| Age | Commit message (Collapse) | Author |
|---|
|
This patch series implements a cached report zones using information
from the block layer zone write plugs and a new zone condition tracking.
This avoids having to execute slow report zones commands on the device
when for instance mounting file systems, which can significantly speed
things up, especially in setups with multiple SMR HDDs (e.g. a BTRFS
RAID volume).
The first patch improves handling of zone management commands. Patch 2
fixes zone resource updates and the following 3 patches cleanup the zone
code in preparation for introducing cached zone report support.
From patch 6 to 13, cached report zones is implemented and made
available to users with a new ioctl() command.
Finally, patches 14 and 15 introduce the use of cached report zones in
the mount operation of XFS and BTRFS.
Link: https://lore.kernel.org/linux-block/20251104212249.1075412-1-dlemoal@kernel.org/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* cached-zones:
xfs: use blkdev_report_zones_cached()
btrfs: use blkdev_report_zones_cached()
block: add zone write plug condition to debugfs zone_wplugs
block: improve zone_wplugs debugfs attribute output
block: introduce BLKREPORTZONESV2 ioctl
block: introduce blkdev_report_zones_cached()
block: introduce blkdev_get_zone_info()
block: refactor blkdev_report_zones() code
block: track zone conditions
block: use zone condition to determine conventional zones
block: reorganize struct blk_zone_wplug
block: introduce disk_report_zone()
block: cleanup blkdev_report_zones()
block: freeze queue when updating zone resources
block: handle zone management operations completions
|
|
Modify xfs_mount_zones() to replace the call to blkdev_report_zones()
with blkdev_report_zones_cached() to speed-up mount operations.
Since this causes xfs_zone_validate_seq() to see zones with the
BLK_ZONE_COND_ACTIVE condition, this function is also modified to acept
this condition as valid.
With this change, mounting a freshly formatted large capacity (30 TB)
SMR HDD completes under 2s compared to over 4.7s before.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Modify btrfs_get_dev_zones() and btrfs_sb_log_location_bdev() to replace
the call to blkdev_report_zones() with blkdev_report_zones_cached() to
speed-up mount operations. btrfs_get_dev_zone_info() is also modified to
take into account the BLK_ZONE_COND_ACTIVE condition, which is
equivalent to either BLK_ZONE_COND_IMP_OPEN, BLK_ZONE_COND_EXP_OPEN or
BLK_ZONE_COND_CLOSED.
With this change, mounting a freshly formatted large capacity (30 TB)
SMR HDD completes under 100ms compared to over 1.8s before.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Modify queue_zone_wplug_show() to include the condition of a zone write
plug to the zone_wplugs debugfs attribute of a zoned block device.
To improve readability and ease of use, rather than the zone condition
raw value, the zone condition name is given using blk_zone_cond_str().
Suggested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make the output of the zone_wplugs debugfs attribute file more easily
readable by adding the name of the zone write plugs fields in the
output.
No functional changes.
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce the new BLKREPORTZONESV2 ioctl command to allow user
applications access to the fast zone report implemented by
blkdev_report_zones_cached(). This new ioctl is defined as number 142
and is documented in include/uapi/linux/fs.h.
Unlike the existing BLKREPORTZONES ioctl, this new ioctl uses the flags
field of struct blk_zone_report also as an input. If the user sets the
BLK_ZONE_REP_CACHED flag as an input, then blkdev_report_zones_cached()
is used to generate the zone report using cached zone information. If
this flag is not set, then BLKREPORTZONESV2 behaves in the same manner
as BLKREPORTZONES and the zone report is generated by accessing the
zoned device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce the function blkdev_report_zones_cached() to provide a fast
report zone built using the blkdev_get_zone_info() function, which gets
zone information from a disk zones_cond array or zone write plugs.
For a large capacity SMR drive, such fast report zone can be completed
in a few milliseconds compared to several seconds completion times
when the report zone is obtained from the device.
The zone report is built in the same manner as with the regular
blkdev_report_zones() function, that is, the first zone reported is the
one containing the specified start sector and the report is limited to
the specified number of zones (nr_zones argument). The information for
each zone in the report is obtained using blkdev_get_zone_info().
