| Age | Commit message (Collapse) | Author |
|---|
|
Add a regression test for setns() with pidfd.
Link: https://patch.msgid.link/20251109-namespace-6-19-fixes-v1-7-ae8a4ad5a3b3@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a few more assert to detect active reference count underflows.
Link: https://patch.msgid.link/20251109-namespace-6-19-fixes-v1-6-ae8a4ad5a3b3@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The setns() system call supports:
(1) namespace file descriptors (nsfd)
(2) process file descriptors (pidfd)
When using nsfds the namespaces will remain active because they are
pinned by the vfs. However, when pidfds are used things are more
complicated.
When the target task exits and passes through exit_nsproxy_namespaces()
or is reaped and thus also passes through exit_cred_namespaces() after
the setns()'ing task has called prepare_nsset() but before the active
reference count of the set of namespaces it wants to setns() to might
have been dropped already:
P1 P2
pid_p1 = clone(CLONE_NEWUSER | CLONE_NEWNET | CLONE_NEWNS)
pidfd = pidfd_open(pid_p1)
setns(pidfd, CLONE_NEWUSER | CLONE_NEWNET | CLONE_NEWNS)
prepare_nsset()
exit(0)
// ns->__ns_active_ref == 1
// parent_ns->__ns_active_ref == 1
-> exit_nsproxy_namespaces()
-> exit_cred_namespaces()
// ns_active_ref_put() will also put
// the reference on the owner of the
// namespace. If the only reason the
// owning namespace was alive was
// because it was a parent of @ns
// it's active reference count now goes
// to zero... --------------------------------
// |
// ns->__ns_active_ref == 0 |
// parent_ns->__ns_active_ref == 0 |
| commit_nsset()
-----------------> // If setns()
// now manages to install the namespaces
// it will call ns_active_ref_get()
// on them thus bumping the active reference
// count from zero again but without also
// taking the required reference on the owner.
// Thus we get:
//
// ns->__ns_active_ref == 1
// parent_ns->__ns_active_ref == 0
When later someone does ns_active_ref_put() on @ns it will underflow
parent_ns->__ns_active_ref leading to a splat from our asserts
thinking there are still active references when in fact the counter
just underflowed.
So resurrect the ownership chain if necessary as well. If the caller
succeeded to grab passive references to the set of namespaces the
setns() should simply succeed even if the target task exists or gets
reaped in the meantime and thus has dropped all active references to its
namespaces.
The race is rare and can only be triggered when using pidfs to setns()
to namespaces. Also note that active reference on initial namespaces are
nops.
Since we now always handle parent references directly we can drop
ns_ref_active_get_owner() when adding a namespace to a namespace tree.
This is now all handled uniformly in the places where the new namespaces
actually become active.
Link: https://patch.msgid.link/20251109-namespace-6-19-fixes-v1-5-ae8a4ad5a3b3@kernel.org
Fixes: 3c9820d5c64a ("ns: add active reference count")
Reported-by: syzbot+1957b26299cf3ff7890c@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Don't return EINVAL, return EFAULT just like we do in other system
calls.
Link: https://patch.msgid.link/20251109-namespace-6-19-fixes-v1-4-ae8a4ad5a3b3@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The mount namespace may in fact sleep when putting the last passive
reference so we need to drop the namespace reference outside of the rcu
read lock. Do this by delaying the put until the next iteration where
we've already moved on to the next namespace and legitimized it. Once we
drop the rcu read lock to call put_user() we will also drop the
reference to the previous namespace in the tree.
Link: https://patch.msgid.link/20251109-namespace-6-19-fixes-v1-3-ae8a4ad5a3b3@kernel.org
Fixes: 76b6f5dfb3fd ("nstree: add listns()")
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There's no need to bump the active reference counts of initial
namespaces as they're always active and can simply remain at 1.
Link: https://patch.msgid.link/20251109-namespace-6-19-fixes-v1-2-ae8a4ad5a3b3@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Don't skip active reference count initialization for initial namespaces.
Doing this will break network namespace active reference counting.
Link: https://patch.msgid.link/20251109-namespace-6-19-fixes-v1-1-ae8a4ad5a3b3@kernel.org
Fixes: 3a18f809184b ("ns: add active reference count")
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Invariants should be prefixed with a # to turn it into a header.
There are no functional changes in this patch.
Cc: stable@vger.kernel.org
Fixes: c284d3e42338 ("rust: drm: gem: Add GEM object abstraction")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251107202603.465932-1-lyude@redhat.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
All the feature enabling code is in place - drop the debug flag
requirement for VF resource fixup.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251107161000.1938186-1-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
The LXA device trees are the only STM32MP1 device tree that specify
vusb_d/usb_a-supply and apparently not for good reason:
- vusb_d-supply (vdd_usb) is the same as the phy-supply for usbphyc_port1
- vusb_a-supply (reg18) is the same as vdda1v8-supply for usbphyc_port1
and usbphyc_port1 is linked to the usbotg_hs node via the phys property.
Specifying the regulators in the &usbotg_hs node is thus superfluous and
has been even found to be harmful in one instance:
Linux v6.10 was found to lock up every 50-125 or so reboots on the LXA
TAC when the DWC2 driver probe enables the regulators in bulk, unless
both properties were removed.
