| Age | Commit message (Collapse) | Author |
|---|
|
For lack of a better place to put it, Resizable BAR code has been placed
inside pci.c and setup-res.c that do not use it for anything. Upcoming
changes are going to add more Resizable BAR related functions, increasing
the code size.
As pci.c is huge as is, move the Resizable BAR related code and the BAR
resize code from setup-res.c to rebar.c.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-2-ilpo.jarvinen@linux.intel.com
|
|
restore_dev_resource() copies saved addresses and flags from the struct
pci_dev_resource back to the struct resource, typically, during rollback
from a failure or in preparation for a retry attempt.
If the resource is within resource tree, the resource must not be
modified as the resource tree could be corrupted. Thus, it's a bug to
call restore_dev_resource() for assigned resources (which did happen
due to logic flaws in the BAR resize rollback).
Add WARN_ON_ONCE() into restore_dev_resource() to detect such bugs easily
and return without altering the resource to prevent corruption.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-12-ilpo.jarvinen@linux.intel.com
|
|
PCI core handles releasing device's resources and their rollback in case of
failure of a BAR resizing operation. Releasing resource prior to calling
pci_resize_resource() prevents PCI core from restoring the BARs as they
were.
Remove driver-side release of BARs from the amdgpu driver.
Also remove the driver initiated assignment as pci_resize_resource() should
try to assign as much as possible. If the driver side call manages to get
more required resources assigned in some scenario, such a problem should be
fixed inside pci_resize_resource() instead.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-11-ilpo.jarvinen@linux.intel.com
|
|
PCI core handles releasing device's resources and their rollback in case of
failure of a BAR resizing operation. Releasing resource prior to calling
pci_resize_resource() prevents PCI core from restoring the BARs as they
were.
Remove driver-side release of BARs from the i915 driver.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251113162628.5946-10-ilpo.jarvinen@linux.intel.com
|
|
PCI core handles releasing device's resources and their rollback in case of
failure of a BAR resizing operation. Releasing resource prior to calling
pci_resize_resource() prevents PCI core from restoring the BARs as they
were.
Remove driver-side release of BARs from the xe driver.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251113162628.5946-9-ilpo.jarvinen@linux.intel.com
|
|
As pci_resize_resource() is meant to be used also outside of PCI core,
document the interface with kerneldoc.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-8-ilpo.jarvinen@linux.intel.com
|
|
BAR resize operation is implemented in the pci_resize_resource() and
pbus_reassign_bridge_resources() functions. pci_resize_resource() can be
called either from __resource_resize_store() from sysfs or directly by the
driver for the Endpoint Device.
The pci_resize_resource() requires that caller has released the device
resources that share the bridge window with the BAR to be resized as
otherwise the bridge window is pinned in place and cannot be changed.
pbus_reassign_bridge_resources() rolls back resources if the resize
operation fails, but rollback is performed only for the bridge windows.
Because releasing the device resources are done by the caller of the BAR
resize interface, these functions performing the BAR resize do not have
access to the device resources as they were before the resize.
pbus_reassign_bridge_resources() could try __pci_bridge_assign_resources()
after rolling back the bridge windows as they were, however, it will not
guarantee the resource are assigned due to differences in how FW and the
kernel assign the resources (alignment of the start address and tail).
To perform rollback robustly, the BAR resize interface has to be altered to
also release the device resources that share the bridge window with the BAR
to be resized.
Also, remove restoring from the entries failed list as saved list should
now contain both the bridge windows and device resources so the extra
restore is duplicated work.
Some drivers (currently only amdgpu) want to prevent releasing some
resources. Add exclude_bars param to pci_resize_resource() and make amdgpu
pass its register BAR (BAR 2 or 5), which should never be released during
resize operation. Normally 64-bit prefetchable resources do not share a
bridge window with the 32-bit only register BAR, but there are various
fallbacks in the resource assignment logic which may make the resources
share the bridge window in rare cases.