For zoned devices that do not use zone write plug resources,
using blkdev_get_zone_info() is inefficient as the zone report would
be very slow, generated one zone at a time. To avoid this,
blkdev_report_zones_cached() falls back to calling
blkdev_do_report_zones() to execute a regular zone report. In this case,
the .report_active field of struct blk_report_zones_args is set to true
to report zone conditions using the BLK_ZONE_COND_ACTIVE condition in
place of the implicit open, explicit open and closed conditions.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce the function blkdev_get_zone_info() to obtain a single zone
information from cached zone data, that is, either from the zone write
plug for the target zone if it exists and from the disk zones_cond
array otherwise.
Since sequential zones that do not have a zone write plug are either
full, empty or in a bad state (read-only or offline), the zone write
pointer can be inferred from the zone condition cached in the disk
zones_cond array. For sequential zones that have a zone write plug, the
zone condition and zone write pointer are obtained from the condition
and write pointer offset managed with the zone write plug. This allows
obtaining the information for a zone much more quickly than having to
execute a report zones command on the device.
blkdev_get_zone_info() falls back to using a regular zone report if the
target zone is flagged as needing an update with the
BLK_ZONE_WPLUG_NEED_WP_UPDATE flag, or if the target device does not
use zone write plugs (i.e. a device mapper device). In this case, the
new function blkdev_report_zone_fallback() is used and the zone
condition is reported consistantly with the cahced report, that is, the
BLK_ZONE_COND_ACTIVE condition is used in place of the implicit open,
explicit open and closed conditions. This is achieved by adding the
.report_active field to struct blk_report_zones_args and by having
disk_report_zone() sets the correct zone condition if .report_active is
true.
In preparation for using blkdev_get_zone_info() in upcoming file systems
changes, also export this function as a GPL symbol.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for implementing cached report zone, split the main part
of the code of blkdev_report_zones() into the helper function
blkdev_do_report_zones(), with this new helper taking as argument a
struct blk_report_zones_args pointer instead of a report callback
function and its private argument.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The function blk_revalidate_zone_cond() already caches the condition of
all zones of a zoned block device in the zones_cond array of a gendisk.
However, the zone conditions are updated only when the device is scanned
or revalidated.
Implement tracking of the runtime changes to zone conditions using
the new cond field in struct blk_zone_wplug. The size of this structure
remains 112 Bytes as the new field replaces the 4 Bytes padding at the
end of the structure.
Beause zones that do not have a zone write plug can be in the empty,
implicit open, explicit open or full condition, the zones_cond array of
a disk is used to track the conditions, of zones that do not have a zone
write plug. The condition of such zone is updated in the disk zones_cond
array when a zone reset, reset all or finish operation is executed, and
also when a zone write plug is removed from the disk hash table when the
zone becomes full.
Since a device may automatically close an implicitly open zone when
writing to an empty or closed zone, if the total number of open zones
has reached the device limit, the BLK_ZONE_COND_IMP_OPEN and
BLK_ZONE_COND_CLOSED zone conditions cannot be precisely tracked. To
overcome this, the zone condition BLK_ZONE_COND_ACTIVE is introduced to
represent a zone that has the condition BLK_ZONE_COND_IMP_OPEN,
BLK_ZONE_COND_EXP_OPEN or BLK_ZONE_COND_CLOSED. This follows the
definition of an active zone as defined in the NVMe Zoned Namespace
specifications. As such, for a zoned device that has a limit on the
maximum number of open zones, we will never have more zones in the
BLK_ZONE_COND_ACTIVE condition than the device limit. This is compatible
with the SCSI ZBC and ATA ZAC specifications for SMR HDDs as these
devices do not have a limit on the number of active zones.
The function disk_zone_wplug_set_wp_offset() is modified to use the new
helper disk_zone_wplug_update_cond() to update a zone write plug
condition whenever a zone write plug write offset is updated on
submission or merging of write BIOs to a zone.
