| Age | Commit message (Collapse) | Author |
|---|
|
Tariq Toukan says:
====================
Fix generating skb from non-linear xdp_buff for mlx5
Link: https://lore.kernel.org/20250915225857.3024997-1-ameryhung@gmail.com
====================
Link: https://patch.msgid.link/1760644540-899148-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
XDP programs can change the layout of an xdp_buff through
bpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver
cannot assume the size of the linear data area nor fragments. Fix the
bug in mlx5 by generating skb according to xdp_buff after XDP programs
run.
Currently, when handling multi-buf XDP, the mlx5 driver assumes the
layout of an xdp_buff to be unchanged. That is, the linear data area
continues to be empty and fragments remain the same. This may cause
the driver to generate erroneous skb or triggering a kernel
warning. When an XDP program added linear data through
bpf_xdp_adjust_head(), the linear data will be ignored as
mlx5e_build_linear_skb() builds an skb without linear data and then
pull data from fragments to fill the linear data area. When an XDP
program has shrunk the non-linear data through bpf_xdp_adjust_tail(),
the delta passed to __pskb_pull_tail() may exceed the actual nonlinear
data size and trigger the BUG_ON in it.
To fix the issue, first record the original number of fragments. If the
number of fragments changes after the XDP program runs, rewind the end
fragment pointer by the difference and recalculate the truesize. Then,
build the skb with the linear data area matching the xdp_buff. Finally,
only pull data in if there is non-linear data and fill the linear part
up to 256 bytes.
Fixes: f52ac7028bec ("net/mlx5e: RX, Add XDP multi-buffer support in Striding RQ")
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1760644540-899148-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
XDP programs can release xdp_buff fragments when calling
bpf_xdp_adjust_tail(). The driver currently assumes the number of
fragments to be unchanged and may generate skb with wrong truesize or
containing invalid frags. Fix the bug by generating skb according to
xdp_buff after the XDP program runs.
Fixes: ea5d49bdae8b ("net/mlx5e: Add XDP multi buffer support to the non-linear legacy RQ")
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1760644540-899148-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Following loop in napi_skb_cache_put() is unrolled by the compiler
even if CONFIG_KASAN is not enabled:
for (i = NAPI_SKB_CACHE_HALF; i < NAPI_SKB_CACHE_SIZE; i++)
kasan_mempool_unpoison_object(nc->skb_cache[i],
kmem_cache_size(net_hotdata.skbuff_cache));
We have 32 times this sequence, for a total of 384 bytes.
48 8b 3d 00 00 00 00 net_hotdata.skbuff_cache,%rdi
e8 00 00 00 00 call kmem_cache_size
This is because kmem_cache_size() is not an inline and not const,
and kasan_unpoison_object_data() is an inline function.
Cache kmem_cache_size() result in a variable, so that
the compiler can remove dead code (and variable) when/if
CONFIG_KASAN is unset.
After this patch, napi_skb_cache_put() is inlined in its callers,
and we avoid one kmem_cache_size() call in napi_skb_cache_get()
and napi_skb_cache_get_bulk().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251016182911.1132792-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vadim Fedorenko says:
====================
convert net drivers to ndo_hwtstamp API part 1
This is part 1 of patchset to convert drivers which support HW
timestamping to use .ndo_hwtstamp_get()/.ndo_hwtstamp_set() callbacks.
The new API uses netlink to communicate with user-space and have some
test coverage. Part 2 will contain another 6 patches from v1 of the
series.
There are some drivers left with old ioctl interface after this series:
- mlx5 driver be shortly converted by nVidia folks
- TI netcp ethss driver which needs separate series which I'll post
after this one.
====================
Link: https://patch.msgid.link/20251016152515.3510991-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert driver to use .ndo_hwtstamp_get()/.ndo_hwtstamp_set() callbacks.
.ndo_eth_ioctl() implementation becomes empty, remove it.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251016152515.3510991-8-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert to .ndo_hwtstamp_get()/.ndo_hwtstamp_set() callbacks.
