| Age | Commit message (Collapse) | Author |
|---|
|
There is no added value in btintel_pcie_msix_isr() compared to
irq_default_primary_handler().
Using a threaded interrupt without a dedicated primary handler mandates
the IRQF_ONESHOT flag to mask the interrupt source while the threaded
handler is active. Otherwise the interrupt can fire again before the
threaded handler had a chance to run.
Use the default primary interrupt handler by specifying NULL and set
IRQF_ONESHOT so the interrupt source is masked until the secondary
handler is done.
Fixes: c2b636b3f788d ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-7-bigeasy@linutronix.de
|
|
There is no added value in dprc_irq0_handler() compared to
irq_default_primary_handler().
Use the default primary interrupt handler by specifying NULL.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260128095540.863589-6-bigeasy@linutronix.de
|
|
request_threaded_irq() is invoked with a primary and a secondary handler
and no flags are passed. The primary handler is the same as
irq_default_primary_handler() so there is no need to have an identical
copy.
The lack of the IRQF_ONESHOT flag can be dangerous because the interrupt
source is not masked while the threaded handler is active. This means,
especially on LEVEL typed interrupt lines, the interrupt can fire again
before the threaded handler had a chance to run.
Use the default primary interrupt handler by specifying NULL and set
IRQF_ONESHOT so the interrupt source is masked until the secondary handler
is done.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-5-bigeasy@linutronix.de
|
|
request_threaded_irq() is invoked with a primary and a secondary handler
and no flags are passed. The primary handler is the same as
irq_default_primary_handler() so there is no need to have an identical
copy.
The lack of the IRQF_ONESHOT can be dangerous because the interrupt
source is not masked while the threaded handler is active. This means,
especially on LEVEL typed interrupt lines, the interrupt can fire again
before the threaded handler had a chance to run.
Use the default primary interrupt handler by specifying NULL and set
IRQF_ONESHOT so the interrupt source is masked until the secondary
handler is done.
Fixes: 72fe00f01f9a3 ("x86/amd-iommu: Use threaded interupt handler")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-4-bigeasy@linutronix.de
|
|
Passing IRQF_ONESHOT ensures that the interrupt source is masked until the
secondary (threaded) handler is done. If only a primary handler is used
then the flag makes no sense because the interrupt cannot fire (again)
while its handler is running.
The flag also prevents force-threading of the primary handler and the
irq-core will warn about this.
The flag was added to match the flag on the shared handler which uses a
threaded handler and therefore IRQF_ONESHOT. This is no longer needed
because devm_request_irq() now passes IRQF_COND_ONESHOT for this case.
Revert adding IRQF_ONESHOT to irqflags.
Fixes: 8f812373d1958 ("platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq()")
Reported-by: Borah, Chaitanya Kumar <chaitanya.kumar.borah@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260128095540.863589-3-bigeasy@linutronix.de
Closes: https://lore.kernel.org/all/555f1c56-0f74-41bf-8bd2-6217e0aab0c6@intel.com
|
|
The flag IRQF_COND_ONESHOT was already force-added to request_irq() because
the ACPI SCI interrupt handler is using the IRQF_ONESHOT flag which breaks
all shared handlers.
devm_request_irq() needs the same change since some users, such as
int0002_vgpio, are using this function instead.
Add IRQF_COND_ONESHOT to the flags passed to devm_request_irq().
Fixes: c37927a203fa2 ("genirq: Set IRQF_COND_ONESHOT in request_irq()")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-2-bigeasy@linutronix.de
|
|
The current cgroup subsystem limit of 16 is insufficient, as the number of
existing subsystems has already reached this limit. When adding a new
subsystem that is not yet in the mainline kernel, building with
`make allmodconfig` requires first bypassing the
`BUILD_BUG_ON(CGROUP_SUBSYS_COUNT > 16)` restriction to allow compilation
to succeed. However, the kernel still fails to boot afterward.
This patch increases the maximum number of supported cgroup subsystems from
16 to 32, providing enough room for future subsystem additions.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: JP Kobryn <inwardvessel@gmail.com>
Acked-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The kernel test robot reports:
drivers/irqchip/irq-aspeed-scu-ic.c:107:27: warning: variable 'mask' set but not used
107 | unsigned int sts, mask;
Remove the leftover.
Fixes: b2a0c13f8b4f ("irqchip/aspeed-scu-ic: Add support for AST2700 SCU interrupt controllers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/874io0h3sz.ffs@tglx
Closes: https://lore.kernel.org/oe-kbuild-all/202602010957.9uuKqUkG-lkp@intel.com/
|
|
variables related to memory alloc/free
Exynos Virtual Display driver performs memory alloc/free operations
without lock protection, which easily causes concurrency problem.
