| Age | Commit message (Collapse) | Author |
|---|
|
NVIDIA GPUs are moving away from using NV_PMC_BOOT_0 to contain
architecture and revision details, and will instead use NV_PMC_BOOT_42
in the future. NV_PMC_BOOT_0 will contain a specific set of values
that will mean "go read NV_PMC_BOOT_42 instead".
Change the selection logic in Nova so that it will claim Turing and
later GPUs. This will work for the foreseeable future, without any
further code changes here, because all NVIDIA GPUs are considered, from
the oldest supported on Linux (NV04), through the future GPUs.
Add some comment documentation to explain, chronologically, how boot0
and boot42 change with the GPU eras, and how that affects the selection
logic.
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
[acourbot@nvidia.com: remove unneeded `From<BOOT_0> for Revision`
implementation.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251115010923.1192144-4-jhubbard@nvidia.com>
|
|
This allows Architecture to be passed into register!() and bitfield!()
macro calls. That in turn requires a default implementation for
Architecture.
This simplifies transforming BOOT0 (and later, BOOT42) register values
into GPU architectures.
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Timur Tabi <ttabi@nvidia.com>
Suggested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251115010923.1192144-3-jhubbard@nvidia.com>
|
|
Allow a both Revision and Spec to be constructed directly from a
NV_PMC_BOOT_0 register.
Also, slightly enhance the comment about Spec, to be more precise.
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251115010923.1192144-2-jhubbard@nvidia.com>
|
|
Unlike standalone spi peripherals, on sama5d2, the flexcom spi have fifo
size of 32 data. Fix flexcom/spi nodes where this property is wrong.
Fixes: 6b9a3584c7ed ("ARM: dts: at91: sama5d2: Add missing flexcom definitions")
Cc: stable@vger.kernel.org # 5.8+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20251114140225.30372-1-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
After GSP initialization is complete, retrieve the static configuration
information from GSP-RM. This information includes GPU name, capabilities,
memory configuration, and other properties. On some GPU variants, it is
also required to do this for initialization to complete.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Co-developed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[acourbot@nvidia.com: properly abstract the command's bindings, add
relevant methods, make str_from_null_terminated return an Option, fix
size of GPU name array.]
Co-developed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251114195552.739371-14-joelagnelf@nvidia.com>
|
|
This adds the GSP init done command to wait for GSP initialization
to complete. Once this command has been received the GSP is fully
operational and will respond properly to normal RPC commands.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Co-developed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[acourbot@nvidia.com: move new definitions to end of commands.rs, rename
to `wait_gsp_init_done` and remove timeout argument.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251114195552.739371-13-joelagnelf@nvidia.com>
|
|
Implement core resume operation. This is the last step of the sequencer
resulting in resume of the GSP and proceeding to INIT_DONE stage of GSP
boot.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251114195552.739371-12-joelagnelf@nvidia.com>
|
|
These opcodes implement various falcon-related boot operations: reset,
start, wait-for-halt.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251114195552.739371-11-joelagnelf@nvidia.com>
|
|
Implement a sequencer opcode for delay operations.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251114195552.739371-10-joelagnelf@nvidia.com>
|
|
These opcodes are used for register write, modify, poll and store (save)
sequencer operations.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
[acourbot@nvidia.com: apply Lyude's suggested fixes.]
Message-ID: <20251114195552.739371-9-joelagnelf@nvidia.com>
|
|
Signed-off-by: Javier Garcia <rampxxxx@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
While debuggigng why X would not start on mips64 Sgi/O2 I found the
phys adress being off. Turns out the gbefb passed the internal
dma_addr as phys. May be broken pre git history. Fix by converting
dma_to_phys.
Signed-off-by: René Rebe <rene@exactco.de>
Cc: <stable@vger.kernel.org> # v4.0+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Family dev_* fn's will show device name, giving extra info to logs.
Delete the prefix `vesafb:` from msg strings, not needed now, e.g.:
vesa-framebuffer vesa-framebuffer.0: scrolling: redraw
Signed-off-by: Javier Garcia <rampxxxx@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This patch reserve and release VGA memory region.
This align with Documentation/drm/todo.rst
"Request memory regions in all fbdev drivers"
I've tested with 32bits kernel and qemu.
Signed-off-by: Javier Garcia <rampxxxx@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Use dev_*() with &dev->dev and drop the hard-coded prefix. Keep
original severities. No functional change.
Signed-off-by: Vivek BalachandharTN <vivek.balachandhar@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Implement the GSP sequencer which culminates in INIT_DONE message being
received from the GSP indicating that the GSP has successfully booted.
