summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-11-20netdevsim: pass packets thru GRO on RxJakub Kicinski
To replace veth in software GRO testing with netdevsim we need GRO support in netdevsim. Luckily we already have NAPI support so this change is trivial (compared to veth). Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20251120021024.2944527-9-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20selftests: net: py: read ip link info about remote devJakub Kicinski
We're already saving the info about the local dev in env.dev for the tests, save remote dev as well. This is more symmetric, env generally provides the same info for local and remote end. While at it make sure that we reliably get the detailed info about the local dev. nsim used to read the dev info without -d. Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20251120021024.2944527-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20selftests: net: py: support ksft ready without waitJakub Kicinski
There's a common synchronization problem when a script (Python test) uses a C program to set up some state (usually start a receiving process for traffic). The script needs to know when the process has fully initialized. The inverse of the problem exists for shutting the process down - we need a reliable way to tell the process to exit. We added helpers to do this safely in commit 71477137994f ("selftests: drv-net: add a way to wait for a local process") unfortunately the two operations (wait for init, and shutdown) are controlled by a single parameter (ksft_wait). Add support for using ksft_ready without using the second fd for exit. This is useful for programs which wait for a specific number of packets to rx so exit_wait is a good match, but we still need to wait for init. Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20251120021024.2944527-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20selftests: net: relocate gro and toeplitz tests to drivers/netJakub Kicinski
The GRO test can run on a real device or a veth. The Toeplitz hash test can only run on a real device. Move them from net/ to drivers/net/ and drivers/net/hw/ respectively. There are two scripts which set up the environment for these tests setup_loopback.sh and setup_veth.sh. Move those scripts to net/lib. The paths to the setup files are a little ugly but they will be deleted shortly. toeplitz_client.sh is not a test in itself, but rather a helper to send traffic, so add it to TEST_FILES rather than TEST_PROGS. Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20251120021024.2944527-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20selftests: drv-net: xdp: use variants for qstat testsJakub Kicinski
Use just-added ksft variants for XDP qstat tests. While at it correct the number of packets, we're sending 1000 packets now. Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20251120021024.2944527-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20selftests: net: py: add test variantsJakub Kicinski
There's a lot of cases where we try to re-run the same code with different parameters. We currently need to either use a generator method or create a "main" case implementation which then gets called by trivial case functions: def _test(x, y, z): ... def case_int(): _test(1, 2, 3) def case_str(): _test('a', 'b', 'c') Add support for variants, similar to kselftests_harness.h and a lot of other frameworks. Variants can be added as decorator to test functions: @ksft_variants([(1, 2, 3), ('a', 'b', 'c')]) def case(x, y, z): ... ksft_run() will auto-generate case names: case.1_2_3 case.a_b_c Because the names may not always be pretty (and to avoid forcing classes to implement case-friendly __str__()) add a wrapper class KsftNamedVariant which lets the user specify the name for the variant. Note that ksft_run's args are still supported. ksft_run splices args and variant params together. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20251120021024.2944527-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20selftests: net: py: extract the case generation logicJakub Kicinski
In preparation for adding test variants move the test case collection logic to a dedicated function. New helper returns (function, args, name, ) tuples. The main test loop can simply run them, not much logic or discernment needed. Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20251120021024.2944527-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20selftests: net: py: coding style improvementsJakub Kicinski
