| Age | Commit message (Collapse) | Author |
|---|
|
Expand the zl3073x_out structure to cache all output-related
hardware registers, including divisors, widths, embedded-sync
parameters and phase compensation.
Modify zl3073x_out_state_fetch() to read and populate all these
new fields at once, including zero-divisor checks. Refactor all
dpll "getter" functions in dpll.c to read from this new
cached state instead of performing direct register access.
Introduce a new function, zl3073x_out_state_set(), to handle
writing changes back to the hardware. This function compares the
provided state with the current cached state and writes *only* the
modified register values via a single mailbox sequence before
updating the local cache.
Refactor all dpll "setter" functions to modify a local copy of
the output state and then call zl3073x_out_state_set() to
commit the changes.
This change centralizes all output-related register I/O into
out.c, significantly reduces bus traffic, and simplifies the logic
in dpll.c.
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20251113074105.141379-6-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expand the zl3073x_ref structure to cache all reference-related
hardware registers, including frequency components, embedded-sync
settings and phase compensation. Previously, these registers were
read on-demand from various functions in dpll.c leading to frequent
mailbox operations.
Modify zl3073x_ref_state_fetch() to read and populate all these new
fields at once. Refactor all "getter" functions in dpll.c to read
from this new cached state instead of performing direct register
access.
Remove the standalone zl3073x_dpll_input_ref_frequency_get() helper,
as its functionality is now replaced by zl3073x_ref_freq_get() which
operates on the cached state and add a corresponding zl3073x_dev_...
wrapper.
Introduce a new function, zl3073x_ref_state_set(), to handle
writing changes back to the hardware. This function compares the
provided state with the current cached state and writes *only* the
modified register values to the device via a single mailbox sequence
before updating the local cache.
Refactor all dpll "setter" functions to modify a local copy of the
ref state and then call zl3073x_ref_state_set() to commit the changes.
As a cleanup, update callers in dpll.c that already have
a struct zl3073x_ref * to use the direct helpers instead of the
zl3073x_dev_... wrappers.
This change centralizes all reference-related register I/O into ref.c,
significantly reduces bus traffic, and simplifies the logic in dpll.c.
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20251113074105.141379-5-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of reading the ZL_REG_REF_MON_STATUS register every time
the reference status is needed, cache this value in the zl3073x_ref
struct.
This is achieved by:
* Adding a mon_status field to struct zl3073x_ref
* Introducing zl3073x_dev_ref_status_update() to read the status for
all references into this new cache field
* Calling this update function from the periodic work handler
* Adding zl3073x_ref_is_status_ok() and zl3073x_dev_ref_is_status_ok()
helpers to check the cached value
* Refactoring all callers in dpll.c to use the new
zl3073x_dev_ref_is_status_ok() helper, removing direct register reads
This change consolidates all status register reads into a single periodic
function and reduces I/O bus traffic in dpll callbacks.
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20251113074105.141379-4-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor the zl3073x driver by splitting the logic for input
references, outputs and synthesizers out of the monolithic
core.[ch] files.
Move the logic for each functional block into its own dedicated files:
ref.[ch], out.[ch] and synth.[ch].
Specifically:
- Move state structures (zl3073x_ref, zl3073x_out, zl3073x_synth)
from core.h into their respective new headers
- Move state-fetching functions (..._state_fetch) from core.c to their
new .c files
- Move the zl3073x_ref_freq_factorize helper from core.c to ref.c
- Introduce a new helper layer to decouple the core device logic from
the state-parsing logic:
1. Move the original inline helpers (e.g., zl3073x_ref_is_enabled)
to the new headers (ref.h, etc.) and make them operate on a
const struct ... * pointer.
2. Create new zl3073x_dev_... prefixed functions in core.h
(e.g., zl3073x_dev_ref_is_enabled) and Implement these _dev_ functions
to fetch state using a new ..._state_get() helper and then call
the non-prefixed helper.
3. Update all driver-internal callers (in dpll.c, prop.c, etc.) to use
the new zl3073x_dev_... functions.
