| Age | Commit message (Collapse) | Author |
|---|
|
Integrate the selftests as part of kunit.
Now instead of the test only being run at boot, it can run:
- With CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST=y
It will automatically run at boot as before.
- Otherwise with CONFIG_IOMMU_IO_PGTABLE_LPAE_KUNIT_TEST=m:
1) on module load:
Once the module load the self test will run
# modprobe io-pgtable-arm-selftests
2) debugfs
With CONFIG_KUNIT_DEBUGFS=y You can run the test with
# echo 1 > /sys/kernel/debug/kunit/io-pgtable-arm-test/run
3) Using kunit.py
You can also use the helper script which uses Qemu in the background
# ./tools/testing/kunit/kunit.py run --build_dir build_kunit_arm64 --arch arm64 \
--make_options LLVM=1 --kunitconfig ./kunit/kunitconfig
[18:01:09] ============= io-pgtable-arm-test (1 subtest) ==============
[18:01:09] [PASSED] arm_lpae_do_selftests
[18:01:09] =============== [PASSED] io-pgtable-arm-test ===============
[18:01:09] ============================================================
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Remove the __init constraint, as the test will be converted to KUnit,
it can run on-demand after later.
Also, as KUnit can be a module, make this test modular.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Clean up the io-pgtable-arm library by moving the selftests out.
Next the tests will be registered with kunit.
This is useful also to factor out kernel specific code out, so
it can compiled as part of the hypervisor object.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
At the moment, if the selftest fails it prints a lot of information
about the page table (size, levels...) this requires access to many
internals, which has to be exposed in the next patch moving the
tests out.
Instead, we can simplify the print to only print the fmt and
for each test ias, oas and pgsize_bitmap are already printed.
That is enough to identify the failed case, and the rest can
be deduced from the code.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Replace sprintf() with sysfs_emit() in sysfs show functions.
sysfs_emit() is preferred to format sysfs output as it provides better
bounds checking. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251103120809.32834-1-thorsten.blum@linux.dev
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Update Sam's email address for the PF1550 PMIC driver.
Signed-off-by: Samuel Kayode <samkay014@gmail.com>
Link: https://patch.msgid.link/20251102-update-email-v3-1-8e2c4a4507f4@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Fix a memory leak of struct amd_iommu_pci_segment in alloc_pci_segment()
when system memory (or contiguous memory) is insufficient.
Fixes: 04230c119930 ("iommu/amd: Introduce per PCI segment device table")
Fixes: eda797a27795 ("iommu/amd: Introduce per PCI segment rlookup table")
Fixes: 99fc4ac3d297 ("iommu/amd: Introduce per PCI segment alias_table")
Cc: stable@vger.kernel.org
Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Current IOMMU driver prints "Completion-wait Time-out" error message with
insufficient information to further debug the issue.
Enhancing the error message as following:
1. Log IOMMU PCI device ID in the error message.
2. With "amd_iommu_dump=1" kernel command line option, dump entire
command buffer entries including Head and Tail offset.
Dump the entire command buffer only on the first 'Completion-wait Time-out'
to avoid dmesg spam.
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Ankit Soni <Ankit.Soni@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Stop using 0 for NULL.
sparse moans:
... arch/x86/kvm/vmx/tdx.c:859:38: warning: Using plain integer as NULL pointer
for several TDX pointer initializations. While I love a good ptr=0
now and then, it's good to have quiet sparse builds.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: a50f673f25e0 ("KVM: TDX: Do TDX specific vcpu initialization")
Fixes: 8d032b683c29 ("KVM: TDX: create/destroy VM structure")
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Kirill A. Shutemov" <kas@kernel.org>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Acked-by: Kiryl Shutsemau <kas@kernel.org>
Link: https://patch.msgid.link/20251103234439.DC8227E4@davehans-spike.ostc.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Separate __user pointer variable declaration from kernel one.
