error codes for ENCLS[EUPDATESVN], then SGX CPUSVN update process can
know the execution state of EUPDATESVN and notify userspace.
EUPDATESVN will be called when no active SGX users is guaranteed. Only add
the error codes that can legally happen. E.g., it could also fail due to
"SGX not ready" when there's SGX users but it wouldn't happen in this
implementation.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Nataliia Bondarevska <bondarn@google.com>
|
|
Add a flag indicating whenever ENCLS[EUPDATESVN] SGX instruction is
supported. This will be used by SGX driver to perform CPU SVN updates.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Nataliia Bondarevska <bondarn@google.com>
|
|
Currently, when SGX is compromised and the microcode update fix is applied,
the machine needs to be rebooted to invalidate old SGX crypto-assets and
make SGX be in an updated safe state. It's not friendly for the cloud.
To avoid having to reboot, a new ENCLS[EUPDATESVN] is introduced to update
SGX environment at runtime. This process needs to be done when there's no
SGX users to make sure no compromised enclaves can survive from the update
and allow the system to regenerate crypto-assets.
For now there's no counter to track the active SGX users of host enclave
and virtual EPC. Introduce such counter mechanism so that the EUPDATESVN
can be done only when there's no SGX users.
Define placeholder functions sgx_inc/dec_usage_count() that are used to
increment and decrement such a counter. Also, wire the call sites for
these functions. Encapsulate the current sgx_(vepc_)open() to
__sgx_(vepc_)open() to make the new sgx_(vepc_)open() easy to read.
The definition of the counter itself and the actual implementation of
sgx_inc/dec_usage_count() functions come next.
Note: The EUPDATESVN, which may fail, will be done in
sgx_inc_usage_count(). Make it return 'int' to make subsequent patches
which implement EUPDATESVN easier to review. For now it always returns
success.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Nataliia Bondarevska <bondarn@google.com>
|
|
When tick values are large, the multiplication by NSEC_PER_SEC is larger
than 64 bits and results in bad conversions.
The issue is seen in PMU busyness counters that look like they have
wrapped around due to bad conversion. i915 PMU implementation returns
monotonically increasing counters. If a count is lesser than previous
one, it will only return the larger value until the smaller value
catches up. The user will see this as zero delta between two
measurements even though the engines are busy.
Fix it by using mul_u64_u32_div()
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14955
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/20251016000350.1152382-2-umesh.nerlige.ramappa@intel.com
|
|
Include the crtc minimum cdclk in the crtc state dump. Might help
figuring out who needed how much cdclk.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-9-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Currently we compute the min_cdclk for each pipe during
intel_cdclk_atomic_check(). But that is too late for the
pipe prefill vs. vblank length checks (done during
intel_compute_global_watermarks).
We can't just reorder these things due to other dependencies,
so instead pull only the per-crtc minimum cdclk calculation
ahead. We should have enough information for that as soon
as we've computed the min cdclk for the planes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-8-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Rename crtc_state->min_cdclk[] into crtc_state->plane_min_cdclk[]
to better reflect what it represents.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-7-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Always account for FBC requirements in intel_crtc_compute_min_cdclk()
so that we don't have to worry about the actual CDCLK frequency in
intel_fbc_check_plane() any longer.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Reorganize the IPS CDCLK handling such that the computed CDCLK
frequency will always satisfy the IPS requirements. The only
exceptional case is if IPS would push the CDCLK above the platform
max, but in that case we can simply disable IPS.
To make this 100% race free we must move the enable_ips modparam
check out from the min CDCLK computation path so that there is no
chance of hsw_min_cdclk() and hsw_ips_compute_config() observing
a different enable_ips value during the same commit.
This allows us to completely remove the cdclk_state stuff
from the IPS code. We only ever have to compare the IPS min
CDCLK against the platform max CDCLK. Thus we eliminate any ordering
requirements between intel_cdclk_atomic_check() and
hsw_ips_compute_config().
Additionally we reduce the three copies of the code doing the
95% calculation into just one.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-5-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
intel_bw_crtc_min_cdclk() (aka. the thing that deals with what bspec
calls "Maximum Pipe Read Bandwidth") doesn't really have anything to
do with the rest of intel_bw.c (which is all about SAGV/QGV and
memory bandwidth). Move it into intel_crtc.c (for the lack of a better
place).
