| Age | Commit message (Collapse) | Author |
|---|
|
Bao D. Nguyen <quic_nguyenb@quicinc.com> says:
Multiple ufs device manufacturers request support for the
UFS_DEVICE_QUIRK_DELAY_AFTER_LPM quirk in the Qualcomm's platform
driver. After checking further with the major UFS manufacturers
engineering teams such as Samsung, Kioxia, SK Hynix and Micron, all
the manufacturers require this quirk. Since the quirk is needed by all
the ufs device manufacturers, remove the quirk in the ufs core driver
and implement a universal delay for all the ufs devices.
In addition to verifying with the public device's datasheets, the ufs
device manufacturer's engineering teams confirmed the required vcc
power-off time for the devices is a minimum of 1ms before vcc can be
powered on again. The existing 5ms delay implemented in the ufs core
driver seems too conservative, so replace the hard coded 5ms delay
with a variable default to 2ms setting to improve the system resume
latency. The platform drivers can override this setting as needed.
Link: https://patch.msgid.link/cover.1760383740.git.quic_nguyenb@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The failure of this check only results in a security mitigation being
applied, slightly affecting performance of the compiled BPF program. It
doesn't result in a failed syscall, an thus auditing a failed LSM
permission check for it is unwanted. For example with SELinux, it causes
a denial to be reported for confined processes running as root, which
tends to be flagged as a problem to be fixed in the policy. Yet
dontauditing or allowing CAP_SYS_ADMIN to the domain may not be
desirable, as it would allow/silence also other checks - either going
against the principle of least privilege or making debugging potentially
harder.
Fix it by changing it from capable() to ns_capable_noaudit(), which
instructs the LSMs to not audit the resulting denials.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2369326
Fixes: d4e89d212d40 ("x86/bpf: Call branch history clearing sequence on exit")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20251021122758.2659513-1-omosnace@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After the UFS device VCC is powered off, all the UFS device
manufacturers require a minimum of 1ms of power-off time before VCC can
be powered on again. This requirement has been verified with all the UFS
device manufacturer's datasheets.
Replace the hard coded 5ms delay with a variable with a default setting
of 2ms to improve the system resume latency. The platform drivers can
override this setting as needed.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/72fa649406a0bf02271575b7d58f22c968aa5d7e.1760383740.git.quic_nguyenb@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After the UFS device VCC is turned off, all the UFS device manufacturers
require a period of power-off time before the VCC can be turned on
again. This requirement has been confirmed with all the UFS device
manufacturer's datasheets.
Remove the UFS_DEVICE_QUIRK_DELAY_AFTER_LPM quirk in the UFS core driver
and implement a universal delay that is required by all the UFS device
manufacturers. In addition, remove the support for this quirk in the
platform drivers.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/25f134d5a42e8b8365be64d512d1bb5fc2bce6ff.1760383740.git.quic_nguyenb@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Enhance the ufshcd_print_tr() function to support dumping completion
queue (CQ) entries in MCQ mode when an error occurs. This addition
provides more detailed debugging information by including the CQ entry
data in the error logs, aiding in the diagnosis of issues in MCQ mode.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251016023507.1000664-3-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update the completion queue (CQ) entry format according to the UFS 4.1
specification. UFS 4.1 introduces new members in reserved record
DW5. Also refine DW4 with detailed members defined in UFS 4.0. Modify
the code to incorporate these changes by updating the overall_status in
the CQ entry structure.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251016023507.1000664-2-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This change allows removing multiple casts and hence improves type
checking by the compiler.
Cc: Hannes Reinecke <hare@suse.de>
Suggested-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251014220426.3690007-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_decide_disposition() may call scsi_check_sense().
scsi_decide_disposition() calls are not serialized. Hence, counter
updates by scsi_check_sense() must be serialized. Hence this patch that
makes the counters updated by scsi_check_sense() atomic.