We're about to add more features here and finding new issues with old ones in place is hard. Address ruff checks: - bare exceptions - f-string with no params - unused import We need to use BaseException when handling defer(), as Petr points out. This retains the old behavior of ignoring SIGTERM while running cleanups. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20251120021024.2944527-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: phy: fixed_phy: remove not needed initialization of phy_device membersHeiner Kallweit
All these members are populated by the phylib state machine once the PHY has been started, based on the fixed autoneg results. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/bc666a53-5469-4e9c-85a1-dd285aadfe4f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: phy: fixed_phy: fix missing initialization of fixed phy linkHeiner Kallweit
Original change remove the link initialization from the passed struct fixed_phy_status, but @status is also passed to __fixed_phy_add(), where it is saved. Make sure that copy also has link set to 1. Fixes: 9f07af1d2742 ("net: phy: fixed_phy: initialize the link status as up") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/dab6c10e-725e-4648-9662-39cc821723d0@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: atm: fix incorrect cleanup function call in error pathSayooj K Karun
In atm_init(), if atmsvc_init() fails, the code jumps to out_atmpvc_exit label which incorrectly calls atmsvc_exit() instead of atmpvc_exit(). This results in calling the wrong cleanup function and failing to properly clean up atmpvc_init(). Fix this by calling atmpvc_exit() in the out_atmpvc_exit error path. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Sayooj K Karun <sayooj@aerlync.com> Link: https://patch.msgid.link/20251119085747.67139-1-sayooj@aerlync.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-21docs/zh_CN: Add data-integrity.rst translationke zijie
Translate .../block/data-integrity.rst into Chinese. Add data-integrity into .../block/index.rst. Update the translation through commit c6e56cf6b2e7 ("block: move integrity information into queue_limits") Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn> Reviewed-by: WangYuli <wangyl5933@chinaunicom.cn> Signed-off-by: ke zijie <kezijie@leap-io-kernel.com> Signed-off-by: Alex Shi <alexs@kernel.org>
2025-11-21docs/zh_CN: Add blk-mq.rst translationke zijie
Translate .../block/blk-mq.rst into Chinese. Add blk-mq into .../block/index.rst. Update the translation through commit 41bd33df4e18 ("docs: block: blk-mq.rst: correct places -> place") Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn> Reviewed-by: WangYuli <wangyl5933@chinaunicom.cn> Signed-off-by: ke zijie <kezijie@leap-io-kernel.com> Signed-off-by: Alex Shi <alexs@kernel.org>
2025-11-21docs/zh_CN: Add block/index.rst translationke zijie
Translate .../block/index.rst into Chinese and update subsystem-apis.rst translation. Update the translation through commit 56cdea92ed91 ("Documentation/block: drop the request.rst file") Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn> Reviewed-by: WangYuli <wangyl5933@chinaunicom.cn> Signed-off-by: ke zijie <kezijie@leap-io-kernel.com> Signed-off-by: Alex Shi <alexs@kernel.org>
2025-11-21docs/zh_CN: Update the Chinese translation of kbuild.rstChenguang Zhao
Finish the translation of kbuild/kbuild.rst. Update to commit 5cbfb4da7e06 ("kbuild: doc: improve KBUILD_BUILD_TIMESTAMP documentation") Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn> Reviewed-by: WangYuli <wanyl5933@chinaunicom.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Signed-off-by: Alex Shi <alexs@kernel.org>
2025-11-20Merge branch 'net-phy-adin1100-fix-powerdown-mode-setting'Jakub Kicinski
Alexander Dahl says: ==================== net: phy: adin1100: Fix powerdown mode setting while building a new device around the ADIN1100 I noticed some errors in kernel log when calling `ifdown` on the ethernet device. Series has a straight forward fix and an obvious follow-up code simplification. ==================== Link: https://patch.msgid.link/20251119124737.280939-1-ada@thorsis.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: phy: adin1100: Simplify register value passingAlexander Dahl