This change (together with the driver side changes) is to counter the
resource releases that had to be done to prevent resource tree corruption
in the ("PCI: Release assigned resource before restoring them") change. As
such, it likely restores functionality in cases where device resources were
released to avoid resource tree conflicts which appeared to be "working"
when such conflicts were not correctly detected by the kernel.
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/linux-pci/f9a8c975-f5d3-4dd2-988e-4371a1433a60@hogyros.de/
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash amdgpu BAR selection from
https://lore.kernel.org/r/20251114103053.13778-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113162628.5946-7-ilpo.jarvinen@linux.intel.com
|
|
Freeing the saved list does not require holding pci_bus_sem, so the
critical section can be made shorter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-6-ilpo.jarvinen@linux.intel.com
|
|
Usually, resizing BARs requires releasing bridge windows in order to
resize it to fit a larger BAR into the window. This is not always the
case, however, FW could have made the window large enough to accommodate
larger BAR as is, or the user might prefer to shrink a BAR to make more
space for another Resizable BAR.
Thus, replace the check that requires that at least one bridge window
was released with a check that simply ensures bridge is not NULL.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-5-ilpo.jarvinen@linux.intel.com
|
|
Upcoming fix to BAR resize will store also device BAR resource in the
saved list. Change the pci_dev variable in the loop from 'bridge' to
'dev' as the former would be misleading with non-bridges in the list.
This is in a separate change to reduce churn in the upcoming BAR resize
fix.
While it appears that the logic in the loop doing pci_setup_bridge() is
altered as 'bridge' variable is no longer updated, a bridge should never
appear more than once in the saved list so the check can only match to the
first entry. As such, the code with two distinct pci_dev variables better
represents the intention of the check compared with the old code where
bridge variable was reused for a different purpose.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://patch.msgid.link/20251113162628.5946-4-ilpo.jarvinen@linux.intel.com
|
|
pci_rebar_set_size() adjusts BAR size for both normal and IOV BARs. The
struct pci_sriov keeps a cached copy of BAR size in ->barsz[] which is not
adjusted by pci_rebar_set_size() but by pci_iov_resource_set_size().
pci_iov_resource_set_size() is called also from
pci_resize_resource_set_size().
The current arrangement is problematic once BAR resize algorithm starts to
roll back changes properly in case of a failure. The normal resource
fitting algorithm rolls back resource size using the struct
pci_dev_resource easily but also calling pci_resize_resource_set_size() or
pci_iov_resource_set_size() to roll back BAR size would be an extra burden,
whereas combining ->barsz[] update with pci_rebar_set_size() naturally
rolls back it when restoring the old BAR size on a different layer of the
BAR resize operation.
Thus, rework pci_rebar_set_size() to also update ->barsz[].
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-3-ilpo.jarvinen@linux.intel.com
|
|
pbus_reassign_bridge_resources() saves bridge windows into the saved
list before attempting to adjust resource assignments to perform a BAR
resize operation. If resource adjustments cannot be completed fully,
rollback is attempted by restoring the resource from the saved list.
The rollback, however, does not check whether the resources it restores were
assigned by the partial resize attempt. If restore changes addresses of the
resource, it can result in corrupting the resource tree.
An example of a corrupted resource tree with overlapping addresses:
6200000000000-6203fbfffffff : pciex@620c3c0000000
6200000000000-6203fbff0ffff : PCI Bus 0030:01
6200020000000-62000207fffff : 0030:01:00.0
6200000000000-6203fbff0ffff : PCI Bus 0030:02
A resource that are assigned into the resource tree must remain
unchanged. Thus, release such a resource before attempting to restore
and claim it back.
For simplicity, always do the release and claim back for the resource
even in the cases where it is restored to the same address range.
Note: this fix may "break" some cases where devices "worked" because
the resource tree corruption allowed address space double counting to
fit more resource than what can now be assigned without double
counting. The upcoming changes to BAR resizing should address those
scenarios (to the extent possible).
Fixes: 8bb705e3e79d ("PCI: Add pci_resize_resource() for resizing BARs")
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/linux-pci/67840a16-99b4-4d8c-9b5c-4721ab0970a2@hogyros.de/
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-2-ilpo.jarvinen@linux.intel.com
|
|
Populate USB wake events for Tegra234 XUSB host controller.