Cc: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Fixes: a5d518cd4e3e ("scsi: core: Add counters for New Media and Power On/Reset UNIT ATTENTIONs")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Link: https://patch.msgid.link/20251014220244.3689508-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Hangbin Liu says:
====================
net: common feature compute for upper interface
Some high-level virtual drivers need to compute features from their
lower devices, but each currently has its own implementation and may
miss some feature computations. This patch set introduces a common function
to compute features for such devices.
Currently, bonding, team, and bridge have been updated to use the new
helper.
====================
Link: https://patch.msgid.link/20251017034155.61990-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, bridge ignored all features propagation and DST retention,
only handling explicitly the GSO limits.
By switching to the new helper netdev_compute_master_upper_features(), the bridge
now expose additional features, depending on the lowers capabilities.
Since br_set_gso_limits() is already covered by the helper, it can be
removed safely.
Bridge has it's own way to update needed_headroom. So we don't need to
update it in the helper.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20251017034155.61990-5-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the new helper netdev_compute_master_upper_features() to compute the
team device features. This helper performs both the feature computation
and the netdev_change_features() call.
Note that such change replace the lower layer traversing currently done
using team->port_list with netdev_for_each_lower_dev(). Such change is
safe as `port_list` contains exactly the same elements as
`team->dev->adj_list.lower` and the helper is always invoked under the
RTNL lock.
With this change, the explicit netdev_change_features() in team_add_slave()
can be safely removed, as team_port_add() already takes care of the
notification via netdev_compute_master_upper_features(), and same thing for
team_del_slave()
This also fixes missing computations for MPLS, XFRM, and TSO/GSO partial
features.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20251017034155.61990-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the new functon netdev_compute_master_upper_features() to compute the bonding
features.
Note that bond_compute_features() currently uses bond_for_each_slave()
to traverse the lower devices list, and that is just a macro wrapper of
netdev_for_each_lower_private(). We use similar helper
netdev_for_each_lower_dev() in netdev_compute_master_upper_features() to
iterate the slave device, as there is not need to get the private data.
No functional change intended.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20251017034155.61990-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some high level software drivers need to compute features from lower
devices. But each has their own implementations and may lost some
feature compute. Let's use one common function to compute features
for kinds of these devices.
The new helper uses the current bond implementation as the reference
one, as the latter already handles all the relevant aspects: netdev
features, TSO limits and dst retention.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20251017034155.61990-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A value of an attribute will be initialized at ufshcd_dme_get_attr().
There is no need to initialize a tx_lanes.
Signed-off-by: Wonkon Kim <wkon.kim@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251020061539.28661-3-wkon.kim@samsung.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If ufshcd_send_cmd() fails, *mib_val may have a garbage value. It can
get an unintended value of an attribute.
Make ufshcd_dme_get_attr() always initialize *mib_val.
Fixes: 12b4fdb4f6bc ("[SCSI] ufs: add dme configuration primitives")
Signed-off-by: Wonkon Kim <wkon.kim@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251020061539.28661-2-wkon.kim@samsung.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the issue where host_sem is not released due to a new return path in
commit f966e02ae521 ("scsi: ufs: core: Fix runtime suspend error
deadlock").
Check pm_op_in_progress before acquiring hba->host_sem to prevent
deadlocks and ensure proper resource management during error
handling. Add comment for use ufshcd_rpm_get_noresume() to safely
perform link recovery without interfering with ongoing PM operations.
Fixes: f966e02ae521 ("scsi: ufs: core: Fix runtime suspend error deadlock")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251008065651.1589614-2-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-10-20
All patches are by me. The first 3 update the bxcan, esd and rockchip
driver to drop skbs in xmit of the device is in listen only mode.
The last patch targets the CAN netlink implementation to allow the
disabling of automatic restart after Bus-Off, even if the a driver
doesn't implement that callback.