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20251113074105.141379-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The zl3073x_ref, zl3073x_out and zl3073x_synth structures
previously stored state that was parsed from register reads. This
included values like boolean 'enabled' flags, synthesizer selections,
and pre-calculated frequencies.
This commit refactors the state management to store the raw register
values directly in these structures. The various inline helper functions
are updated to parse these raw values on-demand using FIELD_GET.
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20251113074105.141379-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Aswin Karuvally says:
====================
s390/qeth: Improve handling of OSA RCs
This two patch series aims to improve how return codes from OSA Express
are handled in the qeth driver.
OSA defines a number of return codes whose meaning is determined by the
issuing command, ie. they are ambiguous. The first patch moves
definitions of all return codes including the ambiguous ones to a single
enum block to aid readability and maintainability.
The second patch implements a mechanism to interpret return codes based
on the issuing command to ensure accurate debug messages. While at it,
remove extern keyword and fix indentation for function declarations to
be in line with Linux kernel coding style.
====================
Link: https://patch.msgid.link/20251113144209.2140061-1-aswin@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
OSA Express defines a number of return codes whose meaning is determined
by the issuing command, making them ambiguous. The important ones are
reported as debug messages through the s390 debug feature.
The qeth driver currently does not take the issuing command into account
when interpreting the return code which sometimes leads to incorrect
debug messages.
Implement a mechanism to interpret and report these return codes
properly. While at it, remove extern keyword and fix indentation for
function declarations to be in line with Linux kernel coding style.
Suggested-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Aswin Karuvally <aswin@linux.ibm.com>
Link: https://patch.msgid.link/20251113144209.2140061-3-aswin@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
OSA Express defines a number of return codes whose meaning is
determined by the issuing command, making them ambiguous. Move
definitions of all return codes including the ambiguous ones to a single
enum block to aid readability and maintainability.
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Aswin Karuvally <aswin@linux.ibm.com>
Link: https://patch.msgid.link/20251113144209.2140061-2-aswin@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Airoha_eth driver forwards offloaded uplink traffic (packets received
on GDM1 and forwarded to GDM{3,4}) to GDM2 in order to apply hw QoS.
This is correct if the device does not support a dedicated GDM2 port.
In this case, in order to enable hw offloading for uplink traffic,
the packets should be sent to GDM{3,4} directly.
Fixes: 9cd451d414f6 ("net: airoha: Add loopback support for GDM2")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251113-airoha-hw-offload-gdm2-fix-v1-1-7e4ca300872f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It was reported that on a card with RTL8127AF (SFP + DAC) link-up isn't
detected. Realtek hides the SFP behind the internal PHY, which isn't
behaving fully compliance with clause 22 any longer in fiber mode.
Due to not having access to chip documentation there isn't much I can
do for now. Instead of silently failing to detect link-up in fiber mode,
inform the user that fiber mode isn't support and bail out.
The logic to detect fiber mode is borrowed from Realtek's r8127 driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/fab6605a-54e2-4f54-b194-11c2b9caaaa9@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Inochi Amaoto says:
====================
net: stmmac: dwmac-sophgo: Add phy interface filter
As the SG2042 has an internal rx delay, the delay should be remove
when init the mac, otherwise the phy will be misconfigurated.
Since this delay fix is common for other MACs, add a common helper
for it. And use it to fix SG2042.
====================
Link: https://patch.msgid.link/20251114003805.494387-1-inochiama@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As the SG2042 has an internal rx delay, the delay should be removed
when initializing the mac, otherwise the phy will be misconfigurated.
Fixes: 543009e2d4cd ("net: stmmac: dwmac-sophgo: Add support for Sophgo SG2042 SoC")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Tested-by: Han Gao <rabenda.cn@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251114003805.494387-4-inochiama@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "phy-mode" property of devicetree indicates whether the PCB has
delay now, which means the mac needs to modify the PHY mode based
on whether there is an internal delay in the mac.
This modification is similar for many ethernet drivers. To simplify
code, define the helper phy_fix_phy_mode_for_mac_delays(speed, mac_txid,
mac_rxid) to fix PHY mode based on whether mac adds internal delay.