There are two 'kvm_cpuid2' pointers involved here. There's an "input"
side: 'td_cpuid' which is a normal kernel pointer and an 'output'
side. The output here is userspace and there is an attempt at properly
annotating the variable with __user:
struct kvm_cpuid2 __user *output, *td_cpuid;
But, alas, this is wrong. The __user in the definition applies to both
'output' and 'td_cpuid'. Sparse notices the address space mismatch and
will complain about it.
Fix it up by completely separating the two definitions so that it is
obviously correct without even having to know what the C syntax rules
even are.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 488808e682e7 ("KVM: x86: Introduce KVM_TDX_GET_CPUID")
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Kirill A. Shutemov" <kas@kernel.org>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Acked-by: Kiryl Shutsemau <kas@kernel.org>
Link: https://patch.msgid.link/20251103234437.A0532420@davehans-spike.ostc.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Take MMU lock around tdh_vp_init() in KVM_TDX_INIT_VCPU to prevent
meeting contention during retries in some no-fail MMU paths.
The TDX module takes various try-locks internally, which can cause
SEAMCALLs to return an error code when contention is met. Dealing with
an error in some of the MMU paths that make SEAMCALLs is not straight
forward, so KVM takes steps to ensure that these will meet no contention
during a single BUSY error retry. The whole scheme relies on KVM to take
appropriate steps to avoid making any SEAMCALLs that could contend while
the retry is happening.
Unfortunately, there is a case where contention could be met if userspace
does something unusual. Specifically, hole punching a gmem fd while
initializing the TD vCPU. The impact would be triggering a KVM_BUG_ON().
The resource being contended is called the "TDR resource" in TDX docs
parlance. The tdh_vp_init() can take this resource as exclusive if the
'version' passed is 1, which happens to be version the kernel passes. The
various MMU operations (tdh_mem_range_block(), tdh_mem_track() and
tdh_mem_page_remove()) take it as shared.
There isn't a KVM lock that maps conceptually and in a lock order friendly
way to the TDR lock. So to minimize infrastructure, just take MMU lock
around tdh_vp_init(). This makes the operations we care about mutually
exclusive. Since the other operations are under a write mmu_lock, the code
could just take the lock for read, however this is weirdly inverted from
the actual underlying resource being contended. Since this is covering an
edge case that shouldn't be hit in normal usage, be a little less weird
and take the mmu_lock for write around the call.
Fixes: 02ab57707bdb ("KVM: TDX: Implement hooks to propagate changes of TDP MMU mirror page table")
Reported-by: Yan Zhao <yan.y.zhao@intel.com>
Suggested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://patch.msgid.link/20251028002824.1470939-1-rick.p.edgecombe@intel.com
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
[sean: tweak comment and capture PUNCH_HOLE interaction]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Felix Maurer says:
====================
hsr: Send correct HSRv0 supervision frames
Hangbin recently reported that the hsr selftests were failing and noted
that the entries in the node table were not merged, i.e., had
00:00:00:00:00:00 as MacAddressB forever [1].
This failure only occured with HSRv0 because it was not sending
supervision frames anymore. While debugging this I found that we were
not really following the HSRv0 standard for the supervision frames we
sent, so I additionally made a few changes to get closer to the standard
and restore a more correct behavior we had a while ago.
The selftests can still fail because they take a while and run into the
timeout. I did not include a change of the timeout because I have more
improvements to the selftests mostly ready that change the test duration
but are net-next material.
[1]: https://lore.kernel.org/netdev/aMONxDXkzBZZRfE5@fedora/
====================
Link: https://patch.msgid.link/cover.1762876095.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For HSRv0, the path_id has the following meaning:
- 0000: PRP supervision frame
- 0001-1001: HSR ring identifier
- 1010-1011: Frames from PRP network (A/B, with RedBoxes)
- 1111: HSR supervision frame
Follow the IEC 62439-3:2010 standard more closely by setting the right
path_id for HSRv0 supervision frames (actually, it is correctly set when
the frame is constructed, but hsr_set_path_id() overwrites it) and set a
fixed HSR ring identifier of 1. The ring identifier seems to be generally
unused and we ignore it anyways on reception, but some fixed identifier is
definitely better than using one identifier in one direction and a wrong
identifier in the other.