* tag 'linux-can-fixes-for-6.18-20251020' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: netlink: can_changelink(): allow disabling of automatic restart
can: rockchip-canfd: rkcanfd_start_xmit(): use can_dev_dropped_skb() instead of can_dropped_invalid_skb()
can: esd: acc_start_xmit(): use can_dev_dropped_skb() instead of can_dropped_invalid_skb()
can: bxcan: bxcan_start_xmit(): use can_dev_dropped_skb() instead of can_dropped_invalid_skb()
====================
Link: https://patch.msgid.link/20251020152516.1590553-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update the mailing list subscription information for the linux-hams
mailing list.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251020052716.3136773-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found that the local_unlock_nested_bh() call was
missing in some cases.
WARNING: possible recursive locking detected
syzkaller #0 Not tainted
--------------------------------------------
syz.2.329/7421 is trying to acquire lock:
ffffe8ffffd48888 ((&cell->bh_lock)){+...}-{3:3}, at: spin_lock include/linux/spinlock_rt.h:44 [inline]
ffffe8ffffd48888 ((&cell->bh_lock)){+...}-{3:3}, at: gro_cells_receive+0x404/0x790 net/core/gro_cells.c:30
but task is already holding lock:
ffffe8ffffd48888 ((&cell->bh_lock)){+...}-{3:3}, at: spin_lock include/linux/spinlock_rt.h:44 [inline]
ffffe8ffffd48888 ((&cell->bh_lock)){+...}-{3:3}, at: gro_cells_receive+0x404/0x790 net/core/gro_cells.c:30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock((&cell->bh_lock));
lock((&cell->bh_lock));
*** DEADLOCK ***
Given the introduction of @have_bh_lock variable, it seems the author
intent was to have the local_unlock_nested_bh() after the @unlock label.
Fixes: 25718fdcbdd2 ("net: gro_cells: Use nested-BH locking for gro_cell")
Reported-by: syzbot+f9651b9a8212e1c8906f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68f65eb9.a70a0220.205af.0034.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20251020161114.1891141-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function devlink_port_region_get_by_name() incorrectly uses
region->ops->name to compare the region name. as it is not any critical
impact as ops and port_ops define as union for devlink_region but as per
code logic it should refer port_ops here.
No functional impact as ops and port_ops are part of same union,
and name is the first member of both.
Update it to use region->port_ops->name to properly reference
the name of the devlink port region.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20251020170916.1741808-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: handle late ADD_ADDR + selftests skip
Here are a few independent fixes related to MPTCP and its selftests:
- Patch 1: correctly handle ADD_ADDR being received after the switch to
'fully-established'. A fix for another recent fix backported up to
v5.14.
- Patches 2-5: properly mark some MPTCP Join subtests as 'skipped' if
the tested kernel doesn't support the feature being validated. Some
fixes for up to v5.13, v5.18, v6.11 and v6.18-rc1 respectively.
====================
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-0-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: c912f935a5c7 ("selftests: mptcp: join: validate new laminar endp")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-5-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: b5e2fb832f48 ("selftests: mptcp: add explicit test case for remove/readd")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-4-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: 36c4127ae8dd ("selftests: mptcp: join: skip implicit tests if not supported")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-3-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: e06959e9eebd ("selftests: mptcp: join: test for flush/re-add endpoints")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-2-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The special C-flag case expects the ADD_ADDR to be received when
switching to 'fully-established'. But for various reasons, the ADD_ADDR
could be sent after the "4th ACK", and the special case doesn't work.
On NIPA, the new test validating this special case for the C-flag failed
a few times, e.g.
102 default limits, server deny join id 0
syn rx [FAIL] got 0 JOIN[s] syn rx expected 2
Server ns stats
(...)
MPTcpExtAddAddrTx 1
MPTcpExtEchoAdd 1
Client ns stats
(...)
MPTcpExtAddAddr 1
MPTcpExtEchoAddTx 1
synack rx [FAIL] got 0 JOIN[s] synack rx expected 2
ack rx [FAIL] got 0 JOIN[s] ack rx expected 2
join Rx [FAIL] see above
syn tx [FAIL] got 0 JOIN[s] syn tx expected 2
join Tx [FAIL] see above
I had a suspicion about what the issue could be: the ADD_ADDR might have
been received after the switch to the 'fully-established' state. The
issue was not easy to reproduce. The packet capture shown that the
ADD_ADDR can indeed be sent with a delay, and the client would not try
to establish subflows to it as expected.