The functions blk_zone_reset_bio_endio(), blk_zone_reset_all_bio_endio()
and blk_zone_finish_bio_endio() are modified to update the condition of
the zones targeted by reset, reset_all and finish operations, either
using though disk_zone_wplug_set_wp_offset() for zones that have a
zone write plug, or using the disk_zone_set_cond() helper to update the
zones_cond array of the disk for zones that do not have a zone write
plug.
When a zone write plug is removed from the disk hash table (when the
zone becomes empty or full), the condition of struct blk_zone_wplug is
used to update the disk zones_cond array. Conversely, when a zone write
plug is added to the disk hash table, the zones_cond array is used to
initialize the zone write plug condition.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The conv_zones_bitmap field of struct gendisk is used to define a bitmap
to identify the conventional zones of a zoned block device. The bit for
a zone is set in this bitmap if the zone is a conventional one, that is,
if the zone type is BLK_ZONE_TYPE_CONVENTIONAL. For such zone, this
always corresponds to the zone condition BLK_ZONE_COND_NOT_WP.
In other words, conv_zones_bitmap tracks a single condition of the
zones of a zoned block device.
In preparation for tracking more zone conditions, change
conv_zones_bitmap into an array of zone conditions, using 1 byte per
zone. This increases the memory usage from 1 bit per zone to 1 byte per
zone, that is, from 16 KiB to about 100 KiB for a 30 TB SMR HDD with 256
MiB zones. This is a trade-off to allow fast cached report zones later
on top of this change.
Rename the conv_zones_bitmap field of struct gendisk to zones_cond. Add
a blk_revalidate_zone_cond() function to initialize the zones_cond array
of a disk during device scan and to update it on device revalidation.
Move the allocation of the zones_cond array to
disk_revalidate_zone_resources(), making sure that this array is always
allocated, even for devices that do not need zone write plugs (zone
resources), to ensure that bdev_zone_is_seq() can be re-implemented to
use the zone condition array in place of the conv zones bitmap.
Finally, the function bdev_zone_is_seq() is rewritten to use a test on
the condition of the target zone.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reorganize the fields of struct blk_zone_wplug to remove a hole after
the wp_offset field and avoid having the bio_work structure split
between 2 cache lines.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit b76b840fd933 ("dm: Fix dm-zoned-reclaim zone write pointer
alignment") introduced an indirect call for the callback function of a
report zones executed with blkdev_report_zones(). This is necessary so
that the function disk_zone_wplug_sync_wp_offset() can be called to
refresh a zone write plug zone write pointer offset after a write error.
However, this solution makes following the path of a zone information
harder to understand.
Clean this up by introducing the new blk_report_zones_args structure to
define a zone report callback and its private data and introduce the
helper function disk_report_zone() which calls both
disk_zone_wplug_sync_wp_offset() and the zone report user callback
function for all zones of a zone report. This helper function must be
called by all block device drivers that implement the report zones
block operation in order to correctly report a zone information.
All block device drivers supporting the report_zones block operation are
updated to use this new scheme.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The variable capacity is used only in one place and so can be removed
and get_capacity(disk) used directly instead.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Modify disk_update_zone_resources() to freeze the device queue before
updating the number of zones, zone capacity and other zone related
resources. The locking order resulting from the call to
queue_limits_commit_update_frozen() is preserved, that is, the queue
limits lock is first taken by calling queue_limits_start_update() before
freezing the queue, and the queue is unfrozen after executing
queue_limits_commit_update(), which replaces the call to
queue_limits_commit_update_frozen().
This change ensures that there are no in-flights I/Os when the zone
resources are updated due to a zone revalidation. In case of error when
the limits are applied, directly call disk_free_zone_resources() from
disk_update_zone_resources() while the disk queue is still frozen to
avoid needing to freeze & unfreeze the queue again in
blk_revalidate_disk_zones(), thus simplifying that function code a
little.
Fixes: 0b83c86b444a ("block: Prevent potential deadlock in blk_revalidate_disk_zones()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The functions blk_zone_wplug_handle_reset_or_finish() and
blk_zone_wplug_handle_reset_all() both modify the zone write pointer
offset of zone write plugs that are the target of a reset, reset all or
finish zone management operation. However, these functions do this
modification before the BIO is executed. So if the zone operation fails,
the modified zone write pointer offsets become invalid.