And I don't really want to call intel_bw.c functions from intel_crtc.c,
so move out intel_bw_crtc_data_rate() as well. And when we move that we
pretty much have to move intel_bw_crtc_num_active_planes() as well since
the two are meant to be used as a pair (they both implement the same
"ignore the cursor" logic).
And in an effort to keep the namespaces at least semi-sensible we
flip the intel_bw_crtc_ prefix into intel_crtc_bw_.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-4-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Elimiante the repeated "not not" in the bw code comments.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-3-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Currently intel_bw.c contains basically three completely independent
parts:
- SAGV/memory bandwidth handling
- DBuf bandwidth handling
- "Maximum pipe read bandwidth" calculation, which is some kind
of internal per-pipe bandwidth limit.
Carve out the DBuf bandwdith handling into a separate file since
there is no actual dependency between it and the rest of intel_bw.c.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.18-2025-10-16:
amdgpu:
- Backlight fix
- SI fixes
- CIK fix
- Make CE support debug only
- IP discovery fix
- Ring reset fixes
- GPUVM fault memory barrier fix
- Drop unused structures in amdgpu_drm.h
- JPEG debugfs fix
- VRAM handling fixes for GPUs without VRAM
- GC 12 MES fixes
amdkfd:
- MES fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20251016132224.2534946-1-alexander.deucher@amd.com
|
|
This patch fixes warnings in Documentation/hwmon/lm90.rst reported when
running 'make linkcheckdocs'.
On 2011-09-23 National Semiconductors became part of Texas Instruments
and national.com is no longer accessible. The datasheet resources for
the chips are now available at Texas Instruments website and have been
updated for lm90.
In 2021, Maxim Integrated was acquired by Analog Devices and maxim-ic.com
redirects to analog.com. The chip datasheets are now available at
Analog Devices and have been updated accordingly.
Some additional broken or unavailable links have been replaced with
equivalents hosted by DigiKey.
Signed-off-by: Ankan Biswas <spyjetfayed@gmail.com>
Link: https://lore.kernel.org/r/20251016103049.2573-1-spyjetfayed@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Skip GuC communication warning if reset is in progress (Zhanjun)
- Couple frontbuffer related fixes (Ville)
- Deactivate PSR only on LNL and when selective fetch enabled (Jouni)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aPDoguxlhXlvjNAi@intel.com
|
|
Add support for the ADT7422 high accuracy digital temperature sensor. It's
identical to the other chips supported in the driver so we just need to
add it to the ID tables.
Co-developed-by: Cosmin Tanislav <demonsingur@gmail.com>
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20251015-dev-add-adt7422-v1-3-7cf72d3253ad@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a struct of_device_id match table to the driver.
While at it, make sure to properly include mod_devicetable.h which is
also needed for struct i2c_device_id.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20251015-dev-add-adt7422-v1-2-7cf72d3253ad@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add Analog Devices high accuracy digital temperature sensors to trivial
devices.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251015-dev-add-adt7422-v1-1-7cf72d3253ad@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Pull NVMe fixes from Keith:
"- iostats accounting fixed on multipath retries (Amit)
- secure concatenation response fixup (Martin)
- tls partial record fixup (Wilfred)"
* tag 'nvme-6.18-2025-10-16' of git://git.infradead.org/nvme:
nvme/tcp: handle tls partially sent records in write_space()
nvme-auth: update sc_c in host response
nvme-multipath: Skip nr_active increments in RETRY disposition
|
|
reg_in_range_table is a useful function that is used in multiple places,
and will be needed for WA_BB implementation later.
Let's move this function and i915_range struct to its own file, as we are
trying to move away from i915_utils files.
v2: move functions to their own file
v3: use correct naming convention
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Link:
https://lore.kernel.org/r/20251009215210.41000-1-matthew.s.atwood@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Kuniyuki Iwashima says:
====================
bpf: Allow opt-out from sk->sk_prot->memory_allocated.
This series allows opting out of the global per-protocol memory
accounting if socket is configured as such by sysctl or BPF prog.
This series is the successor of the series below [0], but the changes
now fall in net and bpf subsystems only.