A simple fix is not to mark the endpoints as 'used' in the C-flag case,
when looking at creating subflows to the remote initial IP address and
port. In this case, there is no need to try.
Note: newly added fullmesh endpoints will still continue to be used as
expected, thanks to the conditions behind mptcp_pm_add_addr_c_flag_case.
Fixes: 4b1ff850e0c1 ("mptcp: pm: in-kernel: usable client side with C-flag")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-1-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The initial m.delta[0] also needs to be checked against zero.
In addition, also drop the redundant logic that errors out for
lcn == 0 / m.delta[0] == 1 case.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Robert reported an infinite loop observed by two crafted images.
The root cause is that `clusterofs` can be larger than `lclustersize`
for !NONHEAD `lclusters` in corrupted subpage compact indexes, e.g.:
blocksize = lclustersize = 512 lcn = 6 clusterofs = 515
Move the corresponding check for full compress indexes to
`z_erofs_load_lcluster_from_disk()` to also cover subpage compact
compress indexes.
It also fixes the position of `m->type >= Z_EROFS_LCLUSTER_TYPE_MAX`
check, since it should be placed right after
`z_erofs_load_{compact,full}_lcluster()`.
Fixes: 8d2517aaeea3 ("erofs: fix up compacted indexes for block size < 4096")
Fixes: 1a5223c182fd ("erofs: do sanity check on m->type in z_erofs_load_compact_lcluster()")
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/r/35167.1760645886@localhost
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Recent changes require the raw folio flags to be accessed via ".f". The
merge commit introducing this change adapted most architecture code but
forgot the csky abiv2.
[rppt@kernel.org: add fix for arch/csky/abiv2/cacheflush.c]
Link: https://lkml.kernel.org/r/aPCE238oxAB9QcZa@kernel.org
Fixes: 53fbef56e07d ("mm: introduce memdesc_flags_t")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When damos_commit_quota_goals() is called for adding new DAMOS quota goals
of DAMOS_QUOTA_USER_INPUT metric, current_value fields of the new goals
should be also set as requested.
However, damos_commit_quota_goals() is not updating the field for the
case, since it is setting only metrics and target values using
damos_new_quota_goal(), and metric-optional union fields using
damos_commit_quota_goal_union(). As a result, users could see the first
current_value parameter that committed online with a new quota goal is
ignored. Users are assumed to commit the current_value for
DAMOS_QUOTA_USER_INPUT quota goals, since it is being used as a feedback.
Hence the real impact would be subtle. That said, this is obviously not
intended behavior.
Fix the issue by using damos_commit_quota_goal() which sets all quota goal
parameters, instead of damos_commit_quota_goal_union(), which sets only
the union fields.
Link: https://lkml.kernel.org/r/20251014001846.279282-1-sj@kernel.org
Fixes: 1aef9df0ee90 ("mm/damon/core: commit damos_quota_goal->nid")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damon_destroy_scheme
Currently, damon_destroy_scheme() only cleans up the filter list but
leaves ops_filter untouched, which could lead to memory leaks when a
scheme is destroyed.
This patch ensures both filter and ops_filter are properly freed in
damon_destroy_scheme(), preventing potential memory leaks.
Link: https://lkml.kernel.org/r/20251014084225.313313-1-lienze@kylinos.cn
Fixes: ab82e57981d0 ("mm/damon/core: introduce damos->ops_filters")
Signed-off-by: Enze Li <lienze@kylinos.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Tested-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When hugetlb_vmdelete_list() processes VMAs during truncate operations, it
may encounter VMAs where huge_pmd_unshare() is called without the required
shareable lock. This triggers an assertion failure in
hugetlb_vma_assert_locked().
