| Age | Commit message (Collapse) | Author |
|---|
|
Add labels to the Baltos LED nodes.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Link: https://lore.kernel.org/r/20251006093517.3075431-1-yegorslists@googlemail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Without a serial console speed specified in chosen/stdout-path in the
DTB, the serial console uses the default speed of the serial driver,
unless explicitly overridden in a legacy console= kernel command-line
parameter.
After dropping "ti,omap3-uart" from the list of compatible values in DT,
AM33xx serial ports can no longer be used with the legacy OMAP serial
driver, but only with the OMAP-flavored 8250 serial driver (which is
mutually-exclusive with the former). However, replacing
CONFIG_SERIAL_OMAP=y by CONFIG_SERIAL_8250_OMAP=y (with/without enabling
CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP) may not be sufficient to restore
serial console functionality: the legacy OMAP serial driver defaults to
115200 bps, while the 8250 serial driver defaults to 9600 bps, causing
no visible output on the serial console when no appropriate console=
kernel command-line parameter is specified.
Fix this for all AM33xx boards by adding ":115200n8" to
chosen/stdout-path. This requires replacing the "&uartN" reference by
the corresponding "serialN" DT alias.
Fixes: ca8be8fc2c306efb ("ARM: dts: am33xx-l4: fix UART compatible")
Fixes: 077e1cde78c3f904 ("ARM: omap2plus_defconfig: Enable 8250_OMAP")
Closes: https://lore.kernel.org/CAMuHMdUb7Jb2=GqK3=Rn+Gv5G9KogcQieqDvjDCkJA4zyX4VcA@mail.gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/63cef5c3643d359e8ec13366ca79377f12dd73b1.1759398641.git.geert+renesas@glider.be
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Luxul XAP-1440 has BCM54210E PHY at address 25.
Fixes: 44ad82078069 ("ARM: dts: BCM53573: Fix Ethernet info for Luxul devices")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20251002194852.13929-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
The commit 4adc20ba95d4 ("ARM: dts: broadcom: rpi: Switch to V3D firmware
clock") causes a regression in arm64 developer setups, which stores the
kernel modules via NFS. Before this change the involved V3D clock provider
was builtin, but after this DT change the clk-raspberrypi is responsible
for V3D and for arm64/defconfig this driver is build as a kernel module.
In case these kernel modules are provided via NFS this takes too long and
the PM domain core give up before the clock driver could be loaded:
v3d fec00000.gpu: deferred probe timeout, ignoring dependency
So resolve this issue by making this critical driver builtin.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/linux-arm-kernel/9ebda74e-e700-4fbe-bca5-382f92417a9c@sirena.org.uk/
Fixes: 4adc20ba95d4 ("ARM: dts: broadcom: rpi: Switch to V3D firmware clock")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20251104174518.11783-1-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Quotation marks in cpufeatures.h comments are special and when the
comment begins with a quoted string, that string lands in /proc/cpuinfo,
turning it into a user-visible one.
The LKGS comment doesn't begin with a quoted string but just in case
drop the quoted "kernel" in there to avoid confusion. And while at it,
simply change the description into what the LKGS instruction does for
more clarity.
No functional changes.
Reviewed-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20251015103548.10194-1-bp@kernel.org
|
|
Fix refcount leak in `smb2_set_path_attr` when path conversion fails.
Function `cifs_get_writable_path` returns `cfile` with its reference
counter `cfile->count` increased on success. Function `smb2_compound_op`
would decrease the reference counter for `cfile`, as stated in its
comment. By calling `smb2_rename_path`, the reference counter of `cfile`
would leak if `cifs_convert_path_to_utf16` fails in `smb2_set_path_attr`.
Fixes: 8de9e86c67ba ("cifs: create a helper to find a writeable handle by path name")
Acked-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
- Use memset() in scx_task_iter_start() instead of zeroing fields individually.