The additional use case for that variable is gone, the expression is simple enough to pass it inline now. Signed-off-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20251119124737.280939-3-ada@thorsis.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: phy: adin1100: Fix software power-down ready conditionAlexander Dahl
Value CRSM_SFT_PD written to Software Power-Down Control Register (CRSM_SFT_PD_CNTRL) is 0x01 and therefor different to value CRSM_SFT_PD_RDY (0x02) read from System Status Register (CRSM_STAT) for confirmation powerdown has been reached. The condition could have only worked when disabling powerdown (both 0x00), but never when enabling it (0x01 != 0x02). Result is a timeout, like so: $ ifdown eth0 macb f802c000.ethernet eth0: Link is Down ADIN1100 f802c000.ethernet-ffffffff:01: adin_set_powerdown_mode failed: -110 ADIN1100 f802c000.ethernet-ffffffff:01: adin_set_powerdown_mode failed: -110 Fixes: 7eaf9132996a ("net: phy: adin1100: Add initial support for ADIN1100 industrial PHY") Signed-off-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20251119124737.280939-2-ada@thorsis.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20Merge branch 'net-stmmac-simplify-axi_blen-handling'Jakub Kicinski
Russell King says: ==================== net: stmmac: simplify axi_blen handling stmmac's axi_blen (burst length) handling is very verbose and unnecessary. Firstly, the burst length register bitfield is the same across all dwmac cores, so we can use common definitions for these bits which platform glue can use. We end up with platform glue: - filling in the axi_blen[] array with the decimal burst lengths, e.g. dwmac-intel.c, etc - decoding a bitmap into burst lengths for this array, e.g. dwmac-dwc-qos-eth.c Other cases read the array from DT, placing it into the axi_blen array, and converting later to the register bitfield. This series removes all this complexity, ultimately ending up with platform glue providing the register value containing the burst length bitfield directly. Where necessary, platform glue calls stmmac_axi_blen_to_mask() to convert a decimal array (e.g. from DT) to the register value. This also means that stmmac_axi_blen_to_mask() can issue a diagnostic message at probe time if the burst length is incorrect. ==================== Link: https://patch.msgid.link/aR2aaDs6rqfu32B-@shell.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: stmmac: remove axi_blen arrayRussell King (Oracle)
Remove the axi_blen array from struct stmmac_axi as we set this array, and then immediately convert it ot the register value, never looking at the array again. Thus, the array can be function local rather than part of a run-time allocated long-lived struct. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vLfLg-0000000FMbD-1vmh@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: stmmac: move stmmac_axi_blen_to_mask() to axi_blen init sitesRussell King (Oracle)
Move stmmac_axi_blen_to_mask() to the axi->axi_blen array init sites to prepare for the removal of axi_blen. For sites which initialise axi->axi_blen with constant data, initialise axi->axi_blen_regval using the DMA_AXI_BLENx constants. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vLfLb-0000000FMb7-1SgG@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: stmmac: move stmmac_axi_blen_to_mask() to stmmac_main.cRussell King (Oracle)
Move the call to stmmac_axi_blen_to_mask() out of the individual MAC version drivers into the main code in stmmac_init_dma_engine(), passing the resulting value through a new member, axi_blen_regval, in the struct stmmac_axi structure. There is now no need for stmmac_axi_blen_to_dma_mask() to use u32p_replace_bits(), so use FIELD_PREP() instead. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vLfLW-0000000FMb1-0zKV@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: stmmac: provide common stmmac_axi_blen_to_mask()Russell King (Oracle)
Provide a common stmmac_axi_blen_to_mask() function to translate the burst length array to the value for the AXI bus mode register, and use it for dwmac, dwmac4 and dwxgmac2. Remove the now unnecessary XGMAC_BLEN* definitions. Note that stmmac_axi_blen_to_dma_mask() is coded to be more efficient than the original three implementations, and verifies the contents of the burst length array. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vLfLR-0000000FMav-0VL6@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: stmmac: move common DMA AXI register bits to common.hRussell King (Oracle)