I discussed with Roman Gushchin offlist, and he suggested not mixing
two independent subsystems and it would be cleaner not to depend on
memcg.
So, sk->sk_memcg and memcg code are no longer touched, and instead we
use another hole near sk->sk_prot to store a flag for the pure net
opt-out feature.
Overview of the series:
patch 1 is misc cleanup
patch 2 allows opt-out from sk->sk_prot->memory_allocated
patch 3 introduces net.core.bypass_prot_mem
patch 4 & 5 supports flagging sk->sk_bypass_prot_mem via bpf_setsockopt()
patch 6 is selftest
Thank you very much for all your help, Shakeel, Roman, Martin, and Eric!
[0]: https://lore.kernel.org/bpf/20250920000751.2091731-1-kuniyu@google.com/
Changes:
v2:
* Patch 2:
* Fill kdoc for skc_bypass_prot_mem
* Patch 6
* Fix server fd leak in tcp_create_sockets()
* Avoid close(0) in check_bypass()
v1: https://lore.kernel.org/bpf/20251007001120.2661442-1-kuniyu@google.com/
====================
Link: https://patch.msgid.link/20251014235604.3057003-1-kuniyu@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
pci_msi_create_irq_domain() is now unused. Delete it.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The rp0 frequency is a fused value that is read once during probe
and then cached, so there’s no need to trigger a runtime wake
when accessing rp0.
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Karthik Poosa <karthik.poosa@intel.com>
Link: https://lore.kernel.org/r/20251015094611.1468939-1-badal.nilawar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The test does the following for IPv4/IPv6 x TCP/UDP sockets
with/without sk->sk_bypass_prot_mem, which can be turned on by
net.core.bypass_prot_mem or bpf_setsockopt(SK_BPF_BYPASS_PROT_MEM).
1. Create socket pairs
2. Send NR_PAGES (32) of data (TCP consumes around 35 pages,
and UDP consuems 66 pages due to skb overhead)
3. Read memory_allocated from sk->sk_prot->memory_allocated and
sk->sk_prot->memory_per_cpu_fw_alloc
4. Check if unread data is charged to memory_allocated
If sk->sk_bypass_prot_mem is set, memory_allocated should not be
changed, but we allow a small error (up to 10 pages) in case
other processes on the host use some amounts of TCP/UDP memory.
The amount of allocated pages are buffered to per-cpu variable
{tcp,udp}_memory_per_cpu_fw_alloc up to +/- net.core.mem_pcpu_rsv
before reported to {tcp,udp}_memory_allocated.
At 3., memory_allocated is calculated from the 2 variables at
fentry of socket create function.
We drain the receive queue only for UDP before close() because UDP
recv queue is destroyed after RCU grace period. When I printed
memory_allocated, UDP bypass cases sometimes saw the no-bypass
case's leftover, but it's still in the small error range (<10 pages).
bpf_trace_printk: memory_allocated: 0 <-- TCP no-bypass
bpf_trace_printk: memory_allocated: 35
bpf_trace_printk: memory_allocated: 0 <-- TCP w/ sysctl
bpf_trace_printk: memory_allocated: 0
bpf_trace_printk: memory_allocated: 0 <-- TCP w/ bpf
bpf_trace_printk: memory_allocated: 0
bpf_trace_printk: memory_allocated: 0 <-- UDP no-bypass
bpf_trace_printk: memory_allocated: 66
bpf_trace_printk: memory_allocated: 2 <-- UDP w/ sysctl (2 pages leftover)
bpf_trace_printk: memory_allocated: 2
bpf_trace_printk: memory_allocated: 2 <-- UDP w/ bpf (2 pages leftover)
bpf_trace_printk: memory_allocated: 2
We prefer finishing tests faster than oversleeping for call_rcu()
+ sk_destruct().
The test completes within 2s on QEMU (64 CPUs) w/ KVM.
# time ./test_progs -t sk_bypass
#371/1 sk_bypass_prot_mem/TCP :OK
#371/2 sk_bypass_prot_mem/UDP :OK
#371/3 sk_bypass_prot_mem/TCPv6:OK
#371/4 sk_bypass_prot_mem/UDPv6:OK
#371 sk_bypass_prot_mem:OK
Summary: 1/4 PASSED, 0 SKIPPED, 0 FAILED
real 0m1.481s
user 0m0.181s
sys 0m0.441s
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://patch.msgid.link/20251014235604.3057003-7-kuniyu@google.com
|
|
If a socket has sk->sk_bypass_prot_mem flagged, the socket opts out
of the global protocol memory accounting.