This was also the behavior before commit f266a683a480 ("net/hsr: Better
frame dispatch") which introduced the alternating path_id. This was later
moved to hsr_set_path_id() in commit 451d8123f897 ("net: prp: add packet
handling support").
The IEC 62439-3:2010 also contains 6 unused bytes after the MacAddressA in
the HSRv0 supervision frames. Adjust a TODO comment accordingly.
Fixes: f266a683a480 ("net/hsr: Better frame dispatch")
Fixes: 451d8123f897 ("net: prp: add packet handling support")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/ea0d5133cd593856b2fa673d6e2067bf1d4d1794.1762876095.git.fmaurer@redhat.com
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On HSRv0, no supervision frames were sent. The supervison frames were
generated successfully, but failed the check for a sufficiently long mac
header, i.e., at least sizeof(struct hsr_ethhdr), in hsr_fill_frame_info()
because the mac header only contained the ethernet header.
Fix this by including the HSR header in the mac header when generating HSR
supervision frames. Note that the mac header now also includes the TLV
fields. This matches how we set the headers on rx and also the size of
struct hsrv0_ethhdr_sp.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Closes: https://lore.kernel.org/netdev/aMONxDXkzBZZRfE5@fedora/
Fixes: 9cfb5e7f0ded ("net: hsr: fix hsr_init_sk() vs network/transport headers.")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/4354114fea9a642fe71f49aeeb6c6159d1d61840.1762876095.git.fmaurer@redhat.com
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Document the compatible string for the PM7550 PMIC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251023-sm7635-pmxr2230-v3-2-f70466c030fe@fairphone.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Document compatible for PM7550 Torch and Flash LED controller.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251023-sm7635-pmxr2230-v3-1-f70466c030fe@fairphone.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add the PMIV0104 PMIC which is found on e.g. boards with Milos SoCs.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251023-sm7635-pmiv0104-v3-1-27f1c417376d@fairphone.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
These days we can register syscons with of_syscon_register_regmap() so
when we can't find the syscon that probably means it hasn't been
registered yet. Return -EPROBE_DEFER so the driver will try probing
again.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/aQdHmrchkmOr34r3@stanley.mountain
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Move user SQ/CQ offset initialisation at the end of io_prepare_config()
where it already calculated all information to set it properly.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move ring layouts calculations into io_prepare_config(), so that more
misconfiguration checking can be done earlier before creating a ctx.
It also deduplicates some code with ring resizing. And as a bonus, now
it initialises params->sq_off.array, which is closer to all other user
offset init, and also applies it to ring resizing, which was previously
missing it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a structure keeping SQ/CQ sizes and offsets. For now it only records
data previously returned from rings_size and the SQ size.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There will be more information needed during ctx setup, and instead of
passing a handful of pointers around, wrap them all into a new
structure. Add a helper for encapsulating all configuration checks and
preparation, that's also reused for ring resizing.
Note, it indirectly adds a io_uring_sanitise_params() check to ring
resizing, which is a good thing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The parameters in io_register_resize_rings() will be moved into another
structure in a later patch. In preparation to that, convert the params
variable it to a pointer, but still store the data on stack.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use size_add / size_mul set of functions for rings_size() calculations.
It's more consistent with struct_size(), and errors are preserved across
a series of calculations, so intermediate result checks can be omitted.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A preparation patch inversing the IORING_SETUP_NO_SQARRAY check, this
way there is only one successful return path from the function, which
will be helpful later.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge 6.18-rc io_uring fixes, as certain coming changes depend on some
of these.