For example, use-after-free can occur in race scenario like this:
```
CPU0 CPU1 CPU2
---- ---- ----
vidi_connection_ioctl()
if (vidi->connection) // true
drm_edid = drm_edid_alloc(); // alloc drm_edid
...
ctx->raw_edid = drm_edid;
...
drm_mode_getconnector()
drm_helper_probe_single_connector_modes()
vidi_get_modes()
if (ctx->raw_edid) // true
drm_edid_dup(ctx->raw_edid);
if (!drm_edid) // false
...
vidi_connection_ioctl()
if (vidi->connection) // false
drm_edid_free(ctx->raw_edid); // free drm_edid
...
drm_edid_alloc(drm_edid->edid)
kmemdup(edid); // UAF!!
...
```
To prevent these vulns, at least in vidi_context, member variables related
to memory alloc/free should be protected with ctx->lock.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
In vidi_connection_ioctl(), vidi->edid(user pointer) is directly
dereferenced in the kernel.
This allows arbitrary kernel memory access from the user space, so instead
of directly accessing the user pointer in the kernel, we should modify it
to copy edid to kernel memory using copy_from_user() and use it.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to
obtain a struct vidi_context pointer. However, drm_dev->dev is the
exynos-drm master device, and the driver_data contained therein is not
the vidi component device, but a completely different device.
This can lead to various bugs, ranging from null pointer dereferences and
garbage value accesses to, in unlucky cases, out-of-bounds errors,
use-after-free errors, and more.
To resolve this issue, we need to store/delete the vidi device pointer in
exynos_drm_private->vidi_dev during bind/unbind, and then read this
exynos_drm_private->vidi_dev within ioctl() to obtain the correct
struct vidi_context pointer.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
MAINTAINERS entries are organized by subsystem ownership, and the RDMA
files belong under drivers/infiniband. Remove the overly broad mana_ib
entries from the Hyper-V section, and instead add the Hyper-V mailing list
to CC on mana_ib patches.
This makes get_maintainer.pl behave more sensibly when running it on
mana_ib patches.
Fixes: 428ca2d4c6aa ("MAINTAINERS: Add Long Li as a Hyper-V maintainer")
Link: https://patch.msgid.link/20260128-get-maintainers-fix-v1-1-fc5e58ce9f02@nvidia.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Simplify the error path by directly returning PTR_ERR(tcc_cdev)
instead of storing it in an intermediate variable ret which can be
dropped then because it is only used for that.
Also remove an uneeded empty line before the declaration of local
variable err.
Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
[ rjw: Dropped unneeded changes, rewrote changelog, adjusted subject ]
Link: https://patch.msgid.link/20260131151615.6230-1-sumeet4linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On some laptops, such as the Huawei Matebook series, the embedded
controller continues to report "Charging" status even when the
charge threshold is reached and no current is being drawn.
This incorrect reporting prevents the system from switching to battery
power profiles, leading to significantly higher power (e.g., 18W instead
of 7W during browsing) and missed remaining battery time estimation.
Validate the "Charging" state by checking if rate_now is zero. If the
hardware reports charging but the current is zero, report "Not Charging"
to user space.
Signed-off-by: Ata İlhan Köktürk <atailhan2006@gmail.com>
[ rjw: Whitespace fix, braces added to an inner if (), new comment rewrite ]
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20260129144856.43058-1-atailhan2006@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since wqe_size in ib_uverbs_unmarshall_recv() is user-provided and already
validated, but can still be large, add __GFP_NOWARN to suppress memory
allocation warnings for large sizes, consistent with the similar fix in
ib_uverbs_post_send().
Fixes: 67cdb40ca444 ("[IB] uverbs: Implement more commands")
Signed-off-by: Yi Liu <liuy22@mails.tsinghua.edu.cn>
Link: https://patch.msgid.link/20260129094900.3517706-1-liuy22@mails.tsinghua.edu.cn
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
To allow transitioning away from gpio-keys platform data attempt to
retrieve IRQ for interrupt-only keys using platform_get_irq_optional()
if interrupt is not specified in platform data.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
kho_reserve_scratch() iterates over all online NUMA nodes to allocate
per-node scratch memory. On systems with memoryless NUMA nodes (nodes
that have CPUs but no memory), memblock_alloc_range_nid() fails because
there is no memory available on that node. This causes KHO initialization
to fail and kho_enable to be set to false.
Some ARM64 systems have NUMA topologies where certain nodes contain only
CPUs without any associated memory. These configurations are valid and
should not prevent KHO from functioning.
Fix this by only counting nodes that have memory (N_MEMORY state) and skip
memoryless nodes in the per-node scratch allocation loop.
Link: https://lkml.kernel.org/r/20260120175913.34368-1-epetron@amazon.de
Fixes: 3dc92c311498 ("kexec: add Kexec HandOver (KHO) generation helpers").