After conversions the rest of tsnep_netdev_ioctl() becomes pure
phy_do_ioctl_running(), so remove tsnep_netdev_ioctl() and replace
it with phy_do_ioctl_running() in .ndo_eth_ioctl.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20251016152515.3510991-7-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert to use .ndo_hwtstamp_get()/.ndo_hwtstamp_set() callbacks.
There is some change in the logic as well. Previously, the driver was
storing newly requested configuration regardless of whether it was
applied or not. In case of request validation error, inconsistent
configuration would be returned by the driver. New logic stores
configuration only if was properly validated and applied. It brings the
consistency between reported and actual configuration.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251016152515.3510991-6-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert driver to .ndo_hwtstamp_get()/.ndo_hwtstamp_set() callbacks.
.ndo_eth_ioctl() becomes empty so remove it. Also simplify code with no
functional changes.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251016152515.3510991-5-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert driver to use .ndo_hwtstamp_get()/.ndo_hwtstamp_set() callbacks.
.ndo_eth_ioctl() becomes empty function, remove it.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251016152515.3510991-4-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert driver to use .ndo_hwtstamp_get()/.ndo_hwtstamp_set() API.
.ndo_eth_ioctl() implementation becomes pure phy_do_ioctl(), remove
it from common module, remove exported symbol and replace ndo callback.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251016152515.3510991-3-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate driver to new API for HW timestamping.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251016152515.3510991-2-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For Xe3p arch some subunits of an IP may be different. The GMD_ID
register returns the Xe3p arch and dedicates the reserved field to mark
possible subunit differences. Generally this is an under-the-hood
implementation detail that drivers don't need to worry about, but the
new Main_GAMCTRL may be enabled or not depending on those.
Those reserved bits are described for Xe3p as: "If Zero, No special case
to be handled. If Non-Zero, special case to be handled by Software
agent.". That special case is defined per Arch. So if media version is
35, also check the additional reserved bits. To avoid confusion with the
usual meaning of "reserved", define them as GMD_ID_SUBIP_FLAG_MASK.
Bspec: 74201
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20251019-xe3p-gamctrl-v1-2-ad66d3c1908f@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Starting from Xe3p, there are two different copies of some of the GAM
registers: the traditional MCR variant at their old locations, and a
new unicast copy known as "main_gamctrl." The Xe driver doesn't use
these registers directly, but we need to instruct the GuC on which set
it should use. Since the new, unicast registers are preferred (since
they avoid the need for unnecessary MCR synchronization), set a new GuC
feature flag, GUC_CTL_MAIN_GAMCTRL_QUEUES to convey this decision. A
new helper function, xe_guc_using_main_gamctrl_queues(), is added for
use in the 3 independent places that need to handle configuration of the
new reporting queues.
The mmio write to enable the main gamctl is only done during the general
GuC upload. The gamctrl registers are not accessed by the GuC during
hwconfig load.
Last, the ADS blob for communicating the queue addresses contains both a
DPA and GGTT offset. The GuC documentation states that DPA is now MBZ
when using the MAIN_GAMCTRL queues.
Bspec: 76445, 73540
Signed-off-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20251019-xe3p-gamctrl-v1-1-ad66d3c1908f@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Russell King says:
====================
net: stmmac: phylink PCS conversion
This series is radical - it takes the brave step of ripping out much of
the existing PCS support code and throwing it all away.
I have discussed the introduction of the STMMAC_FLAG_HAS_INTEGRATED_PCS
flag with Bartosz Golaszewski, and the conclusion I came to is that
this is to workaround the breakage that I've been going on about
concerning the phylink conversion for the last five or six years.
The problem is that the stmmac PCS code manipulates the netif carrier
state, which confuses phylink.
There is a way of testing this out on the Jetson Xavier NX platform as
the "PCS" code paths can be exercised while in RGMII mode - because
RGMII also has in-band status and the status register is shared with
SGMII. Testing this out confirms my long held theory: the interrupt
handler manipulates the netif carrier state before phylink gets a
look-in, which means that the mac_link_up() and mac_link_down() methods
are never called, resulting in the device being non-functional.
