| Age | Commit message (Collapse) | Author |
|---|
|
The error that returned by ftrace_set_filter_ip() in register_fentry() is
not handled properly. Just fix it.
Fixes: 00963a2e75a8 ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20251110120705.1553694-1-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- imx: Fix reference count leak in ->remove()
- samsung: Rework legacy splash-screen handover workaround
- samsung: Fix potential memleak during ->probe()
- arm: Fix genpd leak on provider registration failure for scmi
* tag 'pmdomain-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: Fix reference count leak in imx_gpc_remove
pmdomain: samsung: Rework legacy splash-screen handover workaround
pmdomain: arm: scmi: Fix genpd leak on provider registration failure
pmdomain: samsung: plug potential memleak during probe
|
|
There are a few places where log level is not checked before calling
"verbose()". This forces programs working only at
BPF_LOG_LEVEL_STATS (e.g. veristat) to allocate unnecessarily large
log buffers. Add missing checks.
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251114200542.912386-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dave Jiang:
- Fix incorrect device handle check for Generic Initiator
- Fix offset calculation for extended linear cache poison injection
- Fix lockdep warning for hmem_register_resource()
* tag 'cxl-fixes-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
acpi/hmat: Fix lockdep warning for hmem_register_resource()
cxl: Adjust offset calculation for poison injection
acpi,srat: Fix incorrect device handle check for Generic Initiator
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into arm/fixes
TEE kernel-doc fixes for v6.18
* tag 'tee-fix-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: <uapi/linux/tee.h: fix all kernel-doc issues
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The current kernel doesn't handle unpopulated cgroups any special
regarding reclaim protection. Furthermore, this wasn't a case even when
this was introduced in
bf8d5d52ffe89 ("memcg: introduce memory.min")
Drop the incorrect documentation. (Implementation taking into account
the inner-node constraint may be added later.)
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The protection target is necessary to understand how effective reclaim
protection applies in the hierarchy.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 6.18, please pull the following:
- Andrea assigns clocks rates for the Ethernet controller for the
Raspberry Pi 5 systems
- Laurent adds an ethernet0 alias to allow client programs consuming
that alias to populate the correct Ethernet address for the Raspberry
Pi 5 systems
* tag 'arm-soc/for-6.18/devicetree-arm64-fixes-v2' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm2712: rpi-5: Add ethernet0 alias
arm64: dts: broadcom: Assign clock rates in eth node for RPi5
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.pengutronix.de/git/pza/linux into arm/fixes
Reset controller fixes for v6.18
* Fix incorrect EARC reset masks in the reset-imx8mp-audiomix driver,
introduced in commit a83bc87cd30a.
* tag 'reset-fixes-for-v6.18' of https://git.pengutronix.de/git/pza/linux:
reset: imx8mp-audiomix: Fix bad mask values
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree files updates
for 6.18, please pull the following:
- Rafal fixes the Ethernet PHY address on the Luxul XAP-1440
* tag 'arm-soc/for-6.18/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM53573: Fix address of Luxul XAP-1440's Ethernet PHY
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM64 defconfig updates for 6.18,
please pull the following:
- Stefan ensures that the clk-raspberrypi driver which is now the clock
provider is built into the kernel image to satisfy root over NFS
* tag 'arm-soc/for-6.18/defconfig-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Fix V3D deferred probe timeout
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
With the buddy lockup detector, smp_processor_id() returns the detecting CPU,
not the locked CPU, making scx_hardlockup()'s printouts confusing. Pass the
locked CPU number from watchdog_hardlockup_check() as a parameter instead.
Also add kerneldoc comments to handle_lockup(), scx_hardlockup(), and
scx_rcu_cpu_stall() documenting their return value semantics.
