| Age | Commit message (Collapse) | Author |
|---|
|
The LEDS_EXPRESSWIRE library used by the driver requires GPIOLIB. Make
sure this dependency is not left unsatisfied.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/all/b6c481bb-e854-405e-a428-90301789fe20@infradead.org/
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20250729-expresswire-dep-fix-v1-2-635cd4cc746b@dujemihanovic.xyz
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
A user reports that on their Lenovo Corsola Magneton with EC firmware
steelix-15194.270.0 the driver probe fails with EINVAL. It turns out
that the power LED does not contain any color components as indicated
by the following "ectool led power query" output:
Brightness range for LED 1:
red : 0x0
green : 0x0
blue : 0x0
yellow : 0x0
white : 0x0
amber : 0x0
The LED also does not react to commands sent manually through ectool and
is generally non-functional.
Instead of failing the probe for all LEDs managed by the EC when one
without color components is encountered, silently skip those.
Cc: stable@vger.kernel.org
Fixes: 8d6ce6f3ec9d ("leds: Add ChromeOS EC driver")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251028-cros_ec-leds-no-colors-v1-1-ebe13a02022a@weissschuh.net
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
Including fixes from bluetooth and wireless.
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by
device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready
message" caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low
granularity of timers set relatively far in the future, and use it
where it matters (e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB,
multicast
- phy: lan8842: implement latest errata"
* tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
selftests/vsock: avoid false-positives when checking dmesg
net: bridge: fix MST static key usage
net: bridge: fix use-after-free due to MST port state bypass
lan966x: Fix sleeping in atomic context
bonding: fix NULL pointer dereference in actor_port_prio setting
net: dsa: microchip: Fix reserved multicast address table programming
net: wan: framer: pef2256: Switch to devm_mfd_add_devices()
net: libwx: fix device bus LAN ID
net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages
net/mlx5e: SHAMPO, Fix skb size check for 64K pages
net/mlx5e: SHAMPO, Fix header mapping for 64K pages
net: ti: icssg-prueth: Fix fdb hash size configuration
net/mlx5e: Fix return value in case of module EEPROM read error
net: gro_cells: Reduce lock scope in gro_cell_poll
libie: depend on DEBUG_FS when building LIBIE_FWLOG
wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup
netpoll: Fix deadlock in memory allocation under spinlock
net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error
virtio-net: fix received length check in big packets
bnxt_en: Fix warning in bnxt_dl_reload_down()
...
|
|
The Sharp LQ116M1JW105 reports that it supports 8 bpc modes,
but it will happen display noise in some videos.
So, limit it to 6 bpc modes.
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20251101040043.3768848-1-ajye_huang@compal.corp-partner.google.com
|
|
The kernel-doc in lib/hweight.c is global to the file and
currently has issues:
Warning: lib/hweight.c:13 expecting prototype for hweightN(). Prototype was for __sw_hweight32() instead
Warning: lib/hweight.c:13 function parameter 'w' not described in '__sw_hweight32'
Update it accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
In accordance with the history and nature of the operation
add lib/hweight.c to the BITOPS record in MAINTAINERS.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
After commit d50f21091358 ("kbuild: align modinfo section for Secureboot
Authenticode EDK2 compat"), running modules_install with certain
versions of kmod (such as 29.1 in Ubuntu Jammy) in certain
configurations may fail with:
depmod: ERROR: kmod_builtin_iter_next: unexpected string without modname prefix
The additional padding bytes to ensure .modinfo is aligned within
vmlinux.unstripped are unexpected by kmod, as this section has always
just been null-terminated strings.
Strip the trailing padding bytes from modules.builtin.modinfo after it
has been extracted from vmlinux.unstripped to restore the format that
kmod expects while keeping .modinfo aligned within vmlinux.unstripped to
avoid regressing the Authenticode calculation fix for EDK2.