This is just initial sequencer support, the actual commands will be
added in the next patches.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
[acourbot@nvidia.com: move GspSequencerInfo definition before its impl
blocks and rename it to GspSequence, adapt imports in sequencer.rs to
new formatting rules, remove `timeout` argument to harmonize with other
commands.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251114195552.739371-8-joelagnelf@nvidia.com>
|
|
The RK3568 Video Capture (VICAP) unit features a MIPI CSI-2 capture
interface. Add support for the MIPI capture interface in general
and for the RK3568 VICAP MIPI capture in particular.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The RK3568 Video Capture (VICAP) unit features a Digital Video Port
(DVP). Add support for it.
Tested-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The PX30 Video Input Processor (VIP) unit features a Digital Video
Port (DVP). Add support for the DVP in general and for the PX30
VIP DVP in particular.
Tested-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add an abstraction for the DMA parts and the ping-pong scheme (a
double-buffering mechanism) of the different CIF variants. Each
stream is represented as V4L2 device whose corresponding media
entity has one sink pad. This sink pad is connected to an instance
of the INTERFACE/CROP abstraction.
Tested-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: dropped deprecated vb2_ops_wait_prepare/finish callbacks]
|
|
Add an abstraction for the INTERFACE and CROP parts of the different
Rockchip Camera Interface (CIF) variants. These parts are represented
as V4L2 subdevice with one sink pad and one source pad. The sink pad
is connected to a subdevice: either the subdevice provided by the
driver of the companion chip connected to the DVP, or the subdevice
provided by the MIPI CSI-2 receiver. The source pad is connected to
V4l2 device(s) provided by one or many instance(s) of the DMA
abstraction.
Tested-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add the skeleton for a media controller centric V4L2 driver for the
Rockchip Camera Interface (CIF).
The skeleton features support for the PX30 Video Input Processor (VIP)
and the RK3568 Video Capture (VICAP) unit.
Tested-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add documentation for the Rockchip RK3568 Video Capture (VICAP) unit.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add documentation for the Rockchip PX30 Video Input Processor (VIP).
Signed-off-by: Mehdi Djait <mehdi.djait@bootlin.com>
[revised description]
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add defines for the pixel clock sampling modes (rising edge, falling edge,
dual edge) for parallel video interfaces.
This avoids hardcoded constants in device tree sources.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add a document that describes the different variants of the Rockchip
Camera Interface (CIF), their hardware layout, as well as their
representation in the media controller centric rkcif device driver,
which is located under drivers/media/platform/rockchip/rkcif.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add several firmware bindings required by GSP sequencer code.
Co-developed-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
[acourbot@nvidia.com: remove a couple stray lines/unwanted comment
changes.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251114195552.739371-7-joelagnelf@nvidia.com>
|
|
During the sequencer process, we need to check if GSP was successfully
reloaded. Add functionality to check for the same.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251114195552.739371-6-joelagnelf@nvidia.com>
|
|
Move dma_reset so we can use it for the upcoming sequencer
functionality.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251114195552.739371-5-joelagnelf@nvidia.com>
|
|
Move falcon reading/writing to mbox functionality into helper so we can
use it from the sequencer resume flow.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
[acourbot@nvidia.com: make write/read mailbox methods unfallible.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251114195552.739371-4-joelagnelf@nvidia.com>
|
|
As the Mali-C55 driver is instrumented to work without depending on
CONFIG_PM, mark the two pm_runtime handlers as __maybe_unused to
suppress the compiler warning when compiling without CONFIG_PM.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Move start functionality into a separate helper so we can use it from
the sequencer.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251114195552.739371-3-joelagnelf@nvidia.com>
|
|
Move the "waiting until halted" functionality into a helper so that we
can use it in the sequencer, which is a separate sequencer operation.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251114195552.739371-2-joelagnelf@nvidia.com>
|
|
MSHV_VTL driver is going to be introduced, which is supposed to
provide interface for Virtual Machine Monitors (VMMs) to control
Virtual Trust Level (VTL). Export the symbols needed
to make it work (vmbus_isr, hv_context and hv_post_message).
Co-developed-by: Roman Kisel <romank@linux.microsoft.com>
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Co-developed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506110544.q0NDMQVc-lkp@intel.com/
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
STATIC_CALL_TRAMP_STR() could not be used from .S files because
static_call_types.h was not safe to include in assembly as it pulled in C
types/constructs that are unavailable under __ASSEMBLY__.
Make the header assembly-friendly by adding __ASSEMBLY__ checks and
providing only the minimal definitions needed for assembly, so that it
can be safely included by .S code. This enables emitting the static call
trampoline symbol name via STATIC_CALL_TRAMP_STR() directly in assembly
sources, to be used with 'call' instruction. Also, move a certain
definitions out of __ASSEMBLY__ checks in compiler_types.h to meet
the dependencies.
No functional change for C compilation.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The existing mshv create partition ioctl does not provide a way to
specify which cpu features are enabled in the guest. Instead, it
attempts to enable all features and those that are not supported are
silently disabled by the hypervisor.