* io_uring-6.18:
io_uring/rsrc: don't use blk_rq_nr_phys_segments() as number of bvecs
io_uring/query: return number of available queries
io_uring/rw: ensure allocated iovec gets cleared for early failure
io_uring: fix regbuf vector size truncation
io_uring: fix types for region size calulation
io_uring/zcrx: remove sync refill uapi
io_uring: fix buffer auto-commit for multishot uring_cmd
io_uring: correct __must_hold annotation in io_install_fixed_file
io_uring zcrx: add MAINTAINERS entry
io_uring: Fix code indentation error
io_uring/sqpoll: be smarter on when to update the stime usage
io_uring/sqpoll: switch away from getrusage() for CPU accounting
io_uring: fix incorrect unlikely() usage in io_waitid_prep()
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All callers initialize the link status as up. This change is in line
with how of_phy_register_fixed_link() behaves.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/45f644e8-2292-4787-a27a-f69084c93218@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Align pitch to multiples of 8 pixels for bpp values that do not map
to RGB formats. The call to drm_driver_color_mode_format() fails with
DRM_INVALID_FORMAT in these cases. Fall back to manually computing
the pitch alignment from which drm_mode_size_dumb() can compute the
correct pitch.
Fixes userspace that allocates dumb buffers for YUV formats, where
bpp equals 12. A common example is the IGT kms_getfb test.
v2:
- ignore width in calculation
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b1d0e470f881 ("drm/imx/ipuv3: Compute dumb-buffer sizes with drm_mode_size_dumb()")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: imx@lists.linux.dev
Cc: linux-arm-kernel@lists.infradead.org
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/20251104153832.189666-1-tzimmermann@suse.de
|
|
This was done as condition on direct_io_allow_mmap, but I believe
this is not right, as a file might be open two times - once with
write-back enabled another time with FOPEN_DIRECT_IO.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
generic_file_direct_write() also does this and has a large
comment about.
Reproducer here is xfstest's generic/209, which is exactly to
have competing DIO write and cached IO read.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The function netxbig_gpio_ext_get() acquires GPIO descriptors but
fails to release them when errors occur mid-way through initialization.
The cleanup callback registered by devm_add_action_or_reset() only
runs on success, leaving acquired GPIOs leaked on error paths.
Add goto-based error handling to release all acquired GPIOs before
returning errors.
Fixes: 9af512e81964 ("leds: netxbig: Convert to use GPIO descriptors")
Suggested-by: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251031021620.781-1-vulab@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
jbd2 journal handling code doesn't want jbd2_might_wait_for_commit()
to be placed between start_this_handle() and stop_this_handle(). So it
marks the region with rwsem_acquire_read() and rwsem_release().
However, the annotation is too strong for that purpose. We don't have
to use more than try lock annotation for that.
rwsem_acquire_read() implies:
1. might be a waiter on contention of the lock.
2. enter to the critical section of the lock.
All we need in here is to act 2, not 1. So trylock version of
annotation is sufficient for that purpose. Now that dept partially
relies on lockdep annotaions, dept interpets rwsem_acquire_read() as a
potential wait and might report a deadlock by the wait.
Replace it with trylock version of annotation.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Message-ID: <20251024073940.1063-1-byungchul@sk.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When a process exits with numerous large, pinned memory regions consisting
of 4KB pages, the cleanup of the memory region through __ib_umem_release()
may cause soft lockups. This is because unpin_user_page_range_dirty_lock()
is called in a tight loop for unpin and releasing page without yielding the
CPU.