Avoid this by modifying the zone write pointer offset of a zone write
plug that is the target of a zone management operation when the
operation completes. To do so, modify blk_zone_bio_endio() to call the
new function blk_zone_mgmt_bio_endio() which in turn calls the functions
blk_zone_reset_all_bio_endio(), blk_zone_reset_bio_endio() or
blk_zone_finish_bio_endio() depending on the operation of the completed
BIO, to modify a zone write plug write pointer offset accordingly.
These functions are called only if the BIO execution was successful.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of doing this on the first call of the function just initialize
the stub fence during kernel load.
This has the clear advantage of lower overhead and also doesn't rely on
the ops to not be NULL any more.
v2: use correct signal function
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20251031134442.113648-3-christian.koenig@amd.com
|
|
When the PCIe controller is running in endpoint mode, the controller
initialization is triggered by a PERST# (PCIe reset) GPIO deassertion.
The driver has configured an IRQ to trigger when the PERST# GPIO changes
state. Without the pinctrl definition, we do not get an IRQ when PERST#
is deasserted, so the PCIe controller never gets initialized.
Add the missing definitions, so that the controller actually gets
initialized.
Fixes: ec142c44b026 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT")
Fixes: 0580286d0d22 ("arm64: tegra: Add Tegra234 PCIe C4 EP definition")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[treding@nvidia.com: add blank lines to separate blocks]
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add a driver for the regulators found on the MT6363 PMIC, fully
controlled by SPMI interface.
This PMIC regulates voltage with an input range of 2.6-5.0V, and
features 10 buck converters and 26 LDOs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251027110527.21002-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add bindings for the regulators found in the MediaTek MT6363 PMIC,
usually found in board designs using the MT6991 Dimensity 9400 and
on MT8196 Kompanio SoC for Chromebooks, along with the MT6316 and
MT6373 PMICs.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251027110527.21002-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a driver for the regulators found on all types of the MediaTek
MT6316 SPMI PMIC, fully controlled by SPMI interface and featuring
four step down DCDC (buck) converters.
In particular, this includes support for:
- MT6316(BP/VP): 2+2 Phase (Phase 1: buck1+2, Phase 2: buck3+4)
- MT6316(CP/HP/KP): 3+1 Phase (Phase 1: buck1+2+4, Phase 2: buck3)
- MT6316(DP/TP): 4+0 Phase (Single phase, buck1+2+3+4)
Please note that the set/clear registers for the enable bits are
not documented in the datasheet version that I used as reference,
but those are used in the downstream driver and I verified that
are actually working as expected.
Besides, it's also worth clearly mentioning that the MT6316 PMICs
voltage selector register uses a weird 9-bits Big Endian format,
for which a driver-private helper is provided.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251027110527.21002-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add bindings for the regulators found in the MediaTek MT6316 PMIC,
usually found in board designs using the MT6991 Dimensity 9400 and
on MT8196 Kompanio SoC for Chromebooks.
This chip is fully controlled by SPMI and has multiple variants
providing different phase configurations.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251027110527.21002-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clean up the code using guard() for spin locks.
No functional changes, just cleanup.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-21-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clean up the code using guard() for spin locks.
No functional changes, just cleanup.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-20-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clean up the code using guard() for spin locks.
No functional changes, just cleanup.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-19-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clean up the code using guard() for spin locks.
No functional changes, just cleanup.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-18-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-17-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-16-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-15-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-14-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-13-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-12-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
remove unused variables in some of the audioreach functions.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-11-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Both capture and playback can have different runtimes, so set them
accordingly.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-10-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
make use of q6asm_get_hw_pointer to get the current hardware read/write
pointer and remove any additional code that does calculate this manually.
As this is redundant and prone to errors.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-9-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently q6asm-dai is performing an extra layer of calculation on the hw_ptr,
which is always prone to errors and redundant.
q6asm already has tokens to indentify the pointer pointers which an be
used to get the hw_ptr and this is more accurate then doing the
artificial calculation at upper layers.
Add helper function q6asm_get_hw_pointer() to get this hw_ptr.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-8-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the existing code, we are only setting up one period at a time, in a
ping-pong buffer style. This triggers lot of underruns in the dsp
leading to jitter noise during audio playback.