Moreover, on dwmac4 cores, ethtool reports incorrect information -
despite having a full-duplex link, ethtool reports that it is
half-dupex.
Thus, this code is completely broken - anyone using it will not have
a functional platform, and thus it doesn't deserve to live any longer,
especially as it's a thorn in phylink.
Rip all this out, leaving just the bare bones initialisation in place.
However, this is not the last of what's broken. We have this hw->ps
integer which is really not descriptive, and the DT property from
which it comes from does little to help understand what's going on.
Putting all the clues together:
- early configuration of the GMAC configuration register for the
speed.
- setting the SGMII rate adapter layer to take its speed from the
GMAC configuration register.
Lastly, setting the transmit enable (TE) bit, which is a typo that puts
the nail in the coffin of this code. It should be the transmit
configuration (TC) bit. Given that when the link comes up, phylink
will call mac_link_up() which will overwrite the speed in the GMAC
configuration register, the only part of this that is functional is
changing where the SGMII rate adapter layer gets its speed from,
which is a boolean.
From what I've found so far, everyone who sets the snps,ps-speed
property which configures this mode also configures a fixed link,
so the pre-configuration is unnecessary - the link will come up
anyway.
So, this series rips that out the preconfiguration as well, and
replaces hw->ps with a boolean hw->reverse_sgmii_enable flag.
We then move the sole PCS configuration into a phylink_pcs instance,
which configures the PCS control register in the same way as is done
during the probe function.
Thus, we end up with much easier and simpler conversion to phylink PCS
than previous attempts.
Even so, this still results in inband mode always being enabled at
the moment in the new .pcs_config() method to reflect what the probe
function was doing. The next stage will be to change that to allow
phylink to correctly configure the PCS. This needs fixing to allow
platform glue maintainers who are currently blocked to progress.
Please note, however, that this has not been tested with any SGMII
platform.
I've tried to get as many people into the Cc list with get_maintainers,
I hope that's sufficient to get enough eyeballs on this.
Changes since RFC:
- new patch (7) to remove RGMII "pcs" mode
- new patch (8) to move reverse "pcs" mode to stmmac_check_pcs_mode()
- new patch (9) to simplify the code moved in the previous patch
- new patch (10) to rename the confusing hw->ps to something more
understandable.
- new patch (11) to shut up inappropriate complaints about
"snps,ps-speed" being invalid.
- new patch (13) to add a MAC .pcs_init method, which will only be
called when core has PCS present.
- modify patch 14 to use this new pcs_init method.
Despite getting a couple of responses to the RFC series posted in
September, I have had nothing testing this on hardware. I have tested
this on the Jetson Xavier NX, which included trial runs with enabling
the RGMII "pcs" mode, hence the new patches that rip out this mode. I
have come to the conclusion that the only way to get stmmac changes
tested is to get them merged into net-next, thereby forcing people to
have to run with them... and we'll deal with any fallout later.
====================
Link: https://patch.msgid.link/aPECqg0vZGnBFCbh@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that stmmac's PCS support is much more simple - just a matter of
configuring the control register - the basic conversion to phylink PCS
support becomes straight forward.
Create the infrastructure to setup a phylink_pcs instance for the
integrated PCS:
- add a struct stmmac_pcs to encapsulate the phylink_pcs structure,
pointer to stmmac_priv, and the core-specific base address of the PCS
registers.
- modify stmmac_priv and stmmac_mac_select_pcs() to return the embedded
phylink_pcs structure when setup and STMMAC_PCS_SGMII is in use, and
move the comment from stmmac_hw_setup() to here.
- create stmmac_pcs.c, which contains the phylink_pcs_ops structure, a
dummy .pcs_get_state() method which always reports link-down, and
.pcs_config() method, moving the call to stmmac_pcs_ctrl_ane() here,
but without indirecting through the dwmac specific core code. The
link-down behaviour mentioned above maintains the current behaviour
when phylink is used with inband but without a PCS.
