| Age | Commit message (Collapse) | Author |
|---|
|
On Tegra410, Compute and System GPIOs have same port names. This
results in the same GPIO names for both Compute and System GPIOs
during initialization in `tegra186_gpio_probe()`, which results in
following warnings:
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PA.00'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PA.01'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PA.02'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PB.00'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PB.01'
...
Add GPIO name prefix in the SoC data and use it to initialize the GPIO
name.
Port names remain unchanged for previous SoCs. On Tegra410, Compute
GPIOs are named COMPUTE-P<PORT>.GPIO, and System GPIOs are named
SYSTEM-P<PORT>.GPIO.
Fixes: 9631a10083d8 ("gpio: tegra186: Add support for Tegra410")
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20251113163112.885900-1-kkartik@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Allow to kill devm_gpio_request_one() independently by converting it
to use legacy APIs that will be alive a bit longer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251112093608.1481030-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Make sure we kill gpio_request_one() first by converting it to
use legacy APIs that will be alive a bit longer. In particular,
this also shows the code we will use in another function to make
it die independently.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251112093608.1481030-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git into gpio/for-next
Immutable branch between the GPIO, ASoC and regulator trees for v6.19-rc1
Add better support for GPIOs shared by multiple consumers.
|
|
Initialize result to 0 so the error path doesn't read it
uninitialized when the invoke fails. Fixes a Smatch warning.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/op-tee/7c1e0de2-7d42-4c6b-92fe-0e4fe5d650b5@oss.qualcomm.com/
Fixes: d6e290837e50 ("tee: add Qualcomm TEE driver")
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Provide an interface allowing consumers to check if a GPIO descriptor
represents a GPIO that can potentially be shared by multiple consumers
at the same time. This is exposed to allow subsystems that already
work around the limitations of the current non-exclusive GPIO handling
in some ways, to gradually convert to relying on the new shared GPIO
feature of GPIOLIB.
Extend the gpiolib-shared module to mark the GPIO shared proxy
descriptors with a flag checked by the new interface.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-6-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Some qualcomm platforms use shared GPIOs. Enable support for them by
selecting the Kconfig switch provided by GPIOLIB.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-7-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
As the final step in adding official support for shared GPIOs, enable
the previously added elements in core GPIO subsystem code. Set-up shared
GPIOs when adding a GPIO chip, tear it down on removal and check if a
GPIO descriptor looked up during the firmware-node stage is shared and
fall-back to machine lookup in this case.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-5-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add a virtual GPIO proxy driver which arbitrates access to a single
shared GPIO by multiple users. It works together with the core shared
GPIO support from GPIOLIB and functions by acquiring a reference to a
shared GPIO descriptor exposed by gpiolib-shared and making sure that
the state of the GPIO stays consistent.
In general: if there's only one user at the moment: allow it to do
anything as if this was a normal GPIO (in essence: just propagate calls
to the underlying real hardware driver). If there are more users: don't
allow to change the direction set by the initial user, allow to change
configuration options but warn about possible conflicts and finally:
treat the output-high value as a reference counted, logical "GPIO
enabled" setting, meaning: the GPIO value is set to high when the first
user requests it to be high and back to low once the last user stops
"voting" for high.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-4-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This module scans the device tree (for now only OF nodes are supported
but care is taken to make other fwnode implementations easy to
integrate) and determines which GPIO lines are shared by multiple users.
It stores that information in memory. When the GPIO chip exposing shared
lines is registered, the shared GPIO descriptors it exposes are marked
as shared and virtual "proxy" devices that mediate access to the shared
lines are created. When a consumer of a shared GPIO looks it up, its
fwnode lookup is redirected to a just-in-time machine lookup that points
to this proxy device.
This code can be compiled out on platforms which don't use shared GPIOs.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-3-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Define a new GPIO descriptor flag for marking pins that are shared by
multiple consumer. This flag will be used in several places so we need
to do it in advance and separately from other changes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-2-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Implement a function for checking if a string ends with a different
string and add its kunit test cases.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-1-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Make sure to drop the reference taken to the iommu platform device when
looking up its driver data during probe_device().
Note that commit 9826e393e4a8 ("iommu/tegra-smmu: Fix missing
put_device() call in tegra_smmu_find") fixed the leak in an error path,
but the reference is still leaking on success.