Move the common DMA AXI register bits to common.h so they can be shared and we can provide a common function to convert the axi->dma_blen[] array to the format needed for this register. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vLfLL-0000000FMap-49gf@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: stmmac: dwc-qos-eth: simplify switch() in dwc_eth_dwmac_config_dt()Russell King (Oracle)
Simplify the switch() statement in dwc_eth_dwmac_config_dt(). Although this is not speed-critical, simplifying it can make it more readable. This also drastically improves the code emitted by the compiler. On aarch64, with the original code, the compiler loads registers with every possible value, and then has a tree of test-and-branch statements to work out which register to store. With the simplified code, the compiler can load a register with '4' and shift it appropriately. This shrinks the text size on aarch64 from 4289 bytes to 4153 bytes, a reduction of 3%. Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vLfLG-0000000FMai-3fKz@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: stmmac: rk: use phylink's interface mode for set_clk_tx_rate()Russell King (Oracle)
rk_set_clk_tx_rate() is passed the interface mode from phylink which will be the same as bsp_priv->phy_iface. Use the passed-in interface mode rather than bsp_priv->phy_iface. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vLgNA-0000000FMjN-0DSS@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20Merge branch 'net-stmmac-pass-struct-device-to-init-exit'Jakub Kicinski
Russell King says: ==================== net: stmmac: pass struct device to init/exit Rather than passing the platform device to the ->init() and ->exit() methods, make these methods useful for other devices by passing the struct device instead. Update the implementations appropriately for this change. Move the calls for these methods into the core driver's probe and remove methods from the stmmac_platform layer. Convert dwmac-rk to use ->init() and ->exit(). ==================== Link: https://patch.msgid.link/aR2V0Kib7j0L4FNN@shell.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: stmmac: rk: convert to init()/exit() methodsRussell King (Oracle)
Convert rk to use the init() and exit() methods for powering up and down the device. This allows us to use the pltfr versions of probe() and remove(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vLf2e-0000000FMNN-1Xnh@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: stmmac: move probe/remove calling of init/exitRussell King (Oracle)
Move the probe/remove time calling of the init()/exit() methods in the platform data to the main driver probe/remove functions. This allows them to be used by non-platform_device based drivers. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/E1vLf2Z-0000000FMNH-0xPV@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: stmmac: pass struct device to init()/exit() methodsRussell King (Oracle)
As struct plat_stmmacenet_data is not platform_device specific, pass a struct device into the init() and exit() methods to allow them to become independent of the underlying device. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Chen-Yu Tsai <wens@kernel.org> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/E1vLf2U-0000000FMN2-0SLg@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20Merge branch 'tcp-tcp_rcvbuf_grow-changes'Jakub Kicinski
Eric Dumazet says: ==================== tcp: tcp_rcvbuf_grow() changes First pach is minor and moves tcp_moderate_rcvbuf in appropriate group. Second patch is another attempt to keep small sk->sk_rcvbuf for DC (small RT) TCP flows for optimal performance. ==================== Link: https://patch.msgid.link/20251119084813.3684576-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20tcp: add net.ipv4.tcp_rcvbuf_low_rttEric Dumazet