This will ensure that the PCS control register is configured to the
same settings as before, but will now happen when the netdev is opened
or reusmed rather than only during probe time. However, this will be
before the .fix_mac_speed() method is called, which is critical for the
behaviour in dwmac-qcom-ethqos's ethqos_configure_sgmii() function to
be maintained.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1v9P72-0000000AomR-3ro4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dwmac cores provide a feature bit to indicate when the PCS block is
present, but features are only read after the core's setup() function
has been called, meaning we can't decide whether to initialise the
integrated PCS in the setup function. Provide a new MAC core hook
for PCS initialisation, which will be called after the feature
registers have been read.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1v9P6x-0000000AomL-3OKd@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The internal PCS registers only exist if the core is synthesized with
SGMII, TBI or RTBI support. They have no relevance for RGMII.
However, priv->hw->pcs contains a STMMAC_PCS_RGMII flag, which is set
if a PCS has been synthesized but we are operating in RGMII mode. As
the register has no effect for RGMII, there is no point calling
stmmac_pcs_ctrl_ane() in this case. Add a comment describing this
and make it conditional on STMMAC_PCS_SGMII.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1v9P6s-0000000AomE-2pAa@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
SGMII mode does not require port-speed to be specified; this only
switches SGMII to use the MAC configuration register speed settings
and the actual value is irrelevant when the link comes up.
As it seems the intention was to support "reverse SGMII" with this
setting, but the code didn't actually configure that due to a typo,
the warning and bad DT binding documentation has led people to
specify snps,ps-speed in their DT files inappropriately.
If mac_port_sel_speed is zero, then don't complain that the speed
is invalid, as this means we're using "normal" SGMII.
This does _not_ obsolete snps,ps-speed, nor does it change the
behaviour of that property, with the exception of not making people
mistakenly believe that they need to specify this option to use
normal SGMII. There is no need to modify the binding.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1v9P6n-0000000Aom9-2LuZ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After a lot of digging, it seems that the oddly named hw->ps member
is all about setting the core into reverse SGMII speed. When set to
a non-zero value, it:
1. Configures the MAC at initialisation time to operate at a specific
speed.
2. It _incorrectly_ enables the transmitter (GMAC_CONFIG_TE) which
makes no sense, rather than enabling the "transmit configuration"
bit (GMAC_CONFIG_TC).
3. It configures the SGMII rate adapter layer to retrieve its speed
setting from the MAC configuration register rather than the PHY.
In the previous commit, we removed (1) and (2) as phylink overwrites
the configuration set at that step.
Thus, the only functional aspect is (3), which is a boolean operation.
This means there is no need to store the actual speed, and just have a
boolean flag.
Convert the priv->ps member to a boolean, and rename it to
priv->reverse_sgmii_enable to make it more understandable.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1v9P6i-0000000Aom3-1y2y@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we only support one mode, simplify stmmac_check_pcs_mode().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1v9P6d-0000000Aolw-1T7d@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The broken reverse-mode, selected by snps,ps-speed, is configured when
the platform provides a valid port speed and a PCS is being used.
Both these remain constant after the driver has probed, so the software
state doesn't need to be re-initialised each time stmmac_hw_setup() is
called (which is called at open and resume time.)
Move the software setup of reverse-mode to stmmac_check_pcs_mode()
which is called from the driver probe function.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1v9P6Y-0000000Aolr-0vLH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the RGMII "pcs" code in stmmac_check_pcs_mode() due to:
1) This should never have been conditional on a PCS being present, as
when a core is synthesised using only RGMII, the PCS won't be present
and priv->dma_cap.pcs will be false. Only multi-interface cores which
have a PCS present would have detected RGMII.
2) STMMAC_PCS_RGMII has no effect since the broken netif_carrier and
ethtool code was removed.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1v9P6T-0000000Aoll-0Ify@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After a lot of digging, it seems that the oddly named hw->ps member is
all about configuring the core for reverse SGMII. This member is set to
one of 0, SPEED_10, SPEED_100 or SPEED_1000 depending on
priv->plat->mac_port_sel_speed. On DT systems, this comes from the
"snps,ps-speed" DT property.