Suggested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.18:
- Enable ext4 support explicitly in imx_v6_v7_defconfig to fix a regression
caused by commit d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
- Correct report-rate-hz setting for imx6ull-engicam-microgea-rmm board
- Fix MSI mapping for i.MX95 PCIe endpoint device nodes
- Fix USB OTG role switching for imx8mp-kontron board
- Fix a dt-schema warning caused by audmux node for imx51-zii-rdu1 board
- Avoid gpio0_mipi_csi GPIOs being deferred for i.MX8 img subsystem
* tag 'imx-fixes-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp-kontron: Fix USB OTG role switching
arm64: dts: imx95: Fix MSI mapping for PCIe endpoint nodes
arm64: dts: imx8-ss-img: Avoid gpio0_mipi_csi GPIOs being deferred
arm: imx_v6_v7_defconfig: enable ext4 directly
ARM: dts: imx51-zii-rdu1: Fix audmux node names
ARM: dts: imx6ull-engicam-microgea-rmm: fix report-rate-hz value
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Update Krzysztof Kozlowski's email address in mailmap to stay reachable.
Link: https://patch.msgid.link/20251021095426.86549-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251031135041.78789-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
bpf_try_get_buffers() returns one of multiple per-CPU buffers based on a
per-CPU nesting counter. This mechanism expects that buffers are not
endlessly acquired before being returned. migrate_disable() ensures that a
task remains on the same CPU, but it does not prevent the task from being
preempted by another task on that CPU.
Without disabled preemption, a task may be preempted while holding a
buffer, allowing another task to run on same CPU and acquire an
additional buffer. Several such preemptions can cause the per-CPU
nest counter to exceed MAX_BPRINTF_NEST_LEVEL and trigger the warning in
bpf_try_get_buffers(). Adding preempt_disable()/preempt_enable() around
buffer acquisition and release prevents this task preemption and
preserves the intended bounded nesting behavior.
Reported-by: syzbot+b0cff308140f79a9c4cb@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68f6a4c8.050a0220.1be48.0011.GAE@google.com/
Fixes: 4223bf833c849 ("bpf: Remove preempt_disable in bpf_try_get_buffers")
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sahil Chandna <chandna.sahil@gmail.com>
Link: https://lore.kernel.org/r/20251114064922.11650-1-chandna.sahil@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes
Memory controller drivers - fixes for v6.18
Correct incorrect ID used for the memory controller client IDs in
Tegra210 Memory Controller driver, introduced in v6.18-rc1.
* tag 'memory-controller-drv-fixes-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra210: Fix incorrect client ids
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few standard fixes here, plus one more interesting one from Hans
which addresses an issue where a move in when we requested GPIOs on
ACPI systems caused us to stop doing pinmuxing and leave things
floating that we'd really rather not have floating"
* tag 'spi-fix-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Add TODO comment about ACPI GPIO setup
spi: xilinx: increase number of retries before declaring stall
spi: imx: keep dma request disabled before dma transfer setup
spi: Try to get ACPI GPIO IRQ earlier
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into arm/fixes
First batch of ASPEED fixes for 6.18
This time it's just the one fix addressing a PHY configuration regression in the
Fuji (Meta) platform's mac3 devicetree node.
* tag 'aspeed-6.18-fixes-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: dts: aspeed: fuji-data64: Enable mac3 controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
arm64: tegra: Fixes for v6.18
This contains a simple fix to mark the Ethernet PHY on Jetson Xavier NX
as a wakeup source so the device can support WoL.
* tag 'tegra-for-6.18-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Mark Jetson Xavier NX's PHY as a wakeup source
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One simple fix for a GPIO descriptor leak in the probe error handling
for the fixed regulator"
* tag 'regulator-fix-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fixed: fix GPIO descriptor leak on register failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are device-specific, and
nothing stands out.