Signed-off-by: Evangelos Petrongonas <epetron@amazon.de>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
crash_load_dm_crypt_keys() reads dm-crypt volume keys from the user
keyring. It uses user_key_payload_locked() without holding key->sem,
which makes lockdep complain when kexec_file_load() assembles the crash
image:
=============================
WARNING: suspicious RCU usage
-----------------------------
./include/keys/user-type.h:53 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by kexec/4875.
stack backtrace:
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
lockdep_rcu_suspicious.cold+0x4e/0x96
crash_load_dm_crypt_keys+0x314/0x390
bzImage64_load+0x116/0x9a0
? __lock_acquire+0x464/0x1ba0
__do_sys_kexec_file_load+0x26a/0x4f0
do_syscall_64+0xbd/0x430
entry_SYSCALL_64_after_hwframe+0x77/0x7f
In addition, the key returned by request_key() is never key_put()'d,
leaking a key reference on each load attempt.
Take key->sem while copying the payload and drop the key reference
afterwards.
Link: https://lkml.kernel.org/r/patch.git-2d4d76083a5c.your-ad-here.call-01769426386-ext-2560@work.hours
Fixes: 479e58549b0f ("crash_dump: store dm crypt keys in kdump reserved memory")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
* use dedicated labels for error handling instead of checking if a pointer
is not null to decide if it should be unmapped
* drop assignment of values to err that are only used to print a numeric
error code, there are pr_warn()s for each failure already so printing a
numeric error code in the next line does not add anything useful
Link: https://lkml.kernel.org/r/20260122121757.575987-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The user.* sysctls implement the ctl_table_root::permissions hook and they
override the file access mode based on the CAP_SYS_RESOURCE capability (at
most rwx if capable, at most r-- if not). The capability is being checked
unconditionally, so if an LSM denies the capability, an audit record may
be logged even when access is in fact granted.
Given the logic in the set_permissions() function in kernel/ucount.c and
the unfortunate way the permission checking is implemented, it doesn't
seem viable to avoid false positive denials by deferring the capability
check. Thus, do the same as in net_ctl_permissions() (net/sysctl_net.c) -
switch from ns_capable() to ns_capable_noaudit(), so that the check never
logs an audit record.
Link: https://lkml.kernel.org/r/20260122140745.239428-1-omosnace@redhat.com
Fixes: dbec28460a89 ("userns: Add per user namespace sysctls.")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The IPC sysctls implement the ctl_table_root::permissions hook and they
override the file access mode based on the CAP_CHECKPOINT_RESTORE
capability, which is being checked regardless of whether any access is
actually denied or not, so if an LSM denies the capability, an audit
record may be logged even when access is in fact granted.
It wouldn't be viable to restructure the sysctl permission logic to only
check the capability when the access would be actually denied if it's not
granted. Thus, do the same as in net_ctl_permissions() (net/sysctl_net.c)
- switch from ns_capable() to ns_capable_noaudit(), so that the check
never emits an audit record.
Link: https://lkml.kernel.org/r/20260122141303.241133-1-omosnace@redhat.com
Fixes: 0889f44e2810 ("ipc: Check permissions for checkpoint_restart sysctls at open time")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Alexey Gladkov <legion@kernel.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kexec_load_purgatory() derives image->start by locating e_entry inside an
SHF_EXECINSTR section. If the purgatory object contains multiple
executable sections with overlapping sh_addr, the entrypoint check can
match more than once and trigger a WARN.
Derive the entry section from the purgatory_start symbol when present and
compute image->start from its final placement. Keep the existing e_entry
fallback for purgatories that do not expose the symbol.
WARNING: kernel/kexec_file.c:1009 at kexec_load_purgatory+0x395/0x3c0, CPU#10: kexec/1784
Call Trace:
<TASK>
bzImage64_load+0x133/0xa00
__do_sys_kexec_file_load+0x2b3/0x5c0
do_syscall_64+0x81/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[me@linux.beauty: move helper to avoid forward declaration, per Baoquan]
Link: https://lkml.kernel.org/r/20260128043511.316860-1-me@linux.beauty
Link: https://lkml.kernel.org/r/20260120124005.148381-1-me@linux.beauty
Fixes: 8652d44f466a ("kexec: support purgatories with .text.hot sections")
Signed-off-by: Li Chen <me@linux.beauty>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Li Chen <me@linux.beauty>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ricardo Ribalda Delgado <ribalda@chromium.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit c06c303832ec ("ocfs2: fix xattr array entry __counted_by error")
doesn't handle all cases and the cleanup job for preserved xattr entries
still has bug:
- the 'last' pointer should be shifted by one unit after cleanup
an array entry.
- current code logic doesn't cleanup the first entry when xh_count is 1.
Note, commit c06c303832ec is also a bug fix for 0fe9b66c65f3.
Link: https://lkml.kernel.org/r/20251210015725.8409-2-heming.zhao@suse.com
Fixes: 0fe9b66c65f3 ("ocfs2: Add preserve to reflink.")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When idtab allocation fails, net is not registered with rio_add_net() yet,
so kfree(net) is sufficient to release the memory. Set mport->net to NULL
to avoid dangling pointer.