This issue was so far not reproducible on v6.17 (> 500 reboots), but as
these properties are unnecessary and different from other STM32MP1
boards, remove them anyway.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20251007-lxa-usb-dt-v1-1-cacde8088bb9@pengutronix.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Fix kernel-doc warnings so that there no other kernel-doc issues
in <uapi/linux/tee.h>:
- add ending ':' to some struct members as needed for kernel-doc
- change struct name in kernel-doc to match the actual struct name (2x)
- add a @params: kernel-doc entry multiple times
Warning: tee.h:265 struct member 'ret_origin' not described
in 'tee_ioctl_open_session_arg'
Warning: tee.h:265 struct member 'num_params' not described
in 'tee_ioctl_open_session_arg'
Warning: tee.h:265 struct member 'params' not described
in 'tee_ioctl_open_session_arg'
Warning: tee.h:351 struct member 'num_params' not described
in 'tee_iocl_supp_recv_arg'
Warning: tee.h:351 struct member 'params' not described
in 'tee_iocl_supp_recv_arg'
Warning: tee.h:372 struct member 'num_params' not described
in 'tee_iocl_supp_send_arg'
Warning: tee.h:372 struct member 'params' not described
in 'tee_iocl_supp_send_arg'
Warning: tee.h:298: expecting prototype for struct
tee_ioctl_invoke_func_arg. Prototype was for
struct tee_ioctl_invoke_arg instead
Warning: tee.h:473: expecting prototype for struct
tee_ioctl_invoke_func_arg. Prototype was for struct
tee_ioctl_object_invoke_arg instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Move st,adc-freq, st,mod-12b, st,ref-sel, and st,sample-time properties
from the touchscreen subnode to the parent touch@44 node. These properties
are defined in the st,stmpe.yaml schema for the parent node, not the
touchscreen subnode, resolving the validation error about unevaluated
properties.
Fixes: 27538a18a4fcc ("ARM: dts: stm32: add STM32MP1-based Phytec SoM")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250915224611.169980-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
After device_initialize() is called, use put_device() to release the
device according to kernel device management rules. While direct
kfree() work in this case, using put_device() is more correct.
Found by code review.
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20251110005158.13394-1-make24@iscas.ac.cn
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The CSI-2 receivers in the i.MX8MP have 3 output channels. Specify this
in the device tree, to enable support for more than one channel.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20251106162430.328701-1-marco.crivellari@suse.com
|
|
The behavior of weak terms is subtle, add a test that they aren't
accidentally broken. The test finds an event with a weak 'period' and
then overrides it. In no such event is present then the test skips.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The terms for a json event should be weak so they don't override
command line options.
Before:
```
$ perf record -vv -c 1000 -e uops_issued.any -o /dev/null true 2>&1
|grep "{ sample_period, sample_freq }"
{ sample_period, sample_freq } 200003
{ sample_period, sample_freq } 2000003
{ sample_period, sample_freq } 1000
```
After:
```
$ perf record -vv -c 1000 -e uops_issued.any -o /dev/null true 2>&1
|grep "{ sample_period, sample_freq }"
{ sample_period, sample_freq } 1000
{ sample_period, sample_freq } 1000
{ sample_period, sample_freq } 1000
```
Fixes: 84bae3af20d0 ("perf pmu: Don't eagerly parse event terms")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Currently altera_cvp_probe() open-codes pci_find_vsec_capability().
Refactor the former to use the latter.
With that done:
- use the VSEC ID as per datasheet [1]
- update the error message accordingly
Link: https://www.intel.com/content/www/us/en/docs/programmable/683763/23-1/vendor-specific-header-register.html [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251109201729.3220460-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
|
|
The link is giving the 404 error, so use the correct link for the
documents
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251101190848.24271-1-dinguyen@kernel.org
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
|
|
The "xlnx,fpga-slave-serial" devicetree compatible string currently misses
its SPI device ID entry. Without an spi_device_id table, the driver still
works with device tree, but triggers the following runtime warning when
registered via SPI core:
SPI driver xlnx-slave-spi has no spi_device_id for xlnx,fpga-slave-serial
Fix it by adding a corresponding spi_device_id table entry.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20251026110237.986279-1-festevam@gmail.com
[ Yilun: Remove extra whitespaces ]
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
|
|
First of all, the driver was parsing the 'dbi' register region as 'elbi'.
This was due to DT mistakenly passing 'dbi' as 'elbi'. Since the DT is
now fixed to supply 'dbi' region, this driver can rely on the DWC core
driver to parse and map it.
However, to support the old DTs, if the 'elbi' region is found in DT, parse
and map the region as both 'dw_pcie::elbi_base' as 'dw_pcie::dbi_base'.
This will allow the driver to work with both broken and fixed DTs.
Also, skip parsing the 'elbi' region in DWC core if 'pci->elbi_base' was
already populated.
Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Fixes: c96992a24bec ("PCI: dwc: Add support for ELBI resource mapping")
Reported-by: Linnaea Lavia <linnaea-von-lavia@live.com>
Closes: https://lore.kernel.org/linux-pci/DM4PR05MB102707B8CDF84D776C39F22F2C7F0A@DM4PR05MB10270.namprd05.prod.outlook.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on Bananapi-M2S
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Cc: stable@vger.kernel.org # 6.2
Link: https://patch.msgid.link/20251101-pci-meson-fix-v1-3-c50dcc56ed6a@oss.qualcomm.com
|
|
Binding incorrectly specifies the 'DBI' region as 'ELBI'. DBI is a must
have region for DWC controllers as it has the Root Port and controller
specific registers, while ELBI has optional registers.
Hence, fix the binding. Though this is an ABI break, this change is needed
to accurately describe the PCI memory map.
Fixes: 7cd210391101 ("dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251101-pci-meson-fix-v1-1-c50dcc56ed6a@oss.qualcomm.com
|
|
After unbinding the driver, another kthread `cros_ec_console_log_work`
is still accessing the device, resulting an UAF and crash.
The driver doesn't unregister the EC device in .remove() which should
shutdown sub-devices synchronously. Fix it.
Fixes: 26a14267aff2 ("platform/chrome: Add ChromeOS EC ISHTP driver")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20251031033900.3577394-1-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Calling __kho_unpreserve() on a pair of (pfn, end_pfn) that wasn't
preserved is a bug. Currently, if that is done, the physxa or bits can be
NULL. This results in a soft lockup since a NULL physxa or bits results
in redoing the loop without ever making any progress.
Return when physxa or bits are not found, but WARN first to loudly
indicate invalid behaviour.
Link: https://lkml.kernel.org/r/20251103180235.71409-3-pratyush@kernel.org
Fixes: fc33e4b44b27 ("kexec: enable KHO support for memory preservation")
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kho_vmalloc_unpreserve_chunk() calls __kho_unpreserve() with end_pfn as
pfn + 1. This happens to work for 0-order pages, but leaks higher order
pages.