- In scx_task_iter_next(), move __scx_task_iter_maybe_relock() after the batch
check which is simpler.
- Update comment to reflect that tasks are removed from scx_tasks when dead
(commit 7900aa699c34 ("sched_ext: Fix cgroup exit ordering by moving
sched_ext_free() to finish_task_switch()")).
No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The BUILD_BUG_ON() which checks that __SCX_DSQ_ITER_ALL_FLAGS doesn't
overlap with the private lnode bits was in scx_task_iter_start() which has
nothing to do with DSQ iteration. Move it to bpf_iter_scx_dsq_new() where it
belongs.
No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Alan Maguire says:
====================
Multi-split BTF fixes and test
This small series consists of a fix to multi-split BTF parsing
(patch 1) and a test which exercises (multi-)split BTF parsing
(patch 2).
Changes since v3 [1]
- add asserts to ensure number of types in original and parsed
BTF are identical, and the calls to btf__type_by_id() return
valid pointers (code review bot, patch 2)
Changes since v2 [2]
- fix Fixes: tag formatting (Andrii, patch 1)
- BPF code-review bot saw we were doing ASSERT_OK_PTR() on wrong
BTF (not multisplit) in patch 2
- ensure cleanup is correctly handled for BTF, unlink in split
tests (Andrii, patch 2)
Changes since v1 [3]
- BPF code-review bot spotted another place that the string offset
needed to be adjusted based upon base start string offset + header
string offset.
- added selftests to extend split BTF testing to parsing
[1] https://lore.kernel.org/bpf/20251028225544.1312356-1-alan.maguire@oracle.com/
[2] https://lore.kernel.org/bpf/20251028155709.1265445-1-alan.maguire@oracle.com/
[3] https://lore.kernel.org/bpf/20251023142812.258870-1-alan.maguire@oracle.com/
====================
Link: https://patch.msgid.link/20251104203309.318429-1-alan.maguire@oracle.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Write raw BTF to files, parse it and compare to original;
this allows us to test parsing of (multi-)split BTF code.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251104203309.318429-3-alan.maguire@oracle.com
|
|
When creating multi-split BTF we correctly set the start string offset
to be the size of the base string section plus the base BTF start
string offset; the latter is needed for multi-split BTF since the
offset is non-zero there.
Unfortunately the BTF parsing case needed that logic and it was
missed.
Fixes: 4e29128a9ace ("libbpf/btf: Fix string handling to support multi-split BTF")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251104203309.318429-2-alan.maguire@oracle.com
|
|
Add SMMU-V3 Performance Monitoring Counter Group (PMCG) nodes for
Agilex5 to support SMMU performance event monitoring.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add L2 and L3 cache nodes to the device tree to resolve the
"unable to detect cache hierarchy" warning reported by cacheinfo.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Christian Brauner <brauner@kernel.org> says:
The recent changes to rework coredump handling to rely on unix sockets
are in the process of being used in systemd. Yu reported on shortcoming
nameling that the signal causing the coredump was available before the
crashing process was reaped.
The previous systemd coredump container interface requires the coredump
file descriptor, and basic information including the signal number to be
sent to the container. This means we need to have the signal number
available before sending the coredump to the container.
In general, the extension makes sense and fits with the rest of the
coredump information.
In addition to this extension this fixes a bunch of the tests that were
failing and reworks the publication mechanism for exit and coredump info
retrievable via the pidfd ioctl.