- A regression fix for HD-audio HDMI probe
- USB-audio hardening patches for issues spotted by fuzzers
- ASoC fixes for TAS278x, SoundWire and Cirrus
- Usual HD-audio and USB-audio quirks"
* tag 'sound-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add native DSD quirks for PureAudio DAC series
ASoC: rsnd: fix OF node reference leak in rsnd_ssiu_probe()
ALSA: hda/tas2781: Correct the wrong project ID
ALSA: usb-audio: Fix NULL pointer dereference in snd_usb_mixer_controls_badd
ASoC: SDCA: bug fix while parsing mipi-sdca-control-cn-list
ALSA: usb-audio: Fix potential overflow of PCM transfer buffer
ALSA: hda/tas2781: Add new quirk for HP new projects
ASoC: tas2781: fix getting the wrong device number
ASoC: codecs: va-macro: fix resource leak in probe error path
ASoC: tas2783A: Fix issues in firmware parsing
ASoC: sdw_utils: fix device reference leak in is_sdca_endpoint_present()
ASoC: cs4271: Fix regulator leak on probe failure
ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver
ASoC: da7213: Use component driver suspend/resume
ALSA: usb-audio: add min_mute quirk for SteelSeries Arctis
ASoC: doc: cs35l56: Update firmware filename description for B0 silicon
|
|
Use new PM_RUNTIME_ACQUIRE() and PM_RUNTIME_ACQUIRE_ERR() wrapper macros
to make the code look more straightforward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
[ rjw; Typo fix in the changelog ]
Link: https://patch.msgid.link/3932581.kQq0lBPeGt@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use new PM_RUNTIME_ACQUIRE() and PM_RUNTIME_ACQUIRE_ERR() wrapper macros
to make the code look more straightforward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
[ rjw: Typo fix in the changelog ]
Link: https://patch.msgid.link/2040585.PYKUYFuaPT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add wrapper macros for ACQUIRE()/ACQUIRE_ERR() and runtime PM
usage counter guards introduced recently: pm_runtime_active_try,
pm_runtime_active_auto_try, pm_runtime_active_try_enabled, and
pm_runtime_active_auto_try_enabled.
The new macros should be more straightforward to use.
For example, they can be used for rewriting a piece of code like below:
ACQUIRE(pm_runtime_active_try, pm)(dev);
if ((ret = ACQUIRE_ERR(pm_runtime_active_try, &pm)))
return ret;
in the following way:
PM_RUNTIME_ACQUIRE(dev, pm);
if ((ret = PM_RUNTIME_ACQUIRE_ERR(&pm)))
return ret;
If the original code does not care about the specific error code
returned when attepmting to resume the device:
ACQUIRE(pm_runtime_active_try, pm)(dev);
if (ACQUIRE_ERR(pm_runtime_active_try, &pm))
return -ENXIO;
it may be changed like this:
PM_RUNTIME_ACQUIRE(dev, pm);
if (PM_RUNTIME_ACQUIRE_ERR(&pm))
return -ENXIO;
Link: https://lore.kernel.org/linux-pm/5068916.31r3eYUQgx@rafael.j.wysocki/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/3400866.aeNJFYEL58@rafael.j.wysocki
|
|
The code incorrectly assumes that the VRAM save/restore fence is valid.
Fix it by checking for error.
Fixes: 49cf1b9b609fe ("drm/xe/pf: Handle VRAM migration data as part of PF control")
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251114122339.1791026-1-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
The reference is only dropped on error. Fix it by adding the missing
xe_bo_put().
Fixes: 49cf1b9b609fe ("drm/xe/pf: Handle VRAM migration data as part of PF control")
Reported-by: Adam Miszczak <adam.miszczak@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20251114100713.1776073-1-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
If interrupted by a signal clock_nanosleep() returns the remaining time
into the structure pointed to by the rmtp parameter. So far this
functionality was not tested by the timer selftests.
Extend the nanosleep selftest to cover this feature.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251106-nanosleep-rtmp-selftest-v1-1-f9212fb295fe@linutronix.de
|
|
Several tests in the posix_timers selftest which test timer behavior
related to SIG_IGN fail on kernels older than 6.13. This is due to
a refactoring of signal handling in commit caf77435dd8a ("signal:
Handle ignored signals in do_sigaction(action != SIG_IGN)").