The previous fix in commit dd83609b8898 ("hugetlbfs: skip VMAs without
shareable locks in hugetlb_vmdelete_list") skipped entire VMAs without
shareable locks to avoid the assertion. However, this prevented pages
from being unmapped and freed, causing a regression in
fallocate(PUNCH_HOLE) operations where pages were not freed immediately,
as reported by Mark Brown.
Instead of checking locks in the caller or skipping VMAs, move the lock
assertions in huge_pmd_unshare() to after the early return checks. The
assertions are only needed when actual PMD unsharing work will be
performed. If the function returns early because sz != PMD_SIZE or the
PMD is not shared, no locks are required and assertions should not fire.
This approach reverts the VMA skipping logic from commit dd83609b8898
("hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list")
while moving the assertions to avoid the assertion failure, keeping all
the logic within huge_pmd_unshare() itself and allowing page unmapping and
freeing to proceed for all VMAs.
Link: https://lkml.kernel.org/r/20251014113344.21194-1-kartikey406@gmail.com
Fixes: dd83609b8898 ("hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reported-by: <syzbot+f26d7c75c26ec19790e7@syzkaller.appspotmail.com>
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://syzkaller.appspot.com/bug?extid=f26d7c75c26ec19790e7
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Oscar Salvador <osalvador@suse.de>
Tested-by: <syzbot+f26d7c75c26ec19790e7@syzkaller.appspotmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When migrating a balloon page, we first deflate the old page to then
inflate the new page.
However, if inflating the new page succeeded, we effectively deflated the
old page, reducing the balloon size.
In that case, the migration actually worked: similar to migrating+
immediately deflating the new page. The old page will be freed back to
the buddy.
Right now, the core will leave the page be marked as isolated (as we
returned an error). When later trying to putback that page, we will run
into the WARN_ON_ONCE() in balloon_page_putback().
That handling was changed in commit 3544c4faccb8 ("mm/balloon_compaction:
stop using __ClearPageMovable()"); before that change, we would have
tolerated that way of handling it.
To fix it, let's just return 0 in that case, making the core effectively
just clear the "isolated" flag + freeing it back to the buddy as if the
migration succeeded. Note that the new page will also get freed when the
core puts the last reference.
Note that this also makes it all be more consistent: we will no longer
unisolate the page in the balloon driver while keeping it marked as being
isolated in migration core.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20251014124455.478345-1-david@redhat.com
Fixes: 3544c4faccb8 ("mm/balloon_compaction: stop using __ClearPageMovable()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Each damon_ctx maintains callback requests using a linked list
(damon_ctx->call_controls). When a new callback request is received via
damon_call(), the new request should be added to the list. However, the
function is making a mistake at list_add_tail() invocation: putting the
new item to add and the list head to add it before, in the opposite order.
Because of the linked list manipulation implementation, the new request
can still be reached from the context's list head. But the list items
that were added before the new request are dropped from the list.
As a result, the callbacks are unexpectedly not invocated. Worse yet, if
the dropped callback requests were dynamically allocated, the memory is
leaked. Actually DAMON sysfs interface is using a dynamically allocated
repeat-mode callback request for automatic essential stats update. And
because the online DAMON parameters commit is using a non-repeat-mode
callback request, the issue can easily be reproduced, like below.
# damo start --damos_action stat --refresh_stat 1s
# damo tune --damos_action stat --refresh_stat 1s
The first command dynamically allocates the repeat-mode callback request
for automatic essential stat update. Users can see the essential stats
are automatically updated for every second, using the sysfs interface.
The second command calls damon_commit() with a new callback request that
was made for the commit. As a result, the previously added repeat-mode
callback request is dropped from the list. The automatic stats refresh
stops working, and the memory for the repeat-mode callback request is
leaked. It can be confirmed using kmemleak.
Fix the mistake on the list_add_tail() call.
Link: https://lkml.kernel.org/r/20251014205939.1206-1-sj@kernel.org
Fixes: 004ded6bee11 ("mm/damon: accept parallel damon_call() requests")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit b714ccb02a76 ("mm/mremap: complete refactor of move_vma()")
mistakenly introduced a new behaviour - clearing the VM_ACCOUNT flag of
the old mapping when a mapping is mremap()'d with the MREMAP_DONTUNMAP
flag set.
