| Age | Commit message (Collapse) | Author |
|---|
|
The function comment accidentally got wrong indentation.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Fix a possible reference count leak of payload pages during
fuse argument copies.
[Joanne: simplified error cleanup]
Fixes: c090c8abae4b ("fuse: Add io-uring sqe commit and fetch support")
Cc: stable@vger.kernel.org # v6.14
Signed-off-by: Cheng Ding <cding@ddn.com>
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Reorder the i2c2 node to its correct position according to its
register address.This improves the readability and maintainability
of the device tree file by adhering to the established ordering convention.
No functional change is introduced by this reordering.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://lore.kernel.org/r/20251105-k1-add-i2c-node-v1-1-d18dae246137@linux.spacemit.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
The pointer may be invalid when gets to the printf(). In particular
the time_and_date() dereferencing it in some cases without checking.
Move the check from rtc_str() to time_and_date() to cover all cases.
Fixes: 7daac5b2fdf8 ("lib/vsprintf: Print time64_t in human readable format")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20251110132118.4113976-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The ADC available in the r9a06g032 SoC can use up to two internal ADC
cores (ADC1 and ADC2) those internal cores are handled through ADC
controller virtual channels.
Describe this device.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251103141834.71677-4-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add initial device tree support for the OrangePi RV2 board [1], which is
marketed as using the Ky X1 SoC but is identical in die and package
to the SpacemiT K1 SoC [2].
Enable UART0, to boot into a serial console
Two Gigabit Ethernet ports with RGMII interface standard support
are enabled, each port is connected to an external
Motorcomm YT8531C PHY chip which uses the GPIO for reset control.
Enable PDMA.
Enable 8 GB eMMC chip for storage.
Link: http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-R2S.html [1]
Link: https://www.spacemit.com/en/key-stone-k1 [2]
Signed-off-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20251112044426.2351999-3-michael.opdenacker@rootcommit.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Document the compatible string for the OrangePi R2S board [1], which
is marketed as using the Ky X1 SoC but is in fact identical in die
and package to the SpacemiT K1 SoC [2].
Link: http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-R2S.html [1]
Link: https://www.spacemit.com/en/key-stone-k1 [2]
Signed-off-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20251112044426.2351999-2-michael.opdenacker@rootcommit.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Add Ethernet MAC (GMAC) device nodes to the RZ/N2H (R9A09G087) SoC DTSI.
The RZ/N2H integrates three GMAC interfaces based on the Synopsys
DesignWare MAC (version 5.20).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251028175458.1037397-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add Ethernet MAC (GMAC) device nodes to the RZ/T2H (R9A09G077) SoC DTSI.
The RZ/T2H integrates three GMAC interfaces based on the Synopsys
DesignWare MAC (version 5.20).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251028175458.1037397-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add an Ethernet Switch Subsystem (ETHSS) device node to the RZ/N2H
(R9A09G087) SoC. The ETHSS IP block is responsible for handling MII
pass-through or conversion to RMII/RGMII.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251028175458.1037397-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add an Ethernet Switch Subsystem (ETHSS) device node to the RZ/T2H
(R9A09G077) SoC. The ETHSS IP block is responsible for handling MII
pass-through or conversion to RMII/RGMII.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251028175458.1037397-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
We can easily check if there are any reclaimble zones by just looking
at the used counters in the reclaim buckets, so do that to free up the
xarray mark we currently use for this purpose.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Switch the few remaining users to use the underlying struct directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
l_iclog_heads is only used in one place and can be trivially derived
from l_iclog_hsize by a single shift operation. Remove it, and switch
the initialization of l_iclog_hsize to use struct_size so that it is
directly derived from the on-disk format definition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
There are almost no users of the typedef left, kill it and switch the
remaining users to use the underlying struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xlog_in_core_2_t is a really odd type, not only is it grossly
misnamed because it actually is an on-disk structure, but it also
reprents the actual on-disk structure in a rather odd way.