When set to a non-zero value, it:
1. Configures the MAC at initialisation time to operate at a specific
speed. However, this will be overwritten by mac_link_up() when the
link comes up (e.g. with the fixed-link parameters.)
Note that dwxgmac2 wants to also support SPEED_2500 and SPEED_10000,
but both these values are impossible.
2. It _incorrectly_ enables the transmitter (GMAC_CONFIG_TE) which
makes no sense, rather than enabling the "transmit configuration"
bit (GMAC_CONFIG_TC). Likely a typo.
3. It configures the SGMII rate adapter layer to retrieve its speed
setting from the MAC configuration register rather than the PHY.
There are two ways forward here:
a) fixing (2) so that we set GMAC_CONFIG_TC. However, we have platform
that set the "snps,ps-speed" property and that work today. Fixing
this will cause the RGMII, SGMII or SMII inband configuration to be
transmitted, which will be a functional change which could cause a
regression.
b) ripping out (1) and (2) as they are ineffective. This also has the
possibility of regressions, but the patch author believes this risk
is much lower than (a).
Therefore, this commit takes the approach in (b).
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1v9P6N-0000000Aolg-3y0a@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Nothing calls stmmac_pcs_ctrl_ane() with the "loopback" argument set to
anything except zero, so this serves no useful purpose. Remove the
argument to reduce the code complexity.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1v9P6I-0000000Aola-3Sih@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the "we always autoneg pause" forcing when the stmmac driver
decides that a "PCS" is present, which blocks passing the ethtool
pause calls to phylink when using SGMII mode.
This prevents the pause results being reported when a PHY is attached
using SGMII mode, or the pause settings being changed in SGMII mode.
There is no reason to prevent this.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1v9P6D-0000000AolU-2zjv@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the only use for the interrupt is to clear it and increment a
statistic counter (which is not that relevant anymore) remove all this
code and ensure that the interrupt remains disabled to avoid a stuck
interrupt.
dwmac-sun8i still uses this statistic counter, so it is inappropriate
for this patch to remove it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1v9P68-0000000AolO-2W5s@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As a result of the previous commit, the pcs_link, pcs_duplex and
pcs_speed members are not used outside of the interrupt handling code,
and are only used to print their status using the misleading "Link is"
messages that bear no relation to the actual status of the link.
Remove the printing of these messages, these members, and the code
that decodes them from the hardware.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1v9P63-0000000AolI-23Kf@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Changing the netif_carrier_*() state behind phylink's back has always
been prohibited because it messes up with phylinks state tracking, and
means that phylink no longer guarantees to call the mac_link_down()
and mac_link_up() methods at the appropriate times. This was later
documented in the sfp-phylink network driver conversion guide.
stmmac was converted to phylink in 2019, but nothing was done with the
"PCS" code. Since then, apart from the updates as part of phylink
development, nothing has happened with stmmac to improve its use of
phylink, or even to address this point.
A couple of years ago, a has_integrated_pcs boolean was added by Bart,
which later became the STMMAC_FLAG_HAS_INTEGRATED_PCS flag, to avoid
manipulating the netif_carrier_*() state. This flag is mis-named,
because whenever the stmmac is synthesized for its native SGMII, TBI
or RTBI interfaces, it has an "integrated PCS". This boolean/flag
actually means "ignore the status from the integrated PCS".
Discussing with Bart, the reasons for this are lost to the winds of
time (which is why we should always document the reasons in the commit
message.)
RGMII also has in-band status, and the dwmac cores and stmmac code
supports this but with one bug that saves the day.
When dwmac cores are synthesised for RGMII only, they do not contain
an integrated PCS, and so priv->dma_cap.pcs is clear, which prevents
(incorrectly) the "RGMII PCS" being used, meaning we don't read the
in-band status. However, a core synthesised for RGMII and also SGMII,
TBI or RTBI will have this capability bit set, thus making these
code paths reachable.