* patches from https://patch.msgid.link/20251028-work-coredump-signal-v1-0-ca449b7b7aa0@kernel.org: (22 commits)
selftests/coredump: add second PIDFD_INFO_COREDUMP_SIGNAL test
selftests/coredump: add first PIDFD_INFO_COREDUMP_SIGNAL test
selftests/coredump: ignore ENOSPC errors
selftests/coredump: add debug logging to coredump socket protocol tests
selftests/coredump: add debug logging to coredump socket tests
selftests/coredump: add debug logging to test helpers
selftests/coredump: handle edge-triggered epoll correctly
selftests/coredump: fix userspace coredump client detection
selftests/coredump: fix userspace client detection
selftests/coredump: split out coredump socket tests
selftests/coredump: split out common helpers
selftests/pidfd: add second supported_mask test
selftests/pidfd: add first supported_mask test
selftests/pidfd: update pidfd header
pidfs: expose coredump signal
pidfs: drop struct pidfs_exit_info
pidfs: prepare to drop exit_info pointer
pidfd: add a new supported_mask field
pidfs: add missing BUILD_BUG_ON() assert on struct pidfd_info
pidfs: add missing PIDFD_INFO_SIZE_VER1
...
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-0-ca449b7b7aa0@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Verify that when using simple socket-based coredump (@ pattern),
the coredump_signal field is correctly exposed as SIGABRT.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-22-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Verify that when using simple socket-based coredump (@ pattern),
the coredump_signal field is correctly exposed as SIGSEGV.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-21-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If we crash multiple processes at the same time we may run out of space.
Just ignore those errors. They're not actually all that relevant for the
test.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-20-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
So it's easier to figure out bugs.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-19-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
So it's easier to figure out bugs.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-18-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
so we can easily figure out why something failed.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-17-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
by putting the file descriptor into non-blocking mode.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-16-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
PIDFD_INFO_COREDUMP is only retrievable until the task has exited. After
it has exited task->mm is NULL. So if the task didn't actually coredump
we can't retrieve it's dumpability settings anymore. Only if the task
did coredump will we have stashed the coredump information in the
respective struct pid.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-15-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We need to request PIDFD_INFO_COREDUMP in the first place.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-14-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Split the coredump socket tests into separate files.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-13-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
into separate files.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-12-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Verify that supported_mask is returned even when other fields are
requested.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-11-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Verify that when PIDFD_INFO_SUPPORTED_MASK is requested, the kernel
returns the supported_mask field indicating which flags the kernel
supports.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-10-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Include the new defines and members.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-9-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently the automatic block layer PI generation allocates the integrity
buffer using kmalloc, and thus could deadlock, or fail I/O request due
to memory pressure.
Fix this by adding a mempool, and capping the maximum I/O size on PI
capable devices to not exceed the allocation size of the mempool.
Link: https://lore.kernel.org/linux-block/20251103101653.2083310-1-hch@lst.de/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* autopi-deadlock:
block: make bio auto-integrity deadlock safe
block: blocking mempool_alloc doesn't fail
|
|
The current block layer automatic integrity protection allocates the
actual integrity buffer, which has three problems:
- because it happens at the bottom of the I/O stack and doesn't use a
mempool it can deadlock under load
- because the data size in a bio is almost unbounded when using lage
folios it can relatively easily exceed the maximum kmalloc size
- even when it does not exceed the maximum kmalloc size, it could
exceed the maximum segment size of the device
Fix this by limiting the I/O size so that we can allocate at least a
2MiB integrity buffer, i.e. 128MiB for 8 byte PI and 512 byte integrity
intervals, and create a mempool as a last resort for this maximum size,
mirroring the scheme used for bvecs. As a nice upside none of this
can fail now, so we remove the error handling and open code the
trivial addition of the bip vec.
The new allocation helpers sit outside of bio-integrity-auto.c because
I plan to reuse them for file system based PI in the near future.
Fixes: 7ba1ba12eeef ("block: Block layer data integrity support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
So remove the error check for it in bio_integrity_prep.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Debian 13 (released 2025-08-09) packages Rust 1.85.0 [1], which is recent
enough to build Linux.
Thus document it.
In fact, we are planning to propose that the minimum supported Rust
version in Linux follows Debian Stable releases, with Debian 13 being
the first one we upgrade to, i.e. Rust 1.85.