These wake-up events are optional to maintain backward compatibility and
because the USB controller does not require them for normal operation.
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add to the known supported SEV-SNP policy bits that don't require any
implementation support from KVM in order to successfully use them.
At this time, this includes:
- CXL_ALLOW
- MEM_AES_256_XTS
- RAPL_DIS
- CIPHERTEXT_HIDING_DRAM
- PAGE_SWAP_DISABLE
Arguably, RAPL_DIS and CIPHERTEXT_HIDING_DRAM require KVM and the CCP
driver to enable these features in order for the setting of the policy
bits to be successfully handled. But, a guest owner may not wish their
guest to run on a system that doesn't provide support for those features,
so allowing the specification of these bits accomplishes that. Whether
or not the bit is supported by SEV firmware, a system that doesn't support
these features will either fail during the KVM validation of supported
policy bits before issuing the LAUNCH_START or fail during the
LAUNCH_START.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/ec040de9864099cf592a97c201dc4cc110b2b0cf.1761593632.git.thomas.lendacky@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Define the set of policy bits that KVM currently knows as not requiring
any implementation support within KVM. Provide this value to userspace
via the KVM_GET_DEVICE_ATTR ioctl.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/c596f7529518f3f826a57970029451d9385949e5.1761593632.git.thomas.lendacky@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Supported policy bits are dependent on the level of SEV firmware that is
currently running. Create an API to return the supported policy bits for
the current level of firmware.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/e3f711366ddc22e3dd215c987fd2e28dc1c07f54.1761593632.git.thomas.lendacky@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add USB wake events for Tegra234 so that system can be woken up from
suspend when USB devices hot-plug/unplug event is detected.
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Consolidate SEV policy bit definitions into a single file. Use
include/linux/psp-sev.h to hold the definitions and remove the current
definitions from the arch/x86/kvm/svm/sev.c and arch/x86/include/svm.h
files.
No functional change intended.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/d9639f88a0b521a1a67aeac77cc609fdea1f90bd.1761593632.git.thomas.lendacky@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixlet from Jens Axboe:
"Been sitting on this one for a week or two, planning on sending it out
when there were other block changes for 6.18. But as that hasn't
materialized in the second week of sitting on it, let's flush it out.
A previous commit updated my git tree locations, but one was missed as
it was already set to the git.kernel.org one. But the git location swap
also renamed the actual tree from linux-block to just linux, let's get
that last one updated too"
* tag 'block-6.18-20251114' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
MAINTAINERS: correct git location for block layer tree
|
|
Conform the layout, informational and status messages to KTAP. No
functional change is intended other than the layout of output messages.
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Suggested-by: Sebastian Chlad <sebastian.chlad@suse.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
- Simplify cxl_rd_ops allocation
- Group xor arithmetric setup code
- Remove local variable @inc in cxl_port_setup_targets()
|
|
Enable the preset of filter parameters from kconfig options, similar to
how other KUnit configuration parameters are handled already.
This is useful to run a subset of tests even if the cmdline is not
readily modifyable.
Link: https://lore.kernel.org/r/20251106-kunit-filter-kconfig-v1-1-d723fb7ac221@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Use the actual segments in a request when for bvec based buffers
- Fix an odd case where the iovec might get leaked for a read/write
request, if it was newly allocated, overflowed the alloc cache, and
hit an early error
- Minor tweak to the query API added in this release, returning the
number of available entries
* tag 'io_uring-6.18-20251113' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/rsrc: don't use blk_rq_nr_phys_segments() as number of bvecs
io_uring/query: return number of available queries
io_uring/rw: ensure allocated iovec gets cleared for early failure
|
|
Calculate packet parameters for video mode same way it is done for
command mode, by halving timings plugged into equations.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250909073335.91531-3-clamor95@gmail.com
|
|
Move SOL delay calculation outside of video mode conditions.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250909073335.91531-2-clamor95@gmail.com
|
|
Simplify the code by removing local variable @inc. The variable is not
used elsewhere, remove it and directly increment the target number.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20251114075844.1315805-4-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Simplify the xor arithmetric setup code by grouping it in a single
block. No need to split the block for QoS setup.