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251114003805.494387-3-inochiama@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As the ethernet controller of SG2044 and SG2042 only supports
RGMII phy. Add phy-mode property to restrict the value.
Also, since SG2042 has internal rx delay in its mac, make
only "rgmii-txid" and "rgmii-id" valid for phy-mode.
Fixes: e281c48a7336 ("dt-bindings: net: sophgo,sg2044-dwmac: Add support for Sophgo SG2042 dwmac")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251114003805.494387-2-inochiama@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'net-mana-refactor-gf-stats-handling-and-add-rx_missed_errors-counter'
Erni Sri Satya Vennela says:
====================
net: mana: Refactor GF stats handling and add rx_missed_errors counter
Restructure mana_query_gf_stats() to operate on the per-VF mana_context,
instead of per-port statistics. Introduce mana_ethtool_hc_stats to
isolate hardware counter statistics and update the
"ethtool -S <interface>" output to expose all relevant counters while
preserving backward compatibility.
Add support for the standard rx_missed_errors counter by mapping it
to the hardware's hc_rx_discards_no_wqe metric. Refresh statistics
every 2 seconds.
====================
Link: https://patch.msgid.link/1763120599-6331-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Report standard counter stats->rx_missed_errors
using hc_rx_discards_no_wqe from the hardware.
Add a global workqueue to periodically run
mana_query_gf_stats every 2 seconds to get the latest
info in eth_stats and define a driver capability flag
to notify hardware of the periodic queries.
To avoid repeated failures and log flooding, the workqueue
is not rescheduled if mana_query_gf_stats fails on HWC timeout
error and the stats are reset to 0. Other errors are transient
which will not need a VF reset for recovery.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1763120599-6331-3-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move hardware counter (HC) statistics from mana_port_context to
mana_context to enable sharing stats across multiple network ports
on the same MANA VF. Previously, each network port queried
hardware counters independently using MANA_QUERY_GF_STAT command
(GF = Generic Function stats from GDMA hardware), resulting in
redundant queries when multiple ports existed on the same device.
Isolate hardware counter stats by introducing mana_ethtool_hc_stats
in mana_context and update the code to ensure all stats are properly
reported via ethtool -S <interface>, maintaining consistency with
previous behavior.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1763120599-6331-2-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
net: stmmac: clean up plat_dat allocation/initialisation
This series cleans up the plat_dat allocation and initialisation,
moving common themes into the allocator.
This results in a nice saving:
7 files changed, 53 insertions(+), 148 deletions(-)
====================
Link: https://patch.msgid.link/aRdKVMPHXlIn457m@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PCI drivers explicitly set .pkt_route to zero. However, as the struct
is allocated using devm_kzalloc(), all members default to zero unless
explicitly initialised. Thus, explicitly setting these to zero is
unnecessary. Remove these. This leaves only stmmac_platform.c where
this is explicitly initialised depending on DT properties.
$ grep '\.pkt_route =' *.c
dwmac-intel.c: plat->rx_queues_cfg[0].pkt_route = 0x0;
dwmac-intel.c: plat->rx_queues_cfg[i].pkt_route = 0x0;
dwmac-loongson.c: plat->rx_queues_cfg[0].pkt_route = 0x0;
stmmac_main.c: if (priv->plat->rx_queues_cfg[queue].pkt_route == 0x0)
stmmac_pci.c: plat->rx_queues_cfg[0].pkt_route = 0x0;
stmmac_pci.c: plat->rx_queues_cfg[i].pkt_route = 0x0;
stmmac_platform.c: plat->rx_queues_cfg[queue].pkt_route = PACKET_AVCPQ;
stmmac_platform.c: plat->rx_queues_cfg[queue].pkt_route = PACKET_PTPQ;
stmmac_platform.c: plat->rx_queues_cfg[queue].pkt_route = PACKET_DCBCPQ;
stmmac_platform.c: plat->rx_queues_cfg[queue].pkt_route = PACKET_UPQ;
stmmac_platform.c: plat->rx_queues_cfg[queue].pkt_route = PACKET_MCBCQ;
stmmac_platform.c: plat->rx_queues_cfg[queue].pkt_route = 0x0;
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vJvjf-0000000EVkO-1ZaO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
stmmac_platform.c explicitly sets .prio to zero if the snps,priority
property is not present in DT for the queue. However, as the struct
is allocated using devm_kzalloc(), all members default to zero unless
explicitly initialised, and of_property_read_u32() will not write to
its argument if the property is not found. Thus, explicitly setting
these to zero is unnecessary. Remove these.