This is a follow up of commit aa251c84636c ("tcp: fix too slow tcp_rcvbuf_grow() action") which brought again the issue that I tried to fix in commit 65c5287892e9 ("tcp: fix sk_rcvbuf overshoot") We also recently increased tcp_rmem[2] to 32 MB in commit 572be9bf9d0d ("tcp: increase tcp_rmem[2] to 32 MB") Idea of this patch is to not let tcp_rcvbuf_grow() grow sk->sk_rcvbuf too fast for small RTT flows. If sk->sk_rcvbuf is too big, this can force NIC driver to not recycle pages from their page pool, and also can cause cache evictions for DDIO enabled cpus/NIC, as receivers are usually slower than senders. Add net.ipv4.tcp_rcvbuf_low_rtt sysctl, set by default to 1000 usec (1 ms) If RTT if smaller than the sysctl value, use the RTT/tcp_rcvbuf_low_rtt ratio to control sk_rcvbuf inflation. Tested: Pair of hosts with a 200Gbit IDPF NIC. Using netperf/netserver Client initiates 8 TCP bulk flows, asking netserver to use CPU #10 only. super_netperf 8 -H server -T,10 -l 30 On server, use perf -e tcp:tcp_rcvbuf_grow while test is running. Before: sysctl -w net.ipv4.tcp_rcvbuf_low_rtt=1 perf record -a -e tcp:tcp_rcvbuf_grow sleep 30 ; perf script|tail -20|cut -c30-230 1153.051201: tcp:tcp_rcvbuf_grow: time=398 rtt_us=382 copied=6905856 inq=180224 space=6115328 ooo=0 scaling_ratio=240 rcvbuf=27666235 rcv_ssthresh=25878235 window_clamp=25937095 rcv_wnd=25600000 famil 1153.138752: tcp:tcp_rcvbuf_grow: time=446 rtt_us=413 copied=5529600 inq=180224 space=4505600 ooo=0 scaling_ratio=240 rcvbuf=23068672 rcv_ssthresh=21571860 window_clamp=21626880 rcv_wnd=21286912 famil 1153.361484: tcp:tcp_rcvbuf_grow: time=415 rtt_us=380 copied=7061504 inq=204800 space=6725632 ooo=0 scaling_ratio=240 rcvbuf=27666235 rcv_ssthresh=25878235 window_clamp=25937095 rcv_wnd=25600000 famil 1153.457642: tcp:tcp_rcvbuf_grow: time=483 rtt_us=421 copied=5885952 inq=720896 space=4407296 ooo=0 scaling_ratio=240 rcvbuf=23763511 rcv_ssthresh=22223271 window_clamp=22278291 rcv_wnd=21430272 famil 1153.466002: tcp:tcp_rcvbuf_grow: time=308 rtt_us=281 copied=3244032 inq=180224 space=2883584 ooo=0 scaling_ratio=240 rcvbuf=44854314 rcv_ssthresh=41992059 window_clamp=42050919 rcv_wnd=41713664 famil 1153.747792: tcp:tcp_rcvbuf_grow: time=394 rtt_us=332 copied=4460544 inq=585728 space=3063808 ooo=0 scaling_ratio=240 rcvbuf=44854314 rcv_ssthresh=41992059 window_clamp=42050919 rcv_wnd=41373696 famil 1154.260747: tcp:tcp_rcvbuf_grow: time=652 rtt_us=226 copied=10977280 inq=737280 space=9486336 ooo=0 scaling_ratio=240 rcvbuf=31165538 rcv_ssthresh=29197743 window_clamp=29217691 rcv_wnd=28368896 fami 1154.375019: tcp:tcp_rcvbuf_grow: time=461 rtt_us=443 copied=7573504 inq=507904 space=6856704 ooo=0 scaling_ratio=240 rcvbuf=27666235 rcv_ssthresh=25878235 window_clamp=25937095 rcv_wnd=25288704 famil 1154.463072: tcp:tcp_rcvbuf_grow: time=494 rtt_us=408 copied=7983104 inq=200704 space=7065600 ooo=0 scaling_ratio=240 rcvbuf=27666235 rcv_ssthresh=25878235 window_clamp=25937095 rcv_wnd=25579520 famil 1154.474658: tcp:tcp_rcvbuf_grow: time=507 rtt_us=459 copied=5586944 inq=540672 space=4718592 ooo=0 scaling_ratio=240 rcvbuf=17852266 rcv_ssthresh=16692999 window_clamp=16736499 rcv_wnd=16056320 famil 1154.584657: tcp:tcp_rcvbuf_grow: time=494 rtt_us=427 copied=8126464 inq=204800 space=7782400 ooo=0 scaling_ratio=240 rcvbuf=27666235 rcv_ssthresh=25878235 window_clamp=25937095 rcv_wnd=25600000 famil 1154.702117: tcp:tcp_rcvbuf_grow: time=480 rtt_us=406 copied=5734400 inq=180224 space=5349376 ooo=0 scaling_ratio=240 rcvbuf=23068672 rcv_ssthresh=21571860 window_clamp=21626880 rcv_wnd=21286912 famil 1155.941595: tcp:tcp_rcvbuf_grow: time=717 rtt_us=670 copied=11042816 inq=3784704 space=7159808 ooo=0 scaling_ratio=240 rcvbuf=19581357 rcv_ssthresh=18333222 window_clamp=18357522 rcv_wnd=14614528 fam 1156.384735: tcp:tcp_rcvbuf_grow: time=529 rtt_us=473 copied=9011200 inq=180224 space=7258112 ooo=0 scaling_ratio=240 rcvbuf=19581357 rcv_ssthresh=18333222 window_clamp=18357522 rcv_wnd=18018304 famil 1157.821676: tcp:tcp_rcvbuf_grow: time=529 rtt_us=272 copied=8224768 inq=602112 space=6545408 ooo=0 scaling_ratio=240 rcvbuf=67000000 rcv_ssthresh=62793576 window_clamp=62812500 rcv_wnd=62115840 famil 1158.906379: tcp:tcp_rcvbuf_grow: time=710 rtt_us=445 copied=11845632 inq=540672 space=10240000 ooo=0 scaling_ratio=240 rcvbuf=31165538 rcv_ssthresh=29205935 window_clamp=29217691 rcv_wnd=28536832 fam 1164.600160: tcp:tcp_rcvbuf_grow: time=841 rtt_us=430 copied=12976128 inq=1290240 space=11304960 ooo=0 scaling_ratio=240 rcvbuf=31165538 rcv_ssthresh=29212591 window_clamp=29217691 rcv_wnd=27856896 fa 1165.163572: tcp:tcp_rcvbuf_grow: time=845 rtt_us=800 copied=12632064 inq=540672 space=7921664 ooo=0 scaling_ratio=240 rcvbuf=27666235 rcv_ssthresh=25912795 window_clamp=25937095 rcv_wnd=25260032 fami 1165.653464: tcp:tcp_rcvbuf_grow: time=388 rtt_us=309 copied=4493312 inq=180224 space=3874816 ooo=0 scaling_ratio=240 rcvbuf=44854314 rcv_ssthresh=41995899 window_clamp=42050919 rcv_wnd=41713664 famil 1166.651211: tcp:tcp_rcvbuf_grow: time=556 rtt_us=553 