Link: https://www.debian.org/News/2025/20250809 [1]
Link: https://patch.msgid.link/20251012224645.1148411-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Pull rdma fixes from Jason Gunthorpe:
- Memory leak in bnxt GSI qp path
- Failure in irdma registering large MRs
- Failure to clean out the right CQ table entry in irdma
- Invalid vf_id in some cases
- Incorrect error unwind in EFA CQ create
- hns doesn't use the optimal cq/qp relationships for it's HW banks
- hns reports the wrong SGE size to userspace for its QPs
- Corruption of the hns work queue entries in some cases
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
MAINTAINERS: Update irdma maintainers
RDMA/irdma: Fix vf_id size to u16 to avoid overflow
RDMA/hns: Remove an extra blank line
RDMA/hns: Fix wrong WQE data when QP wraps around
RDMA/hns: Fix the modification of max_send_sge
RDMA/hns: Fix recv CQ and QP cache affinity
RDMA/uverbs: Fix umem release in UVERBS_METHOD_CQ_CREATE
RDMA/irdma: Set irdma_cq cq_num field during CQ create
RDMA/irdma: Fix SD index calculation
RDMA/bnxt_re: Fix a potential memory leak in destroy_gsi_sqp
|
|
This is supposed to be "priv" but we accidentally pass "&priv" which is
an address in the stack and so it will lead to memory corruption when
the imx_sc_key_action() function is called. Remove the &.
Fixes: 768062fd1284 ("Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/aQYKR75r2VMFJutT@stanley.mountain
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
When a connector is connected but inactive (e.g., disabled by desktop
environments), pipe_ctx->stream_res.tg will be destroyed. Then, reading
odm_combine_segments causes kernel NULL pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 16 UID: 0 PID: 26474 Comm: cat Not tainted 6.17.0+ #2 PREEMPT(lazy) e6a17af9ee6db7c63e9d90dbe5b28ccab67520c6
Hardware name: LENOVO 21Q4/LNVNB161216, BIOS PXCN25WW 03/27/2025
RIP: 0010:odm_combine_segments_show+0x93/0xf0 [amdgpu]
Code: 41 83 b8 b0 00 00 00 01 75 6e 48 98 ba a1 ff ff ff 48 c1 e0 0c 48 8d 8c 07 d8 02 00 00 48 85 c9 74 2d 48 8b bc 07 f0 08 00 00 <48> 8b 07 48 8b 80 08 02 00>
RSP: 0018:ffffd1bf4b953c58 EFLAGS: 00010286
RAX: 0000000000005000 RBX: ffff8e35976b02d0 RCX: ffff8e3aeed052d8
RDX: 00000000ffffffa1 RSI: ffff8e35a3120800 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff8e3580eb0000 R09: ffff8e35976b02d0
R10: ffffd1bf4b953c78 R11: 0000000000000000 R12: ffffd1bf4b953d08
R13: 0000000000040000 R14: 0000000000000001 R15: 0000000000000001
FS: 00007f44d3f9f740(0000) GS:ffff8e3caa47f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000006485c2000 CR4: 0000000000f50ef0
PKRU: 55555554
Call Trace:
<TASK>
seq_read_iter+0x125/0x490
? __alloc_frozen_pages_noprof+0x18f/0x350
seq_read+0x12c/0x170
full_proxy_read+0x51/0x80
vfs_read+0xbc/0x390
? __handle_mm_fault+0xa46/0xef0
? do_syscall_64+0x71/0x900
ksys_read+0x73/0xf0
do_syscall_64+0x71/0x900
? count_memcg_events+0xc2/0x190
? handle_mm_fault+0x1d7/0x2d0
? do_user_addr_fault+0x21a/0x690
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x6c/0x74
RIP: 0033:0x7f44d4031687
Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00>
RSP: 002b:00007ffdb4b5f0b0 EFLAGS: 00000202 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 00007f44d3f9f740 RCX: 00007f44d4031687
RDX: 0000000000040000 RSI: 00007f44d3f5e000 RDI: 0000000000000003
RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007f44d3f5e000
R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000040000
</TASK>