Cc: stable@vger.kernel.org
Fixes: d50f21091358 ("kbuild: align modinfo section for Secureboot Authenticode EDK2 compat")
Reported-by: Omar Sandoval <osandov@fb.com>
Reported-by: Samir M <samir@linux.ibm.com>
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/7fef7507-ad64-4e51-9bb8-c9fb6532e51e@linux.ibm.com/
Tested-by: Omar Sandoval <osandov@fb.com>
Tested-by: Samir M <samir@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251105-kbuild-fix-builtin-modinfo-for-kmod-v1-1-b419d8ad4606@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
select will force a symbol to a specific value without considering
its dependencies. As a result, the i2c-k1 driver will fail to build
when OF or COMMON_CLK are disabled.
The reason for removing I2C_K1 instead of adding a depends on condition
is to keep the possibility for other SoCs to use this PMIC.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510211523.sSEVqPUQ-lkp@intel.com/
Acked-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://lore.kernel.org/all/20251022004830-GYB1522542@gentoo.org/ [1]
Link: https://patch.msgid.link/20251027-p1-kconfig-fix-v2-1-49688f30bae8@linux.spacemit.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Initializing the regmap_ranges using direct assignment to the range_min
and range_max members is a slightly verbose. In general we can make it a
tad cleaner when using the regmap_reg_range() macro.
The rohm-bd718x7.c is doing this open-coded initialization. It's not
really bad as there is only one range defined, but it is still worth
converting it to use the regmap_reg_range() so no-one uses it as a bad
example.
Additionally, the regmap_access_table expects a pointer to an array of
ranges. This is a tad more obvious when we use an array with single
range, instead of claiming a pointer to a range struct being a single
element array.
Use regmap_reg_range() when initializing the regmap_range structure and
use a real one-element array instead of a pointer to a struct.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/aP9hlpRO-0vmEHBZ@mva-rohm
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
To facilitate tracking the length, type, and outcome of the move extent,
add a trace point at both the entry and exit of mext_move_extent().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-13-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Pass the moving extent length into mext_folio_double_lock() so that it
can acquire a higher-order folio if the length exceeds PAGE_SIZE. This
can speed up extent moving when the extent is larger than one page.
Additionally, remove the unnecessary comments from
mext_folio_double_lock().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-12-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Now that we have mext_move_extent(), we can switch to this new interface
and deprecate move_extent_per_page(). First, after acquiring the
i_rwsem, we can directly use ext4_map_blocks() to obtain a contiguous
extent from the original inode as the extent to be moved. It can and
it's safe to get mapping information from the extent status tree without
needing to access the ondisk extent tree, because ext4_move_extent()
will check the sequence cookie under the folio lock. Then, after
populating the mext_data structure, we call ext4_move_extent() to move
the extent. Finally, the length of the extent will be adjusted in
mext.orig_map.m_len and the actual length moved is returned through
m_len.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-11-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When moving extents, the current move_extent_per_page() process can only
move extents of length PAGE_SIZE at a time, which is highly inefficient,
especially when the fragmentation of the file is not particularly
severe, this will result in a large number of unnecessary extent split
and merge operations. Moreover, since the ext4 file system now supports
large folios, using PAGE_SIZE as the processing unit is no longer
practical.
Therefore, introduce a new move extents method, mext_move_extent(). It
moves one extent of the origin inode at a time, but not exceeding the
size of a folio. The parameters for the move are passed through the new
mext_data data structure, which includes the origin inode, donor inode,
the mapping extent of the origin inode to be moved, and the starting
offset of the donor inode.
The move process is similar to move_extent_per_page() and can be
categorized into three types: MEXT_SKIP_EXTENT, MEXT_MOVE_EXTENT, and
MEXT_COPY_DATA. MEXT_SKIP_EXTENT indicates that the corresponding area
of the donor file is a hole, meaning no actual space is allocated, so
the move is skipped. MEXT_MOVE_EXTENT indicates that the corresponding
areas of both the origin and donor files are unwritten, so no data needs
to be copied; only the extents are swapped. MEXT_COPY_DATA indicates
that the corresponding areas of both the origin and donor files contain
data, so data must be copied. The data copying is performed in three
steps: first, the data from the original location is read into the page
cache; then, the extents are swapped, and the page cache is rebuilt to
reflect the index of the physical blocks; finally, the dirty page cache
is marked and written back to ensure that the data is written to disk
before the metadata is persisted.