For example, say order 2 pages back the allocation. During preservation,
they get preserved in the order 2 bitmaps, but
kho_vmalloc_unpreserve_chunk() would try to unpreserve them from the order
0 bitmaps, which should not have these bits set anyway, leaving the order
2 bitmaps untouched. This results in the pages being carried over to the
next kernel. Nothing will free those pages in the next boot, leaking
them.
Fix this by taking the order into account when calculating the end PFN for
__kho_unpreserve().
Link: https://lkml.kernel.org/r/20251103180235.71409-2-pratyush@kernel.org
Fixes: a667300bd53f ("kho: add support for preserving vmalloc allocations")
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The list of pages in a vmalloc chunk is NULL-terminated. So when looping
through the pages in a vmalloc chunk, both kho_restore_vmalloc() and
kho_vmalloc_unpreserve_chunk() rightly make sure to stop when encountering
a NULL page. But when the chunk is full, the loops do not stop and go
past the bounds of chunk->phys, resulting in out-of-bounds memory access,
and possibly the restoration or unpreservation of an invalid page.
Fix this by making sure the processing of chunk stops at the end of the
array.
Link: https://lkml.kernel.org/r/20251103110159.8399-1-pratyush@kernel.org
Fixes: a667300bd53f ("kho: add support for preserving vmalloc allocations")
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We have been collaborating on a systematic effort to clean up and improve
the Linux swap system, and might as well take responsibility for it.
Link: https://lkml.kernel.org/r/20251102-swap-m-v1-1-582f275d5bce@kernel.org
Signed-off-by: Chris Li <chrisl@kernel.org>
Acked-by: Kairui Song <kasong@tencent.com>
Acked-by: Barry Song <baohua@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When a page fault occurs in a secret memory file created with
`memfd_secret(2)`, the kernel will allocate a new folio for it, mark the
underlying page as not-present in the direct map, and add it to the file
mapping.
If two tasks cause a fault in the same page concurrently, both could end
up allocating a folio and removing the page from the direct map, but only
one would succeed in adding the folio to the file mapping. The task that
failed undoes the effects of its attempt by (a) freeing the folio again
and (b) putting the page back into the direct map. However, by doing
these two operations in this order, the page becomes available to the
allocator again before it is placed back in the direct mapping.
If another task attempts to allocate the page between (a) and (b), and the
kernel tries to access it via the direct map, it would result in a
supervisor not-present page fault.
Fix the ordering to restore the direct map before the folio is freed.
Link: https://lkml.kernel.org/r/20251031120955.92116-1-lance.yang@linux.dev
Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas")
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Reported-by: Google Big Sleep <big-sleep-vuln-reports@google.com>
Closes: https://lore.kernel.org/linux-mm/CAEXGt5QeDpiHTu3K9tvjUTPqo+d-=wuCNYPa+6sWKrdQJ-ATdg@mail.gmail.com/
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On arm64 with MTE enabled, a page mapped as Normal Tagged (PROT_MTE) in
user space will need to have its allocation tags initialised. This is
normally done in the arm64 set_pte_at() after checking the memory
attributes. Such page is also marked with the PG_mte_tagged flag to avoid
subsequent clearing. Since this relies on having a struct page,
pte_special() mappings are ignored.
Commit d82d09e48219 ("mm/huge_memory: mark PMD mappings of the huge zero
folio special") maps the huge zero folio special and the arm64
set_pmd_at() will no longer zero the tags. There is no guarantee that the
tags are zero, especially if parts of this huge page have been previously
tagged.
It's fairly easy to detect this by regularly dropping the caches to
force the reallocation of the huge zero folio.
Allocate the huge zero folio with the __GFP_ZEROTAGS flag. In addition,
do not warn in the arm64 __access_remote_tags() when reading tags from the
huge zero page.
I bundled the arm64 change in here as well since they are both related to
the commit mapping the huge zero folio as special.
[catalin.marinas@arm.com: handle arch mte_zero_clear_page_tags() code issuing MTE instructions]
Link: https://lkml.kernel.org/r/aQi8dA_QpXM8XqrE@arm.com
Link: https://lkml.kernel.org/r/20251031170133.280742-1-catalin.marinas@arm.com
Fixes: d82d09e48219 ("mm/huge_memory: mark PMD mappings of the huge zero folio special")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Tested-by: Beleswar Padhi <b-padhi@ti.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Because kthread_stop did not stop sc_task properly and returned -EINTR,
the sc_timer was not properly closed, ultimately causing the problem [1]
reported by syzbot when freeing sci due to the sc_timer not being closed.
Because the thread sc_task main function nilfs_segctor_thread() returns 0
when it succeeds, when the return value of kthread_stop() is not 0 in
nilfs_segctor_destroy(), we believe that it has not properly closed
sc_timer.
We use timer_shutdown_sync() to sync wait for sc_timer to shutdown, and
set the value of sc_task to NULL under the protection of lock
sc_state_lock, so as to avoid the issue caused by sc_timer not being
properly shutdowned.
[1]
ODEBUG: free active (active state 0) object: 00000000dacb411a object type: timer_list hint: nilfs_construction_timeout
Call trace:
nilfs_segctor_destroy fs/nilfs2/segment.c:2811 [inline]
nilfs_detach_log_writer+0x668/0x8cc fs/nilfs2/segment.c:2877
nilfs_put_super+0x4c/0x12c fs/nilfs2/super.c:509
Link: https://lkml.kernel.org/r/20251029225226.16044-1-konishi.ryusuke@gmail.com
Fixes: 3f66cc261ccb ("nilfs2: use kthread_create and kthread_stop for the log writer thread")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+24d8b70f039151f65590@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=24d8b70f039151f65590
Tested-by: syzbot+24d8b70f039151f65590@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Cc: <stable@vger.kernel.org> [6.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Support for parsing PC source info in stacktraces (e.g. '(P)') was added
in commit 2bff77c665ed ("scripts/decode_stacktrace.sh: fix decoding of
lines with an additional info"). However, this logic was placed after the
build ID processing. This incorrect order fails to parse lines containing
both elements, e.g.:
drm_gem_mmap_obj+0x114/0x200 [drm 03d0564e0529947d67bb2008c3548be77279fd27] (P)
This patch fixes the problem by extracting the PC source info first and
then processing the module build ID. With this change, the line above is
now properly parsed as such:
drm_gem_mmap_obj (./include/linux/mmap_lock.h:212 ./include/linux/mm.h:811 drivers/gpu/drm/drm_gem.c:1177) drm (P)
While here, also add a brief explanation the build ID section.