It is safe to reorder the call of cxl_setup_extended_linear_cache()
because there are no dependencies.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Tested-by: Gregory Price <gourry@gourry.net>
Link: https://patch.msgid.link/20251114075844.1315805-3-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
A root decoder's callback handlers are collected in struct cxl_rd_ops.
The structure is dynamically allocated, though it contains only a few
pointers in it. This also requires to check two pointes to check for
the existence of a callback.
Simplify the allocation, release and handler check by embedding the
ops statically in struct cxl_root_decoder.
Implementation is equivalent to how struct cxl_root_ops handles the
callbacks.
[ dj: Fix spelling error in commit log. ]
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20251114075844.1315805-2-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Move the Cadence PCIe controller RP common functions into a separate file.
The common library functions are split from legacy PCIe RP controller
functions to a separate file.
Signed-off-by: Manikandan K Pillai <mpillai@cadence.com>
[mani: removed the unused variable]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251108140305.1120117-4-hans.zhang@cixtech.com
|
|
Split the Cadence PCIe header file by moving the Legacy (LGA) controller
register definitions to a separate header file for support of next
generation PCIe controller architecture.
Signed-off-by: Manikandan K Pillai <mpillai@cadence.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251108140305.1120117-3-hans.zhang@cixtech.com
|
|
Add support for building PCI cadence platforms as a module.
Signed-off-by: Manikandan K Pillai <mpillai@cadence.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251108140305.1120117-2-hans.zhang@cixtech.com
|
|
Optimize performance of syncpoint interrupt handling by reading
the status register in 64-bit chunks when possible, and skipping
processing when the read value is zero.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250917-host1x-syncpt-irq-perf-v2-1-736ef69b1347@nvidia.com
|
|
A test case for a situation when widen_imprecise_scalars() is called
with old->allocated_stack > cur->allocated_stack. Test structure:
def widening_stack_size_bug():
r1 = 0
for r6 in 0..1:
iterator_with_diff_stack_depth(r1)
r1 = 42
def iterator_with_diff_stack_depth(r1):
if r1 != 42:
use 128 bytes of stack
iterator based loop
iterator_with_diff_stack_depth() is verified with r1 == 0 first and
r1 == 42 next. Causing stack usage of 128 bytes on a first visit and 8
bytes on a second. Such arrangement triggered a KASAN error in
widen_imprecise_scalars().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251114025730.772723-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The usage pattern for widen_imprecise_scalars() looks as follows:
prev_st = find_prev_entry(env, ...);
queued_st = push_stack(...);
widen_imprecise_scalars(env, prev_st, queued_st);
Where prev_st is an ancestor of the queued_st in the explored states
tree. This ancestor is not guaranteed to have same allocated stack
depth as queued_st. E.g. in the following case:
def main():
for i in 1..2:
foo(i) // same callsite, differnt param
def foo(i):
if i == 1:
use 128 bytes of stack
iterator based loop
Here, for a second 'foo' call prev_st->allocated_stack is 128,
while queued_st->allocated_stack is much smaller.
widen_imprecise_scalars() needs to take this into account and avoid
accessing bpf_verifier_state->frame[*]->stack out of bounds.
Fixes: 2793a8b015f7 ("bpf: exact states comparison for iterator convergence checks")
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251114025730.772723-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Tomas will start taking over managing the changes to the Real-time Linux
Analysis (RTLA) tool. Make him officially one of the maintainers.
Also update the RTLA entry to include the linux-kernel mailing list as
well as list the patchwork and git repository that the patches will go
through.
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://patch.msgid.link/20251112113556.47ec9d12@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Commit b6bcbce33596 ("soc/tegra: pmc: Ensure power-domains are in a
known state") was introduced so that all power domains get initialized
to a known working state when booting and it does this by shutting them
down (including asserting resets and disabling clocks) before registering
each power domain with the genpd framework, leaving it to each driver to
later on power its needed domains.