A previous attempt to fix this by adding a kernel version check to each
of the nine affected tests was suboptimal, as it resulted in emitting
the same skip message nine times.
Following the suggestion from Thomas Gleixner, this is refactored to
perform a single version check in main(). To satisfy the kselftest
framework's requirement for the test count to match the declared plan,
the plan is now conditionally set to 10 (for older kernels) or 19.
While setting the plan conditionally may seem complex, it is the
better approach to avoid the alternatives: either running tests on
unsupported kernels that are known to fail, or emitting a noisy series
of nine identical skip messages. A single informational message is now
printed instead when the tests are skipped.
Signed-off-by: Wake Liu <wakel@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250807085042.1690931-1-wakel@google.com/
Link: https://patch.msgid.link/20251103114502.584940-1-wakel@google.com
|
|
Signed-off-by: Jianyun Gao <jianyungao89@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20250927093411.1509275-1-jianyungao89@gmail.com
|
|
Get rid of the forward declarations of the mitigation functions by
moving their single caller below them.
No functional changes.
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20251105200447.GBaQut3w4dLilZrX-z@fat_crate.local
|
|
Currently the set_flags() of the function graph tracer has a bunch of:
if (bit == FLAG1) {
[..]
}
if (bit == FLAG2) {
[..]
}
To clean it up a bit, convert it over to a switch statement.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251114192319.117123664@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently the option to have function graph tracer to ignore time spent
when a task is sleeping is global when the interface is per-instance.
Changing the value in one instance will affect the results of another
instance that is also running the function graph tracer. This can lead to
confusing results.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251114192318.950255167@kernel.org
Fixes: c132be2c4fcc1 ("function_graph: Have the instances use their own ftrace_ops for filtering")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The option "graph-time" affects the function profiler when it is using the
function graph infrastructure. It has nothing to do with the function
graph tracer itself. The option only affects the global function profiler
and does nothing to the function graph tracer.
Move it out of the function graph tracer options and make it a global
option that is only available at the top level instance.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251114192318.781711154@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently the option to trace interrupts in the function graph tracer is
global when the interface is per-instance. Changing the value in one
instance will affect the results of another instance that is also running
the function graph tracer. This can lead to confusing results.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251114192318.613867934@kernel.org
Fixes: c132be2c4fcc1 ("function_graph: Have the instances use their own ftrace_ops for filtering")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The generic test for CC_CAN_LINK assumes that all architectures use -m32
and -m64 to switch between 32-bit and 64-bit compilation. This is overly
simplistic. Architectures may use other flags (-mabi, -m31, etc.) or may
also require byte order handling (-mlittle-endian, -EL). Expressing all
of the different possibilities will be very complicated and brittle.
Instead allow architectures to supply their own logic which will be
easy to understand and evolve.
Both the boolean ARCH_HAS_CC_CAN_LINK and the string ARCH_USERFLAGS need
to be implemented as kconfig does not allow the reuse of string options.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251114-kbuild-userprogs-bits-v3-3-4dee0d74d439@linutronix.de
Signed-off-by: Nicolas Schier <nsc@kernel.org>
|
|
The command to invoke scripts/cc-can-link.sh is very long and new usages
are about to be added.
Add a helper variable to make the code easier to read and maintain.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251114-kbuild-userprogs-bits-v3-2-4dee0d74d439@linutronix.de
Signed-off-by: Nicolas Schier <nsc@kernel.org>
|
|
It is possible that the kernel toolchain generates warnings when used
together with the system toolchain. This happens for example when the
older kernel toolchain does not handle new versions of sframe debug
information. While these warnings where ignored during the evaluation
of CC_CAN_LINK, together with CONFIG_WERROR the actual userprog build
will later fail.
Example warning:
.../x86_64-linux/13.2.0/../../../../x86_64-linux/bin/ld:
error in /lib/../lib64/crt1.o(.sframe); no .sframe will be created
collect2: error: ld returned 1 exit status
Make sure that the very simple example program does not generate
warnings already to avoid breaking the userprog compilations.