$ grep '\.prio =' *.c
stmmac_platform.c: plat->rx_queues_cfg[queue].prio = 0;
stmmac_platform.c: plat->tx_queues_cfg[queue].prio = 0;
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vJvja-0000000EVkI-0zUH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several drivers (see below) explicitly set the queue .use_prio
configuration to false. However, as this structure is allocated using
devm_kzalloc(), all members default to zero unless otherwise explicitly
initialised. .use_prio isn't, so defaults to false. Remove these
unnecessary initialisations, leaving stmmac_platform.c as the only
file that .use_prio is set true.
$ grep 'use_prio =' *.c
dwmac-intel.c: plat->tx_queues_cfg[0].use_prio = false;
dwmac-intel.c: plat->rx_queues_cfg[0].use_prio = false;
dwmac-intel.c: plat->rx_queues_cfg[i].use_prio = false;
dwmac-intel.c: plat->tx_queues_cfg[i].use_prio = false;
dwmac-loongson.c: plat->tx_queues_cfg[0].use_prio = false;
dwmac-loongson.c: plat->rx_queues_cfg[0].use_prio = false;
stmmac_pci.c: plat->tx_queues_cfg[0].use_prio = false;
stmmac_pci.c: plat->rx_queues_cfg[0].use_prio = false;
stmmac_pci.c: plat->tx_queues_cfg[i].use_prio = false;
stmmac_pci.c: plat->rx_queues_cfg[i].use_prio = false;
stmmac_platform.c: plat->rx_queues_cfg[queue].use_prio = false;
stmmac_platform.c: plat->rx_queues_cfg[queue].use_prio = true;
stmmac_platform.c: plat->tx_queues_cfg[queue].use_prio = false;
stmmac_platform.c: plat->tx_queues_cfg[queue].use_prio = true;
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vJvjV-0000000EVkC-0WAV@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Setup the default 1:1 RX channel map in stmmac_plat_dat_alloc() and
remove 1:1 initialisations from platform glue drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vJvjQ-0000000EVk6-05z7@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the default initialisation of plat_dat->tx_queues_to_use and
plat_dat->rx_queues_to_use to 1 to stmmac_plat_dat_alloc(). This means
platform glue only needs to override this if different.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vJvjK-0000000EVk0-3qb2@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
stmmac_plat_dat_alloc()
Move the default initialisation of plat_dat->unicast_filter_entries to
1 to stmmac_plat_dat_alloc(). This means platform glue only needs to
override this if different.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vJvjF-0000000EVju-3LfS@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
stmmac_plat_dat_alloc()
Move the default initialisation of plat_dat->multicast_filter_bins to
HASH_TABLE_SIZE to stmmac_plat_dat_alloc(). This means platform glue
only needs to override this if different.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vJvjA-0000000EVjo-2qVn@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the default initialisation of plat_dat->maxmtu to JUMBO_LEN to
stmmac_plat_dat_alloc().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vJvj5-0000000EVji-2EYA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the default initialisation of plat_dat->clk_csr to
stmmac_plat_dat_alloc().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vJvj0-0000000EVjb-1jDh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the default initialisation of plat_dat->phy_addr to
stmmac_plat_dat_alloc().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vJviv-0000000EVjV-1CLF@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a function to allocate and initialise the plat_stmmacenet_data
structure with default values.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vJviq-0000000EVjP-0c0l@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix kernel-doc warnings in mei_phy.h to avoid build warnings and to
improve and documentation:
mei_phy.h:15: warning: missing initial short description on line:
* struct nfc_mei_phy
mei_phy.h:19: warning: bad line:
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20251116070959.85055-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ret_set_ksft_status() calls ksft_status_merge() with the current return
status and the last one. It treats a non-zero return code from
ksft_status_merge() as an indication that the return status was
overwritten by the last one and therefore overwrites the return message
with the last one.