A v1 or small v2 log header look like:
+-----------------------+
| xlog_record |
+-----------------------+
while larger v2 log headers look like:
+-----------------------+
| xlog_record |
+-----------------------+
| xlog_rec_ext_header |
+-------------------+---+
| ..... |
+-----------------------+
| xlog_rec_ext_header |
+-----------------------+
I.e., the ext headers are a variable sized array at the end of the
header. So instead of declaring a union of xlog_rec_header,
xlog_rec_ext_header and padding to BBSIZE, add the proper padding to
struct struct xlog_rec_header and struct xlog_rec_ext_header, and
add a variable sized array of the latter to the former. This also
exposes the somewhat unusual scope of the log checksums, which is
made explicitly now by adding proper padding and macro designating
the actual payload length.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The xlog_iclog definition has been pretty standard for a while, so drop
this now rather misleading comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Remove the separate head variable, move the ic_datap initialization
up a bit where the context is more obvious and remove the duplicate
memset right after a zeroing memory allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Most accessed to the on-disk log record header are for the original
xlog_rec_header. Make that the main structure, and case for the
single remaining place using other union legs.
This prepares for removing xlog_in_core_2_t entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Accessing the cycle arrays in the original log record header vs the
extended header is messy and duplicated in multiple places.
Add a xlog_cycle_data helper to abstract it out.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The XLOG_HEADER_CYCLE_SIZE / BBSIZE expression is used a lot
in the log code, give it a symbolic name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The current code uses of_iomap() to map registers but never calls
iounmap() on any error path after the mapping. This causes a memory
leak when probe fails after successful ioremap, for example when
of_clk_add_provider() or r9a06g032_add_clk_domain() fails.
Replace of_iomap() with devm_of_iomap() to automatically unmap the
region on probe failure. Update the error check accordingly to use
IS_ERR() and PTR_ERR() since devm_of_iomap() returns ERR_PTR on error.
Fixes: 4c3d88526eba ("clk: renesas: Renesas R9A06G032 clock driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251030061603.1954-1-vulab@iscas.ac.cn
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Convert the divider clock registration in the R9A09G077 CPG driver to use
device-managed (devm_) helper functions.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251028165127.991351-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Remove an unnecessary blank line at the end of
r9a09g077_cpg_div_clk_register() to tidy up the code.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251028165127.991351-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add the CLK_SET_RATE_PARENT flag to divider clock registration so that rate
changes can propagate to parent clocks when needed. This allows the CPG
divider clocks to request rate adjustments from their parent, ensuring
correct frequency scaling and improved flexibility in clock rate selection.
Fixes: 065fe720eec6e ("clk: renesas: Add support for R9A09G077 SoC")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251028165127.991351-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Describe the 3DGE module clock needed to operate the PowerVR GPU.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251106211604.2766465-5-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
After integrating OLDI support[0], it is necessary to identify which VP
instances use OLDI, since the OLDI driver owns the video port clock
(as a serial clock). Clock operations on these VPs must be delegated to
the OLDI driver, not handled by the TIDSS driver. This issue also
emerged in upstream discussions when DSI-related clock management was
attempted in the TIDSS driver[1].
To address this, add an 'is_ext_vp_clk' array to the 'tidss_device'
structure, marking a VP as 'true' during 'tidss_oldi_init()' and as
'false' during 'tidss_oldi_deinit()'. TIDSS then uses 'is_ext_vp_clk'
to skip clock validation checks in 'dispc_vp_mode_valid()' for VPs
under OLDI control.
Since OLDI uses the DSS VP clock directly as a serial interface and
manages its own rate, mode validation should be implemented in the OLDI
bridge's 'mode_valid' hook. This patch adds that logic, ensuring proper
delegation and avoiding spurious clock handling in the TIDSS driver.
[0]: https://lore.kernel.org/all/20250528122544.817829-1-aradhya.bhatia@linux.dev/
[1]: https://lore.kernel.org/all/DA6TT575Z82D.3MPK8HG5GRL8U@kernel.org/
Fixes: 7246e0929945 ("drm/tidss: Add OLDI bridge support")
Tested-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Swamil Jain <s-jain1@ti.com>
Link: https://patch.msgid.link/20251104151422.307162-3-s-jain1@ti.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patch.msgid.link/ffd5ebe03391b3c01e616c0c844a4b8ddecede36.1762513240.git.jani.nikula@intel.com
|
|
The TIDSS hardware does not have independent maximum or minimum pixel
clock limits for each video port. Instead, these limits are determined
by the SoC's clock architecture. Previously, this constraint was
modeled using the 'max_pclk_khz' and 'min_pclk_khz' fields in
'dispc_features', but this approach is static and does not account for
the dynamic behavior of PLLs.