copied=6328320 inq=540672 space=5554176 ooo=0 scaling_ratio=240 rcvbuf=23068672 rcv_ssthresh=21571860 window_clamp=21626880 rcv_wnd=20946944 famil After: sysctl -w net.ipv4.tcp_rcvbuf_low_rtt=1000 perf record -a -e tcp:tcp_rcvbuf_grow sleep 30 ; perf script|tail -20|cut -c30-230 1457.053149: tcp:tcp_rcvbuf_grow: time=128 rtt_us=24 copied=1441792 inq=40960 space=1269760 ooo=0 scaling_ratio=240 rcvbuf=2960741 rcv_ssthresh=2605474 window_clamp=2775694 rcv_wnd=2568192 family=AF_I 1458.000778: tcp:tcp_rcvbuf_grow: time=128 rtt_us=31 copied=1441792 inq=24576 space=1400832 ooo=0 scaling_ratio=240 rcvbuf=3060163 rcv_ssthresh=2810042 window_clamp=2868902 rcv_wnd=2674688 family=AF_I 1458.088059: tcp:tcp_rcvbuf_grow: time=190 rtt_us=110 copied=3227648 inq=385024 space=2781184 ooo=0 scaling_ratio=240 rcvbuf=6728240 rcv_ssthresh=6252705 window_clamp=6307725 rcv_wnd=5799936 family=AF 1458.148549: tcp:tcp_rcvbuf_grow: time=232 rtt_us=129 copied=3956736 inq=237568 space=2842624 ooo=0 scaling_ratio=240 rcvbuf=6731333 rcv_ssthresh=6252705 window_clamp=6310624 rcv_wnd=5918720 family=AF 1458.466861: tcp:tcp_rcvbuf_grow: time=193 rtt_us=83 copied=2949120 inq=180224 space=2457600 ooo=0 scaling_ratio=240 rcvbuf=5751438 rcv_ssthresh=5357689 window_clamp=5391973 rcv_wnd=5054464 family=AF_ 1458.775476: tcp:tcp_rcvbuf_grow: time=257 rtt_us=127 copied=4304896 inq=352256 space=3346432 ooo=0 scaling_ratio=240 rcvbuf=8067131 rcv_ssthresh=7523275 window_clamp=7562935 rcv_wnd=7061504 family=AF 1458.776631: tcp:tcp_rcvbuf_grow: time=200 rtt_us=96 copied=3260416 inq=143360 space=2768896 ooo=0 scaling_ratio=240 rcvbuf=6397256 rcv_ssthresh=5938567 window_clamp=5997427 rcv_wnd=5828608 family=AF_ 1459.707973: tcp:tcp_rcvbuf_grow: time=215 rtt_us=96 copied=2506752 inq=163840 space=1388544 ooo=0 scaling_ratio=240 rcvbuf=3068867 rcv_ssthresh=2768282 window_clamp=2877062 rcv_wnd=2555904 family=AF_ 1460.246494: tcp:tcp_rcvbuf_grow: time=231 rtt_us=80 copied=3756032 inq=204800 space=3117056 ooo=0 scaling_ratio=240 rcvbuf=7288091 rcv_ssthresh=6773725 window_clamp=6832585 rcv_wnd=6471680 family=AF_ 1460.714596: tcp:tcp_rcvbuf_grow: time=270 rtt_us=110 copied=4714496 inq=311296 space=3719168 ooo=0 scaling_ratio=240 rcvbuf=8957739 rcv_ssthresh=8339020 window_clamp=8397880 rcv_wnd=7933952 family=AF 1462.029977: tcp:tcp_rcvbuf_grow: time=101 rtt_us=19 copied=1105920 inq=40960 space=1036288 ooo=0 scaling_ratio=240 rcvbuf=2338970 rcv_ssthresh=2091684 window_clamp=2192784 rcv_wnd=1986560 family=AF_I 1462.802385: tcp:tcp_rcvbuf_grow: time=89 rtt_us=45 copied=1069056 inq=0 space=1064960 ooo=0 scaling_ratio=240 rcvbuf=2338970 rcv_ssthresh=2091684 window_clamp=2192784 rcv_wnd=2035712 family=AF_INET6 1462.918648: tcp:tcp_rcvbuf_grow: time=105 rtt_us=33 copied=1441792 inq=180224 space=1069056 ooo=0 scaling_ratio=240 rcvbuf=2383282 rcv_ssthresh=2091684 window_clamp=2234326 rcv_wnd=1896448 family=AF_ 1463.222533: tcp:tcp_rcvbuf_grow: time=273 rtt_us=144 copied=4603904 inq=385024 space=3469312 ooo=0 scaling_ratio=240 rcvbuf=8422564 rcv_ssthresh=7891053 window_clamp=7896153 rcv_wnd=7409664 family=AF 1466.519312: tcp:tcp_rcvbuf_grow: time=130 rtt_us=23 copied=1343488 inq=0 space=1261568 ooo=0 scaling_ratio=240 rcvbuf=2780158 rcv_ssthresh=2493778 window_clamp=2606398 rcv_wnd=2494464 family=AF_INET6 1466.681003: tcp:tcp_rcvbuf_grow: time=128 rtt_us=21 copied=1441792 inq=12288 space=1343488 ooo=0 scaling_ratio=240 rcvbuf=2932027 rcv_ssthresh=2578555 window_clamp=2748775 rcv_wnd=2568192 family=AF_I 1470.689959: tcp:tcp_rcvbuf_grow: time=255 rtt_us=122 copied=3932160 inq=204800 space=3551232 ooo=0 scaling_ratio=240 rcvbuf=8182038 rcv_ssthresh=7647384 window_clamp=7670660 rcv_wnd=7442432 family=AF 1471.754154: tcp:tcp_rcvbuf_grow: time=188 rtt_us=95 copied=2138112 inq=577536 space=1429504 ooo=0 scaling_ratio=240 rcvbuf=3113650 rcv_ssthresh=2806426 window_clamp=2919046 rcv_wnd=2248704 family=AF_ 1476.813542: tcp:tcp_rcvbuf_grow: time=269 rtt_us=99 copied=3088384 inq=180224 space=2564096 ooo=0 scaling_ratio=240 rcvbuf=6219470 rcv_ssthresh=5771893 window_clamp=5830753 rcv_wnd=5509120 family=AF_ 1477.738309: tcp:tcp_rcvbuf_grow: time=166 rtt_us=54 copied=1777664 inq=180224 space=1417216 ooo=0 scaling_ratio=240 rcvbuf=3117118 rcv_ssthresh=2874958 window_clamp=2922298 rcv_wnd=2613248 family=AF_ We can see sk_rcvbuf values are much smaller, and that rtt_us (estimation of rtt from a receiver point of view) is kept small, instead of being bloated. No difference in throughput. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Tested-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/20251119084813.3684576-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20tcp: tcp_moderate_rcvbuf is only used in rx pathEric Dumazet