The Jetson Xavier NX uses RGMII mode to talk to its PHY, and removing
the incorrect check for priv->dma_cap.pcs reveals the theortical issue
with netif_carrier_*() manipulation is real:
dwc-eth-dwmac 2490000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
dwc-eth-dwmac 2490000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=141)
dwc-eth-dwmac 2490000.ethernet eth0: No Safety Features support found
dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
dwc-eth-dwmac 2490000.ethernet eth0: configuring for phy/rgmii-id link mode
8021q: adding VLAN 0 to HW filter on device eth0
dwc-eth-dwmac 2490000.ethernet eth0: Adding VLAN ID 0 is not supported
Link is Up - 1000/Full
Link is Down
Link is Up - 1000/Full
This looks good until one realises that the phylink "Link" status
messages are missing, even when the RJ45 cable is reconnected. Nothing
one can do results in the interface working. The interrupt handler
(which prints those "Link is" messages) always wins over phylink's
resolve worker, meaning phylink never calls the mac_link_up() nor
mac_link_down() methods.
eth0 also sees no traffic received, and is unable to obtain a DHCP
address:
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group defa
ult qlen 1000
link/ether e6:d3:6a:e6:92:de brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped overrun mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
27686 149 0 0 0 0
With the STMMAC_FLAG_HAS_INTEGRATED_PCS flag set, which disables the
netif_carrier_*() manipulation then stmmac works normally:
dwc-eth-dwmac 2490000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
dwc-eth-dwmac 2490000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=141)
dwc-eth-dwmac 2490000.ethernet eth0: No Safety Features support found
dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
dwc-eth-dwmac 2490000.ethernet eth0: configuring for phy/rgmii-id link mode
8021q: adding VLAN 0 to HW filter on device eth0
dwc-eth-dwmac 2490000.ethernet eth0: Adding VLAN ID 0 is not supported
Link is Up - 1000/Full
dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
and packets can be transferred.
This clearly shows that when priv->hw->pcs is set, but
STMMAC_FLAG_HAS_INTEGRATED_PCS is clear, the driver reliably fails.
Discovering whether a platform falls into this is impossible as
parsing all the dtsi and dts files to find out which use the stmmac
driver, whether any of them use RGMII or SGMII and also depends
whether an external interface is being used. The kernel likely
doesn't contain all dts files either.
The only driver that sets this flag uses the qcom,sa8775p-ethqos
compatible, and uses SGMII or 2500BASE-X.
but these are saved from this problem by the incorrect check for
priv->dma_cap.pcs.
So, we have to assume that for every other platform that uses SGMII
with stmmac is using an external PCS.
Moreover, ethtool output can be incorrect. With the full-duplex link
negotiated, ethtool reports:
Speed: 1000Mb/s
Duplex: Half
because with dwmac4, the full-duplex bit is in bit 16 of the status,
priv->xstats.pcs_duplex becomes BIT(16) for full duplex, but the
ethtool ksettings duplex member is u8 - so becomes zero. Moreover,
the supported, advertised and link partner modes are all "not
reported".
Finally, ksettings_set() won't be able to set the advertisement on
a PHY if this PCS code is activated, which is incorrect when SGMII
is used with a PHY.
Thus, remove:
1. the incorrect netif_carrier_*() manipulation.
2. the broken ethtool ksettings code.
Given that all uses of STMMAC_FLAG_HAS_INTEGRATED_PCS are now gone,
remove the flag from stmmac.h and dwmac-qcom-ethqos.c.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1v9P5y-0000000AolC-1QWH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct multiple kernel-doc warnings in nl802154.h:
- Fix a typo on one enum name to avoid a kernel-doc warning.
- Drop 2 enum descriptions that are no longer needed.
- Mark 2 internal enums as "private:" so that kernel-doc is not needed
for them.