This patch removes the 'max_pclk_khz' and 'min_pclk_khz' fields from
'dispc_features'. The correct way to check if a requested mode's pixel
clock is supported is by using 'clk_round_rate()' in the 'mode_valid()'
hook. If the best frequency match for the mode clock falls within the
supported tolerance, it is approved. TIDSS supports a 5% pixel clock
tolerance, which is now reflected in the validation logic.
This change allows existing DSS-compatible drivers to be reused across
SoCs that only differ in their pixel clock characteristics. The
validation uses 'clk_round_rate()' for each mode, which may introduce
additional delay (about 3.5 ms for 30 modes), but this is generally
negligible. Users desiring faster validation may bypass these calls
selectively, for example, checking only the highest resolution mode,
as shown here[1].
[1]: https://lore.kernel.org/all/20250704094851.182131-3-j-choudhary@ti.com/
Tested-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Swamil Jain <s-jain1@ti.com>
Link: https://patch.msgid.link/20251104151422.307162-2-s-jain1@ti.com
[Tomi: dropped 'inline' from check_pixel_clock]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Document the new userspace-visible features and APIs for handling
synchronous external abort (SEA)
- KVM_CAP_ARM_SEA_TO_USER: How userspace enables the new feature.
- KVM_EXIT_ARM_SEA: exit userspace gets when it needs to handle SEA
and what userspace gets while taking the SEA.
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Link: https://msgid.link/20251013185903.1372553-4-jiaqiyan@google.com
[ oliver: make documentation concise, remove implementation detail ]
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
Currently, the logic for skipping the read range for a write is
if (!(iter->flags & IOMAP_UNSHARE) &&
(from <= poff || from >= poff + plen) &&
(to <= poff || to >= poff + plen))
which breaks down to skipping the read if any of these are true:
a) from <= poff && to <= poff
b) from <= poff && to >= poff + plen
c) from >= poff + plen && to <= poff
d) from >= poff + plen && to >= poff + plen
This can be simplified to
if (!(iter->flags & IOMAP_UNSHARE) && from <= poff && to >= poff + plen)
from the following reasoning:
a) from <= poff && to <= poff
This reduces to 'to <= poff' since it is guaranteed that 'from <= to'
(since to = from + len). It is not possible for 'from <= to' to be true
here because we only reach here if plen > 0 (thanks to the preceding 'if
(plen == 0)' check that would break us out of the loop). If 'to <=
poff', plen would have to be 0 since poff and plen get adjusted in
lockstep for uptodate blocks. This means we can eliminate this check.
c) from >= poff + plen && to <= poff
This is not possible since 'from <= to' and 'plen > 0'. We can eliminate
this check.
d) from >= poff + plen && to >= poff + plen
This reduces to 'from >= poff + plen' since 'from <= to'.
It is not possible for 'from >= poff + plen' to be true here. We only
reach here if plen > 0 and for writes, poff and plen will always be
block-aligned, which means poff <= from < poff + plen. We can eliminate
this check.
The only valid check is b) from <= poff && to >= poff + plen.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20251111193658.3495942-7-joannelkoong@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Instead of requiring that the caller calls iomap_finish_folio_read()
even if the ->read_folio_range() callback returns an error, account for
this internally in iomap instead, which makes the interface simpler and
makes it match writeback's ->read_folio_range() error handling
expectations.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20251111193658.3495942-6-joannelkoong@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pending writebacks must be accounted for to determine when all requests
have completed and writeback on the folio should be ended. Currently
this is done by atomically incrementing ifs->write_bytes_pending for
every range to be written back.
Instead, the number of atomic operations can be minimized by setting
ifs->write_bytes_pending to the folio size, internally tracking how many
bytes are written back asynchronously, and then after sending off all
the requests, decrementing ifs->write_bytes_pending by the number of
bytes not written back asynchronously. Now, for N ranges written back,
only N + 2 atomic operations are required instead of 2N + 2.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20251111193658.3495942-5-joannelkoong@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Document that iomap_finish_folio_write() must be called after writeback
on the range completes.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20251111193658.3495942-4-joannelkoong@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The end position to start truncating from may be at an offset into a
block, which under the current logic would result in overtruncation.