Link: https://lkml.kernel.org/r/20251030010347.2731925-1-cmllamas@google.com
Fixes: 2bff77c665ed ("scripts/decode_stacktrace.sh: fix decoding of lines with an additional info")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Puranjay Mohan <puranjay@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In DAMON's damon_sysfs_repeat_call_fn(), time_before() is used to compare
the current jiffies with next_update_jiffies to determine whether to
update the sysfs files at this moment.
On 32-bit systems, the kernel initializes jiffies to "-5 minutes" to make
jiffies wrap bugs appear earlier. However, this causes time_before() in
damon_sysfs_repeat_call_fn() to unexpectedly return true during the first
5 minutes after boot on 32-bit systems (see [1] for more explanation,
which fixes another jiffies-related issue before). As a result, DAMON
does not update sysfs files during that period.
There is also an issue unrelated to the system's word size[2]: if the
user stops DAMON just after next_update_jiffies is updated and restarts
it after 'refresh_ms' or a longer delay, next_update_jiffies will retain
an older value, causing time_before() to return false and the update to
happen earlier than expected.
Fix these issues by making next_update_jiffies a global variable and
initializing it each time DAMON is started.
Link: https://lkml.kernel.org/r/20251030020746.967174-3-yanquanmin1@huawei.com
Link: https://lkml.kernel.org/r/20250822025057.1740854-1-ekffu200098@gmail.com [1]
Link: https://lore.kernel.org/all/20251029013038.66625-1-sj@kernel.org/ [2]
Fixes: d809a7c64ba8 ("mm/damon/sysfs: implement refresh_ms file internal work")
Suggested-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: ze zuo <zuoze1@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon: fixes for the jiffies-related issues", v2.
On 32-bit systems, the kernel initializes jiffies to "-5 minutes" to make
jiffies wrap bugs appear earlier. However, this may cause the
time_before() series of functions to return unexpected values, resulting
in DAMON not functioning as intended. Meanwhile, similar issues exist in
some specific user operation scenarios.
This patchset addresses these issues. The first patch is about the
DAMON_STAT module, and the second patch is about the core layer's sysfs.
This patch (of 2):
In DAMON_STAT's damon_stat_damon_call_fn(), time_before_eq() is used to
avoid unnecessarily frequent stat update.
On 32-bit systems, the kernel initializes jiffies to "-5 minutes" to make
jiffies wrap bugs appear earlier. However, this causes time_before_eq()
in DAMON_STAT to unexpectedly return true during the first 5 minutes after
boot on 32-bit systems (see [1] for more explanation, which fixes another
jiffies-related issue before). As a result, DAMON_STAT does not update
any monitoring results during that period, which becomes more confusing
when DAMON_STAT_ENABLED_DEFAULT is enabled.
There is also an issue unrelated to the system's word size[2]: if the user
stops DAMON_STAT just after last_refresh_jiffies is updated and restarts
it after 5 seconds or a longer delay, last_refresh_jiffies will retain an
older value, causing time_before_eq() to return false and the update to
happen earlier than expected.
Fix these issues by making last_refresh_jiffies a global variable and
initializing it each time DAMON_STAT is started.
Link: https://lkml.kernel.org/r/20251030020746.967174-2-yanquanmin1@huawei.com
Link: https://lkml.kernel.org/r/20250822025057.1740854-1-ekffu200098@gmail.com [1]
Link: https://lore.kernel.org/all/20251028143250.50144-1-sj@kernel.org/ [2]
Fixes: fabdd1e911da ("mm/damon/stat: calculate and expose estimated memory bandwidth")
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Suggested-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: ze zuo <zuoze1@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
maple_tree tracepoints contain pointers to function names. Such a pointer
is saved when a tracepoint logs an event. There's no guarantee that it's
still valid when the event is parsed later and the pointer is dereferenced.
The kernel warns about these unsafe pointers.
event 'ma_read' has unsafe pointer field 'fn'
WARNING: kernel/trace/trace.c:3779 at ignore_event+0x1da/0x1e4
Mark the function names as tracepoint_string() to fix the events.
One case that doesn't work without my patch would be trace-cmd record
to save the binary ringbuffer and trace-cmd report to parse it in
userspace. The address of __func__ can't be dereferenced from
userspace but tracepoint_string will add an entry to
/sys/kernel/tracing/printk_formats
Link: https://lkml.kernel.org/r/20251030155537.87972-1-martin@kaiser.cx
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
slabobj_ext
When alloc_slab_obj_exts() fails and then later succeeds in allocating a
slab extension vector, it calls handle_failed_objexts_alloc() to mark all
objects in the vector as empty. As a result all objects in this slab
(slabA) will have their extensions set to CODETAG_EMPTY.
Later on if this slabA is used to allocate a slabobj_ext vector for
another slab (slabB), we end up with the slabB->obj_exts pointing to a
slabobj_ext vector that itself has a non-NULL slabobj_ext equal to
CODETAG_EMPTY. When slabB gets freed, free_slab_obj_exts() is called to
free slabB->obj_exts vector.
free_slab_obj_exts() calls mark_objexts_empty(slabB->obj_exts) which will
generate a warning because it expects slabobj_ext vectors to have a NULL
obj_ext, not CODETAG_EMPTY.
Modify mark_objexts_empty() to skip the warning and setting the obj_ext
value if it's already set to CODETAG_EMPTY.
To quickly detect this WARN, I modified the code from
WARN_ON(slab_exts[offs].ref.ct) to BUG_ON(slab_exts[offs].ref.ct == 1);
We then obtained this message:
[21630.898561] ------------[ cut here ]------------
[21630.898596] kernel BUG at mm/slub.c:2050!