Currently, ksft_status_merge() returns a non-zero return code even if
the current return status and the last one are equal. This results in
return messages being overwritten which is counter-productive since we
are more interested in the first failure message and not the last one.
Fix by changing ksft_status_merge() to only return a non-zero return
code if the current return status was actually changed.
Add a test case which checks that the first error message is not
overwritten.
Before:
# ./lib_sh_test.sh
[...]
TEST: RET tfail2 tfail -> fail [FAIL]
retmsg=tfail expected tfail2
[...]
# echo $?
1
After:
# ./lib_sh_test.sh
[...]
TEST: RET tfail2 tfail -> fail [ OK ]
[...]
# echo $?
0
Fixes: 596c8819cb78 ("selftests: forwarding: Have RET track kselftest framework constants")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251116081029.69112-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vadim Fedorenko says:
====================
convert drivers to use ndo_hwtstamp callbacks part 4
This patchset is a subset of part 3 patchset to convert bnx2x and qede
drviers to use ndo callbacks instead ioctl to configure and report time
stamping. These drivers implemented only SIOCSHWTSTAMP command, but
converted to also provide configuration back to users. Some logic is
changed to avoid reporting configuration which is not in sync with the
HW in case of error happened.
====================
Link: https://patch.msgid.link/20251116094610.3932005-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver implemented SIOCSHWTSTAMP ioctl cmd only, but it stores
configuration in private structure, so it can be reported back to users.
Implement both ndo_hwtstamp_set and ndo_hwtstamp_set callbacks.
ndo_hwtstamp_set implements a check of unsupported 1-step timestamping
and qede_ptp_cfg_filters() becomes void as it cannot fail anymore.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251116094610.3932005-3-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver implemented SIOCSHWTSTAMP ioctl command only, but at the same
time it has configuration stored in a private structure. Implement both
ndo_hwtstamp_set and ndo_hwtstamp_get callback using stored info.
ndo_hwtstamp_set callback implements a check for unsupported 1-step
timestamping. The same check is removed from bnx2x_configure_ptp_filters
function as it's not needed anymore. Another call site of
bnx2x_configure_ptp_filters has hwtstamp_ioctl_called guard.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251116094610.3932005-2-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
selftests: mptcp: counter cache & stats before timeout
Here are a bunch of small improvements to the MPTCP selftests:
- Patch 1: move code to mptcp_lib.sh to prepare the new features.
- Patch 2: simplify mptcp_lib_pr_err_stats helper use.
- Patch 3: remove unused last column from nstat output.
- Patch 4: improve stats dump in mptcp_join.sh.
- Patch 5: get counters from nstat history and simplify mptcp_connect.sh.
- Patch 6: avoid taking the same packet trace twice.
- Patch 7: wait for an event instead of a fix time.
- Patch 8: instead of using 'timeout' and print the stats after, another
internal timeout is used: if it fires, it will print stats, then stop
everything. This avoids confusions around stats in case of timeout.
====================
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-0-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recently, some debugging happened around a test that was timing out. The
stats were showing connections being closed which was confusing because
the closing state was caused by the timeout stopping the transfer.
To avoid such confusion, the timeout is no longer done per mptcp_connect
process, but separately. In case of timeout, the stats are now printed,
then the apps are killed.
The stats will still be printed after the kill, but that's fine, and
this might even be useful, just in case. Timeout should be exceptional.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-8-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After having started mptcp_connect in listening mode,
'mptcp_lib_wait_local_port_listen' can be used to wait for the listening
socket to be ready.
This is better than using the 'sleep' command, not to pause for a fixed
amount of time, but waiting for an event. This helper is used in all
other MPTCP selftests, but not in these two.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-7-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the same netns is used for the listener and the connector, no need
to take exactly the same packet trace twice, one is enough.
This avoids confusions when the traces are the same, and wasting
resources which might not help reproducing an issue.
