| Age | Commit message (Collapse) | Author |
|---|
|
Add a new routine for acquiring a read delegation on a directory. These
are recallable-only delegations with no support for CB_NOTIFY. That will
be added in a later phase.
Since the same CB_RECALL/DELEGRETURN infrastructure is used for regular
and directory delegations, a normal nfs4_delegation is used to represent
a directory delegation.
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-16-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
As Trond pointed out: "...provided that the presented stateid is
actually valid, it is also sufficient to uniquely identify the file to
which it is associated (see RFC8881 Section 8.2.4), so the filehandle
should be considered mostly irrelevant for operations like DELEGRETURN."
Don't ask fh_verify to filter on file type.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-15-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The filecache infrastructure will only handle S_IFREG files at the
moment. Directory delegations will require adding support for opening
S_IFDIR inodes.
Plumb a "type" argument into nfsd_file_do_acquire() and have all of the
existing callers set it to S_IFREG. Add a new nfsd_file_acquire_dir()
wrapper that nfsd can call to request a nfsd_file that holds a directory
open.
For now, there is no need for a fsnotify_mark for directories, as
CB_NOTIFY is not yet supported. Change nfsd_file_do_acquire() to avoid
allocating one for non-S_IFREG inodes.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-14-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
With the addition of the try_break_lease calls in directory changing
operations, allow generic_setlease to hand them out. Write leases on
directories are never allowed however, so continue to reject them.
For now, there is no API for requesting delegations from userland, so
ensure that userland is prevented from acquiring a lease on a directory.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-13-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In order to add directory delegation support, we must break delegations
on the parent on any change to the directory.
Add a delegated_inode parameter to vfs_symlink() and have it break the
delegation. do_symlinkat() can then wait on the delegation break before
proceeding.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-12-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In order to add directory delegation support, we need to break
delegations on the parent whenever there is going to be a change in the
directory.
Add a new delegated_inode pointer to vfs_mknod() and have the
appropriate callers wait when there is an outstanding delegation. All
other callers just set the pointer to NULL.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-11-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In order to add directory delegation support, we need to break
delegations on the parent whenever there is going to be a change in the
directory.
Add a delegated_inode parameter to vfs_create. Most callers are
converted to pass in NULL, but do_mknodat() is changed to wait for a
delegation break if there is one.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-10-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
As Neil points out:
"I would be in favour of dropping the "dir" arg because it is always
d_inode(dentry->d_parent) which is stable."
...and...
"Also *every* caller of vfs_create() passes ".excl = true". So maybe we
don't need that arg at all."
Drop both arguments from vfs_create() and fix up the callers.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-9-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In order to add directory delegation support, we need to break
delegations on the parent whenever there is going to be a change in the
directory.
Add a delegated_inode parameter to lookup_open and have it break the
delegation. Then, open_last_lookups can wait for the delegation break
and retry the call to lookup_open once it's done.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-8-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In order to add directory delegation support, we need to break
delegations on the parent whenever there is going to be a change in the
directory.
Add a delegated_inode struct to vfs_rmdir() and populate that
pointer with the parent inode if it's non-NULL. Most existing in-kernel
callers pass in a NULL pointer.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-7-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In order to add directory delegation support, we need to break
delegations on the parent whenever there is going to be a change in the
directory.
Add a new delegated_inode parameter to vfs_mkdir. All of the existing
callers set that to NULL for now, except for do_mkdirat which will
properly block until the lease is gone.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-6-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In order to add directory delegation support, we need to break
delegations on the parent whenever there is going to be a change in the
directory.
vfs_link, vfs_unlink, and vfs_rename all have existing delegation break
handling for the children in the rename. Add the necessary calls for
breaking delegations in the parent(s) as well.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-5-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When nfsd starts requesting directory delegations, setlease handlers may
see requests for leases on directories. Push the !S_ISREG check down
into the non-trivial setlease handlers, so we can selectively enable
them where they're supported.
FUSE is special: It's the only filesystem that supports atomic_open and
allows kernel-internal leases. atomic_open is issued when the VFS
doesn't know the state of the dentry being opened. If the file doesn't
exist, it may be created, in which case the dir lease should be broken.
The existing kernel-internal lease implementation has no provision for
this. Ensure that we don't allow directory leases by default going
forward by explicitly disabling them there.