Modules linked in: tls tcp_diag inet_diag xt_mark ccm snd_hrtimer snd_seq_dummy snd_seq_midi snd_seq_oss snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device x>
snd_hda_codec_atihdmi snd_hda_codec_realtek_lib lenovo_wmi_helpers think_lmi snd_hda_codec_generic snd_hda_codec_hdmi snd_soc_core kvm snd_compress uvcvideo sn>
platform_profile joydev amd_pmc mousedev mac_hid sch_fq_codel uinput i2c_dev parport_pc ppdev lp parport nvme_fabrics loop nfnetlink ip_tables x_tables dm_cryp>
CR2: 0000000000000000
---[ end trace 0000000000000000 ]---
RIP: 0010:odm_combine_segments_show+0x93/0xf0 [amdgpu]
Code: 41 83 b8 b0 00 00 00 01 75 6e 48 98 ba a1 ff ff ff 48 c1 e0 0c 48 8d 8c 07 d8 02 00 00 48 85 c9 74 2d 48 8b bc 07 f0 08 00 00 <48> 8b 07 48 8b 80 08 02 00>
RSP: 0018:ffffd1bf4b953c58 EFLAGS: 00010286
RAX: 0000000000005000 RBX: ffff8e35976b02d0 RCX: ffff8e3aeed052d8
RDX: 00000000ffffffa1 RSI: ffff8e35a3120800 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff8e3580eb0000 R09: ffff8e35976b02d0
R10: ffffd1bf4b953c78 R11: 0000000000000000 R12: ffffd1bf4b953d08
R13: 0000000000040000 R14: 0000000000000001 R15: 0000000000000001
FS: 00007f44d3f9f740(0000) GS:ffff8e3caa47f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000006485c2000 CR4: 0000000000f50ef0
PKRU: 55555554
Fix this by checking pipe_ctx->stream_res.tg before dereferencing.
Fixes: 07926ba8a44f ("drm/amd/display: Add debugfs interface for ODM combine info")
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mario Limoncello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f19bbecd34e3c15eed7e5e593db2ac0fc7a0e6d8)
Cc: stable@vger.kernel.org
|
|
If process is killed. the vm entity is stopped, submit pt update job
will trigger the error message "*ERROR* Trying to push to a killed
entity", job will not execute.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 10c382ec6c6d1e11975a11962bec21cba6360391)
Cc: stable@vger.kernel.org
|
|
Fix the flows for S0ix. There is no need to stop
rlc or reintialize PMFW in S0ix.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fd39b5a5830d8f2553e0c09d4d50bdff28b10080)
Cc: <stable@vger.kernel.org> # c81f5cebe849: drm/amdgpu: Drop PMFW RLC notifier from amdgpu_device_suspend()
Cc: <stable@vger.kernel.org>
|
|
For S3 on vangogh, PMFW needs to be notified before the
driver powers down RLC. This already happens in smu_disable_dpms()
so drop the superfluous call in amdgpu_device_suspend().
Co-developed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 960e30a61e1a7ca5341a6cf9481e770e1cda24aa)
|
|
Update the table of program types in the libbpf docs with the missing
k/uprobe multi and session program types.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251029180932.98038-1-donald.hunter@gmail.com
|
|
[Why & How]
This fixes the black screen issue on certain APUs with HDMI,
accompanied by the following messages:
amdgpu 0000:c4:00.0: amdgpu: [drm] Failed to setup vendor info
frame on connector DP-1: -22
amdgpu 0000:c4:00.0: [drm] Cannot find any crtc or sizes [drm]
Cannot find any crtc or sizes
Fixes: 489f0f600ce2 ("drm/amd/display: Fix DVI-D/HDMI adapters")
Suggested-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 678c901443a6d2e909e3b51331a20f9d8f84ce82)
|
|
commit 978fa2f6d0b12 ("drm/amd/display: Use scaling for non-native
resolutions on eDP") started using the GPU scaler hardware to scale
when a non-native resolution was picked on eDP. This scaling was done
to fill the screen instead of maintain aspect ratio.