One important point to note is that the folio lock and i_data_sem are
held only during the moving process. Therefore, before moving an extent,
it is necessary to check whether the sequence cookie of the area to be
moved has changed while holding the folio lock. If a change is detected,
it indicates that concurrent write-back operations may have occurred
during this period, and the type of the extent to be moved can no longer
be considered reliable. For example, it may have changed from unwritten
to written. In such cases, return -ESTALE, and the calling function
should reacquire the move extent of the original file and retry the
movement.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-10-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
mext_page_mkuptodate() no longer works on a single page, so rename it to
mext_folio_mkuptodate().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-9-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When moving extents, mext_check_validity() performs some basic file
system and file checks. However, some essential checks need to be
performed after acquiring the i_rwsem are still scattered in
mext_check_arguments(). Move those checks into mext_check_validity() and
make it executes entirely under the i_rwsem to make the checks clearer.
Furthermore, rename mext_check_arguments() to mext_check_adjust_range(),
as it only performs checks and length adjustments on the move extent
range. Finally, also change the print message for the non-existent file
check to be consistent with other unsupported checks.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-8-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently, the basic validation checks during the move extent operation
are scattered across __ext4_ioctl() and ext4_move_extents(), which makes
the code somewhat disorganized. Introduce a new helper,
mext_check_validity(), to handle these checks. This change involves only
code relocation without any logical modifications.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-7-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Switch to using EXT4_B_TO_LBLK() to calculate the EOF position of the
origin and donor inodes, instead of using open-coded calculations.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-6-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When creating or querying mapping blocks using the ext4_map_blocks() and
ext4_map_{query|create}_blocks() helpers, also pass out the extent
sequence number of the block mapping info through the ext4_map_blocks
structure. This sequence number can later serve as a valid cookie within
iomap infrastructure and the move extents procedure.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-5-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When querying extents in the extent status tree, we should hold the
data_sem if we want to obtain the sequence number as a valid cookie
simultaneously. However, currently, ext4_map_blocks() calls
ext4_es_lookup_extent() without holding data_sem. Therefore, we should
acquire i_es_lock instead, which also ensures that the sequence cookie
and the extent remain consistent. Consequently, make
ext4_es_lookup_extent() to pass out the sequence number when necessary.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-4-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In the iomap_write_iter(), the iomap buffered write frame does not hold
any locks between querying the inode extent mapping info and performing
page cache writes. As a result, the extent mapping can be changed due to
concurrent I/O in flight. Similarly, in the iomap_writepage_map(), the
write-back process faces a similar problem: concurrent changes can
invalidate the extent mapping before the I/O is submitted.
Therefore, both of these processes must recheck the mapping info after
acquiring the folio lock. To address this, similar to XFS, we propose
introducing an extent sequence number to serve as a validity cookie for
the extent. After commit 24b7a2331fcd ("ext4: clairfy the rules for
modifying extents"), we can ensure the extent information should always
be processed through the extent status tree, and the extent status tree
is always uptodate under i_rwsem or invalidate_lock or folio lock, so
it's safe to introduce this sequence number. The sequence number will be
increased whenever the extent status tree changes, preparing for the
buffered write iomap conversion.
Besides, this mechanism is also applicable for the moving extents case.
In move_extent_per_page(), it also needs to reacquire data_sem and check
the mapping info again under the folio lock.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-3-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The move extent operation should return -EOPNOTSUPP if any of the inodes
is a quota inode, rather than requiring both to be quota inodes.
Fixes: 02749a4c2082 ("ext4: add ext4_is_quota_file()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-2-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Sometimes VMs will have some intermittent dmesg warnings that are
unrelated to vsock. Change the dmesg parsing to filter on strings
containing 'vsock' to avoid false positive failures that are unrelated
to vsock. The downside is that it is possible for some vsock related
warnings to not contain the substring 'vsock', so those will be missed.