sysctl_tcp_moderate_rcvbuf is only used from tcp_rcvbuf_grow(). Move it to netns_ipv4_read_rx group. Remove various CACHELINE_ASSERT_GROUP_SIZE() from netns_ipv4_struct_check(), as they have no real benefit but cause pain for all changes. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20251119084813.3684576-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20Merge branch 'net-mdio-improve-reset-handling-of-mdio-devices'Jakub Kicinski
Buday Csaba says: ==================== net: mdio: improve reset handling of mdio devices This patchset refactors and slightly improves the reset handling of `mdio_device`. The patches were split from a larger series, discussed previously in the links below. The difference between v2 and v3, is that the helper function declarations have been moved to a new header file: drivers/net/phy/mdio-private.h See links for the previous versions, and for the now separate leak fix. ==================== Link: https://patch.msgid.link/cover.1763473655.git.buday.csaba@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: mdio: improve reset handling in mdio_device.cBuday Csaba
Change fwnode_property_read_u32() in mdio_device_register_reset() to device_property_read_u32(), which is more appropriate here. Make mdio_device_unregister_reset() truly reverse mdio_device_register_reset() by setting the internal fields to their default values. Signed-off-by: Buday Csaba <buday.csaba@prolan.hu> Link: https://patch.msgid.link/641df1488517ae71ba10158ec1e38424211d8651.1763473655.git.buday.csaba@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: mdio: common handling of phy device reset propertiesBuday Csaba
Unify the handling of the per device reset properties for `mdio_device`. Merge mdio_device_register_gpiod() and mdio_device_register_reset() into mdio_device_register_reset(), that handles both reset-controllers and reset-gpios. Move reading of the reset firmware properties (reset-assert-us, reset-deassert-us) from fwnode_mdio.c to mdio_device_register_reset(), so all reset related initialization code is kept in one place. Introduce mdio_device_unregister_reset() to release the associated resources. These changes make tracking the reset properties easier. Added kernel-doc for mdio_device_register/unregister_reset(). Signed-off-by: Buday Csaba <buday.csaba@prolan.hu> Link: https://patch.msgid.link/17c216efd7a47be17db104378b6aacfc8741d8b9.1763473655.git.buday.csaba@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: mdio: move device reset functions to mdio_device.cBuday Csaba
The functions mdiobus_register_gpiod() and mdiobus_register_reset() handle the mdio device reset initialization, which belong to mdio_device.c. Move them from mdio_bus.c to mdio_device.c, and rename them to match the corresponding source file: mdio_device_register_gpio() and mdio_device_register_reset(). Remove 'static' qualifiers and declare them in drivers/net/phy/mdio-private.h (new header file). Signed-off-by: Buday Csaba <buday.csaba@prolan.hu> Link: https://patch.msgid.link/5f684838ee897130f21b21beb07695eea4af8988.1763473655.git.buday.csaba@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20KVM: selftests: Add a VMX test for LA57 nested stateJim Mattson
Add a selftest that verifies KVM's ability to save and restore nested state when the L1 guest is using 5-level paging and the L2 guest is using 4-level paging. Specifically, canonicality tests of the VMCS12 host-state fields should accept 57-bit virtual addresses. Signed-off-by: Jim Mattson <jmattson@google.com> Link: https://patch.msgid.link/20251028225827.2269128-5-jmattson@google.com [sean: rename to vmx_nested_la57_state_test to prep nested_<test> namespace] Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-11-20KVM: selftests: Change VM_MODE_PXXV48_4K to VM_MODE_PXXVYY_4KJim Mattson
Use 57-bit addresses with 5-level paging on hardware that supports LA57. Continue to use 48-bit addresses with 4-level paging on hardware that doesn't support LA57. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Link: https://patch.msgid.link/20251028225827.2269128-4-jmattson@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-11-20KVM: selftests: Use a loop to walk guest page tablesJim Mattson