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-4-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The current API requires a pointer to an inode pointer. It's easy for
callers to get this wrong. Add a new delegated_inode structure and use
that to pass back any inode that needs to be waited on.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-3-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently __break_lease takes both a type and an openmode. With the
addition of directory leases, that makes less sense. Declare a set of
LEASE_BREAK_* flags that can be used to control how lease breaks work
instead of requiring a type and an openmode.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-2-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
__break_lease() currently overrides the flc_flags field in the lease
after allocating it. A forthcoming patch will add the ability to request
a FL_DELEG type lease.
Instead of overriding the flags field, add a flags argument to
lease_alloc() and lease_init() so it's set correctly after allocating.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-1-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This is a preparation patch to add errata workaround for non crc writes.
Currently for non-crc writes to the chip can go through the
.gather_write, .write or the reg_update_bits callback.
To allow the addition of the errata fix at a single location use
mcp251xfd_regmap_nocrc_gather_write for all non-CRC write instructions,
similar to the crc regmap.
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Tested-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251001091006.4003841-3-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This is a preparation patch to add GPIO support.
Up to now, the Vdd regulator and the clocks have been managed by
Runtime-PM (on systems without CONFIG_PM these remain permanently
switched on).
During the mcp251xfd_open() callback the mcp251xfd is powered,
soft-reset and configured. In mcp251xfd_stop() the chip is shut down
again. To support the on-chip GPIOs, the chip must be supplied with
power while GPIOs are being requested, even if the networking
interface is down.
To support this, move the functions mcp251xfd_chip_softreset() and
mcp251xfd_chip_clock_init() from mcp251xfd_chip_start() to
mcp251xfd_runtime_resume(). Instead of setting the controller to sleep
mode in mcp251xfd_chip_stop(), bring it into configuration mode. This
way it doesn't take part in bus activity and doesn't enter sleep mode.
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Tested-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251001091006.4003841-2-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch exposes new link mode for 1600Gbps, utilizing 8 lanes at
200Gbps per lane.
Co-developed-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1762863888-1092798-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Change #if to #ifdef CONFIG_PROC_FS to fix warning reported by test robot:
drivers/accel/ivpu/ivpu_drv.c:458:5: warning: "CONFIG_PROC_FS" is not defined, evaluates to 0 [-Wundef]
Fixes: 63cc028484ab ("accel/ivpu: Add fdinfo support for memory statistics")
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Andrzej.Kacprowski@linux.intel.com
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251112071911.1136934-1-karol.wachowski@linux.intel.com
|
|
Implement the ksimd scoped guard API so that it can be used by code that
supports both ARM and arm64.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Encapsulate kernel_neon_begin() and kernel_neon_end() using a 'ksimd'
cleanup guard. This hides the prototype of those functions, allowing
them to be changed for arm64 but not ARM, without breaking code that is
shared between those architectures (RAID6, AEGIS-128)
It probably makes sense to expose this API more widely across
architectures, as it affords more flexibility to the arch code to
plumb it in, while imposing more rigid rules regarding the start/end
bookends appearing in matched pairs.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
One of the factors of a link's grade is the channel load, which is
calculated from the AP's bss load element.
The current code takes this element from the beacon for an active link,
and from bss->ies for an inactive link.
bss->ies is set to either the beacon's ies or to the probe response
ones, with preference to the probe response (meaning that if there was
even one probe response, the ies of it will be stored in bss->ies and
won't be overiden by the beacon ies).
The probe response can be very old, i.e. from the connection time,
where a beacon is updated before each link selection (which is
triggered only after a passive scan).
In such case, the bss load element in the probe response will not
include the channel load caused by the STA, where the beacon will.
This will cause the inactive link to always have a lower channel
load, and therefore an higher grade than the active link's one.
This causes repeated link switches, causing the throughput to drop.
Fix this by always taking the ies from the beacon, as those are for
sure new.
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110145652.b493dbb1853a.I058ba7309c84159f640cc9682d1bda56dd56a536@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
During the development of the rate changes, I evidently made
some changes that shouldn't have been there; beacon templates
with rate_n_flags are only in old versions, so no changes to
them should have been necessary, and evidently broke on some
devices. This also would have broken fixed (injection) rates,
it would seem. Restore the old handling of this.