The idea was supposed to be that if a different scaling behavior is
preferred then the compositor would request it. The not following
aspect ratio behavior however isn't desirable, so adjust it to follow
aspect ratio and still try to fill screen.
Note: This will lead to black bars in some cases for non-native
resolutions. Compositors can request the previous behavior if desired.
Fixes: 978fa2f6d0b1 ("drm/amd/display: Use scaling for non-native resolutions on eDP")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4538
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 825df7ff4bb1a383ad4827545e09aec60d230770)
|
|
interface bpf_program__load().
Commit be2f2d1680df ("libbpf: Deprecate bpf_program__load() API") marked
bpf_program__load() as deprecated starting with libbpf v0.6. And later
in commit 146bf811f5ac ("libbpf: remove most other deprecated high-level
APIs") actually removed the bpf_program__load() implementation and
related old high-level APIs.
This patch update the comment in bpf_program__set_attach_target() to
remove the reference to the deprecated interface bpf_program__load().
Signed-off-by: Jianyun Gao <jianyungao89@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251103120727.145965-1-jianyungao89@gmail.com
|
|
Complete the missing @param and @return tags in the Doxygen comments of
the btf.h file.
Signed-off-by: Jianyun Gao <jianyungao89@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251103115836.144339-1-jianyungao89@gmail.com
|
|
Use the correct label to complete all cleanup work.
Fixes: 4d154b1ca580 ("drm/amd/pm: Add support for DPM policies")
Fixes: 25e82f2e2c59 ("drm/amd/pm: Add temperature metrics sysfs entry")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4c4c138a1c86775c4d47e24f26357a1f8b64d0a3)
|
|
These were not set so soft recovery was inadvertantly
disabled.
Fixes: 6ac55eab4fc4 ("drm/amdgpu: move reset support type checks into the caller")
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1972763505d728c604b537180727ec8132e619df)
|
|
Rust 1.93.0 (expected 2026-01-22) is stabilizing `-Zno-jump-tables`
[1][2] as `-Cjump-tables=n` [3].
Without this change, one would eventually see:
RUSTC L rust/core.o
error: unknown unstable option: `no-jump-tables`
Thus support the upcoming version.
Link: https://github.com/rust-lang/rust/issues/116592 [1]
Link: https://github.com/rust-lang/rust/pull/105812 [2]
Link: https://github.com/rust-lang/rust/pull/145974 [3]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Acked-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251101094011.1024534-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Currently, the export of kvm_zap_gfn_range() is misplaced, i.e., it's
not placed right after the kvm_zap_gfn_range() function body but after
kvm_mmu_zap_collapsible_spte(). Move it to the right place.
No functional change intended.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20251021114345.159372-1-kai.huang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
On big endian arm kernels, the arm optimized Curve25519 code produces
incorrect outputs and fails the Curve25519 test. This has been true
ever since this code was added.
It seems that hardly anyone (or even no one?) actually uses big endian
arm kernels. But as long as they're ostensibly supported, we should
disable this code on them so that it's not accidentally used.
Note: for future-proofing, use !CPU_BIG_ENDIAN instead of
CPU_LITTLE_ENDIAN. Both of these are arch-specific options that could
get removed in the future if big endian support gets dropped.
Fixes: d8f1308a025f ("crypto: arm/curve25519 - wire up NEON implementation")
Cc: stable@vger.kernel.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251104054906.716914-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Commit 2f13daee2a72 ("lib/crypto/curve25519-hacl64: Disable KASAN with
clang-17 and older") inadvertently disabled KASAN in curve25519-hacl64.o
for GCC unconditionally because clang-min-version will always evaluate
to nothing for GCC. Add a check for CONFIG_CC_IS_CLANG to avoid applying
the workaround for GCC, which is only needed for clang-17 and older.