Walk the guest page tables via a loop when searching for a PTE, instead of using unique variables for each level of the page tables. This simplifies the code and makes it easier to support 5-level paging in the future. Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev> Link: https://patch.msgid.link/20251028225827.2269128-3-jmattson@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-11-20KVM: selftests: Use a loop to create guest page tablesJim Mattson
Walk the guest page tables via a loop when creating new mappings, instead of using unique variables for each level of the page tables. This simplifies the code and makes it easier to support 5-level paging in the future. Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev> Link: https://patch.msgid.link/20251028225827.2269128-2-jmattson@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-11-20KVM: selftests: Remove the unused argument to prepare_eptp()Yosry Ahmed
eptp_memslot is unused, remove it. No functional change intended. Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev> Link: https://patch.msgid.link/20251021074736.1324328-10-yosry.ahmed@linux.dev Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-11-20KVM: selftests: Stop hardcoding PAGE_SIZE in x86 selftestsYosry Ahmed
Use PAGE_SIZE instead of 4096. Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev> Link: https://patch.msgid.link/20251021074736.1324328-9-yosry.ahmed@linux.dev Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-11-20KVM: selftests: Extend vmx_tsc_adjust_test to cover SVMYosry Ahmed
Add SVM L1 code to run the nested guest, and allow the test to run with SVM as well as VMX. Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev> Link: https://patch.msgid.link/20251021074736.1324328-8-yosry.ahmed@linux.dev Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-11-20KVM: selftests: Extend nested_invalid_cr3_test to cover SVMYosry Ahmed
Add SVM L1 code to run the nested guest, and allow the test to run with SVM as well as VMX. Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev> Link: https://patch.msgid.link/20251021074736.1324328-7-yosry.ahmed@linux.dev Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-11-20KVM: selftests: Move nested invalid CR3 check to its own testYosry Ahmed
vmx_tsc_adjust_test currently verifies that a nested VMLAUNCH fails with an invalid CR3. This is irrelevant to TSC scaling, move it to a standalone test. Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev> Link: https://patch.msgid.link/20251021074736.1324328-6-yosry.ahmed@linux.dev Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-11-20KVM: selftests: Extend vmx_nested_tsc_scaling_test to cover SVMYosry Ahmed
Add SVM L1 code to run the nested guest, and allow the test to run with SVM as well as VMX. Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev> Link: https://patch.msgid.link/20251021074736.1324328-5-yosry.ahmed@linux.dev Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-11-20KVM: selftests: Extend vmx_close_while_nested_test to cover SVMYosry Ahmed
Add SVM L1 code to run the nested guest, and allow the test to run with SVM as well as VMX. Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev> Link: https://patch.msgid.link/20251021074736.1324328-4-yosry.ahmed@linux.dev [sean: rename to "nested_close_kvm_test" to provide nested_* sorting] Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-11-21Merge tag 'drm-msm-next-2025-11-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Changes for v6.19: GPU: - Gen8 support: A840 (Kaanapali) and X2-85 (Glymur) - A612 support - A few NULL check fixes MDSS: - Added support for Glymur and QCS8300 platforms DPU: - Enabled Quad-Pipe support, unlocking higher resolutions support - Added support for Glymur platform - Documented DPU on QCS8300 platform as supported - Misc small fixes DisplayPort: - Added support for Glymur platform - Added support lame remapping inside DP block - Documented DisplayPort controller on QCS8300 and SM6150/QCS615 as supported Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <rob.clark@oss.qualcomm.com> Link: https://patch.msgid.link/CACSVV00sFi65XrZipHCU3C0bYji7vgu7OgWvLeOQ1Cg475_pUA@mail.gmail.com
2025-11-21Merge tag 'v6.18-rc6' into drm-nextDave Airlie
Linux 6.18-rc6 Backmerge in order to merge msm next Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.3 (git 2.53.0) at 2026-10-17 06:32:50 +0000