This is easily controlled by net.core.bypass_prot_mem sysctl, but it
lacks flexibility.
Let's support flagging (and clearing) sk->sk_bypass_prot_mem via
bpf_setsockopt() at the BPF_CGROUP_INET_SOCK_CREATE hook.
int val = 1;
bpf_setsockopt(ctx, SOL_SOCKET, SK_BPF_BYPASS_PROT_MEM,
&val, sizeof(val));
As with net.core.bypass_prot_mem, this is inherited to child sockets,
and BPF always takes precedence over sysctl at socket(2) and accept(2).
SK_BPF_BYPASS_PROT_MEM is only supported at BPF_CGROUP_INET_SOCK_CREATE
and not supported on other hooks for some reasons:
1. UDP charges memory under sk->sk_receive_queue.lock instead
of lock_sock()
2. Modifying the flag after skb is charged to sk requires such
adjustment during bpf_setsockopt() and complicates the logic
unnecessarily
We can support other hooks later if a real use case justifies that.
Most changes are inline and hard to trace, but a microbenchmark on
__sk_mem_raise_allocated() during neper/tcp_stream showed that more
samples completed faster with sk->sk_bypass_prot_mem == 1. This will
be more visible under tcp_mem pressure (but it's not a fair comparison).
# bpftrace -e 'kprobe:__sk_mem_raise_allocated { @start[tid] = nsecs; }
kretprobe:__sk_mem_raise_allocated /@start[tid]/
{ @end[tid] = nsecs - @start[tid]; @times = hist(@end[tid]); delete(@start[tid]); }'
# tcp_stream -6 -F 1000 -N -T 256
Without bpf prog:
[128, 256) 3846 | |
[256, 512) 1505326 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[512, 1K) 1371006 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[1K, 2K) 198207 |@@@@@@ |
[2K, 4K) 31199 |@ |
With bpf prog in the next patch:
(must be attached before tcp_stream)
# bpftool prog load sk_bypass_prot_mem.bpf.o /sys/fs/bpf/test type cgroup/sock_create
# bpftool cgroup attach /sys/fs/cgroup/test cgroup_inet_sock_create pinned /sys/fs/bpf/test
[128, 256) 6413 | |
[256, 512) 1868425 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[512, 1K) 1101697 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[1K, 2K) 117031 |@@@@ |
[2K, 4K) 11773 | |
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://patch.msgid.link/20251014235604.3057003-6-kuniyu@google.com
|
|
We will support flagging sk->sk_bypass_prot_mem via bpf_setsockopt()
at the BPF_CGROUP_INET_SOCK_CREATE hook.
BPF_CGROUP_INET_SOCK_CREATE is invoked by __cgroup_bpf_run_filter_sk()
that passes a pointer to struct sock to the bpf prog as void *ctx.
But there are no bpf_func_proto for bpf_setsockopt() that receives
the ctx as a pointer to struct sock.
Also, bpf_getsockopt() will be necessary for a cgroup with multiple
bpf progs running.
Let's add new bpf_setsockopt() and bpf_getsockopt() variants for
BPF_CGROUP_INET_SOCK_CREATE.
Note that inet_create() is not under lock_sock() and has the same
semantics with bpf_lsm_unlocked_sockopt_hooks.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://patch.msgid.link/20251014235604.3057003-5-kuniyu@google.com
|
|
If a socket has sk->sk_bypass_prot_mem flagged, the socket opts out
of the global protocol memory accounting.
Let's control the flag by a new sysctl knob.
The flag is written once during socket(2) and is inherited to child
sockets.
Tested with a script that creates local socket pairs and send()s a
bunch of data without recv()ing.