[21630.898611] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[21630.900372] Modules linked in: squashfs isofs vfio_iommu_type1
vhost_vsock vfio vhost_net vmw_vsock_virtio_transport_common vhost tap
vhost_iotlb iommufd vsock binfmt_misc nfsv3 nfs_acl nfs lockd grace
netfs tls rds dns_resolver tun brd overlay ntfs3 exfat btrfs
blake2b_generic xor xor_neon raid6_pq loop sctp ip6_udp_tunnel
udp_tunnel nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib
nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct
nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4
nf_tables rfkill ip_set sunrpc vfat fat joydev sg sch_fq_codel nfnetlink
virtio_gpu sr_mod cdrom drm_client_lib virtio_dma_buf drm_shmem_helper
drm_kms_helper drm ghash_ce backlight virtio_net virtio_blk virtio_scsi
net_failover virtio_console failover virtio_mmio dm_mirror
dm_region_hash dm_log dm_multipath dm_mod fuse i2c_dev virtio_pci
virtio_pci_legacy_dev virtio_pci_modern_dev virtio virtio_ring autofs4
aes_neon_bs aes_ce_blk [last unloaded: hwpoison_inject]
[21630.909177] CPU: 3 UID: 0 PID: 3787 Comm: kylin-process-m Kdump:
loaded Tainted: G W 6.18.0-rc1+ #74 PREEMPT(voluntary)
[21630.910495] Tainted: [W]=WARN
[21630.910867] Hardware name: QEMU KVM Virtual Machine, BIOS unknown
2/2/2022
[21630.911625] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[21630.912392] pc : __free_slab+0x228/0x250
[21630.912868] lr : __free_slab+0x18c/0x250[21630.913334] sp :
ffff8000a02f73e0
[21630.913830] x29: ffff8000a02f73e0 x28: fffffdffc43fc800 x27:
ffff0000c0011c40
[21630.914677] x26: ffff0000c000cac0 x25: ffff00010fe5e5f0 x24:
ffff000102199b40
[21630.915469] x23: 0000000000000003 x22: 0000000000000003 x21:
ffff0000c0011c40
[21630.916259] x20: fffffdffc4086600 x19: fffffdffc43fc800 x18:
0000000000000000
[21630.917048] x17: 0000000000000000 x16: 0000000000000000 x15:
0000000000000000
[21630.917837] x14: 0000000000000000 x13: 0000000000000000 x12:
ffff70001405ee66
[21630.918640] x11: 1ffff0001405ee65 x10: ffff70001405ee65 x9 :
ffff800080a295dc
[21630.919442] x8 : ffff8000a02f7330 x7 : 0000000000000000 x6 :
0000000000003000
[21630.920232] x5 : 0000000024924925 x4 : 0000000000000001 x3 :
0000000000000007
[21630.921021] x2 : 0000000000001b40 x1 : 000000000000001f x0 :
0000000000000001
[21630.921810] Call trace:
[21630.922130] __free_slab+0x228/0x250 (P)
[21630.922669] free_slab+0x38/0x118
[21630.923079] free_to_partial_list+0x1d4/0x340
[21630.923591] __slab_free+0x24c/0x348
[21630.924024] ___cache_free+0xf0/0x110
[21630.924468] qlist_free_all+0x78/0x130
[21630.924922] kasan_quarantine_reduce+0x114/0x148
[21630.925525] __kasan_slab_alloc+0x7c/0xb0
[21630.926006] kmem_cache_alloc_noprof+0x164/0x5c8
[21630.926699] __alloc_object+0x44/0x1f8
[21630.927153] __create_object+0x34/0xc8
[21630.927604] kmemleak_alloc+0xb8/0xd8
[21630.928052] kmem_cache_alloc_noprof+0x368/0x5c8
[21630.928606] getname_flags.part.0+0xa4/0x610
[21630.929112] getname_flags+0x80/0xd8
[21630.929557] vfs_fstatat+0xc8/0xe0
[21630.929975] __do_sys_newfstatat+0xa0/0x100
[21630.930469] __arm64_sys_newfstatat+0x90/0xd8
[21630.931046] invoke_syscall+0xd4/0x258
[21630.931685] el0_svc_common.constprop.0+0xb4/0x240
[21630.932467] do_el0_svc+0x48/0x68
[21630.932972] el0_svc+0x40/0xe0
[21630.933472] el0t_64_sync_handler+0xa0/0xe8
[21630.934151] el0t_64_sync+0x1ac/0x1b0
[21630.934923] Code: aa1803e0 97ffef2b a9446bf9 17ffff9c (d4210000)
[21630.936461] SMP: stopping secondary CPUs
[21630.939550] Starting crashdump kernel...
[21630.940108] Bye!
Link: https://lkml.kernel.org/r/20251029014317.1533488-1-hao.ge@linux.dev
Fixes: 09c46563ff6d ("codetag: debug: introduce OBJEXTS_ALLOC_FAIL to mark failed slab_ext allocations")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Cc: David Rientjes <rientjes@google.com>
Cc: gehao <gehao@kylinos.cn>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently mremap folio pte batch ignores the writable bit during figuring
out a set of similar ptes mapping the same folio. Suppose that the first
pte of the batch is writable while the others are not - set_ptes will end
up setting the writable bit on the other ptes, which is a violation of
mremap semantics. Therefore, use FPB_RESPECT_WRITE to check the writable
bit while determining the pte batch.
Link: https://lkml.kernel.org/r/20251028063952.90313-1-dev.jain@arm.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Fixes: f822a9a81a31 ("mm: optimize mremap() by PTE batching")
Reported-by: David Hildenbrand <david@redhat.com>
Debugged-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [6.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Using gcov on kernels compiled with GCC 15 results in truncated 16-byte
long .gcda files with no usable data. To fix this, update GCOV_COUNTERS
to match the value defined by GCC 15.
Tested with GCC 14.3.0 and GCC 15.2.0.