Adjust the calculation to account for unaligned end offsets.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20251111193658.3495942-3-joannelkoong@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
bytes_submitted/bytes_not_submitted
The naming "bytes_pending" and "bytes_accounted" may be confusing and
could be better named. Rename this to "bytes_submitted" and
"bytes_not_submitted" to make it more clear that these are bytes we
passed to the IO helper to read in.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20251111193658.3495942-2-joannelkoong@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add iput_not_last() and switch landlock over to it to remove
false-positives from might_sleep() annotations in iput().
Link: https://patch.msgid.link/20251105212025.807549-1-mjguzik@gmail.com
* patches from https://patch.msgid.link/20251105212025.807549-1-mjguzik@gmail.com:
landlock: fix splats from iput() after it started calling might_sleep()
fs: add iput_not_last()
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
At this point it is guaranteed this is not the last reference.
However, a recent addition of might_sleep() at top of iput() started
generating false-positives as it was executing for all values.
Remedy the problem by using the newly introduced iput_not_last().
Reported-by: syzbot+12479ae15958fc3f54ec@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68d32659.a70a0220.4f78.0012.GAE@google.com/
Fixes: 2ef435a872ab ("fs: add might_sleep() annotation to iput() and more")
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251105212025.807549-2-mjguzik@gmail.com
Reviewed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251105212025.807549-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In systemd we're trying to switch the internal credentials setup logic
to new mount API [1], and I noticed fsconfig(FSCONFIG_CMD_RECONFIGURE)
consistently fails on tmpfs with noswap option. This can be trivially
reproduced with the following:
```
int fs_fd = fsopen("tmpfs", 0);
fsconfig(fs_fd, FSCONFIG_SET_FLAG, "noswap", NULL, 0);
fsconfig(fs_fd, FSCONFIG_CMD_CREATE, NULL, NULL, 0);
fsmount(fs_fd, 0, 0);
fsconfig(fs_fd, FSCONFIG_CMD_RECONFIGURE, NULL, NULL, 0); <------ EINVAL
```
After some digging the culprit is shmem_reconfigure() rejecting
!(ctx->seen & SHMEM_SEEN_NOSWAP) && sbinfo->noswap, which is bogus
as ctx->seen serves as a mask for whether certain options are touched
at all. On top of that, noswap option doesn't use fsparam_flag_no,
hence it's not really possible to "reenable" swap to begin with.
Drop the check and redundant SHMEM_SEEN_NOSWAP flag.
[1] https://github.com/systemd/systemd/pull/39637
Fixes: 2c6efe9cf2d7 ("shmem: add support to ignore swap")
Signed-off-by: Mike Yuan <me@yhndnzj.com>
Link: https://patch.msgid.link/20251108190930.440685-1-me@yhndnzj.com
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
grab_requested_mnt_ns was changed to return error codes on failure, but
its callers were not updated to check for error pointers, still checking
only for a NULL return value.
This commit updates the callers to use IS_ERR() or IS_ERR_OR_NULL() and
PTR_ERR() to correctly check for and propagate errors.
This also makes sure that the logic actually works and mount namespace
file descriptors can be used to refere to mounts.
Christian Brauner <brauner@kernel.org> says:
Rework the patch to be more ergonomic and in line with our overall error
handling patterns.
Fixes: 7b9d14af8777 ("fs: allow mount namespace fd")
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrei Vagin <avagin@google.com>
Link: https://patch.msgid.link/20251111062815.2546189-1-avagin@google.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In include/rdma/ib_cm.h:
Correct a typedef's kernel-doc notation by adding the 'typedef' keyword
to it to avoid a warning.
Add a leading " *" to a kernel-doc line to avoid a warning.
Warning: ib_cm.h:289 function parameter 'ib_cm_handler' not described
in 'int'
Warning: ib_cm.h:289 expecting prototype for ib_cm_handler(). Prototype
was for int() instead
Warning: ib_cm.h:484 bad line: connection message in case duplicates
are received.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251112062908.2711007-1-rdunlap@infradead.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
snd_gf1_synth_init() and snd_gf1_synth_done() were declared but never
implenmented and used since the beginning of kernel git history.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20251112092007.3546539-1-yuehaibing@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The project hardware ID should be ALC287_FIXUP_TXNW2781_I2C,
not ALC287_FIXUP_TAS2781_I2C for HP Lampass projects.