watchdog: BUG: soft lockup - CPU#44 stuck for 26s! [python3:73464]
Kernel panic - not syncing: softlockup: hung tasks
CPU: 44 PID: 73464 Comm: python3 Tainted: G OEL
asm_sysvec_apic_timer_interrupt+0x1b/0x20
RIP: 0010:free_unref_page+0xff/0x190
? free_unref_page+0xe3/0x190
__put_page+0x77/0xe0
put_compound_head+0xed/0x100
unpin_user_page_range_dirty_lock+0xb2/0x180
__ib_umem_release+0x57/0xb0 [ib_core]
ib_umem_release+0x3f/0xd0 [ib_core]
mlx5_ib_dereg_mr+0x2e9/0x440 [mlx5_ib]
ib_dereg_mr_user+0x43/0xb0 [ib_core]
uverbs_free_mr+0x15/0x20 [ib_uverbs]
destroy_hw_idr_uobject+0x21/0x60 [ib_uverbs]
uverbs_destroy_uobject+0x38/0x1b0 [ib_uverbs]
__uverbs_cleanup_ufile+0xd1/0x150 [ib_uverbs]
uverbs_destroy_ufile_hw+0x3f/0x100 [ib_uverbs]
ib_uverbs_close+0x1f/0xb0 [ib_uverbs]
__fput+0x9c/0x280
____fput+0xe/0x20
task_work_run+0x6a/0xb0
do_exit+0x217/0x3c0
do_group_exit+0x3b/0xb0
get_signal+0x150/0x900
arch_do_signal_or_restart+0xde/0x100
exit_to_user_mode_loop+0xc4/0x160
exit_to_user_mode_prepare+0xa0/0xb0
syscall_exit_to_user_mode+0x27/0x50
do_syscall_64+0x63/0xb0
Fix soft lockup issues by incorporating cond_resched() calls within
__ib_umem_release(), and this SG entries are typically grouped in 2MB
chunks on x86_64, adding cond_resched() should has minimal performance
impact.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://patch.msgid.link/20251113095317.2628-1-lirongqing@baidu.com
Acked-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
syzbot is reporting possibility of deadlock due to sharing lock_class_key
for jbd2_handle across ext4 and ocfs2. But this is a false positive, for
one disk partition can't have two filesystems at the same time.
Reported-by: syzbot+6e493c165d26d6fcbf72@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6e493c165d26d6fcbf72
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot+6e493c165d26d6fcbf72@syzkaller.appspotmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <987110fc-5470-457a-a218-d286a09dd82f@I-love.SAKURA.ne.jp>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
If ext4_get_inode_loc() fails (e.g. if it returns -EFSCORRUPTED),
iloc.bh will remain set to NULL. Since ext4_xattr_inode_dec_ref_all()
lacks error checking, this will lead to a null pointer dereference
in ext4_raw_inode(), called right after ext4_get_inode_loc().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c8e008b60492 ("ext4: ignore xattrs past end")
Cc: stable@kernel.org
Signed-off-by: Karina Yankevich <k.yankevich@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Message-ID: <20251022093253.3546296-1-k.yankevich@omp.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Instead of trying very hard to find the largest fair GGTT size that
could be allocated for VFs on the current tile, pick some smaller
rounded down to power-of-two value that is more likely to be
provisioned in the same manner by the other PF instance:
num VFs | GGTT space (MiB)
--------+-----------------
63..57 | 56
56..29 | 64
28..15 | 128
14..8 | 256
7..4 | 512
3..2 | 1024
1 | 2048 (regular PF)
1 | 3584 (admin only PF)
Note that due to FW/HW limitations we can't share all 4GiB GGTT
address space with VFs, so for the larger (>7) number of the VFs
the change in the outcome is happening at different points than
we have in case of GuC contexts/doorbells IDs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251112124408.8094-1-michal.wajdeczko@intel.com
|
|
The cached ei->i_inline_size can become stale between the initial size
check and when ext4_update_inline_data()/ext4_create_inline_data() use
it. Although ext4_get_max_inline_size() reads the correct value at the
time of the check, concurrent xattr operations can modify i_inline_size
before ext4_write_lock_xattr() is acquired.
This causes ext4_update_inline_data() and ext4_create_inline_data() to
work with stale capacity values, leading to a BUG_ON() crash in
ext4_write_inline_data():
kernel BUG at fs/ext4/inline.c:1331!
BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);
The race window:
1. ext4_get_max_inline_size() reads i_inline_size = 60 (correct)
2. Size check passes for 50-byte write
3. [Another thread adds xattr, i_inline_size changes to 40]
4. ext4_write_lock_xattr() acquires lock
5. ext4_update_inline_data() uses stale i_inline_size = 60
6. Attempts to write 50 bytes but only 40 bytes actually available
7. BUG_ON() triggers
Fix this by recalculating i_inline_size via ext4_find_inline_data_nolock()
immediately after acquiring xattr_sem. This ensures ext4_update_inline_data()
and ext4_create_inline_data() work with current values that are protected
from concurrent modifications.