Fix this by scheduling all available periods, this will ensure that the dsp
has enough buffer feed and ultimatley fixing the underruns and audio distortion.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-7-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For record path, multiple read requests are queued to dsp in advance.
However when data stream is closed, the pending read requests are rejected
by the dsp and a response is sent to the driver, this case is not handled
in the driver resulting in errors like below
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
This is same for both write and eos.
Fix this by allowing ASM_DATA_CMD_READ_V2, ASM_DATA_CMD_EOS and
ASM_DATA_CMD_WRITE_V2 as expected response.
Reported-by: Martino Facchin <m.facchin@arduino.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-6-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Do not stop a q6asm stream if its not started, this can result in
unnecessary dsp command which will timeout anyway something like below:
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: CMD 10bcd timeout
Fix this by correctly checking the state.
Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-5-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DSP expects the periods to be aligned to fragment sizes, currently
setting up to hw constriants on periods bytes is not going to work
correctly as we can endup with periods sizes aligned to 32 bytes however
not aligned to fragment size.
Update the constriants to use fragment size, and also set at step of
10ms for period size to accommodate DSP requirements of 10ms latency.
Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-4-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A matching Common object post processing instance is normally resused
across multiple streams. However currently we close this on DSP
even though there is a refcount on this copp object, this can result in
below error.
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: Found Matching Copp 0x0
qcom-q6adm aprsvc:service:4:8: cmd = 0x10325 return error = 0x2
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: DSP returned error[2]
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: Found Matching Copp 0x0
qcom-q6adm aprsvc:service:4:8: cmd = 0x10325 return error = 0x2
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: cmd = 0x10327 return error = 0x2
qcom-q6adm aprsvc:service:4:8: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: Failed to close copp -22
qcom-q6adm aprsvc:service:4:8: cmd = 0x10327 return error = 0x2
qcom-q6adm aprsvc:service:4:8: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: Failed to close copp -22
Fix this by addressing moving the adm_close to copp_kref destructor
callback.
Fixes: 7b20b2be51e1 ("ASoC: qdsp6: q6adm: Add q6adm driver")
Cc: Stable@vger.kernel.org
Reported-by: Martino Facchin <m.facchin@arduino.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not expect the appl_ptr to move backward and requires
explict sync. Make sure that the userspace does not do appl_ptr rewinds
by specifying the correct flags in pcm_info.
Without this patch, the result could be a forever loop as current logic assumes
that appl_ptr can only move forward.
Fixes: 3d4a4411aa8b ("ASoC: q6apm-dai: schedule all available frames to avoid dsp under-runs")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Long ago, the kernel module license checks were bypassed by embedding a
NUL character in the MODULE_LICENSE() string[1]. By using a string like
"GPL\0proprietary text", the kernel would only read "GPL" due to C string
termination at the NUL byte, allowing proprietary modules to avoid kernel
tainting and access GPL-only symbols.
The MODULE_INFO() macro stores these strings in the .modinfo ELF
section, and get_next_modinfo() uses strcmp()-family functions
which stop at the first NUL. This split the embedded string into two
separate .modinfo entries, with only the first part being processed by
license_is_gpl_compatible().
Add a compile-time check using static_assert that compares the full
string length (sizeof - 1) against __builtin_strlen(), which stops at
the first NUL. If they differ, compilation fails with a clear error
message.
While this check can still be circumvented by modifying the ELF binary
post-compilation, it prevents accidental embedded NULs and forces
intentional abuse to require deliberate binary manipulation rather than
simple source-level tricks.
Build tested with test modules containing both valid and invalid license
strings. The check correctly rejects:
MODULE_LICENSE("GPL\0proprietary")
while accepting normal declarations:
MODULE_LICENSE("GPL")
Link: https://lwn.net/Articles/82305/ [1]
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
|
|
The DRIVER_AUTHOR macro incorrectly included a semicolon in its
string literal definition. Right now, this wasn't causing any real
problem, but coming changes to the MODULE_INFO() macro make this more
sensitive. Specifically, when used with MODULE_AUTHOR(), this created
syntax errors during macro expansion:
MODULE_AUTHOR(DRIVER_AUTHOR);
expands to:
MODULE_INFO(author, "Joonyoung Shim <jy0922.shim@samsung.com>";)
^
syntax error
Remove the trailing semicolon from the DRIVER_AUTHOR definition.