Link: https://lkml.kernel.org/r/20251028115125.1319410-1-oberpar@linux.ibm.com
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reported-by: Matthieu Baerts <matttbe@kernel.org>
Closes: https://github.com/linux-test-project/lcov/issues/445
Tested-by: Matthieu Baerts <matttbe@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When emitting the order of the allocation for a hash table,
alloc_large_system_hash() unconditionally subtracts PAGE_SHIFT from log
base 2 of the allocation size. This is not correct if the allocation size
is smaller than a page, and yields a negative value for the order as seen
below:
TCP established hash table entries: 32 (order: -4, 256 bytes, linear) TCP
bind hash table entries: 32 (order: -2, 1024 bytes, linear)
Use get_order() to compute the order when emitting the hash table
information to correctly handle cases where the allocation size is smaller
than a page:
TCP established hash table entries: 32 (order: 0, 256 bytes, linear) TCP
bind hash table entries: 32 (order: 0, 1024 bytes, linear)
Link: https://lkml.kernel.org/r/20251028191020.413002-1-isaacmanjarres@google.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Accesses within VMA, but beyond i_size rounded up to PAGE_SIZE are
supposed to generate SIGBUS.
This behavior might not be respected on truncation.
During truncation, the kernel splits a large folio in order to reclaim
memory. As a side effect, it unmaps the folio and destroys PMD mappings
of the folio. The folio will be refaulted as PTEs and SIGBUS semantics
are preserved.
However, if the split fails, PMD mappings are preserved and the user will
not receive SIGBUS on any accesses within the PMD.
Unmap the folio on split failure. It will lead to refault as PTEs and
preserve SIGBUS semantics.
Make an exception for shmem/tmpfs that for long time intentionally mapped
with PMDs across i_size.
Link: https://lkml.kernel.org/r/20251027115636.82382-3-kirill@shutemov.name
Fixes: b9a8a4195c7d ("truncate,shmem: Handle truncates that split large folios")
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fix SIGBUS semantics with large folios", v3.
Accessing memory within a VMA, but beyond i_size rounded up to the next
page size, is supposed to generate SIGBUS.
Darrick reported[1] an xfstests regression in v6.18-rc1. generic/749
failed due to missing SIGBUS. This was caused by my recent changes that
try to fault in the whole folio where possible:
19773df031bc ("mm/fault: try to map the entire file folio in finish_fault()")
357b92761d94 ("mm/filemap: map entire large folio faultaround")
These changes did not consider i_size when setting up PTEs, leading to
xfstest breakage.
However, the problem has been present in the kernel for a long time -
since huge tmpfs was introduced in 2016. The kernel happily maps
PMD-sized folios as PMD without checking i_size. And huge=always tmpfs
allocates PMD-size folios on any writes.
I considered this corner case when I implemented a large tmpfs, and my
conclusion was that no one in their right mind should rely on receiving a
SIGBUS signal when accessing beyond i_size. I cannot imagine how it could
be useful for the workload.
But apparently filesystem folks care a lot about preserving strict SIGBUS
semantics.
Generic/749 was introduced last year with reference to POSIX, but no real
workloads were mentioned. It also acknowledged the tmpfs deviation from
the test case.
POSIX indeed says[3]:
References within the address range starting at pa and
continuing for len bytes to whole pages following the end of an
object shall result in delivery of a SIGBUS signal.
The patchset fixes the regression introduced by recent changes as well as
more subtle SIGBUS breakage due to split failure on truncation.
This patch (of 2):
Accesses within VMA, but beyond i_size rounded up to PAGE_SIZE are
supposed to generate SIGBUS.
Recent changes attempted to fault in full folio where possible. They did
not respect i_size, which led to populating PTEs beyond i_size and
breaking SIGBUS semantics.
Darrick reported generic/749 breakage because of this.
However, the problem existed before the recent changes. With huge=always
tmpfs, any write to a file leads to PMD-size allocation. Following the
fault-in of the folio will install PMD mapping regardless of i_size.
Fix filemap_map_pages() and finish_fault() to not install:
- PTEs beyond i_size;
- PMD mappings across i_size;
Make an exception for shmem/tmpfs that for long time intentionally
mapped with PMDs across i_size.
Link: https://lkml.kernel.org/r/20251027115636.82382-1-kirill@shutemov.name
Link: https://lkml.kernel.org/r/20251027115636.82382-2-kirill@shutemov.name
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Fixes: 6795801366da ("xfs: Support large folios")
Reported-by: "Darrick J. Wong" <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pde is erased from subdir rbtree through rb_erase(), but not set the node
to EMPTY, which may result in uaf access. We should use RB_CLEAR_NODE()
set the erased node to EMPTY, then pde_subdir_next() will return NULL to
avoid uaf access.
We found an uaf issue while using stress-ng testing, need to run testcase
getdent and tun in the same time. The steps of the issue is as follows:
1) use getdent to traverse dir /proc/pid/net/dev_snmp6/, and current
pde is tun3;
2) in the [time windows] unregister netdevice tun3 and tun2, and erase
them from rbtree. erase tun3 first, and then erase tun2. the
pde(tun2) will be released to slab;
3) continue to getdent process, then pde_subdir_next() will return
pde(tun2) which is released, it will case uaf access.
CPU 0 | CPU 1
-------------------------------------------------------------------------
traverse dir /proc/pid/net/dev_snmp6/ | unregister_netdevice(tun->dev) //tun3 tun2
sys_getdents64() |
iterate_dir() |
proc_readdir() |
proc_readdir_de() | snmp6_unregister_dev()
pde_get(de); | proc_remove()
read_unlock(&proc_subdir_lock); | remove_proc_subtree()
| write_lock(&proc_subdir_lock);
[time window] | rb_erase(&root->subdir_node, &parent->subdir);
| write_unlock(&proc_subdir_lock);
read_lock(&proc_subdir_lock); |
next = pde_subdir_next(de); |
pde_put(de); |
de = next; //UAF |
rbtree of dev_snmp6
|
pde(tun3)
/ \
NULL pde(tun2)
Link: https://lkml.kernel.org/r/20251025024233.158363-1-albin_yang@163.com
Signed-off-by: Wei Yang <albinwyang@tencent.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: wangzijie <wangzijie1@honor.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
folio split clears PG_has_hwpoisoned, but the flag should be preserved in
after-split folios containing pages with PG_hwpoisoned flag if the folio
is split to >0 order folios. Scan all pages in a to-be-split folio to
determine which after-split folios need the flag.