Cc: stable@vger.kernel.org
Fixes: 2f13daee2a72 ("lib/crypto/curve25519-hacl64: Disable KASAN with clang-17 and older")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251103-curve25519-hacl64-fix-kasan-workaround-v2-1-ab581cbd8035@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
When unbinding a memslot from a guest_memfd instance, remove the bindings
even if the guest_memfd file is dying, i.e. even if its file refcount has
gone to zero. If the memslot is freed before the file is fully released,
nullifying the memslot side of the binding in kvm_gmem_release() will
write to freed memory, as detected by syzbot+KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in kvm_gmem_release+0x176/0x440 virt/kvm/guest_memfd.c:353
Write of size 8 at addr ffff88807befa508 by task syz.0.17/6022
CPU: 0 UID: 0 PID: 6022 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
kvm_gmem_release+0x176/0x440 virt/kvm/guest_memfd.c:353
__fput+0x44c/0xa70 fs/file_table.c:468
task_work_run+0x1d4/0x260 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xe9/0x130 kernel/entry/common.c:43
exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline]
do_syscall_64+0x2bd/0xfa0 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fbeeff8efc9
</TASK>
Allocated by task 6023:
kasan_save_stack mm/kasan/common.c:56 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:77
poison_kmalloc_redzone mm/kasan/common.c:397 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:414
kasan_kmalloc include/linux/kasan.h:262 [inline]
__kmalloc_cache_noprof+0x3e2/0x700 mm/slub.c:5758
kmalloc_noprof include/linux/slab.h:957 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
kvm_set_memory_region+0x747/0xb90 virt/kvm/kvm_main.c:2104
kvm_vm_ioctl_set_memory_region+0x6f/0xd0 virt/kvm/kvm_main.c:2154
kvm_vm_ioctl+0x957/0xc60 virt/kvm/kvm_main.c:5201
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6023:
kasan_save_stack mm/kasan/common.c:56 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:77
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:252 [inline]
__kasan_slab_free+0x5c/0x80 mm/kasan/common.c:284
kasan_slab_free include/linux/kasan.h:234 [inline]
slab_free_hook mm/slub.c:2533 [inline]
slab_free mm/slub.c:6622 [inline]
kfree+0x19a/0x6d0 mm/slub.c:6829
kvm_set_memory_region+0x9c4/0xb90 virt/kvm/kvm_main.c:2130
kvm_vm_ioctl_set_memory_region+0x6f/0xd0 virt/kvm/kvm_main.c:2154
kvm_vm_ioctl+0x957/0xc60 virt/kvm/kvm_main.c:5201
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Deliberately don't acquire filemap invalid lock when the file is dying as
the lifecycle of f_mapping is outside the purview of KVM. Dereferencing
the mapping is *probably* fine, but there's no need to invalidate anything
as memslot deletion is responsible for zapping SPTEs, and the only code
that can access the dying file is kvm_gmem_release(), whose core code is
mutually exclusive with unbinding.
Note, the mutual exclusivity is also what makes it safe to access the
bindings on a dying gmem instance. Unbinding either runs with slots_lock
held, or after the last reference to the owning "struct kvm" is put, and
kvm_gmem_release() nullifies the slot pointer under slots_lock, and puts
its reference to the VM after that is done.
Reported-by: syzbot+2479e53d0db9b32ae2aa@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68fa7a22.a70a0220.3bf6c6.008b.GAE@google.com
Tested-by: syzbot+2479e53d0db9b32ae2aa@syzkaller.appspotmail.com
Fixes: a7800aa80ea4 ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
Cc: stable@vger.kernel.org
Cc: Hillf Danton <hdanton@sina.com>
Reviewed-By: Vishal Annapurve <vannapurve@google.com>
Link: https://patch.msgid.link/20251104011205.3853541-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