Warning: nl802154.h:239 Enum value 'NL802154_CAP_ATTR_MAX_MAXBE' not described in enum 'nl802154_wpan_phy_capability_attr'
Warning: nl802154.h:239 Excess enum value '%NL802154_CAP_ATTR_MIN_CCA_ED_LEVEL' description in 'nl802154_wpan_phy_capability_attr'
Warning: nl802154.h:239 Excess enum value '%NL802154_CAP_ATTR_MAX_CCA_ED_LEVEL' description in 'nl802154_wpan_phy_capability_attr'
Warning: nl802154.h:369 Enum value '__NL802154_CCA_OPT_ATTR_AFTER_LAST' not described in enum 'nl802154_cca_opts'
Warning: nl802154.h:369 Enum value 'NL802154_CCA_OPT_ATTR_MAX' not described in enum 'nl802154_cca_opts'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251016035917.1148012-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The madvise implementation currently resets the SVM madvise if the
underlying CPU map is unmapped. This is in an attempt to mimic the
CPU madvise behaviour. However, it's not clear that this is a desired
behaviour since if the end app user relies on it for malloc()ed
objects or stack objects, it may not work as intended.
Instead of having the autoreset functionality being a direct
application-facing implicit UAPI, make the UMD explicitly choose
this behaviour if it wants to expose it by introducing
DRM_XE_VM_BIND_FLAG_MADVISE_AUTORESET, and add a semantics
description.
v2:
- Kerneldoc fixes. Fix a commit log message.
Fixes: a2eb8aec3ebe ("drm/xe: Reset VMA attributes to default in SVM garbage collector")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: "Falkowski, John" <john.falkowski@intel.com>
Cc: "Mrozek, Michal" <michal.mrozek@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251015170726.178685-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit 59a2d3f38ab23cce4cd9f0c4a5e08fdfe9e67ae7)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
When splitting and restoring vmas for madvise, we only copied the
XE_VMA_SYSTEM_ALLOCATOR flag. That meant we lost flags for read_only,
dumpable and sparse (in case anyone would call madvise for the latter).
Instead, define a mask of relevant flags and ensure all are replicated,
To simplify this and make the code a bit less fragile, remove the
conversion to VMA_CREATE flags and instead just pass around the
gpuva flags after initial conversion from user-space.
Fixes: a2eb8aec3ebe ("drm/xe: Reset VMA attributes to default in SVM garbage collector")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251015170726.178685-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit b3af8658ec70f2196190c66103478352286aba3b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Cpus serving NIC interrupts and specifically TX completions are often
trapped in also restarting a busy qdisc (because qdisc was stopped by BQL
or the driver's own flow control).
When they call netdev_tx_completed_queue() or netif_tx_wake_queue(),
they call __netif_schedule() so that the queue can be run
later from net_tx_action() (involving NET_TX_SOFTIRQ)
Quite often, by the time the cpu reaches net_tx_action(), another cpu
grabbed the qdisc spinlock from __dev_xmit_skb(), and we spend too much
time spinning on this lock.
We can detect in __netif_schedule() if a cpu is already at a specific
point in __dev_xmit_skb() where we have the guarantee the queue will
be run.
This patch gives a 13 % increase of throughput on an IDPF NIC (200Gbit),
32 TX qeues, sending UDP packets of 120 bytes.
This also helps __qdisc_run() to not force a NET_TX_SOFTIRQ
if another thread is waiting in __dev_xmit_skb()
Before:
sar -n DEV 5 5|grep eth1|grep Average
Average: eth1 1496.44 52191462.56 210.00 13369396.90 0.00 0.00 0.00 54.76
After:
sar -n DEV 5 5|grep eth1|grep Average
Average: eth1 1457.88 59363099.96 205.08 15206384.35 0.00 0.00 0.00 62.29
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251017145334.3016097-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix several spelling and grammatical errors in comments across
micrel PHY drivers. Corrections include:
- "dealy" -> "delay"
- "autonegotation" -> "autonegotiation"
- "recheas" -> "reaches"
- "one" -> "on"
- "improvenent" -> "improvement"
- "intput" -> "input"
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251017193525.1457064-2-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ksz9477_phy_errata function currently assigns the return value of
genphy_restart_aneg() to a variable and then immediately returns it
err = genphy_restart_aneg(phydev);
if (err)
return err;
return err;
This can be simplified by directly returning the function call
result, as the intermediate variable and conditional are redundant.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251017193525.1457064-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sctp_vrf.sh could fail:
TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [FAIL]
not ok 1 selftests: net: sctp_vrf.sh # exit=3
The failure happens when the server bind in a new run conflicts with an
existing association from the previous run:
[1] ip netns exec $SERVER_NS ./sctp_hello server ...