Setup:
# mkdir /sys/fs/cgroup/test
# echo $$ >> /sys/fs/cgroup/test/cgroup.procs
# sysctl -q net.ipv4.tcp_mem="1000 1000 1000"
# ulimit -n 524288
Without net.core.bypass_prot_mem, charged to tcp_mem & memcg
# python3 pressure.py &
# cat /sys/fs/cgroup/test/memory.stat | grep sock
sock 22642688 <-------------------------------------- charged to memcg
# cat /proc/net/sockstat| grep TCP
TCP: inuse 2006 orphan 0 tw 0 alloc 2008 mem 5376 <-- charged to tcp_mem
# ss -tn | head -n 5
State Recv-Q Send-Q Local Address:Port Peer Address:Port
ESTAB 2000 0 127.0.0.1:34479 127.0.0.1:53188
ESTAB 2000 0 127.0.0.1:34479 127.0.0.1:49972
ESTAB 2000 0 127.0.0.1:34479 127.0.0.1:53868
ESTAB 2000 0 127.0.0.1:34479 127.0.0.1:53554
# nstat | grep Pressure || echo no pressure
TcpExtTCPMemoryPressures 1 0.0
With net.core.bypass_prot_mem=1, charged to memcg only:
# sysctl -q net.core.bypass_prot_mem=1
# python3 pressure.py &
# cat /sys/fs/cgroup/test/memory.stat | grep sock
sock 2757468160 <------------------------------------ charged to memcg
# cat /proc/net/sockstat | grep TCP
TCP: inuse 2006 orphan 0 tw 0 alloc 2008 mem 0 <- NOT charged to tcp_mem
# ss -tn | head -n 5
State Recv-Q Send-Q Local Address:Port Peer Address:Port
ESTAB 111000 0 127.0.0.1:36019 127.0.0.1:49026
ESTAB 110000 0 127.0.0.1:36019 127.0.0.1:45630
ESTAB 110000 0 127.0.0.1:36019 127.0.0.1:44870
ESTAB 111000 0 127.0.0.1:36019 127.0.0.1:45274
# nstat | grep Pressure || echo no pressure
no pressure
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://patch.msgid.link/20251014235604.3057003-4-kuniyu@google.com
|
|
Some protocols (e.g., TCP, UDP) implement memory accounting for socket
buffers and charge memory to per-protocol global counters pointed to by
sk->sk_proto->memory_allocated.
Sometimes, system processes do not want that limitation. For a similar
purpose, there is SO_RESERVE_MEM for sockets under memcg.
Also, by opting out of the per-protocol accounting, sockets under memcg
can avoid paying costs for two orthogonal memory accounting mechanisms.
A microbenchmark result is in the subsequent bpf patch.
Let's allow opt-out from the per-protocol memory accounting if
sk->sk_bypass_prot_mem is true.
sk->sk_bypass_prot_mem and sk->sk_prot are placed in the same cache
line, and sk_has_account() always fetches sk->sk_prot before accessing
sk->sk_bypass_prot_mem, so there is no extra cache miss for this patch.
The following patches will set sk->sk_bypass_prot_mem to true, and
then, the per-protocol memory accounting will be skipped.
Note that this does NOT disable memcg, but rather the per-protocol one.
Another option not to use the hole in struct sock_common is create
sk_prot variants like tcp_prot_bypass, but this would complicate
SOCKMAP logic, tcp_bpf_prots etc.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://patch.msgid.link/20251014235604.3057003-3-kuniyu@google.com
|
|
If memcg is enabled, accept() acquires lock_sock() twice for each new
TCP/MPTCP socket in inet_csk_accept() and __inet_accept().
Let's move memcg operations from inet_csk_accept() to __inet_accept().
Note that SCTP somehow allocates a new socket by sk_alloc() in
sk->sk_prot->accept() and clones fields manually, instead of using
sk_clone_lock().
mem_cgroup_sk_alloc() is called for SCTP before __inet_accept(),
so I added the protocol check in __inet_accept(), but this can be
removed once SCTP uses sk_clone_lock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://patch.msgid.link/20251014235604.3057003-2-kuniyu@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into for-6.19
Pull in tip/sched/core to receive:
50653216e4ff ("sched: Add support to pick functions to take rf")
4c95380701f5 ("sched/ext: Fold balance_scx() into pick_task_scx()")
which will enable clean integration of DL server support among other things.