Fixes: 891846516317 ("memory: Add NVIDIA Tegra memory controller support")
Cc: stable@vger.kernel.org # 3.19: 9826e393e4a8
Cc: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Make sure to drop the reference taken to the iommu platform device when
looking up its driver data during of_xlate().
Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Cc: stable@vger.kernel.org # 5.8
Cc: Maxime Ripard <mripard@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Simplify the probe_device() error handling by dropping the iommu OF node
reference sooner.
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Make sure to drop the references taken to the iommu platform devices
when looking up their driver data during probe_device().
Note that the arch data device pointer added by commit 604629bcb505
("iommu/omap: add support for late attachment of iommu devices") has
never been used. Remove it to underline that the references are not
needed.
Fixes: 9d5018deec86 ("iommu/omap: Add support to program multiple iommus")
Fixes: 7d6827748d54 ("iommu/omap: Fix iommu archdata name for DT-based devices")
Cc: stable@vger.kernel.org # 3.18
Cc: Suman Anna <s-anna@ti.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Add the missing larb count sanity check to avoid writing beyond a fixed
sized array in case of a malformed devicetree.
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Make sure to drop the references taken to the larb devices during
probe on probe failure (e.g. probe deferral) and on driver unbind.
Fixes: b17336c55d89 ("iommu/mediatek: add support for mtk iommu generation one HW")
Cc: stable@vger.kernel.org # 4.8
Cc: Honghui Zhang <honghui.zhang@mediatek.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Make sure to drop the reference taken to the iommu platform device when
looking up its driver data during probe_device().
Fixes: b17336c55d89 ("iommu/mediatek: add support for mtk iommu generation one HW")
Cc: stable@vger.kernel.org # 4.8
Cc: Honghui Zhang <honghui.zhang@mediatek.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
As previously documented by commit 26593928564c ("iommu/mediatek: Add
error path for loop of mm_dts_parse"), the id mapping may not be linear
so the whole larb array needs to be iterated on devicetree parsing
errors.
Simplify the loop by iterating from index zero while dropping the
redundant NULL check for consistency with later cleanups.
Also add back the comment which was removed by commit 462e768b55a2
("iommu/mediatek: Fix forever loop in error handling") to prevent anyone
from trying to optimise the loop by iterating backwards from 'i'.
Cc: Yong Wu <yong.wu@mediatek.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The driver is dropping the references taken to the larb devices during
probe after successful lookup as well as on errors. This can
potentially lead to a use-after-free in case a larb device has not yet
been bound to its driver so that the iommu driver probe defers.
Fix this by keeping the references as expected while the iommu driver is
bound.
Fixes: 26593928564c ("iommu/mediatek: Add error path for loop of mm_dts_parse")
Cc: stable@vger.kernel.org
Cc: Yong Wu <yong.wu@mediatek.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Make sure to drop the reference taken to the iommu platform device when
looking up its driver data during of_xlate().
Fixes: 0df4fabe208d ("iommu/mediatek: Add mt8173 IOMMU driver")
Cc: stable@vger.kernel.org # 4.6
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Make sure to drop the reference taken to the iommu platform device when
looking up its driver data during of_xlate().
Fixes: 7b2d59611fef ("iommu/ipmmu-vmsa: Replace local utlb code with fwspec ids")
Cc: stable@vger.kernel.org # 4.14
Cc: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Make sure to drop the reference taken to the iommu platform device when
looking up its driver data during of_xlate().
Note that commit 1a26044954a6 ("iommu/exynos: add missing put_device()
call in exynos_iommu_of_xlate()") fixed the leak in a couple of error
paths, but the reference is still leaking on success.
Fixes: aa759fd376fb ("iommu/exynos: Add callback for initializing devices from device tree")
Cc: stable@vger.kernel.org # 4.2: 1a26044954a6
Cc: Yu Kuai <yukuai3@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Make sure to drop the reference taken to the iommu platform device when
looking up its driver data during of_xlate().
Note that commit e2eae09939a8 ("iommu/qcom: add missing put_device()
call in qcom_iommu_of_xlate()") fixed the leak in a couple of error
paths, but the reference is still leaking on success and late failures.
Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu")
Cc: stable@vger.kernel.org # 4.14: e2eae09939a8
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Make sure to drop the reference taken to the iommu platform device when
looking up its driver data during of_xlate().
Fixes: 46d1fb072e76 ("iommu/dart: Add DART iommu driver")
Cc: stable@vger.kernel.org # 5.15
Cc: Sven Peter <sven@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
description
In review comment for v1 of genpt documentation fixes [1], Randy
suggested that pt_test_sw_bit_acquire() parameters description
should be written using "to read". Commit e4dfaf25df1210 ("iommupt:
Describe @bitnr parameter"), however, misunderstood the review by
instead using "to read" on @bitnr parameter on both
pt_test_sw_bit_acquire() and pt_test_sw_bit_release().
Actually correct the description.
[1]: https://lore.kernel.org/linux-doc/9dba0eb7-6f32-41b7-b70b-12379364585f@infradead.org/
Fixes: e4dfaf25df1210 ("iommupt: Describe @bitnr parameter")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Add DT support for Toradex SMARC iMX95 SoM and Development carrier
board.
The module consists of an NXP i.MX95 family SoC, up to 16GB of LPDDR5
RAM and up to 128GB of storage, a USB 3.0 Host Hub and 2.0 OTG, two
Gigabit Ethernet PHYs, a 10 Gigabit Ethernet interface, an I2C EEPROM
and Temperature Sensor, an RX8130 RTC, a Quad/Dual lane CSI interface,
and some optional addons: TPM 2.0, DSI, LVDS, DisplayPort (through a
DSI-DP bridge), and Wi-Fi/BT module.
Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95
Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Co-developed-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Co-developed-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Co-developed-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Co-developed-by: Vitor Soares <vitor.soares@toradex.com>
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Co-developed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DT compatible strings for Toradex SMARC iMX95 SoM and
Toradex SMARC Development carrier board.
Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95
Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There is a spelling mistake in a ntfs_info message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
If a file's ACL can be reduced to standard mode bits, update mode
accordingly, persist the change, and update the cached ACL. This keeps
mode and ACL consistent and avoids redundant xattrs.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Add a check for minimum alignment when performing direct I/O reads. If the
file offset or user buffer is not aligned to the device's logical block
size, fall back to buffered I/O instead of continuing with unaligned direct I/O.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Add support for the NTFS3_IOC_SHUTDOWN ioctl, allowing userspace to
request a filesystem shutdown. The ioctl number is shared with other
filesystems such as ext4, exfat, and f2fs.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Fix incorrect VCN adjustments in attr_collapse_range() that caused
filesystem errors or corruption on very fragmented NTFS files when
performing collapse-range operations.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Add USB controller node for cv18xx and enable it for Huashan Pi, milkv-duo.
Co-developed-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Longbin Li <looong.bin@gmail.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20251101014329.18439-4-looong.bin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add top syscon node and all subdevice nodes for cv18xx series SoC.
Co-developed-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Longbin Li <looong.bin@gmail.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20251101014329.18439-3-looong.bin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
The Sophgo CV18XX/SG200X SoC top misc system controller provides register
access to configure related modules. It includes a usb2 phy and a dma
multiplexer.
Co-developed-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Longbin Li <looong.bin@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251101014329.18439-2-looong.bin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
strcpy() is deprecated; inline the read-only string instead. Fix the
function comment and use bool instead of int while we're at it.
Link: https://github.com/KSPP/linux/issues/88
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20251031112145.103257-2-thorsten.blum@linux.dev>
|
|
Examples (i.e. doctests) may want to show public items such as structs,
thus the `unreachable_pub` warning is not very helpful.
Thus allow it for all doctests.
In addition, remove it from the existing `expect`s we have in a couple
doctests.
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/rust-for-linux/aRG9VjsaCjsvAwUn@google.com/
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251110113528.1658238-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Fix typos in xdomain.c. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix typos in usb4.c. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix typos in tunnel.c. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix typos in tmu.c. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix typos in tb_regs.h. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix typos in tb.h. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix typos in tb.c. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix typos in switch.c. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix typos in retimer.c. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix typos in nhi.c. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix typos in lc.c. No functional changes.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