Fixes: ec4a3992bc0b ("kbuild: respect CONFIG_WERROR for linker and assembler")
Fixes: 3f0ff4cc6ffb ("kbuild: respect CONFIG_WERROR for userprogs")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251114-kbuild-userprogs-bits-v3-1-4dee0d74d439@linutronix.de
Signed-off-by: Nicolas Schier <nsc@kernel.org>
|
|
Several functions in kernel/time/tick-oneshot.c are missing parameter and
return value descriptions in their kernel-doc comments. This causes
warnings during doc generation.
Update the kernel-doc blocks to include detailed @param and Return:
descriptions for better clarity and to fix kernel-doc warnings. No
functional code changes are made.
Signed-off-by: Sunday Adelodun <adelodunolaoluwa@yahoo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251106113938.34693-3-adelodunolaoluwa@yahoo.com
|
|
Add support for booting and using NVJPG on Tegra210 to the Host1x
and TegraDRM drivers. This driver only supports the new TegraDRM uAPI.
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250630-diogo-nvjpg-v3-1-a553c7e91354@tecnico.ulisboa.pt
|
|
PCIe r7.0, sec 7.8.6, defines resizable BAR sizes beyond the currently
supported maximum of 128TB, which will require more than u32 to store the
entire bitmask.
Convert Resizable BAR related functions to use u64 bitmask for BAR sizes to
make the typing more future-proof.
The support for the larger BAR sizes themselves is not added at this point.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-12-ilpo.jarvinen@linux.intel.com
|
|
Use pci_rebar_get_max_size() to simplify amdgpu_device_resize_fb_bar().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-11-ilpo.jarvinen@linux.intel.com
|
|
Use pci_rebar_get_max_size() from PCI core in resize_vram_bar() to simplify
code.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251113180053.27944-10-ilpo.jarvinen@linux.intel.com
|
|
Add pci_rebar_get_max_size() to allow simplifying code that wants to know
the maximum possible size for a Resizable BAR.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-9-ilpo.jarvinen@linux.intel.com
|
|
PCI core provides pci_rebar_size_supported() and pci_rebar_size_to_bytes();
use them in resize_vram_bar() to simplify code.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251113180053.27944-8-ilpo.jarvinen@linux.intel.com
|
|
PCI core provides pci_rebar_size_supported() that helps in checking if an
encoded BAR Size is supported for the BAR or not. Use it in
i915_resize_lmem_bar() to simplify code.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251113180053.27944-7-ilpo.jarvinen@linux.intel.com
|
|
Many callers of pci_rebar_get_possible_sizes() are interested in finding
out if a particular encoded BAR Size (PCIe r7.0, sec 7.8.6.3) is supported
by the particular BAR.
Add pci_rebar_size_supported() into PCI core to make it easy for the
drivers to determine if the BAR size is supported or not.
Use the new function in pci_resize_resource() and in
pci_iov_vf_bar_set_size().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patch.msgid.link/20251113180053.27944-6-ilpo.jarvinen@linux.intel.com
|
|
Fix the copy-pasted errors in the Resizable BAR handling functions kernel
doc and generally improve wording choices.
Fix the formatting errors of the Return: line.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-5-ilpo.jarvinen@linux.intel.com
|
|
pci_rebar_size_to_bytes() is in drivers/pci/pci.h but would be useful for
endpoint drivers as well.
Move the function to rebar.c and export it.
In addition, convert the literal to where the number comes from
(PCI_REBAR_MIN_SIZE).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-4-ilpo.jarvinen@linux.intel.com
|
|
Move pci_rebar_bytes_to_size() from include/linux/pci.h to rebar.c as it
does not look very trivial and is not expected to be performance critical.
Convert literals to use a newly added PCI_REBAR_MIN_SIZE define.
Also add kernel doc for the function as the function is exported.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <mjruhl@habana.ai>
Link: https://patch.msgid.link/20251113180053.27944-3-ilpo.jarvinen@linux.intel.com
|