This conflicts with the following from sched_ext/for-6.18-fixes:
a8ad873113d3 ("sched_ext: defer queue_balance_callback() until after ops.dispatch")
which adds maybe_queue_balance_callback() to balance_scx() which is removed
by 50653216e4ff. Resolve by moving the invocation to pick_task_scx() in the
equivalent location.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Pull sched_ext/for-6.18-fixes to sync trees to receive:
05e63305c85c ("sched_ext: Fix scx_kick_pseqs corruption on concurrent scheduler loads")
to avoid conflicts with planned cgroup sub-sched support.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
When scheduling the deferred balance callbacks, check SCX_RQ_BAL_CB_PENDING
instead of SCX_RQ_BAL_PENDING. This way schedule_deferred() properly tests
whether there is already a pending request for queue_balance_callback() to
be invoked at the end of .balance().
Fixes: a8ad873113d3 ("sched_ext: defer queue_balance_callback() until after ops.dispatch")
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
With TLS enabled, records that are encrypted and appended to TLS TX
list can fail to see a retry if the underlying TCP socket is busy, for
example, hitting an EAGAIN from tcp_sendmsg_locked(). This is not known
to the NVMe TCP driver, as the TLS layer successfully generated a record.
Typically, the TLS write_space() callback would ensure such records are
retried, but in the NVMe TCP Host driver, write_space() invokes
nvme_tcp_write_space(). This causes a partially sent record in the TLS TX
list to timeout after not being retried.
This patch fixes the above by calling queue->write_space(), which calls
into the TLS layer to retry any pending records.
Fixes: be8e82caa685 ("nvme-tcp: enable TLS handshake upcall")
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.18
A moderately large collection of driver specific fixes, plus a few new
quirks and device IDs. The NAU8821 changes are a little large but more
in mechanical ways than in ways that are complex.
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc2).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
- fix soft lockupg caused by iput() added in bc986b1d756482a ("fs: stop
accessing ->i_count directly in f2fs and gfs2")
- fix a wrong block address map on multiple devices
Link: https://lore.kernel.org/oe-lkp/202509301450.138b448f-lkp@intel.com [1]
* tag 'f2fs-fix-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: fix wrong block mapping for multi-devices
f2fs: don't call iput() from f2fs_drop_inode()
|
|
When __lookup_instance() allocates a func_instance structure but fails
to allocate the must_write_set array, it returns an error without freeing
the previously allocated func_instance. This causes a memory leak of 192
bytes (sizeof(struct func_instance)) each time this error path is triggered.
Fix by freeing 'result' on must_write_set allocation failure.
Fixes: b3698c356ad9 ("bpf: callchain sensitive stack liveness tracking using CFG")
Reported-by: BPF Runtime Fuzzer (BRF)
Signed-off-by: Shardul Bankar <shardulsb08@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20251016063330.4107547-1-shardulsb08@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- in tree-checker fix extref bounds check
- reorder send context structure to avoid
-Wflex-array-member-not-at-end warning
- fix extent readahead length for compressed extents
- fix memory leaks on error paths (qgroup assign ioctl, zone loading
with raid stripe tree enabled)
- fix how device specific mount options are applied, in particular the
'ssd' option will be set unexpectedly
- fix tracking of relocation state when tasks are running and
cancellation is attempted
- adjust assertion condition for folios allocated for scrub
- remove incorrect assertion checking for block group when populating
free space tree
* tag 'for-6.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: send: fix -Wflex-array-member-not-at-end warning in struct send_ctx
btrfs: tree-checker: fix bounds check in check_inode_extref()
btrfs: fix memory leaks when rejecting a non SINGLE data profile without an RST
btrfs: fix incorrect readahead expansion length
btrfs: do not assert we found block group item when creating free space tree
btrfs: do not use folio_test_partial_kmap() in ASSERT()s
btrfs: only set the device specific options after devices are opened
btrfs: fix memory leak on duplicated memory in the qgroup assign ioctl
btrfs: fix clearing of BTRFS_FS_RELOC_RUNNING if relocation already running
|
|
Pull smb server fixes from Steve French:
- Fix RPC hang due to locking bug
- Fix for memory leak in read and refcount leak (in session setup)
- Minor cleanup
* tag 'v6.18-rc1-smb-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix recursive locking in RPC handle list access
smb/server: fix possible refcount leak in smb2_sess_setup()
smb/server: fix possible memory leak in smb2_read()