This is similar to commit a54c4613dac1 ("ext4: fix race writing to an
inline_data file while its xattrs are changing") which fixed i_inline_off
staleness. This patch addresses the related i_inline_size staleness issue.
Reported-by: syzbot+f3185be57d7e8dda32b8@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=f3185be57d7e8dda32b8
Cc: stable@kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Message-ID: <20251020060936.474314-1-kartikey406@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Rationale:
- ND_ROOT_PRESET is only set in a condition already marked unlikely
- LOOKUP_IS_SCOPED already has unlikely on it, but inconsistently
applied
- set_root() only fails if there is a bug
- most names are not empty (see !*s)
- most of the time path_init() does not encounter LOOKUP_CACHED without
LOOKUP_RCU
- LOOKUP_IN_ROOT is a rarely seen flag
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251105150630.756606-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The MODULE_PARM_DESC string for the "active" parameter is missing a
space and has an extraneous trailing ']' character. Correct these.
Before patch:
$ modinfo -p ./drm_client_lib.ko
active:Choose which drm client to start, default isfbdev] (string)
After patch:
$ modinfo -p ./drm_client_lib.ko
active:Choose which drm client to start, default is fbdev (string)
Fixes: f7b42442c4ac ("drm/log: Introduce a new boot logger to draw the kmsg on the screen")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251112010920.2355712-1-rdunlap@infradead.org
|
|
If a GPIO is used to control the chip's enable pin, it needs to be pulled
high before any i2c communication is attempted.
Currently, the enable GPIO handling is not correct.
Assume the enable GPIO is low when the probe function is entered. In this
case the device is in SHUTDOWN mode and does not react to i2c commands.
During probe the following sequence happens:
1. The call to lp50xx_reset() on line 548 has no effect as i2c is not
possible yet.
2. Then - on line 552 - lp50xx_enable_disable() is called. As
"priv->enable_gpio“ has not yet been initialized, setting the GPIO has
no effect. Also the i2c enable command is not executed as the device
is still in SHUTDOWN.
3. On line 556 the call to lp50xx_probe_dt() finally parses the rest of
the DT and the configured priv->enable_gpio is set up.
As a result the device is still in SHUTDOWN mode and not ready for
operation.
Split lp50xx_enable_disable() into distinct enable and disable functions
to enforce correct ordering between enable_gpio manipulations and i2c
commands.
Read enable_gpio configuration from DT before attempting to manipulate
enable_gpio.
Add delays to observe correct wait timing after manipulating enable_gpio
and before any i2c communication.
Cc: stable@vger.kernel.org
Fixes: 242b81170fb8 ("leds: lp50xx: Add the LP50XX family of the RGB LED driver")
Signed-off-by: Christian Hitz <christian.hitz@bbv.ch>
Link: https://patch.msgid.link/20251028155141.1603193-1-christian@klarinett.li
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The Amlogic S6/S7/S7D SoCs support GPIO interrupt lines:
S6 IRQ Number:
- 99:98 2 pins on bank CC
- 97 1 pin on bank TESTN
- 96:81 16 pins on bank A
- 80:65 16 pins on bank Z
- 64:45 20 pins on bank X
- 44:37 8 pins on bank H offs H1
- 36:32 5 pins on bank F
- 31:25 7 pins on bank D
- 24:22 3 pins on bank E
- 21:14 8 pins on bank C
- 13:0 14 pins on bank B
S7 IRQ Number:
- 83:82 2 pins on bank CC
- 81 1 pin on bank TESTN
- 80:68 13 pins on bank Z
- 67:48 20 pins on bank X
- 47:36 12 pins on bank H
- 35:24 12 pins on bank D
- 23:22 2 pins on bank E
- 21:14 8 pins on bank C
- 13:0 14 pins on bank B
S7D IRQ Number:
- 83:82 2 pins on bank CC
- 81:75 7 pins on bank DV
- 74 1 pin on bank TESTN
- 73:61 13 pins on bank Z
- 60:41 20 pins on bank X
- 40:29 12 pins on bank H
- 28:24 5 pins on bank D
- 23:22 2 pins on bank E
- 21:14 8 pins on bank C
- 13:0 14 pins on bank B
Add the required compatibles and interrupt count initializers.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251105-irqchip-gpio-s6-s7-s7d-v1-2-b4d1fe4781c1@amlogic.com
|
|
Update the device tree binding document for GPIO interrupt controller of
Amlogic S6 S7 and S7D SoCs.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251105-irqchip-gpio-s6-s7-s7d-v1-1-b4d1fe4781c1@amlogic.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Add Chunhai Guo as a EROFS reviewer to get more eyes from interested
industry vendors
- Fix infinite loop caused by incomplete crafted zstd-compressed data
(thanks to Robert again!)