Link: https://lkml.kernel.org/r/20260121013508.195836-1-lihaoxiang@isrc.iscas.ac.cn
Fixes: e6b585ca6e81 ("rapidio: move net allocation into core code")
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Problem
=======
Commit 658eb5ab916d ("delayacct: add delay max to record delay peak")
introduced the delay max for getdelays, which records abnormal latency
peaks and helps us understand the magnitude of such delays. However, the
peak latency value alone is insufficient for effective root cause
analysis. Without the precise timestamp of when the peak occurred, we
still lack the critical context needed to correlate it with other system
events.
Solution
========
To address this, we need to additionally record a precise timestamp when
the maximum latency occurs. By correlating this timestamp with system
logs and monitoring metrics, we can identify processes with abnormal
resource usage at the same moment, which can help us to pinpoint root
causes.
Use Case
========
bash-4.4# ./getdelays -d -t 227
print delayacct stats ON
TGID 227
CPU count real total virtual total delay total delay average delay max delay min delay max timestamp
46 188000000 192348334 4098012 0.089ms 0.429260ms 0.051205ms 2026-01-15T15:06:58
IO count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
SWAP count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
RECLAIM count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
THRAS HING count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
COMPACT count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
WPCOPY count delay total delay average delay max delay min delay max timestamp
182 19413338 0.107ms 0.547353ms 0.022462ms 2026-01-15T15:05:24
IRQ count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
Link: https://lkml.kernel.org/r/20260119100241520gWubW8-5QfhSf9gjqcc_E@zte.com.cn
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__noinstr_text_start is adding noise to the script, ignore it.
For instance using __always_inline on __skb_incr_checksum_unnecessary and
CC=clang build.
Before this patch, __noinstr_text_start can show up and confuse us.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 3/0 up/down: 212/-206 (6)
Function old new delta
tcp6_gro_complete 208 283 +75
tcp4_gro_complete 376 449 +73
__noinstr_text_start 3536 3600 +64
__pfx___skb_incr_checksum_unnecessary 32 - -32
__skb_incr_checksum_unnecessary 174 - -174
Total: Before=25509464, After=25509470, chg +0.00%
After this patch we have a more precise result.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 2/0 up/down: 148/-206 (-58)
Function old new delta
tcp6_gro_complete 208 283 +75
tcp4_gro_complete 376 449 +73
__pfx___skb_incr_checksum_unnecessary 32 - -32
__skb_incr_checksum_unnecessary 174 - -174
Total: Before=25505928, After=25505870, chg -0.00%
Link: https://lkml.kernel.org/r/20260117083448.3877418-1-edumazet@google.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Tracing is a half of the kernel.h in terms of LOCs, although it's a
self-consistent part. It is intended for quick debugging purposes and
isn't used by the normal tracing utilities.
Move it to a separate header. If someone needs to just throw a
trace_printk() in their driver, they will not have to pull all the heavy
tracing machinery.
This is a pure move.
Link: https://lkml.kernel.org/r/20260116042510.241009-7-ynorov@nvidia.com
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The __trace_puts() function takes a string pointer and the size of the
string itself. All users currently simply pass in the strlen() of the
string it is also passing in. There's no reason to pass in the size.
Instead have the __trace_puts() function do the strlen() within the
function itself.
This fixes a header recursion issue where using strlen() in the macro
calling __trace_puts() requires adding #include <linux/string.h> in order
to use strlen(). Removing the use of strlen() from the header fixes the
recursion issue.
Link: https://lore.kernel.org/all/aUN8Hm377C5A0ILX@yury/
Link: https://lkml.kernel.org/r/20260116042510.241009-6-ynorov@nvidia.com
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In preparation for decoupling linux/instruction_pointer.h and
linux/kernel.h, include instruction_pointer.h explicitly where needed.
Link: https://lkml.kernel.org/r/20260116042510.241009-5-ynorov@nvidia.com
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The macro is related to sysfs, but is defined in kernel.h. Move it to the
proper header, and unload the generic kernel.h.
Now that the macro is removed from kernel.h, linux/moduleparam.h is
decoupled, and kernel.h inclusion can be removed.
Link: https://lkml.kernel.org/r/20260116042510.241009-4-ynorov@nvidia.com
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The following patch drops moduleparam.h dependency on kernel.h. In
preparation to it, list all the required headers explicitly.
Link: https://lkml.kernel.org/r/20260116042510.241009-3-ynorov@nvidia.com
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Suggested-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Unload linux/kernel.h", v5.
kernel.h hosts declarations that can be placed better. This series
decouples kernel.h with some explicit and implicit dependencies; also,
moves tracing functionality to a new independent header.
This patch (of 6):
The macro was introduced in 1994, v1.0.4, for stacks protection. Since
that, people found better ways to protect stacks, and now the macro is
only used by i915 selftests. Move it to a local header and drop from the
kernel.h.