An alternatives is to change PG_has_hwpoisoned to PG_maybe_hwpoisoned to
avoid the scan and set it on all after-split folios, but resulting false
positive has undesirable negative impact. To remove false positive,
caller of folio_test_has_hwpoisoned() and folio_contain_hwpoisoned_page()
needs to do the scan. That might be causing a hassle for current and
future callers and more costly than doing the scan in the split code.
More details are discussed in [1].
This issue can be exposed via:
1. splitting a has_hwpoisoned folio to >0 order from debugfs interface;
2. truncating part of a has_hwpoisoned folio in
truncate_inode_partial_folio().
And later accesses to a hwpoisoned page could be possible due to the
missing has_hwpoisoned folio flag. This will lead to MCE errors.
Link: https://lore.kernel.org/all/CAHbLzkoOZm0PXxE9qwtF4gKR=cpRXrSrJ9V9Pm2DJexs985q4g@mail.gmail.com/ [1]
Link: https://lkml.kernel.org/r/20251023030521.473097-1-ziy@nvidia.com
Fixes: c010d47f107f ("mm: thp: split huge page to any lower order pages")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Pankaj Raghav <kernel@pankajraghav.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, scan_get_next_rmap_item() walks every page address in a VMA to
locate mergeable pages. This becomes highly inefficient when scanning
large virtual memory areas that contain mostly unmapped regions, causing
ksmd to use large amount of cpu without deduplicating much pages.
This patch replaces the per-address lookup with a range walk using
walk_page_range(). The range walker allows KSM to skip over entire
unmapped holes in a VMA, avoiding unnecessary lookups. This problem was
previously discussed in [1].
Consider the following test program which creates a 32 TiB mapping in the
virtual address space but only populates a single page:
#include <unistd.h>
#include <stdio.h>
#include <sys/mman.h>
/* 32 TiB */
const size_t size = 32ul * 1024 * 1024 * 1024 * 1024;
int main() {
char *area = mmap(NULL, size, PROT_READ | PROT_WRITE,
MAP_NORESERVE | MAP_PRIVATE | MAP_ANON, -1, 0);
if (area == MAP_FAILED) {
perror("mmap() failed\n");
return -1;
}
/* Populate a single page such that we get an anon_vma. */
*area = 0;
/* Enable KSM. */
madvise(area, size, MADV_MERGEABLE);
pause();
return 0;
}
$ ./ksm-sparse &
$ echo 1 > /sys/kernel/mm/ksm/run
Without this patch ksmd uses 100% of the cpu for a long time (more then 1
hour in my test machine) scanning all the 32 TiB virtual address space
that contain only one mapped page. This makes ksmd essentially deadlocked
not able to deduplicate anything of value. With this patch ksmd walks
only the one mapped page and skips the rest of the 32 TiB virtual address
space, making the scan fast using little cpu.
Link: https://lkml.kernel.org/r/20251023035841.41406-1-pedrodemargomes@gmail.com
Link: https://lkml.kernel.org/r/20251022153059.22763-1-pedrodemargomes@gmail.com
Link: https://lore.kernel.org/linux-mm/423de7a3-1c62-4e72-8e79-19a6413e420c@redhat.com/ [1]
Fixes: 31dbd01f3143 ("ksm: Kernel SamePage Merging")
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: craftfever <craftfever@airmail.cc>
Closes: https://lkml.kernel.org/r/020cf8de6e773bb78ba7614ef250129f11a63781@murena.io
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If no stack depot is allocated yet, due to masking out __GFP_RECLAIM flags
kmsan called from kmalloc cannot allocate stack depot. kmsan fails to
record origin and report issues. This may result in KMSAN failing to
report issues.
Reusing flags from kmalloc without modifying them should be safe for kmsan.
For example, such chain of calls is possible:
test_uninit_kmalloc -> kmalloc -> __kmalloc_cache_noprof ->
slab_alloc_node -> slab_post_alloc_hook ->
kmsan_slab_alloc -> kmsan_internal_poison_memory.
Only when it is called in a context without flags present should
__GFP_RECLAIM flags be masked.
With this change all kmsan tests start working reliably.
Eric reported:
: Yes, KMSAN seems to be at least partially broken currently. Besides the
: fact that the kmsan KUnit test is currently failing (which I reported at
: https://lore.kernel.org/r/20250911175145.GA1376@sol), I've confirmed that
: the poly1305 KUnit test causes a KMSAN warning with Aleksei's patch
: applied but does not cause a warning without it. The warning did get
: reached via syzbot somehow
: (https://lore.kernel.org/r/751b3d80293a6f599bb07770afcef24f623c7da0.1761026343.git.xiaopei01@kylinos.cn/),
: so KMSAN must still work in some cases. But it didn't work for me.
Link: https://lkml.kernel.org/r/20250930115600.709776-2-aleksei.nikiforov@linux.ibm.com
Link: https://lkml.kernel.org/r/20251022030213.GA35717@sol
Fixes: 97769a53f117 ("mm, bpf: Introduce try_alloc_pages() for opportunistic page allocation")
Signed-off-by: Aleksei Nikiforov <aleksei.nikiforov@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The order check and fallback loop is updating the index value on every
loop. This will cause the index to be wrongly aligned by a larger value
while the loop shrinks the order.
This may result in inserting and returning a folio of the wrong index and
cause data corruption with some userspace workloads [1].
[kasong@tencent.com: introduce a temporary variable to improve code]
Link: https://lkml.kernel.org/r/20251023065913.36925-1-ryncsn@gmail.com
Link: https://lore.kernel.org/linux-mm/CAMgjq7DqgAmj25nDUwwu1U2cSGSn8n4-Hqpgottedy0S6YYeUw@mail.gmail.com/ [1]
Link: https://lkml.kernel.org/r/20251022105719.18321-1-ryncsn@gmail.com
Link: https://lore.kernel.org/linux-mm/CAMgjq7DqgAmj25nDUwwu1U2cSGSn8n4-Hqpgottedy0S6YYeUw@mail.gmail.com/ [1]
Fixes: e7a2ab7b3bb5 ("mm: shmem: add mTHP support for anonymous shmem")
Closes: https://lore.kernel.org/linux-mm/CAMgjq7DqgAmj25nDUwwu1U2cSGSn8n4-Hqpgottedy0S6YYeUw@mail.gmail.com/
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
KHO allocates metadata for its preserved memory map using the slab
allocator via kzalloc(). This metadata is temporary and is used by the
next kernel during early boot to find preserved memory.