[2] ip netns exec $CLIENT_NS ./sctp_hello client ...
[3] ip netns exec $SERVER_NS pkill sctp_hello ...
[4] ip netns exec $SERVER_NS ./sctp_hello server ...
It occurs if the client in [2] sends a message and closes immediately.
With the message unacked, no SHUTDOWN is sent. Killing the server in [3]
triggers a SHUTDOWN the client also ignores due to the unacked message,
leaving the old association alive. This causes the bind at [4] to fail
until the message is acked and the client responds to a second SHUTDOWN
after the server’s T2 timer expires (3s).
This patch fixes the issue by preventing the client from sending data.
Instead, the client blocks on recv() and waits for the server to close.
It also waits until both the server and the client sockets are fully
released in stop_server and wait_client before restarting.
Additionally, replace 2>&1 >/dev/null with -q in sysctl and grep, and
drop other redundant 2>&1 >/dev/null redirections, and fix a typo from
N to Y (connect successfully) in the description of the last test.
Fixes: a61bd7b9fef3 ("selftests: add a selftest for sctp vrf")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/be2dacf52d0917c4ba5e2e8c5a9cb640740ad2b6.1760731574.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ioctl returns 0 upon success, so !0 returning -1 breaks the selftest.
Drop the '!' to fix it.
Fixes: 1d235d849425 ("iommu/selftest: prevent use of uninitialized variable")
Link: https://patch.msgid.link/r/20251014214847.1113759-1-nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
If pgshift is 63 then BITS_PER_TYPE(*bitmap->bitmap) * pgsize will overflow
to 0 and this triggers divide by 0.
In this case the index should just be 0, so reorganize things to divide
by shift and avoid hitting any overflows.
Link: https://patch.msgid.link/r/0-v1-663679b57226+172-iommufd_dirty_div0_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: 58ccf0190d19 ("vfio: Add an IOVA bitmap support")
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: syzbot+093a8a8b859472e6c257@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=093a8a8b859472e6c257
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In more complex cases, initializers need to run arbitrary code before
assigning initializers to fields. While this is possible using the
underscore codeblock feature (`_: {}`), values returned by such
functions cannot be used from later field initializers.
The two new functions `[pin_]init_scope` allow users to first run some
fallible code and then return an initializer which the function turns
into a single initializer. This permits using the same value multiple
times by different fields.
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
[ Fix typo in commit message: s/functinos/functions/. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Discovery related members are now part of amdgpu_discovery_info.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Query block error count of ras module.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
crit_region offsets
1. Added VF logic to init data exchange region using the offsets from dynamic(v2) critical regions;
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
crit_region offsets
1. Added VF logic in amdgpu_virt to init IP discovery using the offsets from dynamic(v2) critical regions;
2. Added VF logic in amdgpu_virt to init bios image using the offsets from dynamic(v2) critical regions;
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- During guest driver init, asa VFs receive PF msg to
init dynamic critical region(v2), VFs reuse fw_vram_usage_*
from ttm to store critical region tables in a 5MB chunk.
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Introduced amdgpu_virt_init_critical_region during VF init.
- VFs use init_data_header_offset and init_data_header_size_kb
transmitted via PF2VF mailbox to fetch the offset of
critical regions' offsets/sizes in VRAM and save to
adev->virt.crit_region_offsets and adev->virt.crit_region_sizes_kb.
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Added enum amd_sriov_crit_region_version to support multi versions
2. Added logic in SRIOV mailbox to regonize crit_region version during
req_gpu_init_data
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
suffix
- This change prepares the later patches to intro _v2 suffix to SRIOV critical regions
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Query bad page info of ras module.
V2:
Update code to reuse bad page output code.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ras module supports error injection.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update function and remove redundant code:
1. Update function to prepare for internal use.
2. Remove unused function code previously prepared
for ioctl.
V2:
Update commit message content.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