This caused the Google Pixel C to hang when booting due to a workaround
in the DSI driver introduced in commit b22fd0b9639e ("drm/tegra: dsi:
Clear enable register if powered by bootloader") meant to handle the case
where the bootloader enabled the DSI hardware module. The workaround relies
on reading a hardware register to determine the current status and after
b6bcbce33596 that now happens in a powered down state thus leading to
the boot hang.
Fix this by reverting b22fd0b9639e since currently we are guaranteed
that the hardware will be fully reset by the time we start enabling the
DSI module.
Fixes: b6bcbce33596 ("soc/tegra: pmc: Ensure power-domains are in a known state")
Cc: stable@vger.kernel.org
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20251103-diogo-smaug_ec_typec-v1-1-be656ccda391@tecnico.ulisboa.pt
|
|
Add a call to put_pid() corresponding to get_task_pid().
host1x_memory_context_alloc() does not take ownership of the PID so we
need to free it here to avoid leaking.
Signed-off-by: Prateek Agarwal <praagarwal@nvidia.com>
Fixes: e09db97889ec ("drm/tegra: Support context isolation")
[mperttunen@nvidia.com: reword commit message]
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250919-host1x-put-pid-v1-1-19c2163dfa87@nvidia.com
|
|
There are 2 identical "select DRM_EXEC" lines for DRM_XE.
Remove one to clean up the configuration.
Fixes: d490ecf57790 ("drm/xe: Rework xe_exec and the VM rebind worker to use the drm_exec helper")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251110232657.1807998-2-shuicheng.lin@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
After commit d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
was added, when using the 'tegra_defconfig' kernel configuration,
mounting an MMC device on Tegra20, Tegra30 and Tegra124 boards is
failing with "unknown filesystem type 'ext4'". Fix this by updating the
'tegra_defconfig' to use the EXT4 config options and remove the
obselete EXT2/3 options.
Fixes: d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Tegra210 actmon is compatible with the existing Tegra124 driver.
Describe the compatibles as such.
Acked-by: Chanwoo Choi <cw00c.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
driver_find_device() calls get_device() to increment the reference
count once a matching device is found, but there is no put_device() to
balance the reference count. To avoid reference count leakage, add
put_device() to decrease the reference count.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: a31500fe7055 ("drm/tegra: dc: Restore coupling of display controllers")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20251022114720.24937-1-make24@iscas.ac.cn
|
|
syzbot found that cls_bpf_classify() is able to change
tc_skb_cb(skb)->drop_reason triggering a warning in sk_skb_reason_drop().
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 __sk_skb_reason_drop net/core/skbuff.c:1189 [inline]
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 sk_skb_reason_drop+0x76/0x170 net/core/skbuff.c:1214
struct tc_skb_cb has been added in commit ec624fe740b4 ("net/sched:
Extend qdisc control block with tc control block"), which added a wrong
interaction with db58ba459202 ("bpf: wire in data and data_end for
cls_act_bpf").
drop_reason was added later.
Add bpf_prog_run_data_pointers() helper to save/restore the net_sched
storage colliding with BPF data_meta/data_end.