Link: https://lkml.kernel.org/r/20260116042510.241009-1-ynorov@nvidia.com
Link: https://lkml.kernel.org/r/20260116042510.241009-2-ynorov@nvidia.com
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When building the kernel using a version of LLVM between llvmorg-19-init
(the first commit of the LLVM 19 development cycle) and the change in
LLVM that actually added __typeof_unqual__ for all C modes [1], which
might happen during a bisect of LLVM, there is a build failure:
In file included from arch/x86/kernel/asm-offsets.c:9:
In file included from include/linux/crypto.h:15:
In file included from include/linux/completion.h:12:
In file included from include/linux/swait.h:7:
In file included from include/linux/spinlock.h:56:
In file included from include/linux/preempt.h:79:
arch/x86/include/asm/preempt.h:61:2: error: call to undeclared function '__typeof_unqual__'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
61 | raw_cpu_and_4(__preempt_count, ~PREEMPT_NEED_RESCHED);
| ^
arch/x86/include/asm/percpu.h:478:36: note: expanded from macro 'raw_cpu_and_4'
478 | #define raw_cpu_and_4(pcp, val) percpu_binary_op(4, , "and", (pcp), val)
| ^
arch/x86/include/asm/percpu.h:210:3: note: expanded from macro 'percpu_binary_op'
210 | TYPEOF_UNQUAL(_var) pto_tmp__; \
| ^
include/linux/compiler.h:248:29: note: expanded from macro 'TYPEOF_UNQUAL'
248 | # define TYPEOF_UNQUAL(exp) __typeof_unqual__(exp)
| ^
The current logic of CC_HAS_TYPEOF_UNQUAL just checks for a major
version of 19 but half of the 19 development cycle did not have support
for __typeof_unqual__.
Harden the logic of CC_HAS_TYPEOF_UNQUAL to avoid this error by only
using __typeof_unqual__ with a released version of LLVM 19, which is
greater than or equal to 19.1.0 with LLVM's versioning scheme that
matches GCC's [2].
Link: https://github.com/llvm/llvm-project/commit/cc308f60d41744b5920ec2e2e5b25e1273c8704b [1]
Link: https://github.com/llvm/llvm-project/commit/4532617ae420056bf32f6403dde07fb99d276a49 [2]
Link: https://lkml.kernel.org/r/20260116-require-llvm-19-1-for-typeof_unqual-v1-1-3b9a4a4b212b@kernel.org
Fixes: ac053946f5c4 ("compiler.h: introduce TYPEOF_UNQUAL() macro")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When restoring a page (from kho_restore_pages()) or folio (from
kho_restore_folio()), KHO must initialize the struct page. The
initialization differs slightly depending on if a folio is requested or a
set of 0-order pages is requested.
Conceptually, it is quite simple to understand. When restoring 0-order
pages, each page gets a refcount of 1 and that's it. When restoring a
folio, head page gets a refcount of 1 and tail pages get 0.
kho_restore_page() tries to combine the two separate initialization flow
into one piece of code. While it works fine, it is more complicated to
read than it needs to be. Make the code simpler by splitting the two
initalization paths into two separate functions. This improves
readability by clearly showing how each type must be initialized.
Link: https://lkml.kernel.org/r/20260116112217.915803-3-pratyush@kernel.org
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "kho: clean up page initialization logic", v2.
This series simplifies the page initialization logic in
kho_restore_page(). It was originally only a single patch [0], but on
Pasha's suggestion, I added another patch to use unsigned long for
nr_pages.
Technically speaking, the patches aren't related and can be applied
independently, but bundling them together since patch 2 relies on 1 and it
is easier to manage them this way.
This patch (of 2):
With 4k pages, a 32-bit nr_pages can span up to 16 TiB. While it is a
lot, there exist systems with terabytes of RAM. gup is also moving to
using long for nr_pages. Use unsigned long and make KHO future-proof.
Link: https://lkml.kernel.org/r/20260116112217.915803-1-pratyush@kernel.org
Link: https://lkml.kernel.org/r/20260116112217.915803-2-pratyush@kernel.org
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Suggested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some versions of tools that apply patches incorrectly allow lines that
start with 3 dashes and have additional content on the same line.
Checkpatch will now emit an ERROR on these lines and optionally convert
those lines from dashes to equals with --fix.
Link: https://lkml.kernel.org/r/6ec1ed08328340db42655287afd5fa4067316b11.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Ian Rogers <irogers@google.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Namhyung kim <namhyung@kernel.org>
Cc: Stehen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
required to merge "kho: use unsigned long for nr_pages".
|
|
There are now only two users of _swap_info_get after consolidating these
callers, folio_free_swap and swp_swapcount.
folio_free_swap already holds the folio lock, and the folio must be in the
swap cache, _swap_info_get is redundant.
For swp_swapcount, it should use get_swap_device instead. get_swap_device
increases the device ref count, which is actually a bit safer. The only
current use is smap walking, and the performance change here is tiny.
And after these changes, _swap_info_get is no longer used, so we can
safely remove it.
Link: https://lkml.kernel.org/r/20251220-swap-table-p2-v5-19-8862a265a033@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now, the swap cache is managed by the swap table. All swap cache users
are checking the swap table directly to check the swap cache state.