Fixes: a4a65c6fe08b ("selftests/vsock: add initial vmtest.sh for vsock")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251105-vsock-vmtest-dmesg-fix-v2-1-1a042a14892c@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the issue detected by the smatch tool.
fs/ext4/inode.c:3583 ext4_map_blocks_atomic_write_slow() error: uninitialized symbol 'next_pblk'.
fs/ext4/namei.c:1776 ext4_lookup() error: uninitialized symbol 'de'.
fs/ext4/namei.c:1829 ext4_get_parent() error: uninitialized symbol 'de'.
fs/ext4/namei.c:3162 ext4_rmdir() error: uninitialized symbol 'de'.
fs/ext4/namei.c:3242 __ext4_unlink() error: uninitialized symbol 'de'.
fs/ext4/namei.c:3697 ext4_find_delete_entry() error: uninitialized symbol 'de'.
These changes enhance code clarity, address static analysis tool errors.
Signed-off-by: Ranganath V N <vnranganath.20@gmail.com>
Message-ID: <20251011063830.47485-1-vnranganath.20@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently, for beacon_stats, ath12k_mac_get_fw_stats() is called
for each started BSS on the specified hardware.
ath12k_mac_get_fw_stats() will wait for the fw_stats_done completion
after fetching the requested data from firmware. For the beacon_stats,
fw_stats_done completion will be set only when stats are received for
all BSSes. However, for other stats like vdev_stats or pdev_stats, there
is one request to the firmware for all enabled BSSes. Since beacon_stats
is fetched individually for all BSSes enabled in that pdev, waiting for
the completion event results in a timeout error when multiple BSSes are
enabled.
Avoid this by completing the fw_stats_done immediately after
updating the requested BSS's beacon stats in the list. Subsequently,
this list will be used to display the beacon stats for all enabled
BSSes in the requested pdev.
Additionally, remove 'num_bcn_recvd' from the ath12k_fw_stats struct
as it is no longer needed.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 9fe4669ae919 ("wifi: ath12k: Request beacon stats from firmware")
Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031-beacon_stats-v1-2-f52fce7b03ac@qti.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, ath12k_fw_stats_reset() is called in
ath12k_mac_get_fw_stats() before fetching the required stats from the
firmware. However, ath12k_open_bcn_stats() requests firmware stats for
each enabled BSS individually. Since the firmware stats are reset before
fetching, only the last BSS's data is displayed.
Also, in ath12k_mac_op_get_txpower(), ath12k_mac_op_sta_statistics(), and
ath12k_mac_op_link_sta_statistics(), after getting the stats from the
firmware, the reset function is not called until the next firmware
stats are requested or while unloading the module. Hence, the stats buffer
will not be freed until one of the above sequences is executed. However,
in ath12k_open_vdev_stats(), ath12k_open_bcn_stats() and
ath12k_open_pdev_stats(), firmware stats are reset after copying the
necessary data in ath12k_wmi_fw_stats_dump().
This leads to inconsistent usage of ath12k_fw_stats_reset() for
freeing the firmware stats.
Avoid these discrepancies by making it the caller's responsibility to
free the stats buffer, thereby removing the need to free the stats buffer
in ath12k_mac_get_fw_stats() and ath12k_wmi_fw_stats_dump().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031-beacon_stats-v1-1-f52fce7b03ac@qti.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently __ext4fs_dirhash() returns -1 (-EPERM) if fscrypt doesn't
have encryption key, which may confuse users. Make the error code here
consistent with existing error code.
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Message-ID: <20251010095257.3008275-1-sunjunchao@bytedance.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Nikolay Aleksandrov says:
====================
net: bridge: fix two MST bugs
Patch 01 fixes a race condition that exists between expired fdb deletion
and port deletion when MST is enabled. Learning can happen after the
port's state has been changed to disabled which could lead to that
port's memory being used after it's been freed. The issue was reported
by syzbot, more information in patch 01. Patch 02 fixes an issue with
MST's static key which Ido spotted, we can have multiple bridges with MST
and a single bridge can erroneously disable it for all.
====================
Link: https://patch.msgid.link/20251105111919.1499702-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As Ido pointed out, the static key usage in MST is buggy and should use
inc/dec instead of enable/disable because we can have multiple bridges
with MST enabled which means a single bridge can disable MST for all.
Use static_branch_inc/dec to avoid that. When destroying a bridge decrement
the key if MST was enabled.