This was done to reduce unnecessary complexity and is sufficient for
many cases. However, new scenarios require fine-grained control over
these features.
Define a new mshv_create_partition_v2 structure which supports
passing the disabled processor and xsave feature bits through to the
create partition hypercall directly.
Introduce a new flag MSHV_PT_BIT_CPU_AND_XSAVE_FEATURES which enables
the new structure. If unset, the original mshv_create_partition struct
is used, with the old behavior of enabling all features.
Co-developed-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Currently the MSHV driver rejects mappings that would overlap in
userspace.
Some VMMs require the same memory to be mapped to different parts of
the guest's address space, and so working around this restriction is
difficult.
The hypervisor itself doesn't prohibit mappings that overlap in uaddr,
(really in SPA; system physical addresses), so supporting this in the
driver doesn't require any extra work: only the checks need to be
removed.
Since no userspace code until now has been able to overlap regions in
userspace, relaxing this constraint can't break any existing code.
Signed-off-by: Magnus Kulke <magnuskulke@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The current check is incorrect; it only checks if the beginning or end
of a region is within an existing region. This doesn't account for
userspace specifying a region that begins before and ends after an
existing region.
Change the logic to a range intersection check against gfns and uaddrs
for each region.
Remove mshv_partition_region_by_uaddr() as it is no longer used.
Fixes: 621191d709b1 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs")
Reported-by: Michael Kelley <mhklinux@outlook.com>
Closes: https://lore.kernel.org/linux-hyperv/SN6PR02MB41575BE0406D3AB22E1D7DB5D4C2A@SN6PR02MB4157.namprd02.prod.outlook.com/
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Documentation/process/deprecated.rst recommends against the use of
kmalloc with dynamic size calculations due to the risk of overflow and
smaller allocation being made than the caller was expecting.
Replace kmalloc() with kmalloc_array() in hv_common.c to make the
intended allocation size clearer and avoid potential overflow issues.
The number of pages (pgcount) is bounded, so overflow is not a
practical concern here. However, using kmalloc_array() better reflects
the intent to allocate an array and improves consistency with other
allocations.
No functional change intended.
Signed-off-by: Rahul Kumar <rk0006818@gmail.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Update the log message in hv_common_init to explicitly state that the
reported version is for the Microsoft Hypervisor, not the host OS.
Previously, this message was accurate for guests running on Windows
hosts, where the host and hypervisor versions matched. With support for
Linux hosts running the Hyper-V hypervisor, the host OS and hypervisor
versions may differ.
This change avoids confusion by making it clear that the version refers to
the Microsoft Hypervisor regardless of the host operating system.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Add missing kernel-doc entry for the @size parameter in
request_arr_init(), fixing the following documentation warning
reported by the kernel test robot and detected via kernel-doc:
Warning: drivers/hv/channel.c:595 function parameter 'size' not described in 'request_arr_init'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503021934.wH1BERla-lkp@intel.com
Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Enable build of the new files introduced in the earlier commits and add
call to do the setup during boot.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
[ wei: fix build ]
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Introduce a new file to implement collection of hypervisor RAM into the
vmcore collected by linux. By default, the hypervisor RAM is locked, ie,
protected via hw page table. Hyper-V implements a disable hypercall which
essentially devirtualizes the system on the fly. This mechanism makes the
hypervisor RAM accessible to linux. Because the hypervisor RAM is already
mapped into linux address space (as reserved RAM), it is automatically
collected into the vmcore without extra work. More details of the
implementation are available in the file prologue.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Introduce a small asm stub to transition from the hypervisor to Linux
after devirtualization. Devirtualization means disabling hypervisor on
the fly, so after it is done, the code is running on physical processor
instead of virtual, and hypervisor is gone. This can be done by a
root vm only.
At a high level, during panic of either the hypervisor or the root,
the NMI handler asks hypervisor to devirtualize. As part of that,
the arguments include an entry point to return back to Linux. This asm
stub implements that entry point.
The stub is entered in protected mode, uses temporary gdt and page table
to enable long mode and get to kernel entry point which then restores full
kernel context to resume execution to kexec.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Add data structures for hypervisor crash dump support to the hypervisor
host ABI header file. Details of their usages are in subsequent commits.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
In preparation for the subsequent crashdump patches, copy two hypercall
numbers to the guest ABI header published by Hyper-V. One to notify
hypervisor of an event that occurs in the root partition, other to ask
hypervisor to disable the hypervisor.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Rename hv_machine_crash_shutdown to more appropriate
hv_guest_crash_shutdown and make it applicable to guests only. This
in preparation for the subsequent hypervisor root crash support
patches.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
./arch/x86/kernel/cpu/mshyperv.c: asm/msr.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=26164
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Also include MANA RDMA driver in the Hyper-V maintained list.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