SWAP_HAS_CACHE is now just a temporary pin before the first increase from
0 to 1 of a slot's swap count (swap_dup_entries) after swap allocation
(folio_alloc_swap), or before the final free of slots pinned by folio in
swap cache (put_swap_folio).
Drop these two usages. For the first dup, SWAP_HAS_CACHE pinning was hard
to kill because it used to have multiple meanings, more than just "a slot
is cached". We have just simplified that and defined that the first dup
is always done with folio locked in swap cache (folio_dup_swap), so stop
checking the SWAP_HAS_CACHE bit and just check the swap cache (swap table)
directly, and add a WARN if a swap entry's count is being increased for
the first time while the folio is not in swap cache.
As for freeing, just let the swap cache free all swap entries of a folio
that have a swap count of zero directly upon folio removal. We have also
just cleaned up batch freeing to check the swap cache usage using the swap
table: a slot with swap cache in the swap table will not be freed until
its cache is gone, and no SWAP_HAS_CACHE bit is involved anymore. And
besides, the removal of a folio and freeing of the slots are being done in
the same critical section now, which should improve the performance.
After these two changes, SWAP_HAS_CACHE no longer has any users. Swap
cache synchronization is also done by the swap table directly, so using
SWAP_HAS_CACHE to pin a slot before adding the cache is also no longer
needed. Remove all related logic and helpers. swap_map is now only used
for tracking the count, so all swap_map users can just read it directly,
ignoring the swap_count helper, which was previously used to filter out
the SWAP_HAS_CACHE bit.
The idea of dropping SWAP_HAS_CACHE and using the swap table directly was
initially from Chris's idea of merging all the metadata usage of all swaps
into one place.
Link: https://lkml.kernel.org/r/20251220-swap-table-p2-v5-18-8862a265a033@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are a few problems with the current freeing of swap entries.
When freeing a set of swap entries directly (swap_put_entries_direct,
typically from zapping the page table), it scans the whole swap region
multiple times. First, it scans the whole region to check if it can be
batch freed and if there is any cached folio. Then do a batch free only
if the whole region's swap count equals 1. And if any entry is cached,
even if only one, it will have to walk the whole region again to clean up
the cache.
And if any entry is not in a consistent status with other entries, it will
fall back to order 0 freeing. For example, if only one of them is cached,
the batch free will fall back.
And the current batch freeing workflow relies on the swap map's
SWAP_HAS_CACHE bit for both continuous checking and batch freeing, which
isn't compatible with the swap table design.
Tidy this up, introduce a new cluster scoped helper for all swap entry
freeing job. It will batch frees all continuous entries, and just start a
new batch if any inconsistent entry is found. This may improve the batch
size when the clusters are fragmented. This should also be more robust
with more sanity checks, and make it clear that a slot pinned by swap
cache will be cleared upon cache reclaim.
And the cache reclaim scan is also now limited to each cluster. If a
cluster has any clean swap cache left after putting the swap count,
reclaim the cluster only instead of the whole region.
And since a folio's entries are always in the same cluster, putting swap
entries from a folio can also use the new helper directly.
This should be both an optimization and a cleanup, and the new helper is
adapted to the swap table.
Link: https://lkml.kernel.org/r/20251220-swap-table-p2-v5-17-8862a265a033@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of looking at the swap map, check swap table directly to tell if a
swap slot is cached. Prepares for the removal of SWAP_HAS_CACHE.
Link: https://lkml.kernel.org/r/20251220-swap-table-p2-v5-16-8862a265a033@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The allocator uses SWAP_HAS_CACHE to pin a swap slot upon allocation.
SWAP_HAS_CACHE is being deprecated as it caused a lot of confusion. This
pinning usage here can be dropped by adding the folio to swap cache
directly on allocation.
All swap allocations are folio-based now (except for hibernation), so the
swap allocator can always take the folio as the parameter. And now both
swap cache (swap table) and swap map are protected by the cluster lock,
scanning the map and inserting the folio can be done in the same critical
section. This eliminates the time window that a slot is pinned by
SWAP_HAS_CACHE, but it has no cache, and avoids touching the lock multiple
times.
This is both a cleanup and an optimization.
Link: https://lkml.kernel.org/r/20251220-swap-table-p2-v5-15-8862a265a033@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current swap entry allocation/freeing workflow has never had a clear
definition. This makes it hard to debug or add new optimizations.
This commit introduces a proper definition of how swap entries would be
allocated and freed. Now, most operations are folio based, so they will
never exceed one swap cluster, and we now have a cleaner border between
swap and the rest of mm, making it much easier to follow and debug,
especially with new added sanity checks. Also making more optimization
possible.
Swap entry will be mostly freed and free with a folio bound. The folio
lock will be useful for resolving many swap related races.
Now swap allocation (except hibernation) always starts with a folio in the
swap cache, and gets duped/freed protected by the folio lock:
- folio_alloc_swap() - The only allocation entry point now.