While we always clear the VM_LOCKED and VM_LOCKONFAULT flags for the old
mapping (the page tables have been moved, so there is no data that could
possibly be locked in memory), there is no reason to touch any other VMA
flags.
This is because after the move the old mapping is in a state as if it were
freshly mapped. This implies that the attributes of the mapping ought to
remain the same, including whether or not the mapping is accounted.
Link: https://lkml.kernel.org/r/20251013165836.273113-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Fixes: b714ccb02a76 ("mm/mremap: complete refactor of move_vma()")
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull VFIO fixlet from Alex Williamson:
"A tiny update as I'm changing jobs. Different email, same signing key
for now.
- Update VFIO maintainers entry (Alex Williamson)"
* tag 'vfio-v6.18-rc3' of https://github.com/awilliam/linux-vfio:
MAINTAINERS: Update Alex Williamson's email address
|
|
cded46d97159 ("sched_ext: Make scx_bpf_dsq_insert*() return bool")
introduced a new bool-returning scx_bpf_dsq_insert() and renamed the old
void-returning version to scx_bpf_dsq_insert___compat, with the expectation
that libbpf would match old binaries to the ___compat variant, maintaining
backward binary compatibility. However, while libbpf ignores ___suffix on
the BPF side when matching symbols, it doesn't do so for kernel-side symbols.
Old binaries compiled with the original scx_bpf_dsq_insert() could no longer
resolve the symbol.
Fix by reversing the naming: Keep scx_bpf_dsq_insert() as the old
void-returning interface and add ___v2 to the new bool-returning version.
This allows old binaries to continue working while new code can use the
___v2 variant. Once libbpf is updated to ignore kernel-side ___SUFFIX, the
___v2 suffix can be dropped when the compat interface is removed.
v2: Use ___v2 instead of ___new.
Fixes: cded46d97159 ("sched_ext: Make scx_bpf_dsq_insert*() return bool")
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Networking no longer has their own comment style, and checkpatch no
longer checks for this.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251017203719.1554224-2-briannorris@chromium.org>
|
|
Ironically, the block style comments in the checkpatch documentation are
not aligned properly. Correct that.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251017203719.1554224-1-briannorris@chromium.org>
|
|
Since the reliance on ARM-specific struct pci_sys_data was removed, this
driver can be compile-tested on other architectures.
While at it, make the help text a bit more generic, as some members of
the R-Car Gen2 family have a different number of internal PCI
controllers.
Fixes: 4a957563fe0231e0 ("PCI: rcar-gen2: Convert to use modern host bridge probe functions")
Suggested-by: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: add rcar-gen2 to subject]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/00f75d6732eacce93f04ffaeedc415d2db714cd6.1759480426.git.geert+renesas@glider.be
|
|
gdb and kgdb debugging documentation were moved to
Documentation/process/debugging/ as a part of
Commit d5af79c05e9382d38b8546dc5362381ce07ba3d1 ("Documentation: move
dev-tools debugging files to process/debugging/"), but translations/
were not updated. Fix them
Signed-off-by: Ally Heev <allyheev@gmail.com>
Fixes: d5af79c05e938 ("Documentation: move dev-tools debugging files to process/debugging/")
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251020-aheev-fix-docs-dev-tools-broken-links-v2-1-7db64bf0405a@gmail.com>
|
|
Both the start address and size are incorrect for the apm_sysreg DT
node. Update to match the TRM (rather than how it was defined
downstream).
Fixes: ea89fdf24fd9 ("arm64: dts: exynos: google: Add initial Google gs101 SoC support")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20251013-automatic-clocks-v1-5-72851ee00300@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The memory map lists each clock module unit as having a size of
0x10000. Additionally there are some undocumented registers in this region
that need to be used for automatic clock gating mode. Some of those
registers also need to be saved/restored on suspend & resume.