Fixes: dabc88cb3b78 ("wifi: iwlwifi: handle v3 rates")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220558
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20251008112044.3bb8ea849d8d.I90f4d2b2c1f62eaedaf304a61d2ab9e50c491c2d@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The list_for_each_entry() iterator must not be used outside the loop.
Even though we break and check for NULL, doing so still violates kernel
iteration rules and triggers Coccinelle's use_after_iter.cocci warning.
Cache the matched entry in aux_roc_te and use it consistently after the
loop. This follows iterator best practices, resolves the warning, and
makes the code more maintainable.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Link: https://patch.msgid.link/20251016014919.383565-1-junjie.cao@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
XFRM patches are supposed to be sent to maintainers under "NETWORKING
[IPSEC]" heading, but it doesn't cover XFRM docs yet. Add the entry.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
XFRM docs are currently reside in Documentation/networking directory,
yet these are distinctive as a group of their own. Move them into xfrm
subdirectory.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Number the fifth section ("Exception to threshold settings") to be
consistent with the rest of sections.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The sole section heading ("/proc/sys/net/core/xfrm_* Variables") has
trailing colon. Trim it.
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The first section "Message Structure" has excess underline, while the
second and third one ("TLVS reflect the different parameters" and
"Default configurations for the parameters") have trailing colon. Trim
them.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
List texts are currently aligned at the start of column, rather than
after the list marker. Reindent them.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Sublists of hardware offload type lists are rendered in combined
paragraph due to lack of separator from their parent list. Add it.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Format xfrm offloading steps as numbered list.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
iproute2 snippets (ip x) are shown in long-running definition lists
instead. Format them as literal code blocks that do the semantic job
better.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Do not count buffer objects that have no backing pages, including imported
buffers where pages are set by VM faults triggered by userspace or pinned
by other drivers. Instead, return information about actual memory used by
the NPU.
Counting imported buffers results in incorrect calculations when
the same pages are counted multiple times, giving overly high
results.
Fixes: 7bfc9fa99580 ("accel/ivpu: Expose NPU memory utilization info in sysfs")
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251106101052.1050348-3-karol.wachowski@linux.intel.com
|
|
Implement DRM fdinfo interface to expose memory usage statistics
for NPU device file descriptors. Exclude unpinned and imported
buffers from resident memory calculations to provide accurate
memory usage reporting.
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251106101052.1050348-2-karol.wachowski@linux.intel.com
|
|
Andy Shevchenko <andriy.shevchenko@linux.intel.com> says:
A few drivers use the more customised versions of INTEL_GPP().
Convert them to use INTEL_GPP() directly.
Link: https://patch.msgid.link/20251111191214.1378051-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Currently, when cross-compiling and ccache is used, the expanding of CC
turns out to be without any quotes, leading to the following error:
make[4]: *** No rule to make target 'aarch64-linux-gnu-gcc'. Stop.
make[3]: *** [Makefile:2164: run-command] Error 2
And it makes sense, because after expansion it ends up like this:
make run-command KBUILD_RUN_COMMAND=+$(MAKE) \
HOSTCC=ccache aarch64-linux-gnu-gcc VPATH= srcroot=. $(build)= ...
So add another set of double quotes to surround whatever CC expands to
to make sure the aarch64-linux-gnu-gcc isn't expanded to something that
looks like an entirely separate target.
Fixes: 140332b6ed72 ("kbuild: fix linux-headers package build when $(CC) cannot link userspace")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251111-kbuild-install-extmod-build-fix-cc-expand-third-try-v2-1-15ba1b37e71a@linaro.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
Fix the following corner case:-
Consider a 2M huge page SVM allocation, followed by prefetch call for
the first 4K page. The whole range is initially mapped with single PTE.
After the prefetch, this range gets split to first page + rest of the
pages. Currently, the first page mapping is not updated on MI300A (APU)
since page hasn't migrated. However, after range split PTE mapping it not
valid.