Context: The folio must be locked.
This allocates one or a set of continuous swap slots for a folio and
binds them to the folio by adding the folio to the swap cache. The
swap slots' swap count start with zero value.
- folio_dup_swap() - Increase the swap count of one or more entries.
Context: The folio must be locked and in the swap cache. For now, the
caller still has to lock the new swap entry owner (e.g., PTL).
This increases the ref count of swap entries allocated to a folio.
Newly allocated swap slots' count has to be increased by this helper
as the folio got unmapped (and swap entries got installed).
- folio_put_swap() - Decrease the swap count of one or more entries.
Context: The folio must be locked and in the swap cache. For now, the
caller still has to lock the new swap entry owner (e.g., PTL).
This decreases the ref count of swap entries allocated to a folio.
Typically, swapin will decrease the swap count as the folio got
installed back and the swap entry got uninstalled
This won't remove the folio from the swap cache and free the
slot. Lazy freeing of swap cache is helpful for reducing IO.
There is already a folio_free_swap() for immediate cache reclaim.
This part could be further optimized later.
The above locking constraints could be further relaxed when the swap table
is fully implemented. Currently dup still needs the caller to lock the
swap entry container (e.g. PTL), or a concurrent zap may underflow the
swap count.
Some swap users need to interact with swap count without involving folio
(e.g. forking/zapping the page table or mapping truncate without swapin).
In such cases, the caller has to ensure there is no race condition on
whatever owns the swap count and use the below helpers:
- swap_put_entries_direct() - Decrease the swap count directly.
Context: The caller must lock whatever is referencing the slots to
avoid a race.
Typically the page table zapping or shmem mapping truncate will need
to free swap slots directly. If a slot is cached (has a folio bound),
this will also try to release the swap cache.
- swap_dup_entry_direct() - Increase the swap count directly.
Context: The caller must lock whatever is referencing the entries to
avoid race, and the entries must already have a swap count > 1.
Typically, forking will need to copy the page table and hence needs to
increase the swap count of the entries in the table. The page table is
locked while referencing the swap entries, so the entries all have a
swap count > 1 and can't be freed.
Hibernation subsystem is a bit different, so two special wrappers are here:
- swap_alloc_hibernation_slot() - Allocate one entry from one device.
- swap_free_hibernation_slot() - Free one entry allocated by the above
helper.
All hibernation entries are exclusive to the hibernation subsystem and
should not interact with ordinary swap routines.
By separating the workflows, it will be possible to bind folio more
tightly with swap cache and get rid of the SWAP_HAS_CACHE as a temporary
pin.
This commit should not introduce any behavior change
[kasong@tencent.com: fix leak, per Chris Mason. Remove WARN_ON, per Lai Yi]
Link: https://lkml.kernel.org/r/CAMgjq7AUz10uETVm8ozDWcB3XohkOqf0i33KGrAquvEVvfp5cg@mail.gmail.com
[ryncsn@gmail.com: fix KSM copy pages for swapoff, per Chris]
Link: https://lkml.kernel.org/r/aXxkANcET3l2Xu6J@KASONG-MC4
Link: https://lkml.kernel.org/r/20251220-swap-table-p2-v5-14-8862a265a033@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Kairui Song <ryncsn@gmail.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Chris Mason <clm@fb.com>
Cc: Chris Mason <clm@meta.com>
Cc: Lai Yi <yi1.lai@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove the "skip if exists" check from commit a65b0e7607ccb ("zswap: make
shrinking memcg-aware"). It was needed because there is a tiny time
window between setting the SWAP_HAS_CACHE bit and actually adding the
folio to the swap cache. If a user is trying to add the folio into the
swap cache but another user was interrupted after setting SWAP_HAS_CACHE
but hasn't added the folio to the swap cache yet, it might lead to a
deadlock.
We have moved the bit setting to the same critical section as adding the
folio, so this is no longer needed. Remove it and clean it up.
Link: https://lkml.kernel.org/r/20251220-swap-table-p2-v5-13-8862a265a033@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Current swap in synchronization mostly uses the swap_map's SWAP_HAS_CACHE
bit. Whoever sets the bit first does the actual work to swap in a folio.
This has been causing many issues as it's just a poor implementation of a
bit lock. Raced users have no idea what is pinning a slot, so it has to
loop with a schedule_timeout_uninterruptible(1), which is ugly and causes
long-tailing or other performance issues. Besides, the abuse of
SWAP_HAS_CACHE has been causing many other troubles for synchronization or
maintenance.
This is the first step to remove this bit completely.
Now all swap in paths are using the swap cache, and both the swap cache
and swap map are protected by the cluster lock. So we can just resolve
the swap synchronization with the swap cache layer directly using the
cluster lock and folio lock. Whoever inserts a folio in the swap cache
first does the swap in work. And because folios are locked during swap
operations, other raced swap operations will just wait on the folio lock.