Fixes: ec7328b59176 ("net: bridge: mst: Multiple Spanning Tree (MST) mode")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Closes: https://lore.kernel.org/netdev/20251104120313.1306566-1-razor@blackwall.org/T/#m6888d87658f94ed1725433940f4f4ebb00b5a68b
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251105111919.1499702-3-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported[1] a use-after-free when deleting an expired fdb. It is
due to a race condition between learning still happening and a port being
deleted, after all its fdbs have been flushed. The port's state has been
toggled to disabled so no learning should happen at that time, but if we
have MST enabled, it will bypass the port's state, that together with VLAN
filtering disabled can lead to fdb learning at a time when it shouldn't
happen while the port is being deleted. VLAN filtering must be disabled
because we flush the port VLANs when it's being deleted which will stop
learning. This fix adds a check for the port's vlan group which is
initialized to NULL when the port is getting deleted, that avoids the port
state bypass. When MST is enabled there would be a minimal new overhead
in the fast-path because the port's vlan group pointer is cache-hot.
[1] https://syzkaller.appspot.com/bug?extid=dd280197f0f7ab3917be
Fixes: ec7328b59176 ("net: bridge: mst: Multiple Spanning Tree (MST) mode")
Reported-by: syzbot+dd280197f0f7ab3917be@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69088ffa.050a0220.29fc44.003d.GAE@google.com/
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251105111919.1499702-2-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The following warning was seen when we try to connect using ssh to the device.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:575
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 104, name: dropbear
preempt_count: 1, expected: 0
INFO: lockdep is turned off.
CPU: 0 UID: 0 PID: 104 Comm: dropbear Tainted: G W 6.18.0-rc2-00399-g6f1ab1b109b9-dirty #530 NONE
Tainted: [W]=WARN
Hardware name: Generic DT based system
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x7c/0xac
dump_stack_lvl from __might_resched+0x16c/0x2b0
__might_resched from __mutex_lock+0x64/0xd34
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from lan966x_stats_get+0x5c/0x558
lan966x_stats_get from dev_get_stats+0x40/0x43c
dev_get_stats from dev_seq_printf_stats+0x3c/0x184
dev_seq_printf_stats from dev_seq_show+0x10/0x30
dev_seq_show from seq_read_iter+0x350/0x4ec
seq_read_iter from seq_read+0xfc/0x194
seq_read from proc_reg_read+0xac/0x100
proc_reg_read from vfs_read+0xb0/0x2b0
vfs_read from ksys_read+0x6c/0xec
ksys_read from ret_fast_syscall+0x0/0x1c
Exception stack(0xf0b11fa8 to 0xf0b11ff0)
1fa0: 00000001 00001000 00000008 be9048d8 00001000 00000001
1fc0: 00000001 00001000 00000008 00000003 be905920 0000001e 00000000 00000001
1fe0: 0005404c be9048c0 00018684 b6ec2cd8
It seems that we are using a mutex in a atomic context which is wrong.
Change the mutex with a spinlock.
Fixes: 12c2d0a5b8e2 ("net: lan966x: add ethtool configuration and statistics")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251105074955.1766792-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When reporting tx completion using ieee80211_tx_status_xxx() family of
functions, the status part of the struct ieee80211_tx_info nested in the
skb is used to report things like transmit rates & retry count to mac80211
On the TX data path, this is correctly memset to 0 before calling
ieee80211_tx_status_ext(), but on the tx mgmt path this was not done.
This leads to mac80211 treating garbage values as valid transmit counters
(like tx retries for example) and accounting them as real statistics that
makes their way to userland via station dump.
The same issue was resolved in ath12k by commit 9903c0986f78 ("wifi:
ath12k: Add memset and update default rate value in wmi tx completion")
Tested-on: QCN9074 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251104083957.717825-1-nico.escande@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Liang reported an issue where setting a slave’s actor_port_prio to
predefined values such as 0, 255, or 65535 would cause a system crash.
The problem occurs because in bond_opt_parse(), when the provided value
matches a predefined table entry, the function returns that table entry,
which does not contain slave information. Later, in
bond_option_actor_port_prio_set(), calling bond_slave_get_rtnl() leads
to a NULL pointer dereference.