Fixes: 86124c76683e ("arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller")
Fixes: 4982a4a2092e ("arm64: dts: exynos: gs101: enable cmu-hsi0 clock controller")
Fixes: 7d66d98b5bf3 ("arm64: dts: exynos: gs101: enable cmu-peric1 clock controller")
Fixes: e62c706f3aa0 ("arm64: dts: exynos: gs101: enable cmu-peric0 clock controller")
Fixes: ea89fdf24fd9 ("arm64: dts: exynos: google: Add initial Google gs101 SoC support")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20251013-automatic-clocks-v1-4-72851ee00300@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add syscon DT node for the hsi0 and misc sysreg controllers. These will
be referenced by their respective CMU nodes in future patches.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20251013-automatic-clocks-v1-3-72851ee00300@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The commit 6c918709bd30 ("libbpf: Refactor bpf_object__reloc_code")
added the bpf_object__append_subprog_code() with incorrect indentations.
Use tabs instead. (This also makes a consequent commit better readable.)
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20251019202145.3944697-14-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The bpf_insn_successors() function is used to return successors
to a BPF instruction. So far, an instruction could have 0, 1 or 2
successors. Prepare the verifier code to introduction of instructions
with more than 2 successors (namely, indirect jumps).
To do this, introduce a new struct, struct bpf_iarray, containing
an array of bpf instruction indexes and make bpf_insn_successors
to return a pointer of that type. The storage for all instructions
is allocated in the env->succ, which holds an array of size 2,
to be used for all instructions.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251019202145.3944697-10-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The kernel/bpf/array.c file defines the array_map_get_next_key()
function which finds the next key for array maps. It actually doesn't
use any map fields besides the generic max_entries field. Generalize
it, and export as bpf_array_get_next_key() such that it can be
re-used by other array-like maps.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251019202145.3944697-4-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce a new subprog_start field in bpf_prog_aux. This field may
be used by JIT compilers wanting to know the real absolute xlated
offset of the function being jitted. The func_info[func_id] may have
served this purpose, but func_info may be NULL, so JIT compilers
can't rely on it.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251019202145.3944697-3-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In [1] Eduard mentioned that on push_stack failure verifier code
should return -ENOMEM instead of -EFAULT. After checking with the
other call sites I've found that code randomly returns either -ENOMEM
or -EFAULT. This patch unifies the return values for the push_stack
(and similar push_async_cb) functions such that error codes are
always assigned properly.
[1] https://lore.kernel.org/bpf/20250615085943.3871208-1-a.s.protopopov@gmail.com
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251019202145.3944697-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
objects automatically"
Currently in order to implement AlwaysRefCounted for gem objects, we use a
blanket implementation:
unsafe impl<T: IntoGEMObject> AlwaysRefCounted for T { … }
While this technically works, it comes with the rather unfortunate downside
that attempting to create a similar blanket implementation in any other
kernel crate will now fail in a rather confusing way.
Using an example from the (not yet upstream) rust DRM KMS bindings, if we
were to add:
unsafe impl<T: RcModeObject> AlwaysRefCounted for T { … }
Then the moment that both blanket implementations are present in the same
kernel tree, compilation fails with the following:
error[E0119]: conflicting implementations of trait `types::AlwaysRefCounted`
--> rust/kernel/drm/kms.rs:504:1
|
504 | unsafe impl<T: RcModeObject> AlwaysRefCounted for T {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ conflicting implementation
|
::: rust/kernel/drm/gem/mod.rs:97:1
|
97 | unsafe impl<T: IntoGEMObject> AlwaysRefCounted for T {
| ---------------------------------------------------- first implementation here
So, revert these changes for now. The proper fix for this is to introduce a
macro for copy/pasting the same implementation of AlwaysRefCounted around.
This reverts commit 38cb08c3fcd3f3b1d0225dcec8ae50fab5751549.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20251016210955.2813186-2-lyude@redhat.com
|