While at it, avoid long lines and double spaces now that these lines are
no longer aligned.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-6-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before, 'nstat' was used to retrieve each individual counter: this means
querying 4 different sources from /proc/net and iterating over 100+
counters each time. Instead, the stats could be retrieved once, and the
output file could be parsed for each counter. Even better, such file is
already present: the nstat history file.
To be able to get this working, the nstat history file also needs to
contains zero counters too, so it is still possible to know if a counter
is missing or set to 0.
This also simplifies mptcp_connect.sh: instead of checking multiple
counters before and after a test to compute the difference, the stats
history files can be reset before each test, and nstat can display only
the difference.
mptcp_lib_get_counter() continues to work when no history file is
available: by fetching nstat directly, like before. This is the case in
diag.sh and userspace_pm.sh where there is no need to save the history
file. This is also the case in mptcp_join.sh, when 'run_tests' is
executed in the background: easier to continue fetching counters than
updating the history each time it is needed.
Note: 'nstat' is called with '-s' in mptcp_lib_nstat_get(), so this
helper can be called multiple times during the test if needed.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-5-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of errors, dump the stats from history instead of using nstat.
There are multiple advantages to that:
- The same filters from pr_err_stats are used, e.g. the unused 'rate'
column is not displayed.
- The counters are closer to the ones from when the test stopped.
- While at it, the errors can be better presented: error colours, a
small indentation to distinguish the different parts, extra new lines.
Even if it should only happen in rare cases -- internal errors, or netns
issues -- if no history is available, 'nstat' is used like before, just
in case.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-4-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the MPTCP selftests, the nstat daemon is not used. It means that
the last column (the rate) is always 0.0, and that's not something
interesting to display.
Then, this last column can be filtered out.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-3-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that these files are written from MPTCP lib helpers, the stats file
paths are uniformed. Then, no need to specify them from the each
selftest.
No behavioural changes intended.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-2-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These new helpers are easier to read than the long and multi lines
commands. Plus it will ease the addition of new features related to that
in the next commits.
No behavioural changes intended.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-1-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The user and system time events can record on different CPUs, but for
all other events a single CPU map of just CPU 0 makes sense. In
parse-events detect a tool PMU and then pass the perf_event_attr so
that the tool_pmu can return CPUs specific for the event. This avoids
a CPU map of all online CPUs being used for events like
duration_time. Avoiding this avoids the evlist CPUs containing CPUs
for which duration_time just gives 0. Minimizing the evlist CPUs can
remove unnecessary sched_setaffinity syscalls that delay metric
calculations.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
walltime_nsecs_stats is no longer used for counter values, move into
that stat_config where it controls certain things like noise
measurement.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The ru_stats are used to capture user and system time stats when a
process exits. These are then applied to user and system time tool
events if their reads fail due to the process terminating. Reduce the
scope now the metric code no longer reads these values.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When reading time values for metrics don't use the globals updated in
builtin-stat, just read the events as regular events. The only
exception is for time events where nanoseconds need converting to
seconds as metrics assume time metrics are in seconds.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When running in interval mode every third count of a time event isn't
showing properly:
```
$ perf stat -e duration_time -a -I 1000
1.001082862 1,002,290,425 duration_time
2.004264262 1,003,183,516 duration_time
3.007381401 <not counted> duration_time
4.011160141 1,003,705,631 duration_time
5.014515385 1,003,290,110 duration_time
6.018539680 <not counted> duration_time
7.022065321 1,003,591,720 duration_time
```
The regression came in with a different fix, found through bisection,
commit 68cb1567439f ("perf tool_pmu: Fix aggregation on
duration_time"). The issue is caused by the enabled and running time
of the event matching the old_count's and creating a delta of 0, which
is indicative of an error.
Fixes: 68cb1567439f ("perf tool_pmu: Fix aggregation on duration_time")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Prefer perf_cpu_map__new_int(0) to perf_cpu_map__new("0") as it avoids
strings parsing.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
On hybrid platforms the CPU maps are often disjoint. Rather than copy
CPUs and trim, compute the number of common CPUs, if none early exit,
otherwise copy in an sorted order. This avoids memory allocation in
the disjoint case and avoids a second malloc and useless sort in the
previous trim cases.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