Since actor_port_prio is defined as a u16 and initialized to the default
value of 255 in ad_initialize_port(), there is no need for the
bond_actor_port_prio_tbl. Using the BOND_OPTFLAG_RAWVAL flag is sufficient.
Fixes: 6b6dc81ee7e8 ("bonding: add support for per-port LACP actor priority")
Reported-by: Liang Li <liali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251105072620.164841-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ9477/KSZ9897 and LAN937X families of switches use a reserved multicast
address table for some specific forwarding with some multicast addresses,
like the one used in STP. The hardware assumes the host port is the last
port in KSZ9897 family and port 5 in LAN937X family. Most of the time
this assumption is correct but not in other cases like KSZ9477.
Originally the function just setups the first entry, but the others still
need update, especially for one common multicast address that is used by
PTP operation.
LAN937x also uses different register bits when accessing the reserved
table.
Fixes: 457c182af597 ("net: dsa: microchip: generic access to ksz9477 static and reserved table")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Tested-by: Łukasz Majewski <lukma@nabladev.com>
Link: https://patch.msgid.link/20251105033741.6455-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update default power1_cap to max limit for smu_v13_0_6 and smu_v13_0_12
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Only update bad page number in legacy eeprom write path.
v2: add null pointer check for con.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
drm_dp_mst_topology_queue_probe() is used under the assumption that
mst is already initialized. If we connect system with SST first
then switch to the mst branch during suspend, we will fail probing
topology by calling the wrong API since the mst manager is yet to
be initialized.
[How]
At dm_resume(), once it's detected as mst branc connected, check if
the mst is initialized already. If not, call
dm_helpers_dp_mst_start_top_mgr() instead to initialize mst
V2: Adjust the commit msg a bit
Fixes: bc068194f548 ("drm/amd/display: Don't write DP_MSTM_CTRL after LT")
Cc: Fangzhi Zuo <jerry.zuo@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
PMFW manages eeprom bad page records, update bad page loading
accrodingly.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For a mode-1 reset done at the end of S3 on PSPv11 dGPUs, only check if
TOS is unloaded.
Fixes: 32f73741d6ee ("drm/amdgpu: Wait for bootloader after PSPv11 reset")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4649
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
PMFW will manage RAS eeprom data by itself, add new interface to read
eeprom data via PMFW, we can read part of records by setting index.
v2: use IPID parse interface.
pa is not used and set it to a fixed value.
v3: optimize the null pointer check for IPID parse interface.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So we can call it in other blocks.
v2: add a new IPID parse interface for umc and we can
implement it for each ASIC.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
commit c760bcda83571 ("drm/amd: Check whether secure display TA loaded
successfully") attempted to fix extra messages, but failed to port the
cleanup that was in commit 5c6d52ff4b61e ("drm/amd: Don't try to enable
secure display TA multiple times") to prevent multiple tries.
Add that to the failure handling path even on a quick failure.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4679
Fixes: c760bcda8357 ("drm/amd: Check whether secure display TA loaded successfully")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When amdgpu_device_health_check fails, amdgpu_ras_pre_reset
will not be called and therefore amdgpu_ras_post_reset
cannot be called either.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On PF passthrough environment, after hibernate and then resume, coralgemm
will cause gpu page fault.
Mode1 reset happens during hibernate, but partition mode is not restored
on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right
after resume. When CP access the MQD BO, wrong stride size is used,
this will cause out of bound access on the MQD BO, resulting page fault.
The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called
when resume from a hibernation.
KFD resume is called separately during a reset recovery or resume from
suspend sequence. Hence it's not required to be called as part of
partition switch.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ras supports i2c eeprom for mp1 v13_0_12.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch adds the condition to not wait for
the queue response for unmap, if the gpu is in reset.
Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
unref bo after amdgpu_bo_reserve() failure as it has
called amdgpu_bo_ref() already
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
initialize max record count and record offset after table reset
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
get and check the pmfw eeprom feature bit to
decide if pmfw eeprom is supported
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add check function for pmfw eeprom
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