Semicolons should only appear at the point of use, not in the macro
definition.
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
|
|
The firmware filename macros incorrectly included semicolons in their
string literal definitions. Right now, this wasn't causing any real
problem, but coming changes to the MODULE_INFO() macro make this more
sensitive. Specifically, when used with MODULE_FIRMWARE(), this
created syntax errors during macro expansion:
MODULE_FIRMWARE(LME2510_C_S7395);
expands to:
MODULE_INFO(firmware, "dvb-usb-lme2510c-s7395.fw";)
^
syntax error
Remove the trailing semicolons from all six firmware filename macro
definitions. Semicolons should only appear at the point of use, not in
the macro definition.
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
|
|
Since commit d24cfee7f63d ("spi: Fix acpi deferred irq probe"), the
acpi_dev_gpio_irq_get() call gets delayed till spi_probe() is called
on the SPI device.
If there is no driver for the SPI device then the move to spi_probe()
results in acpi_dev_gpio_irq_get() never getting called. This may
cause problems by leaving the GPIO pin floating because this call is
responsible for setting up the GPIO pin direction and/or bias according
to the values from the ACPI tables.
Re-add the removed acpi_dev_gpio_irq_get() in acpi_register_spi_device()
to ensure the GPIO pin is always correctly setup, while keeping the
acpi_dev_gpio_irq_get() call added to spi_probe() to deal with
-EPROBE_DEFER returns caused by the GPIO controller not having a driver
yet.
Link: https://bbs.archlinux.org/viewtopic.php?id=302348
Fixes: d24cfee7f63d ("spi: Fix acpi deferred irq probe")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20251102190921.30068-1-hansg@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enforce checking of sb_min_blocksize() calls and update all callers
accordingly.
* patches from https://patch.msgid.link/20251104125009.2111925-2-yangyongpeng.storage@gmail.com:
block: add __must_check attribute to sb_min_blocksize()
xfs: check the return value of sb_min_blocksize() in xfs_fs_fill_super
isofs: check the return value of sb_min_blocksize() in isofs_fill_super
exfat: check return value of sb_min_blocksize in exfat_read_boot_sector
vfat: fix missing sb_min_blocksize() return value checks
Link: https://patch.msgid.link/20251104125009.2111925-2-yangyongpeng.storage@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
bm_register_write() opens an executable file using open_exec(), which
internally calls do_open_execat() and denies write access on the file to
avoid modification while it is being executed.
However, when an error occurs, bm_register_write() closes the file using
filp_close() directly. This does not restore the write permission, which
may cause subsequent write operations on the same file to fail.
Fix this by calling exe_file_allow_write_access() before filp_close() to
restore the write permission properly.
Fixes: e7850f4d844e ("binfmt_misc: fix possible deadlock in bm_register_write")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20251105022923.1813587-1-zilin@seu.edu.cn
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When sb_min_blocksize() returns 0 and the return value is not checked,
it may lead to a situation where sb->s_blocksize is 0 when
accessing the filesystem super block. After commit a64e5a596067bd
("bdev: add back PAGE_SIZE block size validation for
sb_set_blocksize()"), this becomes more likely to happen when the
block device’s logical_block_size is larger than PAGE_SIZE and the
filesystem is unformatted. Add the __must_check attribute to ensure
callers always check the return value.
Cc: stable@vger.kernel.org # v6.15
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Link: https://patch.msgid.link/20251104125009.2111925-6-yangyongpeng.storage@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In virtio_fs_add_queues_sysfs(), the code incorrectly checks fs->mqs_kobj
after calling kobject_create_and_add(). Change the check to fsvq->kobj
(fs->mqs_kobj -> fsvq->kobj) to ensure the per-queue kobject is
successfully created.
Fixes: 87cbdc396a31 ("virtio_fs: add sysfs entries for queue information")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20251027104658.1668537-1-alok.a.tiwari@oracle.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