smb: server: Use common error handling code in smb_direct_rdma_xmit()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN
Current release - regressions:
- udp: do not use skb_release_head_state() before
skb_attempt_defer_free()
- gro_cells: use nested-BH locking for gro_cell
- dpll: zl3073x: increase maximum size of flash utility
Previous releases - regressions:
- core: fix lockdep splat on device unregister
- tcp: fix tcp_tso_should_defer() vs large RTT
- tls:
- don't rely on tx_work during send()
- wait for pending async decryptions if tls_strp_msg_hold fails
- can: j1939: add missing calls in NETDEV_UNREGISTER notification
handler
- eth: lan78xx: fix lost EEPROM write timeout in
lan78xx_write_raw_eeprom
Previous releases - always broken:
- ip6_tunnel: prevent perpetual tunnel growth
- dpll: zl3073x: handle missing or corrupted flash configuration
- can: m_can: fix pm_runtime and CAN state handling
- eth:
- ixgbe: fix too early devlink_free() in ixgbe_remove()
- ixgbevf: fix mailbox API compatibility
- gve: Check valid ts bit on RX descriptor before hw timestamping
- idpf: cleanup remaining SKBs in PTP flows
- r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H"
* tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
udp: do not use skb_release_head_state() before skb_attempt_defer_free()
net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
netdevsim: set the carrier when the device goes up
selftests: tls: add test for short splice due to full skmsg
selftests: net: tls: add tests for cmsg vs MSG_MORE
tls: don't rely on tx_work during send()
tls: wait for pending async decryptions if tls_strp_msg_hold fails
tls: always set record_type in tls_process_cmsg
tls: wait for async encrypt in case of error during latter iterations of sendmsg
tls: trim encrypted message to match the plaintext on short splice
tg3: prevent use of uninitialized remote_adv and local_adv variables
MAINTAINERS: new entry for IPv6 IOAM
gve: Check valid ts bit on RX descriptor before hw timestamping
net: core: fix lockdep splat on device unregister
MAINTAINERS: add myself as maintainer for b53
selftests: net: check jq command is supported
net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit()
tcp: fix tcp_tso_should_defer() vs large RTT
r8152: add error handling in rtl8152_driver_init
usbnet: Fix using smp_processor_id() in preemptible code warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Do not print an error message (and assume that the General Purpose
Log Directory log page is not supported) for a device that reports a
bogus General Purpose Logging Version.
Unsurprisingly, many vendors fail to report the only valid General
Purpose Logging Version (Damien)
* tag 'ata-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: relax checks in ata_read_log_directory()
|
|
test_parse_test_list_file writes some data to
/tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
the data back. However, after writing data to that file, we forget to
call fsync() and it's causing testing failure in my laptop. This patch
helps fix it by adding the missing fsync() call.
Fixes: 64276f01dce8 ("selftests/bpf: Test_progs can read test lists from file")
Signed-off-by: Xing Guo <higuoxing@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251016035330.3217145-1-higuoxing@gmail.com
|
|
Add new parameter DRM_AMDXDNA_HW_LAST_ASYNC_ERR to get array IOCTL. When
hardware reports an error, the driver save the error information and
timestamp. This new get array parameter retrieves the last error.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20251014234119.628453-1-lizhi.hou@amd.com
|
|
The Logitech G502 Hero Wireless's high resolution scrolling resets after
being unplugged without notifying the driver, causing extremely slow
scrolling.
The only indication of this is a battery update packet, so add a quirk to
detect when the device is unplugged and re-enable the scrolling.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218037
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This function is only called from one place, which is in the interrupt
handling hot path. Inline it to improve code generation and to take
advantage of this_cpu operations. lpriv and imsic->base_domain can never be
NULL because irq_set_chained_handler() is called after they are allocated.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Reduce pointer chasing and the number of allocations by using a flexible
array member for the vector array instead of a separate allocation.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
imsic_irq_set_affinity() already takes the irq_data pointer as a
parameter, so it is pointless to look it up again from the IRQ number.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The driver has never supported anything but OF probing so drop the
unused platform alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