Fixes: 7a39c723b747 ("ALSA: hda/tas2781: Add new quirk for HP new projects")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20251112092609.15865-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Test how KVM handles guest SEA when APEI is unable to claim it, and
KVM_CAP_ARM_SEA_TO_USER is enabled.
The behavior is triggered by consuming recoverable memory error (UER)
injected via EINJ. The test asserts two major things:
1. KVM returns to userspace with KVM_EXIT_ARM_SEA exit reason, and
has provided expected fault information, e.g. esr, flags, gva, gpa.
2. Userspace is able to handle KVM_EXIT_ARM_SEA by injecting SEA to
guest and KVM injects expected SEA into the VCPU.
Tested on a data center server running Siryn AmpereOne processor
that has RAS support.
Several things to notice before attempting to run this selftest:
- The test relies on EINJ support in both firmware and kernel to
inject UER. Otherwise the test will be skipped.
- The under-test platform's APEI should be unable to claim the SEA.
Otherwise the test will be skipped.
- Some platform doesn't support notrigger in EINJ, which may cause
APEI and GHES to offline the memory before guest can consume
injected UER, and making test unable to trigger SEA.
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Link: https://msgid.link/20251013185903.1372553-3-jiaqiyan@google.com
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
When APEI fails to handle a stage-2 synchronous external abort (SEA),
today KVM injects an asynchronous SError to the VCPU then resumes it,
which usually results in unpleasant guest kernel panic.
One major situation of guest SEA is when vCPU consumes recoverable
uncorrected memory error (UER). Although SError and guest kernel panic
effectively stops the propagation of corrupted memory, guest may
re-use the corrupted memory if auto-rebooted; in worse case, guest
boot may run into poisoned memory. So there is room to recover from
an UER in a more graceful manner.
Alternatively KVM can redirect the synchronous SEA event to VMM to
- Reduce blast radius if possible. VMM can inject a SEA to VCPU via
KVM's existing KVM_SET_VCPU_EVENTS API. If the memory poison
consumption or fault is not from guest kernel, blast radius can be
limited to the triggering thread in guest userspace, so VM can
keep running.
- Allow VMM to protect from future memory poison consumption by
unmapping the page from stage-2, or to interrupt guest of the
poisoned page so guest kernel can unmap it from stage-1 page table.
- Allow VMM to track SEA events that VM customers care about, to restart
VM when certain number of distinct poison events have happened,
to provide observability to customers in log management UI.
Introduce an userspace-visible feature to enable VMM handle SEA:
- KVM_CAP_ARM_SEA_TO_USER. As the alternative fallback behavior
when host APEI fails to claim a SEA, userspace can opt in this new
capability to let KVM exit to userspace during SEA if it is not
owned by host.
- KVM_EXIT_ARM_SEA. A new exit reason is introduced for this.
KVM fills kvm_run.arm_sea with as much as possible information about
the SEA, enabling VMM to emulate SEA to guest by itself.
- Sanitized ESR_EL2. The general rule is to keep only the bits
useful for userspace and relevant to guest memory.
- Flags indicating if faulting guest physical address is valid.
- Faulting guest physical and virtual addresses if valid.
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Co-developed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://msgid.link/20251013185903.1372553-2-jiaqiyan@google.com
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
It's not used anymore, so remove it. This allows trully independent
layer state from mixer.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-31-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
With "floating" planes in DE33, mixer can't be stored in layer structure
anymore. Find mixer using currently bound crtc.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-30-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
This allows to almost completely decouple layer code from mixer. This is
important for DE33.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-29-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
Later special plane only driver for DE33 will provide separate
configuration. This change will also help layer driver migrate away from
mixer structure.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-28-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
On DE2 and DE3, UI scalers are located right after VI scalers. So in
order to calculate proper UI scaler base address, number of VI scalers
must be known. In practice, it is same as number of VI channels, but it
doesn't need to be.
Let's make a quirk for this number. Code for configuring channels and
associated functions won't have access to vi_num quirk anymore after
rework for independent planes.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-27-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