The SWAP_HAS_CACHE will be removed in later commit. For now, we still set
it for some remaining users. But now we do the bit setting and swap cache
folio adding in the same critical section, after swap cache is ready. No
one will have to spin on the SWAP_HAS_CACHE bit anymore.
This both simplifies the logic and should improve the performance,
eliminating issues like the one solved in commit 01626a1823024 ("mm: avoid
unconditional one-tick sleep when swapcache_prepare fails"), or the
"skip_if_exists" from commit a65b0e7607ccb ("zswap: make shrinking
memcg-aware"), which will be removed very soon.
[kasong@tencent.com: fix cgroup v1 accounting issue]
Link: https://lkml.kernel.org/r/CAMgjq7CGUnzOVG7uSaYjzw9wD7w2dSKOHprJfaEp4CcGLgE3iw@mail.gmail.com
Link: https://lkml.kernel.org/r/20251220-swap-table-p2-v5-12-8862a265a033@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
No feature change, split the common logic into a stand alone helper to be
reused later.
Link: https://lkml.kernel.org/r/20251220-swap-table-p2-v5-11-8862a265a033@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Swap cluster cache reclaim requires releasing the lock, so the cluster may
become unusable after the reclaim. To prepare for checking swap cache
using the swap table directly, consolidate the swap cluster reclaim and
the check logic.
We will want to avoid touching the cluster's data completely with the swap
table, to avoid RCU overhead here. And by moving the cluster usable check
into the reclaim helper, it will also help avoid a redundant scan of the
slots if the cluster is no longer usable, and we will want to avoid
touching the cluster.
Also, adjust it very slightly while at it: always scan the whole region
during reclaim, don't skip slots covered by a reclaimed folio. Because
the reclaim is lockless, it's possible that new cache lands at any time.
And for allocation, we want all caches to be reclaimed to avoid
fragmentation. Besides, if the scan offset is not aligned with the size
of the reclaimed folio, we might skip some existing cache and fail the
reclaim unexpectedly.
There should be no observable behavior change. It might slightly improve
the fragmentation issue or performance.
Link: https://lkml.kernel.org/r/20251220-swap-table-p2-v5-10-8862a265a033@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When checking if a swap entry is swapped out, we simply check if the
bitwise result of the count value is larger than 0. But SWAP_MAP_BAD will
also be considered as a swao count value larger than 0.
SWAP_MAP_BAD being considered as a count value larger than 0 is useful for
the swap allocator: they will be seen as a used slot, so the allocator
will skip them. But for the swapped out check, this isn't correct.
There is currently no observable issue. The swapped out check is only
useful for readahead and folio swapped-out status check. For readahead,
the swap cache layer will abort upon checking and updating the swap map.
For the folio swapped out status check, the swap allocator will never
allocate an entry of bad slots to folio, so that part is fine too. The
worst that could happen now is redundant allocation/freeing of folios and
waste CPU time.
This also makes it easier to get rid of swap map checking and update
during folio insertion in the swap cache layer.
Link: https://lkml.kernel.org/r/20251220-swap-table-p2-v5-9-8862a265a033@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The SWAP_MAP_SHMEM state was introduced in the commit aaa468653b4a
("swap_info: note SWAP_MAP_SHMEM"), to quickly determine if a swap entry
belongs to shmem during swapoff.
However, swapoff has since been rewritten in the commit b56a2d8af914 ("mm:
rid swapoff of quadratic complexity"). Now having swap count ==
SWAP_MAP_SHMEM value is basically the same as having swap count == 1, and
swap_shmem_alloc() behaves analogously to swap_duplicate(). The only
difference of note is that swap_shmem_alloc() does not check for -ENOMEM
returned from __swap_duplicate(), but it is OK because shmem never
re-duplicates any swap entry it owns. This will stil be safe if we use
(batched) swap_duplicate() instead.
This commit adds swap_duplicate_nr(), the batched variant of
swap_duplicate(), and removes the SWAP_MAP_SHMEM state and the associated
swap_shmem_alloc() helper to simplify the state machine (both mentally and
in terms of actual code). We will also have an extra state/special value
that can be repurposed (for swap entries that never gets re-duplicated).
Link: https://lkml.kernel.org/r/20251220-swap-table-p2-v5-8-8862a265a033@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <ryncsn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now the overhead of the swap cache is trivial to none, bypassing the swap
cache is no longer a good optimization.
We have removed the cache bypass swapin for anon memory, now do the same
for shmem. Many helpers and functions can be dropped now.
The performance may slightly drop because of the co-existence and double
update of swap_map and swap table, and this problem will be improved very
soon in later commits by dropping the swap_map update partially:
Swapin of 24 GB file with tmpfs with
transparent_hugepage_tmpfs=within_size and ZRAM, 3 test runs on my
machine:
Before: After this commit: After this series:
5.99s 6.29s 6.08s
And later swap table phases will drop the swap_map completely to avoid
overhead and reduce memory usage.
Link: https://lkml.kernel.org/r/20251219195751.61328-1-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