Fix this by forcing page table update for the whole range when prefetch
is called. Calling prefetch on APU doesn't improve performance. If all
it deteriotes. However, functionality has to be supported.
v2: Use apu_prefer_gtt as this issue doesn't apply to APUs with carveout
VRAM
v3: Simplify by setting the flag for all ASICs as it doesn't affect dGPU
v4: Remove v2 and v3 changes. Force update_mapping when range is split
at a size that is not aligned to prange granularity
Suggested-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip Yang<Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 076470b9f6f8d9c7c8ca73a9f054942a686f9ba7)
|
|
Over allocation of save area is not fatal, only under allocation is.
ROCm has various components that independently claim authority over save
area size.
Unless KFD decides to claim single authority, relax size checks.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 15bd4958fe38e763bc17b607ba55155254a01f55)
Cc: stable@vger.kernel.org
|
|
enable parse_cs callback for JPEG5_0_1.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 547985579932c1de13f57f8bcf62cd9361b9d3d3)
Cc: stable@vger.kernel.org
|
|
When the BO pointer provided to amdgpu_bo_create_kernel() points to
non-NULL, amdgpu_bo_create_kernel() takes it as a hint to pin that address
rather than allocate a new BO.
This functionality is never desired for allocating ISP buffers. A new BO
should always be created when isp_kernel_buffer_alloc() is called, per the
description for isp_kernel_buffer_alloc().
Ensure this by zeroing *bo right before the amdgpu_bo_create_kernel() call.
Fixes: 55d42f616976 ("drm/amd/amdgpu: Add helper functions for isp buffers")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 73c8c29baac7f0c7e703d92eba009008cbb5228e)
|
|
[Why]
When changing resolution (e.g., 4K → FHD) in mirror/clone mode with
certain monitors, the monitor blanks and loses connection due to an early
exit in vrr_settings_require_update(). The function only checks if VRR
state, fixed refresh target, or min/max refresh rate range has changed.
During mode changes, if the calculated min/max refresh values remain the
same even though the stream's v_total changed, the function returns early
without updating vrr_params.adjust.v_total_min/max, leaving the monitor's
VRR timing parameters unsynced with the new mode, causing it to blank out.
[How]
Explicitly adjust VRR parameters to the stream's nominal v_total when VRR
is supported, but inactive.
Fixes: 6d31602a9f57 ("drm/amd/display: more liberal vmin/vmax update for freesync")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 607df8248a011524211ee34850345305a1913f9e)
|
|
Fix a potential deadlock caused by inconsistent spinlock usage
between interrupt and process contexts in the userq fence driver.
The issue occurs when amdgpu_userq_fence_driver_process() is called
from both:
- Interrupt context: gfx_v11_0_eop_irq() -> amdgpu_userq_fence_driver_process()
- Process context: amdgpu_eviction_fence_suspend_worker() ->
amdgpu_userq_fence_driver_force_completion() -> amdgpu_userq_fence_driver_process()
In interrupt context, the spinlock was acquired without disabling
interrupts, leaving it in {IN-HARDIRQ-W} state. When the same lock
is acquired in process context, the kernel detects inconsistent
locking since the process context acquisition would enable interrupts
while holding a lock previously acquired in interrupt context.
Kernel log shows:
[ 4039.310790] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[ 4039.310804] kworker/7:2/409 [HC0[0]:SC0[0]:HE1:SE1] takes:
[ 4039.310818] ffff9284e1bed000 (&fence_drv->fence_list_lock){?...}-{3:3},
[ 4039.310993] {IN-HARDIRQ-W} state was registered at:
[ 4039.311004] lock_acquire+0xc6/0x300
[ 4039.311018] _raw_spin_lock+0x39/0x80
[ 4039.311031] amdgpu_userq_fence_driver_process.part.0+0x30/0x180 [amdgpu]
[ 4039.311146] amdgpu_userq_fence_driver_process+0x17/0x30 [amdgpu]
[ 4039.311257] gfx_v11_0_eop_irq+0x132/0x170 [amdgpu]
Fix by using spin_lock_irqsave()/spin_unlock_irqrestore() to properly
manage interrupt state regardless of calling context.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ded3ad780cf97a04927773c4600823b84f7f3cc2)
Cc: stable@vger.kernel.org
|
|
drm_sched_entity_init wasn't called yet, so the only thing to
do is to release allocated memory.
This doesn't fix any bug since entity is zero allocated and
drm_sched_entity_fini does nothing in this case.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ec49374ccb8da86b465beaf09c367f3dfd648d8f)
|