* tag 'erofs-for-6.18-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: avoid infinite loop due to incomplete zstd-compressed data
MAINTAINERS: erofs: add myself as reviewer
|
|
Pull smb server fixes from Steve French:
- Fix smbdirect (RDMA) disconnect hang bug
- Fix potential Denial of Service when connection limit exceeded
- Fix smbdirect (RDMA) connection (potentially accessing freed memory)
bug
* tag 'v6.18-rc5-smb-server-fixes' of git://git.samba.org/ksmbd:
smb: server: let smb_direct_disconnect_rdma_connection() turn CREATED into DISCONNECTED
ksmbd: close accepted socket when per-IP limit rejects connection
smb: server: rdma: avoid unmapping posted recv on accept failure
|
|
functions
Replace scnprintf() with sysfs_emit() in sysfs *_show() functions
in stratix10-rsu.c to follow the kernel's guidelines from
Documentation/filesystems/sysfs.rst.
This improves consistency, safety, and makes the code easier to
maintain and update in the future.
Signed-off-by: Rahul Kumar <rk0006818@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
framework.
* Add support for asynchronous communication to the RSU client channel.
* Migrate functions that communicate with the SDM to use the asynchronous
framework.
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Integrate Remote System Update(RSU) service commands into the
asynchronous framework for communicating with SDM. This allows the RSU
commands to be processed asynchronously, improving the responsiveness
of the Stratix10 service channel.
The asynchronous framework now supports the following RSU commands:
* COMMAND_RSU_GET_SPT_TABLE
* COMMAND_RSU_STATUS
* COMMAND_RSU_NOTIFY
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Introduce support for asynchronous communication with the Stratix10
service channel. Define new structures to enable asynchronous messaging
with the Secure Device Manager (SDM). Add and remove asynchronous
support for existing channels. Implement initialization and cleanup
routines for the asynchronous framework. Enable sending and polling of
messages to the SDM asynchronously.
The new public functions added are:
- stratix10_svc_add_async_client: Adds a client to the service channel.
- stratix10_svc_remove_async_client: Removes an asynchronous client from
the service channel.
- stratix10_svc_async_send: Sends an asynchronous message to the SDM
mailbox in EL3 secure firmware.
- stratix10_svc_async_poll: Polls the status of an asynchronous service
request in EL3 secure firmware.
- stratix10_svc_async_done: Marks an asynchronous transaction as
complete and frees up the resources.
These changes enhance the functionality of the Stratix10 service channel
by allowing for more efficient and flexible communication with the
firmware.
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add mutex lock to stratix10_svc_allocate_memory and
stratix10_svc_free_memory for thread safety. This prevents race
conditions and ensures proper synchronization during memory operations.
This is required for parallel communication with the Stratix10 service
channel.
Fixes: 7ca5ce896524f ("firmware: add Intel Stratix10 service layer driver")
Cc: stable@vger.kernel.org
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add entry in Stratix 10 Service Layer to support temperature and voltage
sensor.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