Fixes: ec624fe740b4 ("net/sched: Extend qdisc control block with tc control block")
Reported-by: syzbot <syzkaller@googlegroups.com>
Closes: https://lore.kernel.org/netdev/6913437c.a70a0220.22f260.013b.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251112125516.1563021-1-edumazet@google.com
|
|
The kernel test has reported:
BUG: unable to handle page fault for address: fffba000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
*pde = 03171067 *pte = 00000000
Oops: Oops: 0002 [#1]
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G T 6.18.0-rc2-00031-gec7f31b2a2d3 #1 NONE a1d066dfe789f54bc7645c7989957d2bdee593ca
Tainted: [T]=RANDSTRUCT
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
EIP: memset (arch/x86/include/asm/string_32.h:168 arch/x86/lib/memcpy_32.c:17)
Code: a5 8b 4d f4 83 e1 03 74 02 f3 a4 83 c4 04 5e 5f 5d 2e e9 73 41 01 00 90 90 90 3e 8d 74 26 00 55 89 e5 57 56 89 c6 89 d0 89 f7 <f3> aa 89 f0 5e 5f 5d 2e e9 53 41 01 00 cc cc cc 55 89 e5 53 57 56
EAX: 0000006b EBX: 00000015 ECX: 001fefff EDX: 0000006b
ESI: fffb9000 EDI: fffba000 EBP: c611fbf0 ESP: c611fbe8
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010287
CR0: 80050033 CR2: fffba000 CR3: 0316e000 CR4: 00040690
Call Trace:
poison_element (mm/mempool.c:83 mm/mempool.c:102)
mempool_init_node (mm/mempool.c:142 mm/mempool.c:226)
mempool_init_noprof (mm/mempool.c:250 (discriminator 1))
? mempool_alloc_pages (mm/mempool.c:640)
bio_integrity_initfn (block/bio-integrity.c:483 (discriminator 8))
? mempool_alloc_pages (mm/mempool.c:640)
do_one_initcall (init/main.c:1283)
Christoph found out this is due to the poisoning code not dealing
properly with CONFIG_HIGHMEM because only the first page is mapped but
then the whole potentially high-order page is accessed.
We could give up on HIGHMEM here, but it's straightforward to fix this
with a loop that's mapping, poisoning or checking and unmapping
individual pages.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202511111411.9ebfa1ba-lkp@intel.com
Analyzed-by: Christoph Hellwig <hch@lst.de>
Fixes: bdfedb76f4f5 ("mm, mempool: poison elements backed by slab allocator")
Cc: stable@vger.kernel.org
Tested-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251113-mempool-poison-v1-1-233b3ef984c3@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The MOCS kunit test calls KUNIT_ASSERT_TRUE_MSG() with a condition of
'true;' this prevents the assertion from ever failing. Replace
KUNIT_ASSERT_TRUE_MSG with KUNIT_FAIL_AND_ABORT to get the intended
failure behavior in cases where forcewake was not acquired successfully.
Fixes: 51c0ee84e4dc ("drm/xe/tests/mocs: Hold XE_FORCEWAKE_ALL for LNCF regs")
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251113234038.2256106-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Make sure to drop the reference taken to the AHB platform device when
looking up its driver data while enabling the SMMU.
Note that holding a reference to a device does not prevent its driver
data from going away.
Fixes: 89c788bab1f0 ("ARM: tegra: Add SMMU enabler in AHB")
Cc: stable@vger.kernel.org # 3.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Mi Pad is a tablet computer based on Nvidia Tegra K1 SoC which
originally ran the Android operating system. The Mi Pad has a 7.9" IPS
display with 1536 x 2048 (324 ppi) resolution. 2 GB of RAM and 16/64 GB
of internal memory that can be supplemented with a microSDXC card giving
up to 128 GB of additional storage.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
This eliminates a warning from the documentation build targets.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The "aotog" is an optional aperture, so if that aperture is not defined
for a given device, then initialise the 'aotag' pointer to NULL instead
of returning an error. Note that the PMC driver will not use 'aotag'
pointer if initialised to NULL.
Co-developed-by: Shardar Mohammed <smohammed@nvidia.com>
Signed-off-by: Shardar Mohammed <smohammed@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
- Fix device reference leak in hisilicon
* tag 'v6.18-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hisilicon/qm - Fix device reference leak in qm_get_qos_value
|
|
Pull smb client fixes from Steve French:
- Multichannel reconnect channel selection fix
- Fix for smbdirect (RDMA) disconnect bug
- Fix for incorrect username length check
- Fix memory leak in mount parm processing
* tag 'v6.18-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: let smbd_disconnect_rdma_connection() turn CREATED into DISCONNECTED
smb: fix invalid username check in smb3_fs_context_parse_param()
cifs: client: fix memory leak in smb3_fs_context_parse_param
smb: client: fix cifs_pick_channel when channel needs reconnect
|