A problem arises when KFENCE is enabled. kzalloc() calls can be randomly
intercepted by kfence_alloc(), which services the allocation from a
dedicated KFENCE memory pool. This pool is allocated early in boot via
memblock.
When booting via KHO, the memblock allocator is restricted to a "scratch
area", forcing the KFENCE pool to be allocated within it. This creates a
conflict, as the scratch area is expected to be ephemeral and
overwriteable by a subsequent kexec. If KHO metadata is placed in this
KFENCE pool, it leads to memory corruption when the next kernel is loaded.
To fix this, modify KHO to allocate its metadata directly from the buddy
allocator instead of slab.
Link: https://lkml.kernel.org/r/20251021000852.2924827-4-pasha.tatashin@soleen.com
Fixes: fc33e4b44b27 ("kexec: enable KHO support for memory preservation")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: David Matlack <dmatlack@google.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
KHO memory preservation metadata is preserved in 512 byte chunks which
requires their allocation from slab allocator. Slabs are not safe to be
used with KHO because of kfence, and because partial slabs may lead leaks
to the next kernel. Change the size to be PAGE_SIZE.
The kfence specifically may cause memory corruption, where it randomly
provides slab objects that can be within the scratch area. The reason for
that is that kfence allocates its objects prior to KHO scratch is marked
as CMA region.
While this change could potentially increase metadata overhead on systems
with sparsely preserved memory, this is being mitigated by ongoing work to
reduce sparseness during preservation via 1G guest pages. Furthermore,
this change aligns with future work on a stateless KHO, which will also
use page-sized bitmaps for its radix tree metadata.
Link: https://lkml.kernel.org/r/20251021000852.2924827-3-pasha.tatashin@soleen.com
Fixes: fc33e4b44b27 ("kexec: enable KHO support for memory preservation")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Matlack <dmatlack@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "KHO: kfence + KHO memory corruption fix", v3.
This series fixes a memory corruption bug in KHO that occurs when KFENCE
is enabled.
The root cause is that KHO metadata, allocated via kzalloc(), can be
randomly serviced by kfence_alloc(). When a kernel boots via KHO, the
early memblock allocator is restricted to a "scratch area". This forces
the KFENCE pool to be allocated within this scratch area, creating a
conflict. If KHO metadata is subsequently placed in this pool, it gets
corrupted during the next kexec operation.
Google is using KHO and have had obscure crashes due to this memory
corruption, with stacks all over the place. I would prefer this fix to be
properly backported to stable so we can also automatically consume it once
we switch to the upstream KHO.
Patch 1/3 introduces a debug-only feature (CONFIG_KEXEC_HANDOVER_DEBUG)
that adds checks to detect and fail any operation that attempts to place
KHO metadata or preserved memory within the scratch area. This serves as
a validation and diagnostic tool to confirm the problem without affecting
production builds.
Patch 2/3 Increases bitmap to PAGE_SIZE, so buddy allocator can be used.
Patch 3/3 Provides the fix by modifying KHO to allocate its metadata
directly from the buddy allocator instead of slab. This bypasses the
KFENCE interception entirely.
This patch (of 3):
It is invalid for KHO metadata or preserved memory regions to be located
within the KHO scratch area, as this area is overwritten when the next
kernel is loaded, and used early in boot by the next kernel. This can
lead to memory corruption.
Add checks to kho_preserve_* and KHO's internal metadata allocators
(xa_load_or_alloc, new_chunk) to verify that the physical address of the
memory does not overlap with any defined scratch region. If an overlap is
detected, the operation will fail and a WARN_ON is triggered. To avoid
performance overhead in production kernels, these checks are enabled only
when CONFIG_KEXEC_HANDOVER_DEBUG is selected.
[rppt@kernel.org: fix KEXEC_HANDOVER_DEBUG Kconfig dependency]
Link: https://lkml.kernel.org/r/aQHUyyFtiNZhx8jo@kernel.org
[pasha.tatashin@soleen.com: build fix]
Link: https://lkml.kernel.org/r/CA+CK2bBnorfsTymKtv4rKvqGBHs=y=MjEMMRg_tE-RME6n-zUw@mail.gmail.com
Link: https://lkml.kernel.org/r/20251021000852.2924827-1-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20251021000852.2924827-2-pasha.tatashin@soleen.com
Fixes: fc33e4b44b27 ("kexec: enable KHO support for memory preservation")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Matlack <dmatlack@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Page cache folios from a file system that support large block size (LBS)
can have minimal folio order greater than 0, thus a high order folio might
not be able to be split down to order-0. Commit e220917fa507 ("mm: split
a folio in minimum folio order chunks") bumps the target order of
split_huge_page*() to the minimum allowed order when splitting a LBS
folio. This causes confusion for some split_huge_page*() callers like
memory failure handling code, since they expect after-split folios all
have order-0 when split succeeds but in reality get min_order_for_split()
order folios and give warnings.
Fix it by failing a split if the folio cannot be split to the target
order. Rename try_folio_split() to try_folio_split_to_order() to reflect
the added new_order parameter. Remove its unused list parameter.
[The test poisons LBS folios, which cannot be split to order-0 folios, and
also tries to poison all memory. The non split LBS folios take more
memory than the test anticipated, leading to OOM. The patch fixed the
kernel warning and the test needs some change to avoid OOM.]
Link: https://lkml.kernel.org/r/20251017013630.139907-1-ziy@nvidia.com
Fixes: e220917fa507 ("mm: split a folio in minimum folio order chunks")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: syzbot+e6367ea2fdab6ed46056@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68d2c943.a70a0220.1b52b.02b3.GAE@google.com/
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In Agilex5, the TBU (Translation Buffer Unit) can now operate in non-secure
mode, enabling Linux to utilize it through the IOMMU framework. This allows
improved memory management capabilities in non-secure environments. With
Agilex5 lifting this restriction, we are now extending the device tree
bindings to support IOMMU for the Agilex5 SVC.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
